SSRS reports are not fitting properly in Report Viewer Control

Hi All,
We are using Report Viewer Control to render SSRS reports & show it on SharePoint web page. In .aspx page we are putting Report Viewer Control as follows:
The zoom percent of Report we are getting from Report Server is 100%. We are making it as 50% to show it on our page. On one page, we are showing 2 reports.
<rsweb:ReportViewer ID="rpv2Chart1" runat="server" Font-Names="Verdana" Font-Size="8pt" ProcessingMode="Remote" Height="211px" Width="813px" ZoomPercent="50"></rsweb:ReportViewer >
The reports are coming. But the reports which we are getting inside the control are not readable & 25% of Report Viewer Control on our right hand side is blank.
As you can see it's not readable. For readability we want to use that white space also & want to utilize full controls's space. But if we try to increase percentage from our report viewer tag, then the graph is zooming in with both, height & width
so it's going out of control.
Client don't want scroll bars on Report Viewer control. We just want to utilize the entire Report Viewer Control space.
Can anyone suggest us how to do that?
Thanks,
Sanjay

Hi Sanjay,
I'm afraid that it is not the correct forum for this issue.
If it is the SSRS issue, you could post this issue here:
http://social.technet.microsoft.com/Forums/sqlserver/en-US/home?forum=sqlreportingservices
If it is the VS report control issue, maybe you would get better response here:
http://social.msdn.microsoft.com/Forums/en-US/home?forum=vsreportcontrols
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Similar Messages

  • Japanese characters are not displayed properly - Crystal Report XI

    Hello,
    We are upgrading reports from CR8 to CR11.
    When I preview the CR8 report I can see the Japanese Characters (Coming from Database).
    After saving the CR8 report as CR11 report, When I preview the report I cannot see the Japanese Character which I was able to see in CR8.
    Why I am seeing unknown characters in CR11? When CR8 displays Japanese, then CR11 should display right?
    Please help.
    Thanks in advance.

    These are simply community forums - not technical support as such. You may, or may not get an answer. If you do need to contact technical support, you may want to consider obtaining a one case phone support contract from here;
    http://store.businessobjects.com/store/bobjamer/DisplayProductByTypePage&parentCategoryID=&categoryID=11522300
    Ludek

  • My earphones are not fitting properly in my ipod nano 6th gen. it is not flushed and i have tries with many earphones but the same problem is there. What is the problem?

    It is in warranty does it need some repair?

    Get a magnifying glass and a flashlight and make sure there is not something in the jack interfering with entry. If there is not, push harder.

  • Reports are not posting with report repository webserver configured for Sin

    Hi Everyone,
    We have configured Single Signon on our Test environment (UADB1) using Sun Authentication Manager. Everything went well, we can login using our LDAP accounts except for one thing. The reports are not posting to the report repository.
    Our setup goes like this. We have used only one webserver for login and for report repository purposes. SSL certificate was configured in the webserver and we are using https in the report node. Both URLs https://dv001.test.com:8450 and http://dv001.test.com:8400 were configured for Single Signon.
    Report Node Definition
    Node Name: uadb1
    URL: https://dv001.test.com:8450/psreports/uadb1
    Connection Information
    https
    URI Port: 8450
    URI Host: dv001.test.com
    URI Resource: SchedulerTransfer/uadb1
    Below is the error I am getting. If I will use another webserver which is not the Single Signon configured as report repository the reports are posting. So, I am thinking this has something to do with the Single Signon setup and SSL. ANy idea? Thanks.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) 1. Process Instance: 9499/Report Id: 8465/Descr: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:43 PostReport](3) from directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_9499
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) (JNIUTIL): Java exception thrown: java.net.SocketException: Unexpected end of file from server
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) HTTP transfer error.
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](3) Post Report Elapsed Time: 0.2300
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) =================================Error===============================
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](1) Unable to post report/log file for Process Instance: 9499, Report Id: 8465
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Process Name: PRCSYSPURGE, Type: Application Engine
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Description: Process Scheduler System Purge
    PSDSTSRV.2093190 (10) [06/13/10 01:05:44 PostReport](2) Directory: /psft/pt849/appserv/prcs/UADB1/log_output/AE_PRCSYSPURGE_94

    Duplicated thread : Reports not posting if using Single Signon webserver as report repo
    Nicolas.

