Product Release Date being default set to 01-Jan-2000 when exporting and importing product file

Hi there,
Just putting this out there to see if anyone else has experienced this problem.
We've just redeveloped an art site that relies on the product release date to order work, newest first, by the date they added it {tag_productlist,,,20,releasedate,true,true}
However, we've hit an issue whereby the 'release date' field is set to 01-Jan-2000 when we export and then import the product file, thus chnaging the ordering. The date can't be set on the import file (unlike web apps) and we haven't changed thousands of products manually. BC support have been stumped, suggesting it's our Mac's system date, but this is set automatically and accurate...and we don't want to change the release date anyway, that should just be the date the product was originally released.
Any thoughts or help would be greatfully received as this was a key part of the site design/development. This is the site http://hanguppictures.com
Cheers
Paul

Ran into the same issue. I was using the release date to flag latest products, regardless of ordering. Unfortunately running a product import then destroyed all that work.
Found this thread with a staff reponse regarding it not being possible to set release dates using import, but it doesn't explain why release dates get reset.

Similar Messages

CS 10.1.2 for Windows - production release date?

CS 10.1.2 for Windows - production release date?

No. Even if there was some news Product Management usually does not confirm in the forums if and when a specific release will be available.
My guideline is: It's there when it's there.
cu
Andreas

Release Date of EM Grid Control 10.2 for HP-UX and Solaris?

Hello,
does anybody know the estimated release date of EM Grid Control 10.2 for HP-UX and Solaris?
Regards,
Martin

We are also very curious about that here. If anyone has any information or estimates it would be much appreciated.
We've ran into the following problem:
Note 338123.1 After Upgrading Catalog Database to 10.2 Cannot Use RMAN Catalog With 10.1 Grid Control
And have been told we have the following options:
Workarounds available:
1. Use dbcontrol for the 10.2 database to maintain the recovery catalog until 10.2 Grid Control is available
2. Use the RMAN command line utility
3. Use the 10.2 Management Agent when available.
Which basically means we are out of luck on OEM RMAN until 10.2, and hope to hear it may be available in the near future.

Language Problem while exporting and importing data

hi,
I have Oracle version 8.1.7.0.0 installed on one server and 9.2.0.1.0 installed on new server.
I'm copying and pasting my version info from SQL*Plus:
SQL*Plus: Release 8.1.7.0.0 - Production on Mon Aug 22 10:46:31 2005
(c) Copyright 2000 Oracle Corporation. All rights reserved.
Connected to:
Oracle8i Enterprise Edition Release 8.1.7.0.0 - Production
With the Partitioning option
JServer Release 8.1.7.0.0 - Production
SQL>
SQL*Plus: Release 9.2.0.1.0 - Production on Mon Aug 22 12:30:06 2005
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the Partitioning, OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>
I created new user on my new server from enterprise manager.
Exported user from the old server and imported in the new server.
i.e: from Oracle8i Enterprise Edition Release 8.1.7.0.0, I did
c:\>exp system/manager file=abc.dmp owner=abc
Then on the new server Release 9.2.0.1.0, I did
c:\>imp system/manager file=abc.dmp fromuser=abc touser=abc
I'm using Arabic Language on my both servers. NLS_LANG parameter on both the servers is AMERICAN_AMERICA.WE8MSWIN1252.
On both the servers I'm able to insert and select data in arabic.
However, after I export the data from old server to the new server, the arabic data comes in question marks.
If I create new table and insert arabic data on new server's user abc it is displaying well. Only the data which I exported and imported is not showing arabic.
On both old and new servers operating system is Windows XP.
I'm stuck with this problem. Anybody having any idea about how to solve this problem please help.
Thank you all in advance.
Regards

Let me be clear here. Storing Arabic data in a WE8MSWIN1252 database is not supported by Oracle and will lead to problems. You are incorrectly using the NLS_LANG to prevent proper conversion and your data appears to be okay when you use utilties like SQL*PLUS to view your data. When you write applications that don't rely on the NLS_LANG like JDBC thin driver for instance you will realize your data is in fact invalid. To learn more about the NLS_LANG you can take a look at this FAQ: http://www.oracle.com/technology/tech/globalization/htdocs/nls_lang%20faq.htm
To migrate your database to a proper character set you can refer to this paper:
http://www.oracle.com/technology/tech/globalization/pdf/mwp.pdf
But please do not ask for help in supporting your current configuration in this forum.

