[SOLVED] Wireless connection problem!
I cant connect wireless. It waits at stage 4. see the log. Help pls!
lspci output:
02:00.0 Ethernet controller: Marvell Technology Group Ltd. 88E8055 PCI-E Gigabit Ethernet Controller (rev 14)
05:00.0 Network controller: Intel Corporation WiFi Link 5100
log:
Aug 3 19:18:31 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: disconnected -> inactive
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) starting connection 'Auto notwirelessap'
Aug 3 19:19:00 localhost NetworkManager[826]: <info> (wlan0): device state change: disconnected -> prepare (reason 'none') [30 40 0]
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Aug 3 19:19:00 localhost NetworkManager[826]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0/wireless): access point 'Auto notwirelessap' has security, but secrets are required.
Aug 3 19:19:00 localhost NetworkManager[826]: <info> (wlan0): device state change: config -> need-auth (reason 'none') [50 60 0]
Aug 3 19:19:00 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Aug 3 19:19:11 localhost NetworkManager[826]: get_secret_flags: assertion `is_secret_prop (setting, secret_name, error)' failed
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) scheduled...
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) started...
Aug 3 19:19:11 localhost NetworkManager[826]: <info> (wlan0): device state change: need-auth -> prepare (reason 'none') [60 40 0]
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) scheduled...
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 1 of 5 (Device Prepare) complete.
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) starting...
Aug 3 19:19:11 localhost NetworkManager[826]: <info> (wlan0): device state change: prepare -> config (reason 'none') [40 50 0]
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0/wireless): connection 'Auto notwirelessap' has security, and secrets exist. No new secrets needed.
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: added 'ssid' value 'notwirelessap'
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: added 'scan_ssid' value '1'
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: added 'key_mgmt' value 'WPA-PSK'
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: added 'auth_alg' value 'OPEN'
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: added 'psk' value '<omitted>'
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 2 of 5 (Device Configure) complete.
Aug 3 19:19:11 localhost NetworkManager[826]: <info> Config: set interface ap_scan to 1
Aug 3 19:19:11 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: inactive -> scanning
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: scanning -> authenticating
Aug 3 19:19:14 localhost kernel: [ 201.475012] wlan0: authenticate with 00:14:78:ec:29:bb (try 1)
Aug 3 19:19:14 localhost kernel: [ 201.476781] wlan0: authenticated
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: authenticating -> associating
Aug 3 19:19:14 localhost kernel: [ 201.481976] wlan0: associate with 00:14:78:ec:29:bb (try 1)
Aug 3 19:19:14 localhost kernel: [ 201.484507] wlan0: RX ReassocResp from 00:14:78:ec:29:bb (capab=0x431 status=0 aid=2)
Aug 3 19:19:14 localhost kernel: [ 201.484510] wlan0: associated
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: associating -> associated
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: associated -> 4-way handshake
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): supplicant interface state: 4-way handshake -> completed
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0/wireless) Stage 2 of 5 (Device Configure) successful. Connected to wireless network 'notwirelessap'.
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) scheduled.
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) started...
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): device state change: config -> ip-config (reason 'none') [50 70 0]
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0) Beginning DHCPv4 transaction (timeout in 45 seconds)
Aug 3 19:19:14 localhost NetworkManager[826]: <info> dhcpcd started with pid 1795
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0) Beginning IP6 addrconf.
Aug 3 19:19:14 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) complete.
Aug 3 19:19:14 localhost dhcpcd[1795]: version 5.2.12 starting
Aug 3 19:19:14 localhost NetworkManager[826]: <info> (wlan0): DHCPv4 state changed nbi -> preinit
Aug 3 19:19:14 localhost dhcpcd[1795]: wlan0: rebinding lease of 10.120.103.17
Aug 3 19:19:14 localhost dhcpcd[1795]: wlan0: acknowledged 10.120.103.17 from 10.120.100.254
Aug 3 19:19:14 localhost dhcpcd[1795]: wlan0: checking for 10.120.103.17
Aug 3 19:19:17 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 3 of 5 (IP Configure Start) starting DHCPv6 as requested by IPv6 router...
Aug 3 19:19:17 localhost NetworkManager[826]: <info> Activation (wlan0) Beginning DHCPv6 transaction (timeout in 45 seconds)
Aug 3 19:19:17 localhost NetworkManager[826]: <warn> the dhcpcd backend does not support IPv6.
Aug 3 19:19:20 localhost dhcpcd[1795]: wlan0: leased 10.120.103.17 for 86400 seconds
Aug 3 19:19:20 localhost NetworkManager[826]: <info> (wlan0): DHCPv4 state changed preinit -> bound
Aug 3 19:19:20 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) scheduled...
Aug 3 19:19:20 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) started...
Aug 3 19:19:20 localhost NetworkManager[826]: <info> address 10.120.103.17
Aug 3 19:19:20 localhost NetworkManager[826]: <info> prefix 21 (255.255.248.0)
Aug 3 19:19:20 localhost NetworkManager[826]: <info> gateway 10.120.100.254
Aug 3 19:19:20 localhost NetworkManager[826]: <info> nameserver '193.140.216.203'
Aug 3 19:19:20 localhost NetworkManager[826]: <info> nameserver '193.140.216.8'
Aug 3 19:19:20 localhost NetworkManager[826]: <info> domain name 'hacettepe.edu.tr'
Aug 3 19:19:20 localhost NetworkManager[826]: <info> Activation (wlan0) Stage 4 of 5 (IP4 Configure Get) complete.
Last edited by alperenel (2011-08-08 01:35:47)
dobedo wrote:https://bbs.archlinux.org/viewtopic.php?id=120032
thanks that solved my problem.
Similar Messages
-
[SOLVED] Wireless Connection Problems - Broadcom Corporation BCM4318
Attempting to troubleshoot wifi connectivity issues on a fresh install on an old dell Inspiron 2200. This laptop uses the Broadcom b43 driver:
http://wireless.kernel.org/en/users/Drivers/b43
I read that page top to bottom, installed b43-fwcutter firmware extraction tool, installed the b43 driver. lsmod confirms b43 is installed. lspci shows the drivers are installed, but I can't get the interface to show with ip link or ip addr.
lspci -vnn | grep 14e4:
02:03.0 Network controller [0280]: Broadcom Corporation BCM4318 [AirForce One 54g] 802.11g Wireless LAN Controller [14e4:4318] (rev 02)
I'm confused by dmesg below because it first tells me that "b43-phy0: Broadcom 4318 WLAN found" then a few lines down says driver not found.
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 3.12.6-1-ARCH (tobias@testing-i686) (gcc version 4.8.2 (GCC) ) #1 SMP PREEMPT Fri Dec 20 19:54:53 CET 2013
[ 0.000000] Disabled fast string operations
[ 0.000000] e820: BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: [mem 0x0000000000000000-0x000000000009efff] usable
[ 0.000000] BIOS-e820: [mem 0x000000000009f000-0x000000000009ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x0000000000100000-0x000000001f7d37ff] usable
[ 0.000000] BIOS-e820: [mem 0x000000001f7d3800-0x000000001fffffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000e0000000-0x00000000f0006fff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000f0008000-0x00000000f000bfff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fec00000-0x00000000fec0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000fed20000-0x00000000fee0ffff] reserved
[ 0.000000] BIOS-e820: [mem 0x00000000ffb00000-0x00000000ffffffff] reserved
[ 0.000000] Notice: NX (Execute Disable) protection cannot be enabled: non-PAE kernel!
[ 0.000000] SMBIOS 2.3 present.
[ 0.000000] DMI: Dell Inc. Inspiron 2200 /0U6962, BIOS A07 12/01/2005
[ 0.000000] e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
[ 0.000000] e820: remove [mem 0x000a0000-0x000fffff] usable
[ 0.000000] e820: last_pfn = 0x1f7d3 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-CFFFF write-protect
[ 0.000000] D0000-EFFFF uncachable
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask FE0000000 write-back
[ 0.000000] 1 base 01F800000 mask FFF800000 uncachable
[ 0.000000] 2 base 0FEDA0000 mask FFFFE0000 write-through
[ 0.000000] 3 disabled
[ 0.000000] 4 disabled
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] PAT not supported by CPU.
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] initial memory mapped: [mem 0x00000000-0x01bfffff]
[ 0.000000] Base memory trampoline at [c009b000] 9b000 size 16384
[ 0.000000] init_memory_mapping: [mem 0x00000000-0x000fffff]
[ 0.000000] [mem 0x00000000-0x000fffff] page 4k
[ 0.000000] init_memory_mapping: [mem 0x1f000000-0x1f3fffff]
[ 0.000000] [mem 0x1f000000-0x1f3fffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x18000000-0x1effffff]
[ 0.000000] [mem 0x18000000-0x1effffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x00100000-0x17ffffff]
[ 0.000000] [mem 0x00100000-0x003fffff] page 4k
[ 0.000000] [mem 0x00400000-0x17ffffff] page 2M
[ 0.000000] init_memory_mapping: [mem 0x1f400000-0x1f7d2fff]
[ 0.000000] [mem 0x1f400000-0x1f7d2fff] page 4k
[ 0.000000] BRK [0x0177c000, 0x0177cfff] PGTABLE
[ 0.000000] RAMDISK: [mem 0x1e9af000-0x1ec8efff]
[ 0.000000] ACPI: RSDP 000fc9b0 00014 (v00 DELL )
[ 0.000000] ACPI: RSDT 1f7d4425 00038 (v01 DELL CPi R 27D50C01 ASL 00000061)
[ 0.000000] ACPI: FACP 1f7d4c00 00074 (v01 DELL CPi R 27D50C01 ASL 00000061)
[ 0.000000] ACPI: DSDT 1f7d5800 02D9A (v01 INT430 SYSFexxx 00001001 MSFT 0100000E)
[ 0.000000] ACPI: FACS 1f7e4000 00040
[ 0.000000] ACPI: APIC 1f7d5400 00068 (v01 DELL CPi R 27D50C01 ASL 00000047)
[ 0.000000] ACPI: MCFG 1f7d53c0 0003E (v16 DELL CPi R 27D50C01 ASL 00000061)
[ 0.000000] ACPI: SSDT 1f7d4658 001D8 (v01 PmRef Cpu0Cst 00003001 INTL 20030522)
[ 0.000000] ACPI: SSDT 1f7d445d 001FB (v01 PmRef CpuPm 00003000 INTL 20030522)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 503MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1f7d3000
[ 0.000000] low ram: 0 - 1f7d3000
[ 0.000000] BRK [0x0177d000, 0x0177dfff] PGTABLE
[ 0.000000] Zone ranges:
[ 0.000000] DMA [mem 0x00001000-0x00ffffff]
[ 0.000000] Normal [mem 0x01000000-0x1f7d2fff]
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start for each node
[ 0.000000] Early memory node ranges
[ 0.000000] node 0: [mem 0x00001000-0x0009efff]
[ 0.000000] node 0: [mem 0x00100000-0x1f7d2fff]
[ 0.000000] On node 0 totalpages: 128881
[ 0.000000] free_area_init_node: node 0, pgdat c15d6680, node_mem_map df3e3020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3998 pages, LIFO batch:0
[ 0.000000] Normal zone: 976 pages used for memmap
[ 0.000000] Normal zone: 124883 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x1008
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] disabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] smpboot: Allowing 2 CPUs, 1 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
[ 0.000000] PM: Registered nosave memory: [mem 0x000a0000-0x000fffff]
[ 0.000000] e820: [mem 0x20000000-0xdfffffff] available for PCI devices
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 14 pages/cpu @df3c3000 s33408 r0 d23936 u57344
[ 0.000000] pcpu-alloc: s33408 r0 d23936 u57344 alloc=14*4096
[ 0.000000] pcpu-alloc: [0] 0 [0] 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 127873
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-linux root=UUID=1ea77b37-4f05-412d-ac82-fa0302942b0a rw quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 1031824 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 499264K/515524K available (4325K kernel code, 435K rwdata, 1280K rodata, 612K init, 952K bss, 16260K reserved, 0K highmem)
[ 0.000000] virtual kernel memory layout:
fixmap : 0xfff15000 - 0xfffff000 ( 936 kB)
pkmap : 0xff800000 - 0xffc00000 (4096 kB)
vmalloc : 0xdffd3000 - 0xff7fe000 ( 504 MB)
lowmem : 0xc0000000 - 0xdf7d3000 ( 503 MB)
.init : 0xc15e8000 - 0xc1681000 ( 612 kB)
.data : 0xc1439b1e - 0xc15e7c80 (1720 kB)
.text : 0xc1000000 - 0xc1439b1e (4326 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Preemptible hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] Dump stacks of tasks blocking RCU-preempt GP.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
[ 0.000000] NR_IRQS:2304 nr_irqs:512 16
[ 0.000000] CPU 0 irqstacks, hard=de408000 soft=de40a000
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] tsc: Fast TSC calibration using PIT
[ 0.000000] tsc: Detected 1695.712 MHz processor
[ 0.003337] Calibrating delay loop (skipped), value calculated using timer frequency.. 3392.73 BogoMIPS (lpj=5652373)
[ 0.003344] pid_max: default: 32768 minimum: 301
[ 0.003408] Security Framework initialized
[ 0.003431] AppArmor: AppArmor disabled by boot time parameter
[ 0.003433] Yama: becoming mindful.
