STB # 7216 Set Up Menu Settings

 Verizon replaced my old STB # 6416 with a # 7216 due to problem I had with changing the hidden 'set up menu'. For my Marantz receiver (does not have HDMI slots) to use surround sound on my new Samsung 7100 series Smart TV, I need to change the 'additional HDMI settings' in the set up menu on the 7416. 
 When you can finally get to the hidden menu (must depress power-select-menu buttons 'quickly) you can change the additional HDMI settings to 'passthrough'. This will then allow me to change the Sound setting on the TV to Dolby from PCM (anyone know what that is?). Will work surround sound fine.
 PROBLEM:
If the STB is powered off and on again, it loses the setting change to passthrough and reverts to a default setting.
Tv Sound setting reverts back to PCM and no surround sound again. I read in one blog to just don't turn off power to STB. 
Last night I turned ogg TV and Receiver without using Verizon remote to leave STB power on. This am the STB had reverted back to defaults as the 'ligt' showing the STB up was not on. Must power itself down internally.
 Anyone know how to get the STB to maintain changes made in set up menu? Is there another box (7232)?
Does Direvt TV have this issue?

I have 4 different models of Samsung Smart tv's (all plasma rather than LCD) and have no problem.  Must be specific models.
PCM is uncompressed digital.  Most new HDTV's will handle that even if they don't handle dolby.  It includes surround sound.  Your receiver may or may not.  I believe Verizon sends PCM for most SD channels as they are not sent in Dolby.
Not heard of the setting getting lost. 

Similar Messages

  • Cannot access QIP 7216 set-up menu

    The instructions say "Power off the QIP receiver and then immediately press the MENU key on the front panel."  This is not working on my QIP 7216-1 DVR.  The SD Override is stuck in "stretch" mode and the regular menu won't turn it off even when I select 480p.  I'm thinking I need to set it in the box's set-up menu...

    dlovrien wrote:
    The instructions say "Power off the QIP receiver and then immediately press the MENU key on the front panel."  This is not working on my QIP 7216-1 DVR.  The SD Override is stuck in "stretch" mode and the regular menu won't turn it off even when I select 480p.  I'm thinking I need to set it in the box's set-up menu...
    The sequence was changed to POWER -> SELECT -> MENU.  Don't know why the manual hasn't been updated as this has been the sequence for some time now.
    If a forum member gives an answer you like, give them the Kudos they deserve. If a member gives you the answer to your question, mark the answer as Accepted Solution so others can see the solution to the problem.

  • How to set default podcast settings

    If I select a podcast and click on the settings button a dialog box come up. In this dialog box is a checkbox for "Use Default settings".
    Where do I set these default settings? I tired preferences but I could not find it there. So where do I set these settings that I want all Podcast to use?

    It's in the same little window as all the other defaults, the one you mentioned. Just go to the first one in the drop-down menu.

  • Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings

    Why do podcasts no longer auto-delete in new v10.6.3.25 on Dell laptop Win7 despite menu settings?
    tks

    Found the error and posted a blog post here: http://www.red-abstract.com/blog/2009/11/19/itunes-90-and-auto-deleting-podcasts .html
    The issue is that Apple put this behind another layer of configuration on the podcasts screen. Go to that screen and click "Settings." You will see there that you can configure the podcasts individually or set the defaults to remove played episodes. Only after setting this will iTunes honor to auto-delete.

  • My UI preferences are set to identical settings in Illustrator and InDesign, why don't they look the same?

    My UI preferences are set to identical settings in Illustrator and InDesign ("scale to lower supported scale factor") and AI looks perfect, ID is too big. Why don't they look the same if the settings are the same? Driving me CRAZY. I have my windows scaling factor at 124% and it needs to stay enlarged, otherwise nothing else on my system will be readable. The inconsistency of the workspaces is so annoying.

