Punch In Woes!

Been having issues when punching on the fly. It seems that the first 2 or 3 punches track fine, but after that the part being punched will return to a previous punch, or will have a slight delay, or dead start where the punch began. Even though I can hear the input, and see waveform, as soon as I punch out, it stays stuck in a previous take, or has a bizarre anomaly such as the delay, etc. Has anyone else had this issue, or have a fix?

Because whoever programmed it must be ********, I've dealt with this issue long enough. I've sent Apple feedback on this issue long ago and nothing has been done yet. The only work around is to try and remember that every time you double click in the punch line to hit the c button to turn it off before you start recording or you have to drag your punch line around all the time, what a pain in the ***.

Similar Messages

Continual Mac woes (no question, just a rant)

It's Tuesday, and I am having terrible problems with my Mac. But then, why should Tuesday be different from any other day of the week.
Here is a typical day for me. The computer appears to be working OK. I need to watch a DVD for my work. I turn on DVD player, and put one in. The machine can't read the disc. It clicks and whirls, but the icon does not show up on the desktop. Meanwhile, so distressed is the machine that it freaks out. What was up until now was a fluidly operating machine suddenly reverts back to its old ways (i.e., its ways of two days ago). The hold ups and spinning pinwheels begin to eat of hours of my work day. (Remember the old days when computers made life easier?) The machine becomes sticky, gummy. Oh, I can move the curser and it seems to work for a second but then gets stuck in the dock, which explodes in icons and then freezes for five minutes. Yes. Five minutes.
Would love to use Force Quit, but the cursor is spinning, and nothing is responding. Funny about that old Mac. You can't force quit Force Quit. I guess I need to leave it open all the time.
Of course, FQ usually works on Safari. I have never just "quit" Safari. It always requires Force Quit, otherwise I can't turn off my computer. It stalls shut down.
Now I have a DVD trapped in there and can't get it out. [But I just got an answer from another posting.]
In the old macs, there used to be a pin hole you could stick a needle into ... can't find one on my flatpanel iMac.
I bought my Apple flat panel iMac in August of 2002. Yes, I know that that is a long time to have a computer, but I am not rich nor attached to a corporation that can splurge on computers. The first weekend I had the machine, I had three kernal panics.
Among the other problems I have documented are the following: the dock hiding itself unbidden and other features checking and unchecking themselves (Aug 2002); bus errors connected with OS 9 (Sept); some problems that inspired the tech person (Eric)) to talk me through deleting my user i.d., resulting in the loss of two months worth of e-mail (Thursday, 12 September); Preview problems (September); a bizarre box with an unmovable and undeletable red stop sign in it that no tech person or other Mac user I know had ever hear of (Monday 30 September); printing problems; computer won't shut down, numerous disconnection errors, which turned out to be caused by an OS X update (beginning December, 2002, or later); Kernel panics (Feb); computer won't shut down (March); Faxstexx problems, program won't allow me to set it up, finally just deleted the software (April); keys like "V" freeze and repeat endlessly (May 21); DVD Player freezes (May); Safari and Mail begin quitting unexpectedly (May); cursor begins to blink and fade out, plus odd sounds come out of the speakers, a constant error beeping (Sept 9); DVD Player problems (Oct 4).
I called AppleCare while I had it about once a week (the total between August 2002 and the time it ran out was about 155 calls). Naturally, some of these calls are motivated by user error. On the other hand, many of the issues I have called about were unprecedented as far as the Tech person was concerned, such as the blinking mouse, the red stop sign, and the DVD Player woes.
Things improved with Panther, but in Tiger many of the same old issues have returned.
I have been having so many problems with my Mac that I once wrote a letter to the company asking when do I qualify for a new replacement machine. I never received an answer, but I felt better for about a day. Then I turned on my Mac again.

The spinning ball of death as we used to call it is often caused by a lack of RAM, it is hard to be sure as I am not working on your machine, but sometimes things can be improved with additional RAM, it makes it seem like a whole new computer.
A lot of your problems sound like stuff that can be fixed easily enough, and although frustrating things happen here and there with updates. It sounds like you are in fairly good spirits with it all, I would suggest just researching a bit more into maintenance you can do to help maintain the computer and educate yourself a bit more (sounds like you already have learned quite a bit along the way) and you will find a lot of these issues take you a few seconds to rid yourself of. I would start by making sure you are repairing permissions regularly and running the most up to date software. If a lot of problems persist, try creating a second user that is a "test" user to see if the problem is replicated on that user (don't delete your other one, but if you do find the problem not on the other user, you might have a corrupt user, however you don't have to lose all your emails there are plenty of ways to back it up and import it in, or even just bring the entire Mail folder from your library over to the new user). Another thing you can do if you find a lot of system problems is archive and install the OS, it takes a bit of time, but doing it overnight shouldn't be an issue, and you won't lose any of your stuff.

