RH_RELATION_MAINTAIN Authorization

Can I disable the authorization check in RH_RELATION_MAINTAIN function module?
Thanks
Alfonso
Moderator message: sorry, bypassing authorization checks is not supported in the ABAP forums, please apply for the missing roles instead.
Edited by: Thomas Zloch on Jan 25, 2012

Mark,
There is a prequisite that must be completed before you can transfer OM data to PA using RHINTE30. This can be done by running the program RHINTE10.
I guess you will have to create an RFC for each of these Programs.
For creating the function module, you will have to see the Program's selection screen, identify what fields you need to fill & pass them as parameters to the function module. Inside the function module, you have to SUBMIT RHINTE10/RHINTE30 using those values.
Regards,
Suresh Datti
P.S. PL reward all helpful answers

Similar Messages

Open and close posting period authorization control TCODE: S_ALR_87003642

HI All,
Is there any chance to control the user to open and close another company code posting period variant in TCODE: S_ALR_87003642.
In our system we are using the same client for different countries. So user can able to change the other country company code posting periods.
We would like to control either on the country (or) organizational unit(company code) (or) posting period variant so that user can only open/close their country / company code posting periods.
Our present authorization role for open and close posting period contain the auth.Obj. : S_TABU_DIS.
Please share your knowledge if you come across this problem..
Thanks in advance..

Hey Sandhya,
Congratz, this can be done using linbe item authorization with the object S_TABU_LIN.
Field ORG_CRIT - Value 02
Field ORG_FIeld1 - Value ZT001B
We have successfully done it in our client.
You need to contact your BASIS consultant for this.
Thanks,
Nitish

Analysis Authorization in BO 4.0 Webi report

Hi All,
I am using BO 4.0 and creating connection from Information Design tool to a BW query using BICS client. This connection is then published to CMC.
We are using SAP authentication and importing the roles from BW system. We have added profiles to this role and these profiles have Analysis Authorization set on Company Code. So one user can access data to one company code and vice versa. Now this works well in Bex Analyzer, but if I try to create a report in Webi, the analysis authorization fails. I went through the forum before posting this question and I found that is in 3.1 version and in most cases using SSO in universe connection solved the problem.
However in 4.0 I am using BICS client and followed the same processes to create a connection but for some reason it doesn't work ? Is this suppose to work differently in 4.0 ?
I have tried:
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
3. Publish the connection to CMC with my Enterprise and SAP ID and in both cases it doesn't work.
Please let me know if anyone encountered a similar issue and what is the best method to resolve this.
(BO 4.0 no service pack or fix pack installed on the system yet)
Thanks - Appreciate your help !
Prasad Rasam

Ingo,
1. To create connection in Information Design tool using SSO, selecting user ID and password. It doesn't work.
>> Correct you need to setup you OLAP Connection with SSO.
>>> What I meant was I created the connections using both the methods, Using SSO it allows me to create a connection. The ID which I am using to create a connection has Admin access to BOBJ system. When I login as a regular user to create a Webi report and select this new connection, it throws an error message 'The DSL Service returned an error: com.businessobjects.dsl.services.workspace.impl.QueryViewAnalyzer$CannotGetCubeFromConnectionException: Cannot get the cube from the connection'
Using the other method to create a connection with User ID and password, I can create a connection and with the normal user login I can connect to the BW query but Analysis Authorization doesn't work.
Ingo : Could you be more specific what you mean here with the different users ? When you say "regular" user are you referring to an SAP credentials or SAP BusinessObjects Enteprrise credentials ?
2. Checked the Bex query and it already has Company code as a Characteristic restrictions (I have made it a mandatory variable).
>> The variable in the BEx query needs to be an authorization variable.
>>> This has already been set as Authorization variable. There is still a question here. If I select the variable as Authorization variable, I cannot set the other parameters in the query properties such as Mandatory variable (as this is greyed out).
Ingo : What other parameters would you like to configure ? Could you perhaps describe the scenario with more details ?
regards
Ingo Hilgefort

Analysis Authorization Issue 7.3

Hello Friends,
System BW 7.3, Currently there are 80 odd analysis authorization objects
We want to introduce a new info object (GL Account) to be authorization relevant, ( there are few objects in the system which are already authorization relevant in the system with proper analysis authorization objects and they are working fine)
Things done, made the GL Account object authorization relevant in RSA1, Created 2 analysis authorization objects with GL Account and TCT objects and one with hierarchy restrictions and one open access.
Added this object to the user in addition to its already existing authorization objects. Created authorization variable in BEx.
Some how the authorization is not picked up and it gives us all the values in the report. But if I add the GL Account info object to the existing analysis authorization objects then it works fine.
I do not want to change all the existing analysis authorization objects to add GL Account.
Your inputs are most welcome.
Thanks
Ed.