[ 0.003466] Mount-cache hash table entries: 512
[ 0.003846] Initializing cgroup subsys memory
[ 0.003868] Initializing cgroup subsys devices
[ 0.003873] Initializing cgroup subsys freezer
[ 0.003877] Initializing cgroup subsys net_cls
[ 0.003880] Initializing cgroup subsys blkio
[ 0.003924] Disabled fast string operations
[ 0.003935] mce: CPU supports 5 MCE banks
[ 0.003951] CPU0: Thermal monitoring enabled (TM1)
[ 0.003973] Last level iTLB entries: 4KB 128, 2MB 0, 4MB 2
Last level dTLB entries: 4KB 128, 2MB 0, 4MB 8
tlb_flushall_shift: 6
[ 0.012193] ACPI: Core revision 20130725
[ 0.014714] ACPI: All ACPI Tables successfully acquired
[ 0.016678] ftrace: allocating 19323 entries in 38 pages
[ 0.023514] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.023984] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.058943] smpboot: CPU0: Intel(R) Celeron(R) M processor 1.70GHz (fam: 06, model: 0d, stepping: 08)
[ 0.059999] Performance Events: p6 PMU driver.
[ 0.059999] ... version: 0
[ 0.059999] ... bit width: 32
[ 0.059999] ... generic registers: 2
[ 0.059999] ... value mask: 00000000ffffffff
[ 0.059999] ... max period: 000000007fffffff
[ 0.059999] ... fixed-purpose events: 0
[ 0.059999] ... event mask: 0000000000000003
[ 0.076688] Brought up 1 CPUs
[ 0.076696] smpboot: Total of 1 processors activated (3392.73 BogoMIPS)
[ 0.077595] NMI watchdog: enabled on all CPUs, permanently consumes one hw-PMU counter.
[ 0.077784] devtmpfs: initialized
[ 0.079834] RTC time: 16:30:00, date: 12/02/05
[ 0.079907] NET: Registered protocol family 16
[ 0.080131] cpuidle: using governor ladder
[ 0.080134] cpuidle: using governor menu
[ 0.080205] ACPI: bus type PCI registered
[ 0.080210] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.080305] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000)
[ 0.080310] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in E820
[ 0.080312] PCI: Using MMCONFIG for extended config space
[ 0.080314] PCI: Using configuration type 1 for base access
[ 0.080329] dmi type 0xB1 record - unknown flag
[ 0.081371] bio: create slab <bio-0> at 0
[ 0.081531] ACPI: Added _OSI(Module Device)
[ 0.081534] ACPI: Added _OSI(Processor Device)
[ 0.081537] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.081540] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.082264] ACPI: EC: Look up EC in DSDT
[ 0.086461] ACPI: Interpreter enabled
[ 0.086477] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20130725/hwxface-571)
[ 0.086484] ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20130725/hwxface-571)
[ 0.086503] ACPI: (supports S0 S3 S4 S5)
[ 0.086506] ACPI: Using IOAPIC for interrupt routing
[ 0.086543] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.086682] ACPI: No dock devices found.
[ 0.103158] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.103168] acpi PNP0A03:00: ACPI _OSC support notification failed, disabling PCIe ASPM
[ 0.103172] acpi PNP0A03:00: Unable to request _OSC control (_OSC support mask: 0x08)
[ 0.118369] acpi PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.118374] acpi PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.118377] acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.118381] acpi PNP0A03:00: host bridge window [mem 0x000d0000-0x000dffff] (ignored)
[ 0.118384] acpi PNP0A03:00: host bridge window [mem 0x20000000-0xdfffffff] (ignored)
[ 0.118388] acpi PNP0A03:00: host bridge window [mem 0xf0007000-0xf0007fff] (ignored)
[ 0.118391] acpi PNP0A03:00: host bridge window [mem 0xf000c000-0xfebfffff] (ignored)
[ 0.118395] acpi PNP0A03:00: host bridge window [mem 0xfec10000-0xfed1ffff] (ignored)
[ 0.118399] acpi PNP0A03:00: host bridge window [mem 0xfee10000-0xffafffff] (ignored)
[ 0.118402] PCI: root bus 00: using default resources
[ 0.118519] ACPI: \_SB_.PCI0.MB2_: can't evaluate _ADR (0x5)
[ 0.118523] ACPI: \_SB_.PCI0.MB3_: can't evaluate _ADR (0x5)
[ 0.118571] ACPI: \_SB_.PCI0.LNKA: can't evaluate _ADR (0x5)
[ 0.118575] ACPI: \_SB_.PCI0.LNKB: can't evaluate _ADR (0x5)
[ 0.118578] ACPI: \_SB_.PCI0.LNKC: can't evaluate _ADR (0x5)
[ 0.118581] ACPI: \_SB_.PCI0.LNKD: can't evaluate _ADR (0x5)
[ 0.118585] ACPI: \_SB_.PCI0.LNKE: can't evaluate _ADR (0x5)
[ 0.118588] ACPI: \_SB_.PCI0.LNKF: can't evaluate _ADR (0x5)
[ 0.118592] ACPI: \_SB_.PCI0.LNKH: can't evaluate _ADR (0x5)
[ 0.118629] ACPI: \_SB_.PCI0.MB7_: can't evaluate _ADR (0x5)
[ 0.118638] PCI host bridge to bus 0000:00
[ 0.118643] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.118646] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
[ 0.118650] pci_bus 0000:00: root bus resource [mem 0x00000000-0xffffffff]
[ 0.118664] pci 0000:00:00.0: [8086:2590] type 00 class 0x060000
[ 0.118801] pci 0000:00:02.0: [8086:2592] type 00 class 0x030000
[ 0.118815] pci 0000:00:02.0: reg 0x10: [mem 0xdff00000-0xdff7ffff]
[ 0.118823] pci 0000:00:02.0: reg 0x14: [io 0xec38-0xec3f]
[ 0.118831] pci 0000:00:02.0: reg 0x18: [mem 0xc0000000-0xcfffffff pref]
[ 0.118839] pci 0000:00:02.0: reg 0x1c: [mem 0xdfec0000-0xdfefffff]
[ 0.118957] pci 0000:00:02.1: [8086:2792] type 00 class 0x038000
[ 0.118968] pci 0000:00:02.1: reg 0x10: [mem 0xdff80000-0xdfffffff]
[ 0.119150] pci 0000:00:1d.0: [8086:2658] type 00 class 0x0c0300
[ 0.119207] pci 0000:00:1d.0: reg 0x20: [io 0xbf80-0xbf9f]
[ 0.119307] pci 0000:00:1d.0: System wakeup disabled by ACPI
[ 0.119366] pci 0000:00:1d.1: [8086:2659] type 00 class 0x0c0300
[ 0.119424] pci 0000:00:1d.1: reg 0x20: [io 0xbf60-0xbf7f]
[ 0.119520] pci 0000:00:1d.1: System wakeup disabled by ACPI
[ 0.119582] pci 0000:00:1d.2: [8086:265a] type 00 class 0x0c0300
[ 0.119640] pci 0000:00:1d.2: reg 0x20: [io 0xbf40-0xbf5f]
[ 0.119736] pci 0000:00:1d.2: System wakeup disabled by ACPI
[ 0.119797] pci 0000:00:1d.3: [8086:265b] type 00 class 0x0c0300
[ 0.119856] pci 0000:00:1d.3: reg 0x20: [io 0xbf20-0xbf3f]
[ 0.119951] pci 0000:00:1d.3: System wakeup disabled by ACPI
[ 0.120025] pci 0000:00:1d.7: [8086:265c] type 00 class 0x0c0320
[ 0.120051] pci 0000:00:1d.7: reg 0x10: [mem 0xffa80800-0xffa80bff]
[ 0.120160] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.120243] pci 0000:00:1d.7: System wakeup disabled by ACPI
[ 0.120312] pci 0000:00:1e.0: [8086:2448] type 01 class 0x060401
[ 0.120441] pci 0000:00:1e.0: System wakeup disabled by ACPI
[ 0.120505] pci 0000:00:1e.2: [8086:266e] type 00 class 0x040100
[ 0.120528] pci 0000:00:1e.2: reg 0x10: [io 0xed00-0xedff]
[ 0.120541] pci 0000:00:1e.2: reg 0x14: [io 0xec40-0xec7f]
[ 0.120555] pci 0000:00:1e.2: reg 0x18: [mem 0xdfebfe00-0xdfebffff]
[ 0.120568] pci 0000:00:1e.2: reg 0x1c: [mem 0xdfebfd00-0xdfebfdff]
[ 0.120634] pci 0000:00:1e.2: PME# supported from D0 D3hot D3cold
[ 0.120741] pci 0000:00:1e.3: [8086:266d] type 00 class 0x070300
[ 0.120764] pci 0000:00:1e.3: reg 0x10: [io 0xee00-0xeeff]
[ 0.120777] pci 0000:00:1e.3: reg 0x14: [io 0xec80-0xecff]
[ 0.120864] pci 0000:00:1e.3: PME# supported from D0 D3hot D3cold
[ 0.120923] pci 0000:00:1e.3: System wakeup disabled by ACPI
[ 0.120987] pci 0000:00:1f.0: [8086:2641] type 00 class 0x060100
[ 0.121103] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 0.121117] pci 0000:00:1f.0: quirk: [io 0x1000-0x107f] claimed by ICH6 ACPI/GPIO/TCO
[ 0.121124] pci 0000:00:1f.0: quirk: [io 0x1080-0x10bf] claimed by ICH6 GPIO
[ 0.121130] pci 0000:00:1f.0: LPC Generic IO decode 1 PIO at 0900-097f
[ 0.121234] pci 0000:00:1f.1: [8086:266f] type 00 class 0x01018a
[ 0.121253] pci 0000:00:1f.1: reg 0x10: [io 0x01f0-0x01f7]
[ 0.121266] pci 0000:00:1f.1: reg 0x14: [io 0x03f4-0x03f7]
[ 0.121280] pci 0000:00:1f.1: reg 0x18: [io 0x0170-0x0177]
[ 0.121293] pci 0000:00:1f.1: reg 0x1c: [io 0x0374-0x0377]
[ 0.121307] pci 0000:00:1f.1: reg 0x20: [io 0xbfa0-0xbfaf]
[ 0.121430] pci 0000:00:1f.3: [8086:266a] type 00 class 0x0c0500
[ 0.121506] pci 0000:00:1f.3: reg 0x20: [io 0x10c0-0x10df]
[ 0.121732] pci 0000:02:01.0: [104c:ac56] type 02 class 0x060700
[ 0.121757] pci 0000:02:01.0: reg 0x10: [mem 0x00000000-0x00000fff]
[ 0.121801] pci 0000:02:01.0: supports D1 D2
[ 0.121805] pci 0000:02:01.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.121888] pci 0000:02:03.0: [14e4:4318] type 00 class 0x028000
[ 0.121907] pci 0000:02:03.0: reg 0x10: [mem 0xdfdfe000-0xdfdfffff]
[ 0.122049] pci 0000:02:08.0: [8086:1068] type 00 class 0x020000
[ 0.122073] pci 0000:02:08.0: reg 0x10: [mem 0xdfdfd000-0xdfdfdfff]
[ 0.122086] pci 0000:02:08.0: reg 0x14: [io 0xdf40-0xdf7f]
[ 0.122175] pci 0000:02:08.0: supports D1 D2
[ 0.122178] pci 0000:02:08.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.122287] pci 0000:00:1e.0: PCI bridge to [bus 02-03] (subtractive decode)
