Plz help i need urgent support on issue of my subs...

I have been a paid skype user for over 12 Months and i have my Europe Extra for which i pay each month it says that i can have a free online number but before i signed up for this service i already had purchased an online number for 12 Months, which is now due to expire in a day.
Please skype admin team tell me how can i use my online number offer for keeping this number, rather then paying extra money once more

Use the web chat:
Contact Customer Care

Similar Messages

  • I want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

    i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent, i want to delete my data from iphone while i doesnot have the access but i know my apple id so plz help me its urgent

    Welcome to the Apple Community.
    You can only wipe your device when it is logged into iCloud and 'Find My Phone' is enabled, additionally the device will need to be switched on and connected to a wifi or cellular network.
    Unfortunately, you cannot activate iCloud or 'Find My Phone' remotely.

  • In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    In the new mail app for OSX v10.7 Lion it seems I can only setup my gmail account as an "imap", when I need to set it up as "pop"... PLZ HELP I NEED MY MAIL TO WORK!!!

    Go to System prefs
    Select Mail Contacts and Calendars
    Then select Other
    Then select "Add a Mail Account and click create
    Then go to google for the settings you need:
    First here for the settings online at gmail
    Then here for the setting in mail
    These are instructions for Mail 4.0 but all of the necessary settings should be listed.

  • Plz help me its urgent i have iphone i dnt want my deleted texts my phone was jailbroken if i do restore widout backup should i jailbreak again ,should i unlock again,will the data of texts premantly erased plz answr me

    Plz help me its urgent i have iphone i dnt want my deleted texts my phone was jailbroken if i do restore widout backup should i jailbreak again ,should i unlock again,will the data of texts premantly erased plz answr me

    Jailbroken phones cannot be discussed in an Apple forum. If you synced your phone with your computer the texts will be in the backup, so if you restore the backup you may get them back, but with a jailbroken phone it's anybody's guess what will happen.

  • How to write code for this logic, plz help me very urgent

    Hi All,
    i am new to sap-abap, i got this work and i m working on this can any body help me in writing code, plz help me, this is very very urgent.
    here  i m giving my logic, can anybody send me the code related to this logic.
    this is very urgent .
    this program o/p should be in ALV format and need to create one commond 'SAVE" on this o/t list  if  user clicks save processedon and processedby fields in ZFIBUE should be updated automatically.
    i am creating one custom table zfibue having fields: (serialno, bukrs, matnr,prdha,hkont,gsber,wrbtr,budat, credate, cretime,processed, processedon, processedby,mapped)
    fields of zfibue:
    serailno = numc
    bukrs = char
    matnr = char
    prdha = char
    hkont = char
    gsber = char
    wrbtr = char
    budat = date
    credate = date
    cretime = time
    processed= char
    processedon = date
    processedby = char
    mapped = char      are   belongs to above type data types
    and seelct-optionfields:  s_bukrs for bseg-bukrs
                                        s_hkont for bseg-hkont,
                                         s_budat for bkpf-budat,
                                         s_processed for zfibue-processed,
                                          s_processedon for zfibue-processedon,
                                          s_mapped. for zfibue-mapped
    parameters: p_chk1 as checkbox,
                      p_chk2 as checkbox.
                      p_filepath type rlgrap-filename.
    1.1 Validate the user inputs (S_BUKRS and S_HKONT) against respective check tables (T001 and SKB1). If the validation fails, provide respective error message. Eg: “Invalid input for Company Code”.
    1.3 If P_CHK2 = ‘X’, go to step 1.11. Else continue.
    1.4 If P_CHK1 = ‘X’, continue. Else go to step 1.9
    1.5 Fetch MATNR, PRDHA from MARA into GT_MARA for all entries in GT_ZFIBUE where MATNR = GT_ZFIBUE-MATNR.
    1.6 Sort and delete adjacent duplicates from GT_MARA based on MATNR.
    1.7 Loop through GT_ZFIBUE where PRDHA = blank.
              Read Table GT_MARA based on MATNR = GT_ZFIBUE-MATNR.
              IF sy-subrc = 0.
                     Move GT_MARA-PRDHA to GT_ZFIBUE-PRDHA.
                  Modify Table GT_ZFIBUE. “Update Product Hierarchy
        Fetch PRDHA, GSBER from ZFIBU into GT_ZFIBU for all entries in GT_ZFIBUE where PRDHA = GT_ZFIBUE-PRDHA.
        Read Table GT_ZFIBU based on PRDHA = GT_ZFIBUE-PRDHA.
              IF sy-subrc = 0.
                     Move GT_ZFIBU-GSBER to GT_ZFIBUE-GSBER.
                  Move “X” to GT_ZFIBUE-MAPPED.      
                  Modify Table GT_ZFIBUE.
    1.8 Modify database table ZFIBUE from GT_ZFIBUE.
    1.9 Fill the field catalog table GT_FIELDCAT using the details of output fields listed in section “Inputs/Outputs” (above).
       Eg:                 LWA_ FIELDCAT -SELTEXT_L = 'Serial Number’.
                              LWA_ FIELDCAT -DATATYPE = ‘NUMC’.
                              LWA_ FIELDCAT -OUTPUTLEN = 9.
                              LWA_ FIELDCAT -TABNAME = 'GT_ZFIBUE'.
                              LWA_ FIELDCAT-FIELDNAME = 'SERIALNO'.
              Append LWA_FIELDCAT to GT_FIELDCAT
    Note: a) The output field GT_ZFIBUE-PROCESSED will be editable marking INPUT = “X” in field catalog (GT_FIELDCAT).
             b) The standard ALV functionality will be used to give the user option for selecting all or blocks of entries at a time.
             c) The PF-STATUS STANDARD_FULLSCREEN from function group SLVC_FULLSCREEN will be copied to the program and modified to include a “SAVE” button.
    1.10 Call the function module REUSE_ALV_GRID_DISPLAY passing output table GT_ZFIBUE and field catalog GT_FIELDCAT. Additional parameters like I_CALLBACK_PF_STATUS_SET (= ‘ZFIBUESTAT’) and I_CALLBACK_USER_COMMAND (=’HANDLE_USER_ACTION’) will also be passed to handle user events. Go to 2.14.
    1.11 Download the file to P_FILEPATH using function module GUI_DOWNLOAD passing GT_ZFIBUE.
    1.12 Exit Program.
    Logic to be implemented in  routine “Handle_User_Action”
    This routine will have the following interface:
    FORM Handle_User_Action  USING r_ucomm LIKE sy-ucomm
                                                               rs_selfield TYPE slis_selfield.
    Following logic will be implemented in this routine:
    1.     If r_ucomm = ‘SAVE’, continue. Else exit.
    2.     Loop through GT_ZFIBUE where SEL_ROW = ‘X’. “Row is selected
    a.     IF GT_ZFIBUE-PROCESSED = ‘X’.
    iii.     MODIFY ZFIBUE FROM work area GT_ZFIBUE.