Gajesh- I have added the new analysis authorization object to the user in RSECadmin.
Subhendu- Problem statement: What are the steps involved in making a new info object(GL Account) authorization relevant. Authorizations are given at hierarchy level. Can we create a new analysis authorization with GL Account only or do we have to add it to every existing analysis authorization
I have done the following steps
1. Made the GL Account object authorization relevant in RSA1,
2. Created 2 new analysis authorization objects with GL Account ( with hierarchy restrictions) and TCT objects and one with GL Account open access.
3. Added this object ( which has restrictions) to the user in RSECADMIN, in addition to its already existing authorization objects.
4. Created authorization variable in BEx.
5. No existing analysis authorization objects have been changed.
When I test the report, It does not restrict based on the hierarchy that I have given, it gives open access.
But If I add GL Account with restrictions to the existing analysis authorization object, it works good.
Guess I am missing some thing here.
Do you need any other screen shots.
Thanks
Ed.

Analysis Authorization Issue

Hi:
I created an analysis authorization ZCO_CODE to trstrict it by a company code.
I added following objects in authorization with values.
0COMP_CODE = 1000
0TCAACTVT = 03
0TCAIFAREA = *
0TCAIPROV = *
0TCAVALID = *
Then I created a role Z:00:BW_REPORT, where I added following authorization objects S_RS_AUTH and restricted it by value ZCO_CODE. Then I assigned this role to a user test01.
When I execute a program RSEC_MIGRATION for this specific user, I do not see authorization object ZCO_CODE on 2nd step of this program. Any Idea Why? I think this object should show up as I want to migrate this specific object.
Help will be appreciated.

Hi Sachin:
Okay here is my issue.
I have a Reporting authorization Object created earlier which is ZCOCODE. I though I'll have to create a new Analysis authorization object e.g. ZCO_CODE and then restrict it with other chars. as mentioned in Marc Bernards presentation and then you have to migrate it.
In selection list I can see old Reporting authorization object. If I select it and use option "Enhance existing profile" then It will update profile and not role? right....
How can I see whether it has updated existing profile?????
Do I need to create new Analysis Auth. for Company code or I can use old Reporting authorization for company code?
For testing purpose, I created a test user and assigned all reporting roles but It will not show up in RSEC_MIGRATION step???

BW Analysis authorization issue on cost center range

Hello BIW security experts
I have a problem where I created an analysis authorization on a cost center range and it looks like the interval is not working. The report is just a list of cost centers (demo to users to prove that analysis authorizations work in order to skip 2 managerial cost centers.
. Cost centers are numeric. Example: 2000100. In the drop down list they appear as such.
. I want to have the following cost center range: 1000000 to 1000771, 1000773 to 2000771, 2000773 to 9999999.
Thereofore 1000772 and 2000772 should not appear in the list.
. In the analysis authorization I have put the 3 ranges above on 3 separate lines. 'BT' is the operator. The cost centers have been selected from the drop down list.
Results: I get only 1 record from the report.... 2000772. (which is one I want to exclude..
Steps tried to debug:
. When I put a list of cost centers in the analysis authorization on separate line with the 'EQ' operator, then the report works.
. I tried putting ' ' delimiters since cost center is a char field but it fails.
. I tried adding leading and trailing zeros to fill up the char(10) but no luck.
. I tried creating a hierarchy with the interval and put it in the hierachy auth. tab and it does not work either. It gives the same number of records than the first step.
. A hierarchy with single values work.
I do not know what else to try..
Thanks.
YB.

Good morning
Here it is from RSECVAL
ZCC_TEST     0COSTCENTER                    I       BT        1000000                                                      1000771
ZCC_TEST     0COSTCENTER                    I       BT        1000773                                                      2000771
ZCC_TEST     0COSTCENTER                    I       BT        2000773                                                      9999999
ZCC_TEST     0COSTCENTER                    I       EQ        #
ZCC_TEST     0COSTCENTER                    I       EQ        :
ZCC_TEST     0INFOPROV                         I       CP        *
ZCC_TEST     0TCAACTVT                        I       EQ        03
ZCC_TEST     0TCAIPROV                         I       CP        *
ZCC_TEST     0TCAKYFNM                       I       CP        *
Thank you for your help.

