The extrude effect on my text goes away when brought from After Effects to Premiere since I updated to 2014 CC. Help?

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

Hey everyone,
Ever since I have updated from my CC to the CC 2014 last night, My extruded 3D ray traced texts become CLASSIC 3D texts when brought to Premiere from After Effects. Has anyone else experienced this problem yet or have any possible solutions? I appreciate it, Thanks!

Similar Messages

  • 16:9 video sides cut off when exported from After Effects

    When I export a 16:9 video from After Effects, the sides are cut off in the exported clip.  I've tried different export settings and and my composition settings are correct, from what I can tell. Does anyone know why this could be happening?
    Thanks!

    and my composition settings are correct, from what I can tell.
    But are they really? We cannot know, because you don't say anything about your exact render settings and comp settings, which is what is required here. You could be using an unsuitable CoDec or even crop your output inadvertently by using a specific output module setting....
    Mylenium

  • Media Encoder goes away when launched from Prem-3.2 CS3 (help !)

    Need help fixing Adobe Media Encoder - Dies after launching from Pre-Pro cs3 v 3.2 Vista Platform.
    Very short clip. Just goes away.. no messages. I've gave it time to "soak"... 15 minutes - source clip is only minutes long.
    The only way to recover Premere is to kill VIA task manager and re-start.
    I've reinstalled CS3 master collection from scratch - all Adobe products have all the latest patches/updates applied.
    I've appiled the latest Vista Updates and the OS is current.
    I HAVE to fix this any idea's what going on here ?
    PLEASE PLEASE help.. and let me thank you in advance for your efforts.

    Robert,
    Welcome to the forum. While it might not yield even a clue, their might be a bit of a "trail" on the crashing of AME. Take a look at this ARTICLE, and see if you can locate any useful clue.
    Good luck,
    Hunt

  • Error when exporting from After Effects into Media Encoder

    Hi there. I am using After Effects CC and am trying to export>add to Adobe Media Encoder CC. Upon doing so, instead of the file being placed into Media Encoder CC, I get an error message
    I just updated to most recent update of After Effects via the Cloud today but no difference. Instead, After Effects just creates a folder on my system to house a duplicate composition file with "tmpAEtoAMEProject" at the beginning of file name. I can use the render queue out of After Effects just fine.
    Can someone give me a solution to how I can export out to Media Encoder CC? Probably something simple I am just missing. I don't know much/can't find much about how to know if Adobe Dynamic Link components are installed. Oh, and I have also tried to just drag the files into Adobe Media Encoder too but I still get this warning. If it helps, I am on an imac OSX 10.8.5. Thanks!

    Hey there. Yes, I have uninstalled AE, restarted, and reinstalled. Still get the same error shown in screenshot in my original question posted.

