Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005

Hi All,
We are trying to create a replication between Sql server 7.0 data to SQL server 2005 data . We tried to create a local subscription in Sql server ,when tried to connect to publisher running in Sql server 7.0 it is showing an error message
like "This Sql server vresion(7.0) is not supported" .
Could any one please help us with this issue ?
Thanks
Sandy

Hi CRM_Learner,
SQL Server version 7.0 Service Pack 4 (SP4) is the earliest version that can participate in a replication topology with SQL Server 2005. We need to verify the version of SQL Server. If you configure transactional replication with updating subscribers,
for a SQL Server 7.0 Publisher, only SQL Server 7.0 Subscribers are supported. SQL Server 7.0, 2000 was out of support in the SQL Server Forums. I suggest you install SQL Server 2005 or later version to configure the SQL Server replication.
For more information, there is a detail about using multiple Versions of SQL Server in a replication topology.
http://technet.microsoft.com/en-us/library/ms143241(v=sql.90).aspx
Regards,
Sofiya Li
If you have any feedback on our support, please click here.
Sofiya Li
TechNet Community Support

Similar Messages

One way replication from MS sql server to Oracle 10g

Hi,
We are using Sql server 2005 windows 2003 32 bit and Oracle 10g 10.2.0.3 on linux 64 bit
Is it possible to replcate table data on real time from sql server (2005 32 bit or sql server 2000 32 bit)to oracle 10g running on linux 64 bit?
If yes then what are the steps.
It will be one way replication from sql server to oracle.
Which option is best sql server dts or Oracle Stream replication to replicate table data?
Regards,

If you want to push data from SqlServer, then ODBC, Linked tables, DTS etc.
If you want to pull data from Oracle, then Heterogenous Services / Gateway.

Transactional replication from SQL Server 2014 to Sybase 12.5

Hi All,
Is it possible to set up replication between SQL Server 2014 and Sybase 12.5 in which SQL server would be the publisher and Sybase as subscriber.
Regards..
aa

Hi Ashif,
According to this
blog, it is possible to set up transactional replication from SQL Server to Sybase.
To achieve this, you could set up transactional replication via the Sybase OLE DB driver after you set up Sybase as a
linked Server.
For how to set up transactional replication, please refer to the article:
http://sqlserverscribbles.com/2013/06/26/how-to-create-transactional-replication-in-sql-server/
Regards,
Michelle Li

Transfer data from two oracle version to one sql server 2005

Hi,
I have two database servers on different machines. They are
1) Oracle 8.1.7.4
2) Oracle 7.3.1.4
I have to create agents which can transfer tables from these two databases to one machine having sql server 2005 database.
Please tell me what are the options. What drivers i need to install on machine having sql server 2005 so that i can transfer data from both oracle versions.
Thanks
Rajneesh.

Your Oracle databases are so old you might want to look around and see if you can find dinosaur bones near by.
Given the differences in data types between Oracle and SQL Server I'd suggest you start off by dumping the data into delimited ASCII files and then loading it using whichever SQL Server tool you wish.

Transfer data from 2 oracle version to sql server 2005

Hi,
I have two database servers on different machines. They are
1) Oracle 8.1.7.4
2) Oracle 7.3.1.4
I have to create agents which can transfer tables from these two databases to one machine having sql server 2005 database.
Please tell me what are the options. What drivers i need to install on machine having sql server 2005 so that i can transfer data from both oracle versions.
Thanks
Rajneesh.

You could create a linked server. Install the Oracle client on the server with SQL Server 2005, setup the TNS to your Oracle databases, create the linked server and then grab the data that way. There are migration tools as well but if the database is small in size I found linked servers to work and give me better control over the migration. This assumes that the database is not very large. If it is really large a migration tool might be a better option.