  • SSRS 2012 some users are not able to edit reports in the server

    Hello All,
    I am install reporting services SharePoint native mode but some users are not able to edit reports on server error is "Application cannot be started contact your application vendor" but this users edit reports on their client machine
    using report builder 3.0.
    Please help me

    Hi harshad_mule,
    Because Report Builder in the Report Manager is a ClickOnce application, the error message means that one or more of the files listed in the application manifest cannot be found on the server, so the application cannot be started. Based on my research, frequently
    this means that the application is somehow corrupted, or that the ClickOnce store is corrupted.
    To fix this issue, we can try to refer to the following steps:
    If Report Builder is corrupted, we can update the Reporting Services to repair this.
    Check that the Report Builder application is existing
        Open the Report Server folder. By default, the folder is located in: C:\Program Files\Microsoft SQL Server\MSSQL.<X>\Reporting Services\ReportServer\ReportBuilder
        Make sure the file "ReportBuilder.application" is existing in the folder mentioned above.
    If it is existing, please use the following URL to access the Report Builder directly:
    http://<server>/ReportServer/ReportBuilder/ReportBuilder.application
    And this issue can also be caused by browser. Because not all report functionality is supported by all browsers in Reporting Services. So please use IE browser to start Report Builder to try it again.
    Hope this helps.
    Thanks,
    Katherine Xiong
    Katherine Xiong
    TechNet Community Support

  • Data Migration Opening Balances are not updating in the Report F.08

    Hi,
    We have uploaded the GL balances in 2008 for the year 2007. But they are not updating in the F.08 report when i executed for 2008.
    Why they are not updating in the report. In which table can i check the Data migration values in the system?
    Thansk
    Kishore

    Hi We have uploaded all the values in 2008 with 2008 date. fiscal year is K4.
    F.08 Report for the year 2008 is showing only 2008 accumulated values. But not showing the Opening balances which we have uploaded in 2008 for the before years like 2007.
    Why it is showing like that?
    Thansk
    kishore

  • Reports are not called from form in browser plz help

    Hi,
    I have installed 9iAS+8.1.7 database on the same machine with NT4 server.My system's forms(.fmx) are running well but my reports are not running from my main form.i call reports from the
    from as,
    Run_Product(reports,'..\iReports\xglrxx12.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);
    Actually want to know the report's setting when calling from the from in a browser(environment variables,virtual paths etc.).
    My database is installed in drive E:\8idb_home\ and 9iAS is on
    G:\9iAS_home\.My systems .fmx & .rep files are in "iforms" and "ireports" folder respectively.
    Plz help!
    Many thanks!

    Hi,
    First of all thanks to Vincent Botteman for solving the prob.
    Yes when i changed my call of run_product by excluding the path i have specified when calling from form it then makes a result.
    Also specified the entry of your reports .rep files by giving path in reports60_path registery variable as,
    Run regedit-->Hkey_Local_Machine-->Software-->Oracle here give the full path of your .rep files as an first entry in reports60_path variable.And finally not mention the path when calling reports from form as,
    Run_Product(reports,'xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Correct way.
    Run_Product(reports,'..\iReports\xglrxx13.rep',synchronous,RUNTIME,FILESYSTEM,pl_id,null);<--- Wrong way.
    Regards!

  • Reports are not able to run coz of Block Corruption

    Hi all,
    I have reported some Oracle finance reports are not running.
    Once i got the call i looked into the user trace file, there i found the below :
    Corrupt block dba: 0x2100f345 file=33. blocknum=62277. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f345 file=33. blocknum=62277. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62277
    Corrupt block dba: 0x2100f346 file=33. blocknum=62278. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2100f346 file=33. blocknum=62278. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 62278
    Then i try to find out which table is affected by the below queary :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 62278 between block_id and block_idblocks -1;+
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    So this above table GL_JE_LINES is the affected table is init.
    Now what is the action i have to take. In this database there is no archive log enabled and version of this database is 7.
    Can any one sugges me what is the action i have to take now.
    Regards
    Hamid

