Problem in undo TECO

dear
all
we have done teco to WBS element.now we want to UNDO
teco it is not happenig , and also it is not giving any message how to solve this problem.
Thanks and regards
madhu

Hi Madhu,
The system should give some message for not allowing the status change.
Please check if your there is any user status for this WBS element.
Please let us know the feedback.
Regards,
Amit

Similar Messages

Authorization object for "set TECO" and "undo TECO"

We want to control the authorization for "set TECO" and "undo TECO",but we can't find relevant Authorization object. Is there any Authorization object for these two functions? If there's no Authorization object for them ,then how can we achieve the same result? Thank you very much!

Hi,
Under one user ID the auth object B_USERSTAT will have the authorization key in which user will be responsible to change the TECO user status.
One user will not have any authorization key under B_USERSTAT Auth_Object.
Hope it's will give you help.
Regards,
Vishal Kr. Sharma

Problem with Undo manager using highlighting

Hello,
I am writing a little text editor with syntax highlighting, but I have a problem with the UndoManager.
Everytime I undo an action the UndoManager removes just the attributes of the text, not the text itself.
Does anybody know a way how to make the UndoManager not recognizing the attributes.
Thanks in advance.

In your UndoableEditListener, you can check the type of the edit, and ignore it if it's an attribute change:
    public void undoableEditHappened(UndoableEditEvent e) {
        UndoableEdit edit = e.getEdit();
        if (edit instanceof DefaultDocumentEvent &&
            ((DefaultDocumentEvent)edit).getType() ==
                DefaultDocumentEvent.EventType.CHANGE) {
            return;
        undoMgr.addEdit(edit);
    }

Jdeveloper - Problem with undo/redo

Hi,
I am facing a problem while using the Undo/Redo option in jdeveloper. When i press the CTRL+Z(undo) option for a lengthy changes, the CTRL+Y(redo) option is not working properly.
- Shankar S

In my experience of JDev, The correct keyboard shortcut for redo is Shift + Ctrl + Z .
Ctrl + Y deletes the current line.
I don't know if that can be changed.
Remi

Problem with undo/redo actions in a StyledDocument

Hello,
In my app i have a text area where each user can keep some notes.The document is serialized and saved in the database for later access as StyledDocument, in order to be saved with the formating the user has chosen(for example with certain fonts,text color and size).
What i want to do now is to give to the user the ability to undo/redo his actions. I have these methods implemented and everything worked fine when i was saving and loading simple text in my JTextPane (previously i was saving in the database what user typed as a simple string which meant that the formatting was lost). Now, after loading styled document (using the textPane.setStyledDocument(doc) code line) these actions do not work.
Are there any suggestions on how i can make this work? Is it possible?
I hope i made my problem clear enough
Thanks in advance

Seem like I found the answer to my issue: http://helpx.adobe.com/dreamweaver/using/whats-new-2014.html#Undo/Redo enhancements
Undo/Redo enhancements
All undo/redo actions are recorded at the HTML file-level. This means, any manual changes to a CSS file can be undone from ANY related file.
Someone called it Undo/Redo enhancements!? Damn this is the most stupid thing one can imagine about undo/redo! How the heck editing one source file affects the other!? Do whatever you want in Designer mode, but I'm editing SOURCE CODE and need to be able to undo/redo my actions on a file level.
With this change TextEdit or Notepad becomes a more suitable tool for editing HTML/CSS than Dreamweaver.

How to make a similar panel like Links in InDesign (Problems in UnDo case of DocObserver).

I want to implement the similar operation as that of the Links panel Plugin.
Whenever a new image is placed on the document its should populate in the tree. And when it is deleted it should disappear.
I am able to do that by using a DocObserver, but the issue is that in when an object is placed on the document it populates on the tree but when Ctrl+Z is done it does not get disappear from the tree though it diappears from the document.
Similar is the case for the deletion of any image frame, when deleted it disappers from the tree but when it is undone it though come back on the document but does not appear on the tree view.
The code was working fine in CS2 as i was able to use the case
if((protocol == IID_IHIERARCHY)
(theChange == RemoveFromHierarchyCmdBoss || theChange == kAddToHierarchyCmdBoss )) in the update but in CS3 there is no UnDo support for coading so I am unable to trap that event in the update and remove the object from the tree.
But positively there would be some way to implement the required operation as it is done for the Links panel.
Plz anybody help me and kindly reply ASAP for that Advance thanks...