Replication Configuration issue after migrating from SQL Server 2005 to SQL Server 2008 R2

Hi All,
This weekend we have migrated one of our Core system from SQL Server 2005 SP3 to SQL Server 2008 R2 SP2. Migration went successful. However when we are trying to Configure transaction replication we are getting below Error:
Msg 21854, Level 16, State 1, Procedure sp_MSrepl_addarticle, Line 573
Could not add new article to publication 'abc' because of active schema change activities or a snapshot is being generated.
Background:
Database compability Changed from 90 to 100.
A quick Help would be appreciated.
Best Regards - Viral
Thanks - Viral

Is a snapshot being generated? the message seems to indicate one is.
looking for a book on SQL Server 2008 Administration?
http://www.amazon.com/Microsoft-Server-2008-Management-Administration/dp/067233044X looking for a book on SQL Server 2008 Full-Text Search?
http://www.amazon.com/Pro-Full-Text-Search-Server-2008/dp/1430215941

Replication from SQL Anywhere to Microsoft SQL Server

SQL Anywhere Community,
I have a customer who wants to replicated their Replication from SQL Anywhere to Microsoft SQL Server Data Warehouse. Are there any whitepapers on this or qualified consultants that could deliver?
Regards,
Joseph Shaffner | Vice President, SAP Solutions | Bradmark Technologies, Inc.
T: 1-301-535-2537 | [email protected]

Hi Joseph,
I can help with the "whitepaper" aspect of this question. All of the information for synchronizing with MobiLink can be found in the official SQL Anywhere documentation: http://dcx.sap.com/
We have tutorials for SQL Anywhere, Adaptive Server Enterprise, and Oracle available in the documentation. However, the tutorials can be easily adapted to work with Microsoft SQL Server.
I can also provide some further technical information about synchronizing to Microsoft SQL Server:
The general tutorial for working with MobiLink in Sybase Central and with a MobiLink Synchronization Model is here:
http://dcx.sap.com/index.html#sa160/en/mlstart/sqlatut.html
Initially, you may want to follow it "as-is" (which uses a SQL Anywhere consolidated database) in order to get a better understanding of the MobiLink product. You can then move on to using a Microsoft SQL Server consolidated database afterwards.
Changing the tutorial to work with a different consolidated database is mostly related to creating an ODBC DSN that targets a Microsoft SQL Server instance. You would pick that DSN when defining a consolidated database in your MobiLink synchronization model. The rest of the instructions regarding creating scripts and models is the same, but using Microsoft SQL Server SQL syntax (T-SQL) instead of SQL Anywhere syntax inside the synchronization scripts.
You will need to install the MobiLink system tables for Microsoft SQL Server. The script to do this can be found at: %SQLANY16%\MobiLink\setup\syncmss.sql. If you are using Sybase Central to create a Synchronization Model though, once you connect to Microsoft SQL Server, you will be prompted to install the MobiLink system tables automatically (i.e. run the script).
There are some Microsoft SQL Server specific issues that you will want to be aware of:
http://dcx.sap.com/index.html#sa160/en/mlserver/ml-basics-mss-5159304.html
I have contacted some people internally here at SAP about consulting engagements to see if they can assist. If you are already working with an SAP Sales representative, it would probably be best to inquire with them directly and look into your available options.
Regards,
Jeff Albion
SAP Active Global Support

Restoring a SQL Server 2005 DB to a SQL Server 2014 install, is there any way to prevent it from being upgraded

Does anyone know if there is a flag I can use to prevent a SQL Server 2005 database from being upgraded to SQL 2014 when it is restored to a 2014 instance?
Don't ask why, I just need to know if this is possible or if 2005/8 DB's are required to be upgraded if they are going to run on SQL 2012/2014 instances. The documentation seems to say this is so, I just want to verify that.

