How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Dear all:
I have a wifi roruter with SSID test "3"
But when I execute following command netsh wlan connect "test \"3\""
the netsh reply: 未將設定檔 "test " 指派給指定的介面。
Sorry my windows7 is chinese version, but as you can see, netsh detect my SSID as
test, not test "3".
Does everybody know how to use netsh to connect to a SSID, and these SSID has space and quotation mark both?
Regards,
Joseph

Hi Joseph,
Firstly, please modify your SSID name to make sure it do not contain spaces or special characters. SSID name is the router setting. please go there to change SSID name.
In addition, If only one SSID is specified in the profile, then the specified SSID is used to connect, and the ssid parameter is not required. If the profile specifies multiple SSIDs, the ssid parameter is required.
Therefore, I would like to suggest you run command as this syntax:
netsh wlan conncet ssid=Your SSID of the unsecured wireless network name=Your current profile name
To do this, please refer to the section “connect” in the following document:
Netsh Commands for Wireless Local Area Network (WLAN) Preliminary
http://technet.microsoft.com/en-us/library/cc755301.aspx#bkmk_wlanConn
Karen Hu
TechNet Community Support

Similar Messages

802.1x Win7 Popup box - Netsh wlan connect - VBscript

Hello,
Is there a way to programatically pop up the sign in/authentication box for a user who connects to a 802.1x access point via NetSh?
The "netsh wlan connect name=<profile name>" command works great for kicking off the connection from a vbscript. I'd just like to put a little polish on the process by poping up the actual authentication box for the user. That way I
can avoid having to rely on the user to manually click the popup message from the sys tray.
A lot of information and walk throughs have been published on how to find the and use the popup message box. I wonder if anyone else has had any luck with this subject or not. Perhaps if I could find the name of the application that runs the popup
I could grant it focus and force the popup.
Any tricks or advice is appreciated.

The answer depends on how the user is running the Netsh command. I get an automatic authentication popup on Win7 by placing the Netsh command in a batch file, and then by running the batch from from a VBS using the RunAs argument of ShellExecute function.
This may be a little late to help you, but someone else may benefit from it. Here's an example:
Filename: OpenHailingFrequency.vbs
Dim Args
Args="/c {Drive}:{\pathToBatchFile}\openHailingFrequency.bat"
Set oApp=CreateObject("Shell.Application")
oApp.ShellExecute "cmd", Args, , "runas", 1
#Filename: OpenHailingFrequency.bat
@echo off
netsh wlan connect name=MyWirelessConnectionName interface="MyInterfaceName"
I simply create a desktop or menu shortcut to OpenHailingFrequency.vbs. It opens a DOS cmd window and runs the batch file, requesting permission first.

1.5,,, I had this before and forgot how to fix it,,, playback is silent, but scrubbing has sound,

how can I fix this?
1.5,,, I had this before and forgot how to fix it,,, playback is silent, but scrubbing has sound,

This forum is for CS5 and later, so you probably should ask in http://forums.adobe.com/community/premiere/premierepro_previous?view=all where someone may still be using that very old version
When you go there, you need to post the information asked for in the Information FAQ http://forums.adobe.com/message/4200840

I'm trying to install xCode, and it asked me to quit itunes. But itunes has quit and the installation has stopped. how do i fix it.

it asked me to quit itunes. But itunes has quit and the installation has stopped at the instalation alert for itunes. how do i fix it.

Okay i just figured out how to fix it. all i did was go to my Activity Monitor and searched all processes for itunes, itunes helper was running. i just quit it and intaller.app was just fine. thanks thou, ill give you the points for trying to help me.

"Device connected to USB port has malfunctioned and is not recognized"

When I hooked my nano up to my computer today, the screen went black with a silver apple icon on it...it's still all lite up and on...but it won't change from that screen.
And my computer says, "Device connected to USB port has malfunctioned and is not recognized", so it won't show up in iTunes.
What do I do?? Thanks.
Windows

iPod appears in Windows Explorer but does not appear in iTunes.
iPod does not appear in iTunes.
Fast user switching in Windows XP is not supported.
Strange iPod behavior.

