SSRS tablix not be visible when no data is selected to display on the report
In an SSRS 2008 r2 existing dashboard application, I display a tablix (as a header) based upon the following selection criteria:
=iif(Len(First(Fields!CustomerNumber.Value, "Main")) = 0, true, false).
The CustomerNumber value is passed between the various SSRS reports in the dashboard application. There are times when the Fields!CustomerNumber.Value is selected for a particular report and there is no detail data to display. What happens with the existing
reports, is the space that would be allocated for the tablix is shown.
When there is no data to display, there is a NoRowsmessage that can be displayed on the report.
Basically when there are no detail records to display on the report, I would like the tablix report header not to display when there is no detail data for the report.
Thus can you tell me how to code the tablix report header not to display when there is no detail data?
Sorry, I overlooked Katherine's simple solution, partly because the header doesn't go away, it is just replaced with something that cannot be differentiated from the report background. Keep in mind that the space the tablix is in is still occupied by the
tablix as you can see below:
Sample report with no data and an empty rows message of " ".
Above is the same report without a no rows message but with the header row hidden using thisformula: =IIf(Count(1)>0, false, true). You can see that the space that the header normally occupies is collapsed away when hiding the header whereas the spaces
(" ") occupy that space when using the no rows message.
"You will find a fortune, though it will not be the one you seek." -
Blind Seer, O Brother Where Art Thou
Please Mark posts as answers or helpful so that others may find the fortune they seek.
Similar Messages
-
Ssrs generates blank extra page when no data is selected
In a new SSRS 2008 report that I just setup, there are 5 datasets that are located on the main report that refer uniquely to 5 tablixes. There are no subreports for performance reasons. The purpose of the ssrs report is to export data to excel and
have each report go to a separate tab in the excel workbook. This occus since on each tablix, has the 'add a page break after', 'repeat header columns on each page', and 'keep header visible while scrolling'.
These reports do export to different tabs in excel when they contain data.
On each of the tablixes I have the 'NoRowsMessage' filled in in case there is no data.
The problem occurs when there is no data for a tab (unique report) and only 1 report selected. The error message is generated and there is a blank page after the error message is generate. Is there a way for me to get rid of the blank page after the report
is generated that says there is no data selected?In a new SSRS 2008 report that I just setup, there are 5 datasets that are located on the main report that refer uniquely to 5 tablixes. There are no subreports for performance reasons. The purpose of the ssrs report is to export data to excel and
have each report go to a separate tab in the excel workbook. This occus since on each tablix, has the 'add a page break after', 'repeat header columns on each page', and 'keep header visible while scrolling'.
These reports do export to different tabs in excel when they contain data.
On each of the tablixes I have the 'NoRowsMessage' filled in in case there is no data.
The problem occurs when there is no data for a tab (unique report). The message I want for no rows does show up, but the message does not create a new tab in excel. The message appears on top of one of the reports that does have data.
Thus when there is 'no data' for report(s), is there a way in ssrs 2008 to have that message appear on unique tabs in excel when the data is exported to excel? If this is possible, can you tell me how to accomplish this goal? -
Hi am trying to save Data into a write to measurement file vi using a NI PXI 1042Q and DAQ NI PXI-6229 with a real time mode but it is not working but when i run it without uploading it into the PXI it save in to the file please find attached my vi
Attachments:
PWMs.vi 130 KBother problem is that the channel DAQmx only works at real time mode not on stand alone vi using Labview 8.2 and Real time 8.2
-
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely
Dear Zak,
thank you very much! Your information solved the problem immediately!
Best regards,
Philipp Frank
New website
www.philippfrank.at<http://www.philippfrank.at>
Dipl Ing Philipp Frank
1010 Wien
Jakobergasse 4/14
+43 1 513 22 83 19
+43 650 250 5000
[email protected]<mailto:[email protected]>
www.philippfrank.at
Von: Zak Williamson (Adobe)
Gesendet: Montag, 23. Juni 2014 20:40
An: Dipl Ing Philipp Frank
Betreff: have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
have installed cc2014, menues are not fully visible. when changing font, system (all new sony vaio, win 8.1) crashes completely.
created by Zak Williamson (Adobe)<https://forums.adobe.com/people/ZakWilliamson%28Adobe%29> in Help with using Adobe Muse CC - View the full discussion<https://forums.adobe.com/message/6488371#6488371> -
I create blog posts . Their publish date are different from now and their publish date are the early months. For example i create 30 blog bosts in 15.08.2014. But 10 blog posts' publish date is 15.04.2013,20 blog posts' publish date is 15.03.2012. I can
not see them in the blog archive part. There must be April 2013 and March 2012 in the archive part,but i can not see them.