SRM 7.0 cross catalog search transparent punch out and MDM

Hi,
I have problems with transparent punch out and OCI.
We are using HTTP POST, but when we create a SC what should we recieve in SAP. I suppose we should use HTML (the vendor suppose submitted HTML), but as far as I see it, SAP expect to recieve HTMÆ, right? http://www.attsuppliers.com/downloads/OCI_40_EN20030611.pdf
<form name="ociform" action=" https://eprocurement.site.com/RecieveOCI.jsp" method="post" enctype="application/x-www-form-urlencoded; charset=UTF-8">
<input type="text" name="NEW_ITEM-DESCRIPTION[1]" value="Java developer"/>
<input type="text" name="NEW_ITEM-QUANTITY[1]" value="1"/>
<input type="text" name="NEW_ITEM-UNIT[1]" value="EA"/>
<input type="text" name="NEW_ITEM-PRICE[1]" value="15000.00"/>
<input type="text" name="NEW_ITEM-CURRENCY[1]" value="EUR"/>
<input type="text" name="NEW_ITEM-LEADTIME[1]" value="1"/>
<input type="text" name="NEW_ITEM-VENDOR[1]" value="8c7d1ea0-7823-1000-b356-c0a87c200001"/>
<input type="text" name="NEW_ITEM-VENDORMAT[1]" value="112233"/>
<input type="text" name="NEW_ITEM-MATGROUP[1]" value="8800000"/>
<input type="text" name="NEW_ITEM-EXT_PRODUCT_ID[1]" value="448f129ad5ebd8903ae85708c1316dbb"/>
<input type="text" name="NEW_ITEM-CUST_FIELD6[1]" value="20"/> 
<input type="text" name="NEW_ITEM-CUST_FIELD7[1]" value="1"/> 
<input type="text" name="NEW_ITEM-CUST_FIELD8[1]" value="1"/> 
<input type="text" name="NEW_ITEM-CUST_FIELD9[1]" value="0"/> 
<input type="text" name="NEW_ITEM-CUST_FIELD10[1]" value="0"/> 
<input type="text" name="NEW_ITEM-ZZ_E_MAIL[1]" value="[email protected]"/> 
<input type="text" name="NEW_ITEM-LONGTEXT_1:132[]" value="Request: The description of0000004 v 1. Quote: quote-0000001. Description: Pet Dogs"/>
</form>
Furthermore, is it possible to do cross catalog search accross MDM and a transparent punch out catalog?
/Jimmy

We are having problems with Transparent Punch Out and OCI.
We are using HTTP POST, but when we create a SC what should we receive in SAP??
Should we receive raw HTML or submitted/posted HTML?? As far as I can see, we should receive raw HTML...or?
Furthermore, is it possible to do cross catalog search across MDM and a Transparent Punch Out Catalog?

Problem in punching AP invoice.

Problem in punching AP invoice afetr upgrade to ERP R-12.

Hi,
Can you please be more specific about what the problem is?
Cheryl

Questions on punch in and mix down

i've been using vers 1.5 and it seems a lot simpler to use. after punching in and want to keep the take- how do you put it in the track. another question i would like to mix my vocal to another track in multi track that i have added a fx to, i don't see how to do it. i hope i can get my questions answered i am fustrated.
jimbo3779

Never say "no", but I have not yet discovered that feature in GB 10.0.
Have you kept your GarageBand '11, version 6.0.5? The GarageBand 10.0 installer will have moved it to a subfolder "GarageBand 6.0.5" of Applications, so you still can use it. It works well with Mavericks.
That Apple did not remove the older version indicates to me, that Apple is very aware of the missing features, and I hope that newer GarageBand release will bring many of them back (sampler instruments, podcast track, effects, punch in). In the case of the new iWork for Mac the developers even announced a schedule, when the missing previous features will be supported again, see: About the new iWork for Mac: Features and compatibility
Let's hope, we will see the same for GarageBand.

How does one use punch in with v 5.5?

