RE: Have a Menu that needs sub menu for submenus...

I do not know if this is the right forum for this.
However here goes.
I have a Flash Menu that I am working with using Action
Script 2.0 inf Flash CS3. I have successfully created the Main menu
and the sub menu, however I need a sub sub menu for the sub menu to
operate the same way the sub menu does for the main menu.
I do not even know where to begin doing this.
I have attached the .fla CS3 file. maybe someone can help me
do this or point me in the right direction possibly???
thank you Adobe members and to anyone who can help with this.
If this requires some kind of payment. it's not a problem I can do
that via paypal acct or send a check or wire the money.
I just really need to get this done for a client ASAP.
note: I will send the file if anyone is interested via
trillian, ftp or email or some other viable form of digital
communicatiion.
thanks again,
Dan

Hello,
You need to use p_body_html then construct an html email to be sent to feed into that (you also need to provide the p_body for email clients that don't support html)
To get give a link to the specfic item you want you need to use something like:
'http://your.server/pls/apex/f?p=100:1:::NO::P1_ITEM_ID:'||ITEM_ID
Where 100 is you app id, 1 is your page number, P1_ITEM_ID is the item that sets your primary key for the page and ITEM_ID is the primary key of the item you want to display.
Hope this helps
Luke
Message was edited by:
LWhitelock

Similar Messages

  • Menu Button from sub menu to main menu (transition movie in the way.)

    In the general tab of the disc menu I set the menu button to go to the main menu.
    When I click "menu" on my remote in simulation from a sub menu I expect it to return me to the the main menu.
    However, clicking menu from a sub menu automatically brings me up one connection.
    I have transition movies that are between the main menu and the sub menu.
    So effectively, the menu button is a loop if a viewer tries to navigate upward with the menu button from a sub menu. They see the transitional movie and return to the sub menu they were trying to navigate from.
    On page 609 of the manual it says...
    Menu: Supported by all elements that can set remote control settings (disc, track, story, marker, and slideshow) except menus. You should generally link this button to the last menu viewed.
    Is there a work around that will allow me to make the menu button link from a sub menu to the main menu, even if I have a transition movie in between?
    Thanks,
    Tom
    Power Mac Dual 1.0 GHz G4, Quick Silver   Mac OS X (10.4.3)   1.5 Gig Ram, 250 gig internal drive, 2 x G-Raid500, FW800 Sonnet Card, AJA IO
    Power Mac Dual 1.0 GHz G4, Quick Silver   Mac OS X (10.4.3)   1.5 Gig Ram, 250 gig internal drive, 2 x G-Raid500, FW800 Sonnet Card, AJA IO

    Hang on Tom - are you saying that you are in a sub menu, pressing the 'menu' button on your remote control, seeing the transition and ending back at the menu you started from?
    I would expect this if you used the menu button...
    What happens is the menu button acts as a resume function if you are in a menu. That is, it will play the last piece of footage - your transition. This is set to go back to the sub menu, so that's where you end up. Read those details again... the bit where it said 'except menus'.
    If you are in a menu and want to go up one level then you need to either use the Title button (if the title menu is the one you want to get to), or the return button (which won't work all that well). The best way, however, is to add a button on your menu screen which lets the viewer click it to go to the menu that you want.

  • My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

    My iPad 2 shows I have 7 apps that need to be updated and when I go into my App Store it won't pull up anything for my updates how can I fix this????

    It seems Apple is having some issues at their end. There have been hundreds of posts on the forum with the same problem.

  • I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I now have 5 devices that access the "cloud" via Match. I also have 3 computers that need to be authorized. Is there a way to authorize all these computers/devices in such a way to allow everything to access and sync to the cloud?

