Smart Collection "Capture Date is in the last n hours" not working?

In Smart Collection, the rule "Capture Date is in the last n hours" doesn't work for me. It seems to behave similarly to "Capture Date is today".  (See the screenshot below).  Has anyone else noticed this, or can you replicate this?  If so, I'll file a bug report.

Key into the address bar ''about:crashes'' you should get a list of Crash IDs paste a couple of those into your next Message. Also ensure any security related software is fully updated that often causes problems when upgrades to Firefox are released.
Standard reply:
We're sorry to hear that your Firefox seems to be crashing. Please perform the following steps to give us a crash report ID that helps us find out more about the cause of the crash.
#Enter about:crashes in the Firefox location bar (that's where you enter your website names) and press Enter. You should now see a list of submitted crash reports.
#Copy the most recent 5 report IDs that you see in the crash report window and paste them into your forum response.
Thanks in advance for your help!
More information and further troubleshooting steps can be found in the [[Firefox crashes]] article.

Similar Messages

  • Firefox ESR 10.0.12 disables flash plugin - updates to the last version do not work?

    Suddenly - without any actions by me - FF ESR 10.0.12 refuses to accept Adobe Flash? (System Win 7 64 Ultimate)
    It started with a very annoying bar, which cost me 2 hours to deactivate, which told me to update an very old and unused Adobe Reader plugin. Then it insisted, that the Foxit PDF reader plugin was not up to date. Since I do not use it, I deactivated it too. Since I seldom use Flash, I just found out today, that youtube does not work anymore - FF insists, that my flash plugin is too old and it deactivated it.
    This has cost me hours up to now and it is _exactly_ the reason why I use the ESR channel.
    What I did:
    Deinstalled Adobe Flash completely (using Windows). Used the normal Firefox update, which it recommends (your flash player was deactivated, please install...). No success, it simply goes into a loop, always telling me my flash player is too old.
    I also installed it directly from Adobe (the Firefox version!!), in all cases it reports version 11.5.502.104. The last version from Adobe - but it seems to be too old???
    I am spitting angry now - this kind of trouble is the reason I only use ESR versions from Mozilla. I do not want your chaos troupe to play around with _my_ installation. But obviously you found ways to do so.
    If this is not solved (and no, I will _not_ reinstall Firefox, I will _not_ delete my profile) in a few days, Firefox is dead for me. I am already looking to Chrome and Opera. Many friends have these browsers - I am a bit conservative, and I want my browser stable and the look an feel should be stable also. I do _not_ want a new version every two weeks, which every time costs my effort and time to configure it how I want it.
    The question here is: How did you manage to disable the last version of Flash, and why? Why must I now register here and invest valuable time to get my browser to work again?? If I had done something, installed or removed something, ok. But I did not. (And yes, up to now I did update Flash and other plugins, when I was prompted to do so)
    Clearly _your_ management does _not_ work: If I use the solutions which FF itself recommends, it sends me in an endless loop: Install newest Flash, sorry, Flash is outdated, install newest Flash...
    Is this the 'new security'? Bah. If you did this for the 'normal user' (which you obviously do not respect anymore), you failed. And you failed completely for me: If software insists to do things 'automatically', it should at least do them reliably, _or_ it should ask. But working in the background, changing important things, reporting nothing, and then failing is exactly the reason why I disable all 'automatic' activities and want to be _asked_ before some idiotic piece of c.... deconfigures itself - and stops working...
    Hints to the Troubleshooting Info below:
    At this time Flash player is installed, shows in the systems software list as 'Adobe Flash Player 11 Plugin', Version 11.5.502.146. The rest are my normal plugins. Serveral changes to about:config were done by me in an effort to make FF usable again, without nagging 'info' bars...

    Additional information - according to the wiki you pointed me to, it was correct to uninstall flash using Windows control panel. I am very sure that I already had the latest version installed from the beginning, because Flash player pointed me to an update on Windows start (as usual) several days ago.
    The error clearly lies with FF, since despite an up to date Flash player it decided it wants it new - something to do with the blacklist? How can it tell, that its outdated, if it does not find it and not show it in the list of plugins?
    There is something fishy here...

