Read Error During PC Upload

Hi Experts,
When I attempt to attach a document to a PO (ME21N/ME22N) I get an error message say:
Read Error During PC Upload : Include File in PC Application
The funny thing is, some users can make attachments, others cannot. Is this a profile or authorization issue?
Thanks in advance!
SW

Hi Steven,
You cannot attach a file in ME21N trxn using Services for Object. For this you have to come out of Trxn ME21N after saving Po and again go to ME22N trxn code and in Menu System - Select Services for Object and Attach your File.
Be sure the File is not in use and closed.
Reg,
Ashok

Similar Messages

  • PO attachment error - Read error during PC upload

    Hi Gurus,
    I am getting the error when I am trying to attach any file in ME22N, by clicking the services for object button, create attachment, and select the attachment.
    The error message is "Read error during PC upload" and "The attachemnt has not been created".
    The system is upgraded to ECC 6 last year and have not tried this function before.
    Thanks in advance.
    Durai

    Hi,
    They are not using any interfaces (EDI), no idocs. They are using either fax or email and post modes only.
    After saving the PO, we can able to attach the documents by clicking the services for object button in ME22N. But I am not able to attach the document to PO.
    Thanks for your response.
    Regards
    Durai.

  • PO attachment - Read error during upload

    Hi Gurus,
    I am getting the error when I am trying to attach any file in ME22N, by clicking the services for object button, create attachment, and select the attachment.
    The error message is "Read error during PC upload" and "The attachement has not been created".
    The system is upgraded to ECC 6 last year and have not tried this function before. Now the client want to use this functionality.
    Thanks in advance.
    Durai

    Hi Charlie,
    There is no message number appeared. In the bottom message bar " The attachment has not been created" appeared. In the seperate message window, " Read error during PC upload" is on the title and "Include file in the PC application, Try again?, is in the body.
    Hope I clarified your doubt.
    Thanks and regards
    Durai

  • Read error duing PC upload

    Hi everyone,
    I am having a problem when uploading a SAP office attachment. I receive the following error "Read error during PC upload, Include file in PC application, Try
    again?"
    Would anybody have any suggestions to resolve this issue?
    Thank you!

    Hi Jimmy,
    The file you are trying to upload must be open on your desktop. Please close it and theen do  the upload.The issue will be solved.
    Please award points if solved.
    Regards.
    Ruchit.
    Message was edited by:
            Ruchit Khushu

  • [SOLVED] Pacman "config file could not be read" error during Arch ins

    I've been attempting to get Arch setup for a while now, and after having some trouble with partitions, my wireless connecting, and setting up repos and mirrors, which the Wiki helped me solve, I've hit a bigger bump.  While updating the system using pacman as the Beginners Guide says to do, I get errors when I try to continue the update process as follows :
    btw: I'm typing this on a laptop next to my computer
    [[email protected]~]# pacman -Syu
    error: config file /etc/pacman.d/core could not be read
    error: config file /etc/pacman.d/extra could not be read
    error: config file /etc/pacman.d/community could not be read
    :: Synchronizing package databases . . .
    error: failed to updated core (unexpected error)
    error: failed to updated extra (unexpected error)
    error: failed to updated community (unexpected error)
    error: failed to synchronize any databases
    Any tips as to whats going on?  I've tried to created said files, and even insert mirrors into the file, like in the /etc/pacman.d/mirrorlist file but this doesn't seem to help
    Last edited by Windfinder (2008-09-29 20:43:29)