[ 0.122293] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.122299] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.122308] pci 0000:00:1e.0: bridge window [io 0x0000-0xffff] (subtractive decode)
[ 0.122312] pci 0000:00:1e.0: bridge window [mem 0x00000000-0xffffffff] (subtractive decode)
[ 0.122388] pci_bus 0000:03: busn_res: can not insert [bus 03-ff] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.122394] pci_bus 0000:03: busn_res: [bus 03-ff] end is updated to 06
[ 0.122399] pci_bus 0000:03: busn_res: can not insert [bus 03-06] under [bus 02-03] (conflicts with (null) [bus 02-03])
[ 0.122405] pci_bus 0000:03: [bus 03-06] partially hidden behind transparent bridge 0000:02 [bus 02-03]
[ 0.122419] pci_bus 0000:00: on NUMA node 0
[ 0.122631] ACPI: PCI Interrupt Link [LNKA] (IRQs 9 10 *11)
[ 0.122757] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7) *10
[ 0.122881] ACPI: PCI Interrupt Link [LNKC] (IRQs *9 10 11)
[ 0.123003] ACPI: PCI Interrupt Link [LNKD] (IRQs *5 7 9 10 11)
[ 0.123127] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 *4 5 6 7 9 10 11 12 14 15)
[ 0.123238] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.123356] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 0.123730] ACPI: Enabled 2 GPEs in block 00 to 1F
[ 0.123805] ACPI: \_SB_.PCI0: notify handler is installed
[ 0.123844] Found 1 acpi root devices
[ 0.123976] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.123982] vgaarb: loaded
[ 0.123984] vgaarb: bridge control possible 0000:00:02.0
[ 0.124048] PCI: Using ACPI for IRQ routing
[ 0.135127] PCI: pci_cache_line_size set to 64 bytes
[ 0.135189] e820: reserve RAM buffer [mem 0x0009f000-0x0009ffff]
[ 0.135192] e820: reserve RAM buffer [mem 0x1f7d3800-0x1fffffff]
[ 0.135363] NetLabel: Initializing
[ 0.135366] NetLabel: domain hash size = 128
[ 0.135367] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.135386] NetLabel: unlabeled traffic allowed by default
[ 0.135576] hpet clockevent registered
[ 0.135581] HPET: 3 timers in total, 0 timers will be used for per-cpu timer
[ 0.135588] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.135594] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.136700] Switched to clocksource hpet
[ 0.145683] pnp: PnP ACPI init
[ 0.145720] ACPI: bus type PNP registered
[ 0.155581] system 00:00: [mem 0x00000000-0x0009fbff] could not be reserved
[ 0.155587] system 00:00: [mem 0x0009fc00-0x0009ffff] could not be reserved
[ 0.155591] system 00:00: [mem 0x000c0000-0x000cffff] could not be reserved
[ 0.155595] system 00:00: [mem 0x000e0000-0x000fffff] could not be reserved
[ 0.155599] system 00:00: [mem 0x00100000-0x1f7d37ff] could not be reserved
[ 0.155603] system 00:00: [mem 0x1f7d3800-0x1f7fffff] has been reserved
[ 0.155607] system 00:00: [mem 0x1f800000-0x1fffffff] has been reserved
[ 0.155611] system 00:00: [mem 0xfeda0000-0xfedfffff] has been reserved
[ 0.155615] system 00:00: [mem 0xffb00000-0xffffffff] has been reserved
[ 0.155619] system 00:00: [mem 0xfec00000-0xfec0ffff] could not be reserved
[ 0.155623] system 00:00: [mem 0xfee00000-0xfee0ffff] has been reserved
[ 0.155627] system 00:00: [mem 0xfed20000-0xfed9ffff] has been reserved
[ 0.155631] system 00:00: [mem 0xf0000000-0xf0003fff] has been reserved
[ 0.155635] system 00:00: [mem 0xf0004000-0xf0004fff] has been reserved
[ 0.155649] system 00:00: [mem 0xf0005000-0xf0005fff] has been reserved
[ 0.155653] system 00:00: [mem 0xf0006000-0xf0006fff] has been reserved
[ 0.155657] system 00:00: [mem 0xf0008000-0xf000bfff] has been reserved
[ 0.155660] system 00:00: [mem 0xe0000000-0xefffffff] has been reserved
[ 0.155668] system 00:00: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155730] pnp 00:01: disabling [io 0x1000-0x1005] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.155734] pnp 00:01: disabling [io 0x1008-0x100f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.155776] system 00:01: [io 0x04d0-0x04d1] has been reserved
[ 0.155781] system 00:01: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155818] pnp 00:02: disabling [io 0x1006-0x1007] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.155823] pnp 00:02: disabling [io 0x100a-0x1059] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.155827] pnp 00:02: disabling [io 0x1060-0x107f] because it overlaps 0000:00:1f.0 BAR 13 [io 0x1000-0x107f]
[ 0.155864] system 00:02: [io 0xf400-0xf4fe] has been reserved
[ 0.155869] system 00:02: [io 0x1080-0x10bf] has been reserved
[ 0.155872] system 00:02: [io 0x10c0-0x10df] has been reserved
[ 0.155876] system 00:02: [io 0x10e0-0x10ff] could not be reserved
[ 0.155881] system 00:02: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.155961] pnp 00:03: Plug and Play ACPI device, IDs PNP0f13 (active)
[ 0.156020] pnp 00:04: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.156074] pnp 00:05: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.156133] pnp 00:06: Plug and Play ACPI device, IDs PNP0800 (active)
[ 0.156198] system 00:07: [io 0x0900-0x090f] has been reserved
[ 0.156202] system 00:07: [io 0x0910-0x091f] has been reserved
[ 0.156206] system 00:07: [io 0x0920-0x092f] has been reserved
[ 0.156210] system 00:07: [io 0x0930-0x093f] has been reserved
[ 0.156214] system 00:07: [io 0x0940-0x097f] has been reserved
[ 0.156219] system 00:07: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.156245] pnp 00:08: [dma 4]
[ 0.156291] pnp 00:08: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.156350] pnp 00:09: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.157119] pnp 00:0a: disabling [io 0xd3b0-0xd3bb] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157124] pnp 00:0a: disabling [io 0xd3c0-0xd3df] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157129] pnp 00:0a: disabling [io 0xd7b0-0xd7bb] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157133] pnp 00:0a: disabling [io 0xd7c0-0xd7df] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157138] pnp 00:0a: disabling [io 0xdbb0-0xdbbb] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157143] pnp 00:0a: disabling [io 0xdbc0-0xdbdf] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157147] pnp 00:0a: disabling [io 0xdfb0-0xdfbb] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157152] pnp 00:0a: disabling [io 0xdfc0-0xdfdf] because it overlaps 0000:00:1e.0 BAR 13 [io 0xd000-0xdfff]
[ 0.157612] system 00:0a: [io 0x07b0-0x07bb] has been reserved
[ 0.157616] system 00:0a: [io 0x07c0-0x07df] has been reserved
[ 0.157620] system 00:0a: [io 0x0bb0-0x0bbb] has been reserved
[ 0.157623] system 00:0a: [io 0x0bc0-0x0bdf] has been reserved
[ 0.157627] system 00:0a: [io 0x0fb0-0x0fbb] has been reserved
[ 0.157631] system 00:0a: [io 0x0fc0-0x0fdf] has been reserved
[ 0.157635] system 00:0a: [io 0x13b0-0x13bb] has been reserved
[ 0.157638] system 00:0a: [io 0x13c0-0x13df] has been reserved
[ 0.157642] system 00:0a: [io 0x17b0-0x17bb] has been reserved
[ 0.157646] system 00:0a: [io 0x17c0-0x17df] has been reserved
[ 0.157649] system 00:0a: [io 0x1bb0-0x1bbb] has been reserved
[ 0.157653] system 00:0a: [io 0x1bc0-0x1bdf] has been reserved
[ 0.157657] system 00:0a: [io 0x1fb0-0x1fbb] has been reserved
[ 0.157661] system 00:0a: [io 0x1fc0-0x1fdf] has been reserved
[ 0.157664] system 00:0a: [io 0x23b0-0x23bb] has been reserved
[ 0.157668] system 00:0a: [io 0x23c0-0x23df] has been reserved
[ 0.157672] system 00:0a: [io 0x27b0-0x27bb] has been reserved
[ 0.157676] system 00:0a: [io 0x27c0-0x27df] has been reserved
[ 0.157679] system 00:0a: [io 0x2bb0-0x2bbb] has been reserved
[ 0.157683] system 00:0a: [io 0x2bc0-0x2bdf] has been reserved
[ 0.157687] system 00:0a: [io 0x2fb0-0x2fbb] has been reserved
[ 0.157691] system 00:0a: [io 0x2fc0-0x2fdf] has been reserved
[ 0.157695] system 00:0a: [io 0x33b0-0x33bb] has been reserved
[ 0.157698] system 00:0a: [io 0x33c0-0x33df] has been reserved
[ 0.157702] system 00:0a: [io 0x37b0-0x37bb] has been reserved
[ 0.157706] system 00:0a: [io 0x37c0-0x37df] has been reserved
[ 0.157710] system 00:0a: [io 0x3bb0-0x3bbb] has been reserved
[ 0.157714] system 00:0a: [io 0x3bc0-0x3bdf] has been reserved
[ 0.157717] system 00:0a: [io 0x3fb0-0x3fbb] has been reserved
[ 0.157721] system 00:0a: [io 0x3fc0-0x3fdf] has been reserved
[ 0.157725] system 00:0a: [io 0x43b0-0x43bb] has been reserved
[ 0.157729] system 00:0a: [io 0x43c0-0x43df] has been reserved
[ 0.157733] system 00:0a: [io 0x47b0-0x47bb] has been reserved
[ 0.157737] system 00:0a: [io 0x47c0-0x47df] has been reserved