    Hi Swathi,
    If it's very very urgent then you better get on with it, don't waste time on the web. Chop chop.

  • Experts plz help its very urgent

    hi expert
    plz help- me
    previously i was getting dump in this statement
    TRANSFER v_tab TO p_file.
    here v_tab is a table which hav som records
    and p_file contains the path of a file like c:\new\ggg.txt
    TYPES: BEGIN OF t_line,
           pspid(9) TYPE c,
           tab1 TYPE x,
           post1 TYPE proj-post1,
           tab2 TYPE x,
           vernr TYPE prps-vernr,
           tab3 TYPE x,
    END OF t_line.
    For the statement
       "TRANSFER f TO ..."
    only character-type data objects are supported at the argument position
    In this case. the operand "f" has the non-character-type "T_LINE". The
    current program is a Unicode program. In the Unicode context, the type
    'X' or structures containing not only character-type components are
    regarded as non-character-type.
    to avoid this dump i used feild symbol
    assign V_TAB to <IN> casting.
          p_file = <in>.
          unassign <IN>.
    nw there is no dump
    but problem is p_file contains the contents of v_tab not the file path .
    plz help me its very urgent
    thanx in advance

    Hey, no probs,
    after your initial declaration, do this.
    TYPES: BEGIN OF n_line,
    pspid(9) TYPE c,
    tab1(15) TYPE c,        "check the length you want
    post1 TYPE proj-post1,
    tab2(15) TYPE c,         "check the length you want
    vernr TYPE prps-vernr,
    tab3(15) TYPE c,         "check the length you want
    END OF t_line.
    now after you fetch data into v_tab,
    move it to n_tab.
    using a loop at v_tab and move corresponding fields to n_tab's work area
    append to n_tab.
    once you have populated n_tab and are ready to TRANSFER.
    OPEN your file using
    open dataset <file> for output in text mode encoding default.
    loop at n_tab.
    TRANSFER n_tab to p_file.

  • Error while opening a module. plz help me, very urgent.

    when i try to open a module, the following error message appears on my screen.
              " no j2ee component found in d:\krisp\programs\servlets".
              i've installed bea in c: drive and my servlet program is in d: drive.
              plz help me, it's very urgent.

    Can you provide some more information? What were you doing when this happened?
              Can you post the entire error message?
              -- Rob
              WLS Blog

  • Plz help me[need abap oo]

    hi frnds,
    i lose abap oo [siemens]materials. so now don't hav any oo material. if any hav abap objects materials [pdf format] pls send the link.... i need it immediately... i need ur help ... plz help me....