First: You cannot directly restore a 2005 database to
2014. MS supports migration over 3 SQL Server version steps; means you can restore 2005 to 2008/2008R2/2012, but not to 2014. You have to do a migration step between.
Olaf I was looking for this today, because I'm working with a new customer that have SQL 2005 and I have SQL 2014. And needed to restore a backup form the production server in my test server.
When I read what you write I think, oh no!! I have to install SQL 2012 in my server. But that it's not an option for me, and I say let me try to restore the DB first in 2014 and if not work install 2012.
You can restore a 2005 database to 2014 directly, and it works.
For reference the version number in the servers 2005 (9.0.4035 SP3) and 2014 (12.0.2000 RTM)
This is not related in any way to the original question that you answered (the file format will be upgraded to the new motor, that is sure).
I put this lines because in the future there will be some people searching about if possible to restore a 2005 DB to 2014, and like me will read your lines and think it's not possible and that can make a decision to buy 2012 and not 2014 to that new server they
will migrate.
Don't forget to mark the best replies as answers!

SQL Server 2005 data pull from Oracle

Hi, I am learning how to use Oracle and I ran into this problem.
My database is running on SQL Server 2005.
I have an ODBC connection to Oracle. I also have a VB .Net script that queries the Oracle table that the data resides in.
When the job is running, and if it stalls, I do not get a timeout error. It locks down my database and no other source systems can feed data to me; these are back logged in the queue.
Is there an easier way for me to make a connection that will pull data on a consistent basis? Please help ...
Student Learner

Learning how to use Oracle does not include taking data from Oracle and putting it into SQL Server.
From your description of what is happening I agree with BluShadow. This is not an Oracle issue. This is a coding in VB .NET issue.
Posting the statements you are executing against some unknown version of Oracle would be a good starting point.

Issue with migration DB from SQL Server 2005 to Oracle 11.2 using SQL Developer Migration workbench

Hi,
We face an issue while migrating an SQL Server 2005 DB to Oracle 11.2. It fails during the process. I hope someone on the forum has seen this before and can give us some advice.
I use the latest version of SQL Developer with JRE included (3.2.20.09). The JDBC driver to connect to SQL Server 2005 is 1.2.0
Here are the steps we take in the Migration Workbench wizard:
I made an online extract of the SQL Server database.
Using the workbench in SQL Developer I created a migration repository in schema PDM_MIGRATION.
Next I start the migration, it captures the tables fine, but immediately after the start of the conversion I get a failed message without further explanations.
This is the content of the error xml:
<?xml version="1.0" encoding="windows-1252" standalone="no"?>
<log>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>SEVERE</level>
<class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
<message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@4c12ab</param>
<exception>
    <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>1078</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>316</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>1002</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>303</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>205</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>159</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
      <line>193</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
      <line>515</line>
    </frame>
    <frame>
      <class>java.util.concurrent.Executors$RunnableAdapter</class>
      <line>441</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>886</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>908</line>
    </frame>
    <frame>
      <class>java.lang.Thread</class>
      <line>662</line>
    </frame>
</exception>
</record>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>SEVERE</level>
<class>oracle.dbtools.migration.workbench.core.logging.MigrationLogUtil</class>
<message>Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
<param>oracle.dbtools.migration.convert.ConverterWorker.copyModel(ConverterWorker.java:1078)</param>
<param>oracle.dbtools.migration.convert.ConverterWorker.runConvert(ConverterWorker.java:316)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doConvert(FullMigrateTask.java:1002)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doMaskBasedActions(FullMigrateTask.java:303)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:205)</param>
<param>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask.doWork(FullMigrateTask.java:159)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTask.call(RaptorTask.java:193)</param>
<param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
<param>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask.run(RaptorTaskManager.java:515)</param>
<param>java.util.concurrent.Executors$RunnableAdapter.call(Executors.java:441)</param>
<param>java.util.concurrent.FutureTask$Sync.innerRun(FutureTask.java:303)</param>
<param>java.util.concurrent.FutureTask.run(FutureTask.java:138)</param>
<param>java.util.concurrent.ThreadPoolExecutor$Worker.runTask(ThreadPoolExecutor.java:886)</param>
<param>java.util.concurrent.ThreadPoolExecutor$Worker.run(ThreadPoolExecutor.java:908)</param>
<param>java.lang.Thread.run(Thread.java:662)</param>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@5dc1bc</param>
<exception>
    <message>oracle.dbtools.migration.convert.ConvertException: Ongeldig naampatroon.: PDM_MIGRATION .MIGR_FILTER</message>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>1078</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.convert.ConverterWorker</class>
      <line>316</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>1002</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>303</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>205</line>
    </frame>
    <frame>
      <class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
      <line>159</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTask</class>
      <line>193</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>oracle.dbtools.raptor.backgroundTask.RaptorTaskManager$RaptorFutureTask</class>
      <line>515</line>
    </frame>
    <frame>
      <class>java.util.concurrent.Executors$RunnableAdapter</class>
      <line>441</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask$Sync</class>
      <line>303</line>
    </frame>
    <frame>
      <class>java.util.concurrent.FutureTask</class>
      <line>138</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>886</line>
    </frame>
    <frame>
      <class>java.util.concurrent.ThreadPoolExecutor$Worker</class>
      <line>908</line>
    </frame>
    <frame>
      <class>java.lang.Thread</class>
      <line>662</line>
    </frame>
</exception>
</record>
<record>
<date>2013-08-14T16:23:32</date>
<logger>oracle.dbtools.migration.workbench.core.MigrationLogResourceBundle</logger>
<level>WARNING</level>
<class>oracle.dbtools.migration.workbench.core.ui.FullMigrateTask</class>
<message>Building converted model: FAILED : Database Migration : FAILED</message>
<param>oracle.dbtools.migration.workbench.core.logging.LogInfo@15a3779</param>
</record>
Does anybody know what this error means and what steps we should take to continue the migration?
I see the PDM_MIGRATION.MIGR_FILTER is a type.
Many thanks in advance,
Kris