[ 0.157741] system 00:0a: [io 0x4bb0-0x4bbb] has been reserved
[ 0.157745] system 00:0a: [io 0x4bc0-0x4bdf] has been reserved
[ 0.157748] system 00:0a: [io 0x4fb0-0x4fbb] has been reserved
[ 0.157752] system 00:0a: [io 0x4fc0-0x4fdf] has been reserved
[ 0.157756] system 00:0a: [io 0x53b0-0x53bb] has been reserved
[ 0.157760] system 00:0a: [io 0x53c0-0x53df] has been reserved
[ 0.157764] system 00:0a: [io 0x57b0-0x57bb] has been reserved
[ 0.157768] system 00:0a: [io 0x57c0-0x57df] has been reserved
[ 0.157772] system 00:0a: [io 0x5bb0-0x5bbb] has been reserved
[ 0.157776] system 00:0a: [io 0x5bc0-0x5bdf] has been reserved
[ 0.157780] system 00:0a: [io 0x5fb0-0x5fbb] has been reserved
[ 0.157784] system 00:0a: [io 0x5fc0-0x5fdf] has been reserved
[ 0.157788] system 00:0a: [io 0x63b0-0x63bb] has been reserved
[ 0.157792] system 00:0a: [io 0x63c0-0x63df] has been reserved
[ 0.157795] system 00:0a: [io 0x67b0-0x67bb] has been reserved
[ 0.157804] system 00:0a: [io 0x67c0-0x67df] has been reserved
[ 0.157808] system 00:0a: [io 0x6bb0-0x6bbb] has been reserved
[ 0.157812] system 00:0a: [io 0x6bc0-0x6bdf] has been reserved
[ 0.157816] system 00:0a: [io 0x6fb0-0x6fbb] has been reserved
[ 0.157820] system 00:0a: [io 0x6fc0-0x6fdf] has been reserved
[ 0.157824] system 00:0a: [io 0x73b0-0x73bb] has been reserved
[ 0.157828] system 00:0a: [io 0x73c0-0x73df] has been reserved
[ 0.157832] system 00:0a: [io 0x77b0-0x77bb] has been reserved
[ 0.157836] system 00:0a: [io 0x77c0-0x77df] has been reserved
[ 0.157840] system 00:0a: [io 0x7bb0-0x7bbb] has been reserved
[ 0.157844] system 00:0a: [io 0x7bc0-0x7bdf] has been reserved
[ 0.157848] system 00:0a: [io 0x7fb0-0x7fbb] has been reserved
[ 0.157852] system 00:0a: [io 0x7fc0-0x7fdf] has been reserved
[ 0.157856] system 00:0a: [io 0x83b0-0x83bb] has been reserved
[ 0.157860] system 00:0a: [io 0x83c0-0x83df] has been reserved
[ 0.157864] system 00:0a: [io 0x87b0-0x87bb] has been reserved
[ 0.157868] system 00:0a: [io 0x87c0-0x87df] has been reserved
[ 0.157872] system 00:0a: [io 0x8bb0-0x8bbb] has been reserved
[ 0.157876] system 00:0a: [io 0x8bc0-0x8bdf] has been reserved
[ 0.157880] system 00:0a: [io 0x8fb0-0x8fbb] has been reserved
[ 0.157884] system 00:0a: [io 0x8fc0-0x8fdf] has been reserved
[ 0.157888] system 00:0a: [io 0x93b0-0x93bb] has been reserved
[ 0.157892] system 00:0a: [io 0x93c0-0x93df] has been reserved
[ 0.157896] system 00:0a: [io 0x97b0-0x97bb] has been reserved
[ 0.157901] system 00:0a: [io 0x97c0-0x97df] has been reserved
[ 0.157905] system 00:0a: [io 0x9bb0-0x9bbb] has been reserved
[ 0.157909] system 00:0a: [io 0x9bc0-0x9bdf] has been reserved
[ 0.157913] system 00:0a: [io 0x9fb0-0x9fbb] has been reserved
[ 0.157917] system 00:0a: [io 0x9fc0-0x9fdf] has been reserved
[ 0.157921] system 00:0a: [io 0xa3b0-0xa3bb] has been reserved
[ 0.157925] system 00:0a: [io 0xa3c0-0xa3df] has been reserved
[ 0.157930] system 00:0a: [io 0xa7b0-0xa7bb] has been reserved
[ 0.157934] system 00:0a: [io 0xa7c0-0xa7df] has been reserved
[ 0.157938] system 00:0a: [io 0xabb0-0xabbb] has been reserved
[ 0.157942] system 00:0a: [io 0xabc0-0xabdf] has been reserved
[ 0.157946] system 00:0a: [io 0xafb0-0xafbb] has been reserved
[ 0.157950] system 00:0a: [io 0xafc0-0xafdf] has been reserved
[ 0.157955] system 00:0a: [io 0xb3b0-0xb3bb] has been reserved
[ 0.157959] system 00:0a: [io 0xb3c0-0xb3df] has been reserved
[ 0.157963] system 00:0a: [io 0xb7b0-0xb7bb] has been reserved
[ 0.157967] system 00:0a: [io 0xb7c0-0xb7df] has been reserved
[ 0.157971] system 00:0a: [io 0xbbb0-0xbbbb] has been reserved
[ 0.157976] system 00:0a: [io 0xbbc0-0xbbdf] has been reserved
[ 0.157980] system 00:0a: [io 0xbfb0-0xbfbb] has been reserved
[ 0.157984] system 00:0a: [io 0xbfc0-0xbfdf] has been reserved
[ 0.157988] system 00:0a: [io 0xc3b0-0xc3bb] has been reserved
[ 0.157993] system 00:0a: [io 0xc3c0-0xc3df] has been reserved
[ 0.157997] system 00:0a: [io 0xc7b0-0xc7bb] has been reserved
[ 0.158001] system 00:0a: [io 0xc7c0-0xc7df] has been reserved
[ 0.158005] system 00:0a: [io 0xcbb0-0xcbbb] has been reserved
[ 0.158010] system 00:0a: [io 0xcbc0-0xcbdf] has been reserved
[ 0.158014] system 00:0a: [io 0xcfb0-0xcfbb] has been reserved
[ 0.158018] system 00:0a: [io 0xcfc0-0xcfdf] has been reserved
[ 0.158026] system 00:0a: [io 0xe3b0-0xe3bb] has been reserved
[ 0.158030] system 00:0a: [io 0xe3c0-0xe3df] has been reserved
[ 0.158034] system 00:0a: [io 0xe7b0-0xe7bb] has been reserved
[ 0.158039] system 00:0a: [io 0xe7c0-0xe7df] has been reserved
[ 0.158043] system 00:0a: [io 0xebb0-0xebbb] has been reserved
[ 0.158048] system 00:0a: [io 0xebc0-0xebdf] has been reserved
[ 0.158052] system 00:0a: [io 0xefb0-0xefbb] has been reserved
[ 0.158056] system 00:0a: [io 0xefc0-0xefdf] has been reserved
[ 0.158061] system 00:0a: [io 0xf3b0-0xf3bb] has been reserved
[ 0.158065] system 00:0a: [io 0xf3c0-0xf3df] has been reserved
[ 0.158070] system 00:0a: [io 0xf7b0-0xf7bb] has been reserved
[ 0.158074] system 00:0a: [io 0xf7c0-0xf7df] has been reserved
[ 0.158079] system 00:0a: [io 0xfbb0-0xfbbb] has been reserved
[ 0.158083] system 00:0a: [io 0xfbc0-0xfbdf] has been reserved
[ 0.158088] system 00:0a: [io 0xffb0-0xffbb] has been reserved
[ 0.158092] system 00:0a: [io 0xffc0-0xffdf] has been reserved
[ 0.158098] system 00:0a: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.158112] pnp: PnP ACPI: found 11 devices
[ 0.158114] ACPI: bus type PNP unregistered
[ 0.195319] pci 0000:02:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.195329] pci 0000:00:1e.0: bridge window [mem 0x04000000-0x03ffffff pref] to [bus 02-03] add_size 4000000
[ 0.195340] pci 0000:00:1e.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.195348] pci 0000:00:1e.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.195356] pci 0000:02:01.0: res[15]=[mem 0x04000000-0x03ffffff pref] get_res_add_size add_size 4000000
[ 0.195360] pci 0000:02:01.0: res[16]=[mem 0x04000000-0x03ffffff] get_res_add_size add_size 4000000
[ 0.195364] pci 0000:02:01.0: res[13]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.195368] pci 0000:02:01.0: res[14]=[io 0x0100-0x00ff] get_res_add_size add_size 100
[ 0.195372] pci 0000:02:01.0: BAR 0: assigned [mem 0x24000000-0x24000fff]
[ 0.195382] pci 0000:02:01.0: BAR 15: assigned [mem 0x20000000-0x23ffffff pref]
[ 0.195386] pci 0000:02:01.0: BAR 16: assigned [mem 0x28000000-0x2bffffff]
[ 0.195390] pci 0000:02:01.0: BAR 13: assigned [io 0xd000-0xd0ff]
[ 0.195393] pci 0000:02:01.0: BAR 14: assigned [io 0xd400-0xd4ff]
[ 0.195398] pci 0000:02:01.0: CardBus bridge to [bus 03-06]
[ 0.195401] pci 0000:02:01.0: bridge window [io 0xd000-0xd0ff]
[ 0.195408] pci 0000:02:01.0: bridge window [io 0xd400-0xd4ff]
[ 0.195415] pci 0000:02:01.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.195422] pci 0000:02:01.0: bridge window [mem 0x28000000-0x2bffffff]
[ 0.195429] pci 0000:00:1e.0: PCI bridge to [bus 02-03]
[ 0.195434] pci 0000:00:1e.0: bridge window [io 0xd000-0xdfff]
[ 0.195442] pci 0000:00:1e.0: bridge window [mem 0xdfd00000-0xdfdfffff]
[ 0.195448] pci 0000:00:1e.0: bridge window [mem 0x20000000-0x23ffffff pref]
[ 0.195458] pci_bus 0000:00: resource 4 [io 0x0000-0xffff]
[ 0.195462] pci_bus 0000:00: resource 5 [mem 0x00000000-0xffffffff]
[ 0.195466] pci_bus 0000:02: resource 0 [io 0xd000-0xdfff]
[ 0.195469] pci_bus 0000:02: resource 1 [mem 0xdfd00000-0xdfdfffff]
[ 0.195473] pci_bus 0000:02: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.195476] pci_bus 0000:02: resource 4 [io 0x0000-0xffff]
[ 0.195480] pci_bus 0000:02: resource 5 [mem 0x00000000-0xffffffff]
[ 0.195483] pci_bus 0000:03: resource 0 [io 0xd000-0xd0ff]
[ 0.195487] pci_bus 0000:03: resource 1 [io 0xd400-0xd4ff]
[ 0.195490] pci_bus 0000:03: resource 2 [mem 0x20000000-0x23ffffff pref]
[ 0.195494] pci_bus 0000:03: resource 3 [mem 0x28000000-0x2bffffff]
[ 0.195566] NET: Registered protocol family 2
[ 0.195842] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195881] TCP bind hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.195912] TCP: Hash tables configured (established 4096 bind 4096)
[ 0.195944] TCP: reno registered
[ 0.195948] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.195958] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.196057] NET: Registered protocol family 1
[ 0.196082] pci 0000:00:02.0: Boot video device
[ 0.198013] pci 0000:02:08.0: Firmware left e100 interrupts enabled; disabling
[ 0.198020] PCI: CLS 64 bytes, default 64
[ 0.198109] Unpacking initramfs...
