Problems with Print Preview in PO.

Hi Experts, I need your help!!
I have problems with print preview in purchase order, if the PO has moviments ( GR or Invoice ) I cant see the form of PO in Print Preview...Anybody has idea about happen?
I can see the form before i make the movements after i cant see anymore..This is right?
There is the document explain the problem
[http://www.easy-share.com/1903543233/PO_PROBLEM1.doc]
Thanks

Hi,
What is the particular error message which prevented you from print preview? I have not seen such case before in many systems.
Cheers,
HT

Similar Messages

I had a problem with print preview of billing document.

HI all,
I had a problem with print preview of billing document which contains two output types ZR1 ZR2..
For the footer text of billing document I maintained the font size as 7,5 pts, But when i go for print preview from output type ZR1 the font size of footer text is very small and looks good for output type ZR2.
If i change the print options-->logical destination of output type ZR1 same as Output type ZR2, the footer text looks good.
I think there is some issue with logical destination in print options for the output type ZR1, how can i resolve it.

hi,
for both the output types , r u using same sapscript or smartform?
if yes then, u can control it in output options of smartform and also in sapscript , you can control through if condition.
and if differect sapscript or smartform then you should not get such problem.
you can check the sapscript or smartfrom in TNAPR table.

Problem with Print Preview and Print events

Hello Experts,
We have developed a program, in which, I m trying to display the % values in the Sub Totals and Grand Total lines, The logic and program functionality is performing very well. The report is displaying the output the way end user is willing to see.
The main problem is, the entire % values are going to a toss when we click the Print Preview or trying to print the report, which is not supposed to go that way. I have even tried to debug the program where the problem is evolving in the code, but it is not raised from the code.
Please refer to the screen shots.Before clicking the Print Preview and after clicking the print preview.
Do anybody face the same kind of problem ever?
If so please let me know what could be the best possible solution.
Thanks & Regards
Harish Kumar MK

Hi Harish,
I have use the below code but not for percentage... I think for percentage you just have to calculate the normal percentage and replace it with a subtotal value.
This is not your complete code it will be better if you mail your complete code so that i can debug and check.
   TABLES: vbak.
TYPE-POOLS: slis.                      " ALV Global types
SELECT-OPTIONS :
s_vkorg FOR vbak-vkorg,              " Sales organization
s_kunnr FOR vbak-kunnr,              " Sold-to party
s_vbeln FOR vbak-vbeln.              " Sales document
SELECTION-SCREEN :
SKIP, BEGIN OF LINE,COMMENT 5(27) v_1 FOR FIELD p_max.
PARAMETERS p_max(2) TYPE n DEFAULT '20' OBLIGATORY.
SELECTION-SCREEN END OF LINE.
DATA:
BEGIN OF gt_vbak OCCURS 0,
    vkorg LIKE vbak-vkorg,             " Sales organization
    kunnr LIKE vbak-kunnr,             " Sold-to party
    vbeln LIKE vbak-vbeln,             " Sales document
    netwr LIKE vbak-netwr,             " Net Value of the Sales Order
    waerk LIKE vbak-waerk,             " Document currency
END OF gt_vbak.
INITIALIZATION.
v_1 = 'Maximum of records to read'.
START-OF-SELECTION.
PERFORM f_read_data.
PERFORM f_display_data.
*      Form f_read_data
FORM f_read_data.
SELECT * INTO CORRESPONDING FIELDS OF TABLE gt_vbak
           FROM vbak
             UP TO p_max ROWS
          WHERE kunnr IN s_kunnr
            AND vbeln IN s_vbeln
            AND vkorg IN s_vkorg.
ENDFORM.                               " F_READ_DATA
*      Form f_display_data
FORM f_display_data.
DEFINE m_fieldcat.
    add 1 to ls_fieldcat-col_pos.
    ls_fieldcat-fieldname   = &1.
    ls_fieldcat-ref_tabname = 'VBAK'.
    ls_fieldcat-do_sum      = &2.
    ls_fieldcat-cfieldname = &3.
    append ls_fieldcat to lt_fieldcat.
END-OF-DEFINITION.
DEFINE m_sort.
    add 1 to ls_sort-spos.
    ls_sort-fieldname = &1.
    ls_sort-up        = 'X'.
    ls_sort-subtot    = &2.
    append ls_sort to lt_sort.
END-OF-DEFINITION.
DATA:
    ls_fieldcat TYPE slis_fieldcat_alv,
    lt_fieldcat TYPE slis_t_fieldcat_alv,
    lt_sort     TYPE slis_t_sortinfo_alv,
    ls_sort     TYPE slis_sortinfo_alv,
    ls_layout   TYPE slis_layout_alv.
m_fieldcat 'VKORG' '' ''.
m_fieldcat 'KUNNR' '' ''.
m_fieldcat 'VBELN' '' ''.
m_fieldcat 'NETWR' 'X' 'WAERK'.
m_fieldcat 'WAERK' '' ''.
m_sort 'VKORG' 'X'.                  " Sort by vkorg and subtotal
m_sort 'KUNNR' 'X'.                  " Sort by kunnr and subtotal
m_sort 'VBELN' ''.                   " Sort by vbeln
ls_layout-cell_merge = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      is_layout   = ls_layout
      it_fieldcat = lt_fieldcat
      it_sort     = lt_sort
    TABLES
      t_outtab    = gt_vbak.
ENDFORM.                               " F_DISPLAY_DATA
BR
Sumeet