BW Analysis authorization issue... need help urgently....

We have one BW query which is pulling data from Contract Division info-object. Now this report does not variable selection object so it is pulling data from all values of Contract Division. Values of Contract Division are CNC, CNS, CNE and CNL.
Now we have created an analysis auth. object called z_es_3 and added Contract division info-object. Now we have added that z_es_3 into role and given value to CNS. now when we are running report, we are getting No Authorization error. When we are giving * value in z_es_3, it is running fine.
Now we have to restrict report to contract division. please help.
Thanks in advance

Are you running unrestricted search on Contract division in your queries? You should restrict it to value which is maintained in the authorization for the InfoObject.
Also please run the analysis authorization trace from RSECADMIN. That will give you a clearer picture of what is wrong.

BW Analysis authorizations issue in BO Webi Report

Dear All,
I have one webi report which is on BEx Query-universe.
Query has 6 authorization variables with ready for input(optional).
User has authorizations for all 6 fields.
But when we execute the webi report it is throwing error message like" query do not retrive data"
One of the 6 authorization fields has only few values , when we give " * " to this field the user can able to execute the report.
Could anybody tell me what is need be done here
regards
mhreddy

Hi!
Probabily the combination of authoriztions funcions are executing considering "and".
See your configuration to considerer "or".
Test one by one.
bye

Can I authorize 2 apple IDs on one computer?

I'm new to the communities so please bear with me if I post this inappropriately.
My husband and I both have iphones. My two children have itouchs. My husband has an ipad. We also have numerous ipods.
We have two computers in the house. When my husband first bought an ipod, we had a PC. All of his devices have always been synced on the PC using his apple id. When I got my iphone, I synced on our MAC using my apple id. When the kids got itouches, they synced on the MAC using their apple id.
We discovered that anything the kids and I purchased on itunes on the MAC is available to all of us.
We would now like to use home sharing. To do this, both computers must be authorized to one apple id. If the PC is deauthorized for my husband's apple id, I understand he will lose his purchases on the PC (or at least they won't be available until he authorizes it again).
I understand that an apple id may be authorized on up to 5 computers. But what about multiple apple id on one computer???
My questions are basically this...
Can we authorize 2 or more apple id on one computer?
Can I authorize my apple id on the PC and have my husband's apple id remain authorized on the PC?
Can my husband's apple id be authorized on the MAC and my apple id remain authorized?
Can the kids apple id be authorized on each of the PC and the MAC?
Can we have 4 different apple id authorized on a computer at once?
Will authorizing my apple id on the PC de-authorize my husband's apple id?
How's that for asking the same question in lots of different ways? I have seen a lot about a computer using the same id multiple times but nothing about whether I can authorize many different ids on one computer at once.
Thanks for the help.

Each person in your home can have their own Apple ID provided it is tied the their own separate email address.
iTunes permits up to five authorized computers connected to a single Apple ID: iTunes Store- About authorization and deauthorization.
For this all to work well, however, each user in your household should have a separate user account on the computer they commonly use.

How can i authorize music from one apple id acount to another

how can i authorize music from one apple id acount to another? My IPhone 5 wont play my songs that were purches from my old apple id account

timss22 wrote:
how can i authorize music from one apple id acount to another?
You cannot. iTunes purchases remain on the iTunes account they were purchased with.
My IPhone 5 wont play my songs that were purches from my old apple id account
So just upload them from iTunes.
You have mulitple AppleIDs?
Why?

