The iPad is stuck in recovery mode from iOS upgrade. Screen is blank and connecting it to my computer will not change the ststus. Any help would be appriciated.

While updating the iOS version on my iPad it entered Recovery Mode. The screen is blank and I can not get it to complete the recovery process. I have tried several times using both a MACBook and a Windows 7 based computer running the latest iTunes program. Is there anything I can do other than to send it to Apple repair?

Unable to update or restore
http://support.apple.com/kb/ht1808

Similar Messages

  • My iPad is stuck in recovery mode.  I already downloaded Snow Leopard and am making no progress.  Help!

    My iPad is stuck in recovery mode.  It was suggested before that I upgrade my computer, so I downloaded Snow Leopard and have tried resetting it, but it still isn't working.  What can I try next?

    FORCE IPAD INTO RECOVERY MODE
    1. Hold Sleep/Wake button down and slide to turn off iPad
    2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
    5. Release Home button.
    ON COMPUTER
    6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
    7. Select "Restore iPad"...

  • Ipad mini stuck in recovery mode after ios 8.1 update

    i have a first generation ipad mini which usually works fine.  last night the ios update appeared in my settings and i tried to install it.
    i didnt have enough space so deleted some apps and then installed.
    the ipad switched on at the end but said the update failed as i didnt have enough space i needed a little more.  i deleted more apps and attempted to install again
    this failed my ipad is now stuck in recovery mode, it hasn't taken itself out as apples help pages suggest after 15 minutes its been in recovery now for 15 hours
    i have tried to connect to itunes as the screen is telling me to but it will not recover from there either as apparently i can't connect to apple servers my connection isnt working - i assume because others are having this problem as i a using the same pc to post this message so know my network is fine.
    i need help to get out of recovery mode - itunes says my software is up to date so i may have this nightmare software already. 

    i originally tried to install the update using wifi and this did not work.  i think i might just chuck the thing as looking on the boards all my stuff will be lost anyway - i backed up 2 days ago but that is nowhere to be found now in itunes or the cloud kmt

  • IPad mini stucks in recovery mode afte iOS 8

    We tried to update iPad mini to iOS 8 via wifi yesterday. Now it shows the recovery mode screen and pressing home and power button in various ways does not help. We are on vacation without access to iTunes Or any other PC. We need iPad.
    Can anyone help?

    i originally tried to install the update using wifi and this did not work.  i think i might just chuck the thing as looking on the boards all my stuff will be lost anyway - i backed up 2 days ago but that is nowhere to be found now in itunes or the cloud kmt

  • Ipad 2 stuck in recovery mode after ios 6

    iOS 6 dowmloaded then after the install, it says connect to iTunes. While in iTunes it says its in recovery mode and downloading iOS 6 again but it will take 4 hours what do I do??

    restore in itunes

  • Hi so my ipad is stuck in recovery mode.  Once I connected to itunes to install the ios 8 software it says that its eligible for the request build and I tried the sudo nano command and that didn't work either. Please help thanks!

    Ipad mini stuck in recovery mode.
    My itunes is up-to-date.
    Sudo nano command is not working.

    yes i am sure. This are the exact words... "The iPad "iPad" could not be restored. The disk you are attempting to use is full. (Removing files and emptying the recycle bin will free up additional space". i tried some options, hard reset, redsnow, tinyumbrella but still it's stuck.

  • IPad 1, stuck in recovery mode, error 1601, wont turn on or restore/update

    Its a brand new iPad,
    its stuck in recovery mode, it says restore and update but it wont restore/ update because i get error 1601, How do i fix this problem ??? it wont even turn on please help?