Hi Wolfgang,
Thanks for your reply.
This is how the type MIGR_FILTER looks like:
create or replace
TYPE MIGR_FILTER IS OBJECT (
FILTER_TYPE INTEGER, -- Filter Types are 0-> ALL, 1->NAMELIST, 2->WHERE CLAUSE, 3->OBJECTID LIST
OBJTYPE VARCHAR2(40),
OBJECTIDS OBJECTIDLIST,
NAMES NAMELIST,
WHERECLAUSE VARCHAR2(1000));
I think the repository user has the correct privileges. This is the overview of privileges it has:
SQL> select * from dba_sys_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
GRANTEE PRIVILEGE ADM
PDM_MIGRATION ALTER SESSION NO
PDM_MIGRATION CREATE CLUSTER NO
PDM_MIGRATION CREATE DATABASE LINK NO
PDM_MIGRATION CREATE PROCEDURE NO
PDM_MIGRATION CREATE SEQUENCE NO
PDM_MIGRATION CREATE SESSION NO
PDM_MIGRATION CREATE SYNONYM NO
PDM_MIGRATION CREATE TABLE NO
PDM_MIGRATION CREATE TRIGGER NO
PDM_MIGRATION CREATE VIEW NO
PDM_MIGRATION UNLIMITED TABLESPACE NO
SQL> select * from dba_role_privs where GRANTEE in ('PDM_MIGRATION') order by GRANTEE;
GRANTEE GRANTED_ROLE ADM DEF
PDM_MIGRATION CONNECT NO YES
PDM_MIGRATION RESOURCE NO YES
Best regards,
Kris

