ABAP dump on entering into IC

Hi,
One user faces a very strange issue where she faces a dump on just entering CRM 7.0 IC application. The runtime error she faced on investigating in st22 was BCD_OVERFLOW where there is an overflow during an arithmetic operation.
Class -> CL_ABAP_TSTMP
Method -> SUBTRACT.
It was terminated at line 25.
On further analysis, we found that this method is used to convert two timestamps into seconds and subtract one from the other
It is called by CL_CMW_PIF > GETSESSIONDETAILS.
In this method the user's sessions details are being calculated. In Line 15, the GET TIME STAMP FIELD returns the user's timestamp. The parameters tstmp1 (local timestamp) and tstmp2 (session-timestamp) are exported to CL_ABAP_TSTMP => SUBTRACT.
This subtraction operation is leading to an overflow error where one of the timestamp fields (of type P) is being provided a resultant value that exceeds its storage limit.
Initially the user was asked to remove the personal time zone in su01 but this did not help either.
The user just entered the URL into the Address bar and faced the runtime error immediately. Could anyone provide pointers on these.
Thanks,
Reba

Hi Harshit,
The forum thread pointed to the query in the BI system. Im aware of the dump and the solution. It occurs in a SAP standard program and therefore the variabel cannot be changed. However this problem is faced by only one user. What settings of the user needs to be changed to prevent this overflow.
Reba.

Similar Messages

GR55 Report / Abap Dump

Hello,
I'm working on issue where I have two users who are executing the same transaction but getting back different results. One users gets back the output of the report another gets back an abap run time errror.
The run time error for short text reads, " Time limit exceeded"
I thought this was due to missing authorization however I ruled this out when I tried running this report under my profile that has sap_all & sap_new and got an abap dump error indicating time limit exceeded.
The transaction i'm running is GR55, once there I choose the report group. Next screen i enter in the year and period. I using period 1 which is one month of data and I still get the dump. The user who can run this report goes up to 9 periods and gets an output every time.
I can run this same report in our Q/A without any issues. I pulled the dump in ST22 and from reading it appears the paremeter for rdisp/max_wprun_time is set to 1200 secs and when I run this report i'm exceeding 1200secs which triggers the dump.
This all make sense however I don't understand how one user doesn't run into the same issue and one does.

GR55 is not performance optimized coding. It is only "best guess coding"...
Your production system might have more data (or even other config, if there are inconsistencies...).
Additionally, the load balancing is might be different (with the server instances having different instance profiles)?
If the user has the ability to schedule jobs with different priorities in PRD, then this can also have an effect.
I dont think this is security related (does not make sense, unless the ABAPers did something stupid...) so I take the liberty of moving it to the NW Admin forum...
Cheers,
Julius

ABAP dump analysis

HI all
Pl let me know ABAP Dump analysis .which type of abap dump problems arrived every time. pl explain explain more than two or three examples recently u face abap dumps and solutions hoe u resolved that problems
[removed by moderator]
I really appreciate your feed back on this request
Thanks
Hari

hi
Dump Analysis
A dump analysis is a comprehensive list that should enable you to identify the causes and possible solutions of program errors. The ABAP Workbench generates a short dump whenever a report or transaction terminates due to a serious error. The system enters the error in the system log and writes a snapshot of the program at the moment when it terminated into a special database table called SNAP.
Dump analyses give the user or programmer information about the causes of the error that has caused the program to terminate. Experienced users can use them to identify very quickly where and why this occurred. He or she can them solve the problem.

The snapshot contains the following information:
Why the program has terminated
What caused the program termination
Where in the program code the termination occurred
What you can do to correct the error
The values of the relevant system fields when the program terminated
The calls or events that were active when the program terminated
Any other programs that are affected.
In Basis 6.20, you can also reorganize short dumps from within ST22 via menu option Goto->Reorganize but I'm not sure if that exists in 4.6C. This option allows you to specify a different retention period for the short dumps. You would need to use this manual reorganization process in place of the batch version.
If there is requirement for you to keep some of your ABAP short dumps there is also an option in ST22 to allow you to keep them indefinately. When you see the list of dumps, you simply cursor select the required
dump(s0 and select menu option Short dump->Keep. Kept short dumps are not subject to reorganization until they are released again.
regards
ravish
plz dont forget to reward points if helpful