    I had a problem with a 5.0.3 project that would cause 5.0.4 to crash. Apple asked for a copy of the project and later told me it was because there were some empty text layers. Apple is aware of the issue and is working on a fix.
    In my case I still had 5.0.3 on another Mac and could clean up the project. If empty text layers might be the problem, do you know someone with an earlier version who could open it and remove the empty layers? I'd be willing to give it a try if you'd want to send me the project.
    Ross Hunter

  • I have an ebook that needs a flash player to play? Is there anyway that that next update will be a le to read this type of format

    I have an ebook that needs a flash player to play? Is there anyway that that next update will be a le to read this type of format

    Johnathan Burger wrote:
    No.
    Flash is never coming to ios.
    Adobe has discontinued mobile flash for all devices.
    Take a look at bluefire reader.
    Wow, are you serious?
    That really ***, I have been playing with mine and can't believe I can't use 3/4 of the sites I like on it.
    My Android tab runs Flash just fine, and has done so for 2 years. Are you suggesting one day Adobe is going to break in my house and uninstall it?
    I don't understand this at all, it seems at every turn I try to use this thing like my android tab and I simply can't, all I've found so far to actually be able to do is use iTunes for everything... pretty lame and something I'm not going to do when I can get this content free on all my other devices.
    This is truly a shame. I was really hoping I was just doing something wrong. Glad I only spent $50 on it at a garage sale.

  • Hello,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    ****,I have done this successful in the past but on my IPad it shows I have 4 apps that need to be updated so when I hit the update tab all I get is a white screen. When I hit the purchase or other tabs it opens up. What could be the problem?

    There have been numerous reports on the forum today regarding this issue. It seems to be an issue at Apple, but no information has been posted on the status site.
    http://www.apple.com/support/systemstatus/

  • I have 4 applications that needs updating, but when downloading it fails. what can I do to update.

    I have 4 applications that needs updating, but when downloading it fails. what can I do to update.

    Are you trying to update only that one app or more that one app (via Update all)? You have to log into the account that purchased an app to update an app. If you have apps purchased by more than one account you have to update tem one at a time until the remaining apps were purchased from one account.

  • The App Store says I have 3 apps that need to be updated but when I go to update no apps show up

    The App Store says I have 3 apps that need to be updated but when I go to update no apps show up

    I have a similar problem and have had this before.
    I rang Apple the first time and they said because I had 2 Apple ID's this can happen so I cancelled one Apple ID (which is another problem and drama in itself) and that resolved the issue.
    I now have the problem again with only one Apple ID so I've transferring purchases from my iPhone and iPad to iTunes. Then I synced again and hoped for the best. Unlucky! Didn't work. Time to call Apple support again...

  • I have 5 apps that needed updating. I updated and now apps are "frozen" in updating stage. They won't even delete after I hit delete button. What to do?

    I have 5 apps that needed updating. I updated and now apps are "frozen" in updating stage. They won't even delete after I hit delete button. What to do?

    Reset time, press and hold both the power and home buttons for 10-15 seconds till the Apple logo appears. Release both buttons. Wait 15-20 seconds till your iPad starts on it's own. Check the downloads.

  • Hello i Have a xserve that needs a new power supply can anyone help

    Hello i Have a xserve that needs a new power supply can anyone help

    XServe Power Supplies are readily available, either through Apple support or from a variety of third parties:
    You don't mention which XServe model you have, which may change things, but these might be good starting points:
    http://www.welovemacs.com/xserve.html
    http://store.apple.com/ie-business/product/MA945ZM/A
    http://www.google.com/search?client=safari&rls=en&q=xserve+power+supply&ie=UTF-8 &oe=UTF-8

  • I have a new iPad Air. Can I use plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak. I'm off on holiday and haven't got the capacity to have everything on that I'd like for the kids

    Can I use a plug in USB camera reader to have a load of movies etc on an external hard drive and then plug and play so to speak? I'm off on holiday and haven't got the capacity on the iPad to have everything on that I'd like for the kids.
    So basically I want a hard drive with X amount of films etc on. Can I then watch them on my iPad?
    Hope this makes sense.

    External HDD won't work.
    You need something like this:
    http://www.seagate.com/goflexsatellite/

  • I download radio programmes via Podcast, but have recently found that some episodes play for only 30 seconds and then the whole app quits. This happens even though the whole episode has downloaded. I would be grateful for advice.

    I  download radio programmes via Podcast, but have recently found that some episodes play for only 30 seconds and then the whole app quits. This happens even though the whole episode has downloaded. I would be grateful for advice.

    Try:
    - Reset the iOS device. Nothing will be lost      
    Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
    least ten seconds, until the Apple logo appears.
    - Delete the problem episodes  and redownload.
    - Reset all settings                            
    Go to Settings > General > Reset and tap Reset All Settings.
    All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
    - Restore from backup. See:                                               
    iOS: Back up and restore your iOS device with iCloud or iTunes
    - Restore to factory settings/new iOS device.                       