How can i get the itunes store authorization on a windows 7 laptop

i need help big time please. i am about to either throw my laptop because itunes is not authurizing my dell windows 7 laptop

Hello there, jeffrodgers74.
The following Knowledge Base article goes over a few of the reasons iTunes may continually prompt for authorization:
iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
http://support.apple.com/kb/ts1389
Although all of the topics are relevant, most people find the following section to be the culprit in most cases:
Authorize using the correct account name
The items you are trying to play might have been purchased using a different iTunes Store account. To determine which account was used to purchase an item, follow these steps:
Select a purchased song in your library and choose File > Get Info.
Click the Summary tab. Note the Account Name that appears in the list. This is the account name (Apple ID) you will need to use when authorizing your computer to play this purchase.
Note: The account name that appears is the one you used when purchasing the item and does not change if the account name (Apple ID) changes.
If you've authorized the Apple ID that is shown in the Summary tab, you can check the purchase history for that Apple ID from Store > View My Account. If your purchase history does not reflect the purchase of the items in your iTunes library, consider any other Apple ID you may have created, and authorize the computer for your additional Apple ID.
If you forgot the password to one of your accounts, you can recover it using Apple's password-recovery website.
Thanks for reaching out to Apple Support Communities.
Cheers,
Pedro.

How many computers can you authorize with one serial number?

Hey guys.
I'm thinking about buying a 2nd Mac, but I'm just curious how many total computers you have authorize Logic studio on at one time (my guess would be 3 but I hope more).
Please let me know if you can.
Thanks,
Nathan

I'll copy my post from the other thread:
I don't know for the others but in my retail package ((not upgrade) I found two serial numbers. Though I haven't got time yet to try the second serial number on my MacBook, my logic says that with two different serials I could run both macs simultaneously and be on the network. But, my logic fails so often so it's better to shut my mouth, install Logic on MacBook and come back here again.

Is there a way to authorize more than 5 computers. We have three macs and 5 pc's in the house.

Hello, I have a MBP (mid 12 model), a brand new MBA (mid 13), and Mac Mini, four laptop PCs and 2 more Desktop PCs (I have teenage daughters and my wife)...
I intend for one of the PC's to be a "server" I have a large library that certainly does not fit on the MBA, or the MBP. To share the library the client has to be authorized.
I am currently using all of my authorizations... is there a way to get more? (I can't move content to another account I am assuming...)
Thanks in Advance,
Chris

iTunes Store: About authorization and deauthorization - http://support.apple.com/kb/HT1420 - and another helpful post: https://discussions.apple.com/message/17828050
"You can authorize up to five computers with your Apple ID." I have not heard of a way to get more. They probably set up a limit so people don't go around and authorize all their friends' and relatives' computers to one account, and somehow arrived at the number 5 to limit (probably because most families won't have more than one computer per person and 2 parents + 2.5 children rounds up to 5).

Error in Opening a query after Authorization.

Dear Experts,
in a requirement to restrict the users to access some specific queries only I have created the role and assigned some queries to those role in PFCG. The user is able to see only the authorized queries when he login to BEx Analyzer . Now the problem is that when he opens the query instes of getting the prompt for variable values entry he is getting some message as
" Error in specifying the value for variable for Fiscal year and plant."
however the query is opened success fully with my ID which has all authorization.
in Role maintenance I have provided following authorization to the user .
1. Business Explorer - Global variables
2. Authorization Check for RFC Access
3. Transaction Code Check at Transaction Start
4.BI Analysis Authorizations in Role
Business Explorer - Components
Business Explorer - Components: Enhancements to the Owner
Business Explorer - Enterprise Reports
Business Explorer - Folder View On/Off
Data Warehousing Workbench - Hierarchy
Data Warehousing Workbench - InfoCube
Data Warehousing Workbench - InfoObject
Data Warehousing Workbench - MultiProvider
Data Warehousing Workbench - DataStore Object
Authorization Object for RS Trace Tool
5. Business Explorer - Variants in Variable Screen
could please some one tell where i am missing , are what is wrong with it.
Thanks !

you may wish to try executing the queries using the RSECADMIN and analyzing the log for the same.
Hope it Helps
Chetan
@CP..

Authorization error while opening a query

Hi All,
We have a new installation of BW NW2004s up and running. We are on Patch 7 on the back-end and patch 2 on the front-end. We can develop almost all objects on the back-end (with dumps here and there) but we can not execute any queries (both content and custom queries) the error message we get is "error occurred in the communication with the BW server, could not determine a value for variable 0DAT from the authorizations". This is in the sandbox so we all have "SAP ALL" authorization.
Has anybody come across this issue? What could be the cause/solution?
Thanks,
Paul.

Hi,
Do you have 0DAT variable installed from a business content?
If not, install it.
Best regards,
Eugene

RH_RELATION_MAINTAIN Authorization

Similar Messages

Maybe you are looking for