How can i see them in the blog archive webpart?
When i create a blog post, what is the main issue about the date? What is the main issue about date about grouping them.
How can i show the blog posts according to the publish date not create date? İs it possible?
Can you help me please?It seems you created another thread for same issue. Let's wait for the response from original thread, instead of creating a new one.
http://social.msdn.microsoft.com/Forums/en-US/2a3f7d99-c74b-4554-94bf-e597a88b5425/blog-archive-webpart-does-not-list-posts-when-publish-date-is-about-early-monthsyears-in-sharepoint?forum=sharepointcustomization
My Blog- http://www.sharepoint-journey.com|
If a post answers your question, please click Mark As Answer on that post and Vote as Helpful -
Hi,
I cannot reopen library. During opening aperture I can see a list of libraries. After selection "Aperture library.aplibrary" (default I guess) msg box is open
"Library info directory path contains a file where a folder was expected.
The Aperture Library could not be created at “/Volumes/Data/Aperture Library.aplibrary”. Check the path and try again."
Moreover, aperture library is not visible in other apps like Final Cut X Pro. I assume this is caused by the aperture problem.
Can anybody help me?Sounds strange.
Did you try to double click your "Aperture Library.aplibrary"?
Maybe trying to open backuped library...
Or creating a new library by pressing the alt key when clicking on the Aperture Dock icon. -
Udf Data is not being displayed in the report
Hi all,
i have designed one report in which i am displaying some udf fields along with other system fields.
i have not used any selection criteria.
when i run report it doesn't display udf data of some random rows in the report even if data is peresent in that udf field.
If i open sales order and press 'Shift-F2' and update the document and now if i run report then i get that udf value in the report.
why this happening. data is there in the udf field only its not displayed in the report with out updating the that udf.
pls suggest some solution.
regsrds,
Chetan.Hi Ashish,
I ran the "ZPS/!ZPS" in RSRT where ZPS is the infoset name. In Dev, it displayed the values. In QA, it displayed the below messages:
ECharacteristic 0TCAKYFNM does not exist. Check authorizations
WThere are calculated elements. These results are bracketed [ ]
and below that, it displayed the values for Number of records. But, it has not displayed the values for the other figures.
Does this has any impact in QA.
Thanks & Regards,
AVN Rao. -
I had the geek squad from bestbuy supposedly install iphoto 11 on my mac but it is not there and when i try to download it it say the app has been download by another user on this machine. What do i need to do get get this app on my system? If they could not do it right the first time I do not have much faith in their advice.
Assuming you've done a system wide search for it including the Applications folder and it's not there......
I think you will need to address this with them - did you pay them for the application? Or was your purchase price to include it? And the question(s) to ask them:
If the app store states that it has been downloaded, ask them where it is and which Apple ID they used. (the store keeps track of Apple IDs and machine IDs on everything you download).
I have absolutely no faith in their advice; however, in this case, it's not so much technical advice, but an answer to your questions: you paid for something and it appears not to be there. -
Drag and drop not working. When trying to move a cell or icon the shadow of the cell or icon being moved appears under the cursor but can't be released causing a freeze of function within the program. Happens in finder numbers, firefox, and when trying to move any file from the downloads folder.
This is a serious pain.
Please help.
WBYes, all I can tell you is that Finder does not have that function in ML. Your system is "working as expected".
You can file feedback here. -
My book will not up load when I try to buy it. Can the book be too long?
my book will not up load when I try to buy it. Can the book be too long?
While in Safe Mode made a PDF file of the book as described in this Apple document,. iPhoto '11: Preview a book, card, or calendar before you order or print it, and check it for any errors before you place the order. Keep it to compare with the printed book when it arrives.