    If it were in recovery mode, you would see this
    If its just a blank black screen, follow these steps
    Will not turn on, or will not turn on unless connected to power
    Verify that the Sleep/Wake button functions.   If it does not function, inspect it for signs of damage.   If the button is damaged or is not functioning when pressed, seek service.
    Check    if the Liquid Contact Indicator (LCI) in the headset jack or dock connector is activated or there are signs of corrosion or debris. Learn more about LCIs.
    Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
    After at least 15 minutes, if:
    The home screen appears: The iPhone should be working. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
    The low-battery image appears, even after the phone has charged for at least 20 minutes: See   "iPhone displays the low-battery image and is unresponsive" symptom in this article.
    If something other than the Home screen or Low Battery screen appears on the display, continue with this article for further troubleshooting steps.
    If the iPhone did not turn on, try resetting it while connected to the iPhone USB power adapter. To reset, press and hold the Sleep/Wake button and the Home button at the same time for at least ten seconds, until either the Apple logo or the battery symbol appears.
    If the display turns on, go to step 4.
    If the display remains black, go to next step.
    Restore the iPhone. Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
    If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.

  • I tried updating to iso 8.0.2 and now my ipad is stuck in recovery mode and will not do anything. it will not reset.

    I tried updating to iso 8.0.2 and now my iPad is stuck in recovery mode and will not do anything. it will not reset.

    RECOVERY MODE
    1. Turn off iPad
    2. Turn on computer and launch iTunes (make sure you have the latest version of iTune)
    3. Plug USB cable into computer's USB port
    4. Hold Home button down and plug the other end of cable into docking port.
    DO NOT RELEASE BUTTON until you see picture of iTunes and plug
    5. Release Home button.
    ON COMPUTER
    6. iTunes has detected iPad in recovery mode. You must restore this iPad before it can be used with iTunes.
    7. Select "Restore iPad"...
    Note:
    1. Data will be lost if you do not have backup
    2. You must follow step 1 to step 4 VERY CLOSELY.
    3. Repeat the process if necessary.

  • My IPad is stuck in recovery mode and now ITunes wont recognize it, what do I do? Keeps giving me a long error message.

    My IPad is stuck in recovery mode and now ITunes will not recognize it, it just gives me this long error message. What do I do, I've uninstalled and reinstalled ITunes.

    Check USB connections
    Related errors: 13, 14, 1600, 1601, 1602, 1603, 1604, 1611, 1643-1650, 2000, 2001, 2002, 2005, 2006, 2009, 4000, 4005, 4013, 4014, 4016, “invalid response,” and being prompted to restore again after a restore completes.
    If there’s an issue with the USB port, cable, dock, or hub, or if the device becomes disconnected during restore, try troubleshooting the USB connection, then troubleshooting your security software.
    To narrow down the issue, you can also change up your hardware:
    Use another USB cable.
    Plug your cable into a different USB port on your computer.
    Try a different dock connector (or no dock).
    Add (or remove) a USB hub between your device and computer.
    Connect your computer directly to your Internet source, with no routers, hubs, or switches.
    If you checked your connections and are still seeing the error message, check for hardware issues.
    Check for hardware issues
    Related errors: 1, 3, 10, 11, 12, 13, 14, 16, 20, 21, 23, 26, 27, 28, 29, 34, 35, 36, 37, 40, 1000, 1002, 1004, 1011, 1012, 1014, 1667, or 1669.
    Try to restore your iOS device two more times while connected with a cable, computer, and network you know are good. Also, confirm your security software and settings are allowing communication between your device and update servers. If you still see the error message when you update or restore, contact Apple support.

  • My iPad is stuck in recovery mode, and wont stay turned off in order to use redsnow.

          Alright so my iPad is stuck in recovery mode. I did some research and arrived at redsnow to fix the problem. In order to use redsnow's recovery fix option I have to power down my iPad. When I hold the sleep button though, no "slide to power off" appears, the screen just goes black then reboots into recovery mode 3 or 4 seconds later. Restarting it via holding the sleep and home buttons doesn't do anything. How do I get it to stay powered down? Any advice would be greatly appreciated.