    Glad you got it working.
    I'm not sure what happened in your install but I just finished using an old 2007.08 iso and pacman first starts out with /etc/pacman.d/core, etc/pacman.d/extra, /etc/pacman.d/community ... etc., but I never had your problem when I did the #pacman -Syu after initial install reboot.  The pacman update removes the above mentioned repos and replaces them with a single /etc/pacman.d/mirrorlist.  You must have messed up an initial config file somehow as I couldn't get the same errors you got.  It looks like you had your /etc/pacman.conf file messed up somehow and when you pointed it to the mirrorlist it could finally work properly.  I'll just include my /etc/pacman.conf file and /etc/pacman.d/mirrorlist so you can compare.  NB*  these are from my x86_64 so for 32 bit machines i686 would replace x86_64 in the files.
    # /etc/pacman.conf
    # See the pacman.conf(5) manpage for option and repository directives
    # GENERAL OPTIONS
    [options]
    # The following paths are commented out with their default values listed.
    # If you wish to use different paths, uncomment and update the paths.
    #RootDir = /
    #DBPath = /var/lib/pacman/
    #CacheDir = /var/cache/pacman/pkg/
    #LogFile = /var/log/pacman.log
    HoldPkg = pacman glibc
    # If upgrades are available for these packages they will be asked for first
    SyncFirst = pacman
    #XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
    #XferCommand = /usr/bin/curl %u > %o
    # Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
    #IgnorePkg =
    #IgnoreGroup =
    #NoUpgrade =
    #NoExtract =
    # Misc options (all disabled by default)
    #NoPassiveFtp
    #UseSyslog
    #ShowSize
    #UseDelta
    #TotalDownload
    # REPOSITORIES
    # - can be defined here or included from another file
    # - pacman will search repositories in the order defined here
    # - local/custom mirrors can be added here or in separate files
    # - repositories listed first will take precedence when packages
    # have identical names, regardless of version number
    # - URLs will have $repo replaced by the name of the current repo
    # Repository entries are of the format:
    # [repo-name]
    # Server = ServerName
    # Include = IncludePath
    # The header [repo-name] is crucial - it must be present and
    # uncommented to enable the repo.
    # Testing is disabled by default. To enable, uncomment the following
    # two lines. You can add preferred servers immediately after the header,
    # and they will be used before the default mirrors.
    #[testing]
    #Include = /etc/pacman.d/mirrorlist
    [core]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [extra]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    [community]
    # Add your preferred servers here, they will be used first
    Include = /etc/pacman.d/mirrorlist
    # An example of a custom package repository. See the pacman manpage for
    # tips on creating your own repositories.
    #[custom]
    #Server = file:///home/custompkgs
    /etc/pacman.d/mirrorlist
    # Arch Linux repository mirrorlist
    # North America
    # - United States
    Server = http://mirror.neotuli.net/arch/$repo/os/x86_64
    Server = http://holmes.umflint.edu/archlinux/$repo/os/x86_64
    Server = http://archlinux.unixheads.org/$repo/os/x86_64
    Server = ftp://ftp.archlinux.org/$repo/os/x86_64
    Server = ftp://locke.suu.edu/linux/dist/archlinux/$repo/os/x86_64
    Server = ftp://ftp.gtlib.gatech.edu/pub/linux/distributions/archlinux/$repo/os/x86_64
    Server = ftp://mirror.cs.vt.edu/pub/ArchLinux/$repo/os/x86_64
    Server = http://mirrors.easynews.com/linux/archlinux/$repo/os/x86_64
    Server = ftp://ftp.ibiblio.org/pub/linux/distributions/archlinux/$repo/os/x86_64
    Server = http://mirror.rit.edu/archlinux/$repo/os/x86_64
    Server = http://mirror.umoss.org/archlinux/$repo/os/x86_64
    # - Canada
    Server = ftp://mirror.csclub.uwaterloo.ca/archlinux/$repo/os/@carch
    Well it was an interesting way to kill 30+ minutes.

  • Error during Initial Upload from ECC to CRM

    Hi All,
          I am getting an error while initial upload of BPs from ECC to CRM.
    I have BP groupings defined in  ECC. I had set the filter settings for a particular BP group(e.g. ZSIR). BP upload to CRM was successful. But, when I changed the filter setting to another BP group(ZDAC) those BPs were not copied to CRM.
    what might be the problem ?
    If anyone has any documents on initial & delta upload kindly forward it to me at [email protected]
    Any suggestions would be of great help !!!!
    Regards,
    Ashish

    Hi geetha check for the whther all the bp Data is down loaded or any thing missing after down loading to crm if that is the case due to data inconsistenmcy this ttype of error will occur, so you have to synchronize the both bp data
    manually after delta down loading.synchronization
    Reward
    Venkat

  • Can't sign in to FaceTime or IMessage just keeps reading error during activation

    CCan't sign into FaceTime or IMessage says error during activation help!!!

    Hey June762,
    Sorry to hear you are having these issues with your iPad. If you continue to get activation errors in FaceTime or Messages, you may find the info and troubleshooting steps outlined in the following article helpful:
    If you get an error when trying to activate iMessage or FaceTime - Apple Support
    Cheers,
    - Brenden

  • Powershell: There is no file with URL error during file upload.

