Problems to set TECO status in PM work orders

Hi all,
I have the next situation: I have a PM work order and its status is Released (REL). When i try to set TECO status (technnical complete), the system send me the following error: " to close order must change user status to TECO ". I am not using USER STATUS ... I just using system status ... that's the reason I dont understand the error.
Thanks for your answer.

Hi,
The message sounds like a custom message. Is there any exit active that might be checking for a specific user status? Maybe customer exit IWO10004 (EXIT_SAPLCOIH_004), this is executed when orders are technically completed.
-Paul
Use Enterprise Asset Management (EAM) forum for PM/CS specific topics
Enterprise Asset Management (SAP EAM)

Similar Messages

PM: Problemas de "Print Preview" al imprimir varias Work Order

Buenos dias Estimados,
Estoy experimentando problemas a la hora de imprimir varias Work Orders usando las transacciones IW32 , IW33 y IW38.
Al intentar imprimir 20 work orders juntas, 20 ventanas de Print Preview aparecen asi dificultando la impresion de multiples work orders.
SI alguien tiene alguna respeusta o ayuda para resolver este problema de setting se agradece.
Gracias!

Hola:
Se me ocurre que podría ser que estuvieses llamando a tu programa de impresión cada vez que quieres realizar una copia de tu formulario. Eso no es necesario ya que puedes enviar el número de copias por parámetro a tu formulario. Quizá sea eso, a ver si hay suerte.
Saludos,
Óscar
http://blogdesap.blogspot.com

So where we see the status of this work order request

Hi All,
I have submitted work order WO00034931 in SAP for a new vendor address but it seems my approver (Andre Vabre) never received it. In SAP, its status is Submitted for Approval.
So where we see the status of this work order request
Thanks,
Kumar

Hi
You can make the price of a variant dependent on the characteristic values assigned (Pricing).You can use
variant conditions to define surcharges and discounts for a variant
Variant u2013Pricing steps
Create condition record
create a procedure where you enter the reference from the characteristic
Assign the procedures to either the characteristic values
configure the material in the sales order
The net price for the material is displayed
If a value that triggers a variant condition is selected when configuring a material in a sales order, the price of the material displayed under Net value is automatically increased or reduced.
In addition, the Conditions pushbutton is displayed.
On pressing this pushbutton,
One can see which conditions have
influenced the price.
I tried to list you as much detail as possible. Hope that you will be able to resolve your issue
Thanks

Set User status collectively in PM order

Hi,
I want to set user status collectively in PM orders. Is there any standard T Code.
Regards
Rakesh Ganpat

Hi,
As mentioned above there are no standard transaction for this and the BADI are available from ECC 6.0 EHP3 only. Either way you will have to do some development.
You could use the FM STATUS_CHANGE_EXTERN to make the user status change one by one. You can incorporate this FM within the above user exit or within you customer Program.
Regards
Narasimhan

ERROR TECO a Plant Maintenance Work Order

Hi Expert,
I create a Plant maintenance work order. With two operation.
Operation 1: Internal maintenance task with standard labor hour. Control Key is PM01.
Operation 2 : Trigger of external PR. With control key PM02.
Now I want to do TECO to settle the Work Order. Whit operation 1 didn't do confirmation. Operation 2 did not do PR next business. The system display a Error message as below:
'ERROR When calculating costs for order XXXX'
How to do analysis?

Hi
in the work order itself from the menu options Extras>Log>Cost determination . and solve the analysis
regards
thyagarajan

User status profiles for work orders and sub-orders

Hi Experts,
I have the following question regarding status profiles for SAP PM work orders (but I guess it relates to all user status profiles).
Customizing
A status profile is defined for order type "PM_A", which contains an authorization key "OP" for certain user states (to be set by the ordering party)
Situation
The ordering party A creates an order of type PM_A for contractor B, and B then creates a sub-order of type PM_A for contractor C
Problem
- If I assign the authorization key "OP" only to roles of party A, then party B can't set the user states reserved for the ordering party (correct for the order A->B, but not for the sub-order B->C)
- If I assign the authorization key "OP" to roles of party A and party B, then B could set certain user states reserved for the ordering party in the order A->B, which is also wrong
Question
Is there a way to restrict sub-orders differently than "non-sub-orders", or do I have to create a "sub-order order-type" for each order type, in order to assign them different status profiles and authorization keys?
Thanks a lot!

hi
since you have 3 roles to be assigned to the same order type with different authorization ,it is better you create an seperate order type for sub order and assign the user status with authorization for B and C
regards
thyagarajan

Problem after change item status procedure in sales orders.

