Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Hi all,
I'm trying to install Oracle Development Suite 10.1.2.3.0 on Windows 7 (Service Pack 1 with fairly current Windows Updates) according to Metalink Document 1292919.1.
Everything work just find until I try to install the 10.1.2.3.0 Patchset (Patch Number 5983622) as outlined in Step 5 of the aforementioned Document.
During the step labelled "Copying files for 'Oracle Universal Installer 10.1.0.6.0" I get the following error message twice:
"javaw.exe Entry Point Not Found"
"The procedure entry point GetProcessImageFileNameW could not be located in the dynamic link library PSAPI.DLL".
I acknowledged both of these messages and rest of the installation process runs fine.
I'm not not sure about what to make of these messages, will my installation work correctly or will I have to cope with further issues related to this?
My search on Metalink did not turn up any results related to the Development Suite. I already checked if there were multiple versions of psapi.dll were present on the system as mentionned in Documents regarding this problem while installing Oracle client 10.1.0.5.0 but there is only one.
Any help is apreciated!
Chris

Hi Chris,
Answer to the question is provided on threads:
Install errors - Entry point not located in PSAPI.dll; Package load failure
PSAPI.DLL installation error
Hope this answers your question
Thanks &
Best Regards,

Similar Messages

Problem Installing Developer Suite on WIndows Vista

Hi! i'm a student of computer science, and i need to install developer suite for a proyect i need to do for one of my classes.
I have a problem installing developer suit on Windows Vista. After i download and unzip both disk, i run the setup from the installer folder and i get an alert that says: "abnormal termination. There's been an internal error. Send the following files to the Oracle Suport Services: Unknown, Unknow, Unknow". I've also tryed with the setup from the main folder and i get the same alert. I don't know what to do, i've tryed setting the compatibility mode to windows XP, runnig as administrator, changing the performance configuration of my computer and nothing. Please help me to install the program!

Which developer suite are you using???

How to install developer suite on windows vista

trying to install the dveloper suite on windows vista, keep gettting error that the pagefile(swap file) size is 0 and need to fix this problem.
did any one have this problem
using developer suite x86-101202 (compatibility mode xp sp2)

Have you followed the steps under "III. After the install completed" in this thread?
Forms 10g installed and running on Windows Vista
And note the fourth paragraph from the top. There is a BIG bug in Forms Builder 10g running on Vista. When you try to compile a program unit (procedure) that calls another one that has compiler errors, the Forms Builder crashes. So it can be pretty frustrating if you actually try do any forms development work.

Connectivity and Installation Problem in Developer suite 10g

Please help me solve this problem since I am beginner to Oracle 10g database and Developer suite 10g.
1. I have loaded successfully Oracle 10g database on my server with windows OS 2003 having IIS option selected and configured as my Domain server.
2. I have loaded Developer suite 10g complete in another PC with windows XP. I am able to connect to the database and also OC4J is started and Run form in test mode also works. Also I have developed some forms using developer suite and I am able to run the fmx runtime form in this computer.
3.Now my problem is I have a local LAN and at present there is no internet or web site for this company but they want to work in lan and all departments want to access the data from the server.(Later on when they get a website at that time they want to deploy the forms to the web)
4.Please tell me how and where I will store my fmx file. If I have to save it in the server then how will the clients access it.
5. How to install the developer 10g runtime only in client PC's (OS windows xp) since there is no option in the CD to select the installation like previous releases like D2k.
6. There is no middle tier in this case. Only One server as domain
and client pcs.
Please guide me,matter urgent.
Thanks in advance

Regarding this point -
1.
Then you should be able, for testing purposes, to do the same from other Clients.
Then I have to install developer suite 10g in client pc's but the runtime option selection is not available in the CD. How to proceed?
2.
For production environment, as already said, you should install some Application server. If you only need Forms and Reports you can install the standalone version Forms&Reports services, without infrastructure.
This means I have to install the standalone version Forms&Reports services in the same server where I have installed 10g database and this also being a domain server.
(We do not have sufficent computers where one can use it as application server). Hence only one server with OS windows 2003 and 5 computers with windows xp is available).
Please explain the steps to proceed .
thank you

Cannot install developer suite

Hello,
I have Oracle 10g installed at my PC. This installation was done successfully. Yesterday I downloaded the developer suite 10g because I want to write some GUI with forms. When I start the universal installer and in the dialog box (specify paths - something like that) I push on the button next but nothing happens. Can someone help me with this problem so I can install developer suite on my PC.

Specify a new home and path before pushing the Next button.