Hi Rizwan.
As you know, linking and unlinking of images are performed by the
kAddLinkCmdBoss and the
kRemoveLinksCmdBoss respectivley. These are most likely broadcasting the change on the
kDocBoss on the
IID_ILINKSMANAGER protocol. If you attach an observer to listen to this protocol you should be notified correctly, even during undo.
Regards,
Andreas

Problem with UNDO tablespace

Hi guys.
Our database has 50GB of undo tablespace. I decided to create a second undo tablespace and switch to the new one. Since doing that yesterday, the size of the old undo is 49GB (was thinking that the values will drop to zero) and the new tablespace keeps increasing in size! Its size now is about 20GB. I do have the following question.
a) If I restart the database, it the value of the old undo going to fall to zero?
b) undo_retention=86400. Setting this value to a lesser value say 800seconds, it is going to act the performance of the database? Is it going to release the space on the old undo?
Thanks and any help is appreciated.
David

The undo tablespace will not automatically shrink size, since you have a new undo tablespace in place. You can drop the old one if you don't plan to use it.
Set lower undo_retention will certainly help to contain the undo space usage. However you should query v$undostat and v$rollstat to estimate the amount of undo space required for the current workload then size the undo tablespace accordingly. Turn off the auto extend on undo tablespace.

Problems to set TECO status in PM work orders

Hi all,
I have the next situation: I have a PM work order and its status is Released (REL). When i try to set TECO status (technnical complete), the system send me the following error: " to close order must change user status to TECO ". I am not using USER STATUS ... I just using system status ... that's the reason I dont understand the error.
Thanks for your answer.

Hi,
The message sounds like a custom message. Is there any exit active that might be checking for a specific user status? Maybe customer exit IWO10004 (EXIT_SAPLCOIH_004), this is executed when orders are technically completed.
-Paul
Use Enterprise Asset Management (EAM) forum for PM/CS specific topics
Enterprise Asset Management (SAP EAM)

Problems with "Undo"

Wow - I've never seen anything like this happen with a piece of software. Updated to 1.4.1 Windows. Working on a batch of photos. While adjusting the color of one photo (church with a combination of natural, incandescent and flourescent light - ouch!), I got to the point where I wanted to undo the changes that I made to the image. I clicked on the Edit, then "Undo Orange Hue Shift". After clicking this, Lightroom proceeded to undo everything that I had done during the session, then import 17 photos from a previous session into the current catalog! Really bizarre. Needless to say, I'm back to square-one after a two hour editing session, and a bit gun-shy about clicking on the undo button again.
Is this an 'undocumented feature' in this version of Lightroom, or did the bugs just decide to bite me today? BTW - No Virus's or Spyware, plenty of memory (2 gig) and drive space (300 gig). Intel Pentium IV 2.8 gHz processor, with hyperthreading. Catalog file was backed up and tested before session started.

I'm now running version 1.4.1 and have experienced this "multiple undo" bug for multiple versions. I sent Adobe Support a message about this several months ago but got no response. Maybe they sometimes monitor this forum . . . It seems that whatever triggers the bug undoes all my edits going back to the last image which I had deleted from my catalog - either/both 'deleted from disk', or just 'removed from the catalog.' I experienced this bug today, and was dismayed to watch it rapidly undoing maybe 50 edits across multiple images. Shortly afterwards, as I scrambled to repair the damage, I got an error message: --------------------------- Lightroom --------------------------- Database "D:\<snip>...Lightroom1.lrcat": unable to open database file Statement: SELECT id_local FROM Adobe_images WHERE masterImage = ? and was unable to access the Develop controls for several images. This message appeared every time I clicked the File menu, but Alt+F4 eventually succeeded in closing Lightroom; it seems OK once restarted.