[ 0.298578] Freeing initrd memory: 2944K (de9af000 - dec8f000)
[ 0.298752] apm: BIOS not found.
[ 0.298829] Scanning for low memory corruption every 60 seconds
[ 0.299444] audit: initializing netlink socket (disabled)
[ 0.299469] type=2000 audit(1133541000.296:1): initialized
[ 0.316577] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.318771] zbud: loaded
[ 0.318915] VFS: Disk quotas dquot_6.5.2
[ 0.319000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.319305] msgmni has been set to 980
[ 0.319650] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
[ 0.319691] io scheduler noop registered
[ 0.319693] io scheduler deadline registered
[ 0.319747] io scheduler cfq registered (default)
[ 0.319887] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.319914] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.320032] vesafb: mode is 1024x768x32, linelength=4096, pages=0
[ 0.320034] vesafb: scrolling: redraw
[ 0.320038] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.320208] vesafb: framebuffer at 0xc0000000, mapped to 0xe0000000, using 3072k, total 3072k
[ 0.361088] Console: switching to colour frame buffer device 128x48
[ 0.400929] fb0: VESA VGA frame buffer device
[ 0.400953] intel_idle: does not run on family 6 model 13
[ 0.400999] GHES: HEST is not enabled!
[ 0.401017] isapnp: Scanning for PnP cards...
[ 0.714052] isapnp: No Plug & Play device found
[ 0.714124] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 0.715322] i8042: PNP: PS/2 Controller [PNP0303:KBC,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.719975] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.720044] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.720176] mousedev: PS/2 mouse device common for all mice
[ 0.720505] rtc_cmos 00:05: rtc core: registered rtc_cmos as rtc0
[ 0.720542] rtc_cmos 00:05: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.720656] drop_monitor: Initializing network drop monitor service
[ 0.720788] TCP: cubic registered
[ 0.721001] NET: Registered protocol family 10
[ 0.721277] NET: Registered protocol family 17
[ 0.721295] Key type dns_resolver registered
[ 0.721476] Using IPI No-Shortcut mode
[ 0.721597] registered taskstats version 1
[ 0.721889] Magic number: 1:361:539
[ 0.721990] rtc_cmos 00:05: setting system clock to 2005-12-02 16:30:01 UTC (1133541001)
[ 0.722052] PM: Hibernation image not present or could not be loaded.
[ 0.722537] Freeing unused kernel memory: 612K (c15e8000 - c1681000)
[ 0.722565] Write protecting the kernel text: 4328k
[ 0.722601] Write protecting the kernel read-only data: 1284k
[ 0.724539] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.740162] systemd-udevd[41]: starting version 208
[ 0.794552] ACPI: bus type USB registered
[ 0.794600] usbcore: registered new interface driver usbfs
[ 0.794617] usbcore: registered new interface driver hub
[ 0.797519] usbcore: registered new device driver usb
[ 0.798409] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.798878] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.799189] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.799196] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.799208] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 0.799269] uhci_hcd 0000:00:1d.0: irq 16, io base 0x0000bf80
[ 0.800221] hub 1-0:1.0: USB hub found
[ 0.800900] hub 1-0:1.0: 2 ports detected
[ 0.801737] ehci-pci: EHCI PCI platform driver
[ 0.802153] ehci-pci 0000:00:1d.7: setting latency timer to 64
[ 0.802310] ehci-pci 0000:00:1d.7: EHCI Host Controller
[ 0.802319] ehci-pci 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 0.802337] ehci-pci 0000:00:1d.7: debug port 1
[ 0.806249] ehci-pci 0000:00:1d.7: cache line size of 64 is not supported
[ 0.806261] ehci-pci 0000:00:1d.7: irq 16, io mem 0xffa80800
[ 0.811120] SCSI subsystem initialized
[ 0.815534] ehci-pci 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.816328] hub 2-0:1.0: USB hub found
[ 0.816344] hub 2-0:1.0: 8 ports detected
[ 0.822812] libata version 3.00 loaded.
[ 0.840154] hub 1-0:1.0: USB hub found
[ 0.840171] hub 1-0:1.0: 2 ports detected
[ 0.840775] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.840781] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.840792] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.840849] uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000bf60
[ 0.841131] hub 3-0:1.0: USB hub found
[ 0.841142] hub 3-0:1.0: 2 ports detected
[ 0.841510] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.841515] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.841523] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.841569] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000bf40
[ 0.841792] hub 4-0:1.0: USB hub found
[ 0.841802] hub 4-0:1.0: 2 ports detected
[ 0.841974] ata_piix 0000:00:1f.1: version 2.13
[ 0.842212] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.846327] scsi0 : ata_piix
[ 0.849479] scsi1 : ata_piix
[ 0.849561] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xbfa0 irq 14
[ 0.849565] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xbfa8 irq 15
[ 0.850360] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.850367] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.850377] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.850431] uhci_hcd 0000:00:1d.3: irq 19, io base 0x0000bf20
[ 0.850702] hub 5-0:1.0: USB hub found
[ 0.850714] hub 5-0:1.0: 2 ports detected
[ 0.853261] ata2: port disabled--ignoring
[ 1.017261] ata1.00: ATA-6: FUJITSU MHV2040AH, 00000096, max UDMA/100
[ 1.017267] ata1.00: 78140160 sectors, multi 8: LBA
[ 1.017275] ata1.01: ATAPI: HL-DT-STCD-RW/DVD-ROM GCC-4244N, B101, max UDMA/33
[ 1.030469] ata1.00: configured for UDMA/100
[ 1.043650] ata1.01: configured for UDMA/33
[ 1.047752] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHV2040A 0000 PQ: 0 ANSI: 5
[ 1.052402] scsi 0:0:1:0: CD-ROM HL-DT-ST CDRW/DVD GCC4244 B101 PQ: 0 ANSI: 5
[ 1.056877] sd 0:0:0:0: [sda] 78140160 512-byte logical blocks: (40.0 GB/37.2 GiB)
[ 1.056959] sd 0:0:0:0: [sda] Write Protect is off
[ 1.056963] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.056996] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.086053] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray
[ 1.086060] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.086608] sr 0:0:1:0: Attached scsi CD-ROM sr0
[ 1.147009] sda: sda1 sda2 sda3 sda4 sda5
[ 1.148544] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.300030] tsc: Refined TSC clocksource calibration: 1695.749 MHz
[ 1.914175] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.300077] Switched to clocksource tsc
[ 2.590447] systemd[1]: systemd 208 running in system mode. (+PAM -LIBWRAP -AUDIT -SELINUX -IMA -SYSVINIT +LIBCRYPTSETUP +GCRYPT +ACL +XZ)
[ 2.601980] systemd[1]: Set hostname to <amycus>.
[ 3.575622] systemd[1]: Cannot add dependency job for unit display-manager.service, ignoring: Unit display-manager.service failed to load: No such file or directory.
[ 3.576065] systemd[1]: Starting Forward Password Requests to Wall Directory Watch.
[ 3.576169] systemd[1]: Started Forward Password Requests to Wall Directory Watch.
[ 3.576193] systemd[1]: Starting Remote File Systems.
[ 3.576214] systemd[1]: Reached target Remote File Systems.
[ 3.576230] systemd[1]: Starting /dev/initctl Compatibility Named Pipe.
[ 3.576273] systemd[1]: Listening on /dev/initctl Compatibility Named Pipe.
[ 3.576289] systemd[1]: Starting Device-mapper event daemon FIFOs.
[ 3.576327] systemd[1]: Listening on Device-mapper event daemon FIFOs.
[ 3.576342] systemd[1]: Starting LVM2 metadata daemon socket.
[ 3.576396] systemd[1]: Listening on LVM2 metadata daemon socket.
[ 3.576411] systemd[1]: Starting Delayed Shutdown Socket.
[ 3.576445] systemd[1]: Listening on Delayed Shutdown Socket.
[ 3.576470] systemd[1]: Starting Dispatch Password Requests to Console Directory Watch.
[ 3.576520] systemd[1]: Started Dispatch Password Requests to Console Directory Watch.
[ 3.576535] systemd[1]: Starting Paths.
[ 3.576551] systemd[1]: Reached target Paths.
[ 3.576568] systemd[1]: Starting Journal Socket.
[ 3.576636] systemd[1]: Listening on Journal Socket.
[ 3.585193] systemd[1]: Starting Apply Kernel Variables...
[ 3.605471] systemd[1]: Starting Create list of required static device nodes for the current kernel...
[ 3.605993] systemd[1]: Starting Setup Virtual Console...
[ 3.606504] systemd[1]: Starting Journal Service...
[ 3.607153] systemd[1]: Started Journal Service.
[ 4.079977] systemd-journald[91]: Vacuuming done, freed 0 bytes
[ 4.428227] EXT4-fs (sda4): re-mounted. Opts: data=ordered
[ 4.761540] systemd-udevd[121]: starting version 208
[ 5.340036] tsc: Marking TSC unstable due to TSC halts in idle
[ 5.340108] ACPI: acpi_idle registered with cpuidle
[ 5.343558] Switched to clocksource hpet
[ 5.401187] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 5.401731] ACPI: Lid Switch [LID]
[ 5.547764] Linux agpgart interface v0.103
[ 5.552684] agpgart-intel 0000:00:00.0: Intel 915GM Chipset
[ 5.552747] agpgart-intel 0000:00:00.0: detected gtt size: 262144K total, 262144K mappable
[ 5.553017] agpgart-intel 0000:00:00.0: detected 8192K stolen memory
[ 5.553242] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xc0000000
[ 5.631371] [drm] Initialized drm 1.1.0 20060810
[ 5.688002] ACPI: Video Device [VID] (multi-head: yes rom: no post: no)
[ 5.688080] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A03:00/LNXVIDEO:00/input/input3
[ 5.688134] [Firmware Bug]: Duplicate ACPI video bus devices for the same VGA controller, please try module parameter "video.allow_duplicates=1"if the current driver doesn't work.