  • Total PC freeze when exporting from After Effects CC

    Hi guys,
    I'm having quite a serious problem exporting AFX files (via Media Encoder CC) and also occationaly during RAM previews.
    The problem itself is fairly simple. After a varying amount of time my PC will completely freeze and become totally unresponsive. This always seems to happen on more complex scenes involving raytracing, or C4D Lite layers and sometimes just generally complex compositions. I'm forced to restart my computer losing all render progress and any unsaved progress. A couple of times the crashes have totally messed up my AFX, corrupting any open saves and corrrupting my custom panel layouts (very annoying).
    I recently upgraded my PC to a fairly beefy spec primarily to cope with complex projects like these. Here are the specs from DxDiag:
    System Information
    Time of this report: 8/8/2013, 15:08:15
    Machine name: ALPHA-ONE
    Operating System: Windows 7 Professional 64-bit (6.1, Build 7600) (7600.win7_gdr.130318-1532)
    Language: English (Regional Setting: English)
    System Manufacturer: To be filled by O.E.M.
    System Model: To be filled by O.E.M.
    BIOS: BIOS Date: 01/11/13 16:18:14 Ver: 04.06.05
    Processor: AMD FX(tm)-8350 Eight-Core Processor            (8 CPUs), ~4.5GHz
    Memory: 16384MB RAM
    Available OS Memory: 8090MB RAM
    Page File: 4406MB used, 11773MB available
    Windows Dir: C:\Windows
    DirectX Version: DirectX 11
    DX Setup Parameters: Not found
    User DPI Setting: Using System DPI
    System DPI Setting: 96 DPI (100 percent)
    DWM DPI Scaling: Disabled
    DxDiag Version: 6.01.7600.16385 32bit Unicode
    I did notice after I had upgraded that AFX didn't support my new GFX card (Geforce 760) but I found an article that suggested a work around for this which did allow me to use the 760. I don't know if doing this is known to cause problems with renders? My GFX card has the latest drivers. I've tried disabling and enabling the GPU in AFX but either way the crashes occur. I also tried turning off/on Multicore processing as this has given me grief before. But that made no difference.
    My After Effect instalation is also the latest version.
    These crashes don't happen in other programs like C4D Lite (when rendering directly inside that program), or when playing recent and demanding games.
    I have 16GB of RAM installed but seem to only be able to use 8GB as available memory in AFX, which also shows in the Dxdiag report. I don't think this could be causing total system freezes though and do plan on trying to fix this issue when I get time.
    Thanks for any help!
    -Nick.

    joshweiland wrote:
    I re-read your original post...
    Mr.Nicklebe wrote:
    Here are the specs from DxDiag:
    System Information
    Memory: 16384MB RAM
    Available OS Memory: 8090MB RAM
    It looks like DxDiag DOES realize that you have 16GB installed, but for some reason only 8GB is provided to the OS.
    This is very odd.  Since it detects the full 16GB, I doubt that your RAM is faulty/unseated/etc.  If that were the case, it would not be recognized as 16GB.
    What CPU and motherboard are you using?  It's possible that a setting in your BIOS is to blame.
    I've seen this happen before on computers with integrated graphics.  They will use a portion of your system RAM as video RAM.  But this is typically only 256MB-512MB at most...not a whopping 8GB!
    Yeah pretty odd I know. My BIOS only reads 8GB of the RAM (doesnt mention 16GB at all I dont think), Resource Monitor and DXDIAG say 8GB of available memory and 16GB of total memory. I did Memtest 86 for 12 hours last night and whilst it came up with no RAM errors it also only detected half of my RAM anyway.
    I decided to do some experimenting today and tested each 8GB stick on its own in DIMM slot A2 (the manual recommends this slot for single sticks of RAM). PC wouldnt boot at all with one of the sticks but would boot with the other. So I've left my PC with that one 8GB stick in now as I suspect the other one could be faulty. I dont know if this is the cause of my orinal problem but I plan on trying to render some of the projects that were freezing my PC before and seeing if I still get those freezes. If I don't then hurray problem solved! If I do then I'm stumped as to what the cause could be.
    Oh and my motherboard/CPU are:
    CPU: AMD Piledriver FX-8 8350 Black Edition 3.50GHz @ 4.60GHz CPU
    Motherboard: Asus 990FX Sabertooth
    I agree about the BIOS settings potentially being the problem, I plan on monday to ask the site I bought the bundle from about this and see if I can get replacement RAM and/or advice on whether there's anything specific I can do that would fix this. I tried googling the problem many times but almost every thread I come across is just people who don't realise their 32bit OS cant take more than 4GB of RAM which isn't the issue I'm having.

