SUBSTITUTE Function and Quotation Marks

How do you substitute another character for a quotation mark in a string using the SUBSTITUTE function? I want to change a string such as 12"x12"x2" to read 12x12x2. I have read the User Guide and the Formulas and Functions User Guide, but I cannot find a way to 'escape' the quotation mark so that it is interpreted literally. I tried the tilde, but that did not work either; and smart quotes is turned off. My UNIX skills are rusty. Is this possible in Numbers '09?

Thank you very much! I had tried 3 quotes, but did not think to try 4 quotes; nor did I think of Googling an Excel solution. The logic of why this works escapes me, but it DOES work and I will have to remember this tip as well as how you found the solution. Again, thank you for providing a solution.

Similar Messages

How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Dear all:
I have a wifi roruter with SSID test "3"
But when I execute following command netsh wlan connect "test \"3\""
the netsh reply: 未將設定檔 "test " 指派給指定的介面。
Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
test, not test "3".
Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
Regards,
Joseph

Hi Joseph,
Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
Therefore, I would like to suggest you run command as this syntax:
netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
To do this, please refer to the section “connect” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Karen Hu
TechNet Community Support

Question Mark and Quotation Marks Stopped Working

Hi, I was working away and then my computer just up and restarted. I then relaunched my application now I notice my quotation marks, and question marks dont work in any application, but they are replaced by these letters: Double Quotation is: È, Single Quotation is: è and Question mark is: É.
I opened my System Preferences and reset the keyboard to default and the quotations and question marks still dont work. I know I have had memory problems but what can I do to fix this.
Thanks

Paint Guy,
What keyboards do you have selected in System Preferences>International>Keyboards? Make sure that US is at the top of the list and uncheck any unwanted keyboard inputs. It sounds as if you might have Canadian input selected.
littleshoulders

Typographically correct apostrophes and quotation marks? Bug?

I am using the trial of Pages '08 (3.0) on a German Mac OS-X 10.4.10. Typographic quotation marks are switched on.
Apostrophe:
Whenever I type a phrase in English with an apostrophe, for instance the word "Let's" it uses a left single quotation mark (‘) instead of the right single quotation mark.
Quotation marks and languages:
Likewise, with typographic quotation marks set in the program settings, Pages uses the German quotation marks (which look like this: „word‟) although the text language is set to English. This behaviour occurs with English and English, GB. In Word this behaviour changes with the text language setting.
I am a recent switcher, so maybe a solution to this problem is already known. If not, should I report this as a bug via feedback?

Ian, yes, that would be Smart Quotes in English.
You not being able to get German quotation marks in English would seem to be the same problem. I guess this is a bug then (or a missing feature) as I would expect this to change with each language (e.g. French has guillemots etc.).
Would perhaps having several keyboard input setup in OS-X help here?
Thanks for the link to Tom Gewecke's page. Tom, I'd be interested to hear of any other good recommendations. Are NeoOffice/OpenOffice good in this respect? Word compatibility and the ability to track changes is a must for me (as client's work with Office), but I'd rather invest in Microsoft Office when the new Universal version becomes available? I like the more simplified interface of Pages, which is why I'm trying the new version out via the trial.

Grep and quotation marks

Hi, I have put together a grep style that will change any western characters in a Chinese document to a different font. I am having a problem with changing quotation marks around western characters without changing the ones around Chinese text as well. Is there any way to change only quotation marks that are around western characters?
Kate

Sure! It's perfectly possible to scan for anything but Chinese. What exactly do you have now? If you are using something like
".+"
you could change it to
"([\x{0003}-\x{2fff}]+"
(the main bulk of Chinese starts at Unicode u+3000). This will include the text "within". An alternative way, excluding anything but the quote marks themselves, is to use lookbehind and lookahead:
(?<![\x{2fff}-\x{faff}])[~{~}](?![\x{2fff}-\x{faff}])
This may look daunting, but it consist of three fairly easy parts:
(?<! [ \x{2fff}-\x{faff} ] ) Match behind for not anything in the Chinese range
[ ~{ ~} ] Match either opening or closing double quote (this doesn't seem to work with the " any dbl quote wildcard...)
(?! [ \x{2fff}-\x{faff} ] ) Match in front for not anything in the Chinese range again.