Client Copy- releases of the export and import systems have to be identical

Hi All
I created a new client using the Remote Client Export \ import method (on the same system). The reason being is that I need a 2nd Test Client on the same system with a smaller data set for other testing purposes. As well as needing to re-import the same Testing Client after a future database restores from a different backup, and still needing the same small data set for testing after the restore whipped it out.
Now that the 2nd Clients data set has been used, I've been asked for a 3rd test client, the same as the 2nd originally was. (No problem I figured) So I created the 3rd Test Client (SCC4) and tried importing the same transport files as created the 2nd Test Client.
But I'm receiving the error message "Releases of the export and import systrems have to be identical".
I am on the same system as the originial client export was made from, so the SAP release is the same.
The only other thing I can think of is that we have imported some customizing transports from the Dev system into the original system since the export was taken.
Can anyone help? Is there anyway I can get this back?
Ken

Solution found: Note 1291394 - ERROR : TA194 When performing multiple imports in the same client.
I've imported the note, run the report as per instructions and I can happily say the Import is now running. Although it does seem to be taking a lot longer than it did for the original import.
Ken

Issue Migrating Character Data Using a Full Export and Import

Hi There;
I have a database in my local machine that doesn't support Turkish characters. My NLS_CHARACTERSET is WE8ISO8859P1, It must be changed to WE8ISO8859P9 , since it supports full Turkish characters. I would like to migrate character data using a full export and import and my strategy is as follows:
1- create a full export to a location in network,
2- create a new database in local machine that it's NLS_CHARACTERSET is WE8ISO8859P9 (I would like to change NLS_LANGUAGE and NLS_TERRITORY by the way)
3- and implement full import to newly created database.
I 've implemented first step, but I couldn't implement the second step. I 've created the second step by using toad editor by clicking Create -> New Database but I can not connect the new database. I must connect new database in order to perform full import. How can I do this?
Thanks in advance.
Technical Details
NLS_LANGUAGE.....................AMERICAN
NLS_TERRITORY.....................AMERICA
NLS_CURRENCY.....................$
NLS_ISO_CURRENCY..............AMERICA
NLS_NUMERIC_CHARACTERS .,
NLS_CHARACTERSET.............WE8ISO8859P1
NLS_CALENDAR.....................GREGORIAN
NLS_DATE_FORMAT................DD-MON-RR
NLS_DATE_LANGUAGE...........AMERICAN
NLS_SORT...............................BINARY
NLS_TIME_FORMAT.................HH.MI.SSXFF AM
NLS_TIMESTAMP_FORMAT......DD-MON-RR HH.MI.SSXFF AM
NLS_TIME_TZ_FORMAT............HH.MI.SSXFF AM TZR
NLS_TIMESTAMP_TZ_FORMAT..DD-MON-RR HH.MI.SSXFF AM TZR
NLS_DUAL_CURRENCY............ $
NLS_COMP...............................BINARY
NLS_LENGTH_SEMANTICS.......BYTE
NLS_NCHAR_CONV_EXCP........FALSE
NLS_NCHAR_CHARACTERSET...AL16UTF16
NLS_RDBMS_VERSION............10.2.0.1.0

First, if your applications run on Windows, do not use WE8ISO8859P9. Use TR8MSWIN1254.
Second, if you create a new database, the database is not necessarily immediately accessible to outer world. I do not know Toad and I have no idea if it performs all necessary steps required for the new database to be visible. For example, in the Toad itself, I assume you should create a new connection that references the new SID of the newly created database and use this new connection to connect. However, connections without a connection string use the ORACLE_SID setting in Registry to tell connecting applications which instance (database) to use. To change the database accessed with an empty connection string you need to modify Registry (unless Toad has an option to do this for you). If you want to connect without changing Registry, you need a connect string. This requires setting up Oracle Listener to serve the new database (unless default configuration is used and the database registers itself with the default listener). It also requires changing tnsnames.ora file to create an alias for the new database. Net Manager and/or Net Configuration Assistant can help you with this.
I wonder if Database Configuration Assistant would not be a better tool to create new Oracle databases.
Thanks,
Sergiusz

Export and Import of Configuration Data

Hi All,
I have created a number of custom properties, structures, groups, renderers, layout sets etc and would like to move them from Dev to Test system.
I have found the following in the help doco:
"Export and Import of Configuration Data"
http://help.sap.com/saphelp_nw04/helpdata/en/e1/029c414c79b25fe10000000a1550b0/content.htm
However I am unable to see its functionality in our portal systems (namely the Actions->Export and Actions->Import functions).
Our version of Portal is: 6.0.9.6.0
KM: 6.0.9.3.0 (NW04 SPS09 Patch3)
Therefore we should be able to see it? no?
Are there any special settings to see these buttons?
Cheers,
Vic

Thanks for your replies.
OK, so in otherwords, it is not available in SP09 and only in SP12+.
So, to "transport" this information I will have to manually reapply thes settings in the Test system!
Message was edited by: Victor Yeoh