Cheque Printing Abap Dumps

Dear All Gurrus
i am facing an Abap Dump when user send cheque Printing .other document printing are Ok .please see this error
Runtime errors LOAD_PROGRAM_NOT_FOUND
 Occurred on 04.06.2007 at 16:18:50
Program " " not found.
What happened?
There are several possible reasons for the error:
or
The current ABAP program had to be terminated because the
ABAP processor detected an internal system error.
The current ABAP program "SAPLF028" had to be terminated because the ABAP
processor discovered an invalid system state.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
On account of a branch in the program
(CALL FUNCTION/DIALOG, external PERFORM, SUBMIT)
or a transaction call, another ABAP/4 program
is to be loaded, namely " ".
However, program " " does not exist in the library.
Possible reasons:
a) Wrong program name specified in an external PERFORM or
 SUBMIT or, when defining a new transaction, a new
 dialog module or a new function module.
b) Transport error
b) Transport error
How to correct the error
Check the last transports to the R/3 System.
Are changes currently being made to the program "SAPLF028"?
Has the correct program been entered in table TSTC for Transaction "FBZ4 "?
 You may able to find an interim solution to the problem
in the SAP note system. If you have access to the note system yourself,
use the following search criteria:
"LOAD_PROGRAM_NOT_FOUND" C
"SAPLF028" or "LF028U06"
"PAYMENT_FORM_PRINT"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
 2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
System environment
SAP Release.............. "620"
Application server....... "PKSAPT10"
Network address.......... "184.208.96.235"
Operating system......... "Windows NT"
Release.................. "5.0"
Hardware type............ "4x Intel 801586"
Character length......... 8 Bits
Pointer length........... 32 Bits
Work process number...... 0
Short dump setting....... "full"
Database server.......... "PKSAPT10"
Database type............ "MSSQL"
Database name............ "T10"
Database owner........... "t10"
Character set............ "English_United State"
SAP kernel............... "640"
Created on............... "Oct 29 2006 23:44:46"
Created in............... "NT 5.0 2195 Service Pack 4 x86 MS VC++ 13.10"
Database version......... "SQL_Server_8.00 "
Patch level.............. "155"
Patch text............... " "
Supported environment....
Database................. "MSSQL 7.00.699 or higher, MSSQL 8.00.194"
SAP database version..... "640"
Operating system......... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2"
User, transaction...
Client.............. 210
User................ "AGHAZNAVI"
Language key........ "E"
Transaction......... "FBZ4 "
Program............. "SAPLF028"
Screen.............. "SAPMF05A 0700"
Screen line......... 43
Information on where terminated
The termination occurred in the ABAP program "SAPLF028" in
"PAYMENT_FORM_PRINT".
The main program was "SAPMF05A ".
The termination occurred in line 332 of the source code of the (Include)
program "LF028U06"
of the source code of program "LF028U06" (when calling the editor 3320).
Source code extract
003020 IF sy-subrc NE 0 "bei nicht in PAYR vorhandenen o.
003030 AND payr-vblnr EQ reguh-vblnr. "durch FCH7 (Scheck neu drucken)
003040 opayf-pstap = 0. "in Auftrag gegebene Schecks wird
003050 ELSE. "der Stapel mitgegeben, sonst die
003060 CLEAR payr. "Restart-Schecknummer aus PAYR
003070 ENDIF.
003080
003090 IF t042z-formi IS INITIAL. "alte Zahlungsträger (nur Scheck)
003100 SUBMIT (t042z-progn) WITH zw_laufd = reguh-laufd
003110 WITH zw_laufi = reguh-laufi
003120 WITH zw_zbukr = reguh-zbukr
003130 WITH zw_xvorl = space
003140 WITH sel_zawe = i_opayf-rzawe
003150 WITH par_zdru = 'X'
003160 WITH par_priz = i_opayf-ppriz
003170 WITH par_zfor = i_opayf-pzfor
003180 WITH par_avis = i_opayf-pavis
003190 WITH par_pria = i_opayf-ppria
003200 WITH par_stap = i_opayf-pstap
003210 WITH par_rchk = payr-chect
003220 WITH par_begl = space
003230 WITH sel_hbki = reguh-hbkid
003240 WITH sel_hkti = reguh-hktid
003250 WITH par_anzp = par_anzp
003260 WITH par_fill = i_opayf-pfill
003270 WITH par_espr = i_opayf-pespr
003280 WITH par_isoc = i_opayf-pisoc
003290 WITH par_sofo = i_opayf-psofo
003300 WITH par_novo = i_opayf-xnovo
003310 AND RETURN.
 ELSE. "neue Zahlungsträger (z.Zt. nur OFX)
003330 CALL FUNCTION 'PAYMENT_MEDIUM_ONLINE'
003340 EXPORTING
003350 im_formi = t042z-formi
003360 im_reguh = reguh
003370 im_opayf = i_opayf
003380 TABLES
003390 tb_regup = xregup.
003400 ENDIF.
003410
003420 ENDFUNCTION.
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 4 SY-INDEX 0
SY-TABIX 1 SY-DBCNT 1
SY-FDPOS 0 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1 SY-PFKEY UAN
SY-UCOMM BU
SY-TITLE Payment with Printout: Display Overview
SY-MSGTY I SY-MSGID F5
SY-MSGNO 312 SY-MSGV1 1500000011
SY-MSGV2 KOPK SY-MSGV3
SY-MSGV4
Active calls / events
No.... Type........ Name..........................
 Program
 Include Line
 Class
 4 FUNCTION PAYMENT_FORM_PRINT
 SAPLF028
 LF028U06 332
 3 FORM FCODE_BEARBEITUNG
 SAPMF05A
 MF05AFF0_FCODE_BEARBEITUNG 2333
 2 FORM FUSSZEILE_VERARBEITEN
 SAPMF05A
 MF05AFF0_FUSSZEILE_VERARBEITEN 148
 1 MODULE (PAI) FUSSZEILE_BEARBEITEN
 SAPMF05A
 MF05AI00_FUSSZEILE_BEARBEITEN 46
Chosen variables
 4 FUNCTION PAYMENT_FORM_PRINT
 SAPLF028
 LF028U06 332
I_CC_CURR PKR
 54522
 0B200
I_OPAYF KOPKLOCL 0002 XCCIT
 4454444422222222222222222222233332254445