Builder and quotation marks

Since we don't need the quotation marks, why does the builder build using them????
I'm trying to write the source by hand, and I use the builder to learn from.
But any source that's been generated has all that excess stuff in it, so I have to go in and edit it out.
Is there a toggle to turn that off?
Marion

This is primarily in support of object names using non-ascii characters. I believe table names can only contain A-Z 0-9 _ without using quotes around them. So, if you were French and wanted to create an employees table:
CREATE TABLE EMPLOYÉS(ID NUMBER);
CREATE TABLE EMPLOYÉS(ID NUMBER)
ERROR at line 1:
ORA-00911: invalid characterWith quotes:
CREATE TABLE "EMPLOYÉS"(ID NUMBER);
Table created.Since APEX is supported 9 languages in addition to English, they have to expect they will encounter this issue when querying these tables as well. So, to be safe everything is enclosed in quotes. Quotes also support mixed case object names, but that is terrible, terrible path to go down. If anyone reading this that uses Oracle in another language cares to chime-in and correct / supplement my response, feel free.
Tyler Muth
http://tylermuth.wordpress.com
[Applied Oracle Security: Developing Secure Database and Middleware Environments|http://www.amazon.com/gp/product/0071613706?ie=UTF8&tag=tylsblo-20&linkCode=as2&camp=1789&creative=9325&creativeASIN=0071613706]

Apstrophes and quotation marks

I have a text containing dialogue with a large number of word-initial apostrophes to indicate dropped h's (e.g. I 'ope, 'e 'as, etc). Because it's dialogue, there are also a large number of quotation marks and I want to use typographer's quotes. Is there a way of doing this without InDesign (CS5) automatically converting the apostrophes to opening single quotes.
Thanks for any advice,
Piers

Thanks Jongware and Peter. Used the Grep solution to do the bulk of it and then went through the text and manually changed back any opening quotes that had been incorrectly converted to apostrophes. The text was imported from a Word document. I feel the need for some kind of 'hard' apostrophe that never gets changed by smart quotes!
Thanks again for your help,
Piers

Numbers' Functions and Formulas in Multiple Cells, Tables, and Sheets

Hello,
I'm stuck with specifics that center around usage, and I get the funny feeling I'm overlooking a simple detail or two.
If I may, here goes.
I'm working with a single spreadsheet that has several sheets within it, and each sheet has an identical table. Each table is used to record various data, and I use an additional table in a separate sheet to consolidate some of the information, so that I can track results, at a glimpse, by looking at averages, totals, etc.
Each data table is organized for consolidation by tracking wins, ties, or losses. It is important to know that each data table only records a single win, tie, or loss along with its other applicable data. And on the actual consolidation table I am trying to tally specific data fields by the use of Numbers' functions and formulas, yet I wish to keep these tallied results organized by the determining factor of whether or not they were gathered from a table that recorded a win, a table that recorded a tie, or a table with a loss.
To illustrate, each table contains data fields that record start time, finish time, elapsed time, the day of the week, etc. Let's say I have eight tables, and the first two are winning tables, three more are tables that record a tie, and the last three are losing tables. For example, on my consolidated data table I wish to enter a function and formula capturing which of the eight tables are wins, ties, and losses so that I can, at a glance, see how much time elapsed to obtain the wins, ties, and losses. So then, in this example, for wins I want to determine which of those wins took 20 minutes, or which of them took 15 minutes, etc. So then, out of the two wins, let's say both of them took 20 minutes each. I need the numeral 2 to be counted and recorded on the consolidation table since only two tables match the criteria. And I would do the same for all remaining data fields (e.g., start time, finish time, etc.). Just so long as everything is determined by wins, ties, and losses, and then organized by the respective data fields. Simply put, this example determines a total of two wins that meet the data field requirement of 20 minutes. Out of the eight tables (one table per sheet) any other wins would then be organized according to the specific data in the elapsed time data field on it's data table (e.g., 5 minutes, 15 minutes, etc.).
The exact syntax structure of the functions and formula I'm unsuccessfully using follows below. It only seems to return a result of 1, and I think it is returning this value from the IF Statements. By the way, the Win, Tie, or Loss cell in each data table is cell formatted as a pop-up so I can either select None or 1. But in this example I'm basing this on the time period of 20 minutes, and out of the eight data tables I have two wins which also record the time period as 20 minutes, so I should see 2 and not 1 in the 20 minutes column of the consolidated data table. Also, I tried changing the syntax where I would type "=1" in the IF Statements, but it returned a result of =1, and if I don't include the equals sign and quotation marks the result just shows up as 1.
My Syntax:
IF(Trade 1::'Data Recorded (1)' '* Win', 1, IF(Trade 2::'Data Recorded (1)' '* Win',1, IF(Trade 3::'Data Recorded (1)' '* Win',1, IF(Trade 4::'Data Recorded (1)' '* Win',1, IF(Trade 5::'Data Recorded (1)' '* Win',1, IF(Trade 6::'Data Recorded (1)' '* Win',1, IF(Trade 7::'Data Recorded (1)' '* Win',1, IF(Trade 8::'Data Recorded (1)' '* Win',1, IF(COUNTIFS(Trade 1::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 2::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 3::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 4::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 5::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 6::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 7::'Data Recorded (1)' '* Time in Trade (in minutes)', "=20m")+COUNTIFS(Trade 8::'Data Recorded (1)' '* Time in Trade (in minutes)'))))))))))
Please bear in mind that the COUNTIFS portion of the above syntax structure is something I'm already successfully using to count the totals of other things not mentioned above, and I'm hesitant to delete it since it already works to my satisfaction when I want to, for example, determine the total number of overall wins. So, just for illustration purposes, I might have an overall wins column in my consolidation table that records how many wins there are, regardless of organization by elapsed time, or any other data field. In other words, the COUNTIFS syntax structure already works to my satisfaction. I'm not sure if it's possible to alter it so that it isn't so long, but what's there does work just when counting total numbers, as just mentioned.
In summary, I'm wondering which function I can use with the COUNTIFS function to determine which of my eight data tables are winning tables, but break those wins down further based on criteria like elapsed time, and in the above example the time elapsed is 20 minutes. As you may see above, I'm unsuccessfully using the IF function. Finally, I've looked at the function browser descriptions of things like LOOKUP, HLOOKUP, VLOOKUP, INTERSECT.RANGES, and a few others. And so far I haven't made good use of any of them the way I've done when I use the COUNTIFS function by itself when only counting overall totals. But now I must determine totals that meet certain criteria, as explained above.
Please help if you dare (smile). This is a huge project I'm undertaking, and so as not to cause confusion I have not included all of the details. But rather, I've taken a small sampling and set it to the side for experimentation. If this small sample works out to my satisfaction I can simply copy and paste the syntax in all other respective cells in the consolidation table, changing only reference locations, and perhaps conditions or values. One thing is certain, I don't intend on giving up on it.
Thank you for your time and advice.
Blessings!
Message was edited by: solo68
Added image.

