There is no USB drive connected to the system.

I have plugged in the Superdrive to the new iMac 27 that came yesterday.
This comment is being given when I am in bootcamp.
"There is no USB drive connected to the system."
The Superdrive is plugged into a USB Drive and when you place a cd/dvd in the Superdrive the mac picks up that there is a disk in the Superdrive.
How can correct this issue?

Note: I would like to download the latest Windows support software from Apple onto a DVD so then I can install Windows 7 using bootcamp.
I prefer not to us a flash drive.
What is the easiest way to correct this issue?

Similar Messages

HT3986 This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue. "' Can someone help me . ?

This what my boot camp says , when ever i am trying to instal windows 7 ''There is no USB drive connected to the system. Please insert a USB drive to continue.

pump

Boot Camp Assistant says There is no USB drive connected to the system

I have a mid-2012 11” Macbook Air and a USB Superdrive. I am trying to use Boot Camp Assistant but it is not letting me proceed. With the Superdrive plugged and Windows 7 (full version) DVD in the drive, I get the message “No USB Drive” – “There is no USB drive connected to the system. Please insert a USB drive to continue.”
I checked using Finder and Go->Computer and there is the Windows 7 installation DVD mounted properly. The Superdrive spins up when I plug it in. I tried both USB ports. I tried re-booting with the Superdrive attached. The laptop is plugged in and there is an internet connection. It is running Mac OS X 10.8.3. I read the Installation and Setup PDF guide and there was no mention of the problem. I searched these forums and found that two other people are/have experienced the same problem, but there is no posted solution.

Randall Venhola wrote:
At the second step in the wizard, there is a dialog with three check-boxes. The only way I can proceed is if I uncheck the option "Download the latest Windows support software from Apple". When checked, I get the "No USB drive" message. Checking or unchecking the other two options does not change the behavior ("Create a Windows 7 or later install disk" and "Install Windows 7 or later"). I have tried with the Superdrive attached with Window 7 in the drive, with a blank DVD and without the Superdrive.
You are not following the Boot Camp instructions. Did you select the option to read the instructions? When running Boot Camp Assistant you are given the option to download the support software. If this is selected you must connect a usb stick that is correctly formatted per the instructions. At this point in the process you sshould not have your superdrive or Windows dvd connected.
Read the instructions.

Can I perform a Time Machine backup to a USB drive connected to the Time Capsule 3TB

I would like to perform Time Machine backups to a portable USB drive, to use as an off-site backup copy. However, when I plug the drive into the Time Capsule (3TB) it isn't seen by Time Machine from any of the computers on my network. What do I need to do to make this work?

I'm not sure about whether Time Machine can include a drive that is a month out of date in a normal rotation.
This won't be a "normal" rotation. Assuming that you have already configured Time Machine on each Mac to back up to the USB drive, when you connect the drive to the Time Capsule, you will need to manually click Backup Now on a Mac to get the backup started. Then, do the same with other Macs that you want to back up.
You could wait and see if Time Machine will start to back up on its own, but the wait would be unpredictable as far as time was concerned.
Time Machine will also spend a good deal more time in the "Preparing" stage since it will have to look a month of history on the Mac since the last backup.
It is set up and recognized in the Airport utility, and mounts normally. I can see the files using finder, but I can't get Time Machine to recognize that it is there and available for backups.
So, if you open System Preferences on a Mac,
Then, open Time Machine
Click Add or Remove Disk
The USB drive doe not appear as a potential destination?
Have you restarted both the Mac and the Time Capsule?
Any recent changes to the Mac.....like installing a new operating system?

USB drive connected to airport i cant see it??

Hello all, i have an airport extreme. network is all setup fine. I have a USB drive connected to the airport setup for timemachine backups. What i would do is turn it on every week for the day and all my mac would backup to it. Last night i turn it on for my backups and none of my macs seems to be able to find it. Well today right out of the blue the imac suddenly sees it and runs a backup. But i cant see it with the macbook pro. I double checked the setting on the airport and dont see anything out of place. I can however see the drive in finder but when i click on it system tells me it cant connect. Any suggestions?