Installing developer suite on ubuntu 8.04

Hi,
I'm using Ubuntu since a couple of months now and i'am very happy of it.
I want to install developer suite 10gr2 on ubuntu. Of course I can do that with an xp virtualization.
But as the XE database is also available for ubuntu, with explanations for installation http://www.oracle.com/technology/tech/linux/install/xe-on-kubuntu.html I want to do the same with forms builder.
Is there a tutorial for that ? is it even possible?
Thanks for sharing your experience.
Regards
Jean-Yves

HI,
According to the certification matrix
https://metalink.oracle.com/metalink/plsql/f?p=140:1:9614243620221198550:::::
the Linux Ubuntu does not seem to be certified with DevSuite10g....
Sim

Install developer suite 10g on windows 7

hi to all,
I would like to install developer suite 10g on my notebook windows7 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

Problem installing Creative Suite 5.5 Premium trial

Problem installing Creative Suite 5.5 Premium trial: I get an error messages that says "The following disk images couldn't be opened ... image:Design Premium_CS5_5 ... reason:Invalid checksum. What am I doing wrong? Thanks, Sara

Try uninstall all Adobe software from the PC before installing CS 5.5, then reinstall them back again after you installed CS 5.5.
Refer to:
http://voyager8.blogspot.com/2012/03/trick-of-installing-all-software-in.html

How to install developer Suite 10g on linux 9

i am trying to install developer suite 10g on linux 9 ... but i am unable to it.please suggest

Hi,
Intalling developer 6i in Linux is not difficult, but I bet that you won't be much impressed by the graphics. Download the software, extract it and then run ./runInstaller from user Oracle (after giving it permissions), and thats it.
regards

To install developer suite 10g wondows2003

hi to all,
I would like to install developer suite 10g on my notebook windows2003 32-bit. It 's possible?
thanks
Silvia

Silvia,
Yes, it is possible to run Oracle Forms 10g R2 on Windows 7, although, it is not officially supported by Oracle. Oracle has only certified Forms 11g (Oracle Fusion Middleware (OFM) 11g) for Windows 7. If your development requires a supported Oracle environment, then I suggest you upgrade to OFM.
The key to setting up Forms 10g on Windows 7 is the preparation. First, the Oracle Installer doesn't recognize Windows managed virtual memory so you will need to change your system virtual memory settings from "Windows Managed" to a specific size (typically 2048mb minimum). Second, you will need to change the compatibility to "Windows XP" for the Forms 10g installer and run the installer as "Administrator" for the installation to succeed.
Hope this helps,
Craig B-)
If someone's response is helpful or correct, please mark it accordingly.

10.1.2.3 Developer Suite patch problem

I've successfully updated our server with patch 10.1.2.3. I'm now trying to update my windows xp workstation that has Developer Suite Version 10.1.2.0.2. Every time I try to install the patch an error displays telling me the following: "The following running services need to be shut down before continuing". The thing is it is listing about 40 items and some of them don't make sense. The following is just a few from the list:
COM+ Event System
Remote Registry
PmI Driver HPZ12
Themes
Windows Audio
Windows Time
These are just a few of about 40. Any suggestions?
Thanks,
Whitney

I've come across this problem a number of times when using Oracle's universal installer on a machine that already had an old Oracle install. I always got around it by finding the file oci.dll in the old Oracle install and renaming it to e.g. oci.dll_old, and restarting the PC. The new install would then work fine, without any complaint about services.
I'm not sure if this is appropriate in this case, though, as you're patching rather than replacing an existing install.
James

Problem to install Developer Suite...

Hi,
I bought six months ago the Oracle product to put it in my PC. Today I tried to load the Oracle9i Developer Suite (I would like to see the Procedure Builder to know it for the 1Z0-147 exam....) but I received a message because my version of Developer Suite (9.0.2.0.1) is to old than my version of Oracle (9.2.0.1.0).
Do you know where I can dowload the good version (And wich one is good) or need I to contact Oracle to receive a new CD (I tried to send mail tree times, but no response....)?
Thank you for your response.
Eric

The Database version should not matter just make sure that you install iDS into it's own Oracle Home directory - not in to the Database Oracle home.
You can get the latest patches for iDS from metalink.oracle.com if you have a support contract.

Frm-92100 on windows vista after install Developer Suit 10.1.2.02

Hello everybody,
I installed success Developer Suit 10.1.2.02 on windows vista.
But when I tried to run a test form on web browser after .jar is load
A message appears.
FRM-92100: Your connection to the server was interrupted. This may be the result of a network error, or a failure on the server. You will need to re-establish your session.
Details...
Java Exception:
java.lang.StringIndexOutOfBoundsException: String Index out of range: -1
When I check the log file.
….forms90web: Stopped
….Stopped (Shutdown executed by jazn.com/admin from 127.0.0.1 (127.0.0.1))
This is a critical problem to me.
Please, help me urgent.
Regards.
William.

Thanks Sqaimes
But, I don’t know that’s the solution, anyway can you tell me if you know what’s the patch?
Regards,
William
Message was edited by:
william