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Releases of export and import systems have to be identical

hi all,
we want PRD data on DEV , PRD client has been exported successfully. data ( 2 requests from cofile & data) from PRD copied to DEV in cofile and data.
now when we import these requests in DEV client through STMS , it say that "Releases of export and import systems have to be identical"
while oracle patch, kernel patch and java version all are same on both systems.
plz guide
Regards
Khan

Friends,
We also faced same issue while restoring USER Master backup in one of our system. Even after applying OSS Note 1291394 it didn't work for us. Though the permanent solution is to apply this OSS Note only.
As a teporary workaround we can add the TR through OS command using Uncoditional Mode "Overwrite Original" and import also using Uncoditional Mode "Overwrite Original". Below are the commands.
To Add in buffer:
tp addtobuffer <TR> SID Client=<> U012 pf=<>
To Import in system:
tp import <TR> SID U012 pf=<>
Regards,
Mukul SHarma

Export and import of an table data

Hi All,
I have a situation where i need to append/import the production table ( X ) data to test table ( X ) which has some data already in it and should not be lost during the operation. The record count is around 6 million .
Any expert suggestion or tips with export and import command is highly appriciable.
Thanks in advance .

if you are using
IMPDP --- use table_exist_action=append
IMP -- ignore=y
Lets say
impdp username/pwd directory=<directory_name> dumpfile=<dumpfile_name> tables=X table_exist_action=APPEND.
This will append the data to existing table

Export and import change document for user master data

Dear Gurus,
I have two queries on change document for user master data:
1. Are there any approaches to export and import change document for user master data?
We often do system copy from PRD to QAS for UAT and troubleshooting. Before system copy we export the user master data from QAS and then import after the copy process. We would like to keep the change document for user master data on QAS from being refreshed from PRD for security reason.
2. Change document for Role change in QAS
When the role is created or modified in DEV and then transported to QAS, the role change document doen't include this change log. The role change document in QAS only records those role changes directly made in QAS.
Could you advise this is by SAP design or are there any approaches to record this transported role change in the role change document in QAS?
Thanks
YBY

1. Perhaps you want to consider a system copy to a "virtual system" for UAT?
2. Changes in QAS (as with PROD as well) will give you the delta. They should ideally be clean... You need to check the source system.
Another option is to generate the profiles in the target system. But for that your config has to be sqeaky clean and in sync, including very well maintained and sync'ed Su24 data.
Cheers,
Julius

Best way to export and import data from an iPhone app?

How do people here prefer to export and import data from an iPhone app?
For example, suppose your app creates or modifies a plist. It might be nice to provide that plist to the user for separate backup and later allow them to re-import it.
How do people do that? Email the plist to an address? If so, how would one later get it back in?
Is there a common way people do this kind of thing?
Thanks,
doug

Or maybe the best approach for this is some sort of file synchronization feature? Is there a way of having files from the app's filesystem automatically get stored on the computer's filesystem when synchronizing and vice-versa?
doug

Howto export and import SLD data to different SLD's

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Hi All,
I have a landcape with 4 SLD's. A central SLD within Solution Manager and 3 SLD's for resp. XI dev,qas,prd.
The central SLD is version 7.0 and the XI versions are 2.2. (model versions are the same, CR are different -> XI SAP_CR 2.18 -> Solman SAP_CR 2.0)
The idea is that all changes in Bussiness (including new products and software components) and Technical Systems take place in the Solution Manager. After a change we make an export and import it into XI dev, qas and so on.
However....
When adding, for example, an exsisting product to a technical system, export it on Solman and import it into XI dev, all entries dissapear(sapms/host/clients).
We filled Solman with a full export of XI development and that worked fine.
Does anybody has an idea about actions to be taken?
Thanks,
Sjoerd Lubbers

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

Data Export and Import

Hello,
I need a suggestion.
I have two databases namely DB1 and DB2 and they are on different servers
S1 and S2 respectively.
What could be my approach to move data from DB1 to DB2.
1:-Do i need a database link to do this.
2:-Can i do this without DBLink if i have access to both of the Databases and DBA rights on both of the Databases.

My lowly opinion ,
it's depend on :
- db1 and db2 is in same version
- if same and db are until 9i You can use exp/imp
- if 10g You can use datapump (expdb , or dbms_datapump)
- if version is different You have to use different exp/imp utilities
- how many data you wont to move
- determine to use db link , or export
Answer,
-Yes db1 and db2 are of the same version.
-They are on Oracle 10g.
-Firstly i want to move a single table data, if successful then decide.
Now guide me how to go for it. Do i need DB link or is there any other method i can use for export and import.

Product Release Date being default set to 01-Jan-2000 when exporting and importing product file

Similar Messages

Maybe you are looking for