  • Smart collection has "source color profile" as filter option, does not work on camera profiles

    In Lightroom 5 i tried to use the "source color profile" filter option in smart collection, however it only seems to work on rgb files (jpg, tiff) that have a profile embedded. It does not work on values like "Adobe Standard" which is a "source" profile of a RAW file, or any of the camera profiles i can choose fo given Raw file. What am i doing wrong?
    The Help does not give any clue on this, nor does the coverage by any of the Lightroom guru's like Juleanne Kost.

    In my opinion the filter is acting correctly.
    The Adobe Standard profile is not a profile defined in the source file, it is a profile assigned to the file in the raw converter and used with raw files that do not have a source color profile, already, so to me the filter is acting correctly because “source” means where the profile comes from, rather than what profile a master photo has had assigned to it. 
    The source-color-profile option is useful to determine the size of the color gamut in a file’s color numbers which indicates its suitability for various purposes:  An sRGB file can be safely uploaded to the web, an AdobeRGB file is going to look right on a wide-gamut monitor and printablebut shouldn’t be uploaded to the web, while a ProPhotoRGB file has a large color space and can be safely edited in a way that adjusts the colors significantly, especially if it is 16-bit, without color-banding or posterization, but a ProPhotoRGB file will probably not look good if directly uploaded to the web or sent to a print-shop that doesn’t do their own color profile conversions.
    I would agree that being able to filter raw files based on the assigned color profile would also be useful, but this is a different thing, to me at least, than filtering by the source-color-profile.

  • I think the last update did not work, and now I cannot open jpeg attachments with windows picture and fax viewer, it is not listed in the tools/options drop dow

    I don't believe the last Thunderbird update worked, there was a very fast error message. But since then I cannot open jpeg attachments in Windows Picture and Fax Viewer. If I go to Tools, then options, the jpeg line is grayed out, and the drop down menu does not show Windows Picture and Fax Viewer. The windows picture and fax viewer still works on my computer, but not for opening attachments.

    I did as you said - deleted the entry for jpeg, but when I tried to open one there is not an option for Picture and Fax Viewer in the drop down, and it can't be found by browsing. It's just not there anywhere even though I can see pics in it except in email attachments.

  • In the last 36 hours my photos have jumbled within various albums. Random photos have attached at the end of an unrelated album, old photos have appeared again on Recently Added, some photos are missing but still on "collections". No date order

    Within the last 36 hours my photo albums have turned into a real jumbled mess. Random photos have appeared at the bottom of my Recently Added album. In most cases it's a copy of a photo that was taken months or years ago so now it appears twice.. 200 random photos have appeared in an unrelated album.  Some photos are missing completely. The date order is correct in some places and then it goes back and forth over the months and years. The "collections" appears to be okay.  This morning when I went into the photo app About 50 photos that were permanently deleted 3 months ago reappeared on the Recently Added Album which  I deleted again.  if  I delete these irreplaceable photos from the unwanted album it will delete the photo completely. Help please - this is so annoying and frustrating. I hate to think when I turn the iPad on tmoor row what else will have changed .

    Quick Update:
    I usually have my Mac laptop up with Messages running on it.  As you know, it will receive the same messages you send/receive on your iPhone.  I thought all my old photos would be there too, but they have all disappeared as well except for the last few.
    Messages is supposed to archive all old photos to  a directory called ~/Library/Messages/Attachments.  On my mac, this was a 0 byte file that was created back in Jan 2014.  As a result, none of the old photos got saved on my Messages app either.  I looked at a Time Machine Backup and it has been the case since September (no earlier backups available).  So, it's unclear how long this issue has been going on for my Messages app and how related it is to my iPhone problem.
    In any case, if any of you use Messages, you may be able to recover your photos in that directory provided it didn't get trashed like mine did.  I moved the file and created a new Attachments directory.  Upon relaunch, Messages started properly storing new photos in there again.
    Either there was a really terrible bug in the Apple software or something malicious has happened.
    P.S.  I'm running OS 10.9.5 Mavericks.   There is a thread of people with this problem on Yosemite here:
    No pictures are shown in Message om Mac
    This seems like a pretty seriously terrible bug.  I will be talking again to AppleCare on Wednesday and I hope they can escalate this.

  • User Defined Field that gives the date output of the last price update.