[ 5.690239] ACPI: Battery Slot [BAT0] (battery present)
[ 5.690376] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 5.690384] ACPI: Power Button [PBTN]
[ 5.690609] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5
[ 5.690615] ACPI: Sleep Button [SBTN]
[ 5.696499] ACPI: AC Adapter [AC] (on-line)
[ 5.702640] thermal LNXTHERM:00: registered as thermal_zone0
[ 5.702646] ACPI: Thermal Zone [THM] (26 C)
[ 5.865078] pci 0000:00:1e.0: setting latency timer to 64
[ 5.865091] yenta_cardbus 0000:02:01.0: enabling device (0000 -> 0003)
[ 5.865239] yenta_cardbus 0000:02:01.0: CardBus bridge found [1028:01a4]
[ 5.865265] yenta_cardbus 0000:02:01.0: Using CSCINT to route CSC interrupts to PCI
[ 5.865268] yenta_cardbus 0000:02:01.0: Routing CardBus interrupts to PCI
[ 5.865275] yenta_cardbus 0000:02:01.0: TI: mfunc 0x00001002, devctl 0x64
[ 5.873287] e100: Intel(R) PRO/100 Network Driver, 3.5.24-k2-NAPI
[ 5.873294] e100: Copyright(c) 1999-2006 Intel Corporation
[ 5.974184] intel_rng: FWH not detected
[ 6.027516] i801_smbus 0000:00:1f.3: SMBus using PCI Interrupt
[ 6.094160] yenta_cardbus 0000:02:01.0: ISA IRQ mask 0x0cf8, PCI irq 16
[ 6.094169] yenta_cardbus 0000:02:01.0: Socket status: 30000007
[ 6.094175] pci_bus 0000:02: Raising subordinate bus# of parent bus (#02) from #03 to #06
[ 6.094188] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [io 0xd000-0xdfff]
[ 6.094193] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xd000-0xdfff:
[ 6.095484] excluding 0xd000-0xd0ff 0xd400-0xd4ff 0xdf40-0xdf7f
[ 6.108339] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0xdfd00000-0xdfdfffff]
[ 6.108347] pcmcia_socket pcmcia_socket0: cs: memory probe 0xdfd00000-0xdfdfffff:
[ 6.108357] excluding 0xdfdf0000-0xdfdfffff
[ 6.108363] yenta_cardbus 0000:02:01.0: pcmcia: parent PCI bridge window: [mem 0x20000000-0x23ffffff pref]
[ 6.108367] pcmcia_socket pcmcia_socket0: cs: memory probe 0x20000000-0x23ffffff:
[ 6.108378] excluding 0x20000000-0x23ffffff
[ 6.156766] [drm] Memory usable by graphics device = 256M
[ 6.156776] checking generic (c0000000 300000) vs hw (c0000000 10000000)
[ 6.156779] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 6.156809] Console: switching to colour dummy device 80x25
[ 6.156943] i915 0000:00:02.0: setting latency timer to 64
[ 6.157242] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 6.157245] [drm] Driver supports precise vblank timestamp query.
[ 6.157329] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 6.196410] e100 0000:02:08.0 eth0: addr 0xdfdfd000, irq 20, MAC addr 00:14:22:c2:f4:70
[ 6.221350] input: PC Speaker as /devices/platform/pcspkr/input/input6
[ 6.228810] dcdbas dcdbas: Dell Systems Management Base Driver (version 5.6.0-3.2)
[ 6.236782] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02
[ 6.236794] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 6.236802] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 6.236810] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 6.236817] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 6.245149] [drm] initialized overlay support
[ 6.275242] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 6.403748] microcode: CPU0 sig=0x6d8, pf=0x20, revision=0x20
[ 6.812372] gpio_ich: ACPI BAR is busy, GPI 0 - 15 unavailable
[ 6.812428] gpio_ich: GPIO from 190 to 239 on gpio_ich
[ 6.816755] microcode: Microcode Update Driver: v2.00 <[email protected]>, Peter Oruba
[ 6.916862] systemd-udevd[123]: renamed network interface eth0 to enp2s8
[ 6.996643] psmouse serio1: synaptics: Touchpad model: 1, fw: 6.2, id: 0x8fa0b1, caps: 0xa04713/0x200000/0x0, board id: 3655, fw id: 35884
[ 7.006089] fbcon: inteldrmfb (fb0) is primary device
[ 7.033421] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x100-0x3af:
[ 7.034777] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input7
[ 7.036467] excluding 0x170-0x177 0x1f0-0x1f7 0x370-0x377
[ 7.036511] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x3e0-0x4ff:
[ 7.037330] excluding 0x3f0-0x3f7 0x4d0-0x4d7
[ 7.037357] pcmcia_socket pcmcia_socket0: cs: IO port probe 0x820-0x8ff:
[ 7.037954] clean.
[ 7.037978] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xc00-0xcf7:
[ 7.038607] clean.
[ 7.038632] pcmcia_socket pcmcia_socket0: cs: memory probe 0x0c0000-0x0fffff:
[ 7.038648] excluding 0xc0000-0xc7fff 0xcc000-0xcffff 0xf0000-0xfffff
[ 7.038669] pcmcia_socket pcmcia_socket0: cs: memory probe 0xa0000000-0xa0ffffff:
[ 7.038683] clean.
[ 7.038703] pcmcia_socket pcmcia_socket0: cs: memory probe 0x60000000-0x60ffffff:
[ 7.038716] clean.
[ 7.038737] pcmcia_socket pcmcia_socket0: cs: IO port probe 0xa00-0xaff:
[ 7.039386] clean.
[ 7.063195] iTCO_vendor_support: vendor-support=0
[ 7.064333] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.10
[ 7.064377] iTCO_wdt: Found a ICH6-M TCO device (Version=2, TCOBASE=0x1060)
[ 7.065219] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 7.182541] cfg80211: Calling CRDA to update world regulatory domain
[ 7.427229] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 7.464875] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[ 7.484115] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 7.486739] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 7.486740] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[ 7.486742] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
[ 7.553415] Console: switching to colour frame buffer device 128x48
[ 7.558741] i915 0000:00:02.0: fb0: inteldrmfb frame buffer device
[ 7.558745] i915 0000:00:02.0: registered panic notifier
[ 7.558763] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 7.559077] snd_intel8x0m 0000:00:1e.3: setting latency timer to 64
[ 7.666733] MC'97 1 converters and GPIO not ready (0xff00)
[ 7.667845] snd_intel8x0 0000:00:1e.2: setting latency timer to 64
[ 8.215265] Adding 2097148k swap on /dev/sda3. Priority:-1 extents:1 across:2097148k FS
[ 8.490136] intel8x0_measure_ac97_clock: measured 51939 usecs (2503 samples)
[ 8.490144] intel8x0: clocking to 48000
[ 8.857914] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: data=ordered
[ 8.929489] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: data=ordered
[ 9.174030] systemd-journald[91]: Received request to flush runtime journal from PID 1
[ 10.867701] IPv6: ADDRCONF(NETDEV_UP): enp2s8: link is not ready
[ 10.870173] e100 0000:02:08.0 enp2s8: NIC Link is Up 100 Mbps Full Duplex
[ 10.870468] IPv6: ADDRCONF(NETDEV_CHANGE): enp2s8: link becomes ready
[ 1442.063296] ssb: Found chip with id 0x4318, rev 0x02 and package 0x02
[ 1442.063313] ssb: Core 0 found: ChipCommon (cc 0x800, rev 0x0D, vendor 0x4243)
[ 1442.063321] ssb: Core 1 found: IEEE 802.11 (cc 0x812, rev 0x09, vendor 0x4243)
[ 1442.063329] ssb: Core 2 found: PCI (cc 0x804, rev 0x0C, vendor 0x4243)
[ 1442.063337] ssb: Core 3 found: PCMCIA (cc 0x80D, rev 0x07, vendor 0x4243)
[ 1442.102223] ssb: Sonics Silicon Backplane found on PCI device 0000:02:03.0
[ 1442.129092] cfg80211: Calling CRDA to update world regulatory domain
[ 1442.175516] b43: unknown parameter 'ssb' ignored
[ 1442.175999] b43-phy0: Broadcom 4318 WLAN found (core revision 9)
[ 1442.209933] b43-phy0: Found PHY: Analog 3, Type 2 (G), Revision 7
[ 1442.230067] Broadcom 43xx driver loaded [ Features: PMNLS ]
[ 1442.237090] b43-phy0 ERROR: Firmware file "b43/ucode5.fw" not found
[ 1442.237099] b43-phy0 ERROR: Firmware file "b43-open/ucode5.fw" not found
[ 1442.237103] b43-phy0 ERROR: You must go to http://wireless.kernel.org/en/users/Drivers/b43#devicefirmware and download the correct firmware for this driver version. Please carefully read all instructions on this website.
Last edited by w201 (2013-12-31 22:13:01)Got it running, was missing "b43-firmware" from the AUR, which is different than b43-fwcutter. Instructions kind of unclear there, but hey it's running.
-
Broadband/internet and wireless connection problem...
Towards the end of 2101 I received an email informing me that BT would be upgrading my local line and I could expect a much improved service. Whether this 'upgrade' has been the cause of my problems or is merely coincidental I cannot say. Prior to my experience since this time I could count lost broadband in hours per year (I never had internet or wireless connection problems).
Since the end of 2010 I now regularly lose my broadband completely every six to eight weeks. 'Home Hub cannot connect to broadband.' There is a worsening loss of speed? over a period of two to four days at the end of which I need to phone BT three/four/five, etc. times until they manage to locate the problem and fix it. It is always some problem they find on the line or with their equipment.
I always mention that this is an ongoing problem. Never do they take any action to escalate the issue.
This week things have become considerably worse.
I have started to lose my internet connection now. 'Safari cannot connect to the internet'.
There are now two issues which arise concurrently.
I phoned BT, finally the operative in India (through a very poor BT wireless phone connection) changed the channel of my router for me. He mentioned something about changing the address and password. This seriously exacerbated the situation. My password is not recognised now when I am asked to reconnect by selecting a network.
The next occasion on which I lost my INTERNET connection and tried to reconnect I got the message 'Airport has the self-assigned IP address (...........) and is unable to connect to the internet.
I phoned BT to report this and was told that this indicated an adapter problem and the problem was now out of BT's hands. I Should contact Apple.
I did so. Apple said I should contact BT to change channels. I explained this had caused the problem and they were now refusing to assist me. Apple tried everything that they could think of to resolve the issue (despite not being required to do so). Eventually the only suggestion they could make as BT had refused to help was to reinstall my operating system. Extremely drastic. But I can now connect wirelessly again.
Service is still intermittent requiring constant restarts to regain connections.
BT's response to a formal complaint was more of the usual banal questions, the usual tests, the usual promises of 'something would be done'.
Their systems are not set up to make any sort of accurate diagnosis of customers' issues. They seem to have a set number of 'fixes' into which they try to fit all problems - one would assume simply to save costs - their cost saving exercises are now costing me money.
That's all for starters.
Any suggestions?
Solved!
