To export and import oracle 11g table data only

Hi Gurus,
Just not sure of the procedure to follow in the export just the table data and then truncate the table do some changes(not table structure changes ) and then import the same table data in to the relevent table .
Could some please help me in the setps involved in it .
Thanks a Lot in advance

If you can use Data Pump, here are your commands:
expdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name content=data_only
impdp table_owner/password directory=<your_directory> dumpfile=table_name.dmp tables=table_name table_exists_action=append
Data Pump requires version 10.1 or later.
Dean

Similar Messages

Export and import of an table data

Hi All,
I have a situation where i need to append/import the production table ( X ) data to test table ( X ) which has some data already in it and should not be lost during the operation. The record count is around 6 million .
Any expert suggestion or tips with export and import command is highly appriciable.
Thanks in advance .

if you are using
IMPDP --- use table_exist_action=append
IMP -- ignore=y
Lets say
impdp username/pwd directory=<directory_name> dumpfile=<dumpfile_name> tables=X table_exist_action=APPEND.
This will append the data to existing table

Step to export and import oracle 10g on AIX,LINUX

Hi ,
Plase any one can give nme the steps to be followed to export and import oracle 10g database from AIX to AIX and LINUX also.
Waiting for your response.
Thanks..

You dont have to follow any special steps, Export and Import are same on all OS's.

Export and import Oracle 10G database

Hello all
Can anyone tell me once for all how can i backup oracle 10G database and restore it in other computer (export and import)
thanks alot
Ron

Do you can access to metalink?
If not, I copy an paste this doc's....
Doc ID: Note:10767.1
Subject: How to perform FULL System Export/Imports
Type: BULLETIN
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 18-APR-1994
Last Revision Date: 30-AUG-2002
Purpose
This article highlights some important points to consider when performing
a Full System Export and Import.
Scope and Application
It is intended to assist users performing FULL System Exports and Imports.
A Full System Export and Import is a useful way to replicate or clean up
a database. Please note the following guidelines when performing a Full
System Export and Import:
1. When performing the import, ensure you are pointing at the correct
instance. Always check values for the SID and two task driver before
proceeding.
*Note: On Unix systems, just entering a sub-shell, such as using
C-shell, can change the database that the import would work
against.
2. When possible, it is advisable to take a physical copy of the
exported database and the database you intend to import into before
starting the import. This ensures any mistakes are reversible.
3. NEVER run a FULL SYSTEM IMPORT on a machine that has more than one
database UNLESS you are 100% sure all tablespaces have been
pre-created. A full import will create any undefined tablespaces
using the same datafile names as the exported database. There are
situations where this is very dangerous:
-> If the datafiles belong to ANY other database, they will be
CORRUPTED. This is especially true if the exported database is
on the same machine, because its datafiles will be re-used by
the database you are importing into.
-> If the datafiles have names that clash with existing operating
system files.
4. When exporting, it is advisable to also produce a report showing
information you may need before / after the import:
-> List the tablespaces and datafiles
-> List the rollback segments
-> List a count, by user, of each object type such as tables,
indexes, etc.
This enables you to ensure that tablespaces have been pre-created
and to check the success of the import after it is complete.
5. If you are creating a completely new database from an export, remember
to create an extra rollback segment in SYSTEM, and make this available
in the init.ora file before proceeding with the import.
6. There are some versions of export that do not retain sequence numbers
correctly. It is advisable to select next_value for each sequence
after the export so that these can be checked after import.
Following these guidelines will help you to avoid major problems.
Doc ID: Note:174226.1
Subject: How To Copy an Oracle Database To Another Machine
Type: HOWTO
Status: PUBLISHED
Content Type: TEXT/X-HTML
Creation Date: 12-OCT-2001
Last Revision Date: 01-OCT-2003
goal: How to copy an Oracle database to another machine
fact: Oracle Server - Enterprise Edition
fix:
Pre-requisites: The copy is between 2 machines, both have to be on the same OS
and have to have exactly the same database version installed.
1. Make sure the database you want to copy was closed with a SHUTDOWN IMMEDIATE,
SHUTDOWN NORMAL or SHUTDOWN TRANSACTIONAL.
2. Copy init.ora and control files to create instance and be able to go in
mount mode. Check the init.ora for the locations where the controlfiles have
to be, if those locations are not valid on the machine put the control files on
different places and adjust the init.ora accordingly.
3.a. Copy the datafiles (all of them).
b. Copy the redo-logfiles (all of them).
4.a. (Unix only) Set the environment variables:
ORACLE_SID - set to the database name you wish to create
ORACLE_HOME - set to full pathname of the Oracle system home directory
PATH - needs to include $ORACLE_HOME/bin
b. (NT/2000 only) Do 'set ORACLE_SID=<SID>'
Use oradim to create the service for the instance. For more information
on oradim please refer to (the part that refers to creating a new instance):
Note:68720.1 Creating a new 7.3, 8.0, 8.1 Instance/Database
5. Use servermanager (check the name to use for your version of oracle) or
sqlplus (version 9i and above) to startup the database in mount mode.
Do
CONNECT INTERNAL/<PASSWORD>
then
STARTUP MOUNT
Then do a rename of the copied datafiles if they are not in the same path as on
the other machine. For all the files that are in the result of the query:
SELECT NAME FROM V$DATAFILE;
do
ALTER DATABASE RENAME FILE '<oldfullpath>\<filename>' to <
newfullpath>\<filename>';
6. Query the datadictionary for the old location of the redolog files using:
SELECT MEMBER FROM V$LOGFILE;
If the new place is not the same as the old do:
ALTER DATABASE RENAME FILE '<oldfullpath>\<redologfilename>' to &
lt;newfullpath>\<redologfilename>';
7. Now open the database:
ALTER DATBASE OPEN;
******************************************************************