    I am trying to put together a PowerShell script that I could use to upload files from a local directory, into a Document Library in a Record Center Site. Here is what my script looks like...
    #Open web and library
    $web = Get-SPWeb $webUrl
    $docLibrary = $web.Lists[$docLibraryName]
    $files = ([System.IO.DirectoryInfo] (Get-Item $localFolderPath)).GetFiles()
    Write-Host "Local Directory:" $localFolderPath
    ForEach($file in $files)
    Write-Host "Looping through files"
    Write-Host "Current file:" $file
    ElseIf ($contentType = "MyContentType")
    #Open file
    $fileStream = ([System.IO.FileInfo] (Get-Item $file.FullName)).OpenRead()
    # Gather the file name
    $FileName = $File.Name
    #remove file extension
    $NewName = [IO.Path]::GetFileNameWithoutExtension($FileName)
    #split the file name by the "-" character
    $FileNameArray = $NewName.split("_")
    $check = $FileNameArray.Length
    #Add file
    $folder = $web.getfolder($docLibraryUrlName)
    write-host "Copying file " $file.Name " to " $folder.ServerRelativeUrl "..."
    $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stream]$fileStream, $true)
    $spItem = $spFile.Item
    write-host "Success"
    #populate columns
    $spItem["Application Number"] = $FileNameArray[0].ToString()
    $spItem["Site Number"] = $FileNameArray[1].ToString()
    $spItem.Update()
    $fileStream.Close();
    Each time I run my script, I get this error message 
    Exception calling "Add" with "3" argument(s): "<nativehr>0x80070003</nativehr><nativestack></nativestack>There is no file with URL 'http://myRecordLibrarySite/myRecord Library/12587_B2317.PDF' in this Web."
    At C:\powershellscripts\Upload-FilesIntoSharePoint.ps1:72 char:6
    +                     $spFile = $folder.Files.Add($folder.Url + "/" + $file.Name, [System.IO.Stre ...
    +    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
        + CategoryInfo          : NotSpecified: (:) [], MethodInvocationException
        + FullyQualifiedErrorId : DirectoryNotFoundException
    I have not been able to nail down why the script is failing. Any ideas why? Thanks for the help.

    I just figured out the issue with adding the file. I went in this direction, and my code has progressed forward.
    $folder = $web.getfolder($docLibrary.rootFolder.URL)

  • Error during ecatt uploading

    Dear Expert,
    when i m running the test configuration in SECATT,
    i m getting the following error.
    "error when reading the file 'path' "
    i have chkd the file, i feel that file is ok as per my knowledge.
    what may b d solution ????
    can anybody suggest.
    thnx in adv.
    ashis

    Hello ashis,
    Keep the file in the nearest location like , desktop ..instead of some folders.
    And reduce the size of the upload file , if you  are using a pretty huge file.
    I had encountered the same problem some months back in SCAT...i tried the above it worked..so may be useful for you.
    regards
    Sandeep

  • Reading content during SMB upload

    I need some urgent help.
    I created the MyFolder class and override the extendedPreAddItem method to perform a validation when a document is uploaded to the folder. Basically, I have to inspect the content of the document being uploaded and, if it is correct, I let it to be uploaded; else, I raise an exception. Everything works fine, except when the file is uploaded through the SMB protocol, which is my main need. With SMB, the getContentSize() always return 0 and the getContentStream() always return null. How could I get the content of the file being uploaded via SMB in an override????? My code follows.
    public class S_MyFolder extends S_TieFolder {
    public S_MyFolder(S_LibrarySession session,
    S_LibraryObjectData data) throws IfsException
    super(session, data);
    public S_MyFolder(S_LibrarySession session,
    Long classId) throws IfsException
    super(session, classId);
    protected void extendedPreAddItem(
    OperationState opState,
    S_PublicObject obj,
    S_LibraryObjectDefinition def)
    throws IfsException
    super.extendedPreAddItem(opState, obj, def);
    if ((S_Document)obj).getContentSize() > 0) {
    // do something with the content
    // OK with FTP or Java API
    else {
    // with SMB, always get here
    throw new IfsException(100001);
    Please, someone help me. Thanks a lot.
    Daniel Viero
    iProcess Solucoes em Tecnologia
    [email protected]
    Porto Alegre, RS - Brazil

