Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Similar Messages

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Blue screen fatal error messages - laptop always crashes and now won't even let me restore

My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.

Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went tblack screen with error messages. Rebooted 5x, won't go paspinwheel

I had to reboot my iMac, it froze... When I went to reboot it started up as usual... Made power sound, showed apple logo (white screen)... And pin wheel started after 3 to 4 mins., went to black screen with error messages. Rebooted 5x, shot off power source, disconnected external devices... Now won't go past pinwheel... Since it does not go to black screen, I cannot convey error messages... Please advise what I could try... Thank you... I have an iMac 2009... Upgrade operating system to new system this spring... Don.

It is guitardad's again... I read past topics on this issue... As I am not overly computer savvy, I want to be careful that I don't mess things up further... Of course the extended warranty is done... There is talk about booting from the system disc... I'm not sure if this is the first thing to do or not... Can the support community, advise me on what logical steps I should take ( in order) or direct me to a website and/ or you tube video that walks one safely through the processes... Once again thank you for reading and offering your advice... I am on fixed $$$ so I'm trying to avoid calling apple, unless I have no options and/or the suggestions do not resolve the issues... Tx again Don.

I keep getting blue screen and error message to remove this file from system. spooldr.sys

HP Officejet 4500 Wireless All-in-One Printer - G510n    w/operating system     Windows XP Professional
I installed the printer in February and the disk did not finalize the setup process. I went online and
down loaded the drivers and software that was offered from the HP website.
The printer works, but as the months have gone along, I keep getting updates for the printer and
the system needs to reboot and it does automatically.
Now I am getting a blue screen with a critical dump error message. HP error reporting keeps sending
the same message back to restore to earlier date before the updates. That worked for awhile. Now
HP Error system says that malware has corrupted and needs to remove system file     spooldr.sys
Is this in your driver software. Spooldr is the system that caches pages of data for printing in chronological
order....
Can I uninstall my software and drivers and change to the plain & simple, print and scan to prevent the
spool driver from loading to my system?

Thank you for your input. But, It is amazing that you can tell me that I was infected with rootkit.
Without information as to how to fix, your information is after the fact and useless.
I used the Safety Scanner provided to me by HP.  A full scan didn't detect any Malware in any files on my system. But the last screen dump provided the information that   spooldr.sys was corrupted and needed
to be removed.
Coming into HP Form, I did read on the HP website that my system Windows XP Professional was not listed
and noted that the software may have not been just what I needed. This was the reason for the question
about uninstalling and reinstalling less of the program. I really don't need my printer to print backward and
that is all I see that it is doing that other printers don't.
Besides, Kudos goes to the person from HP who sent the email, suggesting I used the HP Update software and drives recommended for my computer system. Computer, printer is working, back to normal and hasn't taken a dump since, I uploaded software and drives for Windows XP Professional.

My C5280 All in one printer flashes a blue screen with error B0248122.

It flashes a blue screen with a different B 8 digit number each time. All the buttons on the front flash yellow. I have to unplug it to turn it off. Occasionally it will say to turn it off and turn it back on, but it rarely solves the problem. This used to be an infrequent problem, only appering occasionally, now it is all the time and am not able to use my printer at all.
Any ideas?

Hello,
This error typically is caused by some issue with the ink delivery system.
Recommend to follow some steps mentioned in this link:
http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00489814&lc=en&cc=us&dlc=en&product=4083871#N51
Hope this helps.
I work for HP.

Machine Check blue screen (with error codes)

