Prevent Duplicate Output Trigger from Item Level

Hi,
We have a requirement of whenever a pricing error happen to send the whole Order information from ECC to an external system through Idocs / Output Trigger.
The Output for pricing error can be configured by default at the item level. Hence if an ORder has multiple lines that have pricing issues we can get the same Order information sent twice bacuse of output getting triggered more than once.
Any way I can prevent the duplicate output trigger when multiple items for the same order has issues.
Regards,
Arunava

Hi Arunava,
You can create a Output Routine using VOFM tcode and attach the routine to your Output type in NACE tcode.
Inside the routine you can keep check based on the line items / order information.
Thanks & Regards,
Ramya.

Similar Messages

Prevent duplicate outputs within a table?

Hi at all,
we have a table in a subform. At the moment there are several lines with the same material. This is ok.
Is it possible to prevent duplicate output in the form? We want to print out the rest of this line but set the material to blank.
I tried this with scripting with java script:
If (data.TF.DATA.field.rawValue == data.TF.DATA[-1].field.rawValue)
data.TF.DATA.field.rawValue = "";
Is it possible to point on the previous line with
DATA[-1]
This works for the conditional break so I hope this will works too.
I don`t want to use group levels...
Thanks.
Timo

Thanks for your answer.
It works.
data.formular.DATA.field::ready:layout - (FormCalc, client)
If ($.rawValue == data.form.DATA[-1].field.rawValue) then
this.presence = "hidden";
endif

Read Combination segments for material account from item level

Dear Value Consultant,
Read Combination segments for material account from item level
"For any inventory transactions"
Is there is away to read the material account from item level , to affect the real combination segments not general combinations segments from item master or organization
Business Impacts :
All inventory transaction for all item will affect the same combination segments for material accounts
After I transfer to GL, This not helps me to differentiate the balance for material value is related to any item category
Also for Budget Wise , I want to map the budget on combination level for materials accounts , and this not actualize without affect the real combination for material accounts in subledger ,
Thanks

I have not seen any client asking for this, but you can consider Costing Hooks to create your own accounting engine for inventory transactions. Hope you are taalking about standard costing. In such case, costing hooks are available in Oracle for you to write your own accounting.
Even better in R12, you can do this with setup in SLA.
Thanks
Nagamohan

ASCP Taking Lead time to buy Item from Item Level and not from ASL

Hi All.
We have a buy Item Which is used at multiple Organization now we have defined processing Lead time for this Item at Item Level and ASL level (Global) However for different organization Like ABC and XYZ we have same supplier and Supplier Site for this item,
Below is the details of Item
Item's Processing Lead Time at Item Level
Org - ABC - 35
Org - XYZ - 15
Item's Processing Lead Time at ASL Level
Org - ABC - 10
Org - XYZ - 5
Now when we run ASCP plan for org XYZ and check for exception, Item's Lead time is coming from Item Level (15) not from ASL Level (Does this is expected behavior from Oracle?)
Regards.

Hi Abhishek,
I tested one more time with the same scenario, this time ASCP is considering Processing lead time form ASL only however it is considering processing lead time for another organization (When I am running ASCP plan for Org XYZ ASCP is considering Processing lead time for ABC).
Does it is due to same supplier site for both the organization?
Also it has an active sourcing rule for the same supplier
Regards.

"Account Generator" you can read budget account from item level

Dear Values Consultant.
I am reading from oracle purchasing user guide that if you deal with "Account Generator" you can read budget account from item level
How I can enable this functionality "account generator to gets a budget account from Item Level)
Or it is already defaulted enable in the application
If it is default enable, how to use this functionality, what the setup required to reach to this point
thanks

It is Oracle standard functionality. Account generator can be customised as per need.
Define your Accounting Flexfield structure for each set of books.
Define flexfield segment values and validation rules.
Set up Oracle Workflow.
Choose whether you want to use the default Account Generator
processes
Then do one of the following for each set of books:
Choose to use the default Account Generator processes.
Customize the default Account Generator processes, test your
customizations, and choose the processes for a flexfield
structure, if necessary.

How to prevent duplicate web pages from loading

<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/930219]]</blockquote>
how to prevent duplicate web pages from loading

<s>Hi berternie, can you describe this in more detail?
Are you saying the identical page loads in two different tabs? When does that happen -- when you click a link? or when you use a bookmark?
Or do you have multiple tabs open every time you see your home page (i.e., when you start up, open a new window, or click the home icon)?</s>
I see, you have more info in this thread: https://support.mozilla.org/en-US/questions/930219

I am required to trigger billing output to at item level (normally SAP

I am required to trigger billing output at item level which means one billing document sends more than one billing output for each line item (normally SAP does it at header level ).How do I go about this? Is there any user exit I can manipulate to trigger RSNAST00---->I found an exit in RVCOMFZZ- USEREXIT_KOMKBV3_FILL ..this subroutine is called before printing>...
I have not much clue how to go about this ?
Any Help on this would be highly appreciated.
Thanks
Shankar.