ODBC connect to SQL Server 2005 from Oracle 10.2.0.3 32bit Linux

I’m unable to establish a connection from Oracle 10.2.0.3 32bit Linux to SQL Server 2005.
The ODBC driver is the 32bit DataDirect 5.3 drivers and when I do a status on the listener it does have a handler for SQLDB
Any help is appreciated.
Received the following error:
SQL> select count(*) from columns@SQLDB;
select count(*) from columns@SQLDB
ERROR at line 1:
ORA-28500: connection from ORACLE to a non-Oracle system returned this message:
[Generic Connectivity Using ODBC]DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077]
Could not find symbol 'SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library
'/app/DataDirect/lib/libodbc.so'
ORA-02063: preceding 3 lines from SQLDB
-----Contents of trace file------------------
Oracle Corporation --- THURSDAY JUL 10 2008 10:17:16.251
Version 10.2.0.3.0
hoagprd (2): ; hoagprd Entered.
HOACONN.C (244): ; [Generic Connectivity Using ODBC] version: 4.8.2.0.0080
HOACONN.C (288): ; Class version: 250
hoagprd (2): ; hoagprd Exited with retcode = 0.
hoainit (3): ; hoainit Entered.
(0): ; connect string is: defTdpName=SQLDB;SYNTAX=(ORACLE8_HOA, BASED_ON=
ORACLE8, IDENTIFIER_QUOTE_CHAR="", CASE_SENSITIVE=CASE_SENSITIVE_QUOTE);
BINDING=<navobj><binding><datasources><datasource name='SQLDB' type='GENERIC_
ODBC_FOR_HS' connect='SQLDB'><driverProperties/></datasource></datasources><
remoteMachines/><environment><optimizer noFlattener='true'/><misc
year2000Policy='-1' consumerApi='1' sessionBehavior='4'/><queryProcessor
parserDepth='2000' tokenSize='1000' noInsertParameterization='true'
noThreadedReadAhead='true' noCommandReuse='true'/><debug driverTrace='true'
generalTrace='true'/></environment></binding></navobj>
ORACLE GENERIC GATEWAY Log File Started at 2008-07-10T10:17:16
hoainit (3): ; hoainit Exited with retcode = 0.
hoalgon (7): ; hoalgon Entered. name = dbuser.
sysbase.c (677): ; libodbcinst.so: cannot open shared object file: No such
file or directory
DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
DB_ODBC_INTERFACE (727): ; [C077] Could not find symbol 'SQLAllocConnect' in
dynamic library
DRV_InitTdp: DB_ODBC_INTERFACE (718): ; [C077] Could not find symbol '
SQLAllocConnect' in dynamic library
DB_ODBC_INTERFACE (722): ; [C079] Failed to load dynamic library '/app/
DataDirect/lib/libodbc.so'
nvRETURN (./drv_bind.c 230): -2220
nvRETURN (./nav_bind.c 298): -2220
hoalgon (7): ; hoalgon Exited with retcode = 28500.
hoaexit (6): ; hoaexit Entered.
hoaexit (6): ; hoaexit Exited with retcode = 0.
(0): ; Closing log file at THU JUL 10 10:17:16 2008.
--------------end of trace file ---------------
--------TNS entry ----------
SQLDB=
(DESCRIPTION =
(ADDRESS =(PROTOCOL = TCP)
(Host = oracledbhost)
(Port = 1521)
(CONNECT_DATA = (SID =SQLDB)
(HS=OK)
-------Listener.ora entry----------
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(PROGRAM=hsodbc)
-------initSQLDB.ora----------
# This is a sample agent init file that contains the HS parameters that are
# needed for an ODBC Agent.
# HS init parameters
HS_FDS_CONNECT_INFO = SQLDB
HS_FDS_TRACE_LEVEL = 4
HS_FDS_TRACE_FILE_NAME=/app/DataDirect/SQLDB.trc
HS_FDS_SHAREABLE_NAME=/app/DataDirect/lib/libodbc.so
# ODBC specific environment variables
set ODBCINI=/app/DataDirect/odbc.ini
------odbc.ini entry------------
[SQLDB]
Driver=/app/DataDirect/lib/ivmsss23.so
Description=DataDirect 5.2 SQL Server Wire Protocol
Address=SQLServerhost,1401
AlternateServers=
AnsiNPW=Yes
ConnectionRetryCount=0
ConnectionRetryDelay=3
Database=SQLServerDB
LoadBalancing=0
LogonID=
Password=
QuotedId=No
SnapshotSerializable=0