WesternCanuk wrote:
Apple is now forcing me to purchase a time capsule as they do not support puggin in a USB drive.
it's not new. this information has been available for some time.
Now this worked perfectly
it did (and does) so for many users. it just means is that, if you run into problems (as you do now), there will be no support from Apple.
I now have to physically connect my usb drive to each of my computers to have them back up?
no. you'd connect the drive to one machine and let the other Macs back up to it via your network.
printer i suppose ?
yes. and HD's for sharing files across your network - just not for TM backups !
JGG

Time Capsule Hangs with USB Drive Connected after installing 10.5.6 update

The 10.5.6 update basically made my External USB Disk connected to the Time Capsule unusable. I've repaired the permissions as suggested in other posts - this did not fix the problem.
I was unable to perform any incremental backups initially after the 10.5.6 update, so I archived my sparsebundle and created a new one by doing a full fresh backup - which completed successfully. However, after the backup, I was unable to connect to the Time Capsule or the USB drive connected to the Time Capsule via Finder - when trying to connect, my computer hangs and I'm forced to do a hard restart of BOTH my computer AND the Time Capsule, if I just restart one or the other the problem persists. If I let the connection attempt run long enough I get an "Error Code: -8072" message and still have to do a hard restart. After the hard restart of my computer and Time Capsule I'm able to connect to the Time Capsule and the USB drive connected to Time Capsule just fine. However, once the Time Machine backup runs again - the same problem returns, I can no longer access the Time Capsule or the USB drive connected to Time Capsule via Finder and have to do a hard restart of BOTH my computer AND Time Capsule. This 10.5.6 update has been havoc, anyone have the same troubles or ideas for resolving this? Before updating to 10.5.6 my system was working flawlessly with Time Capsule and the connected USB drive.
UPDATE: I've just verified that this problem only occurs with my external LaCie Hard Drive connected to Time Capsule via USB. If I disconnect my LaCie Hard Drive from the Time Capsule and restart the Time Capsule everything works fine (backups, access to Time Capsule Disk from Finder). If I connect the LaCie Hard Drive via USB to the Time Capsule, I am able to access the LaCie Hard Drive in Finder UNTIL the next Time Machine backup. After the first Time Machine backup with the USB drive connected, I can no longer access the USB drive from Finder - Finder hangs and eventually produces "Error Code: -8072". If I disconnect the USB drive, then plug it back in - Finder no longer hangs and I can access the drive connected to Time Capsule until the next backup occurs.
Anybody have ANY ideas? This worked fine before the 10.5.6 update!

I am having a similar problem. Never tried it before installing 10.5.6, but have a Time Capsule (500GB) with a 1TB WD MyBook Essential Edition connected via USB. Hardware is password protected by authorized users of network and needs separate login to access. When I initially set it up, it worked fine (though too difficult to set up). The WD storage drive showed up in Finder window as a subset of the Time Capsule after clicking on the Time Capsule icon. I had an "-8072" error message yesterday that I ignored, but then the file contents of the WD storage drive took forever to be viewed in Finder (though video files could be accessed wirelessly). Today started having a problem... coincidentally?... after a Time Machine backup, and got the message: "The operation could not be completed. An unexpected error occurred (error code -8072)." Now I am unable to get into the WD drive when I click on "Connect As" on the Time Capsule icon in the Finder menu... I just get the -8072 error. I no longer even see the Time Capsule disk as a subset of the Time Capsule icon in the Finder Toolbar.
What is going on???

Using Spotlight to search USB drive connected to Airport Extreme base stati

Hi all,
I successfully connected a USB hard drive to my Airport Extreme base station (the drive has its own power supply; when I tried connecting a USB-powered drive, it wouldn't show up). However, I find that I cannot search the USB hard drive over the Airport network. That is not very convenient, to say the least. Is this possible without paying $500 for Snow Leopard server software or waiting for Lion (with a rumored built-in server function) to arrive?
Thank you!

My last response was incorrect. The base station is in the finder window, under "Shared." I click on that and then I see the USB driver. Also, I went to finder prefs and clicked to show servers on the desktop. So now the USB drive connected to the base station shows up on my desktop. But I still can't search it.
Thanks again.

Can a time machine usb drive backup the data from an external usb drive connected to and airport extreme*

can a time machine usb drive conected to my mac book backup the data from an external usb drive connected to and airport extreme ?