  • Streaching occuring when rendering from After Effects to Premiere

    Hello,
    I am working on a short film that includes a short section with special effects. I exported the scenes into After Effects CS5 and set the sequence to 1280 by 720. (same as the Premiere sequence) After I finished working on the effects in After Effects I rendered it to bring it back into Premiere. But, when I brought it back into Premiere the video was streatched out. Any assistance would be great.
    Thanks
    Alex

    Instead of rendering out of Ae, why not simply Dynamically Link
    your composition into your Premiere project?
    File > Adobe Dynamic Link > Import After Effects Composition
    Create and link to After Effects compositions with Dynamic Link

  • HD noise when flat, goes away when tilted back now wont boot

    hey guys... i've been reading some of the discussions about HD noises and sounds. it seems like everyones HDs make noise or slow down when tilted. I HAVE THE COMPLETE OPPOSITE PROBLEM. i apologize for the long post:
    12" Powerbook [purchased 05/04 and well taken care of]
    mac OSX 10.3.9
    original toshiba HD 60GB
    its kind of weird. i was running ichat, iphoto, safari, photoshop, and iflash [flashcards] all at the same time when i noticed a significant slow down in performance which stalled all programs. i then head a loud whiring humming buzz that sometimes turned into grinding. of course this freaked me out. i tilted my powerbook backward to give it a listen and then the noise went away. not only that all the programs completed all previous requests faster than ive ever seen them perform before. well i repeated this to see if the effect was reproducable, and it was.
    well the next morning i turned it on and my powerbook was working fine. no noises or indications impending failure. well i had to leave the library so i shut my powerbook off but the filevault program wanted to recover unused HD space so i let it do its thing. when i tried to power on my powerbook it got to the grey screen with thespinning gear and wont get past that point.
    figuring that it was an HD problem, i got my buddy's ibook, set my powerbook into firewire mode by booting and pressing "T", and connected them. i was able to recover data off of my non admin accounts using Migration Assistant but my main admin account wont let me even touch its files due to the filevault settings. i found away to at least get to my files in the main acct by mounting its .ars [i think thats wht it was] image i found under my non main admin account user folder. the thing that gets me is that i can easily access my HD in firewire mode, but the powerbook itself wont get past that grey apple screen. it makes unusual noises and then stops and stays stuck on that screen with the spining gear going.
    now this is a major headache since im a med student and i need my powerbook to access my flashcards, notes, and online resources. ive come to realize how dependant ive been on this machine. can anyone help me? is it my HD thats the problem? is it a filevault thing? do i just need to reformat? why do i get that sound when the PB is flat but it goes away when its tilted? now im kicking myself in the butt for not getting applecare.
    thanks guys,
    Edward
    MS2 Ross University School of Medicine
    evilmcnasty.blogspot.com

    Edward:
    Last week, my PB started making the same noise that you've described, which is opposite of the other posts, ie buzzing when flat, quiet when tilted. I ran disk utility, TechTool Deluxe (that came with AppleCare), etc without finding anything wrong. Yesterday, I noticed that my s.m.a.r.t status shows my hard drive to be failing (in red letters). My understanding is that it will fail eventually, even though I am using the computer without incident right now. Suffice it to say, I have backed everything up and am waiting for the inevitable moment. I plan to call AppleCare today (sorry to hear you don't have it) to enquire about what I should do. In particular, I cannot go without a computer right now, this malfunction being at the least opportune moment. Can anyone say if AppleCare will give me a loaner until my PB is healthy again?
    I realize that this post is of little use to your situation, but I just wanted others to know that the "opposite buzzing sound" exists and that it seems to indicate an eventual failure if mine is the typical result of the first buzzing symptoms.
    Good luck with yours.
    Ernie

  • [problem]Error "sfntread library error (83::4)" when you start After Effects CS3 (Windows)

    Hello,
    I am experiencing the above stated problem in the subject. I downloaded the trial version off the website. But when starting the program, i got the error:
    Error "sfntread library error (83::4)" when I start After Effects CS3
    I tried looking at resolving it through the help posted in the support site.
    http://kb.adobe.com/selfservice/viewContent.do?externalId=kb402858&sliceId=2
    Apparently, the value which was asked to change, it was already set to "0"
    Is there not anything else I can do?

