Report for viewing FB60

Hi,
I would like to know the t-code for viewing a list of all documents posted via FB60.  I only want to see what was posted with just FB60.  I do not have access to SE16N or SE16.
Thanks,
Kevin

Hi,
You can use the field "Transaction Code" in the dynamic selection of
FB03 "Document List"
Or in FAGLL03
Or in FBL1N/ FBL3N/ FBL5N
etc.
Here in this field "Transaction Code" give the value FB60.
Regards,
Gaurav

Similar Messages

  • Report for viewing Sales order no against delivery date & actual GI date

    Hi Experts,
    Is there any report for viewing Sales order no against delivery date & *actual GI date*
    Because in VL06F , i can only able to get planned GI.
    Please guide regarding the same where i can get 'ACTUAL GI DATE ' against above combination .
    Regards,
    Sujit S.

    dear Hrishi,
    i followed your suggestion, but couldn't get desired results,
    here i can get planned GI date, where i wanted to get Actual GI date for complted deliveries,
    thanks for your valuable reply.
    @ G. Lakshmipathi ;-
    i think i will need to develop z-report for fetching the data from the tables
    VBAK (to get sale order reference) and
    LIKP (to get delivery and actual GI date)
    thanks for your reply,
    Regards,
    Sujit

  • Report for viewing credit limit block released documents

    Hello All,
    Our client's requirement- credit limit check to be carried out and authorised persons can release the blocked orders.
    But is there any report at month end to see how many documents were released and who released them  Is there any standard report for viewing these or ABAP has to develop them?  VKM2 transaction- released SD Documents would not show any released documents once billing is done i.e, once the sales documents is released it cannot be known who released it and when, how to track this?. so what can be the solution for this? Please suggest
    Regards,
    RAJ

    Dear Raja,
    Use VKM4 t code.
    You can see both credit released sales orders and deliveries.
    Put Overall credit status as D.
    You can see how much value was released, when it was released. But with which user id it was released you cant see it.
    Regards
    Abhilash

  • Report for Viewing "Dotted Line Reportings"

    Hi All,
    Which standard report is used for viewing the "Dotted Line Relationships"? Kindly help...
    Regards,
    Shruti B.

    Hi Shruti,
    well ,if there isnt a standard one that meets your req,kindly offer customised solution
    T777E
    T778V are some tables you may want to check for relationship and allowed reltionsships
    088 is dotted line reports to
    please refer to these threads aswell.
    Dual Reporting
    SAP OM Dotted Line relationship
    No Worries
    KG
    Edited by: SAPenjoy:) on Sep 7, 2010 11:54 AM

  • HR Report for viewing data transferred through CO1P transaction

    Hi,
    I have query here about HR data transfer which we do through CO1P transaction. How we can view these data transferred through CO1P in HR module i.e. any transaction or report is available from HR side which can give fair idea values which are passed through PP are visible in HR report / table.
    Your precious reply in this matter will be highly appreciated.
    Thanks in advance.
    Regards,
    Tejas Pujara

    Hi Friends,
    I gone through EVHR and another table LSHR as well which is saving entries confirmation timings i.e. time events and time tickets. But to my surprise, respective time fields entries are shown with 0 values in both tables. I cross checked with AUFNR that AFRU entries contain values for standard values i.e. set up , machine etc confirmed properly and updated in AFRU.
    But same AUFNR values transferred through CO1P are not updated with those values in HR tables.
    Any body can through light on this,
    Alternately, let me know in case I need to post this in HCM forum. Kindly suggest me exact where I need to post this since I found so many sub-categories under HCM section of SCN.
    Thanks & Regards,
    Tejas Pujara

  • Std report for viewing emp working hours

    Hi all,
    I want to know what is the standard report available in HR module to view the Employee aproved working hours and Unapproved working hours...?
    Regards,
    Shanthi

    Hello,
    maybe you can find this data, at the PT62, PT64, PT65, PT90_ATT and PT91_ATT TRANSACTION CODES.
    Regards

  • Activity report for viewing user login

    Hi
    Is there a standart report which shows how loged in to SAP during the passing year ?
    Thanks
    Ziv

    hi,
    use STAD,STAT,ST03N transactions.

  • TDS Report for Remittance

    Hi All,
    I there any Standard report for viewing the  total amount of TDS to be remitted or due for remittance or is there any other meathod for fing out the same Kindly guide me
    Regards
    R.Ramakrishnaraj,

    Hi Ashok Kumar,
    The scanario is I posted one Vendor Invoice through FB60 and when I execute the report I am getting that w/tax amout is outstanding.
    BUT when I reverse the Invoice document and When I execute the report in the total coloumn it is not showing the " ZERO " balance.
    In the same time I am not getting + / - indicator in that coloumns.
    My client is asking when I reverse that document that balance should become " ZERO ". so that he can see the outstanding.
    Its very urgent.
    Kindly do the needful.
    Looking forward for an early and positive reply from you.
    Thanking You,
    Regards,
    K. S. Sai Kumar

  • How to get report for deleted line items from sales orders

    Dear FRIENDS,
    please infirm the t.code or report for viewing the deleted line items from sales ordrers.
    Kindly do the neeedful.
    regards,
    N.M.PAWAR