Hi Adam, if you think yoiur HD may be failing you could do a TM restore onto the new disk. I would rather see you do a clone either SuperDuper or CarbonCopy Cloner.Of your internal drive. That way you have a bootable backup in case it does fail.
btw - what are the symptoms of your failing drive?
-mj
Message was edited by: macjack

Can't access a USB Drive connected to Time Capsule from a Windows PC. Apple Care can't/won't assist. HELP!!!

Trying to get my Windows 7 PC to access the USB Drive that is connected to my Time Capsule. I have a Fat32 Formatted USB drive connected to a 2TB Time Capsule and I'm trying to get access to that drive from a Windows 7 PC. I've attempted to map the network drive (based on some 3-4 year old articles I could find online) but any time I access a file from the PC, the Time Capsule "freaks out" and disconnects all connections to it which forces me to unplug it to restart the Tim Capsule. I'm at a loss now as to what to do.
Spent a few hours talking to Apple about this and much more. Apple Care can't or won't help with this particular problem (the guy I talked to, as nice and helpful as he wanted to be, had no experience supporting their hardware in a Windows environment).
Someone has to know how to fix this so, PLEASE, help if you can!

First off, Archon23, what you want to achieve is possible. I have access to both my Time Capsule (TC) and the USB drive connected to it, from a Win. 7 and Win. XP machine.
Here is what I see from the Windows side of things:
     From My Computer - TC USB Drive (Y)
     From Windows HomeNet - Time Capsule:
Now getting there is the trick.
One caveat before proceeding: I am not well versed in Windows Networks, Windows Sharing and Firewall settings so some of the following may not be elegant, may not be absolutely required, and may not be the best way of getting there. But it is what I did to see both the TC drive and it's attached USB drive on the Windows side of my network..
1.) First, I added Airport Utility to the Inbound rules of Win 7 Firewall
While poking around my Network Sharing and Firewall settings trying to figure this out, I got a Pop-up recommending I do that. AND I did that. Oh, and while you are at it, make sure you have a Home network established.
2.) Next, on a hunch, I installed a USB Wi-Fi Adapter (under $20) to my Win PC, enabled that Wi-Fi connection and disabled my Ethernet connection. I was getting no where on this matter with my Ethernet connection to a DSL Gateway. But with a Wi-Fi connection to my AirPort Express Base Station, I made progress.
3.) Finally, while poking around my Network Sharing Center some more, one by one I started the various network device Setup Wizards in there, and Trouble Shooters, to find the elusive TC/USB devices in question...AND voila, it worked.   And it's stable, been this way for going on two weeks now.
Good luck.

Backing Up a USB Drive Connected to Airport Extreme

I'm considering buying an Airport Extreme Base Station and connecting a hard drive to it to share/store files across the network. I'm thinking of storing mostly video and music files there. I will be using Time Machine with a dedicated HD for each of the individual Mac on the network but TM won't work for the drive connected to the AEBS (as I understand). Any ideas on the best solution to back up network share drive?

Sorry to hijack the thread, but it looks like Jane has the answers I need.
I'm looking to get an USB drive to back up three macs, one macbook air on leopard, macbook pro running tiger, and an imac running panther.
I'd like to plug a portable external hard drive to my AEBSn so that I can work on any computer and back up to the drive and then take the drive and the macbook air with me when I travel so I can work when away, as well as having a printer attached to the AEBSn so I can print wirelessly.
I've heard that for a drive to be recognised when attached to the AEBSn it will need to have its own power supply and not receive it through the USB connection. Is this true?
I'm going to need a hub anyway (so I can run the printer) but if I buy a powered hub, will the AEBSn recognise an USB drive that gets it's power from the hub?
Or will I need to buy a USB drive that has its own power supply regardless of whether the USB hub is powered or not?
Thanks for any help.

Accessing a USB drive connected to Airport Extreme over Internet

Hello!
I have an iPad, I have an Airport Extreme with a USB drive connected and I have a MobileMe account.
And I'm aware that as yet there's no Back To My Mac for iPad.
Is there an easy way on the iPad to connect remotely to the USB drive, over the Internet?
I don't want to have to leave my MacBook Pro on whilst I'm travelling.
I've looked at Logmein and Filebrowser and iTeleport and can't find a way to do this.
Has anyone managed to suss this???
Many thanks....