Problem with Print Preview Urgent!

Hello BW Experts,
1.I am trying to use the Print functionality for web printing.In the print preveiew i see all the text in black and white.It is completely different from the page that is displayed in the browser.
--I tried using the same print stylesheet but it does not work.
2.In the print preview how do i change the default header line height to some other value.
3.If i select file>print preview in internet explorer it is treating the logo as a different page,so the logo is printing in seperate page followed by the text.
I appreciate all your help.
Thank you all!
Raj

Thanks deepak for the reply.
I am using the stylesheet and media = print but i still have the problem.
This is the javascript function i am using
<head>
<link href="/sap/bw/Mime/BCT/StyleSheets/ServicePortalBWReports.css" type="text/css" rel="stylesheet"/>
<script>
<script language=javascript>
function callPrintHelpService(parameter, cell_type, filter, parameter1, parameter2, item, dataprovider, x, y) {
var print_service = "Z_PRINT_HELP_SERVICE"

SAP_BW_URL_Get();
if( dataprovider == "DP") window.open(url, "Print", "width=800, height=600, menubar=yes, toolbar=no, scrollbars=yes, resizable=yes"); }
</script>

<title>
<object>
         <param name="OWNER" value="SAP_BW"/>
         <param name="CMD" value="GET_ITEM"/>
         <param name="NAME" value="TITLE"/>
         <param name="ITEM_CLASS" value="CL_RSR_WWW_ITEM_TEXT_ELEMENTS"/>
         <param name="DATA_PROVIDER" value="DP"/>
         <param name="GENERATE_CAPTION" value=""/>
         <param name="ELEMENT_TYPE_1" value="COMMON"/>
         <param name="ELEMENT_NAME_1" value="REPTXTLG"/>
         <param name="ONLY_VALUES" value="X"/>
         <param name="ELEMENT_NAME" value="REPTXTLG"/>
         ITEM:            TITLE
</object>
</title>
      <link href="/sap/bw/Mime/BEx/StyleSheets/ServicePortalBWReports.css" type="text/css" rel="stylesheet" media="print"/>
</head>
1.---can you please be more specific where i need to change the default header height value.
2.In the print preview of the report it looks fine but when i say file>print preview from internet explorer it is considering the logo as seperate page .Do i need to make any settings somewhere.
3.In the print preview it remains same eventhough i use the same stylesheet as that of the report.
Please advice.
Thank you,
Raja

Problem with print preview in alv grid

Hello all,
I have to display base unit of measure(meins) in alv grid output. i am using a conversion routine to convert it from ST TO PC before display.After executing the report i am getting the correct data. the problem is when i select the print preview
alv list is displayed. in that the unit of measure pc is not displayed, it is comming as '*******. what i came to know is the same conversion routine is triggered in the standard program for the display. so it canot convert that.
so please help me out in solving this.
Thanks in advance,
Sarat

hi sarath,
this is an example code try using the statement before displaying, i think it works.
*example cdoe.
LOOP AT i_grp1 INTO wa_grp1.
AT NEW tknum.
READ TABLE i_grp1 intto wa_grp1 index sy-tabix.
SUM.
MOVE-CORRESPONDING wa_grp1 TO wa_grp2.
APPEND wa_grp2 TO i_grp2.
ENDAT.
ENDLOOP.

Problem with print preview dialog action in CS4

I have a automation plugin for Photoshop that print a image playing a Photoshop print preview dialog.
The script works on CS3 but not in CS4. There is some specific platform tags (Mac uses 'keyPrintSettings' and 'keyPageFormat' that are OpaqueStructPtr and it's not possible to take the size, and Windows uses 'keySystemInfo' and there is no information about this data) and it's not possible to ignore.
I attach a sample functions for CS3 (working) and CS4 (not working).
Some one have information about this problem?

Hi, try to implement the note 1116359.
reward if usefull.

Problem with printing-- logo comes upside down

Hi ,
We have some problem with printing.
While testing the print output for billing we are experiencing some problems. Every thing in the layout looks fine in the print preview but when i take a print out in my local printer , i see the client logo comes upside down and some lines are missing .
Can some body suggest me how to correct the same.
Regards,
Sekhar.