    DB version :
    SQL> select * from v$version;
    BANNER
    Oracle7 Server Release 7.3.4.3.0 - Production
    PL/SQL Release 2.3.4.3.0 - Production
    CORE Version 3.5.4.0.0 - Production
    TNS for IBM/AIX RISC System/6000: Version 2.3.4.0.0 - Production
    NLSRTL Version 3.2.4.0.0 - Production
    Alert log :
    SID>tail -f alert_SID.log
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 14:35:03 2012
    Errors in file /u20/app/oracle/admin/APRD/udump/ora_84426_aprd.trc:
    Tue Sep 25 15:09:18 2012
    create tablespace tbs datafile '/stage/software/APRD/oradata/tbsnew.dbf' size 10                                                                             0m
    Tue Sep 25 15:09:27 2012
    Completed: create tablespace tbs datafile '/stage/software/AP...
    Trace file :
    SID>tail -f ora_84426_aprd.trc
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d366 file=33. blocknum=119654. found same corupted data
    table scan: segment: file# 15 block# 84
    skipping corrupt block file# 33 block# 119654
    Corrupt block dba: 0x2101d367 file=33. blocknum=119655. found during buffer read
    on disk type:0. ver:0. dba: 0x00000000 inc:0x00000000 seq:0x00000000 incseq:0x00000000
    Entire contents of block is zero - block never written
    Reread of block=2101d367 file=33. blocknum=119655. found same corupted
    For this above :
    SQL> select segment_type,owner,segment_name from dba_extents where file_id=33 and 119654 between block_id and block_id+blocks -1;
    SEGMENT_TYPE      OWNER
    SEGMENT_NAME
    TABLE             GL
    GL_JE_LINES
    Regards
    Hamid

  • Reports are not run in WAN using OAS10g R2 on MS Server2003? urgent help

    My Forms and Reports was run successfully using Oracle AS10gR2 installing on Win XP on Server in my LAN and WAN environment. So every thing is working fine using Win XP on my server Machine.
    But when I install MS Server 2003 and Oracle AS10gR2 on my server machine. Forms and reports are run successfully in LAN but in WAN forms are run successfully and reports are not running?
    Please send me the solution on urgent.
    Thanks.
    Shahzad

    Hi Paul,
    We recently upgraded our SCCM 2012 R2 servers to OS 2012 R2, Now i could not able to see the path you mention in your blog.
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\100\Shared\sqlmgmproviderxpsp2up.mof”
    Bear in mind that the above command is for SQL Server 2008 and it assumes that SQL is installed in its default location.
    The command for SQL Server 2012 is:
    mofcomp.exe “C:\Program
    Files (x86)\Microsoft SQL Server\110\Shared\sqlmgmproviderxpsp2up.mof”
    I can only see D:\Program Files (x86)\Microsoft SQL Server\100\<Below
    folders>
    DTS
    SDK
    Tools
    srkr

  • Reports are not matching

    Hi,
    There is a reporting problem with one of our projects. We use reports S_ALR_87013542 (Display Actual Cost Line Items for Project) and CN41(Structure Overview). The balance being displayed by these two reports are not matching. Why the different amounts are showing up in these two reports and how do I find out the correct amount which still remains in the Project.
    Your suggestions/inputs will be highly appreciated.
    Regards,
    Bala

    Hi,
    Thanks for your inputs. I have 2 queries here...
    1. Whether the reports S_ALR_87013542 & CN41 are same displaying the same information?
    2. How can I check the Balance amount still remaining in the project? Is there any report?
    Thanks & regards,
    Bala

  • Grand total values are not matching with Detail report

    Report has grand totals and when I drill to the detail report, grand total values are NOT matching with parent report totals, I did some analysis but I'm clueless on this issue.
    Please provide your thoughts and insight on this issue..
    Thanks

    is your summary and detail reports hitting different facts, like summary hitting aggregate and detail report hitting it's corresponding detail level fact..?
    if then,
    From Front-end:
    Fix the filter values in detail report that are passing from master report then try delete each columns then check the grand total. If you found your values is matching by deleting particular column then you need to investigate what is the issue around with that dimension table..
    From Database side:
    1. check first aggregate table has proper aggregate data of it's detail..
    2. Take the detail report obiee generated query and try to comment each dimension table and it's corresponding joins to the facts, (before, this delete all the dimensional columns and other measures from select statement and put only that measure where you are getting wrong value, so that you need not to comment all the select and group by columns which saves your time.. ). Need to check by commenting each dimensional wid and it's table from clause, if you found that values is matching then there is some problem with wid columns data population in your ETL.
    Is that BI-Apps project?
    btw, whtz ur name?

  • Business Objects 3.1 reports are not working with IE 10.