    Hi this may be of some help.
    OOPs ABAP uses Classes and Interfaces which uses Methods and events.
    If you have Java skills it is advantage for you.
    There are Local classes as well as Global Classes.
    Local classes we can work in SE38 straight away.
    But mostly it is better to use the Global classes.
    Global Classes or Interfaces are to be created in SE24.
    SAP already given some predefined classes and Interfaces.
    This OOPS concepts very useful for writing BADI's also.
    So first create a class in SE 24.
    Define attributes, Methods for that class.
    Define parameters for that Method.
    You can define event handlers also to handle the messages.
    After creation in each method write the code.
    Methods are similar to ABAP PERFORM -FORM statements.
    After the creation of CLass and methods come to SE38 and create the program.
    In the program create a object type ref to that class and with the help of that Object call the methods of that Class and display the data.
    REPORT sapmz_hf_alv_grid .
    Type pool for icons - used in the toolbar
    TYPE-POOLS: icon.
    TABLES: zsflight.
    To allow the declaration of o_event_receiver before the
    lcl_event_receiver class is defined, decale it as deferred in the
    start of the program
    CLASS lcl_event_receiver DEFINITION DEFERRED.
    G L O B A L I N T E R N A L T A B L E S
    *DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
    To include a traffic light and/or color a line the structure of the
    table must include fields for the traffic light and/or the color
    TYPES: BEGIN OF st_sflight.
    Field for traffic light
    TYPES: traffic_light TYPE c.
    Field for line color
    types: line_color(4) type c.
    TYPES: END OF st_sflight.
    TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
    DATA: gi_sflight TYPE tt_sflight.
    G L O B A L D A T A
    DATA: ok_code LIKE sy-ucomm,
    Work area for internal table
    g_wa_sflight TYPE st_sflight,
    ALV control: Layout structure
    gs_layout TYPE lvc_s_layo.
    Declare reference variables to the ALV grid and the container
    go_grid TYPE REF TO cl_gui_alv_grid,
    go_custom_container TYPE REF TO cl_gui_custom_container,
    o_event_receiver TYPE REF TO lcl_event_receiver.
    Work area for screen 200
    g_screen200 LIKE zsflight.
    Data for storing information about selected rows in the grid
    Internal table
    gi_index_rows TYPE lvc_t_row,
    Information about 1 row
    g_selected_row LIKE lvc_s_row.
    C L A S S E S
    CLASS lcl_event_receiver DEFINITION.
    handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
    e_object e_interactive,
    handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
    IMPORTING e_ucomm.
    CLASS lcl_event_receiver IMPLEMENTATION
    CLASS lcl_event_receiver IMPLEMENTATION.
    METHOD handle_toolbar.
    Event handler method for event toolbar.
    Constants for button type
    c_button_normal TYPE i VALUE 0,
    c_menu_and_default_button TYPE i VALUE 1,
    c_menu TYPE i VALUE 2,
    c_separator TYPE i VALUE 3,
    c_radio_button TYPE i VALUE 4,
    c_checkbox TYPE i VALUE 5,
    c_menu_entry TYPE i VALUE 6.
    ls_toolbar TYPE stb_button.
    Append seperator to the normal toolbar
    CLEAR ls_toolbar.
    MOVE c_separator TO ls_toolbar-butn_type..
    APPEND ls_toolbar TO e_object->mt_toolbar.
    Append a new button that to the toolbar. Use E_OBJECT of
    event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
    This class has one attribute MT_TOOLBAR which is of table type
    TTB_BUTTON. The structure is STB_BUTTON
    CLEAR ls_toolbar.
    MOVE 'CHANGE' TO ls_toolbar-function.
    MOVE icon_change TO ls_toolbar-icon.
    MOVE 'Change flight' TO ls_toolbar-quickinfo.
    MOVE 'Change' TO ls_toolbar-text.
    MOVE ' ' TO ls_toolbar-disabled.
    APPEND ls_toolbar TO e_object->mt_toolbar.
    METHOD handle_user_command.
    Handle own functions defined in the toolbar
    CASE e_ucomm.
    PERFORM change_flight.
    S T A R T - O F - S E L E C T I O N.
    SET SCREEN '100'.
    *& Module USER_COMMAND_0100 INPUT
    MODULE user_command_0100 INPUT.
    CASE ok_code.
    WHEN 'EXIT'.
    *& Module STATUS_0100 OUTPUT
    MODULE status_0100 OUTPUT.
    For parameter IS_VARIANT that is sued to set up options for storing
    the grid layout as a variant in method set_table_for_first_display
    l_layout TYPE disvariant,
    Utillity field
    l_lines TYPE i.
    After returning from screen 200 the line that was selected before
    going to screen 200, should be selected again. The table gi_index_rows
    was the output table from the GET_SELECTED_ROWS method in form
    DESCRIBE TABLE gi_index_rows LINES l_lines.
    IF l_lines > 0.
    CALL METHOD go_grid->set_selected_rows
    it_index_rows = gi_index_rows.
    CALL METHOD cl_gui_cfw=>flush.
    REFRESH gi_index_rows.
    Read data and create objects
    IF go_custom_container IS INITIAL.
    Read data from datbase table
    PERFORM get_data.
    Create objects for container and ALV grid
    CREATE OBJECT go_custom_container
    EXPORTING container_name = 'ALV_CONTAINER'.
    CREATE OBJECT go_grid
    i_parent = go_custom_container.
    Create object for event_receiver class
    and set handlers
    CREATE OBJECT o_event_receiver.
    SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
    SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
    Layout (Variant) for ALV grid
    l_layout-report = sy-repid. "Layout fo report
    Setup the grid layout using a variable of structure lvc_s_layo
    Set grid title
    gs_layout-grid_title = 'Flights'.
    Selection mode - Single row without buttons
    (This is the default mode
    gs_layout-sel_mode = 'B'.
    Name of the exception field (Traffic light field) and the color
    field + set the exception and color field of the table
    gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
    gs_layout-info_fname = 'LINE_COLOR'.
    LOOP AT gi_sflight INTO g_wa_sflight.
    IF g_wa_sflight-paymentsum < 100000.
    Value of traffic light field
    g_wa_sflight-traffic_light = '1'.
    Value of color field:
    C = Color, 6=Color 1=Intesified on, 0: Inverse display off
    g_wa_sflight-line_color = 'C610'.
    ELSEIF g_wa_sflight-paymentsum => 100000 AND
    g_wa_sflight-paymentsum < 1000000.
    g_wa_sflight-traffic_light = '2'.
    g_wa_sflight-traffic_light = '3'.
    MODIFY gi_sflight FROM g_wa_sflight.
    Grid setup for first display
    CALL METHOD go_grid->set_table_for_first_display
    EXPORTING i_structure_name = 'SFLIGHT'
    is_variant = l_layout
    i_save = 'A'
    is_layout = gs_layout
    CHANGING it_outtab = gi_sflight.
    *-- End of grid setup -
    Raise event toolbar to show the modified toolbar
    CALL METHOD go_grid->set_toolbar_interactive.
    Set focus to the grid. This is not necessary in this
    example as there is only one control on the screen
    CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
    *& Module USER_COMMAND_0200 INPUT
    MODULE user_command_0200 INPUT.
    CASE ok_code.
    WHEN 'EXIT200'.
    PERFORM save_changes.
    *& Form get_data
    FORM get_data.
    Read data from table SFLIGHT
    SELECT *
    FROM zsflight
    INTO TABLE gi_sflight.
    ENDFORM. " load_data_into_grid
    *& Form change_flight
    Reads the contents of the selected row in the grid, ans transfers
    the data to screen 200, where it can be changed and saved.
    FORM change_flight.
    DATA:l_lines TYPE i.
    REFRESH gi_index_rows.
    CLEAR g_selected_row.
    Read index of selected rows
    CALL METHOD go_grid->get_selected_rows
    et_index_rows = gi_index_rows.
    Check if any row are selected at all. If not
    table gi_index_rows will be empty
    DESCRIBE TABLE gi_index_rows LINES l_lines.
    IF l_lines = 0.
    textline1 = 'You must choose a line'.
    Read indexes of selected rows. In this example only one
    row can be selected as we are using gs_layout-sel_mode = 'B',
    so it is only ncessary to read the first entry in
    table gi_index_rows
    LOOP AT gi_index_rows INTO g_selected_row.
    IF sy-tabix = 1.
    READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
    Transfer data from the selected row to screenm 200 and show
    screen 200
    CLEAR g_screen200.
    MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
    LEAVE TO SCREEN '200'.
    ENDFORM. " change_flight
    *& Form save_changes
    Changes made in screen 200 are written to the datbase table
    zsflight, and to the grid table gi_sflight, and the grid is
    updated with method refresh_table_display to display the changes
    FORM save_changes.
    DATA: l_traffic_light TYPE c.
    Update traffic light field
    Update database table
    MODIFY zsflight FROM g_screen200.
    Update grid table , traffic light field and color field.
    Note that it is necessary to use structure g_wa_sflight
    for the update, as the screen structure does not have a
    traffic light field
    MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
    IF g_wa_sflight-paymentsum < 100000.
    g_wa_sflight-traffic_light = '1'.
    C = Color, 6=Color 1=Intesified on, 0: Inverse display off
    g_wa_sflight-line_color = 'C610'.
    ELSEIF g_wa_sflight-paymentsum => 100000 AND
    g_wa_sflight-paymentsum < 1000000.
    g_wa_sflight-traffic_light = '2'.
    clear g_wa_sflight-line_color.
    g_wa_sflight-traffic_light = '3'.
    clear g_wa_sflight-line_color.
    MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
    Refresh grid
    CALL METHOD go_grid->refresh_table_display.
    CALL METHOD cl_gui_cfw=>flush.
    LEAVE TO SCREEN '100'.
    ENDFORM. " save_changes
    chk this blog
    with regards,
    Hema SUndara.