    Hi,
    With transaction SE16 you can view table CDHDR for header changes and
    CDPOS for item changes. This includes deletion.
    OR
    GO to VA03 - Display Sales order -> Put order no : don't press enterbutton. -> Go to Enviornment -> changes -> You will get details
    Date ItmNo. SLNo Action
    Hope this help please close the thread if answers

  • Standard Report for base Unit of measure & alternative unit

    Hi experts
    Please give me standard reports for viewing base Unit of measure & alternative unit for a material code.
    Regards
    sandeep

    Dear Mr Sabine
    I observed that you have closed lots of thread without a proper solution. How can you do that? Or what propel you to close the thread? The closure should be done by the person who have created the thread. Till he/she gets a proper reply or the problem is resolved why to close. It may take some time, some days also. Delay reply should not be the reason for closure.
    So please avoid from closing unilaterally.

  • A report for the changed document histroy ...

    Hi experts,
    I want to write a program which can display all the delivery documents changed history ...
    Of course i only care the delivery number , qty & date ...
    As i know there has one TCODE : VL22 can display only one delivery document's detail .
    but it is not easy to looking for some delivery documents at the same time ...
    if i want to display all the delivery document how to do it ???
    Has some BAPI i can use in here ????
    Best Regards,
    Carlos

    You can refer to the tables - CDHRD and CDPOS for this.
    In CDHDR pass the Object class = 'LIEFERUNG'
    and  Object value = Your Delivery Number .
    You will get the list of Change Documents. With same information you can go to CDPOS to find out what exactly was changed.
    You can use the following FMs also -
    CHANGEDOCUMENT_READ_HEADERS
    CHANGEDOCUMENT_READ_POSITIONS
    Hope this will enable to you to come up with your own report for viewing history of multiple Deliveries.
    As these CDHDR and CDPOS contains all the change related informations , the performance of your report might be not very impressive if you try to do a wildcard search. Make sure you have some Delivery Numbers with you before you go into CDHDR/CDPOS.

  • Special report for tracking confirmations

    Hey,
    i am adding internal processing activty in my proj for tracking amount of work confirmned only.. and not for costing, cap pllnning purposes,,,, i can provide a report of cnfmations to ma customer, but the demand rite now is like this as follows....
    suppose the work is 100 kms digging... my first km is named position 1200, after 10 km i would be at position 1210 and so on... can we achieve this in ps ... i am thinking to feed this data in some user field  in wbs and get some abap report to achieve the same.. can i do this ... or is there some other solution....  also i am not able to see remaining work in the report.. how to do the same.....pls assist
    Rahul

    This can be achieved by using  partial confiration, Final confirmation & degree of processing.
    The degree of processing of a partial confirmation inidates to what percent the activity has been processed. System calculate degree of processing from the proportation of actaul amt of work that has already been confirmed for an activity  to it's planned or forcasted total work.
    you can also define alternative degree of processing manually in confirmation.
    you can also use workcenter actaul work &  remaining work ( forcasted ) fields in partial confirmation to document which workcenter has performed which degree of work & how much still to be performed.
    you can use CN48N report for viewing the confirmation.
    Prerequisite for Actvity confirmation is
    the activity must be released
    control key of the activity must allow the confirmation.
    In customising you must have to defined the confirmation parameters which controlls the properties of the confirmation.
    Regards
    Nitin

  • Report for List of Park Doc in FB60

    What Want a report for  List of Park Doc in FB60?

    Hi
    You can see the it in FBV3 and click on the list , here you can see the complete list based on the parameters entered by you.
    you can post it using FBV0.
    Anand

  • Scheduled Discoverer report link for viewer in portal

    Hi,
    When a link for scheduled report for plus users is created in portal Oracle suggestes the following. This is good since it does not need the run number and the same link will work for all reruns.
    http://<host.domain>:<port>/discoverer/plus?cn=cf_a156&opendbid=SALES_ANALYSIS2&sheetid=42&workbooksource=Scheduled
    whereas for opening a scheduled workbook result in viewer the link needs the run number which prevents using the same link for every run.
    Do anyone found a way to workaround this
    Thanks for the help
    Jay

    Hi Jay
    I can see that you've had this posted for a little while so I thought I would at least let you know that I've read it. I'm afraid the answer is not what you hoped though as I don't know of a way off the top of my head to do what you ask.
    Sorry, regards
    Michael

  • Create a mobile application for view BW reports.

    I want to create a mobile application with MDK for viewing BW reports. It is possible ?

    Hello,
    I have a similar kind of requirement here.
    I need to show BW data on wireless device...via Portal.
    This BW data is a query, which is created using WAD.
    In normal case, we just use the SAP BW Report iView, stick the Bex query in it and its all done. But in this case....how am to go about this...?
    Ive read about Mobile WebDynpro but want to know that....Mobile Web Dynpro is an oline approach, does it mean that user will be able to drill down from the Bex query??
    Awaiting Reply.
    Thanks and Warm Regards,
    Ritu

Maybe you are looking for