    Well, I have no more detailed info for you, but if this error (and other, similar ones) pops up, it is usually a good idea to take a look at your shared Adobe components and other Adobe programs. The error itself seems related to the Adobe font system and/or generic vector rasterization engine such as it is also used by Acrobat and various import/ export filters. Therefore a good place to start is to remove any fonts on the system that you don't need. The engine may simply be trying to load them and then fails because they are damged or have some otehr ominous info. If that fails, look into what otehr apps you have on the system. Run the Adobe Updater to make sure you have all the latest versions. If it still does not work think about uninstalling the products. I know it's a pain, but it may get AE to function. As a helper, use the CS3 Clean scripts from the support pages. These will work a little faste and really kill everything (compared to a normal uninstall), Just make sure to deactivate before uninstalling, or you may run into trouble when trying to reactivate.
    Mylenium

  • Exporting layers of audio from After Effects  cs6 to Premiere / or Audition? Is this possible?

    exporting layers of audio from After Effects  cs6 to Premiere / or Audition? Is this possible?
    Help - I have an After effects project with multiple layered files and want to copy these to Premiere / Audition. For example I know if you select multiple video files from After Effects these can be pasted straight into Premiere intact - but this does not work with audio. I want to take existing layered audio files from After Effects to Audition / or Premiere but can't copy and paste - is there a simple solution for this?

    Hi thanks Dave for responding - yes that could work as a 'workaround' -  I was hoping there would be a way I can keep the existing independent audio layers and corresponding audio levels from After Effects- in the same way I can copy and paste video files from After Effects to Premiere - rather than exporting a flattened AIFF /WAV from After Effects.
    This would then allow me a lot more control working on the final edit - especially as currently a lot of the audio layers overlap. It does seem there is no simple solution for this, so  otherwise I can do what you suggest - and 'stagger all the audio files' in sequence so they do not overlap on the timeline and then when I import the flattened exported AIFF file into Audition/ Premeire / I then can cut it up again and recreate the overlaps. Was hoping there might be a simple copy + paste method or other 'export method' but I guess this is simply not possible. It would save me about 7 hours of work, but not the end of the world I guess
    One final point - some of the audio clips are .mp3s but the majority are WAVS, hopefully this should not create any issues on the export.
    thanks again for your help, if you or anyone has any other solution pls let me know
    Best
    Alex

  • Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    Help my iPod won't let me download apps... I'll put my password in then it takes me to the app but then is just goes away then I do it again an it won't load or it will just go away again plz help I want to get apps

    You said you updated yur 1G iPod to 4.2.1. A 1G can only go to 3.1.3 and thus you must have jailbroken it to get to 4.2.1 and that can cause problems.
    ArealDJ wrote:
    I have the same problem.. apps won't download and won't open. I have a 1st Gen ipod touch and recently upgraded my MacBook Pro (2012) and as soon as I upgraded the iPod Touch to 4.2.1, this happened. I restored to factory defaults and still cannot dl and open apps. Any way to diagnose this problem? Apple tech charges $29.99 for out of warranty products and if I am reluctant to pay with them telling me its simply a hardware problem.

  • "When I select open in iBooks, iBooks opens and the PDF shows as thumbnail then goes away."

    "When I select open in iBooks, iBooks opens and the PDF shows as thumbnail then goes away." please help
    My iBook has at least 350 PDF file, some of them big i.e 40 MB

    Yup, it was uploaded to our school Wiki as a PDF, and Pages did open it.  I was then able to move it to iBooks, but I'd rather avoid the extra steps.

  • For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

    For some reason when I plug my phone up to charge it just keeps showing me the apple logo and then it goes away shows the battery sign is low and that its charging. So I'm wondering why it wont turn on would I have t get a new one, and would it be free

    If you've tried the basic troubleshooting steps (restart, reset, restore from backup, restore as new), and you've tried charging from a wall socket and these all fail, then you have a hardware problem.
    If your unit is still in warranty, you will be eligible for a replacement with a refurbished unit free of charge.  If you are out of your warranty period, you will be eligible for an out of warranty exchange which will cost the equivalent of 200 US dollars.