 BF0BCF3C00000000000000000000000020083394
... + 40 IH X 0001000005
 4422522222222222333333333322222222222222
 9800800000000000000100000500000000000000
... + 80
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 120 00000000000000
 2222222222222222222222233333333333333
 0000000000000000000000000000000000000
I_REPRI
2
 0
I_VBLNR 1500000011
 3333333333
 1500000011
I_WWERT 20070604
 33333333
 20070604
REGUH-LAUFI 00001*
 333332
 00001A
<%_TABLE_LFA1> ???
REGUH-ZBUKR KOPK
 4454
 BF0B
I_OPAYF-RZAWE C
 4
 3
I_OPAYF-PPRIZ LOCL
 4444
 CF3C
I_OPAYF-PZFOR
2222222222222222
 0000000000000000
I_OPAYF-PAVIS
2
 0
I_OPAYF-PPRIA
2222
 0000
I_OPAYF-PSTAP 0002
 3333
 0002
PAYR-CHECT
2222222222222
 0000000000000
REGUH-HBKID CITIH
 44544
 39498
REGUH-HKTID CTOLH
 45444
 34FC8
PAR_ANZP 0
 3
 0
I_OPAYF-PFILL
2
 0
I_OPAYF-PESPR
2
 0
I_OPAYF-PISOC
2
 0
I_OPAYF-PSOFO X
 5
 8
I_OPAYF-XNOVO
2
 0
%_PRINT 000
 2222333222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 80 0 ########
 2222222222320000000022222222222222222222
 0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 160 0 ####
 222222222222223222222222222222220000
 000000000000000000000000000000000000
KNBK-KOINH
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 40
22222222222222222222
 00000000000000000000
T042Z-FORMI
222222222222222222222222222222
 000000000000000000000000000000
<%_TABLE_T012> ???
REGUH 2007060400001* KOPK0001000005
 2223333333333333224454333333333322222222
 0002007060400001A0BF0B000100000500000000
... + 40 1500000011 PKR LHP1Co
 2222222222222222223333333333254522445346
 000000000000000000150000001100B200C8013F
... + 80 mpany Supreme Gas Ind. Pvt. Ltd
 6766722222222577766624672466225772247622
 D01E90000000035025D5071309E4E0064E0C4400
... + 120
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 240 Lahore
 222466676222222
 000C18F25000000
SYST-REPID SAPLF028
 5454433322222222222222222222222222222222
 310C602800000000000000000000000000000000
T042I-HBKID CITIH
 44544
 39498
XREGUP[] Table IT_1065[1x1184]
 3 FORM FCODE_BEARBEITUNG
 SAPMF05A
 MF05AFF0_FCODE_BEARBEITUNG 2333
%_SPACE
2
 0
RC 0
 0000
 0000
SYST-REPID SAPMF05A
 5454433422222222222222222222222222222222
 310D605100000000000000000000000000000000
SY-REPID SAPMF05A
 5454433422222222222222222222222222222222
 310D605100000000000000000000000000000000
VORSCHL_GRIRG
222
 000
XBKPF-BELNR 1500000011
 3333333333
 1500000011
%_DUMMY$$
2222
 0000
VAKTAB
222222222222222222222222222222
 000000000000000000000000000000
XBKPF-BUKRS KOPK
 4454
 BF0B
VORSCHL_GITYP
22
 00
XBKPF-GJAHR 2007
 3333
 2007
C_INFO_LINK 100
 333
 100
BKPF 210KOPK15000000112007KZ20070604200706040
 3334454333333333333334533333333333333333
 210BF0B15000000112007BA20070604200706040
... + 40 620070604161846000000000000000020070604A
 3333333333333333333333333333333333333334
 6200706041618460000000000000000200706041
... + 80 GHAZNAVI FBZ4
 4445445422244532222222222222222222222222
 781AE16900062A40000000000000000000000000
... + 120 12345
 2222222333332222222222222222222222222222
 0000000123450000000000000000000000000000
... + 160 0000 PKR ###
 2223333222222222222222222222222254522000
 000000000000000000000000000000000B200000
... + 200 ## ##### ####### RFBU
 0022222000002200000002544522222222222222
 0C000000000C00000000C0262500000000000000
... + 240
222222222222222
 000000000000000
BSEG 210KOPK15000000112007002 000000000000000
 3334454333333333333333332333333333333333
 210BF0B150000001120070020000000000000000
... + 40 0 25K SLHP1 ##########
 3222222222233422254453222222220001000000
 0000000000025B0003C80100000000000000C000
... + 80 ##################PKR #################
 1000000000000010005452200000000000000000
 000C000000C000000C0B200000000C000000C000
... + 120 #######################################
 0000000000000000000000000000000000000002
 000C000000C000000C000000C000000C000000C0
... + 160 000 ###############################
 2223332220000000000000000000000000000000
 000000000000000C0000C000000C000000C00000
... + 200 ##0000000020070427
 0033333333333333332222222222222222222222
 0C00000000200704270000000000000000000000
... + 240
222222222222222
 000000000000000
SY-SUBRC 4
 0000
 4000
%_ARCHIVE
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 240
222222222222222
 000000000000000
SAPOS-GITYP
22
 00
T001-WAERS PKR
 54522
 0B200
SAPOS-GRICD
22
 00
OPAYF KOPKLOCL 0002 XCCIT
 4454444422222222222222222222233332254445
 BF0BCF3C00000000000000000000000020083394
... + 40 IH X 0001000005
 4422522222222222333333333322222222222222
 9800800000000000000100000500000000000000
... + 80
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 120 00000000000000
 2222222222222222222222233333333333333
 0000000000000000000000000000000000000
SAPOS-GRIRG
222
 000
RF05A-KOATX
222222222222
 000000000000
BKPF-WWERT 20070604
 33333333
 20070604
SY-XFORM CONVERSION_EXIT
 444545544454545222222222222222
 3FE65239FEF5894000000000000000
SY-MSGID F5
 43222222222222222222
 65000000000000000000
ANL_HKONT
2222222222
 0000000000
T001W
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 40
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 80
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 120
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 160
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 200
2222222222222222222222222222222222222222
 0000000000000000000000000000000000000000
... + 240 #
 222222222222220
 000000000000000
SPACE
2
 0
SY-MSGNO 312
 333