    Hi,
    Recently I upgraded my internet explorer to IE10.. Since then business objects 3.1 reports are not opening in IE10.0
    Getting error message "webpage can't be found".
    I am not sure whether BO 3.1 reports work with IE 10.0 or not.
    Please advise
    Thanks
    Sat

    Did you try with other browsers ?
    IE 10 (Compatibility View display mode) with Oracle Java 6 / Oracle Java 7 is supported for BOXI3.1 SP6.
    Please check the PAM for details of your SP level.

  • Some reports are not displayed -- JInitiator 1.3.17 to JRE 1.6.43

    We have our Medical Suite developed using Oracle Forms 10gR1(9.0.4) version.As we came to know that JInitiator is no more supported from Oracle and it has many problems Windows 7 64 bit esp.., with IE (9.0) recently we have migrated the Client PC's from JInitiator 1.3.17 to JRE 1.6.43.
    Unfortunately when we print the reports, some of the reports are being displayed and the other reports are not being displayed ( No action upon on clicking print button).
    But when we revert back to JInitiator all the reports are working fine without any change in IE configuration. So can someone give me the probable cause for this behaviour.
    Edited by: Chaitu on Mar 17, 2013 8:57 AM

    Chaitu wrote:
    If the parameter are written in multiple lines using concatenation then there is no problem, but some places we made the DESTYPE OR CACHE OR DESFORMAT in different lines and it is working fine when we used Jinitiator 1.3.17.
    Once we changed to JRE, it stopped working maybe because the command cannot be issued to browser since it is incomplete.
    Is 10.1.2.3 a stand alone patchset given by Oracle for migrating 10g R1 to 10g R2 or there are some other patches given before this patchset(10.1.2.3).
    I am asking this because most of the times, Oracle releases a patch in sequential order and they should be installed in the same order.
    For example In order to install Enterprise Manager 10g Grid Control Release 5 (10.2.0.5), we must have 10.2.0.1.0 (10.2.0.2.0 for Windows) release up and running. So I was not sure whether this patch can be installed alone without any other combinations directly. Please enlighten me if you can.
    Hi Chaitu,
    patchset(10.1.2.3) is applicable for the following releases only:
    Oracle Application Server 10g Release 2 (10.1.2.0.0)
    Oracle Application Server 10g Release 2 Standard Edition One (10.1.2.0.1)
    Oracle Application Server 10g Release 2 (10.1.2.0.2)
    Oracle Application Server Forms and Reports Services (10.1.2.0.2)
    Oracle Application Server Portal 10g Release 2 (10.1.4)
    Oracle Application Server Portal 10g Release 2 Patch Set 2 (10.1.4.1)
    Oracle Developer Suite 10g (10.1.2.0.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2)
    Oracle Business Intelligence 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2)
    Oracle Business Intelligence Tools 10g Release 2 (10.1.2.0.2)
    Oracle Business Intelligence Tools 10g (10.1.2.0.2) that shipped as part of Oracle Developer Suite 10g Release 2 (10.1.2)
    OracleAS 10g Release 2 Patch Set 1 (10.1.2.1.0)
    OracleAS 10g Release 2 Patch Set 2 (10.1.2.2.0)
    Hope this helps
    Hamid
    * batter discuss at {forum:id=82} forum.

  • Changes are not applying to the reports

    hi all
    i have moved the RPD and catalog file to UAT there i got few changes
    i did the changes in DVE and again i moved the changed reports to UAT ,but the report changes are not applied in UAT
    so i again i copied same RPD and catalog to UAT now it is working fine,
    why the changes are not applied to the reports that i have moved to UAT
    is it mandatory to move RPD and catalog to the other environment ??
    Thanks

    Hi,
    if you change even the filters and column names you cant modify only reports and place them in UAT,if you want to cnahge that way there is a tool CAF follow this link how to do that process
    http://debaatobiee.wordpress.com/category/obiee/setup-and-environment/
    If not you need to deploy RPD and catalog into UAT.
    By,
    KK

  • Help!  PDFs are not printing because adobe reporting that postscript conversion needed?

    Help!  PDFs are not printing because adobe reporting that postscript conversion needed?  Can someone help me?  Please?

    Please give us the complete error message, every word. This is not a familiar symptom.
    Also: What software and version are you printing from? What system do you have?

Maybe you are looking for