Problem in triggering the code for CO02 User Exit

Hi,
I am using the code for the Tcode CO02 (User Exit) and i am facing a problem that when i am using the code as a normal program it is executing fine and displaying the pop up window and showing the data in it.
But when i am using that code in the USER EXIT code it is not trigerring that pop up window.
I am using the enhancement:-
*PPCO0007 * - Exit when saving production order
And the include in which i am writing the code is :-
INCLUDE ZXCO1U06
plzz provide me guidelines for solving this problem.

hi ,
i am using the following: -
Enhancement No. -> PPCO0007 (Exit when saving production order)
When i click on the enhancement the following is displayed:-
Function exit -> *EXIT_SAPLCOZV_001 *
When i double click the function exit the code i had written in the following include:-
INCLUDE ZXCO1U06
plzz tell me whether i am doing it right or worng?

Similar Messages

Problem in fetching the code for the line item

Hi,
I am working on a report in which to display the values corresponding to the line item of a PO.
For, ex, if there are 3 line items 10,140,150 and their condition values such zing,zgrd,zbrd are the condition types consist of different values depending on the line item i.e. 10,140,150.
My problem is when i execute the code the data of 1st line item is correctly fetched but the rest 2 line item data is pasted as it is. only the main pricre changes and the code for zing,zbrd,zgrd remains same as it is in the first line item 10.
plzz proivde me guide lines how to solve this problem.
Here's d code:-
DATA : vspl LIKE konv-kbetr.
DATA : vspl1 LIKE konv-kbetr.
DATA : vkwert LIKE konv-kwert.
DATA: VSPL2 LIKE KONV-kbetr.    "ZING COST
DATA: VSPL3 LIKE KONV-kbetr.    "ZGRD COST
DATA: VSPL4 LIKE KONV-kbetr.    "ZBDL COST
LOOP AT item.
    SELECT kbetr FROM konv INTO item-rate WHERE knumv = header-knumv AND kposn = item-ebelp
     AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
      MODIFY item.
   ENDSELECT.
ENDLOOP.
LOOP AT item.
    SELECT kwert FROM konv INTO vkwert WHERE knumv = header-knumv AND kposn = item-ebelp
    AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
    ENDSELECT.
ENDLOOP.
CLEAR : vspl , vspl1 , vspl2 , vspl3 , vspl4.
LOOP AT item.
    SELECT kbetr FROM konv INTO vspl WHERE knumv = header-knumv AND kposn = item-ebelp
   AND kschl = 'ZCOM'.
    ENDSELECT.
    SELECT kbetr FROM konv INTO vspl1 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZBR1'.
    ENDSELECT.
*******************Begin - new code added on 14.01.2009******************
    SELECT kbetr FROM konv INTO vspl2 WHERE knumv = header-knumv AND kposn = item-ebelp
    AND kschl = 'ZING'.
    ENDSELECT.
   SELECT kbetr FROM konv INTO vspl3 WHERE knumv = header-knumv AND kposn = item-ebelp
   AND kschl = 'ZGRD'.
    ENDSELECT.
   SELECT kbetr FROM konv INTO vspl4 WHERE knumv = header-knumv AND kposn = item-ebelp
   AND kschl = 'ZBRL'.
   ENDSELECT.
*******************End - new code added on 14.01.2009******************
ENDLOOP.
LOOP AT item.
    item-rate = item-rate + vspl + vspl1.
*******************Begin - new code added on 14.01.2009******************
    item-rate1 = item-rate1 + vspl2.
    item-rate2 = item-rate2 + vspl3.
    item-rate3 = item-rate3 + vspl4.
********************End - new code added on 14.01.2009*******************
    MODIFY item INDEX sy-tabix TRANSPORTING rate.
*******************Begin -11`` new code added on 14.01.2009******************
    MODIFY item INDEX sy-tabix TRANSPORTING rate1.
    MODIFY item INDEX sy-tabix TRANSPORTING rate2.
    MODIFY item INDEX sy-tabix TRANSPORTING rate3.
*********************End - new code added on 14.01.2009******************
ENDLOOP.
PLZ PROIVDE ME GUIDLINES HOW TO SOLVE THIS PROBLEM .
Edited by: ricx .s on Jan 19, 2009 10:16 AM
Edited by: Vijay Babu Dudla on Jan 19, 2009 5:22 AM