Problems: undoes sleep, and won't give up

Folks:
A few days ago, I connected a new Seagate 1.5TB drive (USB2), accepted an offer to format the drive, and enabled TM. (Or was it vice-versa? I don't recall.)
First Problem: Something undoes sleep
Since then, when I use Apple Menu "Sleep" the system goes to sleep, and that wakes up a few seconds later. Always. This cannot be good for the system, and it isn't good for my electricity bill.
Is this waking due to enabling TM and/or attaching the Seagate drive? It seems likely, as it started happen just after I enabled TM, and I am certain I have done nothing else to the system that should affect sleep. About "Put the hard disk(s) to sleep when possible" in the Energy Saver Control Panel: I routinely leave this ENABLED. I've tried both settings since I enabled TM. No difference.
I routinely leave the Energy Saver "Put the computer to sleep when it is inactive for" setting to 15 or so minutes. Since the computer was not been asleep any morning when I start work since I enabled TM, I assume this route to sleep also fails.
Q1: How to restore sound sleep on my system?
Second issue: Won't give up.
At the moment, the TM monitor icon at the upper right of my screen is circling. It's been circling for at least 15 minutes. Before that I noticed that TM had started a backup. I checked: it was going to back up only 552 KB, which seemed reasonable -- I haven't been doing very much so far this morning. I checked minutes later. No sign of progress. I checked a few minutes later, no progress, so I clicked on the 'x' to abort the backup. Now the top entry on the TM monitor pulldown has been reading "Stopping Backup" for at least 5 minutes.
What to do? TM won't be able to do the next hourly backup if it's still trying to abort the previous one. I tried disabling TM in its Control Panel. It's now off, and yet both the Control Panel and monitor say it's back to trying to backup 552KB ... again.
I'll try dismounting and remounting the external drive. If that fails, I'll restart the system. But, of course, neither of these should be necessary.
BTW, strangely, the full TM menu says the last backup was at 3:10 AM, almost 7 hours ago. Since I didn't try to put the system to sleep last night at about 10pm, and it wasn't asleep when I arrived ... why 3:10? Maybe that's when the Unix cron-timed daily maintenance was done?
By the way, the USB drive IS alive and working. I opened it, found a random file from one of the backed-up folders, and copied it to my internal drive, no problem.
Q2: How to definitively abort a backup?
Q3: How to avoid hung backups in the future?
TIA,
Henry

Pondini:
Thanks for your response!
1. Exclude your TM disk from any anti-virus scanning.
None running.
2. Exclude it from Spotlight (System Preferences > Spotlight > Privacy)
Done! The next hourly scan was running so I aborted it by unmounting and remounting the external disk. When I remounted, TM appeared to be in a consistent, "happy" state. So I chose "Back Up Now" and the backup ran without apparent problem.
So far, so good, Excluding seems to have helped. I'll post back if anything different happens at the next hourly backup, or overnight.
3. Until you resolve this, leave the Put the hard drive(s) to sleep . . .
option OFF.
I did that before my original post, and left it disabled.
My system still won't stay asleep for more than a few seconds.
How is your USB disk attached to your Mac (direct or via USB hub;
port on back or keyboard)?
Directly to the back of the machine. My Mac did not seem to like for it to be connected though my external hub -- it complained about not enough power and shut down the hub. That seems strange, because both the drive and the hub are powered separately by wall-warts. But that's not an issue now.
There may be some clues in your logs. Download the Time Machine Buddy widget
from: http://www.apple.com/downloads/dashboard/status/timemachinebuddy.html.
I'll just use the standard log interface... It shows some nice messages for successful TM backups. Two messages seem to correlate with TM hangs. Here they are:
Indexing a file failed. Returned -1120 for: /private/tmp, /Volumes/Time Machine Backups/Backups.backupdb/Espresso/2009-04-28-041015.inProgress/02A5D71D-2086-47 E0-A006-3C8030F2CAD8/Espresso's HD/private/tmp
Indexing a file failed. Returned -1120 for: /Library/Caches, /Volumes/Time Machine Backups/Backups.backupdb/Espresso/2009-04-28-041015.inProgress/0B66D534-640A-4F 08-9ED4-CBB0F3872450/Espresso's HD/Library/Caches
I googled around about "Indexing a file failed" in connection with TM, but I didn't find anything that useful.
You did this via the Finder? For experimenting, that's ok, but normally to
restore a file/folder from your backups, use the TM interface Enter Time
Machine. Using the Finder can result in permissions problems with the copied
files. Also be very careful not to use the Finder to change, move, or delete
anything in those backups...
Thanks for the warning. I figured as much. I just located a small file on the TM disk and made a copy of it on my internal drive. Simply copying a file from the TM backup directories should not be a problem. If it is, that would indicate TM is a lot less stable than it should be.
By the way, my profile is wrong. I'm running 10.5.6, fully updated.
Thanks,
Henry

Problem with unwanted purchases

Hello to everyone, I have a problem with iTunes store. Recently I purchased an album from the store but there was some kind of problem with it and it appears to have been purchased 3 times! the first one of course is ok, payed, dowloaded and that's it. The others instead, I can't get rid of them! iTunes store notifies that the payment method is invalid (of course, there's no more money on that card) and I can't signal the problem to undo the purchase and have a refund. Any suggestion? Thanks (sorry for bad English, it's not my mother language)