The error message is indicating problems loading the driver manager.
A common issue on Linux (especially on Suse Linux) is related to library caching. First of all make sure you add the LD_LIBRARY_PATH to your listener.ora file to guarantee the correct libraries will be loaded. Your SID section will then look like:
(SID_DESC=
(SID_NAME=SQLDB)
(ORACLE_HOME=/app/oracle10g/product/10.2)
(ENVS=LD_LIBRARY_PATH=/app/oracle10g/product/10.2/lib:/app/DataDirect/lib)
(PROGRAM=hsodbc)
After changing the listener.ora file stop and start the listener.
Details about the set up can be found in Metalink note:
Note.264567.1 P216. How To Setup Generic Connectivity - HSODBC - on Linux
If this does not help enable strace and check out from which location libodbc.so is being loaded.
Please be also aware HSODBC has been desupported 15th of March. As you start a new project you should proceed with the follow up product DG4ODBC.

SQL Server reporting server 2005 having error. 'The report server is not responding. Verify that report server is running and can be accessed from this computer'

Hi team,
I got below error message in SQL Server 2005 reporting service.
''The report server is not responding. Verify that report server is running and can be accessed from this computer'
also in reports, i am getting below error:
"The encrypted value for the "LogonCred" configuration setting cannot be decrypted. (rsFailedToDecryptConfigInformation)
Get Online Help
The report server has encountered a configuration error. See the report server log files for more information. (rsServerConfigurationError)
Get Online Help "
Please find below log:
<Header>
<Product>Microsoft SQL Server Reporting Services Version 9.00.4060.00</Product>
<Locale>en-US</Locale>
<TimeZone>Eastern Daylight Time</TimeZone>
<Path>F:\Program Files\Microsoft SQL Server\MSSQL.6\Reporting Services\LogFiles\ReportServer__07_28_2014_09_08_41.log</Path>
<SystemName>MFLDDDBS04</SystemName>
<OSName>Microsoft Windows NT 5.2.3790 Service Pack 2</OSName>
<OSVersion>5.2.3790.131072</OSVersion>
</Header>
w3wp!webserver!1!7/28/2014-09:08:41:: i INFO: Reporting Web Server started
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing ConnectionType to '1' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsSchedulingService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsNotificationService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsEventService to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing PollingInterval to '10' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing WindowsServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MemoryLimit to '60' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing RecycleTime to '720' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaximumMemoryLimit to '80' percent as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxAppDomainUnloadTime to '30' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing MaxQueueThreads to '0' thread(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:41:: i INFO: Initializing IsWebServiceEnabled to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxActiveReqForOneUser to '20' requests(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing MaxScheduleWait to '5' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DatabaseQueryTimeout to '120' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing ProcessRecycleOptions to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsScavengerCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsDbCycle to '60' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing RunningRequestsAge to '30' second(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing CleanupCycleMinutes to '10' minute(s) as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DailyCleanupMinuteOfDay to default value of '120' minutes since midnight because it was not specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonFlags to '1064' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpOnExceptions to 'Microsoft.ReportingServices.Diagnostics.Utilities.InternalCatalogException,Microsoft.ReportingServices.Modeling.InternalModelingException' as specified in Configuration
file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WatsonDumpExcludeIfContainsExceptions to 'System.Data.SqlClient.SqlException,System.Threading.ThreadAbortException' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing SecureConnectionLevel to '0' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing DisplayErrorLink to 'True' as specified in Configuration file.
w3wp!library!1!7/28/2014-09:08:42:: i INFO: Initializing WebServiceUseFileShareStorage to 'False' as specified in Configuration file.
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Reporting Services starting SKU: Enterprise
w3wp!resourceutilities!1!7/28/2014-09:08:42:: i INFO: Evaluation copy: 0 days left
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information., CryptUnprotectData:
Win32 error:13;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration error. See the report server log files for more information.
w3wp!library!1!7/28/2014-09:08:42:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted., ;
Info: Microsoft.ReportingServices.Diagnostics.Utilities.FailedToDecryptConfigInformationException: The encrypted value for the "LogonCred" configuration setting cannot be decrypted. ---> Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. See the report server log files for more information.
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.UnprotectData(Byte[] data, Int32 dwFlags, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.DataProtectionLocal.LocalUnprotectData(String data, Boolean transitoryData)
   at Microsoft.ReportingServices.Diagnostics.RSConfiguration.DecryptCatalogData(String encryptedData, String element)
   --- End of inner exception stack trace ---