Hello,
Why are you looping at the same internal table so many times, you could probably perform everything within one loop instead.
DATA : vspl LIKE konv-kbetr.
DATA : vspl1 LIKE konv-kbetr.
DATA : vkwert LIKE konv-kwert.
DATA: VSPL2 LIKE KONV-kbetr. "ZING COST
DATA: VSPL3 LIKE KONV-kbetr. "ZGRD COST
DATA: VSPL4 LIKE KONV-kbetr. "ZBDL COST
field-symbols <fs>.
LOOP AT item assigning <fs>.
SELECT kbetr FROM konv INTO <fs>-rate WHERE knumv = header-knumv AND kposn = item-ebelp
AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
MODIFY item.
ENDSELECT.
SELECT kwert FROM konv INTO vkwert WHERE knumv = header-knumv AND kposn = item-ebelp
AND ( kschl = 'ZP00' OR kschl = 'P001' OR kschl = 'PBXX' OR kschl = 'P000' OR kschl = 'PB00' OR kschl = 'ZING' OR kschl = 'ZBRD' OR kschl = 'ZGRD').
ENDSELECT.
ENDLOOP.
CLEAR : vspl , vspl1 , vspl2 , vspl3 , vspl4.
SELECT kbetr FROM konv INTO vspl WHERE knumv = header-knumv AND kposn = item-ebelp
AND kschl = 'ZCOM'.
ENDSELECT.
SELECT kbetr FROM konv INTO vspl1 WHERE knumv = header-knumv AND kposn = item-ebelp
AND kschl = 'ZBR1'.
ENDSELECT.
*******************Begin - new code added on 14.01.2009******************
SELECT kbetr FROM konv INTO vspl2 WHERE knumv = header-knumv AND kposn = item-ebelp
AND kschl = 'ZING'.
ENDSELECT.
SELECT kbetr FROM konv INTO vspl3 WHERE knumv = header-knumv AND kposn = item-ebelp
AND kschl = 'ZGRD'.
ENDSELECT.
SELECT kbetr FROM konv INTO vspl4 WHERE knumv = header-knumv AND kposn = item-ebelp
AND kschl = 'ZBRL'.
ENDSELECT.
*******************End - new code added on 14.01.2009******************
<fs>-rate = <fs>-rate + vspl + vspl1.
*******************Begin - new code added on 14.01.2009******************
<fs>-rate1 = item-rate1 + vspl2.
<fs>-rate2 = item-rate2 + vspl3.
<fs>-rate3 = item-rate3 + vspl4.
ENDLOOP.
Also, use field-symbols and use loop at itab assigning addition so that you can directly change the contents of the table without using modify statment.
regards,
Advait

Checking code for SAP USER EXIT

we have enhanced SAP given data-source 2LIS_XX_XXXXX, there are hard coded user exits for this extractor. How to debug the code for enhancements?
I know we enhance data-source in CMOD....SAPLRSAP001 (transactional data)....SAPLRSAP002(attributes)

Hi Monica,
There are many ways to debug the code if you wish to enhance the DataSource. In RSA3 you can do that by clicking Debug mode option. This is already been suggested by Srini.
I would like to give you another way to do so.
If you want to enhance the Transcational data then you need to choose EXIT_SAPLRSAP_001 component of RSAP001 enhancement. It has 4 component for master data( Text, hierarchy...etc).
This is a function module enhancement. If you goto the source code of the function module, you will find an include program i.e. ZXRSAU01. double click on this program which will take you to the body of the program. This is the place where you need to write code.
here you need to write the code as follows.
case i_datasource.
when '2LIS_XX_XXXXX'.
Now here you can set a break point. This can be soft or hardcoded break point if you need to debug.
Better Hardcode it. Write
BREAK-POINT or BREAK username.
Now when you execute the DS through RSA3, The program will stop here. The data extracted from DS will be available in an internal table C_T_DATA. Now you can enhance this by writing code. Again you can debug by pressing F5 or F6. This is as usual the way you debug an ABAP program.
Hope this helps. If you need any further help contact at [email protected]
Give reward point if you're satisfied.
Happy debugging....
cheers,
Message was edited by: tapan tripathy

Why the code in a user exit is executed twice?