    Hello Ben,
    I'm sorry that FTP has been proving unstable for you. We are aware of some issues with our current FTP implementation and plan to address them in future versions of Muse. For now, if you are seeing problems with FTP locking up during publish the workaround of exporting the HTML and using a third-party FTP client is what we reccoemend.
    Thanks,
    Justin

  • Error during File upload into BI IP

    Hi,
      I have followed the steps outlined in the How-to Guide for loading files into BI-IP (NEtweaver) as posted by Marc. When I execute the same, I get the following error:
    System error in program CL_RSR_FIPT_VAL2SID_PREFETCH and form BEFORE_TRANSFORM-01- (see long text).
       I am not sure why this is happening and also about what should be done! Any ideas are most welcome!
    Thanks and Regards
    Sriram

    Hi Sampath,
    Please ensure you are on SP 15 patch level , else if you are on SP 14  then apply note 1070655 - Termination msg CL_RSPLFR_CONTROLLER =>GET_READ_WRITE_PROVIDS
    b] Apply Correction Instruction 566059 [i.e: in Object - CL_RSPLFR_CONTROLLER GET_READ_WRITE_PROVIDS,
    delete the block: l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = p_infoprov ).
    and insert block - l_r_alvl = cl_rspls_alvl=>factory( i_aggrlevel = i_infoprov ).
    Apart from this  ensure at Planning function level create the rows as like in the flat file. Also give correct parameters to the skip header and other functions.
    Hope this helps
    Raja

  • Error during MB11 bdc-upload

    hi experts.
    I am using a BDC-UPLOAD program for MB11 but there is one error during an upload.
    Here is a procedure which i am following:
    I have created an upload file, which is tab-delimited format. In which such information exists:
    01.12.2008 12.12.2008 561 d920 m920 536319000 1 PC 100
    Now when i am uploading this file using movement type P61 or 561 a same error occurs:
    Formatting error in the field MSEG-EXBWR ; see next message
    Make an entry in all required fields and this is a required field, its a currency type field but i have even checked it by replacing it into char & num.
    Is there any standard upload program for STOCK UPLOAD using MB11? If there is any one who can send me a solution.
    thanks in advance.
    Regards,
    Yahya Shoaib.

    OK...I think you have declared the internal table field for that value same as the standard table right??
    Now, create a variable with char and then move the value to that char variable and then pass it to the subroutines...
    Ex:
    loop at itab into wa.
    var1 = wa-amount
    perform bdc_field using mseg-exwbr var1.
    endloop.
    Now, I think it will pick up the value.
    VIshwa.

  • Trying to burn my project to a DVD using iDVD, but keep getting "Error during rendering/encoding of the menus/slideshows. The burning process has been canceled." How do I fix this?

    Just mad a movie and trying to burn it to a DVD but keep getting an error message.  It reads:
    "Error during rendering/encoding. There was an erro during rendering/encoding of the menus/slideshows. The burning process has been canceled."

    Enable Show TV Safe  Bengt Wärleby  lists items to consider about encoding issues in this topic:  Multiplexing Error: Apple Support Communities
    OT

  • Error "A web exception has occurred during file upload" when trying to import ESXi image file into Update Manager

    I'm encountering this error and not sure how to fix, I'm quite new to vCenter so please bear with me.
    I'm trying out vCenter 5.1 with Update Manager 5.1 right now.  No license key has been entered and I still have 50 odd days to try it out.
    2 ESXi hosts are being managed by this vCenter, and they're both running ESXi 4.0
    I'm looking to use Update Manager to try to upgrade the ESXi 4.0 hosts to ESXi 5.1
    I downloaded the image file VMware-VIMSetup-all-5.1.0-799735.iso from VMWare website, and is looking to import it using the Update Manager so I can update the ESXi hosts, but I keep on getting the error:
    File name:     VMware-VIMSetup-all-5.1.0-799735.iso
    Failed to transfer data
    Error was: A web exception has occurred during file upload
    I tried importing it by using vSphere client to connect to vCenter server both remotely and locally, with firewall disabled.
    I've read http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1026602
    I've disabled firewall, and there is no anti-virus program on the server.  I've also restarted the machine several times, to no avail, I didn't reinstall update manager because the whole Windows and VCenter installations are clean from scratch.
    I logged into the vSphere Client using Active Directory credentials, and I've made all Domain Admins (which my account is a member of) part of the administrator group on the vCenter server. I can't log in using [email protected] because it tells me I don't have permissions for it, I still haven't really had the chance to figure out why that is and not sure if that makes a difference.
    Also, I'm fairly certain I'm using the right image file, as I've burned some DVD's used that image file to upgrade some other ESXi hosts.  Unless there's a special image file I need to download?
    I'm at lost on what I can do to make it work.  Please advise.
    Thanks.