Hello, just downloaded the trial in hopes the punch in functions were straightened out (my terminology)
vs. version 3.
So far I haven't found a way to use this (non) feature. I can punch in but then what does one do to
select and merge the best take?
Once I click on the main clip in the track the punched clip goes to the background (i guess)
Also, in previous versions I would record multiple takes and only the last (top) version would play.
In 5.5 they all play - whether they are visible or not.
I've searched through help and the forum for information about this and haven't found anything.
I know I can't find things in the refrigerator either but that's beside the point.
From what I gather it will be a while until there is an update to this version so unless someone
can tell me how punch in and take selection is supposed to work I won't be able to upgrade.
Assistance in this matter will be appreciated.
Thanks.

Durin,
What do you mean:
"The options to only play the topmost clip or to select which clip is played is a separate item, but also shuffling up the list."
I also only want (like Floyd) to hear the "on top" sound from "punching in" as in V3. The marketing material for V5.5 mentions :
Quick punch
Quickly fix recording errors by punching in corrections on-the-fly as you rerecord: Toggle the record button to punch in your new take only where you want it to replace the old one. Punch in and out as many times as you want.
Currently nothing is replaced, only stacked on top. Freaky when you first hear the take.
When you say "end up", should I wait for V6?
Thank you for your time.
-Ed

I bought a song on my iPod and I put it on my iTunes on my computer now it won't play on my iPod, I'm gonna punch someone I like my song that wouldn't play, how do I fix this?

I bought a song on my iPod and I put it on my iTunes on my school computer (MacBook Air) now it won't play on my iPod, I'm gonna punch someone, I like my song that wouldn't play. If you can help me kik me (becca_wuvs_you) or answer in the comments

Try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Unsync/delete all music and resync
To delete all music go to Settings>General>Usage>Storage>Music>Tap edit in upper right and then tap the minus sign by All Music
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.

Is it possible for documents in a portfolio to keep their page/print setup, i.e.staples/punches etc?

Hi,
I have to create training materials on a regular basis. These materials are generally folders with various forms, role plays cards and general reading. Also, each course demands a different mix of materials - I find my self spending days printing out each document and then arranging them.
Now I know using Acrobat Pro's portfolio feature would allow all the docs to be put together but will it also allow me to keep the staples, punches etc that are different for each doc in the folder????
Just combining all the docs will not work.
Thanks
Jeffrey

First if you open each of the components separately and turn on sidid bar you can drag and drop the Thumbnails in the sidbar in to exct order you need.
Then save the changed PDF.
Next open Acrobat XI and choose File Menu > Combine files into a single file, or create Portfolio
this will open a special window for either. You should then be able to place individula Pdfsin the order you want them to show up.
Combine files let you attach to originl PDF word, excel file, Graphic files not just PDF's
PortFolli only works with PDF's
in both you can drag items around to rearrange.

ICal woes - any help please

Hi everyone, I am having some major iCal woes that I hope someone has the answer to.
Ok this is how I handle my workflow. I have numerous calendars such as "call", "viewing", "meeting", "work misc", "personal" etc. All colour coded and I use the month view as standard.
Under SL I would double click the day I add an event go through the boxes (name, location, time, etc) click save and job done.
Now under Lion when I double click a day I get an event box but only the header. So I have to type the header hit return then double click on the event again to get the box up so I can assign the event the right time and calendar to use. This is taking twice as long as it did before under SL and is a pain when you have a client on the phone. Am I missing something here? Why is it now so hard? - and I have tried that quick entry business but it doesn't work for me, I simply want the whole calendar entry box when I double click in month view.
Next problem is all new events go in as a all day event. Again another click I didn't need to do in SL. Then untick all day and enter a time LionCal doesn't set the end time 1 hour later anymore it sets it hours later for me, sometimes into the next day so I have to click into the date box and type the end date, again a massive slow down in my workflow.
Finally and most annoyingly in month view I cannot for the life of me get a 12 hour clock with AM/PM. I checked my international page in sys prefs and all is ok but LionCal is not playing ball.
Any help would be appreciated as I love iCal and run my life with it over MobileMe.

If you want to Commit changes at every record level in a Multi-Record Block, you may have to write the following triggers at the block level :-
1) Key-Down
2) Key-Up
3) You will also have to handle Mouse Events
i.e When-Mosue-Click etc
In each of these triggers, issue a commit statement :-
i.e.
Trigger Name :- KEY-DOWN [ Defined at Block Level ]
Trigger Code
Commit_Form;
Next_Record;
The Commit_Form statement will display a message for the user to COMMIT transaction to the DB.
Shailender

HT1918 I'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the probl

i'm having some issues trying to change my account billing---I have a new debit card and i need to punch in the new number but when i go to edit my info itunes says my 'session has timed out.' i've logged in and out more than once. what's the problem?