    We would like to create a User Defined Field (UDF) with a Formatted Search (FMS) on the Item Master form that gives the date output of the last price update specifically the wholesale price.
    Last Price Update
    Pricelist 2 = Wholesale
    Is this feasible?
    If it is feasible what is the recommended approach?
    Current working UDF on Item Master.
    /* Date output is based on all the latest updates on the Item Master.*/
    select max(updatedate)
    from aitm
    where itemcode = $[oitm.itemcode]
    Resources that were helpful.
    1.(Note:1165947 - Tracking Item Price Changes.)
    2. Case 4-I6: Query on price updates. Mastering SQL Queries for SAP Business One By: Gordon Du

    Thank you Gordon,
    We are looking for the date output of the 'Last Price Update' based on 'Pricelist 2 = Wholesale' which is the challenge.
    These 2 are the parameters for the date output, I should have mentioned that in my original message.
    Last Price Update
    Pricelist 2 = Wholesale
    Per reading a bunch of other similar Forum Questions it looked like it is might not be possible to do. With there being no date on the AIT1 table and AITM.Updatedate is based on any and all updates not just last 'Last Price Update' and not sure how to use the loginstanc.
    Thanks,
    Vern

  • How to get the last(latest or previous) working day

    hi,
    using sysdate we may be getting today's date and sysdate-1 will be fetching the yesterday's date. but if sysdate-1 turns to be sunday or a holiday then we need to get the previous date to that holiday date .THe list of holidays are in lt_list_holidays. The Holiday date shall be the holiday_date column. I need a query which displays the last (latest or previous) working day ..
    Please advice
    Edited by: vine on Jul 20, 2010 5:30 AM
    Edited by: vine on Jul 20, 2010 5:51 AM

    Hi,
    vine wrote:
    hi ,
    THe queery seems to be fine but in the middle if we have any holidays and the holidays are in lt_list_holidays table . the name of the holiday date is holiday_date in lt_list_holiday.Is the name of the holiday important? I'll assume not. I'll also assume you have a column d (a DATE) that is the date of the holiday.
    >
    Please adviceThat's quite a different problem from what you first posted.
    Instead of posting a question x, waiting for someone to answer it, and then saying that the problem is really y, don't you think it would be better to post question y in the first place?
    You can do something like this:
    WITH     prev_days     AS
         SELECT     TRUNC (SYSDATE) - LEVEL     AS a_date
         FROM     dual
         CONNECT BY     LEVEL <= 4     -- worst case (see below)
    SELECT     MAX (a_date)     AS previous_work_day
    FROM     prev_days
    WHERE     TO_CHAR (a_date, 'Dy', 'NLS_DATE_LANGUAGE=''ENGLISH''')
                   NOT IN ('Sat', 'Sun')
    AND     NOT EXISTS ( SELECT  1
                   FROM    lt_list_holiday
                   WHERE   d     = prev-days.a_date
    ;Where I work, holidays are never consecutive, in fact, they are always at least 7 days apart, so I can be sure that a period of 4 consectuive days will always contain at least one work day. (There may be two weekend days plus one holiday; that's the worst case.) If you can have two or more holidays in a row, or holidays spaced 3 days apart (so that one might fall on a Friday, and the other on Monday), then increase the "magic number" 4 in
         CONNECT BY     LEVEL <= 4     -- worst caseto something appropriate. If you put it too high (say 10), no serious harm is done.

  • I am having problems backing up icloud. the message says, "the last backup could not be completed."  Has anyone had this problem?

    I just purchased more icloud space and I ham having problems backing up icloud on my iphone 5.  The message says,"the last backup could not be completed."  Anyone know why this is happening.

    This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail.  To troubleshoot these, try deleting your last iCloud backup (if you have one) by going to Settings>iCloud>Storage>Manage Storage, tap your device under Backups, then tap Delete Backup and choose Turn Off & Delete at the prompt.  Then go to Settings>iCloud>Backup and turn iCloud Backup back on and try backing up again.
    If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail.  To locate which one, go to Settings>iCloud>Storage>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • TS4036 on iCloud I get The last backup could not be completed?  I have 4gb of space

    Hi trying to back up my stuff on icloud.  I can do it on the computer but it will not let me on my iphone.
    i have 4GB space, so thats not the problem.
    it says - The last backup could not be completed.
    any ideas?
    thanks