I'd like to edit the last paragraph of my second posting, but for some reason an entirely new posting is being created when I attempt to do this. So when reading this post, please use it to replace only the last paragraph of my second post containing the four inserted images.
Last paragraph begins:
In closing, I need each cell in each column of each row in my consolidation table to remain as is. I have my reasons for doing this, and they all serve a specific purpose. The only exception would be the formatting of the last three rows as footer rows. Most importantly, and I should have made this abundantly clear earlier, my apologies, I need a single function and formula in cell E7 of my consolidation table that will firstly determine which data tables are winning tables while secondly and simultaneously counting which of those winning tables have elapsed times of 20 minutes. Perhaps, now this better explains why my syntax is written the way it is written. In the example I provided, if the proper function and formula were written it would result as 2 in cell E7 in my consolidation table. If there is anything else specific you need of me in order to assist me, please request it. Thank you.
Last paragraph ends:
Additionally, to t quinn:
First off, thank you for returning to assist me. I really do appreciate your efforts. Please be aware that I'm avoiding going into details about each and every portion of my spreadsheet because I wish to avoid discussion that is off topic. As I stated earlier, I'm new to using these features of Numbers. My spreadsheet encompasses a much larger amount of data than I'm referring to in the example in my first post. But in my example I'm isolating just the information concerning what I'm now trying to accomplish to finish my spreadsheet project. Moreover, most of what I've done up to this point I was able to figure out on my own, or get help from watching videos on YouTube, or simply using the application help menu. Please be aware that I consulted all of these, repeatedly. I even contacted AppleCare, and was told this sort of support is not available. In spite of this, I've accomplished a great deal in my first large spreadsheet project. Please be aware that when I wrote my second post and specifically responded to you, I didn't want to be rude or ungrateful, and I still don't, but maybe the suggestions you and Hiroto made about gathering the count of wins, ties, and losses are something I've already done. I think I've done that separately. These counts are already in separate cells, and they are working fine. In my first post where I inserted only one image you can see examples of this in my consolidation table image, in cells B3 and E6. I apologize for not making this abundantly clear earlier. Furthermore, the portion of my syntax that shows the COUNTIFS is the exact way I accomplished this, and it is written the way it is written because I need separate sheets, each with their own data tables. Again, in cell E7 I need to determine which of the eight data tables that record wins are also recording 20 minutes, but I need this in a single function and formula with the result appearing only in cell E7. Once this is figured out I will adjust the syntax to do the same thing with every column (these are not shown but they exist) in my consolidation table for the last three footer rows, named Win Column Totals, Tie Column Totals, and Loss Column Totals. The last three rows being footer rows may not be necessary, and if so, I can convert them back to normal rows. Nonetheless, my consolidation table is counting the totals of all data in all data tables. This much I've already accomplished. Now I have one last function and formula I'm working on in order to determine which of the eight data tables record wins, ties, or losses while it simultaneously counts which of the wins, ties, or losses fall within certain categories like elapsed time, and this will be shown on my consolidation table only in the last three rows. Yes, I've gotten the total wins counted, and separately counted the total number of times 20 minutes was the elapsed time used, but so far, just looking at my consolidation table I don't know if the total number of times 20 minutes was used was with a win, tie, or loss. That's what I need to know now. Everything else is already accomplished. So then my consolidation table will show the totals for all data fields in my eight data tables as illustrated in cells B3 and E6. The last three rows of my consolidation table will break this down in a single function and formula with one row for wins, a second for ties, and a third for losses. And each of these respective last three rows will in the same function and formula determine if the win, tie, or loss also is one of the data fields in my eight data tables. How? By the use of columns in my consolidation table. Remember, each of my eight data tables are identical. In the example in my first post I only used one data field, elapsed time (Time in Trade), to illustrate in one column on my consolidation table what I'm trying to accomplish with all of the columns not shown in my consolidation table. Once this is figured out I can adjust it to complete the remainder of the consolidation table. Thank you, t quinn.
To all reading this and attempting to offer assistance, if for any reason I'm still not explaining myself clearly, please continue to ask me more specific questions. I realize it's hard to communicate this way, and if Apple allowed us to upload the actual spreadsheet it would make this entire forum a better place to communicate. But that's going off topic, so let's simply focus on the matter at hand. Thank you.
Blessings!