Hi Michael,
Thanks....
We have checked the printer earlier also and seems to be fine.
Aditional info:
1) We are getting this problem while printing Billing from "VF01" transaction.
2) In this also we have two invoice numbers given by functional guy out of which in for one we are getting the problem that "lines of the first box are not printing" and for second "logo is coming inverted & lines of the first box are not printing"
Regards,
Sekhar.

Problem in print preview

Hi all,
I am working on sap scripts. i have problem in print preview,
1. I have 2 pages in my layout ,but only one page is displyed in the preview, iam able to view 2 pages in other test program , i have compared all the atrubutes with test program , it's same for both.
2. Iam getting border lines for all the windows on the layout which i don't want on the page, when printed
It would be appreciated if anybody could give me suggestion or sollution.
Regards,
Sre.
Title Edited by: Alvaro Tejada Galindo on Jan 11, 2008 4:13 PM

Hi sayak,
Thanks for your reply, I have followed as u suggested but it's not working. still iam getting only single page .
I think in the second page we give next page as the same i.e page2 as if there is no other page after page2.
please suggest me in other way.
Regards,
Sre.

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

I am having problems with the Preview application. When I try to use it to open a pdf document it gets hung-up and I have to select force quit to close it. Any ideas on how to resolve this problem? Thanks for any help

Can you open the Preview program without loading a file, like by itself?
If it doesn't load then I suspect a corrupt Preview preference file.
Deleting the System Preference or other .plist file
Can you open other files with Preview, like jpg's and images?
How about other PDFs? or is it just that one you have downloaded?
Run through this list of fixes
Step by Step to fix your Mac

HP Officejet Pro 8600 "Problem with Printer or Ink System'

A gander at this forum suggests I am one ofa multitude of people perplexed by this issue. There is a notation beside one enquiry which says 'Problem Solved'.... well it isn't for me. My printer (typical!) is one month out of warranty. I had to replace the black cartridge and, when I did, it came up with this error prompt. I then replaced all the other cartridges. HP suggests removing the printhead and following that they say place it 'upside down on a clean sheet of paper'... NO instructions for cleaning it!! When it is replaced in the printer they suggest you 'rock the printhead left and right to make sure that the printhead fully seats in the carriage' and if THIS doesn't fix things 'try reseating the printhead up to 3 times'... This in itself is an admission of an 'issue' with this product. It doesn't sound like a very scientific engineering 'fix' to me!
A new printhead costs almost what we paid for the printer a year ago. I hate consigning anything to landfill that I can avoid... unfortunately it looks like that is where this unit belongs...

Hi @Robin_Perth,
Welcome to the HP Forums!
I am sorry to hear about you getting the problem with printer or ink system error, with your HP Officejet 8600, but I am happy to look into this for you!
I am assuming you have already been through this guide, A 'Problem with Ink System' Error Message Displays on the Control Panel or Computer During Setup.
If this guide does not resolve the issue, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region. Country-language selector.
This guide, Limited Warranty for HP Ink Cartridges and Customer-Replaceable Printheads for HP Inkjet Supplies, will help you to determine if your printhead is still in warranty or not.
Hope this helps!
RnRMusicMan
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos Thumbs Up" to say “Thanks” for helping!

HP 4622 All in One Printer: Problem with Printer or Ink System

Problem with Printer or Ink System Error OXC19a0027.

charleshia wrote:
Thanks so much for replying to my post. I tried the fist suggestions and they did not work. So, I attempted to move on Dow to the cleaning of my printer. I am the the first to admit that I'm not the genius when it come to electronics buys, my printer do not seem to have what is described in the photos. I'd like to upload a photo of my ink cartage but do not know how.
Charleshia, you can upload a photo here to reply. Click Reply, then on the window you'll see the image below..
click the one which has the red box, it's where you insert the photo
Going back on your issue.. the basic step would be.. take out the inks then close the door... what error message you got? If it's saying "Missing Ink Cartridge" just hit OK. Unplug the power cable at back of the printer, plug it back in.. Clean the copper contacts on the ink cartridges using a lint free cloth then reinstall them. Let me know if it resolved it or not.. I can only give basic troubleshooting here

Problem with printing a PDF

Hi All,
I'm developing a web application written in J2EE that uses Java Reporting Component (JRC) to display crystal reports from some filters recovered from a jsp and passed to a report .rpt previously designed and invoked just at runtime.
I have a problem with printing a PDF:
I want, after entering the filters in a jsp, to print a report in PDF format (WORD) without opening it
with Adobe Reader (Microsoft Word). The class of API JRC used for export is ReportExportControl.
Can anyone help me?
I wish a great day to You all.