Go to Solution.fredderf99 wrote:
I have a similar problem, since BT "upgraded my broardband" my home hub looses internet connection at least twice a day and I have to power reset it. the broadband shows as connected but the internet connection is lost, if I try reconnecting it fails and only a power resetr will work. I have a temp solution by fitting a time switch to the mains adaptor and reseting it at 0200 each day. but before the upgrade the home hub had worked for years and no problems. i have also replaced the origonal home hub 1 with a home hub 2 to see if that improves the situation.
welcome to the forum
This subject has been marked as solved by the originator and you will get more response if you start your own subject rather than continue here.
if you start your own subject just cut and paste your post and then in order to help please can you post the adsl stats from your router may need to 'show detail' to get all stats (if hub enter 192.168.1.254 in your browser and navigate to adsl or use a-z, if netgear enter 192.168.0.1) and run btspeedtester (MAC users may have problems) http://speedtester.bt.com and post the results .
are you connected directly to the NTE5 master or test socket or to somewhere else? Do you have any phone extension sockets in your home?
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
Someone may then be able to offer help/assistance/suggestions to your problem
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’. -
Hi
I am experiencing wireless connection problem on 4s after ios 8.1 upgrade. The wireless icon appears showing that it's connected but webpages do not load. I have checked my internet connection with other devices and seems to be alright. what to do?
I have tried reseting the network settings and forgetting my wireless connection and re-connecting to it. I even backed up my phone on itunes and restored it, factory reseted it. Nothing seems to work.
Also after my upgrade to ios 8.1 my personal hotspot option under cellular data has disappeared.
Would you please help me out? I would really appreciate it.Hi..
Restart your router then restart the iPhone to test.
If that doesn't help, try this support article > iOS: Troubleshooting Wi-Fi networks and connections -
Wireless connectivity problems using IOS 6.0.2?
After installing IOS 6.0.2 on my iPhone 5 I can no longer connect to known wireless sites. I've been through troubleshooting with both Apple and my ISP and no luck. I'm thinking there's wireless connectivity problems with this latest update (my iPad 3 is still running 6.0.1 and is fine on my wireless network). Are others having this issue as well?
I am not guaranteeing this fix , but it worked for me , so far. I have an iphone 5 and it had ios 6.0.1 . Worked fine. Upgraded to 6.0.2 and it wouldn't connect with home router most of the time. My son in law an IT guy for the Government came up with a solution. The problem seemed most likely with routers that are bought and not configured and retain the original factory settings. Therefore my phone considers my home network a generic one and I have to manually connect to it. To distinguish the network we did the following.
1) went to settings on my iphone
2) choose "my home network" by pushing the arrow on the right
3) This brought up the network info page. (it says "forget this network " at the top)
4)DHCP will probably be highlighted.
5) touch "static"
6) This will bring up the manual settings
7) We entered the following.
For Ip Address 192.168.1.15
Subnet Mask 255.255.255.0
Router 192.168.1.1
DNS 4.2.2.1,4.2.2.2,8.8.8.8
Leave the HTTP Proxy to off
This will assign a static Ip address not a dynamic one and should work.
If it doesn't , go back to step 3 and select DHCP and return to the dynamic state . -
Fix for Airport Wireless Connection Problem stating Self-Assigned IP and not wanting to connect in Lion OSX.
Bought my girlfriend the newest Macbook Pro 13" and began experiencing problems with my wifi the moment we got home. Her Macbook would not connect to our home Wi-Fi while my old Macbook Late 2008 running Snow Leopard connected without a problem. Airport would say that it had a Self-Assigned IP address (168.x.x.x). Did not realize it was a Lion problem until after using her Macbook Pro and becoming jealous of the new OSX, I upgraded. Soon after I was unable to go online. Luckily I had my iPad 2 and I began to scoure the net for help. Ran into allot of suggestions but it was not until I tried the following all together was I able to share the good new, from my Macbook. Hope this works:
First go to Preferences > Network and click on the cog next to the + and - on the sidebar and click Set Service Order
- Move Wi-Fi to the top and click ok.
- Set location to Automatic
- Click Apply
- Click Advanced
- Click the "-" on the selected Wi-Fi router you wish to connect to
- Click Apply
- Click Lock to Prevent Further Changes
Go to your Mac's harddrive, (Macintosh)
- Go to Library > Preferences > SystemConfiguration >
- Delete "com.apple.airport.preferences.plist" file
Turn off your computer
- push and hold Option+Command+R+P
- turn on computer
- when the grey screen turns on you will hear the OS X "ON" sound (for lack of a proper term) and it will momentarily restart.
- you will once again hear the "ON" sound, let go of all keys.
- this resets your PRAM
Go to Preferences > Network > Advanced > + sign
- click Choose a Network
- Select your network and enter password
Viola!!! I tried this on my Macbook Late 2008 and my girlfriends new Macbook Pro 2010No you are clearly mistaken. The Self-Assigned IP address problem exists on many Macbook Pro models, including the current model, which I mentioned as being the original computer with the problem. While my 2008 Macbook is older it was working perfectly on Snow Leopard and didn't suffer issues until switching to Lion. So clearly the problem exists on the operating system and not so much the hardware.
I called Apple Support and they had no fix for the problem and told me that this would hopefully be addressed in a subsequent update. It wasn't until I came accross the answer after trying many different methods that I got both of the Macbooks to connect to my router. Otherwise I wouldn't or could not have been surfing the internet for the last 4 months.
Cheers. -
Macbook Pro Wireless Connection Problems
I bought my 13 inch macbook pro 1 week ago and I've had wireless connection problems from day 2 (I think after the updates).
Problems include:
- Safari cannot connect to the internet for 5~10 minutes after I turn it on, whether it be from sleep mode or completely off or restart (the fastest connection I got after turning it on was about 40 seconds)
- Loading takes ridiculously long and eventually Safari cannot find the server
- Airport signal (on the top right hand corner) is always full when it is not working
- Sometimes internet works but it is ridiculously slow
However, when the wireless connection stabilizes, Airport Signal is 2~3 bars full and internet works SOOO well and I love it so much when it does. But the problem is that it stabilizes like 30 minutes to never after I turn it on and it makes me so mad I want to explode this piece of crap in the microwave.
So I've called apple support, and they made me try four things:
1. Reset modem, router, and computer
2. Delete caches, reset Safari
3. Putting Airport first on the Service Order and resetting DHCP Lease
4. Connecting with Ethernet Cable then resetting the computer
None of these worked, and I'm suspecting that the cause of the problem is the hardware (not the aluminum body that's just bs) because my router and modem are working fine (my other samsung laptop is working perfectly). I don't think the problem lies in my network settings either because I did exactly what the Apple technicians told me to do. So after Appleguy made me try all 4 of those diagnostics, he told me to contact my router company NETGEAR because he thinks nothing is wrong with the mac hardware, so I did. The NETGEAR lady told me if one laptop is working and another isn't, there is nothing wrong with the router. So if nothing is wrong with my hardware, software, router, modem, ISP... Why do I have wireless issues????!?!?!?!?!?!?!?!?!?!
I'm going to return this <edited by host> or get another one with my warrantySame thing here.
I've got a Macbook Pro 15" bought 6 weeks ago, airport express bought about a year ago. All updated with latest software/firmware, etc. Problems include:
-Sometimes when i pull down the network list, my network isn't even there, yet i'm still connected to it. My airport is appx 10 feet away in an open area.
-usually after opening safari or firefox for the first time upon sleep, restart, or just opening the program after i had quit it, it is miserably slow. it takes about 2 minutes for pages like msn.com to load. finally when they do, its faster than you can imagine. that lasts for about a minute. then its slow again.
-when logged into ichat and i send messages, i would sometimes get a "connection timeout" message. my buddy would end up getting the message about 5 minutes later.
My iphone and dell laptop work fine. i haven't tried running parallels, but if bootcamp works, so should prlls.
I've reset the modem about 20 times. i've reset the airport about 20 times. i even re-installed my OS on the mac and nothing has done it.
Weird thing is that i've had my mac for 6 weeks, and this problem surfaced only 3 days ago.
Clearly its not an issue of any of our ISP's. Due to the fact that this only started for me 3 dyas ago, i'm hopeful that its only a software problem and not something else. Hopefully apple will a) ADMIT THEY HAVE A PROBLEM HERE and b) FIX IT. -
A Fix for Wireless Connection Problems
I’ve been struggling with connection problems for a week. Thankfully, I found a fix. Your mileage may vary, but this may be your answer:
Fix for Wireless Connection Problems on MacBook ProYeah BR, please tell me what your cure is. I have the same setup as you, Vista with the same wireless card you have. Cannot stay connected to the internet. Have spent hours on the phone with tech support and they can't fix it. I hate this f....ing computer, will never buy another one. Please let me know what you did. Once I get it running right I'm selling it and will buy a cheap Dell, never have any problems with them. I have keyboard problems, capital letter problems, connection problems, and download can take 1 to 2 days. Pure BS!!!!!!!!!!!!!!!!!
-
Wireless Connection Problems for Home Hub 3 and Vi...
We have upgraded from BT Home Hub 2 to version 3 and had a BT man (engineer) visit to set it up. He did so with no problems on our PC (wired, runnning XP) and installed all relevant software on the PC and this is connected which so far has been fast (enough - as expected) and reliable. Once the 'main' computer in the house was connected we then tried to connect other things to the internet using this BT Hub 3.
However when attempting to connect our family laptop (running Vista) we hit trouble. Initially I tried to use the icon in the tray (bottom right of the screen) by clicking on connect to a network, then selecting our hub, then inputting the wireless key and going through the menus correctly. It would only connect 'locally' and not recognise the hub. It says identifying then says unidentified (public network BT Hub 3) and only 'local' access which I then change to private network. With my preivious internet I was able to set it up as Home network - now I can only choose between public or private BUT NOT Home, Work or Public.
So I then tried the BT disc that comes with the hub into the laptop. I go through the menus - it asks is the broadband light steady blue? Yes. Click next to continue wireless set up. So I press continue. It then asks for the wireless network/SSID BTHub3- numbers and letters and the wireless key. So I put that in correctly (double checking) and click next. It then says Connecting to your Hub which then gets ticked but then the checking wireless key doesn't tick - it crosses, and says failed. It asks me to check I typed the numbers and letters correctly (I am sure of that) and It goes to Manuel set up. Where I select my hub and again type in the wireless key and click next. But the same thing happens - connecting to your hub gets ticked but checking wireless key fails.
I then get a message that says i should do a wired set up, which I can do and works but on the laptop wired solutions is just not satisfactory - laptops need wireless connectivity. Is this a problem with my laptop, Vista or the hub/modem or a combination.
I also have been able to connect other things to the internet such as a netbook (running Windows 7) and a games console. Please comment if anthing needs explaining or more detail. Your help will be much appreciated. Thank you in advance.
Solved!
Go to Solution.John46: I uninstalled the Hub programmes you said to. I then tried to connect to a network (wirelessly - accessed either by going to Start - Connect to or from the icon in the tray (bottom right). I selected my hub and clicked connect. It does its thing and says 'successfully connected to...' I close that and go onto Network and Sharing Center and it shows its trying to identify the network and wait a few seconds it then shows 'unidentified network (public network)...' and that I have only got local access and so cannot surf the web.