  • Plz help i need to build a flash gallery with thumbs

    plz help me i need to build a flash gallery with thumbs plz
    give me the code or the fla file ........ !

    You don't give a lot of information about your set-up but there are a couple ways to do this.
    You can run Open Directory on your OS X Server and bind that to your Active Directory forest. This will allow people to authenticate against your OD using their AD credentials. This will work (it's better/easier in 10.5 than 10.4) but will result in Kerberos ticket which you would need to integrate to your site's permissions. You might be able to use Service ACLs to only allow authenticated users to access a certain site or service and that would take care of the authentication and control for you - but would require a certain amount of server manipulation and ODAD interaction. From the tone of your question I'm guessing this is an answer beyond what you were looking for.
    Alternately you should be able to build a website that presents a dialogue and uses LDAP against the AD server. Almost all the examples of this are, of course, using MS specific tools and code like C# and .Net. But even to get this working would certainly programming (using PHP, Java or some other language) to handle the request and answer from the server and this will be beyond anything included in CS4. Depending on your resources maybe you could create the whole website except for the authentication and have someone code that for you. But it would need to be someone not from the MS world because they will probably want to use tools that are Windows specific.
    Lastly there is the web specific .htaccess method that you could use without programming, but as you anticipate it will require you to manage the file that has the name/password information in it and will not talk to AD for information. This is the easy and local way to do it because it cuts AD out of the picture, but that puts the burden of maintenance on you.
    I guess the answer is yes this is possible, but it is not easy or automatic.
    Good luck,

  • Plz Help me.Very urgent

    Hi Frds,
    When i am creating generic data source for master data table KNKK, getting following error : Invalid extract structure template KNKK of data source ZRF_KNKK_CRDMNGT. why I am getting error?
    In the table/view  entered  KNKK. may be this is wrong. So i have to create View compulsory to master data generic data source.
    Plz Help me . Very urgent

    Check your table knkk...does that table have any currency or weight units?
    if it have any of the above units then those units might be referring to some
    Currency and weight unit fields should always refer to fields in its own table.
    In your case,it should refer to some field in KKNK table.
    If your currency or weight field is referring to some other table then while
    creating the datasource you will get the error mentioned by you.

  • Plz Help Me its Urgent

    Hi Gurus
    Please help me related to the following issue....
    How can i get all the standard program names in SAP related to some perticular functional area(eg. FI or FM)? Is there any direct method to identify the report programs only? please help me with some example..