  • Horizontal menu with horizontal sub menu using image rollovers or similar

    Hello,
    I am brand new to web design and working on my first site.  What I lack in skills, I have in free time to learn right now : ) Please let me know if there is a tutorial or other resource that describes what I am trying to do...I've been searching for days and just can't find what I'm after.
    The design concept is a menu of main categories that apear to be floating over an object.  When you hover over one, it looks like it gets pressed down in space resulting in the next line populating with subcategories to be selected.  If you click on the main elements, you would be directed to that page - Services for instance.  If you just hovered over a main category, you would be presented with a list of sub-categories that behave in the same fashion.  If you then clicked on one of the sub-categories, you would be taken to that specific page.
    Here's a sequence of images that show what I'm after.
    I built all this in Illustrator as described in a Lynda.com tutorial.  I then exported slices to dreamweaver and started building content.  Each of the categories and sub categories is a separate slice with images built for the rollovers.  I was able to build the main categories and get them to visually sink upon using an imageswap...now I'm stuck on how to get the second line to behave as I described.
    This is a fun learning experience.  Let me know if there is a better way to achieve the design.  I just stared investigating SSIs as well and see the value in having this menu in just one place, referenced into all my subsequent pages.  I have successfully embeded an SSI footer with rollovers on my page, but this menu problem is really tough for me.
    I really appreciate any pointers.
    Thanks,
    Jeff Prince

    I tried building a Spry Horizontal menu to get what I want, but I had no success there.  Any tips for that?
    On a separate note...I do not know if it is proper to use a 'tabbed panel' for my menu project, but it seems to work fine.  I have built both the top (main category) and bottom (sub category) lines of my menu using spry with .png image rollovers.
    Now I just need to find out how to make the main category button rollover stay 'down' while browsing the subcategories.  I would also like to get the subcategories to populate upon mouseover of the main category, without requiring a selection.  Now that would be slick : )  In my example above, the 'services' title should be depressed while in that submenu and look like 'landscape design'.
    One minor problem is the space created between my subcategory images.  I can't find the .css or .js that is creating that space.  I've really trimmed down all the .css and do not know where else to hunt.
    Thanks for any advice,
    Jeff

  • Menu Widget Parent & Sub Menu Both Active

    Is there a way in a menu widget to have the parent menu active AS WELL as one of the sub menus under that parent menu at the same time?

    This is a good example of the parent & sub menu being active at the same time while the user's mouse is hovering over the sub menu.... Thoughts on how this can be achieved?

  • How Can I Create A Menu contained some sub-menu In The Find/Browser Form

    I need to create an user defined menu in the Find/Browser Form, this menu`s level is same to "File","Row" and it needs to be contained some sub-menu,What I should do?

    Are you using JD Edwards World or EnterpriseOne?

Maybe you are looking for

  • How do I add a whole album to my ipod?

    All I want to do is move newly downloaded albums from my library to my ipod but it only seems to work if I do it one song at a time! I click on the album, then on 'add to', then on my ipod (I used to be able to add music drectly to my ipod buyt it no

  • Sql server 2008 r2 reportserver integration with sharepoint 2010 datasource credential

    hello, I am using sharepoint 2010 and sql server 2008 r2 and integrated in sharepoint integration mode and i am using windows authentication ,not keberos ,so i deletd negotiate in authentication tag in rssharepoint.config file,but when i tried to cre

  • Kuler is Color and other Important Updates

    The service you've come to know, Adobe Kuler is getting a new name-Adobe Color CC.  We are introducing this new name to better align with Creative Cloud and our emerging family of capture apps - Adobe Brush CC and Adobe Shape CC - which allow you to

  • Booklet Printing on Epson Workforce 840

    I recently bought an Epson Workforce 840.  Booklet printing is an important part of what I do and read that the workforce could handle it.  However, it appears booklet printing isn't supported by the Mac drivers.  Is this true or am I missing somethi

  • Request.getRemoteUser()  to find out login name using NtlmFilter

    can we implement request.getRemoteUser() without using NtlmHttpFilter. Actually, i do not want to uise the filter because i am already using a filter. So can we make any declaration of the Ntlm class and use it such that we can easily access the logi