As I mentioned in my earlier post:
With my previous Internet I was able to set it up as Home network - now I can only choose between public or private BUT not got the choice between Home, Work or Public.
Hope I've explained myself. -
HP OfficeJet Pro 8600 Wireless Connection Problems
Started having problems scanning. Then problems printing from my desktop - Unable to find printer. Uninstalled / Re-installed HP Software / Drivers; Desktop is still unable to find the printer - During setup: The IP Address is either incorrect or it is from a different wireless network that has the same name as your network.
I have verified the following:
The IP Address of my Desktop and Printer are the same except the last number
The HP Scan and Print doctor sees the printer and indicates all is functioning normally
I can see the printer via web browser and the printer's IP address on my desktop
I can print to the printer via wireless from my iPad and laptop
The only issue is configuring the printer on my desktop and actually printing from it.
Thanks in advance for your assistance.
This question was solved.
View Solution.Hello NorseGuy ,
Please let me take a moment to say "Welcome" to the HP Forums.
I hope you enjoy your experience!
I see that you are having an issue with staying connected on the wireless network.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
I would also suggest going through the following document for troubleshooting the Printer Does Not Maintain Wireless Connection
Please feel free to write me back if you have any other questions or concerns.
Thank you.
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
OfficeJet wireless connection problems
I am hoping someone can help me as I have exhausted every option I can find.
I bought an OfficeJet 6830 All in one printer. I have several devices that need access to it.
My desktop Dell uses a USB cable to connect to the printer and it works well.
I have three laptops that I would like to connect wirelessly to the printer, but I can't get any of them to identify the printer.
I can install the printer using a USB cable, so I know the software and drivers will install.
When I set up the printer, I set up the wireless connection. The printer attaches to my Actiontec router (FiOS) and I can log into the router to see the device. It shows it as active. The blue light on the front panel of the printer is on and solid. I can check the settings in the printer and it shows the correct SSID and correct format for an IP address. I have set it up as a static address in the router and manually set it in the printer.
The problem occurs when I try to install the software on the laptops. I get to the point wher I specify the connection as Wireless and the software attempts to find the printer, but it never finds it. I have tried manually typing in the address for the printer, but this does not help with discovery.
I even tried installing the drivers and software using the USB cable which was successful. I then tried to convert the connection from USB to Wireless, but I don't think the software was waiting long enough for the printer to establish an IP address, because it would show a panel that stated the printer was connected to the network but waiting on an IP address. I would select Wait for the printer to establish an IP address, but even after the printer's blue light stopped flashing and stayed solid, the software still cannot find the printer.
Anyone have further suggestions I might try to get it connected to my laptop?
I would hate to ship back the printer, but if I can't print wirelessly, then I need to find a better printer
Thanks.
Update:
I found the Actiontec article and reread it twice before noticing that AES encryption was needed rather than the TKIP/AES I was using. I changed it to AES and I was able to install the software and get the printer to communicate with the laptop over the wireless connection.
Unfortunately, it didn't last very long as it is again refusing to communicate between the laptop and printer.
Does anyone have a clue what's going wrong?
ThanksHi blbower,
Well, by the sounds of things we may have our work cut out for us.
Let's start off right frm square one.
First off, please make sure that you have the printer power cable connected directly to a wall outlet and not a power bar/strip. Here is a document that uses a LaserJet printer as an example but it is meant for HP products in general. Please click on the following link that explains the Issues when Connected to an Uninterruptible Power Supply/Power Strip/Surge Protector.
Please remove the usb cable from the Windows XP computer and from the printer and leave it disconnected until further notice.
If you have already attempted to install the software and drivers on the Windows 7 computers, please click on the following link for Uninstalling the Printer Software. I suggest you do this for each computer so that we are starting off clean.
Once the uninstall is complete, please restart each computer so that the changes take affect.
If you have any firewalls or anti virus protection running, disable it on each and every computer.
This next link is the HP Officejet Pro 6830 e-All-in-One Printer series Full Feature Software and Drivers .Please save this file on each computer to the Desktop so that it creates its own icon.
Double click the new icon and follow the instructions for the installation.
These steps will need to be done on each system.
On the printers main display, we are going to need to reset the Network Defaults so that it starts off fresh.
On the front touch panel, scroll to the right to the Setup option, go to Network set up and then to Restore Network Defaults. Press YES to make the changes.
Once it has been reset, go to the Network Setup option once again and this time select Wireless Set up Wizard. Once this is complete you will then see an IP address that you can add to each computer on the portion where it asks for a connection option in the installation.
If the troubleshooting does not help resolve your issue, I would then suggest calling HP's Technical Support to see about further options for you. If you are calling within North America, the number is 1-800-474-6836 and for all other regions, click here: click here.
Thanks once again for your time.
Cheers,
Click the “Kudos Thumbs Up" at the bottom of this post to say “Thanks” for helping!
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
W a t e r b o y 71
I work on behalf of HP -
Lenovo IdeaPad V460 Wireless connection problem
Hi, this is my first post and one of my most frustrating problems, l have brought the laptop for nearly a year now and l notice a problem with my wireless connections, it was either windows resetting the wireless card or there are a problem with the card it self, l think, the problem is solved once l restart the computer but never lasted, can u tell me whats possibly wrong with step by step solution on how to solve this, thanks in advance
hey andrew5s,
try uninstalling the wireless driver for your unit, let windows install its generic driver.
test your wireless with the generic driver.
later go to : http://consumersupport.lenovo.com/us/en/DriversDownloads/drivers_list.aspx?CategoryID=287385
and install the wifi driver that is available here. test your connection again
WW Social Media
Important Note: If you need help, post your question in the forum, and include your system type, model number and OS. Do not post your serial number.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
Follow @LenovoForums on Twitter!
Have you checked out the Community Knowledgebase yet?!
How to send a private message? --> Check out this article. -
Weird Laptop Wireless Connection Problem
I have an HP DV6 6C16NR i7-2670QM laptop and am having a very annoying wireless internet connection problem.
I'll connect fine to my home network, but if I restart and try to connect again, it won't. The only way to fix it, is if I change the channel on my router. And then it'll repeat itself.
Any idea what's going on here? Must be some sort of proxy/memory type problem?
Using Netgear WNDR3700 with only 2.4ghz enabled. Lots of other wireless devices in our home connects without any issues at all. ie. cellphones (4), wireless alarm clock, IP cams (2) and a netbook.
Is this a hardware issue that I should warranty?Hello ThaiM69,
I'm not sure if you have Windows 7 or 8. Please take a look at this page and let me know if the troubleshooting steps help to resolve your connection issue.
Good luck!
↙-----------How do I give Kudos?| How do I mark a post as Solved? ----------------↓ -
2Wire wireless connection problem
Hi everyone,
I've just installed an airport card into my IBook G3 running OSX 10.2.8. I'm connected to a 2WIRE wireless 2701HG-B wireless modem. We have G4 laptop that's connecting with no problems.
The IBook G3 is able to establish a connection to the wireless modem but is experiencing the following problems:
*In Entourage, I can receive emails but not send them. Error message is Mail Error. Server busy. Try again later. Error 5421. Could this be a problem with the SMTP override default number? Mine is currently set at 587.
*In Safari, I can access some websites but not others (cnn.com, google.com - yes; mapquest, yahoo.com, gmail.com -- no).
*In Firefox and Explorer, I cannot connect to webpages at all. It tries for 60 secs and then says it couldn't connect.
I have connected with this Airport card to a NETGEAR network at my office with no problems. On the 2WIRE network, the airport connection icon shows full bars.
I would appreciate any help that you might offer. I would love to make this G3 work wirelessly at home.
Thanks in advance.
--HeatherBDAqa wrote:
Type or paste this into your Browser's url bar...
http://72.14.207.99/
Let me know the results.
and you replied:
Wait! I just tried it again. Cleared my cache, turned on my wireless connection, and typed this in the browser. Took me to Google.
So he has established that you have a good connection, but DNS isn't working. DNS is the service which allows you to type in a meaningful name like www.google.com instead of 72.14.207.99. How this works is that your machine has a process called a resolver (lookupd for OSX) which queries servers out in the world. BDAqua gave you the addresses of two servers. If you entered them in System Preferences they should stay there. Did you remember to click the Apply button?
I really think BDAqua has solved this. We can look further, but it seems to clearly be a DNS problem. -
Old MSI all-in-one wireless connectivity problem
Hi folks,
Hope someone can help - if only by sending me somewhere else!
I have a reasonably old MSI all-in-one model MS-6633 (NetON AP 1900) which I bought new perhaps 6 or 7 years ago.
I'm running it wirelessly, connected via a TP-Link Powerline Ethernet Adaptor. My main PC is wired to a TalkTalk modem.
For some reason it's recently been disconnecting itself from the internet, although, by going to 'connect to' I can usually fairly quickly regain the internet connection.
I've spoken to TalkTalk and their tech guy ran 20 minutes of tests - at the end of which he said that there was nothing wrong with my internet connection or any other equipment leading to my PC......so the problem must be in the MSI unit.
Mind you, I don't entirely trust him - would he tell me if I was getting brief disconnections caused by a fault at their end?
He gave me the MSI number (0870 8200 009) - which always comes up with a "we're busy" automated answer - and I don't know what else to do.
Can anyone help; tell me what I need to do, or redirect me to somewhere useful.
Thank youHi there - glad someone cares!!!
Yep - definitely in the UK - whether I like it or not!
Right - O/S is Windows XP Home edition
Automated updates are always turned on....
Connection to the phone line is by router
I considered removing and re-installing the drivers, but thought I'd ask around first.....
Actually, yesterday I did a clean-up which hadn't been done for ages.
The computer concerned is my spare/back-up, which my wife uses at present and I do tend to forget to do any housekeeping on it though, but ever since I worked it over, (cookies, temp files, etc removed) there's been no problem with the internet connection.
I'm not taking the kudos - I just thought I'd do it and just perhaps, it's solved the problem.
However, if anyone knows of a better way to ensure that the computer remains connected, I'd love to hear from you.
Maybe you are looking for
-
How to change & see the PO Status (Purchase Order Status) ?
Hi Everybody, I have to change the PO Status. For this I am using the Function Module 'BBP_PD_PO_STATUS_CHANGE'. But it is not changing the PO Status. How/Where to see the PO Status? Please help me out asap. Thanks & Regrds, Nagaraju Maddi Message wa
-
1.5 How to globally set the System Cache location
FROM ANOTHER USER ON ANOTHER BOARD: This one did not get answered completely. ************************* Question: Hello, I want to deploy JWS on a client PC with Microsoft XP OS. This client have multiple users. JWS put a file deployment.properties i
-
How do I install osx lion server in vmware fusion (app store version)
i cannot seem to find a way to get a .dmg to download to use / mount / whatever mac mini running osx lion
-
BITMAP indexes ignored with large IN(...)
I have a fact table with 20 million records joined to a few dimension tables using 10g BITMAP INDEXes but if I add more than two or three items to my SELECT query the optimizer does not choose to use the bitmaps. For example, the first query SELECT p
-
Counter increases and decreases by 1, records count nonnegative integer and tests whether the current count value is zero. No method allows the value of counter to become negative. Can anyone assist?public class Counter private int count; // definiti