    Go to SE11 --> table name --> TRDIR --> Field name APPL , in this field input any one of the characters based on the module.
    A Assets accounting
    D DASS control station
    E RIVA
    F Financial accounting
    G General Ledger
    H Human resources planning
    I Maintenance
    J RK projects
    K Cost accounting
    L Warehouse management
    M Materials management
    N Hospital
    P Human resources
    Q QSS
    S System
    V Sales
    Y Customer head office
    Z Customer branch
    And in the field SUBC input 1 for executable program etc.
    And in the filed RSTAT input P for standard SAP Programs.
    Sriram Ponna.

  • Please help need urgent support

    Can anybody tell me how can I download
                   "CS5 -"

    Hi Amar, you can download CS 5 trials from here :
    Please make sure you read the instructions before you begin downloading.

  • After Effects CS4 crash report (PLZ HELP I NEED IT WORKING DESPERATELY)

    Ok, I'll type the window EXACTLY (There's 2 errors I need to fix): -
    After Effects error: Crash in progress. Last logged message was:,7832.
    <ASL.ResourceUtils.GetLanguageIDFromRegistry> >0< Unable to
    obtain the User 'Language' registry key at: Software\Adobe\After
    Effects\9.0.3\ Defaulting to 'en_US'.
    After Effects can't continue: sorry, After Effects has crashed. See for known
    issues. If you still can't resolve the issue, please contact Adobe
    Technical Support (2)
    I'm using CS4 ONLY because I have a 32 bit Windows 8.1 computer which has Nvidia GFX card and an i5 processor.
    It has 4GB of RAM and that's all you need to know. Please help me guys. <3

    What I meant was that it was running at all was a lucky happenstance.
    xX360noscopfazeopticXx wrote:
    Could Adobe actually see my personal data of my computer and just put an error message there to prevent me from using After Effects just because they realized that I have a Windows 8.1 32 bit computer?
    No. There is no way they could do that. Especially not in CS4.
    There are a lot of people in the same situation as you who pop on the forums with some frequency. Well, not usually trying to run such an old version - it's usually CS5 or CS5.5, but the issues are similar: odd error messages. Trying to run old versions of software on new, unsupported operating systems can be a fun exercise (like getting Linux installed on a potato). However, even if it does work for a while, the least little thing can cause it to foul up. Maybe Windows updated, maybe a background service that wasn't running before is running now, maybe something subtle changed in your registry or your display settings or any of a thousand different things. The bottom line is that something changed between when it was working and now.
    The error message seems to indicate some sort of issue in your registry. That is a tricky area to mess around in. Have you installed ANYTHING on your computer between when it was working and now? Added any browser extensions? Installed any codec packs? Downloaded any apps? Updated any software?
    By the way, it's not very expensive to bump up to a 64-bit version of your OS if you did want to use a modern version of After Effects. I mean, if you want to continue working with After Effects, it would be a lot easier to use an older OS or a newer AE than to keep trying to kludge it like we are.

  • I am getting error!!!..Plz help! its urgent!!!

    Hi Experts,
    I am getting following error.
    The initial exception that caused the request to fail, was: DataNodeInfo(LoginView): unknown child node Frage
    Please help me with this.

    Hi Darshana,
    In the case of characteristics with attributes from the attribute names, the application generates corresponding context nodes in the Web screen application. No special characters are allowed here. In the case of attribute names with special characters, the error message is issued when you call the F4 input help.
    The error is corrected in SAP Netweaver 2004s BI Support Package 8 Java. For Support Package 7 Java, you must import Support Package 7 Java Patch 1.
    Check this links.
    <a href="">Why to use the Common Model Interface (CMI)?</a>
    Sap Note
    <a href="">939327</a>
    <a href="">1008355</a>

  • WAP/Servlet help is needed URGENT!!!