Cannot connect to Database after install Developer Suite

Help..
I installed Oracle Database and everything seems work properly. I can connect to the database. (system/oracle@orcl)
well, but after I install the developer suite, I can't connect to the database anymore.
I did check the services and both OracleOraDb10g_home1TNSListener and OracleServiceORCL are started.
I try to search help from google but I cannot solve the problem by myself. I also include two ora file below,
tnsnames.ora
=====
# tnsnames.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.ora
# Generated by Oracle configuration tools.
ORCL =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = orcl)
EXTPROC_CONNECTION_DATA =
(DESCRIPTION =
(ADDRESS_LIST =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(CONNECT_DATA =
(SID = PLSExtProc)
(PRESENTATION = RO)
====
listener.ora
===
# listener.ora Network Configuration File: C:\oracle\product\10.2.0\db_1\network\admin\listener.ora
# Generated by Oracle configuration tools.
SID_LIST_LISTENER =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtProc)
(ORACLE_HOME = C:\oracle\product\10.2.0\db_1)
(PROGRAM = extproc)
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
====
everything seems should working properly but I still have problem cannot connect to the database. SQLPlus says "ORA-12154" and "ORA-12514"
please help me.. I need to finish my project within next 2 weeks or I have to study one more year. T_T

Hi ...
The Oracle Doc points out as actions in this type of error:
- If you are using local naming (TNSNAMES.ORA file):
- Make sure that "TNSNAMES" is listed as one of the values of the NAMES.DIRECTORY_PATH parameter in the Oracle Net profile (SQLNET.ORA)
- Verify that a TNSNAMES.ORA file exists and is in the proper directory and is accessible.
- Check that the net service name used as the connect identifier exists in the TNSNAMES.ORA file.
- Make sure there are no syntax errors anywhere in the TNSNAMES.ORA file. Look for unmatched parentheses or stray characters. Errors in a TNSNAMES.ORA file may make it unusable.
- If you are using directory naming:
- Verify that "LDAP" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Verify that the LDAP directory server is up and that it is accessible.
- Verify that the net service name or database name used as the connect identifier is configured in the directory.
- Verify that the default context being used is correct by specifying a fully qualified net service name or a full LDAP DN as the connect identifier
- If you are using easy connect naming:
- Verify that "EZCONNECT" is listed as one of the values of the NAMES.DIRETORY_PATH parameter in the Oracle Net profile (SQLNET.ORA).
- Make sure the host, port and service name specified are correct.
- Try enclosing the connect identifier in quote marks. See the Oracle Net Services Administrators Guide or the Oracle operating system specific guide for more information on naming.According to the above and my LISTENER settings in listener.ora file which is...
LISTENER =
(DESCRIPTION_LIST =
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
    (DESCRIPTION =
      (ADDRESS = (PROTOCOL = TCP)(HOST = myhost)(PORT = 1521))
)there is one ')' missing closing parenthesis....
So , modify your LISTENER settings ... according to the below....The difference is the ')' in bold....
LISTENER =
(DESCRIPTION_LIST =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = IPC)(KEY = EXTPROC1))
(ADDRESS = (PROTOCOL = TCP)(HOST = localhost)(PORT = 1521))
Can you connect now.....????
Regards,
Simon

Installing Developer Suite 10g R2 on Windows Vista failed !!

It seems Oracle has a new challenge of producing a new edition of Developer Suite that will install on Windows newest falvour, Vista. I installed Oracle db 11g on my Vista O.S. and everything runs normally. But my Developer Suite 10g R2 failed to launch setup.exe, giving me the following error:
Checking installer requirements...
Checking operating system version: must be 5.0, 5.1 or 5.2. Actual 6.0
Failed <<<<
Exiting Oracle Universal Installer, log for this session can be found at C:\Program Files\Oracle\Inventory\logs\installActions2007-11-16_06-40-54PM.log
Please press Enter to exit...
Any idea to solve the problem? Or it's all that I have to wait Oracle for an 11g Developer Suite version that is supported by Vista??!
Thanks!

Either your tnsnames.ora file that Forms is using is not set up properly to connect to your database, or else you need to install the Microsoft Loopback Adapter.
I have set up laptops with a Loopback Adapter, so Forms will connect regardless of the Windows computer name. If the computer name is included in the tnsnames entry for your on-board database, then you probably don't need it.
When you installed the 11g database, the installation set up a tnsnames.ora file with an entry for that database. First, try copying the entry into the corresponding tnsnames.ora file used by Forms.
In my system, I have four distinct tnsnames.ora files, each one is a duplicate of the others. Whenever I need to change an entry, I do it in one of them, then do a Save As three times to replace the other three. I use these comment lines at the top of the file to help me:
#-- For reference, save as: C:\oracle\tnsnames___ref.ora
#-- For Forms6i,   save as: C:\oracle\orant\NET80\admin\tnsnames.ora
#-- For Forms10,   save as: C:\oracle\DevSuiteHome_1\network\admin\tnsnames.ora
#-- For SQL Plus10,save as: C:\oracle\product\10.2.0\db_1\network\admin\tnsnames.oraWithin the laptop running withOUT the loopback adapter, this is the entry for the on-board Oracle 10 database:
#-- Laptop           Could use: (HOST = Steve-PC) / 127.0.0.1
ORCL =          (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)
                                  (HOST = 127.0.0.1)
                                  (PORT = 1521))
(CONNECT_DATA = (SERVER = DEDICATED)
                          (SERVICE_NAME = orcl) ) )Note the replacement of the HOST entry from the Windows computer name with the generic IP address for the local platform.

Problems installing Development Suite Patch 10.1.2.3.0 on Windows 7 (32-bit)

Similar Messages

Maybe you are looking for