Steps to export and import oracle 10g databse from AIX to AIX and LINUX

Hi,
I need the steps to export the oracle 10g database from AIX server to AIX server and LINUX server.
Please give me all the steps as this is my first exort an import activity.
thanks,

For 10g there exist two ways to do so.
1) Regular exp/imp.
2) Data pump expdp/impdp.
As this is your first export and import activity, relevant concept understanding is mandatory for you.
Documentation Link
http://download-east.oracle.com/docs/cd/B19306_01/server.102/b14215/toc.htm
Read the chapters 1,2,3 (Data pump expdp/impdp) and 19 (regular exp/imp). Good luck.

Export and import the internal table

Hi,
Could you explain the total internal table data how we export and import please give me example.
Thanks,
Hari

Hi,
Check this thread..
exporting internal table to memory variable

How to export Tabel? (Exporting and Importing of RFCDES table)

Hi,
We are doing system Refresh on qualitysystem,
I want to export the Tables and reimport them after system refresh
Tables like: RFCDES
How can export this table ?
How to import the table?
It is very urgent, Please give me the solution as soon as possible
Note: we are using BRTOOLS
Points awarded
Regards,
Ravi

Hi Ravi,
Create a control file like "rfcdes_export.ctl"
export
file '/usr/sap/data/export_rfc.dat
delete from rfcdes
select * from rfcdes
Take the export :
R3trans -w rfcdes_export.log rfcdes_export.ctl
Create the control file "rfc_import.ctl"
import
file '/usr/sap/data/export_rfc.dat'
Import it:
R3trans -w rfc_import.log -u 1268 rfc_import.ctl
Hope it will help you.
Best Wishes.
Kumar

Reg. Particulare table export and import the same table

Dear Sir
I am MM consultant, I would like to export only one table and import the same after some request released,how to do this. Please help me.
I am working in Oracle 10.2.0.2.0 release
Thanks in advance
Rajakumar.K

Hello Raja,
you want to export some table, perform some changes on the system (releasing a transport) and then reimport the old state of the table? This sounds like a very bad idea. You are inviting desaster and compromise the consistency of your system.
Go to http://help.sap.com chose your release and enter the search term brspace to find out
supported ways to reorganize a table.
Regards,
Mark

Export and Import Files in Table in JDeveloper11g

Hi Every body,
I have to make a functionality in my project like Export any af:table data in Different file format like XML,*CSV*,*XLS*,*TXT*. and also Import these files in to af:Table. Can anybody suggest me, What to do? How can i do this? Is there any sample example to achieve this?
Thanks,
Fizzz...

Hi John,
This is a really good component to export table data in Excel file on one click. Thank you very much.
Now i'am looking for Upload excel to table and with other file format too like XML,CSV and TXT.
thanks john
fizzz...