    I've wrote this little wap-application, which update the library loans via mobile phones. I don't know why my login doesn't work properly (it gives error-messages in any cases). I believe I did everything right.
    Can anyone PLEASE help me finding my mistakes!? I give all my dukes for working version of mine application.
    This are my codes:
    import javax.servlet.*;
    import javax.servlet.http.*;
    import java.sql.*;
    import java.util.*;
    public class Uusinta extends HttpServlet {
    Connection conn;
    String TUNNUS = "2000000112222";
    String user = null;
    boolean yhteys = false;
    static String [] otsikko = {
    "<?xml version=\"1.0\" encoding=\"utf-8\"?>",
    "<!DOCTYPE wml PUBLIC \"-//WAPFORUM//DTD WML 1.3//EN\" \"\"> " ,
    "<wml>" ,
    "<!-- Possible <head> elements here. --> " ,
    "<template>" ,
    "<do type=\"accept\" label=\"Ok\" name=\"back\" >" ,
    "<prev/>" ,
    "</do>" ,
    "</template>" ,
    "<card id=\"welcome\" title=\"WAP-kirjasto\" newcontext=\"true\">" ,
    "<do type=\"accept\" name=\"back\"><noop/>" ,
    "</do>" ,
    "<p align=\"center\"><strong>TERVETULOA</strong></p>",
    "<p><br/>Kirjastokortin numero:<br/>" ,
    "<input type=\"text\" name=\"numero\" size=\"11\" format=\"*N\" maxlength=\"13\"/><br/>" ,
    "Salasana:<br/>" ,
    "<input type=\"text\" name=\"salasana\" size=\"4\" format=\"*N\" maxlength=\"4\"/><br/>" ,
    "<a href=\"skripti.wmls#Login('$(numero)','$(salasana)','kayttaja')\">Sisaan </a></p>" ,
    "</card>" ,
    "<card id=\"loginError\">" ,
    "<do type=\"prev\" label=\"Back\">" ,
    "<go href=\"#welcome\"/>" ,
    "</do>" ,
    "<p align=\"center\"><br/>Korttinumero tai salasana on vaara.</p>" ,
    "</card>" ,
    "<card id=\"lainat\" newcontext=\"true\">" ,
    "<do type=\"accept\" name=\"back\"><noop/>" ,
    "</do>" ,
    "<do type=\"options\" label=\"Lopeta\">" ,
    "<go href=\"#goodbye\"/>" ,
    "</do>" ,
    "<p><b>Lainatut kirjat:</b></p><p> " ,
    "<select name=\"item\" title=\"Lista\">"};
    static String [] r2 = {
    "</select>" ,
    "<br/><a href=\"skripti.wmls#uusiNide('$(item)','valittu')\">Uusi valittu</a><br/>" ,
    "<a href=\"skripti.wmls#uusiKaikki()\">Uusi kaikki</a></p>" ,
    "</card>" ,
    "<card id=\"virhe\">" ,
    "<p>Kirjan uusiminen ei onnistunut. Yrit&#xE4; uudelleen.</p>" ,
    "</card>" ,
    "<card id=\"uusittu\">" ,
    "<do type=\"prev\" label=\"Back\">",
    " <go href=\"#lainat\"/>",
    "<p align=\"center\"><br/>Kirja on uusittu.</p>" ,
    "</card>" ,
    "<card id=\"virheet\">" ,
    "<p>Kirjojen uusiminen ei onnistunut. Yrit&#xE4; uudelleen.</p>" ,
    "</card>" ,
    "<card id=\"uusitut\">" ,
    "<do type=\"prev\" label=\"Back\">",
    " <go href=\"#goodbye\"/>",
    "<p align=\"center\"><br/>Kirjat on uusittu.</p>" ,
    "</card>" ,
    "<card id=\"goodbye\" newcontext=\"true\">" ,
    "<do type=\"accept\" name=\"back\"><noop/>" ,
    "</do>" ,
    "<p align=\"center\"><br/>Kiitos k�ynnist�. Ja tervetuloa uudelleen.</p>" ,
    "</card>" ,
    private void teeWML(PrintWriter out)
    Statement stmt;
    ResultSet result;
    boolean ok = false;
    for (int i = 0; i <otsikko.length;i++)
    try {
    stmt= conn.createStatement();
    result = stmt.executeQuery("Select * FROM lainat l join kirja k on l.nide = k.nide where tunnus = '"+this.user+"'");
    int cnt = 1;
              ok = true;
                   String nimi ="";
         if(result.getString("nimi").length() > 8)
         nimi = result.getString("nimi").substring(0,8) + "...";
         nimi = result.getString("nimi");
              out.println("<option value=\""+result.getString("l.nide")+"\">"+nimi+":"
    }catch (SQLException ex) {
    System.out.println ("\nSQLException:");
    while (ex != null) {
    System.out.println ("SQLState: "+ ex.getSQLState());
    System.out.println ("Message: "+ ex.getMessage());
    System.out.println ("Vendor: "+ ex.getErrorCode());
    ex = ex.getNextException();
              out.println("<option value=\"0\">nothing</option>");
         for (int i = 0; i <r2.length;i++)
    private void uusiNide(PrintWriter out, String nide)
    Statement stmt;
    ResultSet result;
    boolean ok=false;
         try {
    stmt= conn.createStatement();
    result = stmt.executeQuery("Select nide from lainat where tunnus='"+user+"' ");
    int cnt = 1;
              ok = true;
              String pvm = getPvm();
              stmt = conn.createStatement();
              int a = stmt.executeUpdate("update lainat set erapaiva='"+pvm+"' where tunnus='"+user+"' AND nide='"+nide+"'");
    }catch (SQLException ex) {
    System.out.println ("\nSQLException:");
    while (ex != null) {
    System.out.println ("SQLState: "+ ex.getSQLState());
    System.out.println ("Message: "+ ex.getMessage());
    System.out.println ("Vendor: "+ ex.getErrorCode());
    ex = ex.getNextException();
         if(ok) {
         out.println("<!doctype html public \"-//w3c//dtd html 4.0 transitional//en\" \"\">");
              out.println("<html><head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=iso-8859-1\"><title>koe</title></head><body><p>OKnide</p></body></html>");
    private void uusiKaikkiNiteet(PrintWriter out)
    Statement stmt;
    ResultSet result;
    boolean ok=false;
    //t�h�n tulee viel� korttinumero
         try {
              String pvm = getPvm();
         stmt = conn.createStatement();
              int a = stmt.executeUpdate("update lainat set erapaiva='"+pvm+"' where tunnus='"+user+"'");
    }catch (SQLException ex) {
    System.out.println ("\nSQLException:");
    while (ex != null) {
    System.out.println ("SQLState: "+ ex.getSQLState());
    System.out.println ("Message: "+ ex.getMessage());
    System.out.println ("Vendor: "+ ex.getErrorCode());
    ex = ex.getNextException();
    if(ok) {
              out.println("<!doctype html public \"-//w3c//dtd html 4.0 transitional//en\" \"\">");
              out.println("<html><head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=iso-8859-1\"><title>koe</title></head><body><p>OKKaikki</p></body></html>");
    private void tarkKayttaja(PrintWriter out, String kayttaja, String password)
    Statement stmt;
    ResultSet result;
    boolean ok=false;
    String nimi = null;
    if(user !=null && password !=null)
    int salasana = Integer.parseInt(password);
    try {
    stmt= conn.createStatement();
    result = stmt.executeQuery("Select * from kortti where numero='"+kayttaja+"' and salasana="+salasana);
              ok = true;
              nimi = result.getString("nimi");
    }catch (SQLException ex) {
         System.out.println ("\nSQLException:");
         while (ex != null) {
         System.out.println ("SQLState: "+ ex.getSQLState());
         System.out.println ("Message: "+ ex.getMessage());
         System.out.println ("Vendor: "+ ex.getErrorCode());
         ex = ex.getNextException();
         if(ok) {
                   this.user= kayttaja;
                   yhteys = true;
         out.println("<!doctype html public \"-//w3c//dtd html 4.0 transitional//en\" \"\">");
              out.println("<html><head><meta http-equiv=\"Content-Type\" content=\"text/html; charset=iso-8859-1\"><title>koe</title></head><body><p>OK</p></body></html>");
    public void init(ServletConfig cfg) throws ServletException
    Driver d = (Driver)Class.forName("com.mysql.jdbc.Driver").newInstance();
    String sCon = "jdbc:mysql://localhost/kirjasto?user=oppilas&password=oppix";
    conn = DriverManager.getConnection(sCon);
    }catch(Exception e){
    System.out.println ("Exception: "+ e.getMessage());
    throw new ServletException(e.getMessage());
    public void doGet(HttpServletRequest req, HttpServletResponse res)
    throws IOException, ServletException
    PrintWriter out = null;
         String kutsu = req.getParameter("toiminto");
         String uusinta = req.getParameter("uusinta");
         String password = req.getParameter("password");
         String kayttaja = req.getParameter("user");
         if (kutsu == null) {
         out = res.getWriter();
              tarkKayttaja(out, null, null);
         if(kutsu.equalsIgnoreCase("login")) {
         out = res.getWriter();
              tarkKayttaja(out, kayttaja, password);
         if(kutsu.equalsIgnoreCase("uusi")) {
         out = res.getWriter();
              uusiNide(out, uusinta);
              out = res.getWriter();
    public void destroy()
    }catch(SQLException e){
    System.out.println ("\nSQLException:");
    System.out.println ("SQLState: "+e.getSQLState());
    System.out.println ("Message: "+ e.getMessage());
    System.out.println ("Vendor: "+ e.getErrorCode());
    public String getPvm()
         Calendar x = Calendar.getInstance();
         x.add(Calendar.DATE, 30);
              int Day = x.get(Calendar.DAY_OF_YEAR);
              Day = Day+30;
              x.set(Calendar.DAY_OF_YEAR, Day);
              int monthDue = x.get(Calendar.MONTH);
              int dayOfMonthDue = x.get(Calendar.DAY_OF_MONTH);
              int yearDue = x.get(Calendar.YEAR);
              return (yearDue+"-"+monthDue+"-"+dayOfMonthDue);
    extern function uusiNide(prmIn,valittu) {
         var str, result, okInd, pInd;
         str = "http://localhost:8080/kirjasto/loans?toiminto=uusi&uusinta=" +URL.escapeString(prmIn);
         var load = URL.loadString(str,"text/html");
         okInd =String.find(load, "OKnide");
         if( okInd != -1 ) {
              result = WMLBrowser.setVar(valittu, prmIn);
         else {
         return "";
    extern function uusiKaikki() {
         var str, result, okInd, pInd, val, valittu;
         str = "http://localhost:8080/kirjasto/loans?toiminto=uusiKaikki&uusinta=";
         var load = URL.loadString(str,"text/html");
         okInd =String.find(load, "OKKaikki");
         if( okInd != -1 ) {
         else {
         return "";
    extern function Login(prmNum, prmPass, kayttaja) {
         var str, result, okInd, pInd, pos, nimi;
         str = "http://localhost:8080/kirjasto/loans?toiminto=login&user="+URL.escapeString(prmNum)+"&password="+URL.escapeString(prmPass);
         var load = URL.loadString(str,"text/html");
         okInd =String.find(load, "OK");
         if( okInd != -1 ) {     
              pos = String.find(load, "</p");
              nimi = String.subString(load,(okInd + 7), (pos - okInd -7));
              result = WMLBrowser.setVar(kayttaja, nimi);
         else {
         return "";
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE web-app PUBLIC '-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN'
    DB create and inserts
    create table kortti(
    numero char(13) not null,
    nimi char(25),
    osoite char(25),
    postinro int(5),
    puhelin char(15),
    salasana int(4),
    primary key(numero)
    create table kirja(
    nide char(10) not null,
    nimi char(25) not null,
    tekija char(25) not null,
    vuosi int(4) not null,
    primary key(nide)
    create table lainat(
    tunnus char(13) not null,
    nide char(10) not null,
    erapaiva date not null,
    primary key (tunnus, nide),
    foreign key (tunnus) references kortti,
    foreign key (nide) references kirja );
    insert into kortti
    (numero, nimi, osoite, postinro, puhelin, salasana)
    ('2000000112222', 'Aku Ankka', 'Akunkatu 11', 00980, '0401231234', 2222);
    insert into kortti
    (numero, nimi, osoite, postinro, puhelin, salasana)
    ('2000000113333', 'Roope Set�', 'Mikonkatu 11', 00100, '0405552223', 3333);
    insert into kortti
    (numero, nimi, osoite, postinro, puhelin, salasana)
    ('2000000114444', 'Mikki Hiiri', 'Kissankuja 5', 00930, '04009876545', 4444);
    insert into kortti
    (numero, nimi, osoite, postinro, puhelin, salasana)
    ('2000000115555', 'Ville Vallaton', 'Mestarinrinne 4', 00310, '0952223335', 5555);
    insert into kirja
    (nide, nimi, tekija, vuosi)
    ('1111-85555','Wap', 'Pekka Niskanen', 2000);
    insert into kirja
    (nide, nimi, tekija, vuosi)
    ('1111-45345','Java 2', 'Pekka Niskanen', 2002);
    insert into kirja
    (nide, nimi, tekija, vuosi)
    ('1111-64648','J�rki ja tunteet', 'Jane Austin', 1998);
    insert into kirja
    (nide, nimi, tekija, vuosi)
    ('1111-15671','Rikos ja rangastus', 'Leo Tolstoy', 1998);
    insert into kirja
    (nide, nimi, tekija, vuosi)
    ('1111-85554','Inside Wap', 'Pekka Niskanen', 2002);
    insert into lainat
    (tunnus, nide, erapaiva)
    ('2000000112222', '1111-85555', '2004-5-01-11');
    insert into lainat
    (tunnus, nide, erapaiva)
    ('2000000112222', '1111-45345', '2004-5-01-11');
    insert into lainat
    (tunnus, nide, erapaiva)
    ('2000000112222', '1111-64648', '2004-5-01-12');
    insert into lainat
    (tunnus, nide, erapaiva)
    ('2000000113333', '1111-85554', '2004-5-01-11');
    insert into lainat
    (tunnus, nide, erapaiva)
    ('2000000114444', '1111-15671', '2004-5-01-12');