When I write in hebrew from right to left the periods/quotation marks/question marks at end of sentences jump to the beginning of the sentence. help

I cannot seem to format a message correctly when I write in hebrew from right to left
even if I press left margin and the message starts from the left side, all question marks, and end of sentences (periods, etc) jump to the front of the sentence and quotation marks or separation marks (such as dashes) split up the lines and jump words to the front of the sentence.
how can I change the formatting to solve this so the recipient receives a properly formatted email?

are you using in bidi add-on?
https://addons.mozilla.org/en-US/thunderbird/addon/bidi-mail-ui/

Apostrophes, quotation marks, dashes causing problems in emails

MacBook Pro
OS: 10.4.7
Program: Mail
Since upgrading to an Intel MacBook Pro (10.4.7), my outbound email has been turning into a weird jumble of glyphs.
For some recipients, my apostrophes and quotation marks turn into a serious of four glyphs...for other recipients, all the dashes and em dashes disappear...for yet other recipients, all the punctuation completely vaporizes.
I’m emailing to an extremely broad set of recipients, as they are my customers from all over the country. No single ISP is in common, no particular browser, etc. The only reason I even know about this is because I’m able to see the catastrophe in my original text included in their responses. Doesn’t matter whether I’m sending from home (with our cable company ISP) or from work (an entirely different cable company ISP)...same mess either way.
Our outbound messages are nearly incomprehensible to read—any suggestions?
MacBook Pro, G4 PowerBook, G4 tower Mac OS X (10.4.7)

The only reason I even know about this is
because I’m able to see the catastrophe in my
original text included in their responses.
That doesn't necessarily mean that your outbound mail is appearing strange to the reader. I would advise you to check that and verify that you really have a problem.
If your readers do see strange characters, it is often because you are sending rich text (which is really html mail) and they are using MS Outlook. Some possible fixes are in this note:
http://homepage.mac.com/thgewecke/woutlook.html
PS Getting rid of all smart punctuation (curly quotes and apostrophe's, special dashes) may also be helpful.

Question marks appear in my browsers now, used as quotation marks...

Lately all sorts of question marks are appearing in certian parts of my browsers, I think that somehow a font is corrupted or something... it appears they are there appostrophies and quotations marks should be; this is very annoying. How can I fix this? As far as I know, I havent done anything with my fonts or to my system.
Thanks
Michael

It would help a great deal if you would provide an example url of a site where you have this problem.
Normally seeing ? instead of punctuation is caused by an encoding mismatch between the browser and the page being viewed, resulting from errors by the page author. You can often fix it by going to View > Text Encoding and manually setting your browser to Western (ISO Latin 1).