Hello experts,
I have changed item status procedure for sales orders. But now all BDoc with queue name CSA_ORDER_xxxxx remain in state 'Written to qRFC Queue (intermediate state)' and needs to be reprocessed manually.
No problem reprocessing.
Have somebody any idea ?
Best regards
Juan Salom

Hi,
Is your inbound queue un-registered(type U)? Look at trx.
SMQR
and see if it is in un-registered. If yes, select the CSA_ORDER_*** queue and click on
Registration
button.
If this does not help, re-generate your Bdoc services (for Bdoc BUS_TRANS_MSG) using
SMOGGEN
or
using the generation workbench.
Then try the delta once again and observe for queue and Bdoc status in the
SMW01
Hope it helps! Reward if helpful.
Regards,
Sudipta

Revoke TECO Status for CO Production Order SAP R/3 3.1H

Hi All,
We are still on SAP R/3 3.1H
Recently, a user accidentally TECO a CO Production Order and now required to revoke the TECO status. There was a similar case back in 2004 and I posted the issue to SAPOSS but did not get it resolved. At that time I was told that it is not possible to revoke TECO status on 3.1H. Furthermore, I was told that a solution can be provided but it is 'billable' due to the nature of the issue which is not a system bug but more of an operational issue.
On the recent case, the chronicle events are as follow:
1. User A created, released, and created settlement rule for the order. This was done on month end (previous period as suppose to the current period).
2. User A then proceed to do good receipt of the order but 'forgotten' to indicate that it was a complete delivery. This was done on current period but posting & document date is on previous period.
3. Another user, B, try to issue settlement for previous period but failed. System return message saying order delivery is not complete and advice to 'complete technically' the order (error message is misleading).
4. User A then proceed to 'TECO' the order without further checking. Apparently, no period selection for doing this posting; system just take the current date (current period).
5. User B still not able to settle the order on the previous period which it is supposed to settled. Settlement only possible for current period, the period the order was 'TECO'.
The CO Production Order is now 'stuck'; no movement type can done on it, cannot settle on previous period as required. If at all possible, 'TECO' status need to be revoke so that other posting for previous period can be done on the CO Production Order.
Is there anyone out there know a workaround or solution, including ABAB program to revoke 'TECO' status for SAP R/3 3.1H.
Any advice appreciated.
Regards,
Wilson Rotop

Hi,
Again, revoke TECO option not available on SAP R/3 3.1H.
Rgds
WR

DI: Completing a work order

Hi,
I've got a problem after upgrading from SDK 6.2 to SDK 6.5 with setting the status of a work order (WorkOrders-Object):
Function SetWorkOrderComplete(ByVal woCode as Long, ByRef ErrMsg as String)
Dim WO As SAPbobsCOM.WorkOrders, rc as Long, success as Boolean
success = False
On Error GoTo ex
' get the workorder object from current company
Set WO = vComp.GetBusinessObject(oWorkOrders)
If Not WO.GetByKey(woCode) Then
    ErrMsg = "No work order document found with number = " & Format(woNumber)
    GoTo ex
End If
' set the work order = completed
WO.Status = wk_ProductComplete
' update the work order => this fails in most cases!
rc = WO.Update
If rc <> 0 Then
    ' retrieve the error message
    Call vComp.GetLastError(rc, ErrMsg)
    Goto ex
End if
' coming by at this point, everything is ok
success = True
ex:
SetWorkOrderComplete = success
End Function
For materials (bill of materials), which are provided with serial numbers, we got the following error:
"[OIBT] , 'The selected quantity of serial/batch numbers is greater than the quantity in row Id'"
The table OIBT belongs to batch-numbering, but out material is marked for serial-numbering!
Anyone who knows the problem or a solution?
Thanks a lot!

We tried the same process in the SBO-GUI, there it works fine. Since I have started this posting, the problem was escalated to the SAP Development, they confirmed this problem as a known bug and will correct it.
Thank you for your reply.