Hi Vivek,
In Reporting Services, values for LogonUser, LogonDomain, and LogonCred are created when the report server connection is configured to use a domain account. As to the error that “The encrypted value for the "LogonCred" configuration setting cannot be decrypted”,
we can know that it relates to the domain account for report server connection.
To fix this issue, we can refer to the following steps:
Log in to SQL Server Database Engine in SQL Server Management Studio.
Under Security folder, give sufficient permissions for your domain account.
Open your Reporting Services Configuration (go to Start -> All Programs -> Microsoft SQL Server 2005 -> Configuration Tools -> Reporting Services Configuration)
Navigate to the Database Setup tab, select ‘Service Credentials’ as the Credentials Type, then type your domain account and password in there. Press Apply.
Restart the Report Server services.
Reference:
http://social.msdn.microsoft.com/Forums/sqlserver/en-US/2d05b404-83aa-4fb2-bba6-52b587e890ec/sql-2005-rs-configuration-tool-encryption-key-error
Hope this helps.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Importing Data from MS Access into SQL Serevr 2005 via Linked Server: User-Dependent failure

I am operating an Express version of SQL Server 2005 on a Windows XP machine.
I have successfully setup a linked server to a remote Access (.mdb) database. With my user account (Windows authentication) I can retrieve and store data without any problem.
I have another user (apparently with same settings as my own account) that is always failing to get the data.
The Error message he gets is:
OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TSU_Tmp" returned message "The Microsoft Jet database engine cannot open the file '\\DSITSO-NT0001\Exchange\Database5.mdb'. It is already opened exclusively by another
user, or you need permission to view its data.".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "Microsoft.Jet.OLEDB.4.0" for linked server "TSU_Tmp".
Here below the code used to set up the linked server (coming from the Code Snippets of SQL Server 2005).
EXEC sp_addlinkedserver
@server = N'TSU_Tmp',
@provider = N'Microsoft.Jet.OLEDB.4.0',
@srvproduct = N'OLE DB Provider for Jet',
@datasrc = N'\\DSITSO-NT0001\Exchange\Database5.mdb'
EXEC sp_addlinkedsrvlogin
@rmtsrvname = N'TSU_Tmp',
@useself = N'TRUE',
@locallogin = NULL,
@rmtuser = N'Admin',
@rmtpassword = NULL
We both run the script, actually is a Stored Procedure, (see code below) on the same XP machine where SQL Server is running.
EXEC('INSERT INTO tblFcst
(StartBUCode, StartBUType, StartBUSeq, StartTrz, StartCty,
EndBUCode, EndBUType, EndBUSeq, EndTrz, EndCty,
FcstCreationPeriod, FcstValidForPeriod, Fcst, FcstExternalReference,
IsProcessed, IsSolved)
SELECT TSU.BUCodeSend, TSU.BUTypeSend, TSU.BuaNoSend, Null AS StartTrz, Null AS StartCty,
TSU.BUCodeRcv, TSU.BUTypeRcv, TSU.BuaNoRcv, Null AS EndTrz, Null AS EndCty,
TSU.[Current week], TSU.[Forecast for week], TSU.[Volume trp m3], TSU.[TSU_ID (Don''t touch me)],
0 AS IsProcessed, 0 AS IsSolved
FROM TSU_Tmp...tbl_TSU_trpm3 AS TSU;')
PS: it is run using an 'EXEC(String)' format as at compile time of Store Procedure the Linked Server is not existing and otherwise compile would fail.
We tried it with different files, in different locations. It always wors for me, never for him...
The files were not used by anyone else. The folder(s) where they were stored are open to "Everyone".
So I concluded it should be something linked to the User... :) But I really do not know what, as said apparently we have exactely the same setup in our Login profiles.
Any idea or suggestion is welcome.
Thanks
Luca