Try to change the credit information from your iphone or other ios device. Tap on settings > store > tap Apple ID > tap view account > tap payment information > change

Airport express "G" - My woes and some thoughts. . .

I got the airport about this time last year. it worked great and i loved it. In December 2007 I moved to an apartment. I got the local cable co's internet, ran it to my ax and all was well. 6 weeks ago, due to our wonderful economy, i had the cable shut off as I talked to one of my neighbors who has wireless internet running unprotected (no password)..i asked him if i could leech for a bit till i got things sorted. he said cool and all was.....hmmm. SO in my airport menu i select his network and my internet works, sometimes drops then comes right back but no biggie. I reset my ax to just do airtunes and join his network, it restarted and voila, airtunes. problem is that in the last month i get a lot more drop outs and if i go more than 2 days with out streaming by ax disappears and i have to do a hard reset to get it to show up in the utility. The light is green but nothing...sometimes the amber light blinks and it never come on line at all....grrrrrr.
could all my newfound ax woes be due to the fact i am adding it to his network? i had no issues at all when i created my own one with my internet and airtunes.....
anyone?
EDIT: let me ask this then...when i am streaming music from my mbp to the ax, am i doint it dorectly or am i using his network? If I am sending music from my MBP to the ax via his network then that would basically answer all my questions, if the mbp goes direct then I have no clue....
edits as i am brainstorming

EDIT: let me ask this then...when i am streaming music from my mbp to the ax, am i doint it dorectly or am i using his network?
It goes from your MacBook Pro to his wireless base station... then from his base station to the AX. So it depends on the performance of his base station and network.

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

Hey. I have received an iTunes gift card, so I was all excited, punching the code into the "redeem" option on iTunes on my iPad2; however, I kept on getting the alert, "This is not recognised as a valid code". It is very legible, though. How come?

The obvious answer I think is that maybe you are not entering the letters and numbers correctly. I almost never get it right the first time when I use a gift card.
Try entering the code again - slowly and methodically. If it still doesn't work - look here for help.
http://support.apple.com/kb/TS1292
One final thought - if you are using a gift card that was purchased in another country - say like you have a Canada gift card and you live in the U.S. - that card will not work in the U.S. iTunes store.

