Problem with formatted search on UDO Form

Hi,
I've created an UDO and in the lines I have the fields ItemCode and ItemName. In the ItemName field I have a formatted search configured the next way:
       -Search by Saved Query
           -QueryName
       -Auto refresh when existing altered column
           -ItemCode
       -Refresh regularly
This formatted search works fine when I do <shift> + F2 in the field. But when I change the field ItemCode and get out of the field it doesn't execute the formatted search.
Any ideas?
Thanks in advance, regards
Vanesa

Hi Vanessa,
Firstly (and I'm not giving lessons on sucking eggs) does this work when run as a query with the $ field replaced with a litteral value that you know exists in the table you're searching (surrounded by single quotes)?
The reason I say this is that I have had a few where as opposed to giving an error I've been hitting shift+f2 with absolutely NO feedback via error messages.
Which form is this within? How have you used the variable element in the query?
Is it possible for you to show the query? Along with details on which form you're using it in?
Hopefully be able to help with more info,
Julian

Similar Messages

Problem With Formatted Search.

Hi to all,
I have linked a formatted search to a UDF that lies at row level in AP Invoice. This field is used to display the Sales Order Price. The requirement is that from SO we create a purchase order and subsequently create a goods receipt and AP invoice.. Now in invoice it is showin perfectly fine whether it is copied from goods receipt or purchase order.. But in the purchase order and goods receipt screen this query will not work. And the same query used in AP invoice is being linked to these documents. Is there any work around for this?? Is it possible to run queries based on the form numbers?? If so ho do i pull the form number in the formatted search query??
Please Help!!!!
Regards
Aris

I recommend creating separate queries for each document.
ie
1 formatted search to lookup price on sales order from AP Invoice
1 formatted search to lookup price on sales order from GRPO
1 formatted search to lookup price on sales order from PO
then change the lookup to pull fields from the document that you are using as a reference.
when you are building the formatted searhes start by returning the values that are you are using as a reference. That way you are sure that you are pulling the correct information.
Then layer in the lookup to the sales order.
If you get stuck I recommend that you copy and paste the formatted search in SQL Server management studio and replace the variables refereces with real values.
In my experience troubleshooting queries is more effective when using SQL Server management studio. (the error reporting is better).

Problem with Formatted Search-Urgent

Hi All, I have a problem as follows:
I am trying to set up a formatted search in the Batches Setup window of GRPO document. I want to pickup the "Total Created" figure from Rows From Document grid (i.e. the upper grid) in the form. I want to add 100 to it and then to display the result in the "Batch Attribute1" Field in the lower grid i.e. Created Batches Grid.
Please someone give me the tested query for the purpose..
Thanks In Advance
Amol Mangalkar

Try the next FS:
SELECT $[$35.38.Number]+100

Problem with formatted search in grid

Hi all,
I have a Grid with 3 columns in my user defind form. In that Grid,I used one one formatted search on column 2 based on the value of column 1.
I mean when i was press 'SHFT+F2' on second column, it will execute the query based on value of what we entered in the first column of the grid. How can i do this?? How can i fetch the value of first column in the formatted search??. Please help me.
Thanx in Advance
Oram.

Hi
write a query like this and assign formatted search on column2
SELECT ITEMNAME FROM OITM T0 WHERE T0.ITEMCODE = $[/$GRIDUID.COL1 UID.ROWNUM])
regards
Vishnu

Problem with ALV search help Dictionary Search Help

Hello experts
I have a problem with ALV search help.
I use DDIC table ZXXX with text table ZXXX_T. I created DDIC search help form table ZXXX. In my WD application, in context on COMPONENTCONTROLLER i set on attribute: 'Input help mode' as 'Dictionary Search Help' and in 'Dictionary Search Help' I pass name of new created DDIC search help.
I create a input field from that atrribute and search help works fine (there was a value and description for value from text table). So I created ALV witch contains that attribute too.
Next I set column for this attribute in ALV as editable but on Serch help for this collumn I have only value. I DON'T HAVE TEXT DESCRIPTION FOR VALUE.
Please help me and tell me what I do wrong?
Miko