    Hello billwoodard11,
    Thanks for the question. If your computer is not compatible with HD 1080p content, you should receive a prompt stating so - but should still be able to download the content for use on other devices. For more information, check out this resource:
    Purchasing and viewing HD videos in iTunes - Apple Support
    http://support.apple.com/en-us/HT201850
    How to purchase, download, or view HD 1080p content
    iTunes 10.6 by default is set to purchase, download, and playback HD content in 720p. You must change your local preference setting if you prefer to download, purchase, and playback HD content in 1080p. Depending on your computer's hardware configurations, you may be unable to purchase, rent, or playback content in 1080p. iTunes may display the following dialog:
    On Mac or PC
    Download the latest version of iTunes. You can download iTunes for free.
    From the iTunes menu, choose iTunes > Preferences > Store (for PC, choose Edit > Preferences > Store).
    Next to "When downloading High Definition videos, prefer:" set your preference to 1080p1.
    Click OK. Now, when you purchase or download HD content, your computer will always download in 1080p, when available.
    Depending on your computer's hardware limitations, you may be unable to purchase, rent, or view HD content from the iTunes Store. If you are trying to view HD video on an external display, the display must have a digital connection (DVI, DisplayPort, or HDMI) and support HDCP.
    Check out the following resource for information on downloading past purchases, including information on playing purchases on Apple TV:
    Download past purchases - Apple Support
    http://support.apple.com/en-us/HT2519
    Thanks,
    Matt M.

  • ONKYO TX-SR805 Set-up Menu HELP Needed

    This is a LONG post, but I would appreciate if you would read it and respond to it.  The settings That are setup might not be the CORRECT settings.  If you think a different setting should be made, please let me know.
    Also right now I only have 2 front speakers (NHT VT-1A), 1 middle( NHT VT-1C), and a NHT SW12 Subwoofer.  I will be hooking up 2 or 4 more speakers for the REAR.
    Here are the settings on my TX-SR805 receiver on the set-up menu.  I could use some help to see if they need set to something else.
    2.2 Speaker Config
          Subwoofer       yes
          Front            70Hz
          Center          90Hz
    LPF of LFE        80Hz THX
    2.6 THX Audio Setup
           THX subwoofer  YES   I don't know if mine is or not
           BGC                    OFF  Not sure what this BGC means
    3. AUDIO ADJUST
    3.1  Tone Control
           Front    Bass      -1dB
                        Treble   +1dB
          Center  Base      +2dB
                        Treble   +7db
         Subwoofer Base  +7
    3.2 DIRECT
          Delay Enable
          DSD                NO   Not sure what DSD is 
    3.3 MULTIPLEX/MONO
          Multiplex
          Input CH       Main/Sub
          Mono
          Input CH         L+R
          Output Speaker  L/R
    3.4 PLIIx/Neo:6
            PLIIx Music   (2ch input)
            Panorama        ON
            Dimension       +1
            Center Width    3
    Neo: 6 Music
            Center Image   5
    3.5 DOLBY EX
            Dolby EX        AUTO
    3.6 THEATER-DIMENSIONAL
            Listening Angle   Narrow
    3.7 LFE LEVEL
            Dolby Digital      -10dB
            DTS                     -10dB
            Multich PCM      -10dB
            Dolby True HD   -10dB
            DTS-HD Master Audio  -10dB
            DSD                     -10dB
    4. SOURCE SETUP
           CABLE/SAT
    4.1  INTELLIVOLUME     +4Db
       .2 A/V SYNC            0 msec
       .3  NAME EDIT         Blank
    5.   LISTENING MODE PRESET
    5.1 DVD
           Analog/PCM      NOT SURE WHAT TO SET HERE
           Dolby Digital      NOT SURE WHAT TO PUT HERE
           NOT SURE WHAT TO PUT FOR ANY OF THESE LISTENING MODE PRESET
    5.8 TUNER (ANALOG)      Neural THX 5.1 is set on mine. Is this correct?
             CD                           ?
    6.  MISCELLANEOUS
    6. 1  VOLUME SETUP
              Volume Display              Relative
               Muting Level               -40dB
               Maximum Volume       +10dB
               Power on Volume        -22dB
               Headphone Level        +2dB
    6.2  OSD SETUP
               Immediate Display       OFF
               Monitor Type              16:9
               Display Position           TOP
    7.  HARDWARE SETUP
    7.4   ANALOG MULTICH
               Subwoofer Input Sensitivity    0
    7.5   HDMI
            ALL under here are     ENABLE
    Solved!
    Go to Solution.