How can i delete movies from my macboook to make space and keep them on icloud?

How can i delete movies from my macboook to make space and keep them on icloud?

Since iTunes Match nor iCloud supports storing video content at this time (other than music videos purchased from the iTunes Store) what you want to do is not possible. There may be other cloud storage solutions out there, but none that integrate with iTunes.
FYI, if any of the movies are purchased from the iTunes Store the service Apple calls iTunes in the Cloud by be a partial solution for you. However it is strongly recommended that keep a local backup of all your purchased media and not depend solely on a third party (Apple) to keep your data safe.

I am trying to open my macbook air but it has blocked and it makes a beep sound.

I am trying to open my macbook air but it has blocked and it makes a beep sound. It wont turn on. Is there something i can do?

Assuming this is not the normal startup chime, one beep means no RAM...so something in the path to the RAM has failed.
Best option is the Apple store genius bar to have the techs test the system and see what is going wrong.

How can I find out those files whose name has space character?

Hi
How can I find out the files whose name has space character in a whole file system?
Thanks
Jerry

thank you all
I can use this command to find out like
$find ./ -type f -exec ls -1 {} \; 2>/dev/null | grep " "
./space in name
while, I modify above a little to find out a spcific file systems like below:
$find /bbj* -type f -exec ls -1 {} \; 2>/dev/null | grep " "
/bbj14/appl/oracle/prdrep/S_STATIC_TAB_05.dbf
--while, I didn't see any space character in file name "S_STATIC_TAB_05.dbf"
what is wrong?
thanks

How to play Netflix on my Imac G5, it has Safari and Firefox 3, and over 1gb Ram and Mac OS X 10.4.11

How to play Netflix on my Imac G5, it has Safari and Firefox 3, and over 1gb Ram and Mac OS X 10.4.11

You referenced that you had a iMac G5 model?
G5's are PowerPC CPUs and not Intel CPUs.
The Microsoft Silverlight software works with Intel chip Macs only.
And, if I am not mistaken, the software requires OS X 10.5.8 Leopard or greater to install.
So, you need both an Intel Mac with, at least, OS X 10.5.8 as minimum requirements.
Netflix will still not work on your Mac.
FYI.

I have CC Indesign CS6, but client has CS3 and wants CS3 files.

I have CC Indesign CS6, but client has CS3 and wants CS3 files. Can I access earlier versions through CC to do the 'downsave' thing? Any workarounds?

You're a bit of a bind.
To save backwards you need to File>Export and choose IDML
But you will need to find someone with InDesign CS4 or CS5 as that is the versions that will allow to File>Export and choose INX.
INX is the only version that can be opened in CS3.
To be clear - the client should really update to the same version as you - as with each version the text engines are different, so there will be different line endings and perhaps even overset text depending on the layouts etc.
Plus any new feature in CS6 that was not in Cs5.5 or earlier versions will be stripped out - and going back to CS3 there are a few things which could alter the layout significantly.
I suggest the client upgrade to the latest version. Or if you can find a CS3 version online to purchase for yourself - either way - you should both work on the same version of the software.

I purchased and downloded Lion OS for my apple macbook pro but nothing has changed and no idea why.

I purchased and downloded Lion OS for my apple macbook pro but nothing has changed and no idea why.

I believe I did that too, in my about this mac it says my software is now Mac OS X Lion 10.7.3 but no features have changed.