Hello,
Thank's for your help. I create DDic Search help for all fields from my ALV. Next I changed 'TYPE' for all ALV fields in COMPONENTCONTROLLER from ZXXX-Zfield to Zfield, and I changed 'Input help mode' from 'Automatic' to 'Dictionary Search Help'. Now I see Value and Description for value in Search Help in my ALV.
Regards
Miko

How can i get totals in columns with formated searches

How can i do this with SDK if it isn´t posible since formated searches

This is not possible with formated searches.
With SDK, depends on if it is Matrix or Grid, on if it is a system form/your own form. But basically, loop throw the form or datasource, and do the sumatory.
Regards,
Ibai Peñ

Formatted search on payment form

Hi Experts!
I would like to make a formatted search on payment forms-both outgoing and incoming- which copies the partnername or the accountname according to the doctype into the journal remarks field.
I've created a query but it doesnt work. It runs error.
SELECT case when $[ORCT.doctype]='A' then $[RCT4.Descrip] else
$[ORCT.Cardname] end
Please, can you help whats wrong with this?
Thank you in advance!

Try this
SELECT CASE WHEN $[ORCT.DocType] = 'C' THEN $[$32.1]
WHEN $[ORCT.DocType] = 'S' THEN $[$32.1]
ELSE $[$71.2] END
Good luck

Application Express 3.1 + BI-Publisher + problem with formating numbers

Hello together!
I use the Oracle BI Publisher Template Builder for Word (10.1.3.4) to generate RTF-Templates. I upload these templates in Oracle Apex (Advanced support-->BI-Publisher/OC4J as print service).
It works well, but I have a problem with formating numbers.
In Template Builder I define following number formats, for example: #.##0 for numbers like 1.454.234 and #.##0,00 for numbers like 54,80
In Template-Builder Preview it looks well.
But whatever I do, in use with Oracle Apex dots and comma are allready interchances in the printout.
That means,
1.454.234 become 1,454,234 in PDF-Report
54,80 become 54.80 in PDF-Report
Other than that, the layout is exactly the same like in Template Builder defined.
What's wrong?
Do I have to change any country parameter?
Juliane

I also had the same problem. I tried with normal formating of 99g99g999d99 instead of ##,##,##0.00 and it has resulted correct way.

Problem with Consolas font in a form

I have problem with Consolas font in a form in latest Adobe Reader (v11.0.9)
It shows dots (password sign) instead of letters. Edit box is not configured for passwords.
Form was created by Foxit PhantomPDF and it shows correctly in Foxit.
Can somebody check PDF for errors or warnings?
http://www60.zippyshare.com/v/71759184/file.html

You should embed these fonts in the document.
If you need more help with this, please ask in the Acrobat forum.

Proxy problem with Yahoo search returned links

We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3 that works well. A replacement that I have had up but not currently using much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with Yahoo search results. If I point a workstation to the older NW6 BM it works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM then it will work fine in Bing and Google but in Yahoo it will return the results but when you click on any link there I get this message:
Yahoo!
Yahoo! - Help
The requested URL was not found on this server.
Please check the URL for proper spelling and capitalization. If you're having trouble locating a destination on Yahoo!, try visiting the Yahoo! home page or look through a list of Yahoo!'s online services. Also, you may find what you're looking for if you try searching below.
Any ideas? I have no access rules enforced. Anything that might be of help would be greatly appreciated.....Thank you!

