The performance of SELECT_TEXT function module

hi all,
i have customize report program when i execute it by giving the inputs in selection screen it is taking around 6 minutes to display the output list. iby using se30 and st05 i found out that
the function module " SELECT_TEXT " is consuming more time
below is the function module can one help me in miimizing the performance the sy-subrc = 0 after the FM is called. but the only problem is it is fectiching 576,800 records consuming more time . can any one help me ?
CALL FUNCTION 'SELECT_TEXT'
       EXPORTING
            client     = sy-mandt
            id         = '0001'
            language   = sy-langu
            name       = f_tdname
            object     = c_tdobject
       TABLES
            selections = tab_rbkp_text.

If you explain further why you are that function module then we can give other options
this is what the Function module help lists
SAPscript: Select text
+The SELECT_TEXT creates a table with the text headers of all text modules which correspond to the requirements specified in OBJECT, NAME, ID, and LANGUAGE. The entries in the parameters OBJECT, NAME, ID, and LANGUAGE can also be generic.+
The search area can be limited further via the parameter TEXTMEMORY_ONLY or DATABASE_ONLY.

Similar Messages

What are the input parameters for Function Module

Dear Experts,
I want to generate a Sales Tax returns report,those fields are not available in my existing Datasources.
For that i want to write a Generic Datasource with Function Module.
audat
bukrs
vkorg
vtweg
spart
aurat
auart
netwr
mwsbp
kschl zedp(consition type)
kschl zvat(condition type)
ksch zcst(condition type)
matkl material group
Here what are the Input parameters for Function Module.
Thanks in Advance.
Srinivasan.

Srinivasan-
For creating a Generic extractor based on a FM, you first of all need to know what is going to be your structure.. i.e. what all fields you need to pull from what all tables. A functional consultant may help you identify the exact DB tables.
Once you know them, hand over the requirement and the pdf mentioned by Krishna to the ABAP guy, he would be able to take this up further.
Also decide 1st whether you would be using a full load or delta. There is a slight difference in the way they are built.
Let me know how it goes.
-Bhushan.

Howt 2 delta with the extractor created on Function Module..

hi there,
can anybody tell me how to update delta with the extractor created on Function Module..
rgds,
amol

refer to the document at the below link
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/d3219af2-0c01-0010-71ac-dbb4356cf4bf
Generic Extractor using FM with Delta Logic
hope it helps,
rgs,
Parth.
Edited by: Partho Mukherjee on Jan 12, 2009 6:00 PM

1)    Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?       i. The list of the modules that are being managed by SAP Solution Manager(s)      ii. The performance metrics of those modules/components at th

1)
Is there North Bound Interface / API from SAP Solution Manager available for 3rd party integration?
i. The list of the modules that are being managed by SAP Solution Manager(s)
ii. The performance metrics of those modules/components at the high level
iii. The information about Early Watch Alerts (or situations to watch for)
2)
Is there a full SNMP interface for getting the above information from SAP Solution Manager?
3)
Is that understanding that SAP has SNMP support for forwarding alerts to a 3rd party system, correct?
4)
Does SAP has both free and licensed? If yes then what are the advantages of licensed over the open/free version?

Mugunthan
Yes we have applied 11i.AZ.H.2. I am getting several errors still that we trying to resolve
One of them is
===========>>>
Uploading snapshot to central instance failed, with 3 different messages
Error: An invalid status '-1' was passed to fnd_concurrent.set_completion_status. The valid statuses are: 'NORMAL', 'WARNING', 'ERROR'FND     at oracle.apps.az.r12.util.XmlTransmorpher.<init>(XmlTransmorpher.java:301)
     at oracle.apps.az.r12.extractor.cpserver.APIExtractor.insertGenericSelectionSet(APIExtractor.java:231)
please assist.
regards
girish

Storing the output of a function module into a custom table

Hi Gurus,
Is it possible to store the output of a function module into a custom table.How can this be done?Is it complex?

hi,
After u execute the FM and get values in the internal table ITAB_RESULT. Create a custom table having structure same as ITAB_RESULT call it ZRESULT.
data :wa type ITAB_RESULT.
call FM and get result it ITAB_RESULT
loop at itab_result.
move-corresponding itab_result to wa.
insert wa to ZRESULT.
endloop.
Regards,
Mansi.

