PO output Validation at Item level

Hi All,
We have created VOFM routine for PO output. We have to validate at item level.But the structure KOMPBEA in the routine is empty and it is not executing KOMPBEA_FILL function module.
Is it possible to Validate PO output at Item level ?
if possible then how to fill KOMPBEA.
Thanks in advance.
Quadri.

I think you are working with RR scenario;
then SNC (RO) triger SD to create SO in ERP (not created in SNC).
PO number is not item level, it is header level, that means all the items of a PO have same PO number.
PO is created at customer system, so are you sending the PO numbers from SNC to your customer?

Similar Messages

  • I am required to trigger billing output to at item level (normally SAP

    I am required to trigger billing output at item level  which means one billing document sends more than one billing output for each line item (normally SAP does it at header level ).How do I go about this? Is there any user exit I can manipulate to trigger RSNAST00---->I found an exit in RVCOMFZZ- USEREXIT_KOMKBV3_FILL ..this subroutine is called before printing>...
    I have not much clue how to go about this ?
    Any Help on this would be highly appreciated.
    Thanks
    Shankar.

    Hi Shankar,
    how about an own output program? That can be triggered on header level, but can create outputs on item level.
    Otherwise: looks difficult to get line level trigger, if SAP hasn't it up to now.
    Regards,
    Christian

  • Prevent Duplicate Output Trigger from Item Level

    Hi,
    We have a requirement of whenever a pricing error happen to send the whole Order information from ECC to an external system through Idocs / Output Trigger.
    The Output for pricing error can be configured by default at the item level. Hence if an ORder has multiple lines that have pricing issues we can get the same Order information sent twice bacuse of output getting triggered more than once.
    Any way I can prevent the duplicate output trigger when multiple items for the same order has issues.
    Regards,
    Arunava

    Hi Arunava,
    You can create a Output Routine using VOFM tcode and attach the routine to your Output type in NACE tcode.
    Inside the routine you can keep check based on the line items / order information.
    Thanks & Regards,
    Ramya.

  • How to generate output in PO item level?

    Hi All,
             There's special requirement from users.  They wan't to generate output for each item of purchase order. But the messages are only defined in PO header. Are there any solutions for these requirement? Moveover is there any way to generate IDOC for each of PO item? The systerm version is 46C.
    Thanks

    Go to PO change mode,Select the line item and besides deletion indicator there are teo indicators one to lock PO line item and another to unlock PO line item, select the unlock one.
    Save po
    Regards
    PK

  • PO idocs at line item level

    Hi All,
      I have a requirement to send all line items of PO as seperate idocs when it is created or changed. I am creating a output message to trigger, Purchase Order does not have output messages at item level. Is there a way i can send all items as inidividual items, by writing a routine in Output determination. Please let me know if there is an another way to do that.
    Any help would be appreciated.
    Thanks,
    Kumar

    Hi Guys,
    Could you please update on this query ? Is there any way other than filling/Creating the IDOC in BADI?
    I would like to create one IDOC per PO line item on change.
    Appreciating your views.
    Regards,
    Guru

  • Item Level & Page Level Validation..

    Hi ,
    What is the difference between Item Level validation & Page Level validation..
    in which sceneario it will be useful.
    Anoo..
    Edited by: Anoo on Dec 16, 2008 5:04 AM

    Hi,
    From the APEX help:
    * Item level validations are specific to a single item.
    * Page level validations do not apply to any single item, but apply to an entire page.
    {code}
    Paulo Vale
    [http://apex-notes.blogspot.com]                                                                                                                                                                                                                                                                                                                                                                                                                                                                                                       

  • FI Validation rule error message problem at line item level

    Hello all.
    I have created a step within an FI Validation rule (OB28) at the document line item level.  I have set the  message to "E" for an error.  I have generated the validations.  When I test my step, the error is triggered, but triggered as an Information popup - warning and does not give me a hard stop.   Does anyone have an idea why this may happen?   I need this to be a hard stop but not a cancellation of the document entry.  I am using FV60 to enter my document.
    Thanks for help.
    mvp0821

    OSS note # 863267 explains answer.  Cannot create "error" message on ENJOY transactions - FV60 is included in this list.  "E" works on classic transactions.  
    Thanks for thinking about this.

  • Validation on 'MATERIAL GROUP' at item level as well as service sub line it

    Hi friends,
    my requirement is to put validation on 'MATERIAL GROUP' at item level as well as service sub line item level.
    Pls  help me with exit/badi.
    Ganesh Shete

    Hi Ganesh,
    For main line item you can use EXIT EXIT_SAPMM06E_017 or BADI ME_PROCESS_PO_CUST.For doing validation at service sub-line item level use EXIT EXIT_SAPLMLSP_030.
    Hope this helps.

  • Item Level Details in Output Requirements Control during Inbound Delivery

    Hello Experts,
    I have a requirement to access item level details of an inbound delivery at the time of processing the output requirement. The output requirement is defined for application E1 and has a related communication structure KOMKBE1. However, this structure does not have item details (Material, Plant, Batch is what is needed) . Is there another global communication structure that stores this data when the output requirement is called? If not, is there any other way to access that data during runtime?
    It is not possible to fetch it from the database tables because the delivery creation process is not yet complete and thus it is not stored in the database, as the output requirement is called when the SAVE button is clicked in VL31N.
    Thanks,
    - Neeraj
    EDIT: Found a solution: Using field symbols, I picked up the value of the needed details from the structures available in the calling program SAPMV50A. In this case, I did not use KOMKBE1 at all.
    Edited by: NeerajAngal on Oct 6, 2010 12:28 PM

    Hi
    As per my understanding you can try se63 option ..