    This may be caused by a corrupt existing backup that needs to be deleted, or by data on your device that is causing the backup to fail.  To troubleshoot these, try deleting your last iCloud backup (if you have one) by turning off iCloud Backup in Settings>iCloud>Storage & Backup, then tap Manage Storage, swipe across your backup and tap Delete, then go back and turn iCloud Backup back on and try backing up again.
    If it still won't back up, you may have an app or something in your camera roll that is causing the backup to fail.  To locate which one, go to Settings>iCloud>Storage & Backup>Manage Storage, tap the name of your device under Backups, under Backup Options tap Show All Apps, then turn them all to Off (including camera roll) and try backing up again.  If the backup is successful, then the camera roll and/or one of your apps is causing the backup to fail and you'll have to located by process of elimination. Turn the camera roll On and try backing up again.  If it succeeds, turn some of your apps to On and try backing up again.  If it succeeds again, turn some more apps to On then try again; repeat this process until it fails.  Eventually you'll be able to locate the problem app and exclude it from your backup.

  • I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet.  There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer

    I'm trying to make a time sheet and include a grid, but I'm having a hard time figuring out how to print a full grid on my spreadsheet.  There are options for shaded grids but I want a defined grid, and I have spent the last 2 hours looking for the answer.  Any ideas?

    Hi Cynthia,
    Are you planning to have this table do any of the calculation, or is is to be used as the electronic equivalent of a sheet of paper with a grid printed on it—a place to record the data.
    For your seven column table:
    Are you using one or more rows at the top of the table to label the data below? If so, you might want this row (or these rows) to be set as Header Rows.
    Are you using the leftmost column to label the rows? If so, you may want this column to be a Header column.
    The default table supplied on the "Blank" templates contains one header row and one header column. If you need more (or fewer) Header rows or columns, select the table, then go Table (menu) > Header Rows > (choose the number you need). Repeat to set the number of Header Columns.
    To make a seven column table from the table supplied by default, click on any cell in column H (The eighth column), and drag right to add more cells to the selection, until you get to the last column of the table. With these cells selected, Go Table > Delete Columns.
    To make the remaining seven columns fit across a single page:
    Go View > Show Print View to show the table as it would appear when printed to paper.
    Select the table by clicking its icon in the Sheets List to the left (easy method), OR by carefully clicking on the outside boundary of the table itself (fiddley method).
    With the table selected, you will see square white handles at each corner and at the middle of each side (including the top and bottom).
    With the mouse, grab the handle in the middle of the right side of the table and drag right (or left) until the table just fits onto the width of the defined page.
    With the table still selected, set the thickness and colour of the cell boundaries using the Gaphics Inspector (as described by Jerry), or using the Stroke, Thickness and Color Well controls in the Format bar above the working portion of the Window.
    Regards,
    Barry

  • My computer keeps restarting itself for the last two hours and i don't know what to do. Please help me

    I need help, my MacBook Pro keeps restarting itself for the last two hours saying there's a problem. I can't get past the grey screen without it restarting and i don't know what to do...please help me

    Reinstall Lion, Mountain Lion, or Mavericks
         Boot to the Recovery HD: Restart the computer and after the chime press and hold down the
         COMMAND and R keys until the Utilities menu screen appears. Alternatively, restart the computer and
         after the chime press and hold down the OPTION key until the boot manager screen appears.
         Select the Recovery HD and click on the downward pointing arrow button.
         Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the Utilities menu.
         Repair the Hard Drive and Permissions as follows.
    After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list.  In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
         Reinstall Lion/Mountain Lion, Mavericks: Select ReinstallLion/Mountain Lion, Mavericks from
         the Utilities menu, and click on the Continue button.
         Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is
                    three times faster than wireless.

  • Help with pulling records for the last 24 hours

    Post Author: kbrinton
    CA Forum: Formula
    Hi,
    I don't know what is wrong with me but I can not figure out how to get Crystal to pull records for the last 24 hours.  I have a date field I can key off of but I can not figure out the formula or correct syntax to put in the Selection formula.  Any help would be great!!  Thanks

    Post Author: SKodidine
    CA Forum: Formula
    No need to create any formula.  In your record selection criteria type:
    {table.date} in dateadd("h",-24,currentdatetime) to currentdatetime
    If you just want the prior 24hrs and do not care about the time then replace 'currentdatetime' with 'currentdate'.
    (currentdatetime - 24) will give you 24 days before and not 24 hours.