Hi Shankar,
how about an own output program? That can be triggered on header level, but can create outputs on item level.
Otherwise: looks difficult to get line level trigger, if SAP hasn't it up to now.
Regards,
Christian

PO output Validation at Item level

Hi All,
We have created VOFM routine for PO output. We have to validate at item level.But the structure KOMPBEA in the routine is empty and it is not executing KOMPBEA_FILL function module.
Is it possible to Validate PO output at Item level ?
if possible then how to fill KOMPBEA.
Thanks in advance.
Quadri.

I think you are working with RR scenario;
then SNC (RO) triger SD to create SO in ERP (not created in SNC).
PO number is not item level, it is header level, that means all the items of a PO have same PO number.
PO is created at customer system, so are you sending the PO numbers from SNC to your customer?

How to generate output in PO item level?

Hi All,
There's special requirement from users. They wan't to generate output for each item of purchase order. But the messages are only defined in PO header. Are there any solutions for these requirement? Moveover is there any way to generate IDOC for each of PO item? The systerm version is 46C.
Thanks

Go to PO change mode,Select the line item and besides deletion indicator there are teo indicators one to lock PO line item and another to unlock PO line item, select the unlock one.
Save po
Regards
PK

Smart from item level data display?

Hi EXPERTS,
i want to display the item level data by maintaining the parent and child relation. how it possible?

Hi ,
According to your requirement
Suppose
Your header & Item data it_vbak it_vbap
Put the loop node for it_vbak
Inside the loop as per your requirement u can design the table for it_vbap & print it ..
Let me know if any concerns...

Prevent duplicate form submission from same user

What's the best way to prevent the same person/computer from
submitting a form? I am wondering about cookies, ip address,
etc.

Rking1966 wrote
I am wondering about cookies...
You got me wondering, too. I thought of something like:
formPage.cfm
============
<cfif isDefined("cookie.isFormSubmitted") and
cookie.isFormSubmitted>
You have already submitted the form. You may only do so
once.<br>
<p>
<a href="someOtherBusinessPage.cfm">To
business</a>
</p>
<cfelse>
<form action="actionPage.cfm" method="post">
<input name="field1" type="Text">
<input name="send" type="Submit" value="Send">
</form>
</cfif>
actionPage.cfm
=============
<cfif NOT isDefined("cookie.isFormSubmitted")>
<cfcookie name="isFormSubmitted" expires="never"
value="true">
</cfif>

Form level v/s item level trigger in oracle forms

Hello Experts,
I am new in oracle forms.I am using forms 11g with weblogic server 10.3.5 at windows 7.I am very confused between Form level and item level triggers.What is the sense of use of when-button-pressed trigger at item level & form level.If I have this trigger form level then how could I check that is fired.
Thank You
regards
aaditya

979801 wrote:
Hello Experts,
I am new in oracle forms.I am using forms 11g with weblogic server 10.3.5 at windows 7.I am very confused between Form level and item level triggers.What is the sense of use of when-button-pressed trigger at item level & form level.If I have this trigger form level then how could I check that is fired.
Thank You
regards
aaditya
You need to clear you concept first..
Form level Trigger: code applied all respective item within the form
Item level Trigger: code applies for only the item that has the code.
try in a form and you will see the difference.
Hamid

PO idocs at line item level

Hi All,
I have a requirement to send all line items of PO as seperate idocs when it is created or changed. I am creating a output message to trigger, Purchase Order does not have output messages at item level. Is there a way i can send all items as inidividual items, by writing a routine in Output determination. Please let me know if there is an another way to do that.
Any help would be appreciated.
Thanks,
Kumar

Hi Guys,
Could you please update on this query ? Is there any way other than filling/Creating the IDOC in BADI?
I would like to create one IDOC per PO line item on change.
Appreciating your views.
Regards,
Guru

How to prevent duplicate records

Hello all,
This is just a general query. How do we prevent duplicate records at data target level(ODS/InfoCube).
Thanks
S N

Hi,
for ODS you can either specify in settings option "unique records" (only first combination of keys is saved, second one throws error message) or you can define "overwrite" for update rules to ODS (last occurrence of record is saved).
For InfoCubes I think there isn't such setting and there is no possibility of overwriting existing records. So you have to load first to an ODS object to ensure unique records and update from ODS to InfoCube.
Best regards,
Björn

Multiple Error message at Item Level....

Hi all,
I have some doubt into display multiple error message from item level.
The scenario is, I have to run some validation at each line item. If validation fails error message is population. Now suppose user ignore the error message or with that error user creating new line item and again because of validation some error occurs, then both error message should display all together but system is displaying only last message not previous one. This is happening with both the classes CL_BSP_WD_MESSAGE_SERVICE' and CL_CRM_GENIL_GLOBAL_MESS_CONT.
But if I check same thing with standard validation all error message display all together.
Any suggestion through which I can combined all message and display together.
Thanks
Gaurav

Yes.I have tried ADD_MESSAGE method of the CL_BSP_WD_MESSAGE_SERVICE class.
Thanks
Gaurav
Any suggestion from experts..
Regards
Gaurav
Edited by: Gaurav Mehta on Dec 3, 2010 2:18 PM

Prevent Duplicate Output Trigger from Item Level

Similar Messages

Maybe you are looking for