Cmd for exp and importing all the table data's in a specified schema

i need to export table data without exporting the defenition how can i do this

Why do you have such a requirement?
Are you worried about import failures if the object already exists on the database?

Export and import oracle xe application users

How can i import a user'sexport script using sqlplus?
i make a export with application->export->users to a file exportuser.sql
but when i'm try to import with sqlplus i get
ORA-20001: Unauthorized access (wwv_flow_api.set_credentials).
I need to make a silence creation of users using sqlplus, (not by htmldb), any idea?

Hello
Have a look on HTMLDB_UTIL.EXPORT_USERS - How this works?
For me it works. Import works fine.
Compare your file with the output from my command and check for differences...
Greetings
Sven

How to export and import a document library data to a new sharepoint farm

Hi
i have a sharepoint 2010 farm and has one sharepoint web application
in this application it has a document library and this doc library has a 2000 folders and each folder has 2500 documents
, here i how i export upto 500 folders from this doc library to a new sharepoint farm
adil

if your both farm are on same version level then you can use export & import funcation if only Document library required.
Perform export on source farm
Export a site, list, or document library in SharePoint Server 2010
copy the files to target farm and run the import.
Import a list or document library in SharePoint Server 2010
another way is backup the site collection from source and restore it to destination.
for backup: http://technet.microsoft.com/en-us/library/ee748617(v=office.14).aspxFor
restore: http://technet.microsoft.com/en-us/library/ee748655(v=office.14).aspx
there is always 3rd party tool options.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

EXPORT AND IMPORT MEMORY COMMAND

Hi Experts,
I AM FACING PROBLEM TO EXPORT VALUES FROM INTERNAL TABLE OF ONE TRANSACTION TO ANOTHER TRANSACTION AND IMPORT THOSE INTERNAL TABLE DATA. HOW TO RESOLVE THE ISSUE.
THANKS
BalaNarasimman.

Hi,
Here are the documents which you can use for the syntax
Export
[http://www.s001.org/ABAP-Hlp/abapexport_data_cluster.htm]
Import:-
[http://www.sts.tu-harburg.de/teaching/sap_r3/ABAP4/import01.htm]

Export and import of data not table and data ????

hii brothers and sister
plz i have a a quetion about Export and import of data in oracle forms
i have created 02 boutons one for export his trigger like this :
eclare
alrt number;
v_directory varchar2(200) := 'c:\backup'; --- that if the C Drive not the Drive that the windows had installed in it.
path varchar2(100):='back_up'
||to_char(sysdate,'dd_mm_yyyy-hh24_mi_ss');
v_exp varchar2(200) := 'exp hamada/hamada2013@orcl file = '
||v_directory
||'\'
||path
||'.dmp';
begin
host(v_exp);
alrt:=show_alert('MSG');
end;
and the bouton import is like this
declare
alrt number ;
v_ixp varchar2(200) := 'imp userid=hamada/hamada2013@orcl file =c:\backup2\back.dmp full=yes';
begin
host(v_ixp);
alrt:=show_alert('MSG');
ref_list;
end;
i have just one table "phone"
this code is correct he expot not only the data but also the creation of the table ....for exemple i do export and evry thing is good until now and i find the .dmp in the folder backup .. but when i deleted all data from my app and try to import this .dmp iit show me error it tell me thet the table phone is already created ....
so plz help wanna just export the data of phone not the creation of table and data ???? or how can i import just the data from this .dmp ??

Pl post OS and database versions.
You will likely need to use the IGNORE flag - http://docs.oracle.com/cd/E11882_01/server.112/e22490/original_import.htm#sthref2201
Imp utility (by default) will try and create the table first. Since the table already exists, imp reports an error. Use the IGNORE flag in your imp command to not report such errors.
HTH
Srini

Export and import table data with Java

I need a library for simple exporting and importing table data.
The data should be exported to a SQL file with insert statements.
I just want to tell the library the table name, the connection and where to store the file. The usage should be very simple.
Are there any small libraries for this? Finished calsses and methods which I can just call?

I need a library for simple exporting and importing
table data.
The data should be exported to a SQL file with insert
statements.Every database has utilities to export/import data from tables. Take a look at your database manual.

To export and import oracle 11g table data only

Similar Messages

Maybe you are looking for