    I believe I may have used the wrong terminology. My iPad screen looks identical to the picture shown in the link, which is what I reffered to as Recovery Mode. I was looking for a way to return to normal functionality, without having to restore my iPad. I have never backed up this iPad and would prefer not to lose any information on it. If this is impossible then I will just restore it and carry on.
    My main issue with restoring it is that I don't want to lose the pictures on it. If the restore doesn't erase the pictures, then I apologize for wasting your time and will be restoring it immediatly. However if I will lose the pictures than I'd prefer any other method of exiting this screen.

  • Why is my ipad stuck in recovery mode after IOS update?  I can't get it out even after I restore.  Please help!

    I did an IOS update and now my iPad is stuck in recovery mode and I can't get it out.  I have tried to restore through iTunes, but after restore it says it is still in recovery mode.  Please help!

    Try a Reset [Hold the Home and Sleep/Wake buttons down together for 10 seconds or so (until the Apple logo appears) and then release. The screen will go blank and then power ON again in the normal way.] It is app and data safe!

  • Our iPad is stuck in recovery mode after attempting to update.

    Our iPad is stuck in recovery mode after attempting to update to latest iOS..Help.

    It IS plugged into the pc. iTunes doesn't even recognize hat any device is connected.
    Reiboot isn't even working. considering trying DFU mode. no idea if that will even help.

  • Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6

    Ipad 2 stuck in Recovery mode after trying to upgrade with ISO6, help!

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

  • IPad 3 stuck in Recovery mode while trying to upgrade

    I attempted to upgrade my iPad 3 and received the error message that there was not enough memory. Linked it via USB to iTunes on PC laptop (updated iTunes to latest version). Error message said unable to upgrade the iPad, my only option is to Restore. However, that will erase all my data and settings which I have not backed up. Now I'm stuck. Either restore and lose all or leave iPad as is ... only problem with the latter is that the iPad is stuck in Recovery mode and everything I have tried does not release it. Would appreciate help with this as I now have a non-functioning iPad! Thank you.

    Hello ardsdon,
    Thank you for using Apple Support Communities. 
    I see your iPad is stuck in recovery mode. The following article addresses putting your phone into recovery mode and restoring it. 
    If you can't update or restore your iPhone, iPad, or iPod touch - Apple Support
    Regards,
    Jeff D. 

  • TS3274 iPad 2 stuck in recovery mode

    iPad is stuck in recovery mode. I don't want to restore and lose data, is there a way to do this?

    Restore ur iPad to iOS 5 or 6( if u have downloaded)
    <edited by host>
    Then connect your iPad to your computer ,open iTunes ,click on your iPad's name in the left column ,hold the shift key and press restore , chose the file u downloaded , Wait for the restore to finish.
    Then set up your iPad as a new iPad .
    Here you go, Now your iPad will be perfectly fine..

Maybe you are looking for

  • How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice

    Hi, Kindly solve, How to put Sales employee (Splcode) Mandatory Field, when adding A/R invoice. Regards, Rajeev.

  • File system recommendation in SAP -AIX

    Dear All , Pls check my current file system of PROD . Filesystem    GB blocks      Used      Free %Used Mounted on /dev/prddata1lv    120.00     66.61     53.39   56% /oracle/IRP/sapdata1 /dev/prddata2lv    120.00     94.24     25.76   79% /oracle/IR

  • 11g Trace File Problem

    I have an 11.1.0.7 database on a Windows 2003 64bit server. When I was building the database I turned on tracing in the SQLNET.ORA file. It didn't seem to work and I forgot about it and while I was backing up the server I noticed that a couple of dir

  • CS4 Crash or loop I need help

    Useing Dreamweaver CS4 FTP when connecting to the remonte I can not do a complete download or Get of the public-html folder. It will take about 3 to 4 times each time ending with the FTP locked up and looping "Operation timed out. Cancelling..." agai

  • Guess I do need a little help with packages after all...

    Tried figuring in this out for the past 3 hours, various searches, scenarios etc...b4 posting.... Okay, well....just like many aspects of this language, think I've got it down, and a new situation comes up where I can't implement it....in this case m