    So many things wrong with this post... from [url]How to Ask Questions the Smart Way:
    Don't flag your question as ?Urgent?, even if it is for you
    That's your problem, not ours. Claiming urgency is very likely to be counter-productive: most hackers will simply delete such messages as rude and selfish attempts to elicit immediate and special attention.
    There is one semi-exception. It can be worth mentioning if you're using the program in some high-profile place, one that the hackers will get excited about; in such a case, if you're under time pressure, and you say so politely, people may get interested enough to answer faster.
    This is a very risky thing to do, however, because the hackers' metric for what is exciting probably differ from yours. Posting from the International Space Station would qualify, for example, but posting on behalf of a feel-good charitable or political cause would almost certainly not. In fact, posting ?Urgent: Help me save the fuzzy baby seals!? will reliably get you shunned or flamed even by hackers who think fuzzy baby seals are important.
    If you find this mysterious, re-read the rest of this how-to repeatedly until you understand it before posting anything at all.
    Be precise and informative about your problem
    Describe the symptoms of your problem or bug carefully and clearly.
    Describe the environment in which it occurs (machine, OS, application, whatever). Provide your vendor's distribution and release level (e.g.: ?Fedora Core 1?, ?Slackware 9.1?, etc.).
    Describe the research you did to try and understand the problem before you asked the question.
    Describe the diagnostic steps you took to try and pin down the problem yourself before you asked the question.
    Describe any recent changes in your computer or software configuration that might be relevant.
    Do the best you can to anticipate the questions a hacker will ask, and to answer them in advance in your request for help.
    Simon Tatham has written an excellent essay entitled How to Report Bugs Effectively. I strongly recommend that you read it.
    Volume is not precision
    You need to be precise and informative. This end is not served by simply dumping huge volumes of code or data into a help request. If you have a large, complicated test case that is breaking a program, try to trim it and make it as small as possible.
    This is useful for at least three reasons. One: being seen to invest effort in simplifying the question makes it more likely that you'll get an answer, Two: simplifying the question makes it more likely you'll get a useful answer. Three: In the process of refining your bug report, you may develop a fix or workaround yourself
    And from [url]The J Word:
    Code Tags
    When you post code, please use [code] and [/code] tags as described in Formatting Help on the message entry page. It makes it much easier to read.