Hi all,
I've got a development in a user exit EXIT_SAPMP56T_001.
This user exit allows us to control the travel expenses.
When you go to the TX: PR05 you can see a list with travels to add expenses. Here you can select one item on the list and press the edit button to add new expenses.
We want to control this and we use this user exit for that purpose.
When the user selects a row and presses the edit button, the user exit is triggered. We can check the values of the table and see which row is selected. But this exit is executed twice. The first time the table doesn't have any changes on it, the second time it has marked the selected row.
Why is this happening? Why is this exit executed twice? And how can I control that the table is properlly updated?
Thank you.

Hi,
I think this user exist in getting triggered both in the PAI and PBO of that screen.
For avoiding this use the flag.
If flag is initial then only your code needs to trigger.
if flag is initial.
flag = 'X'.
then your code.
endif.
So when it again comes into the PBO it will check the flag and the same code will not be triggered for the second time.
With Regards,
Sumodh.P

What is the name of the table for finding user exit !

What is the table name to find the user exit !

Hi,
Goto to the table tstc and enter the transaction code for
which u want to find out the User-Exits. Check out the
program name from the result. Goto SE38 and dee that
program in display mode. Then search for the string Call
Cutomer-Funtion. All the result of search are the user
exits defined there for that transaction.
SAP user exits (enhancement names that we see in SMOD transaction) are all stored in the table MODSAP. The field NAME contains the enhancement name and the field MEMBER contains the name of the function module that will be called if the customer enhancement exists and is active. The customer enhancement projects are stored in the table MODACT. There, the NAME field is the name of the project and MEMBER is the name of SAP enhancement (that from the MODSAP).
So, if you are in some include, you can use where-used-list to get to the function module name. Then you find the SAP enhancement name from the MODSAP by supplying the function module. And finally, you find the customer enhancement projects by querying the MODACT with the SAP enhancement in the field MEMBER.
cheers,
vasavi.
kindly reward if helpful.

T.codes for MM User exit

Hi Alll,
Could any body tell me the transaction available to check the user exits for PR,PO and so on
thanks in advance
regards
sapmm

Sapmm,
I am not sure what you mean by check. I will assume you want to know which user exits are available. From here you can discover which ones, if any, are actually being used, and what they actually do, by reviewing the developed code using one of the ABAP editors.
You can use SMOD to review all enhancements, but I find it a little less confusing to use the following method. Try this:
SPRO > IMG > Search (binoculars) for "Enhancements". In the search results, they will be ordered by functional area (the right hand pane) Scroll down to the functional area of interest (You will get BADIs as well using this technique). Select the item of interest and go there.
You will be taken to the config section for that enhancement. Select the 'IMG actitivy documentation' icon (paper to the left). It will give a brief description of the standard enhancements. You can review these in detail using SMOD.
If any userexits have actually been implemented in your system, it will be via a project. You can review existing projects using CMOD. Select any active projects and review to see which enhancements have been assigned to the projects.
Normally, the above tasks are performed by an ABAPer. Most functional consultants don't get into the nasty details of Userexits.
Rgds,
DB49

I'm using the EXIT_SAPLV56U_004 for my user exit of transaction VT02N

Hi all,
In the function module EXIT_SAPLV56U_004 .There are I_XVTTK Shipment Headers (Current), (old).....
so which table i have to use according to my requirement for further coding in that function module...
Thanks & Regards,
Santhosh kumar.R

Hello,
Please put a break point in the code of exit and see the value flowing into the exit field under different scenarios..you will be able to understand the population of fields ...when they will occur
This way the data credibility can be assured..Pls try if it can be used
Regards
Byju