  • How to find files added in the last 8 hours that caused disk full

    I used a program called Eagle Filer to archive about 20 Gigs of email from Entourage to a library on an external drive. Oddly, this process made my main (startup) disk full, which had about 16 Gigs available. Clearly this thing wrote a lot of data to my startup disk as well, but I can't seem to find it. It happened in the last 8 hours. What's the best way to figure out where these data are? Because they're individual emails, each file may not be enormous, although I'm guessing the parent folder must be. Simply doing a Spotlight for "files created in the last day" isn't revealing it. Maybe they're hidden somehow? How do I find it where all this junk landed?
    thanks,
    Mike

    To find files in your home directory:
    find ~ -newerBt '8 hours ago'
    To find files on your drive that you have permission:
    find / -newerBt '8 hours ago' 2>/dev/null
    To find all files
    sudo find / -newerBt '8 hours ago'
    To see the file size, add "-ls"

  • TS3992 Trying to commence first ever Storage & Backup but it fail and messages "The last backup could not be completed." "Last Backup-Never". Any clues?

    Trying to commence first ever Storage &amp; Backup but it fails and massages "the Last backup could not be completed" "Last Backup - Never".

    Welcome to the Apple Community.
    You might try a forced shutdown to begin with, hold down the top and home buttons together until the device shuts down, then restart it.
    If your back up continually fails, you might try turning off back up on your mobile device (settings > iCloud > storage & backup) and then deleting the backup file from iCloud by swiping the backup file on the mobile device (settings > iCloud > storage & backup > manage…) and then turning back up on again.
    If this doesn't help, try turning off some items for back up in a pattern to try to establish if your problem is being caused by specific data on your device.
    Being able to back up to the cloud can be very useful, especially if you don't have access to a computer or have infrequent access to one, however unless you specifically need to use iCloud for back up, you will find backing up to iTunes significantly more convenient and possibly more reliable.
    More about iCloud v iTunes Back Up

  • Update statement is taking for ever, has been running for the last 6 hours.

    UPDATE PRODUCT_INTERIM A
    SET PRODUCT_ID =
    SELECT MAX(PRODUCT_ID)
    FROM PRODUCT B
    WHERE B.CHAIN_ID = A.chain_ID
    AND B.x_id = A.x_id
    WHERE EXISTS
    SELECT '1'
    FROM RET_PRODUCT B
    WHERE B.CHAIN_ID = A.chain_id
    AND B.x_id = A.x_id
    Oracle Experts, The above query is taking for ever and ever. We do have 11 million records in product_interim table, for those 11 Million records, this query has been running for the last 6+ hours...in OEM, it still says, 89% percent completed and 2 hours waiting time.. it always shows 2 hours waiting time...
    Can you guys give some ideas to get this run fast....Your time and help would be greatly appreciated...

    >
    Oracle Experts, The above query is taking for ever and ever. We do have 11 million records in product_interim table, for those 11 Million records, this query has been running for the last 6+ hours...in OEM, it still says, 89% percent completed and 2 hours waiting time.. it always shows 2 hours waiting time...
    Can you guys give some ideas to get this run fast....Your time and help would be greatly appreciated...
    >
    Don't do anything yet!
    Let it keep running until you know that you REALLY want to stop it. If you think the UPDATE is slow the ROLLBACK if you kill it may take much longer.
    Now - how do you plan to get it to 'run fast' when it is already running? If you do a ROLLBACK the time it takes to apply the UNDO could take even longer than the time it has taken to get this far with the update. And if you interrupt the ROLLBACK you will have to do a recovery from backup. Don't go there.
    Read the FAQ at the top of the thread list for how to post a tuning request and the info you need to provide. Some of that info is:
    1. Ask for help BEFORE you start running the query. Once you start you should usually just let it finish.
    2. Always provide your 4 digit Oracle version
    3. Provide table and index DDL
    4. Provide row counts for the table and for the query predicates
    5. Provide info about the exact command you used to collect stats and say if the stats are current

Maybe you are looking for