I thought I had this fixed, but apparently I was wrong. Every now and then, for what seems to be no apparent reason, I get this blue screen error:
Quote
CRITICAL STOP: MACHINE CHECK EXCEPTION
A problem has been detected and windows has been shut down to prevent damage to your computer.
If this is the first time you have seen this stop error screen, restart your computer. If this screens appears again follow these steps:
Check to make sure any new hardware and software is properly installed. If this is a new installation, ask your hardware or software manufactorer for any windows updates you may need.
If problems continue, disable or remove any newly installed hardware or software. Disbable BIOS memory options such as caching or shadowing.
TECH INFO: ***STOP: 0x0000009c (0x00000004, 0x80545ff0, 0xb2000000, 0x00070f0f)
I had similar problems before, but the blue screen is new after replacing my video card. (Before the new video card, the computer was freezing up with a black screen. I'm assuming the blue screen is a step in the right direction?) Original thread is here.
Right now, this is my current system:
Motherboard: K8T Neo-FIS2R [Bios version 2.0 (I think; its the most current version as of 2-15-05)]
CPU: Athlon 3000+
PSU: Antec Truepower 550 (+5V=40A; -5V=0.5A; +12V=30A; -12V=1.0A; +3.3V=32A; +5V SB=2A)
RAM: 1 1GB DDR400 (cas 3.0)
HD: Seagate ST320082 200GB SATA Drive (VIA driver)
DVD: LiteOn DVD Rom
Floppy Drive
Running Windows SP2, all current updates installed
NVidia 6800GT video card (Asus; using TechConnect driver)
Soundblaster Audigy 2
DLink Wireless Network Adapter (DWL-G520)
I have tried replacing the RAM, HD, video card, and Power supply with similar results.
The error message clearly states that I should try disabling memory options such as BIOS memory options such as caching or shadowing, but I don't know what affect this would have if I did this. Any opinions on this and other suggestions would be greatly appreciated.
Thanks...
- doubleozero
- EDIT -
One more note: Nothing is overclocked in PC. All temperatures seem normal. CPU does not go over 38C.

I ran memtest for about 5 hours with no errors. I'll give it a go for a while w/o the sound card for a week or two.
I wish this thing wasn't so hard to troubleshoot. For example, it was happening about 2 times a day before I tried new ram. After going with the new stick of ram, it was fine for about 10 days, so I thought it was solved. Then last night, I got two of these again.

Blue Screen + Spotlight error message... I can't reboot!

Hi All,
Upon startup, iMac with 2+GB RAM running OS X 10.5.6 does the following:
1. Normal startup chime
2. Blue screen appears
3. Spotlight error message "Spotlight quit unexpectedly"
I can't reboot, or boot in Safe Mode or launch Disk Utility from DVD and obviously I can't reinstall Leopard
I'm really frustrated
Message was edited by: Pacopeluca

Pacopeluca wrote:
I can't do any of that
If you're really holding down those keys immediately after pressing the power button, yet they don't behave as expected, you may have some sort of hardware problem.
Do you have access to another keyboard that you could try?
How is that keyboard connected to your iMac? Your iMac probably has three USB ports. I'd try the keyboard in each of them in turn.

Touchsmart PC 300-1120 Blue screen and error messages

My computer turns on and I can access the internet however it will all of sudden kick me off the internet and a blue screen appears that says: Kernel_data-Inpage-Error and then advises me to remove any new hardware or software. When I hit enter it goes to a black screen and another message comes up that says Reboot and Select proper boot device but when you hit enter it just repeats and you cannot get out. Won't even allow me to ctrl-alt-delete to shut down. Only thing I can do is pull the plug.
Anybody know what sort of error these could be and what can be wrong? The only new software is Adobe Reader update and looks like Microsoft updates recently.

Hello Sydberry,
Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the HP Forums I would like to direct your attention to the HP Forums Guide First Time Here? Learn How to Post and More. I have read your post on how your computer enters into a blue screen event, and I would be happy to assist you! To begin, I will need to ask you a few questions:
What is the Product and Model Number of your desktop computer?
What version of Windows do you have installed on your computer?
Has your computer completed all of its important Windows Updates?
Have you updated your HP drivers using the HP Support Assistant?
Is this an on-going, or recent issue?
Is your anti-virus software up to date?
Is the BIOS on your computer up to date?
In the meantime, I recommend following this document on BSOD Kernel Data Inpage Error. This should help identify the root of the blue screen event in relation to kernel error.
Please re-post with the results of your troubleshooting, as well as the requested information above. I look forward to your reply!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping!

Satellite A500 - Blue screen - critical errors - reboots!