Maybe you are looking for

  • Is there a way to select every other page in a multi page pdf and convert it to grayscale?

    I'm going to ask this question in a few sub-forums, so if you think you've seen it, you might have. Where I work I use a program that can print to pdf. We use it to produce mailings, usually postcards, that are addressed. I often end up with a 500 pa

  • Can't View JPEGs in Windows Explore Because of QuickTime Picture Viewer

    A couple of weeks ago I had some film developed in our local drug store. I had the photos put on a CD. The CD came with its own software and you had to install the software in order to view or take off the photos. I wanted to use my own editing softw

  • Issue with saving an excel file

    I'm using office, specifically excel, on my iMac.  In this particular spreadsheet, I've built a number of logic formulas that require nesting, i.e.:  =IF(AND(A2="novice",A3=2),25,IF(AND(A2="novice",A3=3),30    etc... (approximately 10 nested items) I

  • Invalid DBMS_SQLTUNE

    Guys, I need your help, I cannot run the sql tuning advisor in Oracle 10g since the package DBMS_SQLTUNE is invalid. I tried to recompile but found errors. SQL> alter PACKAGE DBMS_SQLTUNE compile; Warning: Package altered with compilation errors. SQL

  • Starting J2EE(ABAP+Java Add In)

    Hi We've got BW 3.5 on Sap NetWeaver 2004 ABAP + Java (Java Add-In). We've got the problem with starting it. Our system is on 1 server x64. We've got Windows 2003 Server. DataBase Oracle. So in MMC everything is OK. We've got ABAP + Java instance (pr