OT -
I am very sure I have " find my iPod" on my iPod device but , it's not coming up when I try to look for it in the radar?! Unfortunately my iPod was stolen at school. Any help
lost/stolen
No app on the iPod is required.
- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected, on a computer browser go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone. If the iPod has been restored it will never show up or conbtinue to show off-line.
- You can also wipe/erase the iPod and have the iPod play a sound via iCloud.
iCloud: Erase your device
iCloud: Use Lost Mode
- If not shown, then you will have to use the old fashioned way, like if you lost a wallet or purse.
- Change the passwords for all accounts used on the iPod and report to police
- There is no way to prevent someone from restoring the iPod (it erases it) using it unless you had iOS 7 on the device. With iOS 7, one has to enter the Apple ID and password to restore the device.
- Apple will do nothing without a court order
Reporting a lost or stolen Apple product
- iOS: How to find the serial number, IMEI, MEID, CDN, and ICCID number -
Hi. I have Snap To Grid and By Kind enabled in Lion but it's not working. When I trash an icon, instead of snapping the remaining icons to the By Kind grid, a space is left where the trashed icon was. Any suggestions on how to get Snap To Grid working?
Where are you talking about the Desktop?
I don't see where it is possible to set both Snap to Grid and By Kind they seem to be mutually exclusive.
And then
If I have Snap to grid set I get the behavior you describe. If I have By Kind set the icons stay together and close up the space from the deleted icon.
regards -
I have ipod nano 4gb silver No: MA978ZP/A. IT IS NOT FUNCTIONING. WHEN I PUT USB INTO MY SYSTEM PORT, THE APPLE SYSTEM IN THE IPOD SCREEN IS BLINING ON AND OFF WHAT SHOULD I DO
See if this helps:
iOS: Unable to Update or Restore -
Using 10.9.2 has anyone had problems with mail sounds not sounding even when they have been selected in mail preferences?
Your download or install of the update may have been corrupt. Visit the Mac App Store and re-download the update or visit http://support.apple.com/kb/DL1726 and download the 10.9.2 update combo and re-install.
If that fails to solve the problem please post back and post a EtreCheck Report which you can locate at:
http://www.etresoft.com/etrecheck -
Data issue with Navigational Attribute in the report
Hi Experts,
We have a report which has Material and Material Group in the report. Material Group is a navigational attribute of 0Material. We have some 31 material groups in the ODS. However, the report is diaplaying only 3 material Groups. If I use Material Group directly( not as an attribute of material) then it is displaying all the 31 material groups correctly.
We have a hierarchy which is loaded through Flat file on Material Group. We need the hierarchy to be displayed for all the material groups in the ODS. Please let me know what could be causing this issue?
Thanks and Regards,
Kavitha JagannathHello Kavitha,
Check if the Material Masterdata is having these Material groups. If not then load this Material masterdata and activate it.
As your query is using Material group as Navigational attribute then the data should come from this Material Masterdata.
If your Material has only 3 of th eMat Groups then report will show only 3. Better update this Material masterdata.
Regards,
Pratap Sone
Maybe you are looking for
-
Each time i try to connect my ipod it keeps coming up with a duplicate file name was specified,
can some one help me, each time i plug my ipod into the computor it keeps saying ,, a duplicate file name was specified, how can i change this file name ,,it seems to be the name of the ipod ,,?
-
i have install the GM version for my iPod Touch,did i need to do anything to change to public version? restore or else?
-
Dear all, We have a rather strange and a very high priority problem while using the BADI WORKORDER_UPDATE for creation of Maintenance orders. We have added some bespoke code into the method BEFORE_UPDATE of the BADI WORKORDER_UPDATE and expect it to
-
Multiple Event Listeners on same property?
I have assigned two event listeners to the same property: full_loader1.contentLoaderInfo.addEventListener (Event.COMPLETE, fullLoaded1); full_loader1.contentLoaderInfo.addEventListener (Event.COMPLETE, tweenOut2); So far it works fine. I am just wond
-
I have a Sony DCR-HC 32 Handycam. When I connect the camera to my computer iMovie 5.0.1 recognizes that the camera is connected. I can control the camera from my computer (play, pause, fastforward). However, I cannot view the video on my computer scr