Specification of form is missing in pmnt method C for comp.code KOPK
In the include program RFFORI01 the query "SELECT * FROM t042z WHERE land1 EQ t001-land1 AND zlsch IN sel_zawe AND progn EQ sy-repid" is returning a null value for progn. This null value is passed to "003100 SUBMIT (t042z-progn) WITH zw_laufd = reguh-laufd" (Refer to the short dump).
Refer to IMG for adding specification of form.
Regards,
Khalid Mustafa
Development Consultant Netweaver-ABAP

ABAP Dump while doing total(summing up)

Hello Experts
I have a report:
This program reads Sales Order and Delivery information. When i tried to sum the Order Quantity, an ABAP Dump is coming. Can anyone help me in correcting my Code?
Program looks like following and DUMP follows.
Global data declaration
TYPE-POOLS: slis.
TABLES: vbap, vbrk, vbfa, vbak, vbrp, konv, kna1, bkpf, bsad, bkpf_bsad,
knvv, pa0002, t005u, mvke, lips, likp, vbpa, vbep.
DATA: BEGIN OF i_list OCCURS 0,
 vbeln LIKE vbak-vbeln,
 posnr LIKE vbap-posnr,
 etenr like vbep-etenr,
 matnr LIKE vbap-matnr,
 erdat LIKE vbap-erdat,
 mvgr1 LIKE mvke-mvgr1,
 wadat_ist LIKE likp-wadat_ist,
 days TYPE i,
 werks LIKE vbap-werks,
 lgort LIKE vbap-lgort,
 kwmeng LIKE vbap-kwmeng," CH01+
 lfimg LIKE lips-lfimg," CH01+
 pstyv LIKE vbap-pstyv," CH01+
 obd LIKE lips-vbeln," CH01+
 obd_pos LIKE lips-posnr," CH01+
 soldto LIKE vbaK-kunnr," JR+
 shipto LIKE vbpa-kunnr," JR+
 edatu like vbep-edatu," PR+
 END OF i_list.
DATA: i_list2 LIKE i_list OCCURS 0 WITH HEADER LINE,
 i_list3 LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: i_list4 LIKE vbap OCCURS 0 WITH HEADER LINE.
*ALV Output Header
DATA: gt_list_top_of_page TYPE slis_t_listheader,
 prognm LIKE sy-repid,
 gc_formname_top_of_page TYPE slis_formname VALUE 'TOP_OF_PAGE',
 gt_events TYPE slis_t_event,
 is_layout TYPE slis_layout_alv,
 is_variant LIKE disvariant,
 it_sort TYPE slis_t_sortinfo_alv WITH HEADER LINE.
DATA:gt_fieldcat TYPE slis_t_fieldcat_alv.
DATA:gt_outtab LIKE i_list OCCURS 0 WITH HEADER LINE.
DATA: g_repid LIKE sy-repid,
 g_count LIKE sy-tabix.
SELECTION-SCREEN BEGIN OF BLOCK block0 WITH FRAME TITLE text-t01.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t10.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t11.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN: BEGIN OF LINE.
SELECTION-SCREEN COMMENT 1(79) text-t12.
SELECTION-SCREEN: END OF LINE.
SELECTION-SCREEN END OF BLOCK block0.
*/ Selection and Input Parameters
SELECTION-SCREEN BEGIN OF BLOCK blocko WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_vbeln FOR vbap-vbeln, "SO
 s_auart FOR vbak-auart DEFAULT 'KB' OBLIGATORY,
 s_matnr FOR vbap-matnr," obligatory,
 s_mvgr1 FOR mvke-mvgr1,
 s_erdat FOR vbap-erdat OBLIGATORY,
 s_werks FOR vbap-werks,
 s_lgort FOR vbap-lgort,
 s_edatu FOR vbep-edatu.
PARAMETERS: p_vkorg LIKE vbak-vkorg DEFAULT '5010'.
SELECTION-SCREEN SKIP 2.
+EC1
Addition +EC1
+EC1
PARAMETERS: p_vari LIKE disvariant-variant.
+EC1
End Addition +EC1
+EC1
SELECTION-SCREEN END OF BLOCK blocko.
+EC1
Addition +EC1
+EC1
DATA: g_save(1) TYPE c,
 g_default(1) TYPE c,
 g_exit(1) TYPE c,
 gx_variant LIKE disvariant,
 g_variant LIKE disvariant.
+EC1
End Addition +EC1
+EC1
Initialization fieldcatalog
INITIALIZATION.
PERFORM clear_tables.
g_repid = sy-repid.
PERFORM fieldcat_init USING gt_fieldcat[].
+EC1
Addition +EC1
+EC1
g_save = 'A'.
PERFORM variant_init.
Get default variant
gx_variant = g_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_DEFAULT_GET'
 EXPORTING
 i_save = g_save
 CHANGING
 cs_variant = gx_variant
 EXCEPTIONS
 not_found = 2.
IF sy-subrc = 0.
 p_vari = gx_variant-variant.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_vari.
PERFORM f4_for_variant.
AT SELECTION-SCREEN.
PERFORM auth_check. "+ESC
PERFORM pai_of_selection_screen.
+EC1
End Addition +EC1
+EC1
START-OF-SELECTION.
PERFORM get_data.
PERFORM alv.
END-OF-SELECTION.
 FORM get_data *
FORM get_data.
*CH01 - Added kwmeng(order qty) to selection, excluded rejects
*JR -added soldto and shipto code
SELECT avbeln aposnr amatnr aerdat awerks algort
 akwmeng apstyv bkunnr cedatu
CH01+
INTO
(i_list-vbeln, i_list-posnr, i_list-matnr, i_list-erdat, i_list-werks,
i_list-lgort,
i_list-kwmeng , i_list-pstyv, i_list-soldto,i_list-edatu)
 CH01+
FROM vbap AS a INNER JOIN vbak AS b ON avbeln = bvbeln
 INNER JOIN vbep AS c ON avbeln = cvbeln
WHERE b~vkorg = p_vkorg
AND a~werks IN s_werks
AND a~lgort IN s_lgort
AND b~auart IN s_auart
AND a~vbeln IN s_vbeln
AND a~erdat IN s_erdat
AND a~abgru = ''" CH01+
AND a~matnr IN s_matnr
AND c~edatu IN s_edatu.
 APPEND i_list.
ENDSELECT.
COMMIT WORK AND WAIT.
SORT i_list BY VBELN POSNR EDATU.
DELETE ADJACENT DUPLICATES FROM i_list COMPARING vbeln posnr.
LOOP AT i_list.
 SELECT SINGLE mvgr1 INTO i_list-mvgr1 FROM mvke
 WHERE matnr = i_list-matnr.
 MODIFY i_list.
 CLEAR: i_list.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
 IF i_list-mvgr1 IN s_mvgr1.
 CONTINUE.
 ELSE.
 DELETE i_list.
 COMMIT WORK AND WAIT.
 ENDIF.
ENDLOOP.
CH01 - commented these lines out and redid logic below
LOOP AT i_list.
 select single vbeln into lips-vbeln from lips
 where vgbel = i_list-vbeln
 and vgpos = i_list-posnr.
 select single wadat_ist into i_list-wadat_ist from likp
 where vbeln = lips-vbeln.
 SELECT b~wadat_ist INTO i_list-wadat_ist
 FROM lips AS a INNER JOIN
 likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
 AND a~vgpos = i_list-posnr.
 MODIFY i_list.
 CLEAR: i_list, lips-vbeln.
 ENDSELECT.
ENDLOOP.
CH01 - Changed to select multiple delivery lines & del qty
summing the total deliveries per OBD# and date
LOOP AT i_list.
 SELECT avbeln sum( alfimg ) b~wadat_ist
 INTO (i_list-obd , i_list-lfimg , i_list-wadat_ist)
 FROM lips AS a INNER JOIN