I am not ware of any way of doing what you want since, to my knowledge, the AE does not function as a server to "serve" the contents of a connected USB drive. I have a LaCie NAS and that NAS includes a FTP server that I can access via my iPad via AirSharing HD.

Automatically open USB Drive (connected to Airport Extreme) in Finder

I have a 1TB USB drive connected to my Airport Extreme (version 7.6.3).
File sharing is enabled in the Airport-configuration program.
But I liked to have this USB drive displayed (automatically) on the desktop. Same as is happening with the harddisk.
So I don't have to manually open the networ, Airport Extreme station and the USB drive (see picture below).
Does anyone have a suggestion ?
Thanks in advance.

Thanks Bob.
I noticed that the USB drive is displayed with a different icon. Below the icon if I use the automatic connection as you have suggested.
And if I connect it manually I get the belowlisted icon.
What is the difference between those ?
And is there a difference in performance or capabilities ?
Thanks in advance.

Can't Delete Files on USB Drive Connected to Airport Extreme

I'm trying to delete some files on a USB drive connected to my Airport Extreme, but I keep getting a error message that I don't have sufficient privileges to do so. I've tried super deletion applications like FileXaminer, without any success. What other methods are there?

Thanks for the info.
Were you using the drive for Time Machine backups, by chance? Time Machine backups are stored in a different format when the disk is connected directly to a computer. So, you won't be able to continue to use the old backups when the drive location is changed.
You might want to check the drive by connecting directly to your Mac and running Disk Utility to "Verify Disk" and "Repair Disk" if indicated.
Even if the drive has it's own power supply, a powered USB hub is usually needed on the AirPort Extreme because the power at the USB port is quite limited.
Message was edited by: Bob Timmons

Time machine backup from USB drive connected and backing up to Time Capsule

Hi all forum virgin here, so be gentle.
I'll get straight to it. Much net trawling hasn't resulted in a definitive answer on this which surely I'm not alone in
I have: MBP networked to TC (where TM resides) and USB drive connected.
A- I simply want to TM backup not only MBP but USB drive on network as well?
As far as I can see there is no way of selecting this and after TM back has finished the only way I can check is
to enter TM (fancy space screen view) and obviously idrive doesn't appear in finder view.
I have tried connecting to MBP and obviously TM backs it up too and I can see in Enter TM. But I need this
drive on network so a further 2 things here:-
B- when I remove from MBP and TM backs up again will it see it's not there and delete as a change?
C- will it keep in previous backups if I cycle back to that particular one?
Andy help here would be most welcome

Slymon2000 wrote:
B- when I remove from MBP and TM backs up again will it see it's not there and delete as a change?
Sooner or later, yes, as LaPastnague says. It depends on when the backups are done. The first backup of each day is kept for a month; all others are deleted after 24 hours. After a month, the first backup of the week is kept as long as there's room, and the others deleted.
Obviously not a reliable solution.
A better method might be to use a different app to back it up to the TC's internal HD, but that presents another problem. See #Q3 in Using Time Machine with a Time Capsule for an explanation and some possible workarounds.
The 3rd-party apps CarbonCopyCloner and ChronoSynch can do network backups (others probably can, too).
So you might be able to "reserve" some space on the TC's HD and use one of those apps. As LaPastnague says, though, that will be relatively slow.
If there isn't enough room on the TC's internal HD, you could get another USB drive and connect it to the TC also (via a powered USB hub) and back up to it. That will be even slower, though.

HT201250 Time machine back up using a external hard drive connected to the Airport extreme

How can I setup a time machine back up using a external hard drive connected to the Airport extreme? Even better for time managment purposes I want to use the Eithernet Thunderbolt connection for the first back up and then through the wifi there after for daily routine Time Machine back ups.

You can attach a hard drive, but Time Machine backups to a drive at the USB port at the AirPort Extreme are not supported by Apple, so it's not possible to say what your actual results might be.
If you decide to try this, it would be wise to have a secondary backup plan in place as well.
http://docs.info.apple.com/article.html?path=Mac/10.6/en/15139.html

There is no USB drive connected to the system.

Similar Messages

Maybe you are looking for