How to mark product mandatory in SAP CRM Opprotunity and Quotation?

Hello All,
We are using SAP CRM 4.0 and have one requirement as follows:
Through Configuration ,I am not able to find the the way to mark mandatory for the fields Product , Description,Quantity,Exp.total Value under the Products Tab for the Opportunity. Also the field product under products Tab for the Quotation.
Can this be done through Config or Technically? please provide the steps for the needful and also advise do i need to put this at header or item level?
Thanks in advance.
Cheers
Sreedhar

Hi, Sreedhar
You have to write program for Badi ORDER_SAVE or use incompleteness check.
How to maintain the fields mandatory in Opportunity and quotation SAP CRM?
making activity reason as incompleteness field
Denis.

Quotation marks and apostophes reversed

When editing text, I'm getting reversed quotation marks and apostophes if they are added to preexisting test. Quotation mark added to the end of a sentence that was already in the document will be pointed the wrong way. Erasing the last letter and retyping it with the quotation mark will perform correctly.
The same happens when placing an apostophe on preexisting text.
This happens in AppleWorks, TextEdit, and Tex-Edit Plus. This does NOT happen in Pages or InDesign. It only happens on one of my computers.
Any ideas?
Ric Carter

Hello
This may be due to a corruption of preferences files dedicated to the named applications.
Try to trash these preferences files.
It may also be due to corruption of some documents but I assumes that if it was specific to only some docs you had wrote this detail.
Some system preferences may be corrupted too but I assumes that if one of them is corrupted, the corruption would strike on every applications on a single computer.
Yvan KOENIG (from FRANCE jeudi 24 mai 2007 19:04:45)

Getting Quotation Marks to look like they were mirrored. In GREP or Regular find and change

Hello,
Is there anyway to make quotation marks come out like this image below.
Right now I have 2 text boxes to make it work, as I cannot get the first double quote to look like a mirrored version of the right double quote ;-(
This is what it needs to look like.
Thanks,
Babs

Peter wrote:
When you copy someone else's copy of Sgt. Pepper you deprive the distibutor of his profit on the legitimate sale and you deprive Mssrs Mc Cartney and Starr of their rightful royalties, which may be piddling, but every little bit counts.
Little bits do not count for as much as great big bits, and it is rule-worship to assume that they do. There is no proportionality in grouping very different sorts of violation together as if they were all in the same league of criminality. Picking up a dime someone has dropped in the street is completely different from breaking into someone's house and stealing a large quantity of money.
You'd have a fit if you found out I was using a logo you designed, without permission, and was making money from publishing it. Suppose I hacked into your system and copied your last completed job and handed it to your client before you could deliver and bill them? Would you be upset if they went ahead and used your work and didn't bother to pay you because, after all, there was no 'property' involved and they have what they need without cost?
Yes, I would regard that as a serious legal offense, and would follow it up with the full rigors of the law. But it is not "theft" in the proper sense of the word, in my opinion, because an idea (design, logo, etc.) is a type rather than a physical token. Its authorship must be protected, its origination acknowledged, monetarily rewarded, and all that, but the idea that it has an "owner" is the product of philosophical and logical confusion.
Human tend to over-extend the concept of ownership to all sorts of things that cannot legitimately be owned, such as other people. Even nowadays, following the abolition of slavery, many people consider themselves the owners of their spouses, children, employees, pets, etc..
Message was edited by: Jeremy bowmangraphics
PS: Forgot to add that I have paid for Sgt. Pepper four times already -- in mono vinyl, stereo vinyl, tape cassette, and CD. Don't you think it's time we all deserved an "upgrade"?

Adding a Kerning amount to the space between a digit and a quotation mark in GREP

Hello,
For some reason I am having a problem adding a Kerning amount between a digit and the Quotation mark in GREP.. Here is what I have :
(?<=\d)\x{0022}
I think the problem, is the character style lets me add a tracking amount, but not specify a kerning amount and that is what I really need. I just need a 150 Kern between the digit (sometimes a whole number or a fraction and the double quotation mark.
Anyone out there know a good way to do this?
thanks
babs

Almost right.
No, you cannot set kerning in a character style (easily -- I think there was a trick to work around it, but I cannot recall what it was). Yep, you must apply tracking with the GREP style to part of the string. If you set the tracking for both characters, it will also be applied to the second one, making this wider as well.
Set your GREP to this to prevent it:
\d(?=~")
(where the code ~" is equal to 'straight double quotes only').

SUBSTITUTE Function and Quotation Marks

Similar Messages

Maybe you are looking for