 likp AS b ON avbeln = bvbeln WHERE a~vgbel = i_list-vbeln
 AND a~vgpos = i_list-posnr
 AND a~pstyv = i_list-pstyv
 group by avbeln bwadat_ist.
 i_list2 = i_list.
 APPEND i_list2.
 ENDSELECT.
 IF sy-subrc <> 0.
 i_list2 = i_list.
 APPEND i_list2.
 ENDIF.
ENDLOOP.
i_list[] = i_list2[].
*End CH01
COMMIT WORK AND WAIT.
LOOP AT i_list.
 IF i_list-wadat_ist IS INITIAL.
 CONTINUE.
 ELSE.
 i_list-days = i_list-wadat_ist - i_list-erdat.
 ENDIF.
 MODIFY i_list.
 CLEAR: i_list.
 COMMIT WORK AND WAIT.
ENDLOOP.
COMMIT WORK AND WAIT.
LOOP AT i_list.
 IF i_list-vbeln IS INITIAL.
 DELETE i_list.
 ENDIF.
ENDLOOP.
COMMIT WORK AND WAIT.
*JR
LOOP AT i_list.
 SELECT SINGLE KUNNR INTO i_list-shipto FROM vbpa
 WHERE vbeln = i_list-vbeln
 AND parvw = 'WE'.
 MODIFY i_list.
ENDLOOP.
*END JR
gt_outtab[] = i_list[].
COMMIT WORK AND WAIT.
ENDFORM.
 FORM alv *
FORM alv.
PERFORM e03_eventtab_build USING gt_events[]. "+EC1
PERFORM e04_comment_build USING gt_list_top_of_page[]. "+EC1
prognm = sy-repid. "+EC1
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
 EXPORTING
 i_callback_user_command = 'USER_COMMAND'
 i_callback_program = g_repid
 it_fieldcat = gt_fieldcat[]
 it_events = gt_events[] "+ESC
 it_sort = it_sort[]
+EC1
Addition +EC1
+EC1
 is_variant = g_variant
 i_save = g_save
+EC1
End Addition +EC1
+EC1
 TABLES
 t_outtab = gt_outtab.
COMMIT WORK AND WAIT.
ENDFORM.
 FORM fieldcat_init *
--> I_FIELDCAT *
FORM fieldcat_init
 USING i_fieldcat TYPE slis_t_fieldcat_alv.
DATA: ls_fieldcat TYPE slis_fieldcat_alv.
DATA: pos TYPE i VALUE 1.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'VBELN'.
ls_fieldcat-ref_tabname = 'VBAK'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'POSNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MATNR'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'MVGR1'.
ls_fieldcat-ref_tabname = 'MVKE'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WERKS'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LGORT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ERDAT'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'WADAT_IST'.
ls_fieldcat-ref_tabname = 'LIKP'.
ls_fieldcat-key = 'X'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'DAYS'.
ls_fieldcat-ref_fieldname = 'DAYS'.
ls_fieldcat-seltext_s = '# Of Days'.
ls_fieldcat-seltext_m = '# Of Days'.
ls_fieldcat-seltext_l = '# Of Days'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*Begin CH01
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'KWMENG'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'LFIMG'.
ls_fieldcat-ref_tabname = 'LIPS'.
ls_fieldcat-outputlen = 7.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD'.
ls_fieldcat-seltext_s = 'OBD'.
ls_fieldcat-seltext_m = 'Outbound Del'.
ls_fieldcat-seltext_l = 'Outbound Delivery'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'OBD_POS'.
ls_fieldcat-seltext_s = 'OBD Ln'.
ls_fieldcat-seltext_m = 'Outbound Del Ln'.
ls_fieldcat-seltext_l = 'Outbound Del Line'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*End CH01
*JR
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SOLDTO'.
ls_fieldcat-ref_tabname = 'VBAP'.
ls_fieldcat-seltext_m = 'Sold To'.
ls_fieldcat-seltext_l = 'Sold To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'SHIPTO'.
ls_fieldcat-ref_tabname = 'VBPA'.
ls_fieldcat-seltext_m = 'Ship To'.
ls_fieldcat-seltext_l = 'Ship To'.
ls_fieldcat-outputlen = 10.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'ETERN'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Schedule line number'.
ls_fieldcat-seltext_l = 'Schedule line number'.
ls_fieldcat-key = 'Schedule line number'.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*END JR
pos = pos + 1.
ls_fieldcat-col_pos = pos.
ls_fieldcat-fieldname = 'EDATU'.
ls_fieldcat-ref_tabname = 'VBEP'.
ls_fieldcat-seltext_m = 'Requested Delivery date'.
ls_fieldcat-seltext_l = 'Requested Delivery date'.
ls_fieldcat-outputlen = 20.
APPEND ls_fieldcat TO i_fieldcat.
CLEAR ls_fieldcat.
*FOR ALV SORT & SUBTOTAL
CLEAR it_sort.
it_sort-spos = '0'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'POSNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '2'.
it_sort-fieldname = 'MATNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '3'.
it_sort-fieldname = 'MVGR1'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '4'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '5'.
it_sort-fieldname = 'WADAT_IST'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-down = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '6'.
it_sort-fieldname = 'PERNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '7'.
it_sort-fieldname = 'VORNA'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '8'.
it_sort-fieldname = 'NACHN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '9'.
it_sort-fieldname = 'VKGRP'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '10'.
it_sort-fieldname = 'VBELN'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '11'.
it_sort-fieldname = 'ERDAT'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
CLEAR it_sort.
it_sort-spos = '12'.
it_sort-fieldname = 'BEZEI'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
it_sort-subtot = 'X'.
APPEND it_sort.
clear it_sort.
it_sort-spos = '1'.
it_sort-fieldname = 'BELNR'.
it_sort-tabname = 'GT_OUTTAB'.
it_sort-up = 'X'.
append it_sort.
ENDFORM.
+EC1
Addition +EC1
+EC1
*& Form VARIANT_INIT
 text
--> p1 text
<-- p2 text
FORM variant_init.
CLEAR g_variant.
g_variant-report = g_repid.
ENDFORM. " VARIANT_INIT
 FORM f4_for_variant *
FORM f4_for_variant.
CALL FUNCTION 'REUSE_ALV_VARIANT_F4'
 EXPORTING
 is_variant = g_variant
 i_save = g_save
 it_default_fieldcat =
 IMPORTING
 e_exit = g_exit
 es_variant = gx_variant
 EXCEPTIONS
 not_found = 2.
IF sy-subrc = 2.