Problem in Triggering the Mail to SAP Inbox

Dear Experts,
                 I have a problem for triggering the Mail option to SAP Inbox.
We created a Job assigning the program RSEIDOCA,RSWUWFML2 by creating a variant for those programs. We are scheduling the job, It is showing as
24.11.2010 12:43:46 Job started                                                                     00           516          S
24.11.2010 12:43:46 Step 001 started (program RSEIDOCA, variant ZRSEIDOCA, user ID__ )        00           550          S
24.11.2010 12:43:48 Error situation found by evaluation                                             E0           596          S
24.11.2010 12:43:48 Step 002 started (program RSWUWFML2, variant ZRSWUWFML2, user ID__)      00           550          S
24.11.2010 12:43:49 Job finished                                                                    00           517          S
But while checking in SOST, we are unable to see those mails. eventhough the user is unable to get those mail in SAP INBOX.
I think, is there any authorization problem while triggering the mail for that particular user id.. Please tell me the solution, this is very high requirement for me.
Thanks in Advance.
Regards,
Srini

Hi Chandra,
          Thanks for your reply. Actually i am not workflow consultant, thats why i asking this question. Where to assign the Receipient Type and Recipient Notification.
you give Recipient Type as position and Recipient of Notification must be position of the reciepient,
Regards,
Srini

Can not view the code for views, triggers or table definition

Hello Gurus,
I can not see the code for any of the triggers, views, tables etc. in sql developer. For instance a view code will be
"create or replace" and then nothing, I could see the code in the past.
When clicking on SQL tab for table I get following errors
1. Ora-00904 Invalid Column name
2. Ora-31600: invalid input value emit_schema for parameter name in function SET_TRANSFORM_PARAMORA-06512: at SYs.DBMS_SYS_ERROR............................
please advice.
Thanks

Sqldev was only certified starting from 9.0.2, so it's possible that's the culprit. The latest update in the certification document even omits 9i entirely.
Did it start happening after upgrading sqldev? What version are you on?
K.

Has anyone one else had problems redeeming the code for the free onetime download of Star Trek 2009 Movie?

Has anyone one else had problems redeeming the code for the free onetime download of the Star Trek 2009 Movie?

dawnfromcabot wrote:
ITUNES HAS CHARGED MY DEBIT CARD $99.99 FOR GLOBAL WAR RIOT-SOME GAME I DID NOT KNOW WAS LOADED ON MY OTHER PHONE; HOWEVER, WHEN I PULLED UP THIS APP TO SEE EXACTLY WHAT IT WAS WAS I SURPRISED TO SEE I COULD DOWNLOAD IT FOR 'FREE'. I HAVE CONTACTED ITUNES THROUGH THIS REDICULOUSLY CHICKEN SH_T SYSTEM THEY USE SO THEY DO NOT ACTUALLY HAVE TO HEAR HOW UPSET A PERSON IS NOW THAT THEY CANNOT BUY FOOD FOR THEIR CHILDREN BECAUSE OF A MISTAKE MADE ON ITUNES PART. I DID RECEIVE AN EMAILED RESPONSE FROM STEPHANIE WHO ADVISED THIS WAS PUCHARED ON A PHONE THAT HAS PURCHASED DOWNLOADS IN THE PAST. I WONDER IF SHE THOUGHT TO LOOK AT MY ENTIRE DOWNLOAD HISTORY AND DISCOVER THAT NOTHING HAS EVER BEEN PURCHASED ON MY ITUNE ACCOUNT IN THE AMOUNT REMOTELY CLOSE TO WHAT THEY ARE CHARGING ME NOW. THAT IS BECAUSE I DO TRY TO MONITOR THIS ACCOUNT AND OBVIOUSLY THIS LAST PURCHASE WAS DONE WITHOUT MY KNOWLEDGE UNTIL I CHECKED MY ONLINE BANKING ACCOUNT, WHICH I DO EVERY DAY. TO MAKE MATTERS WORSE THE APP STATES IT IS FREE TO INSTALL WHEN YOU PULL IT UP SO NO ONE HAS CLARIFIED TO MY WHERE THE $99.99 COMES INTO PLAY. I WILL NOT DROP THIS UNTIL MY BACK ACCOUNT HAS BEEN PROPERERLY CREDITED IN THE SAME TIME FRAME IT TOOK YOU TO TAKE MY MONEY. I WILL LAUNCH A COMPLAINT WITH EVERY POSSIBLE ENTITY IN THE ITUNES COMPANY AND BUSINESSES OUTSIDE THAT REGULATE THEIR BUSINESS UNTIL THIS HAS RESOLVED IN MY FAVOR AS I AM THE ONE WHO HAS BEEN VICTIMIZED BY A COMPANY I INVITED INTO MY TELEPHONE NETWORK IN GOOD FAITH!!!!!!!!!!!!
Reading that is giving me a headache, how about normal type.