How to change the status of the system programmatically with Function Module

I Was trying to change the status of the notification through STATUS_CHANGE_INTERN function module . But It is not changing the status of the notification.
Can any one help to understand what is going wrong ... or any other function module to change status of Customer complaint notification ..

Hi KK,
Please can you take clues form the below discussion thread -
http://scn.sap.com/thread/775169
Thanks to all original contributors of this thread!!
NOTE: Please note that the main point explain here is that, if you are willing to change to a status Ex, NOPR, NOCO, etc then you will need to pass on the value 'I0070', 'I0072', etc. I will also go ahead and like to add one more point here to make the language check as well like "EN", 'DE', etc as these statuses are language dependent too.
Thanks,
Arijit

Delta Problem while extracting the data by using function module

Hi Experts,
I have extracted the data by using Function module, for delta loads I have given Calday and additive delta in Generic delta settings, in BW side I have initialized the data after that I have given delta update option in infopackage and I made process chain also, every day process chain is running successfully but it is showing zero records, but there is a data in Data source (RSA3), means delta is not working.
What is the problem,
Is there any another settings for delta loads,
Please help me to do this,
Helpful answer will be appreciated with points,
Regards,
Venkat

Hi,
Try this delta type :NEW STATUS FOR CHANGED RECORDS.
More information from Nagesh, this information may help
1. New status for changed Records.
2. Additive delta.
New status for changed records means
New Order
order no quantity
1000 10
order changed to quntity 8. then 2 records will posted 2 BW in first case.
1000 -10
1000 8
if you come to Additve delta.
for the same case it will send the same record as
1000 10
changed records
1000 -2
this is the difference. New status with changed records should be used only in association with ODS not cube becoz we don't have overwrite option.
Additive delta we can use for ODS and Cubes with update mode Addition.
Regards,
Satya

How to take back the control from RFC function module to calling program

Hi,
In our system landscape, more than 200 child systems are connected to Solution manager(SMP). I have copied a RFC enabled function module into all the child systems and calling that FM from Sol Man in sychronous mode.
Here goes my code in SolMan.
LOOP AT it_dest INTO wa_dest.
CALL FUNCTION 'Z_GET_LOGIN_DETAILS' DESTINATION wa_dest-rfcdest
    EXPORTING
      date_fr               = s_date-low
      date_to               = s_date-high
    TABLES
      tab_data              = it_val
    EXCEPTIONS
      communication_failure = 1
      system_failure        = 2
      OTHERS                = 3.
IF sy-subrc EQ 0.
*     Updates zuserlogon
      MODIFY zt_logon_det FROM TABLE it_val.
      COMMIT WORK.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, 'succesfully updated.'.
ELSE.
      WRITE:/'RFC for Destination', wa_dest-rfcdest, ' failed.'.
ENDIF.
ENDLOOP.
Few child systems are very slow & takes more than 20 minutes(Many of the times system hangs) to return the result. But I should not wait for so long. Even if the child system doesn't return any values in 5 minutes I shoud continue with other system ignoring the current one.
I tried calling the FM in asynchronous mode(STARTING NEW TASK) but no success because only 6 DIA processes possible but as I said I have more than 200 systems connected to SolMan.
Please help me resolving this problem.
Thanks,
Prathap

If there are only few child systems with bad response time, use asynchronous call using a CALL FUNCTION func STARTING NEW TASK task DESTINATION dest PERFORMING subr or CALLING meth ON END OF TASK. Count asynchronous calls still running/waiting (increment a counter when creating a task (not the one used for task id). In the form/method performed at end of a call decrement the counter. When counter is lower than a limit, 4-5 if 6 processes (*), perform an asynchronous call else perform a synchronous call or wait until the counter falls below the limit.
Regards,
Raymond
(*) Use SPBT_INITIALIZE at start of program to get actual number of free/available processes.

Perform In RFC function Module

Hi Experts,
Can we use perform statement inside the RFC function module.
I am working with 4.6b version.
I am not sure about the cause of error.
Earlier without perform it was working well.
Now I have written perform , it is giving me error.
What would be the cause of the error.
Thanks In Advance
Irfan Hussain

Hi,
what is the error, what it is saying. and are you sure of that.
try to use using parameter
PERFORM MOVE_HEADER_IN TABLES RETURN
<b>USING</b> SALESDOCUMENT
SALES_HEADER_IN.
Regards
vijay

PERFORM in Z Function Module

Greetings!
I'm creating a Z function module and within it I will looping through an internal table and would like to add a PERFORM routine where I pass a couple of data variables from my itab and then within the PERFORM routine take that data with some other coding/validating and fill an internal table from the main function module however when I build the PERFORM routine in the fm include it doesn't recognize my internal table.
my code looks a little like this in the fm..
loop at itab...
perform validate_data using var1 var2 va3.
endloop.
Do I need to pass the itab with a CHANGING parameter of the PERFORM call?