 MESSAGE ID sy-msgid TYPE 'S' NUMBER sy-msgno
 WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ELSE.
 IF g_exit = space.
 p_vari = gx_variant-variant.
 ENDIF.
ENDIF.
ENDFORM.
*& Form PAI_OF_SELECTION_SCREEN
 text
FORM pai_of_selection_screen.
IF NOT p_vari IS INITIAL.
 MOVE g_variant TO gx_variant.
 MOVE p_vari TO gx_variant-variant.
 CALL FUNCTION 'REUSE_ALV_VARIANT_EXISTENCE'
 EXPORTING
 i_save = g_save
 CHANGING
 cs_variant = gx_variant.
 g_variant = gx_variant.
ELSE.
 PERFORM variant_init.
ENDIF.
ENDFORM. " PAI_OF_SELECTION_SCREEN
+EC1
End Addition +EC1
+EC1
 FORM e03_eventtab_build *
--> E03_LT_EVENTS *
FORM e03_eventtab_build USING e03_lt_events TYPE slis_t_event.
DATA: ls_event TYPE slis_alv_event.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
 EXPORTING
 i_list_type = 0
 IMPORTING
 et_events = e03_lt_events.
READ TABLE e03_lt_events WITH KEY name = slis_ev_top_of_page
 INTO ls_event.
IF sy-subrc = 0.
 MOVE gc_formname_top_of_page TO ls_event-form.
 APPEND ls_event TO e03_lt_events.
ENDIF.
ENDFORM.
 FORM e04_comment_build *
--> E04_LT_TOP_OF_PAGE *
FORM e04_comment_build USING e04_lt_top_of_page TYPE slis_t_listheader.
DATA: ls_line TYPE slis_listheader.
*Report Title
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = text-007.
APPEND ls_line TO e04_lt_top_of_page.
**Doc Type Desc.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-008.
ls_line-info = p_matnr.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-009.
ls_line-info = p_werks.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-010.
ls_line-info = p_stlan.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-011.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
clear ls_line.
ls_line-typ = 'S'.
ls_line-key = text-012.
ls_line-info = p_stlal.
append ls_line to e04_lt_top_of_page.
ENDFORM.
 FORM top_of_page *
FORM top_of_page.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
 EXPORTING
 it_list_commentary = gt_list_top_of_page.
ENDFORM.
 FORM auth_check *
FORM auth_check.
AUTHORITY-CHECK OBJECT 'V_VBAK_VKO'
 ID 'VKORG' FIELD p_vkorg.
IF sy-subrc NE 0.
 MESSAGE e054 WITH p_vkorg.
ENDIF.
ENDFORM. " auth_check
*& Form USER_COMMAND
FORM user_command USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE r_ucomm.
 WHEN '&IC1'.
 PERFORM display_so_order USING r_ucomm
 rs_selfield.
ENDCASE.
ENDFORM.
*& Form display_sales_order
 text
 -->P_R_UCOMM text
 -->P_RS_SELFIELD text
FORM display_so_order USING r_ucomm LIKE sy-ucomm
 rs_selfield TYPE slis_selfield.
CASE rs_selfield-sel_tab_field.
 WHEN '1-VBELN'.
 SET PARAMETER ID 'AUN' FIELD rs_selfield-value.
 CALL TRANSACTION 'VA03' AND SKIP FIRST SCREEN.
 WHEN '1-MATNR'.
 SET PARAMETER ID 'MAT' FIELD rs_selfield-value.
 CALL TRANSACTION 'MM03' AND SKIP FIRST SCREEN.
 WHEN '1-OBD'.
 SET PARAMETER ID 'VL' FIELD rs_selfield-value.
 CALL TRANSACTION 'VL03N' AND SKIP FIRST SCREEN.
 WHEN OTHERS.
 MESSAGE i000(z1) WITH 'Please Click on the Valid Selection'.
 EXIT.
ENDCASE.
ENDFORM. " display_sales_order
 FORM EDit_table *
-do_sum = 'C'.
009350 * save the actual grouplevel information
009360 gs_grouplevels = rs_grouplevels.
009370 clear g_lines.
009380
009390 * get number of lines of the collect table
009400 describe table rt_data lines g_lines.
009410 * if there is only one line or the field has no references so
009420 * that only the first line has to be considered
Contents of system fields
SY field contents..................... SY field contents.....................
SY-SUBRC 4 SY-INDEX 1
SY-TABIX 15 SY-DBCNT 1
SY-FDPOS 1 SY-LSIND 0
SY-PAGNO 0 SY-LINNO 1
SY-COLNO 1
Chosen variables
Name.......................... Contents.1........2........3....+....4
%_ARCHIVE
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 40
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 80
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 120
44444444
 0000000
-FIELDNAME ETERN
CECDD4444444444444444444444444
 535950000000000000000000000000
T_DATA 00004082920002000000 00
 FFFFFFFFFFFFFFFFFFFF444444444444444444FF
 0000408292000200000000000000000000000000
.. + 40 000000 00000000####### ########
 FFFFFF444FFFFFFFF00000004444444400000000
 000000000000000000000000000000000000000C
.. + 80 ####### 000000
 000000044444444444444FFFFFF4444444444444
 000000C000000000000000000000000000000000
.. + 120 00000000#
 4444444F
 0000000
S_DRAGDROP ####
 444444444444444444444444444444440000
 000000000000000000000000000000000000
 000000000000000000000000000000000000
SY-SUBRC 4
0000
 0004
SY-XPROG SAPCNVE
 ECDCDEC444444444444444444444444444444444
 2173555000000000000000000000000000000000
%_SPACE
0
0
SY-MSGID 0K
FD444444444444444444
 02000000000000000000
%_PRINT 000
 4444FFF444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 40
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 80 0 ########
 4444444444F40000000044444444444444444444
 0000000000000000000000000000000000000000
... + 120
44444444
 0000000
SY-MSGNO 000
 FFF
 000
 000
%_ITAB_MODIFY_LIST ###########################ø##Èø########
 0000000000000000000000000007007700000000
 0000000000000000000000004000004000000000
... + 40 ###################################Ø#²#0
 0001000100010000FFFF00000000020000083E0F
 0009000900090000FFFF04000002900000000A50
... + 80 ########################################
 0000000000000000000000000000000000000000
 0000000000000000000000000000000000000000
... + 120 ################################
 00000000
 0000000
SY-MSGV1
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 40
4444444444
 0000000000
SY-MSGV2
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
... + 40
4444444444
 0000000000
SY-MSGV3
4444444444444444444444444444444444444444
 0000000000000000000000000000000000000000
 0000000000000000000000000000000000000000
... + 40
4444444444