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Facing problem with the code for sending an .xls attachment via email, a field value contains leading zeros but excel automatically removes these from display i.e. (00444 with be displayed as 444).kindly guide .

Hi Chhayank,
the problem is not the exported xls. If you have a look inside with Notepad or something like that, you will see that your leading zeros are exported correct.Excel-settings occurs this problem, it is all about how to open the document. If you use the import-assistant you will have no problems because there are options available how to handle the different columns.
Another solution might be to get familiar with ABAP2XLS-Project. I got in my mind, that there is a method implemented, that will help you solving this problem. But that is not a five minute job
~Florian

I have the code for this project, but how do I add this user-defined exception that I want?

For a final VB.NET project, I have to write a project that ascends and descends a word or number chosen by the user.
This is what I want to do:
I want to add a user defined error that will stop the program and tell the user to input a value into the program if they did not. I do not know how to do this. I think I would use a Null Reference exception.
Here is the code for the project:
Module Module1 'VB.NET Final Project 12/30/14 . Option 3: Write a program to run two separate threads printing numbers or words (It can do both) in ascending and descending orders. The words have to be given by the user.
Dim Ascending As System.Threading.Thread = New Threading.Thread(AddressOf PrintAscend) 'Two threads are declared,
Dim Descending As System.Threading.Thread = New Threading.Thread(AddressOf PrintDescend) 'ascending and descending
Sub Main()
Console.WriteLine("VB.NET Final Project 12/30/14 . Option 3: Write a program to run two separate threads printing numbers or words (It can do both) in ascending and descending orders. The words have to be given by the user.")
Ascending.Start() 'starts first thread
End Sub
Sub PrintAscend()
Console.WriteLine("Please type in a word to print in ascending order.") 'the program asks for users to input a word
Dim input As String 'as a string
input = Console.ReadLine()
For i As Integer = 0 To input.Length - 1
Console.WriteLine(input.Chars(i)) 'prints the letters of the word in ascending order
Next
If Ascending.ThreadState = Threading.ThreadState.Running Then Descending.Start() 'starts second thread
End Sub
Sub PrintDescend()
Console.WriteLine("Please type in a word or number to print in descending order.")
Dim input As String
input = Console.ReadLine() 'user inputs the word that he wants
For i As Integer = input.Length - 1 To 0 Step -1
Console.WriteLine(input.Chars(i)) 'prints the letters of the word in descending order
Next
Console.WriteLine("Please press enter key to close the program, and thanks for your time.")
Console.ReadKey()
End Sub
End Module

Dejavu again?
Is your teacher instructing you to use a User Defined
error or do you just want to accept the user input, check it, give a message, and repeat?
It seems to me you are missing the basic program loop? This example checks the user input and then performs an action, then repeats. If the user enters Quit execution stops. Is that what you want to do?
Module Module1
Sub Main()
Console.Title = "Make a Decision"
Dim theline As String = ""
Do While theline <> "Quit"
Console.WriteLine(vbLf & "Enter a or b." & vbLf)
theline = Console.ReadLine()
Select Case theline
Case "a", "A"
Console.WriteLine(vbLf & ">> Result: You entered A.")
Console.WriteLine(vbLf & " ** Output Complete **" & vbLf)
Case "b", "B"
Console.WriteLine(vbLf & ">> Result: You entered B.")
Console.WriteLine(vbLf & " ** Output Complete **" & vbLf)
Case Else
Console.WriteLine(vbLf & """" & theline & """ is invalid.")
End Select
Loop
End Sub