    The ISO file you mentioned is the one for vCenter Server. What you need is the "VMware-VMvisor-Installer-5.1.0-799733.x86_64.iso" (or VMware-VMvisor-Installer-201210001-838463.x86_64.iso) for the ESXi host.
    André

  • Problem: An error occured during the uploading process.

    Hello!  I've searched around but I am having difficulty finding a solution to this problem.
    I am trying to upload videos through Adobe Premiere Elements 9 to YouTube, using the preset options in the share tab.  This worked previously without issue, but then one day I continually ran into an error stating "Sorry, an error occured during the uploading process.  Please try again later."  However, it eventually started working.  It is now a few weeks later, and I am having the very same issue.  I am unable to upload to YouTube or any other service through the Share tab.  Even loading the software itself, the opening splash screen is unable to grab my Adobe ID.  It never stops "Gathering User Info..."
    Steps I have tried:
    Going to Edit -> Preferences -> Web Sharing and hitting the refresh button to update settings.
    Checked router settings.
    Enabled DMZ on router and linked it to this specific computer.
    Rebooted PC and router, and tried updating the Web Sharing settings multiple times.
    I honestly do not believe it to be a router issue, especially since it is currently in DMZ mode and I have had absolutely no trouble with any other software.  This has continued to baffle me though, and finding help is difficult.  Searches keep giving me encoding settings for YouTube videos, and few results pertain to this particular issue.
    I am aware I could export the video normally and upload through YouTube that way, but on DSL, my upload speed is pretty terrible for a high quality video.  The YouTube HD setting has been great for me in the past, as files are small but still look great online.  I would really like to get it working again, both for ease and convenience for simple projects.
    If anyone has any ideas as to what could be causing a problem, I would be greatly appreciative of any advice.  In regards to the project itself, there is no real editing being done at this point, as I am trying to eliminate any possibility of error elsewhere. I opened a new project, added a video clip and went directly to upload it, resulting in the error above.
    I don't believe it matters in this situation, but just in case:
    Windows 7
    AMD Phenom II X4 820 - 2.80 GHz
    6 GB RAM
    Radeon HD 5880 1GB
    Connecting through a Netgear WNDR3400 router, standard DSL connection.

    Sorry, not seeing where to edit my original post.
    Just wanted to add, that I am able to visit both the Photoshop.com website, as well as YouTube through my browser.  So I am not being blocked somehow to those particular sites.  It only seems to be through the software that I cannot connect to any of the online services to upload videos to.
    Additionally, the only virus software running is Microsoft Security Essentials.  It has never raised a flag before with this software or caused interference in the past.  I do not use Norton or any other service which are known to interfere with programs often.
    Just a quick example as well, pinging Photoshop.com through the command prompt shows I am getting through just fine.  As you can see in this image though, it cannot seem to ever connect and grab my user information.
    http://i.imgur.com/S53xN.png

Maybe you are looking for

  • Strange behavior when using servlet filter with simple index.htm

    I am new to J2EE development so please tolerate my ignorance. I have a web application that starts with a simple index.htm file. I am using a servlet filter throughout the website to check for session timeout, redirecting the user to a session expira

  • How to load SQL scripts from a text file.

    Hi, i tried several time to load a text file/SQL script with 10 different tables and data, but 10g Express doesen't allows me to do that, any one can direct me or point out to me what i should do or do i need to adopt any special method to to get thi

  • A word on external monitors

    I was thinking of investing in an external monitor for my 3 year old 17" MacBook Pro, but not real sure on how to proceed. The MacBook Pro has a maximum display resolution of 1920 x 1200, so would it be logical to assume that I should select a monito

  • Jdbc help

    Hi all, When I tried to retrieve values from database like text and integer values ,I can't assign to the text box .Plz can anyone help me. here is the code import java.sql.*; import java.io.PrintStream; import java.awt.event.*; import java.awt.*; im

  • SSO Problem in firefox 1.0.6 browser

    Hi. I installed firefox 1.0.6 browser and I try to download client certification from http://service.sap.com/tcs. (I already have client certification for IE and It works) If I click "apply for an SAP passport" in sapnet, client certification downloa