  • Output @ Item level

    Hi,
        Output in delivery at header level will be stored in NAST table.
    To check in Spool we can use SP01.
    To reprint the deliveries at item level we use VL71.
    In which table delivery output at item level will be stored?
    How can v find out?
    early responses will be awarded,
    Thank you  all for ;your support so far and I hope this will continue in all our Journey in this mode of transport i.e. ( SAP)

    Hi RMD,
    NO data will be stored in the table if you are maintaining the Output but it will be get
    updated in the Header table LIKP( Delivery Header ) or LIPS ( Delivery Item).
    And for your information Tabel NAST - Message Status.
    here you find the Spool Numbers etc.,
    Please this is clear and Please Reward If Really Helpful,
    Thanks and Regards,
    Sateesh.Kandula

  • Item level output

    Hi,
    I have created an item level output for Quotations. My requirement is that this output should print only the items that I have selected in the quotation.
    eg: If my quotation has 10 line items and I have trigerred item level output for 5 line items, then the print output should show only those 5 line items in one print preview.
    Regards!!!
    Anuja

    Hi Anuja,
    We have similar requirement to print items selected by user. Please share how you resolved this issue (print preview and hard copy).
    Thanks,
    Regards,
    Srini

  • Adding item level validation to a field

    Hi All,
    I am new to Oracle APEX.
    I have a field named semester_code in my page and I want end user to enter only alphanumeric values. I want to create item level validation using regular expressions, but I don't know what expression to write for this purpose.
    Any help will be highly appreciated.
    Thanks
    Bilal

    Hi,
    Go to the validations section of the application builder (for the application you are working on)
    -> add item level validation
    -> select the field that you are trying to validate
    ->item string comparison
    -> select 'Item specified is alphanumeric' from list
    Chris

  • Item Level Validations on Submit

    Hello guys,
    I would like to use Item level Validations but I have a problem. When I submit the page from a button the Item Level Validations automatically fire, can I not run the item validaitons when a specific button is pressed and not 'on submit'? If so how...
    Thanks in advance
    Spam

    Hi "user502286",
    in APEX 4.0 you have more control if validations (also the built-in one for required) should automatically fire during submit or not than in previous APEX versions. It's all about the two new settings
    -) "Execute Validations" which is available in the "Action When Button Clicked" section of a button and
    -) "Always Execute" for validations
    Please consult the field level help for this attribute to find out how they should be set.
    Hope that helps
    Patrick
    My Blog: http://www.inside-oracle-apex.com
    APEX 4.0 Plug-Ins: http://apex.oracle.com/plugins
    Twitter: http://www.twitter.com/patrickwolf

  • Smartform- Item Level Output to be displayed for sales Order

    Dear All ,
    I have a requirement to display output on smartform on item level Baisi i.e GO to Va02 , select Item > Go to Extras ->Output> Item --> Print Priiew .
    My Problem is that I am using copy of standard driver RVADOR01 program . In this all item vales are passed to smartform .
    I need to display information for single item selected .
    In this program there is no structure that will show which item is selected
    Kindly help . I will be highly tahnkfull

    Hi,,
    just check the interface structure values any fields are marked or not . check any notification are there for particular line item in the structure.
    Regards,
    karthikeyan k s.

  • PO item level validation if create with ref to contract

    Hi
    Pl help me to fulfill the following client requirement:
    When user create the PO with ref to contract , system fetch the all data from the contract to PO at line item level, but in the PO, user is able to change the contract line item rate.
    Now contract line item rate is already fixed with vendor & PO creator should not allowed change this rate.
    Could you provide the any standard configuaration or development to restric the user to chage the PO line item rate if created with ref to contract
    Pl give me replay as soon as possible as it is very urgent
    Rgds
    Nishit

    Hi,
    First you have to create a separate document type which is to be used for creation of PO referring a contract . Than define functional authorisation to buyers going by the menupath -Materials management > Purchasing > Authorisation management > Define function authorisations for buyers-Function Authorizations: Purchase Order. Here enter the field selection key of the new PO document type you created . Than check the box "Display Prices" . Uncheck all other boxes .You can check reference to Contract against possible reference Objects. Than save . Than in the User id enter the User parameter EFB and allocate the aparameter to the user . Also remove other document types of POs except the newly created document type in user authorisations. This will prevent change of price field in the specific document type.
    Dhruba

Maybe you are looking for

  • Character Styles in CSS Properties Panel are not correct

    I am using Adobe Illustator CC. I am trying to export all of the charter styles as CSS. However the CSS panel is not generating the correct style. Right now, in the Character Styles Panel and CSS Properties Panel I have 3 styles (Default, h1, h2) Thi

  • Tab Key in Word not indenting lists!?

    So, all of a sudden when I create a list in Word the Tab key and the Shift + Tab key combo no longer indent/dedent items in a list. I've tried: - Both of the "Full Keyboard Access" modes in Keyboard and Mouse. Not like this should effect what goes on

  • SAP Best Practises - Installation

    Hello All, I had installed SAP best Practises base line package SAP BP-ERP 617V6 in my system a couple of weeks back. But now when I am trying to activate the Best practises it is asking for the solution scope files and the installation text files. B

  • Svrmgrl problem. illegal redo buffer size

    Hello experts, I installed oracle 8.1.5 in Linux 6.1 successfully. And I rebooted the computer and got into the svrmgrl to start the db. I can connect using "connect internal" But I cannot start the db using "startup;" I get this error message, ORA-0

  • IPhone becoming unresponsive at times

    My iPhone 3G 8gb is now freezing more frequently, for the past 2 days it froze 5 times. The buttons become unresponsive and so does the touchscreen, the only way i can turn it off is by pressing the homebutton and lockbutton for 10 seconds. I did upg