Hi Experts,
I tried with OUTPUT length, still Dump Persists, Any Ideas??
Source code extract on the dump is:
Thanks
SP
 008930 gs_roid-row_id = rs_row-index * -1.
008940 endif.
008950 gs_roid-sub_row_id = rs_row-rowtype+7(10).
008960 gs_poid-row_id = gs_roid-row_id.
008970 gs_poid-sub_row_id = gs_roid-sub_row_id.
008980 gs_poid-rowtype = rs_row-rowtype.
008990 gs_poid-index = rs_row-index.
009000 insert gs_poid into table rt_poid.
009010 endif.
009020 append gs_roid to rt_roid.
009030
009040 loop at rt_fieldcat assigning <ls_fieldcat>
where tech ne 'X' and
009050
no_out ne 'X'.
009060
009070 if gflg_invisible = 'X'.
009080 if <ls_fieldcat>-do_sum is initial.
009090 clear gflg_invisible.
009100 continue.
009110 else.
009120 clear g_col_counter.
009130 clear gflg_invisible.
009140 endif.
009150 endif.
009160
009170 clear gs_lvc_data.
009180 clear g_style.
009190
009200 assign component
009200 assign component
009210 <ls_fieldcat>-fieldname of structure
rt_data to <g_field>.
009220 if sy-subrc ne 0.
> message x000(0k).
009240 endif.
009250
009260 g_col_counter = g_col_counter + 1.
009270
009280 gs_lvc_data-row_pos = r_row_counter.
009290 gs_lvc_data-col_pos = g_col_counter.
009300 gs_lvc_data-row_id = gs_roid-row_id.
009310 gs_lvc_data-sub_row_id = gs_roid-sub_row_id.
009320
009330 * Endtotal and average
009340 if rs_row-rowtype(1) ca 'T' and
<ls_fieldcat>-do_sum = 'C'.
009350 * save the actual grouplevel information
009360 gs_grouplevels = rs_grouplevels.
009370 clear g_lines.
009380
009390 * get number of lines of the collect table
009400 describe table rt_data lines g_lines.
009410 * if there is only one line or the field has
no references so
009420 * that only the first line has to be
considered