How to close 5800 wlan connection that's "already ...

plz help me with my nokia 5800Xm with this error: WLAN CONNECTION ALREADY ACTIVE, close it and try it again.. what should I do?? HELP ME..
5800xm
version : 21.0.025
where do i disconnect that unknown running WLAN connection
edit: topic added.
Message Edited by vandelay on 11-Aug-2009 11:17 AM

I fixed this problem yesterday it's so simple
1-you need to back up you device
2-remove the memory card
3- switch off the device
4- it's kinda tricky but you need two people to do this press the red,green,camera and power button
if you do it correctly you will feel vibration and then it will start once again .
And there you have it hope this information was useful

C3-00 Wlan Connection Failed (but not before)

Hi!
I bought a C3-00 today, at the begining, I could connect on my access point, but after charging my Nokia, I could'nt attach to the access point. This message appears now: "Wlan Connection Failed". I read some stuff about firmware update but I can't update my firmware because the 7th version is not available in my region (I'm belgian).
Someone have an idea of the problem?
Thanks.
Edit:
My router is a Bbox2 (Belgacom Box)
Edit2:
I've just try and it's work, it pretty weird. Do you thing problem comes from my router?

Hi babyhedgehog,
Thank you for your post and welcome to the forums!
The security code is tied to the phone, not your SIM card. So, we would advice you to soft reset your phone again and try the default security code, which is 12345.
If restoring factory settings does not resolve your issue, you can also try to hard reset your phone. This will remove all settings and personal data from your phone, so we recommend that you first back up your phone with Nokia Suite.
To hard reset your phone, just dial *#7370#.
Let us know if this helps,
Puigchild
If you find this post helpful, a click upon the white star at bottom would always be appreciated.
If it also solves your problem, clicking ACCEPT AS SOLUTION below it will benefit other users!

[LV - TS] How to execute a SEQ file, get the result (PASS/FAIL) and the report file ?

Hello,
I'm looking for the most obvious and simple way to, from Labview :
1- Start the Teststand engine : DONE
2- Get a list of SEQ files to execute : DONE
3- Loop through the list to execute each SEQ file : <- found some examples but I have some trouble with the UIMessage stuff
http://zone.ni.com/reference/en-XX/help/370052N-01/tsexamples/infotopics/executing_sequences_using_api_labview/
4- Get the result of the SEQ execution : <- unsure
5- Get the XML path+name of the report file generated : <- obviously not easy
http://digital.ni.com/public.nsf/allkb/3D3B2358DF9B786B8625789500549A3B
http://forums.ni.com/t5/NI-TestStand/Getting-Report-File-Path-location-at-execution-in-TestStand-2012/td-p/3041789
Here is my current implementation :
David Koch

Hello,
I tried to work from this example :
http://forums.ni.com/t5/NI-TestStand/Execution-of-TestStand-Sequence-in-LabVIEW-via-TS-API-Different/td-p/2939616/page/2#M46686
However it remains unclear about how to get a simple
answer from just running a sequence file out of any
model so far (Simple Pass). Like I told you, all what
I need, once the TS engine is started, is a VI with the
following interface :
INPUT
1- TS engine reference
2- SEQ file path (path or string)
3- Sequence name to execute
4- UUT string (optional, but yeah)
5- error in
OUTPUT
1- Result boolean (PASS/FAIL)
2- Path to XML report
3- error out
It would be so cool to just have this
About the surrounding UI, I'm working on it. The LV
code is not really important at this point, it's running
a SEQ file that matters to me.
David Koch

How can I resolve bluetooth connectivity issues between my iPhone 4S and my car?

My iPhone contantly unpairs from my car's bluetooth while I'm on a call. The phone is still working and I can continue the conversation if I hold it, but that is illegal in New Jersey. I have tried re-setting the iPhone, and re-pairing it with the car's bluetooth, but nothing has worked. My car (Lexus 350RX, 2012) is up to date with firmware. My daughter has the same issue with her iPhone 4S and her Honda Pilot. I may have to get a Samsum Galaxy if this issue is not resolved.

either export it as a pdf if you dont need to work in it or if you do use an app called numbers from apple it supports excel as far as i know

How to execute "netsh wlan connect SSID", but SSID has space and quotation marks?

Similar Messages

Maybe you are looking for