Hi Luca Lentati,
According to your description and T-SQL statement, we need to verify if the download and install the Microsoft.Jet.OleDB.4.0 as a provider.
If the 64bit SQL Server is running on the server, The error, the Microsoft.Jet.OleDB.4.0 is not support, I reommend you download and install the Microsoft.ACE.OLEDB.12.0 as a provider.
The error 7303 message indicates that the linked server does not have correct login mapping. You can execute the sp_helplinkedsrvlogin stored procedure to set the login information correctly. Also, verify that you have specified the correct parameters
for the linked server configuration.
In addition, if the issue still exists, I recommend you copy the access file to local Server, and create linked server between them , check if it can run well. If yes, it means that
the account which SQL server uses to run the service does not have read/write access to that file share.
There is an article about configuring a Linked Microsoft Access Server on SQL 2005 Server , you can review the following article.
http://www.aspfree.com/c/a/Microsoft-Access/Configuring-a-Linked-Microsoft-Access-Server-on-SQL-2005-Server/
Regards,
Sofiya Li
Sofiya Li
TechNet Community Support

Reading BLOB from SQL Server 2005 using DB Link from Oracle 10g

Hi All,
I am trying to read a table's data from SQL Server 2005 using ODBC DB Link created in Oracle 10g (10.2.0.3/4) database. I am not using oracle gateway.
I am able read all data except for the BLOB data from SQL server 2005. It gives error given below when I try to execute query SELECT * from T_TRANSACTION_DATA@sdeslink inside a stored procedure:
ORA-22992: cannot use LOB locators selected from remote tables
Kindly help how to read BLOB from SQL server 2005 inside Oracle 10g.
Best Regards!
Irfan

Irfan,
If you can read the blob data using 10.2 HSODBC then there should be no problem using the 11g gateway.
I recommend you download the latest version which is 11.2.0.3 available from My oracle Support as -
Patch 10404530: 11.2.0.3.0 PATCH SET FOR ORACLE DATABASE SERVER
This is a full version and does not need a previous version to have bene installed. When installing it needs to be in a completlely separate ORACLE_HOME from the existing 11.2 install.
For the Ora-22992 problem have a look at this note in My Oracle Support -
Ora-22992 has a workaround in 10gR2 (Doc ID 436707.1)
Regards,
Mike

Migration from sql server 2005 tables to oracle tables.

Hi,
Kindly give the steps to migrate from sql server 2005 tables to oracle tables.
Kindly advise
Oracle database version:
Oracle Database 10g Release 10.2.0.1.0 - Production
PL/SQL Release 10.2.0.1.0 - Production
"CORE 10.2.0.1.0 Production"
TNS for 32-bit Windows: Version 10.2.0.1.0 - Production
NLSRTL Version 10.2.0.1.0 - Production
Edited by: 873127 on Jul 18, 2011 9:46 PM

Are you migrating or taking continual updates?
If migrating it might be worth considering The SQLDeveloper Migration Workbench (which moves more than just data)..
http://www.oracle.com/technetwork/database/migration/sqldevmigrationworkbench-132899.pdf
Cheers
David

Sql server replication from SQL SERVER VERSION(7.0) to SQL SERVER 2005

Similar Messages

Maybe you are looking for