Reg : change pointer mechanism for triggering the IDOC for delivery note

Hi ,
I am working on a change pointer mechanism for triggering the IDOC for delivery note and will be using this message class DESADV.
So SAP has suggested for assigning the message class DESADV with the function module in MASTERIDOC_CREATE_SMD_DESADV in BD60 transaction code.
So I was looking to create this MASTERIDOC_CREATE_SMD_DESADV function module in SAP and SAP suggesting that we should create this MASTERIDOC_CREATE_SMD_DESADV function module as same as the function module MASTERIDOC_CREATE_SMD_MATMAS.
So do anyone knows that is there any tool has been provided by SAP for creating this function module MASTERIDOC_CREATE_SMD_DESADV in SAP system for triggering the change pointer mechanism for outbound Delivery.
Thanks !
Regards,
Kiran

Hi,
When you are change pointer the system itself will take care of sending the changed master data to your partner system and the user will not have any intervention. If you really wanted to have that then you need to use the change pointers to read the master data which is modified in a custom program and then display that on the screen. Once the user selects that master data records then trigger an IDOC for creating the idoc for that master data and also flag that master data record as processed in the SAP BDCPS standard table, so that the same record will not be picked. If you wanted to know how the change pointers piece of code is written go through the program RBDMIDOC and you can understand how the change pointers logic is written.
Thanks,
Mahesh.

What would be the code for a previous button?

I am passing Strings from an array to JTextArea. When I hit the "next" button on my jtoolbar, it shows the next string in the array. This is the code I have for the next button:
static final public String NEXT = "next";
String cmd = e.getActionCommand();
String[] arr =
"the strings",
"that i am",
"passing to JTextArea"
if(NEXT.equals(cmd)
showNextValue();
public void showNextValue()
textArea.setText(arr[index]);
index = (index+1)%arr.length;
My question is:
how would I write the code for the method showPreviousValue() without getting an indexoutofbounds exception? It would do the same thing as showNextValue, but show the user the previous string when they hit the previous button.
Thank you!!!

how would I write the code for the method showPreviousValue() without getting an indexoutofbounds exception?I'm guessing that you tried something and got an IndexOutOfBounds exception. You might do better to post what you tried.
Basically you need to figure out why the exception occurs - for instance by printing the value of the expression that you were using as the index value. And then figure out some way of avoiding that problem. (Probably a little bit of arithmetic.)

Am i the only one who when trying to enter the code for creative cloud activation ?

I give up,i have been trying to activate a 3 month subscription for CS6 from Staples and every time i try the code it will not work. I have used the chat live and spent about 3 hours already going nowhere. I do not like talking on the phone to some help desk overseas and the only thing i think left to do is to return the junk.

I tried all that and even took a picture of the numbers and blew them up so a blind person could read them and had 3 others read them off. A simple way to fix the problem is get someone on Adobes staff to find a font that most people can read from whatever product the stick it to.
John McDonough
Date: Wed, 1 Aug 2012 18:33:58 -0600
From: [email protected]
To: [email protected]
Subject: Am i the only one who when trying to enter the code for creative cloud activation ?
    Re: Am i the only one who when trying to enter the code for creative cloud activation ?
    created by David__B in Adobe Creative Cloud - View the full discussion
Hey John,
Not sure if it helps or not, but I know sometimes with codes like that its really hard to tell certain characters apart, O - like in Oscar versus 0 - number and number 1 versus lowercase L like in Lima.
Might test entering it both ways if you have any suspect characters?
-Dave
     Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: http://forums.adobe.com/message/4592955#4592955
     To unsubscribe from this thread, please visit the message page at http://forums.adobe.com/message/4592955#4592955. In the Actions box on the right, click the Stop Email Notifications link.
     Start a new discussion in Adobe Creative Cloud by email or at Adobe Forums
For more information about maintaining your forum email notifications please go to http://forums.adobe.com/message/2936746#2936746.

Problem in triggering the code for CO02 User Exit

Similar Messages

Maybe you are looking for