    I gave you some answers in your original post. I wish you didn't start a new one. Here is what I posted.
    Re: ONKYO TX-SR805 Set-up HELP Needed[ New ]
    Options
    Mark as New
    Bookmark
    Subscribe
    Subscribe to RSS Feed
    Highlight
    Print
    Email to a Friend
    Report Inappropriate Content
    01-21-2010 08:24 AM
    Unfortunately this is very difficult because the top half of your post, your really the only one that can answer what the setup should be.  The adjustments are made based on the acoustics of your room and how everything sounds noone can really give you info on it because every house, and room has different acoustics.  The walls, insulation, carpet or bare floors, basement or main floor are just some examples of what can make a difference in sound reproduction.   By the way NHT (Now Hear This) are excellent speakers.  For bass and treble, the music I listen too requires a high treble content so I usually have it at 7 out of 10 but my bass is at 4 out of 10.   The sub base should be fine where it is.
    Did your receiver come with an Audessy mic for calibration.  I would use that for a basic setup and go from there I am not sure if on your unit it will do frequecy but I think it did.
    Your volume settings look fine again personal preference there is right or wrong.
    For you listening mode Preset  you should have an auto setting I am at work so it may take a coule of hours for me to get back to you as I have to go through your manual and see what you would set it up with so please bare with me. I will list the info as I read it so it may not be in the order you have it.
    I will have to make a second post since I can't go back and edit this one.

  • Cannot set custom print settings using mg6220

    Have just purchased a new iMac running 10.8.2 and Canon MG 6220.  Can print, but am not able to set custom print settings and see disclosure triangle in the Print Dialogue Window that I would click on to get to this option.  The instructions and illustrations in the manual are not the same as what I am seeing in my print window.

    Then I think you have selected the AirPrint driver rather than the MG6200 Series driver.
    So what you can do is open Print & Scan, select the current MG6220 in the Printers list and press the minus button to remove it. Then click on the plus button next to the minus button to add but if a little sub-menu window appears showing the MG6220 under the heading of Nearby Printers, as shown below with my MP990, do not select this.
    Instead, select the menu item that says Add Printer or Scanner. This will make the Default Add printer view appear. Here you should see the MG6220. Select it and if the Use menu shows AirPrint, click on this menu and select Canon MG6200 Series. Then click Add to complete. This should now give you the same Quality & Media menu that I have shown above.

  • How do I set my desktop settings so I can manually Move Folders?

    How do I set my Desktop settings so I can Manually MOVE the folders?

    Select
              View ▹ Show View Options
    from the Finder menu bar. In the dialog that opens, select
              Sort by: None

  • HT4972 I can,t find software update in my setting ,general menu.

    I can,t find software update in my setting, general menu ..only about then usage ..so how can I download ios5 ?

    If you have an iPad 1, the max iOS is 5.1.1. For newer iPads, the current iOS is 6.1.3. The Settings>General>Software Update only appears if you have iOS 5.0 or higher currently installed.
    iOS 5: Updating your device to iOS 5 or Later
    http://support.apple.com/kb/HT4972
    How to install iOS 6
    http://www.macworld.com/article/2010061/hands-on-with-ios-6-installation.html
    iOS: How to update your iPhone, iPad, or iPod touch
    http://support.apple.com/kb/HT4623
    If you are currently running an iOS lower than 5.0, connect the iPad to the computer, open iTunes. Then select the iPad under the Devices heading on the left, click on the Summary tab and then click on Check for Update.
    Tip - If connected to your computer, you may need to disable your firewall and anitvirus software temporarily.  Then download and install the iOS update. Be sure and backup your iPad before the iOS update. After you update an iPad (except iPad 1) to iOS 6.x, the next update can be installed via wifi (i.e., not connected to your computer).
    Tip 2 - If you're updating via wifi, place your iPad close to your router to preclude getting a corrupted download.
     Cheers, Tom

  • Preventing changes to TaskBar & Start Menu Settings

    Please tell me how to "prevent" changes to TaskBar and Start Menu Settings.  Is this mean the same thing as "pin" to Start Menu, need to know how to"prevent" the change.

    Hi,
    Refer below link too midify all the policies belongs to Start menu and Taskbar. ( Restrict users to set Pin to start menu)
    http://technet.microsoft.com/en-us/library/ee617162(v=ws.10).aspx
    Below link will guide you to how to restrict users to block start menu
    http://www.askvg.com/how-to-restrict-users-from-customizing-start-menu-or-start-screen-layout-in-windows/
    For Takbar-->
    \User Configuration\Administrative Templates\Start Menu & Taskbar
    Disable context menus for the taskbar
    Regards,
    Manjunath Sullad

  • I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. There are no page sizes, paper types, appearsto be locked on a 13x19 size but It.