On 03/10/2014 09:56 PM, jpeteet wrote:
>
> Mysterious;2310138 Wrote:
>> On 03/07/2014 09:06 PM, jpeteet wrote:
>>>
>>> We have two BM servers here. Older one Netware 6 sp5 w/ BM 3.7 sp3
>> that
>>> works well. A replacement that I have had up but not currently using
>>> much Netware 6.5 SP8 w/ BM 3.8 sp5. The latter one has a problem with
>>> Yahoo search results. If I point a workstation to the older NW6 BM it
>>> works fine in Bing, Google & Yahoo. If I point it to the NW6.5 BM
>> then
>>> it will work fine in Bing and Google but in Yahoo it will return the
>>> results but when you click on any link there I get this message:
>>>
>>>
>>> Yahoo!
>>> Yahoo! - Help
>>>
>>>
>>> The requested URL was not found on this server.
>>>
>>> Please check the URL for proper spelling and capitalization. If
>> you're
>>> having trouble locating a destination on Yahoo!, try visiting the
>> Yahoo!
>>> home page or look through a list of Yahoo!'s online services. Also,
>> you
>>> may find what you're looking for if you try searching below.
>>>
>>>
>>> Any ideas? I have no access rules enforced. Anything that might be of
>>> help would be greatly appreciated.....Thank you!
>>>
>>>
>>
>> 1. Verify that you use the same proxy.cfg on both servers and the same
>> settings like persistent connections.
>> 2. Take a lan trace on the 3.7 when hitting the yahoo url and a lan
>> trace on the 3.8 doing the same action and compare the differences.
>
> I am still trying to make sense of the Wireshark output. I can see where
> I get the HTTP/1.0 403 Forbidden. What is happening upon further
> inspection is when I click on a link returned from a yahoo search it
> actually takes me to a link that always starts
> "http://r.search.yahoo.com/.......blah blah blah. But If I go to the
> newly opened tab (in IE) and add 's' to the HTTP address and hit enter
> - the link works. Maybe that will help. This happens whether or not I
> have "enforce access rules" checked.....
>
>
1. Verify that you use the same proxy.cfg on both servers and the same
settings like persistent connections.
2. Compare both traces, the working one and the non working one. See if
the returned link from yahoo is the same on both traces and it is coming
from the same server. You may have another firewall/router up in the
path causing the issue.
3. Before taking the lan traces on the netware server using pktscan.nlm,
unload proxy, load proxy -cc to clear cache. Then take the traces and
see at what point the non working one differs from the working one.
check that info is coming from the same up server

Read item code from Sales Order with formatted search

hi,
i'm tring to read tha values of the item or items of a sales order (before save it) with a formatted search.
i have no problem to read the value of card code or cardname but i can't read the item's value.
i tried with this [code]Select $[RDR1.ItemCode][/code] (i found it on the forum) but it doesn't work.
somebody can help me ?
thank you

Hi, Alessandro!
I think the trouble is that you are trying to assign a FS to the header of the document. You are getting the information of the current row, so you have to bind a formatted search to some column of the "table - part" of the document.
And also you can try:
SELECT $[$38.1]
38 - the value of "Item" (when you point a mouse to the cell, information you want from)
1 - the value of "Column" (the same...)
It will get an info of this cell in a current row.
HTH!

Help with Formatted search involving a UDF

I have a Formatted search which runns the following code:
exec xsp_nssItemLookup $[$38.256.0]
This search is on a udf of the Purchase order screen. (256 is the item details field in the details.
The above query runs fine. What I really want to do is to pass the contents of another UDF to the stored procedure. The USF is called U_NSSItemID. If I change my stored procedure to read:
exec xsp_nssItemLookup $[$38.U_NSSItemID.0] however it does not work. I get blank results every time.
I have also tried exec xsp_nssItemLookup $[POR1.U_NSSItemID.0] which doesn't work either.
I can't figure out what is wrong with my syntax. I don't get any errors, just a blank value.
Thanks
don shields

Suda,
Thanks for answering so quickly. To answer your question the data type is Alphanumber which I just figured out is the save as CHAR() in SQL. My problem turned out to be that I needed to trim the spaces from my parameter. I was getting values like "cover ", and I needted to get "cover". Problem solved now.
Don