Hi Ted Ueda,
sorry for the delay of my answer.
I understand very well the problems related to security.
With the following code that I used to produce a report (PDF) at runtime,
is the PDF created on the server and then sent to the client, or is it directly created on the client as PDF
from RTF previously realized?
ReportExportControl exportControl = new ReportExportControl();
String report = report path;
ReportClientDocument reportClientDoc = new ReportClientDocument();
reportClientDoc.open(report, OpenReportOptions._openAsReadOnly);
Object reportSource = null;
reportSource = reportClientDoc.getReportSource();
//The method setConnectionProperties() stores all the connection parameters in the collection
//ConnectioInfos
ConnectionInfos connInfos = setConnectionProperties(request, reportClientDoc);
exportControl.setEnableLogonPrompt(false);
exportControl.setEnableParameterPrompt(false);
exportControl.setReportSource(reportSource);
exportControl.setDatabaseLogonInfos(connInfos);
//Single method to pass parameters to Crystal Reports. Using classes ParameterFieldController and
//ParameterFieldDiscreteValue
setReportParametersValue(reportClientDoc, reportParameters, subReportParameters);
ExportOptions exportOptions = new ExportOptions();
//Set the export format (PDF)
exportOptions.setExportFormatType(ReportExportFormat.PDF);
PDFExportFormatOptions PDFExpOpts = new PDFExportFormatOptions();
exportOptions.setFormatOptions(PDFExpOpts);
exportControl.setExportOptions(exportOptions);
exportControl.setExportAsAttachment(true);
try {
      exportControl.getHtmlContent(request, response, getServletConfig().getServletContext());
} catch (ReportSDKExceptionBase e) {
throw new ApplicationException("error code", ": error message"); }
As, however, I predicted in my previous message about the direct printing on the client,
I read about ActiveX, but I don't know how to use them.
I read this information in the 'Crystal Reports for Eclipse Developer Guide' about "printMode" attribute:
"In ActiveX print mode, an ActiveX control is downloaded to the client machine and the report is send directly to the printer...."
The ActiveX alternative is a java applet that runs on the client and takes the pdf from the server and prints directly onto the clients through the commands that I used in the DOS command line:
1)     AcroRd32.exe /p /h FILENAME
where
/p = print
/h = hide window
to print the report and
2)     tkill AcroRd32
to close Adobe Reader, because it doesn't end automatically after printing and the command /h is used just to minimize the process.
I hope you can give me advice because I need to print directly on the client. Thank you

Problem with printing pdf file

hello,
lately i have problem with printing pdf file:
i click on the print button and the respod is very slow
it takes more than a minute till the print window apears.
i tryied to install version X but it's the same, the problem exist only when printing via adobe reader,
other programs i'd working much faster.
please advice,
thank you

No, it is not set to overprint. Also, I have to add that the printing results were not consistent. Sometimes it covered and sometimes it did not.

Problem with printing files created by tcpdf class

Hello,
I have problem with printing pdf files created with tcpdf php class which contain embedded fonts
http://www.tecnick.com/pagefiles/tcpdf/example_008.pdf
Could someone try to print that example file at his Reader (printing to file .ps will be fine).
I'm trying to determinate if problem is in my system (Ubuntu 8,04) in Reader or in class.
Thanks in advance

No problem with Adobe Reader 8 or 9 .

Problems with printer and network connectivity

So I've been using an HP B110a photosmart wireless e-all-in-one printer that I got with my macbook pro and at the start, everything worked perfectly in terms of wireless printing, ePrint, and AirPrint. But recently, when I try to print wirelessly, it says the printer is not connected and I also can't find it on the list of nearby printers on the 'add printer' window. I also had problems with printing via ePrint but those have cleared up (I don't know what was wrong but it's fine now). Printing with AirPrint on my iPod touch has stopped working as well because the printer doesn't show up when I search for nearby printers.
Here's what I've checked/tried so far:
All the wireless services are enabled on my printer and my mac
I've reset the printing system on my mac, printer settings to factory defaults
Restarted mac/printer/iPod
Restarted router
Reinstalled HP printing software that came with the printer
All software is up to date
Wireless printing on another windows computer does work
Setting up wireless printing using the HP install disc doesn't work
Trying to add a new printer using the HP software disc that came with the printer is unsuccessful in locating the printer as well.
Printing over USB is problem-free
When I tried restarting the printer/router, I could see the printer for just a few minutes in the 'add printer' list but then it would disappear from the list and the printer would be 'not connected' so I can't print wirelessly.
More info
MacBook Pro (13 inch, early 2011)
Mac OS X Lion (10.7.2)
HP Photosmart e-All-in-One B110a
Router is a Huawei HG556a that I got from Vodafone NZ
Thanks in advance!

http://support.apple.com/kb/DL907

Problems with Print Preview in PO.

Similar Messages

Maybe you are looking for