Hi
U can became the parameters of fm interface as global data:
In trx SM37 go to EDIT->INTERFACE->GLOBALIZE PARAMETER
else
- or u need to use an USING parameter in your FORM in order to transfer the data from z fm to form;
- or u need to use a workarea defined as global data in order to transfer the data from z fm to form.
Max

How to pick the entries from a function module fields values

hi guys,
i have a function module 'BP_JOBLOG_READ.when i execute this for a particular jobname,i will get some entries.again if i click those entries,i will get some fields with values.in that one field 'text' contains total credit amount(purely numeric).how to fetch this value into internal tabel and update into my internal table.very urgent.plz provide some coding.rewards wil b there for helpful sggestion.

Mahesh,
Use the FM BP_JOBLOG_SHOW to display those job logs.
Hope this is helpful.
Thanks,
Naren

Populating the output parameter in function module.

Hi Experts,
I have written a function module,with material number,BEZEI as input and mvgr2 as output from table tvm2t.I am facing a problem in populating the material number as well in outputtable.The material number in input is nothing to do with output.
please help me at the earliest.
Regards,
Sridevi.

Hmmm, you wrote that the output is 'table parameter' but you mention 2 single fields. If you expect a good reply here, it helps to mention how you defined the table and how you select the data for the output. For example: input is matnr and you select the material group of this matnr. Output is all other matnr of this material group. Then we would know what you want to do here.
So please describe what you need and give us the table description.
Regards
Nicola

What is the use of CALL FUNCTION MODULE - AT BACKGROUND TASK?

Hi experts,
I found Call functional module in background task will make the FM run at the next commit work as some people said. So I have some questions:
1 if we use COMMIT WORK commend, the pending FM will be called? If there are several FMs called at background task, what is the sequence of them? How many conditions will trigger the running of these FMs?
2 Where can I find the log of this pending FMs? In SAP library, it says there are 2 tables. But I checked these tables and can only find the FM name and user of it. And I can not understand content of these tables. It seems one is for the main information of FM, and the other is for the data of the FM, maybe the parameters.
3 If I call a FM in this way, Can I canncel it before the next commit work in some way?
Finally, thanks for reading and help.

HI,
When the COMMIT WORK statement is executed, the function modules registered for the current SAP-LUW are started in the order in which they were registered. ROLLBACK WORK deletes all previous registrations for the current SAP-LUW.
If the specified destination is not available when COMMIT WORK is executed, an executable program called RSARFCSE is started in background processing. By default, this tries to start the function modules registered for a SAP-LUW in their destination every 15 minutes and up to 30 times. These parameters can be changed in the transaction SM59. If the destination does not become available within the defined time, it is recorded in the database table ARFCSDATA as the entry "CPICERR". The entry in the database table ARFCSSTATE is deleted after a standard period of eight days

Passing the structure to rfc function module

hi,
iam having a rfc function module which is importing structure.
i have to pass only one field value to that structure.
how can i pass that field value to that structure.
it is very urgent.
thanks in advance

Hi..
You have to Declare the ACTUAL PARAMETER (workarea) with the Same Structure as that of the FORMAL PARAMETER.
but you can fill only the FIELD that you want pass in the workarea and pass it to the RFC.
<b>Reward if helpful.</b>

Problem in the creation of rfc function module

hi,
I am creating one rfc function module comparing to standard non-rfc function module. In that one i have one export parameter with the standard strcture type. but this stcture component contains with strcture type. among all these components four fields are common. but when i am trying to activate function module it is giving message you cannot use internal tables, strings,references, or strctures as components. that function module name is BAL_FILTER_CREATE and that export parameter name is that export parameter name is E_S_LOG_FILTER that associated type is BAL_S_LFIL. how can i solve the problem. pls give me solution as soon as possible.

hi,
for rfc fm's u should enable the call by value check box which will appear on that of import and export parameters. tick that one for each parameter in rfc and activate.
if helpful reward some points.
with regards,
Suresh Aluri.

The performance of SELECT_TEXT function module

Similar Messages

Maybe you are looking for