Trigger Formatted Search on Freight Form

Has anyone gotten a formatted serch to fire on the Sales Order - Freight form based on the document total changing in the main Sales Order form?
Scenario - we set the Freight to a fixed amount $50.00. If the document total goes over $500 then we want to set Freight=$0.00 using a formatted search (i.e. shipping is free when the order is above a certain amount).
In troubleshooting I tried to use SELECT $[$29.0.0] and also tried SELECT $[$-29.0.0] to see if the FMS could even return the Document Total on the freight form but it doesn't seem to be linked.
Anyone gotten this to work?
-Frank

I already tried using
SELECT $[$29.0.Number]
Results in Internal error 3006.
I also tried setting the FMS to SELECT '0.00' with Auto Refresh enabled on When Field Changes = Document Total just to see if the FMS would fire when the main Sales Order total changed. FMS would not fire.
Appears to me that the freight form is in some way disconnected from the main Sales Order form as it relates to FMS.
Anyone gotten this to work outside of going to SDK?

Problem in formatted search runing by code

Hi all, this is my problem:
I have a one formatted search in one column and i want run it in lost focus of other column. In the forun appear this code to do but something wrong occurs in my case. The formatted search seems run and in one moment the resul value appear in the matrix but in the moment dissapear and the old value remains. Why the formatted search result dissapear?
this is my code:
if (pVal.EventType == SAPbouiCOM.BoEventTypes.et_LOST_FOCUS && pVal.ItemUID == "38" && pVal.Before_Action == false && pVal.ColUID == "U_n_formato"&&KEYDOWN_NUMERO_FORMATOS)
                oForm = SBO_Application.Forms.GetFormByTypeAndCount(pVal.FormType, pVal.FormTypeCount);
                oMatrix = (SAPbouiCOM.Matrix)oForm.Items.Item("38").Specific;
                try
                    oMatrix.Columns.Item("11").Cells.Item(pVal.Row).Click(SAPbouiCOM.BoCellClickType.ct_Regular,0);
                    SBO_Application.SendKeys("+{F2}");
                catch
                //oItem.Click(SAPbouiCOM.BoCellClickType.ct_Regular);
                KEYDOWN_NUMERO_FORMATOS = false;
Thank you all again.
Regards.

Hi
you can set the true value to KEYDOWN_NUMERO_FORMATOS = true.
in Got focus event of column uid "U_n_formato"
regards
senthil

Get matrix row data and put it into header field with formatted search ???

Hi All,
I ask your help concerning the following:
On an invoice matrix I want to check all Itemgroup Codes of all items in the rows, if there are some rows' items with ItemGroupcode 101 and some others with anything else, then header field should be Y, otherwise N.
My main problem is: how do I put a matrix row data to a header data with checking all rows in the matrix?
A minor problem is that I can't get the formatted search to work on all rows when the formatted search is assigned to the user field in header.
If I put the formatted search to a row field then the row field is filled with the proper value, but the same query assigned to the user field in header works only on the first row.
What am I doing wrong?
SELECT USEDPROD= CASE T0.ItmsGrpCod WHEN 101 THEN Y ELSE N END FROM .[OITM] T0 WHERE T0.ItemCode = $[$38.1.0]
(SBO 7.6)
Any suggestions are welcome.
Thanks.
Bálint

Dear Adele,
Thanks for the answer. The major one cannot be solved. OK, I'll try to get a workaround.
However I still do not understand why my query does not work in all selected rows, just in the first row, i.e. if I assign the query to a header field and I'm positioned in the first row it's OK, but when I add a new item to the second row or any of the next rows, the header field is not updated at all.
Why is that so? Do you have any idea?
Bálint

Problem with formatted search on UDO Form

Similar Messages

Maybe you are looking for