Setting Workflow status not working in imported workflow from SPD to Visual Studio

Hi all,
I have created SPD workflow and imported in visual studio. When I deploy imported Workflow using visual studio feature I found that Setting Workflow Status action is not working. Do I need to change Set Workflow status activity in Visual studio to make it
work.
Rohit Pasrija

Hi,
According to your post, my understanding is that Setting Workflow status did not work in imported workflow from SharePoint Designer to Visual Studio.
I try to reproduce the issue and the result is the same as yours.
After I import the workflow, choose the .xoml file, the view is as below:
To troubleshooting the issue, I add a new item to the project and select “Sequential Workflow” in the template.
After I click the Tool, I find that there don’t have the “SetCustomWorkflowStatus1” activity.
To set the status of the state, we need to use the “Set State” Activity in the “SharePoint Workflow” toolbar.
That is the reason why the “SetCustomWorkflowStatus1” activity does no work.
More information:
Apply Custom Values to Visual Studio Workflow Statuses
Thanks,
Linda Li
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Linda Li
TechNet Community Support

Production Order TECO status

Hi all
I face this peculiar problem. When I TECO a Production order there sometimes the order reservation for components are not wiped out. Why does this happen only sometimes and if this happens how do I remove the component reservation?
thanks a lot

Hi
Usually when you did not reach the upper or lower limits of the order, reservation ermains open.. so first otion to clean up all reservation linkedto the order is to set TECO status. if it did not clean up all reservation may be caused becuase there are open items in another screen or being handle by another user.
So you can remove the TECO, and TECO the order once again, just ensure there are no other screen using the order or material.
Next option is to delete the reservation directly via MB22. sometimes this option is not possible, normally when Reservations are created automatically by the system, in this case only deleting the source of the reservation.
Final option is to clean only the reservation for a given material, just go to the ordern in change mode, and then to the material details, and set the flag "on" for the field "Final Issue".
Hope this helps.
JC

How to change Work order status ?

Hi,
I am using an ABAP program to change the user status of a work order to "CLOP" , This is like IW32 , Here Which function module I can use to do this ?
Thank you for your help.
Thanks

Hi,
You can use the FM 'STATUS_CHANGE_EXTERN' for updating the user status. and 'STATUS_CHANGE_INTERN for updating the system status.
Hope this solves your problem.
Regards,
Hari

How to reset Work Order System Status -NCMP Not completed

Hi Friends,
Please can anyone guide me how do I reset / revert the NCMP (Not completed) System Status of the Work Order. The System Status comes after I have done the Function of "Do Not Execute".
Thanks in Advance.
Anant

Hi,
1. You cannot reset it back . For future cases ensure to grey out the option using Transaction Variants SHD0 for IW31/IW32 Tcodes
2.Steps to create transaction variant http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/40d1443e-0184-2c10-c68d-c612f771fe6f?quicklink=index&overridelayout=true
3.You can also explore user exit :IWO10026 User check on setting status 'Do not perform'
regards
pushpa

Work order-System status table

Hi,
In which table does the system status of the work order (TECO, Created, Released etc) gets updated? I want to know in which table does all the open work orders get updated.
Thanks in Advance

Dear Jegashree,
Check this link
[Production order status|Table : Production order status;
Regards
Madhu

IAGR DRFT Work Order Status

Hello,
     One of our Suppliers in SNC is having a problem with a Work Order. Right now the Status on the Work Order is IAGR DRFT (In Agreement and Draft). How do I remove the Draft status? As long as the WO is in this status no one can accept it. This is also causing a problem on the ASN for this as it was not confirmed completely, only partially Confirmed on the PO
Thank you for your help,
Jeff Hnatiak

HI JEFF
It is quite interesting in your case
I will the explain the general WO process view, If anything deviates from this, Please explain the step explictly
As customer i create a PO in sap ECC system, Coreesponding PO and WO are created in SNC
ex: 4500017485 and WO OEM0008522
Now In work order configuration as explained in previous msg
I do not check the "publish work orderupon creation and change option"
Then
Log into webui As customer
I would see required action-----Publish changes
WO status: CINE- content in negotiation
WO delivery line status : INEG DRFT-   in negotiation draft
After i pubilsh using save/publish i see status
WO status: CINE- content in negotiation
WO delivery line status : INEG -   in negotiation
Now log in as supplier into webui
I would see required action------respond to proposal
I go and select teh delevery line use action button-select Accept request
Then click adapt work order button (if automatic publish changes is not active, woo1 profile WO_AUTO_ADAPT_CHANGES validation check inactive )
Then i will see status
WO delivery line status : IAGR DRFT-   in AGREEMENT DRAFT
WO status: CINE- content in negotiation
REQUIRED ACTION-----PUBLISH CHANGES
Then i press save/publish buttion-
WO status----
CIAG ---content in agreement
WO delivery line -
IAGR----in agreemetn
THen you can start reporting actual data and ASN etc
Best Regards
Vinod

Problems to set TECO status in PM work orders

Similar Messages

Maybe you are looking for