If I had this situation, I'd look at a 3rd-party iPod manager.
Zevoneer has some solutions for you here:
http://discussions.apple.com/thread.jspa?messageID=8756281

Restore / Recover / Overall nice treatment of UNDO

Hi,
I'm updating our 'Backup and Recovery Bible' which was written when UNDO was but a twinkle in the eye of Oracle Developers. I'm a bit unsure of how recovery should be done in the event that the UNDO tablespace or any of its datafiles dies.
I do know that I can create another UNDO tablespace if for example we lose one of the datafiles that isn't being used at the time of the failure. But could someone point me to a good link or comment on what should be done if we have a problem with UNDO in terms of restore / recover / RMAN usage etc.
We're using both 9i and 10g on Solaris. For the moment no interface to a media manager.
Cheers.

Confusion sets in.
I don't understand why (after renaming an undo datafile to OFF_undo) I'm not getting anything in the v$recover_file view.
undo datafile name changed
SQL> create table lambda (col1 varchar2(10)) tablespace users;
create table lambda (col1 varchar2(10)) tablespace users
ERROR at line 1:
ORA-00604: error occurred at recursive SQL level 1
ORA-01116: error in opening database file 2
ORA-01110: data file 2: '/database/data01/z111ot11/undo_01.dbf'
ORA-27041: unable to open file
SVR4 Error: 2: No such file or directory
Additional information: 3
SQL> SELECT FILE#, ERROR, ONLINE_STATUS, CHANGE#, TIME
FROM V$RECOVER_FILE; 2
no rows selected
SQL> COL DF# FORMAT 999
SQL> COL DF_NAME FORMAT A35
SQL> COL TBSP_NAME FORMAT A7
SQL> COL STATUS FORMAT A7
SQL> COL ERROR FORMAT A10
SQL> COL CHANGE# FORMAT 99999999
SQL> SELECT r.FILE# AS df#, d.NAME AS df_name, t.NAME AS tbsp_name,
2 d.STATUS, r.ERROR, r.CHANGE#, r.TIME
3 FROM V$RECOVER_FILE r, V$DATAFILE d, V$TABLESPACE t
4 WHERE t.TS# = d.TS#
5 AND d.FILE# = r.FILE#
6 ;
no rows selected
Nothing in the alert.log either. If the UNDO is that important - why isn't the database screaming at me?

OpenSuse Undo/Redo doesn't work when click on web links

OpenSuse 12.2 Firefox 17 Undo/Redo doesn’t work when click on link . All web pages have some problem. Undo/Redo working for web page "Find" text box. All web pages

Clear Cookies & Cache
* https://support.mozilla.com/en-US/kb/Template:clearCookiesCache
Clear the Network Cache
* https://support.mozilla.com/en-US/kb/How%20to%20clear%20the%20cache#w_clear-the-cache
Troubleshooting extensions and themes
* https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes
Check and tell if its working.

Reversing TECO status for Multiple WBS elements

Hi,
Question on setting and then reversing TECO status for a WBS element.
When a project is closed technically in project builder, all underlaying items (wbs, network/activity) are technically closed as well.
When you try to undo this, only the status of the top element is changed, not the underlaying items.
Is there any way in which we get the underlaying items changed as well (mass change is not an option)
Regards,
Jatinder Bansal

You can try two methods :-
1. Open project in project builder, Select project definition and then go to WBS Overview under project definition, now select all WBS Element and then undo TECO status. Now all the WBS status will be updated. But, this will not have any effect on network and its activities.
2. Open the project in planning board, now select all the objects, now undo the TECO status. This will change the status of all selected objects like WBS,Network and activites....

How to undo smartmix in existing project

I have problem of undoing smartmix in my existing project. Any body knows this?

Assuming you have Premiere Elements 11: Go to Expert View, select the audio (portion of) clip that has the key frames on it. select the "Adjust" button in the top-right side of the app, next to the monitor. Here open the keyframes view by clicking on the little "Show/Hide Keyframes Window" button (marked "1" in the screenshot) on the top right of the window (to the right of the name of the Window which should be called "Adjustments). Once this view is expanded, click on the "Toggle Animation" button (marked "2" in the screenshot) which should look pressed again near the top of the window. This will prompt a message box that asks if you want to delete all key frames. Say OK here and you should be done.
The method is similar in previous versions of Premiere Elements as well, but is placed in "Applied Effects" panel I think.
Here is a screenshot of the button positions.

Problem in undo TECO

Similar Messages

Maybe you are looking for