Hp Warranty Woes & Hard Drive Heartache

HP – Warranties Woes & Hard Drive Headaches.
Dear Internet Community (I.C)
I need your help.
I would like to know if I’m being unreasonable in my expectations or is Hewlett Packard (HP) not living up to its both moral & legal obligations as a good corporate citizen & what it alleges to be – a Customer Focused Global Computer Services company.
Apologies if this is a little long winded but in the interests of fairness I need to put as many HP comments in as possible – to give you a clear picture.
So bear with me, you will not be disappointed & there are a couple of questions you might like to answer & feedback to the appropriate parties.
Keep in mind at all times we are talking about approximately a $200 (NZD) fix – less than the lost profit on one lost sale for an HP PC ( you might think twice about HP products after reading this).
There are two parts to this problem :
Part 1 :
I purchased an HP Touch Smart a few years ago, I registered the product & warranty with them & over the years have received have received numerous emails stating “buy this, upgrade now”.
But I don’t recall ever receiving an “WARNING – Critical Failure Issue (CFI) apply attached patch immediately” email while under warranty. Why is this relevant?
Ø Seagate makes Hard Drives – in this case a Barracuda 7200.11
Ø HP buys said HD’s from Seagate
Ø Seagate finds a problem with firmware in HD’s & advises HP & supplies a fix
Ø HP knows which Customers have these HD’s, because you know what goes into your machines – right ? - see below
Ø HP FAILS to send email to Customers with the fix (a simple email with attachment would solve problem) or issue recall.
Ø HP even offers previously to fix problem FOC & puts fix on its Website - but only if the Customer knows somehow of the problem.
Ø Should the Customer intuitively& telepathically know of problems in HP Products in advance before it fails, because of course HP is not telling their Customers.
Problem or Outcome: My HD has bricked itself & will not operate as I never received notice of the firmware fix at any time either in or out of warranty.
Paul Boshoff - G M -Personal Systems Group- HP NZ (PB- GMPSG) says
“It would be very difficult, if not impossible, for any computer vendor to proactively notify it’s customers of component-level updates”
“Failures of the kind you’ve experienced are usually related to a specific batch of serial numbers and often those component serial numbers aren’t available when the user is registering that particular computer.”
Now let me know if you think I’m wrong, but it sounds like HP does not know what goes into its machines or at the very minimum does not keep track of this.
HP, a Global Computer Services company cannot possibly be expected to track what goes into its machines. HP apparently does not record or match the serial number of the HD with the machine it goes into.
If Ford & Toyota can track & record what tyres go on which make & model of their cars which are in the millions each year & can recall cars dating back 8-10 years just case of a manufacturers component malfunction why can’t HP link & record the HD details.
I can just hear it now “I’m sorry we don’t know which engine we put in your car”.
And let’s be real clear here – we are not talking about some small screw at the back of a PC – Along with the CPU & the RAM, the Hard Drive is pretty much up there in the top 3 of important components of any computer.
I.C – Do you feel
ü That fills you with confidence in HP products & services ?
ü Should HP be required to tell its customer of CFI’s with its products – particularly while under warranty?
ü Has HP tried to limit their liability & cost by directly NOT telling Customers of CFI’s while under warranty?
Part 2 :
When your HD bricks itself – apparently all is not lost – some very clever person has found a solution so you can get the HD going long enough to apply the firmware fix & then your HD is a good as new – Here is the link that spells it out with pics http://www.overclock.net/t/457286/seagate-bricked-firmware-drive-fix-with-pics)
You’ll see the relevance of this shortly.
After much messing about I received the following email from PB- GMPSG : “I have escalated your issue and have just received the go-ahead to repair your unit at our cost. We will be utilizing our own, authorized service provider to re-install the original hard-drive and to run the software fix on that unit.” (This guy most likely earns a six figure salary & isn’t able to sign off $200 fix).
NOTE : it does not limit or restrict what type of fixes will be used & also at this time HP was aware of both the Seagate fix & above fix.
I delivered the PC & bricked HD into the HP Authorised Repair Centre (ARC) as requested –their ticket instructions read “do firmware update…HP to incur costs. NO COST to customer”.
Obviously it’s not rocket science but you need the HD going before you can apply any firmware fix including this one – HP knew that to get the HD going they would need a special fix to enable them to apply the Seagate fix.
After all this is not an isolated case & I did point out to HP that they would need the fix I supplied (or something similar HP approved or designed if that made them more comfortable) prior to their offer of fixing the HD.
HP said their ARC’s had all the right software for fixing their machines. In addition I have been told on several occasions, the ARC’s are the bee’s knees, the cat pajamas, the whiz kids of the PC service world “The first port of call for the repair centre agent is to download all the latest service advisory notices and updates. This is a very fundamental part of the repair process and one that we spend a great deal of time emphasizing with our authorised repair centres” Keep this in mind.
A week later I received a call from Peter Gasporaratos, HP CS Melbourne (poor guy – caught in the middle) & stated “there is nothing else we can do for you”. When I asked if they had applied the fix he said “its not our responsibility.. its not part of our guidelines.. the ARC does not practice unauthorised methods..& this ARC will not go down this path”
Ironically the day before, Barry from the ARC said “we can attempt it, but we will charge you too”. So HP’s own ARC will do it, but there will be a cost – but hang on a minute, didn’t PB- GMPSG say “to repair your unit at our cost. We will be utilizing our own, authorized service provider to re-install the original hard-drive and to run the software fix on that unit” & HP CS put on the instructions “HP to incur costs. NO COST to customer”.
I.C – Do you feel
ü HP have said they will fix it at NO COST to me, regardless of what the fix entails ?
ü Should HP honour this commitment ?
ü Would you do business with a company that says one thing & does another & does not honour its commitment ?
ü That given the bricking fault did not need to happen if HP had been proactive in letting their customers know of the firmware issue & this is not an isolated case– shouldn’t they then be responsible in finding or developing a fix for getting the HD going long enough to apply the firmware fix if they are not going to use other recognised fixes.
Abstract
So that’s it – what do you think I.C. ?
Would you want HP computers & servers controlling the Traffic Lights, Air Traffic Control, Patient records & Medications at Hospitals knowing that HP will not tell these organisations that there is CFI with their products & they could suddenly lose everything. All dead while they try to find a back up computer with all the data – god forbid if President Obama’s “football” is powered by an HP – Nuclear War before we know it.
But seriously – I would love your feedback – Am I being unreasonable in asking them to honour their commitment for a $200 fix ?
And of course HP being a Customer Focused Global Computer Services company, would welcome your feedback.
Here are a couple of the players contact details who would love to hear from you :
ü Keith Watson – CEO –HP NZ -I initially contacted him & he thanked me for bringing it to his attention, then nothing.
Email : [email protected]
ü Paul Boshoff - G M -Personal Systems Group- HP NZ – well of course you now know who he is now – he would love feedback.
Email : [email protected]
ü Jessica Rangi – She’s the Spokes person/PR/Marketing for HP NZ & has just help launch HP new PC range in NZ – She would love your feedback as it might impact on her marketing & she is quoted as having helped out in warranty situations before & has worked at HP head office.
Email : [email protected]
ü Meg Whitman - President and Chief Executive Officer of HP Global
Email : [email protected]
They would all like to hear from you J
I.C
J Thanks for being patience & reading through to the end – now it’s up to you
L buy HP Products & Services or not.
L Do HP deserve your hard earned money if you now believe they aren’t going tell you about problems with their Product & Services.
Be kind to one another & take care.
Regards
Smithie
P.S - I sent this blog to HP for fact & quote checking prior to uploading (I gave them over a week to reply) – the silence was deafening from HP.