  • My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    My screen dims intermittently to almost completely dark, it goes away when I press the top button but, it is annoying.  what is wrong?

    Try the standard trouble-shooting steps: Restart, Reset, Restore. If these don't solve the issue then you may have a hardware probem. If so, contact Apple Support.
    Restart: Press On/Off button until the Slide to Power Off slider appears, select Slide to Power Off and, after the iPhone shuts down, then press the On/Off button until the Apple logo appears.
    Reset: Press the Home and On/Off buttons at the same time and hold them until the Apple logo appears (about 10 seconds). Ignore the "Slide to power off"
    Restore: Use iTunes on your computer to Restore your iPhone to as new.

  • When i open ibook, the iTunes store asks for my password. it goes away when i press cancel or when i put in my password. why is this happening?

    When I open IBook, the ITunes store asks for my password.  It goes away when I press cancel or enter my password.  It seems unnecessary to me.  Why is it doing this?  I already paid for the book. 

    If you are trying to update information for your apple id then go to appleid.apple.com and click on manage your apple ID... you'll probably have to enter your old email address/password

  • What is the easiest ways to create motion menus in Encore CS5 w/ After Effects CS5

    Hello,
    What is the easiest way to create motion Menus in Encore CS5?  I'm creating a motion menu in after effects CS5 and will import as a menu in Encore, but I want to keep the animation, while the buttons will navigate you to the appropriate timelines.  I want to keep the animation going throughout the duration of the menu?
    Thanks,

    Thanks Stan.  Big Help
    Date: Fri, 10 Jun 2011 20:07:23 -0600
    From: [email protected]
    To: [email protected]
    Subject: What is the easiest ways to create motion menus in Encore CS5 w/ After Effects CS5
    The first link is Encore CS5 help. It is a good beginning.  I'm not sure if the tutorial it links to is the same as my second link.  The AE help link below is also useful.
    CS5 allows creation of buttons in AE, but for plain navigation options, I think it is just as easy to add in Encore or Photoshop.
    http://help.adobe.com/en_US/encore/cs/using/WSA5513911-0AD1-440c-BDAD-2E0E806B425E.html
    Here's an adobe tutorial on using AE for EN menus:
    http://www.adobe.com/designcenter/video_workshop/?id=vid0258
    From the After Effects help:
    http://help.adobe.com/en_US/aftereffects/cs/using/WS3878526689cb91655866c1103906c6dea-7e45 a.html
    >

Maybe you are looking for

  • How to convert Web app into a channel?

    To whom it may concern, Does anyone know how to convert a Web app into a channel inside the Portal server 6.0? I developed the web app and tried to create a provider and a channel for it, but the Portal server did not recognize the WEB-INF folder and

  • Error while creating view in component - BT115H_SLSO

    Hi All, When I am creating view in the BSP Component workbench(T/code: BSP_WD_CMPWB), I am getting the error "Invalid GUI INPUT DATA :INVALID XMLBLOB DATA" shot and suggest me how to come out of this error. Component: BT115H_SLSO Regards, Praveen

  • Making Period Start Date read-only on Appraisal page

    Hi, I have a requirement to default Appraisal Period Start Date and Period End Date and make these fields non-editable. I am able to default the values for these fields by extending CO. When I make these fields read-only and performs any operation on

  • Sharing Files Over Network and computers not showing up in sidebar

    I am trying to figure out how to share files over the network. Now when I click onto the computer in my shared items, I do not get access to the home folder that I used to see. Instead, I am getting a folder image with the user name below it, but it

  • Trying to sync ipad with iphone.. how do i get app content to be backed up to icloud?

    Am  new to Apple.. I was able to get the app I want to appear on my iphone, but the content is not there.  Same for my ibooks; PDFs i downloaded on ipad are not visible on my iphone. help? (iphone 4s, ipad 2)