    Hi to the Mac Folks,
    I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected.
    I primarily print photos from Photoshop CS5.  The term Page Set-up has gone missing in the file pull down menu. Can't make any choices  There are no page sizes, paper types, appearsto be locked on a 13x19 size paper format. Either being too large or too small.
    Saw a 2008 locked issue about this however none of the help fit my situation, options discussed are not available to me.
    Preview has no "Page Setup" - or does it?
    Does the constant struggle with computer compatability weirdness issues ever end or is it a enslavement scheme?
    Woody

    Hey,
    if you know the name(s) of the root folder(s) you want to access (eg. by making a note on the Windows side) then you can make them appear by just doing Shift-Command-G in Finder ("Go to Folder…"), and entering the full path to the required folders.  You can then navigate all the contents as normal.
    HTH,
    S.

  • How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my comput

    How do I set my firewall settings in Avasti to allow communications between my HP 8600 and my computer

    Something to Consider:
    If you are talking about "Avast!" Security Software, either the free or the paid version, the following may apply to you:
    There are three main levels of Security in the Avast! software:  Home, Work, and Public
    Home is the setting many people use when "at home", that is, connected to the home network.  The home network is sometimes defined as the "192.168" network:  these are the computers and printers that you have and use in your home environment.  The network is (most usually) private and (should be) secured with with a passphrase at your router.  The Avast! Software sees the "Home" network as a "safe" environment:  devices connected within the "Home" network are allowed to "talk" (communicate) with one another without undue restrictions.
    Work is the next setting.  The software places some restrictions on this level of communication.  Home users can certainly use this setting -- in many (most) cases, the "Work" setting is a solution that provides for communication and a bit more security for the home network and its devices.
    Public is the strictest setting and is meant to keep your computer safe in a public place:  the library, coffee shop, on a street corner.  Outside "prying eyes" are prevented from peeping and outside communications are restricted.
    If you have set (or left) your Avast! software set to Public, or even Work (and you do not know how to handle the restrictions), then you may have simply locked out the communication between the printer and the computer(s) on your home network.
    Open your Avast! Software and set the security level to either "Home" or "Work".
    You can find out more about how to use the software settings at the Avast! website.
    Advanced Users Only - You will  know if you changed the Rules... this is not something one does by accident.
    If you have changed the rules within the settings, you may have locked yourself out.  Make sure you have both "in" and "out" traffic settings adjusted correctly for each rule you change / adapt / add.
    Kind Regards,
    Dragon-Fur

  • Is it possible to give each page within one pdf document a specific set of print settings?

    I have a complex document (catalogue) that requires printing. There are several different printer settings required and each one is specific to each page within the document. For instance pg 1 is single sided in colour, page 2-3 is duplexed in b&w, page 3-8 is duplexed in colour, etc.... Is it possible to give each page within the pdf document a given set of print settings and then print the entire document as a whole?

    Hi jennyskop
    I assume that is not feasible ...You need to give the print command again and select the respective pages and their settings !

  • The sound doesn't work.  It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored and still no

    It's set appropriately in settings, the volume is turned up all the way with the side buttons, but no volume.  When we try to play songs, it acts like it's going to play and then goes back to the play list.  Restored the device and still no sound.

    Try A and B
    (A) Restart iPad
    1. Hold down the Sleep/Wake button until the red slider appears.
    2. Drag the slider to turn off iPad.
    3. Turn iPad back on, hold down the Sleep/Wake until the Apple logo appears
    (B) Reset iPad
    Hold down the Sleep/Wake button and the Home button at the same time for at least ten seconds, until the Apple logo appears
    Note: Data will not be affected.

  • I want to set default printer settings to be used only for a specific type of application, certain documents. All other print jobs should use a different default setting for the printer.

    I am printing a specific document from a web based application. This document need to be printed in landscape. So I would like to set the default settings for this specific printer to landscape. But for all other printers it should be portrait. But this does not seem to work. The browser picks the settings from the standard/default printer and uses this for all print jobs.

    Embie wrote:
    I was told by support that my problem was a hardware problem and that HP would not replace the faulty hardware.  Great.  I will replace my faulty hardware manufacturer.  Simple, HP never again.
    In the hour since you have registered you have posted seven messages, none of which contain any useful information that would allow someone here to help you.  Please read this post then provide some details in a new thread.  What printer model? What operating system? How is the printer connected - USB, wired LAN, Wireless LAN, bluetooth?  What is the problem you are having (with the printer...)?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

Maybe you are looking for