When requesting assistance, please provide the complete model name and product number of the HP computer in question. HP/Compaq makes thousands of models of computers. Without this information it may be difficult or impossible to assist you in resolving your issue.
The above requested information can be found on the bottom of your computer or inside the battery compartment. Please do not include your serial number. Please enter the model/product information into HP's Online Consumer Support page and post it here for our review.
I doubt the hard drive would be covered by buying an extended warranty after the fact. There is also no reason to buy a new hard drive from HP. Almost any 2.5" hard drive on the market will work in your computer. You will need your personal HP Recovery Disc set to return the computer to a factory like state. If you didn't create these discs, you will need to order a set.
If you have any further questions, please don't hesitate to ask.
Please click the white KUDOS star to show your appreciation
Frank
{------------ Please click the "White Kudos" Thumbs Up to say THANKS for helping.
Please click the "Accept As Solution" on my post, if my assistance has solved your issue. ------------V
This is a user supported forum. I am a volunteer and I don't work for HP.
HP 15t-j100 (on loan from HP)
HP 13 Split x2 (on loan from HP)
HP Slate8 Pro (on loan from HP)
HP a1632x - Windows 7, 4GB RAM, AMD Radeon HD 6450
HP p6130y - Windows 7, 8GB RAM, AMD Radeon HD 6450
HP p6320y - Windows 7, 8GB RAM, NVIDIA GT 240
HP p7-1026 - Windows 7, 6GB RAM, AMD Radeon HD 6450
HP p6787c - Windows 7, 8GB RAM, NVIDIA GT 240

Logic Pro X Unknown Punch-Out Range

Hello,
For some reason when I try and setup an auto punch, the punch out marker is unknown and the red bar seems infinite... so I can't set a proper out point. Does anyone know how to reset the range... maybe enter it manually?
Thank you.

Hi
Control Click on the Control Bar and customise: add show Sample Rate/Punch Locators
You can then adjust the Punch locators numerically
Alternatively, use one of the Punch In/Out locator key commands such as Set Punch out Locator by Playhead (default Control Option Command O)
CCT

Apple TV keeps asking my for my Credit Card verification code and I punch it in, still asks me for it, and restarted everything, went to my computer, checked the code, all is set, still can't rent a movie. Please help!

Apple TV keeps asking my for my 3digit Credit Card verification code and I punch it in, it still asks me for it, and went to my computer on iTunes store, checked the code, all is set and saved, go back to Apple TV still can't rent a movie, I still get the same Verification Required message without any further information after I punch in my 3digits. When I hit submit, the page goes back to the same place to type the code again, and yes the code is 100% accurate. I tried restoring the apple tv, every thing is up to date on all devices and signed in and out of my itunes store on my Mac, still no luck. Please help!

This issue actually started a week ago... see: https://discussions.apple.com/message/23399558#23399558
to determine if there are the same problems you are experiencing. I have spent over 6 hours on this issue trying to isolate if it is a hardware, software, network, iTunes account, or Apple device issue. My initial results indicate it is a software specific issue related to the Apply TV hardware device.

Punch In Woes!

Similar Messages

Maybe you are looking for