This laptop is driving me mad, why did I ever get rid of my other notebook??
This machine caught my eye, it looks fab, but performance wise it is extremely poor - blue screens and reboots all the time, with critical errors - I've had enough!! Only bought it on 7th Jan this year, and it has done this ever since new, it has to go back!
And by looking at the posts on this forum the problem appears prevalent, and none of the experts seem to have an answer?? Should I reallybe having to upgrade the Bios and drivers and searching for solutions to try and resolve the many issues with this machine???
I'm gonna get a refund and buy something reliable, sorry Toshiba but I can't endorse this machine, it has caused me nothing but grief!
Very upset, especially as this was a gift 8-(

*This is what happened 5 mins ago, switched machine on checked emails was saving a picture of my new grandson from one of the emails, blue screenedbelow*
Problem signature:
Problem Event Name: BlueScreen
OS Version: 6.1.7600.2.0.0.768.3
Locale ID: 2057
Additional information about the problem:
BCCode: 50
BCP1: FFFFF88007F8B848
BCP2: 0000000000000001
BCP3: FFFFF88008D4E624
BCP4: 0000000000000000
OS Version: 6_1_7600
Service Pack: 0_0
Product: 768_1
Device driver software was not successfully installed
Base System device XDevice unplugged
Base System device XDevice unplugged
Base System device XDevice unplugged
*Message in toshiba forum that there is a problem with Nvidia graphics - which I have up dated before, but as I keep being restored to earlier versions, the updates are all over the place, I update, machine blue screens updates gone? Update again......and so it goes on....*
*Windows automatic updates is switched on, but everytime Windows does an update this machine crashes and has to install to an earlier time so Im back to square one.........*
*It would be comical if this was a cheap machine!*

X1 Carbon Touch: Blue screen or error messages after wake up from sleep/hibernate mode

Sleep function is not consistent... While it works most of the time; yet the other times are frustrating when the result is reboot, reboot with blue screen or hang!
Rgds,
ME

Hey @mambu ,
Welcome to the HP Forums!
I understand you're having issues with screen brightness and blank screens since updating your dv6 notebook to Windows 8.1.
Looking at the available drivers for your notebook you will find there are no drivers for Windows 8 or Windows 8.1 for this notebook. This will drastically affect how the graphics card (GPU) functions in this Windows environment.
Your notebook has a feature called switchable graphics. In order for switchable graphics to function properly you must use drivers provided by HP directly for the graphics cards to work properly. Since HP didn't release drivers for Windows 8 or 8.1 for the GPU setup on your notebook the brightness functions may not work and you may notice issues with the display. It would make sense that this issue is present after sleep or hibernation because the drivers need to be initialized and are encountering errors because they are not the correct drivers, or are generic Microsoft drivers and cannot communicate properly..
The only professional suggestion I can make is that you reinstall an operating system that your notebook hardware has available drivers for. Windows 7. Sorry for the bad news.
Thanks!
Please click the "Kudos, Thumbs Up" at the bottom of this post if you want to say "Thanks" for helping!
Please click "Accept as Solution" if you feel my post solved your issue, it will help others find the solution.
The Great Deku Tree
I work on behalf of HP.

HP OJ 8500A Blue Screen with error c0260000 (Solution)

The root cause of this error occurs only when a Linksys router sends “0” value parameters to the HP Officejet Pro 8500A e-All-in-One series for IPv6 renewal.
Use the following steps to disable IPv6.
1. Go to the Embedded Web Server EWS, click the Network tab, and then click Network Protocols .
2. Change the setting to Enable IPv4 Only .
3. Click Apply , and then click OK to save the setting.
4. Send a print job and make sure the printer prints successfully
If any error appears, click OK or refresh the EWS page.
1. Click OK , or refresh the web browser manually to remove the error message.
2. Go to the EWS, click the Network tab, and then click Network Protocols .
3. Change the setting to Enable IPv4 Only .
4. Click Apply , and then click OK to save the setting.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"
This question was solved.
View Solution.

Fadigem wrote:
Hello Praveen,
I have actually disabled the IPv6, and the printer worked fine for 5 days but then the same problem occurred!!
I went to Control Panel / Network & Internet, to check if IPv6 was enabled automatically, but I found it to be still disabled and my printer is doing this crazy blinking again.
Please advise back. I'm really tired of switching it on and of again, and having to apologize to my clients all the time for not receiving their faxes!!
Thanks
Hi,
Is the printer connected in wireless??? Connect the printer using ethernet cable and this issue should not comeup again. Also check if the router has latest firmware installed. If all fail, contact HP Tech support.
Say "Thanks" by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as "Accepted Solution"

Satellite A350 - Blue screen with error message

Similar Messages

Maybe you are looking for