Abap dump

Hi,
We are getting the following error in the PRD system .
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
Short text
     Overflow during the arithmetical operation (type P) in program
What happened?
     Error in the ABAP Application Program
     The current ABAP program "AQFKSD01========SD_STOCKS-01==" had to be termi
      because it has
     come across a statement that unfortunately cannot be executed.
What can you do?
     Note down which actions and inputs caused the error.
     To process the problem further, contact you SAP system
     administrator.
     Using Transaction ST22 for ABAP Dump Analysis, you can look
     at and manage termination messages, and you can also
     keep them for a long time.
Error analysis
     An exception occurred that is explained in detail below.
     The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', wa
      caught and
     therefore caused a runtime error.
The reason for the exception is:
An overflow was discovered in an ongoing arithmetical operation with
operands of type P. Possible causes are:
1. The result field of type P is too small for the result.
2. The result or a intermediate result has more than 31 decimal places.
i have tried searching in notes and etc but still not helpful.
Did anyone solve the problem.
Thanks in advance

This seems to be a query, right (transaction SQ00/SQ01)
The computation fields are too small, the values don´t fit into the types you defined.
Markus

ABAP Dump issue while accessing Gateway

Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>

Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c 1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c 1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam

ABAP DUMP in ST03N : COMPUTE_BCD_OVERFLOW

HI Guys,
     When I go to ST03N, Expert Mode, Select the Daily workload, I double clicked on 15.03.2010, the system will hit the abap dump : COMPUTE_BCD_OVERFLOW. However, when I try for other dates, it is fine. Which meant it is only the 15.03.2010 causing the dump.
    following is the system's details:
     SAP R/3 Kernel :              640_REL
     Kernel Patch :                304
     SAP BASIS : SAPKB62041
    I have raised a OSS message to SAP, and the consultant had replied me with two sapnotes:
     881968
     840763.
    I've implemented the 881968 but there is some error after implement, the ST03N cannot be executed. ( ABAP DUMP syntax error). Hence, I revoked the sapnote 881968. For the 840763, I did not implement since it advised to upgrade the support package for SAP BASIS and I am not sure what is affected after I upgrade the support package.
    The system I mentioned above is not a BW system and I doubt this is why I get the SYNTAX ERROR dump after implement the sapnote.
    Did you guys encountered similar problem? Any solution for this?
    The following is ABAP DUMP: COMPUTE_BCD_OVERFLOW:
Runtime Errors         COMPUTE_BCD_OVERFLOW
Exception              CX_SY_ARITHMETIC_OVERFLOW
       Occurred on     29.03.2010 at 09:37:45
Overflow for arithmetical operation (type P) in program "SAPWL_ST03N"
What happened?
Error in ABAP application program.
The current ABAP program "SAPWL_ST03N" had to be terminated because one of the
statements could not be executed.
This is probably due to an error in the ABAP program.
A value does not fit in a calculation field.
What can you do?
Print out the error message (using the "Print" function)
and make a note of the actions and input that caused the
error.
To resolve the problem, contact your SAP system administrator.
You can use transaction ST22 (ABAP Dump Analysis) to view and administer
termination messages, especially those beyond their normal deletion
date.
Error analysis
An exception occurred. This exception is dealt with in more detail below
. The exception, which is assigned to the class 'CX_SY_ARITHMETIC_OVERFLOW',
was neither
caught nor passed along using a RAISING clause, in the procedure
"CALCULATE_PROFILE" "(METHOD)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
An overflow has been determined in the current arithmetical operation
containing operands of type P. Possible causes include:
1. The results field of type P is to small and the result does not fit
    into it.
    places.
2. The result or partial result has more than 31 decimal places.
Edited by: Wei Jian Kwan on Mar 30, 2010 3:57 AM

Hi Amber,
    The following sapnote is not implementable in my system:
     0001384846 ST03N: BCD_OVERFLOW in SAPWL_LCL_03N_HITLNRESPTI
     This is due to the current Support Pack : SAP BASIS in my system is : SAPKB62041 and the corrections in the sapnote are only available for 700 until 720.
Best Regards,
Ken

Thousands of abap dumps RFC_NO_AUTHORITY

Hello All,
Today suddenly we are getting thousands of abap dumps in Prdocution system and the details are below :
RFC_NO_AUTHORITY
What happened?
    The user "PLIM" attempted to execute a function module from
    the function group "SDIFRUNTIME", but does not have the appropriate
    RFC authorization.
    Error in the ABAP Application Program
    The current ABAP program "SAPLSDIFRUNTIME" had to be terminated because it has
    come across a statement that unfortunately cannot be executed.
Error analysis
    The ABAP program "SAPLSDIFRUNTIME" attempated to execute a statem
    the system automatically checks authorizations and for which the
    user "PLIM" has no authorization.
    The application program did not take the missing authorization
    into consideration and the program must therefore be terminated.
And we checked the RFC conncection and its fine.
Please help me to resolve this ASAP as its an high priority issue.
Chinna.

hi,
Please check the following
http://help.sap.com/saphelp_nw04s/helpdata/en/9b/ac6440549ac249e10000000a1550b0/content.htm
and also provide the user with full RFC authorizations.
Thanks
Suresh Aithagani

ABAP dump in MIGO

Hi all,
There is an abap dump getting when few of the users trying to post MIGO.
This is happening only for few(2) users.
I have analysed the dump, getting dump because:
Runtime errors    : CONVT_OVERFLOW
Exception            : CX_SY_CONVERSION_OVERFLOW
overflow due to converting from 48820.
This error is happend in Zprogram(print program).
But I dint understand,,what would be cause of error.( I tried posting MIGo, it was ok)
Anyone have idea on this?
Regards,
Priya

Hi,,
Thanks for your information.
I have analysed it.
The problem is at,
* get drumweight
SELECT SINGLE umrez
    FROM marm
    INTO lv_umrez
    WHERE matnr = fd_matnr AND
    meinh = 'DR'.
IF sy-subrc EQ 0.
*   drumweight found
    lv_num_label_f = lv_bstmg_kg / ( lv_umrez * lv_ntgew ).
    fd_num_labels = CEIL( lv_num_label_f ).
The dump is happening at
fd_num_labels = CEIL( lv_num_label_f ).
As per my analysis fd_num_labels in the structure is defined as INT2 and in the FORM in changing parameters it is declared as ANY.
Can any one tell me is this because of the difference in data type?

ABAP dump when user login in to PRD system

Hi Experts,
From today morning our users are facing one severe issue.The users when ever they login into the system the ABAP dump is occuring like "Database inconsistency: Start transaction SICK ",when i execute the SICK t-code it is showing errors.
SAP System Check
no application server offers an VB service
Severe problems were detected during initial system check.
Please, do not use that system before fixing these problems.
our go live was before one month only,now we are facing this issue.our kernel release is 740 and DB sybase ASE 15.7.0.1010. please suggest us what can we do.
regards,
Patan Thavaheer.

|15.05.2014                        Active parameters                        12:47:40                                                                                                                                                                                                                         |
|Parameter Name                             |Parameter value                                                                                                                 Parameter Value - Continued                                                                                                     |
|login/disable_multi_gui_login              |1                                                                                                                                                                                                                                                               |
|rdisp/wp_no_enq                            |1                                                                                                                                                                                                                                                               |
|login/no_automatic_user_sapstar            |0                                                                                                                                                                                                                                                               |
|SAPSYSTEMNAME                              |XXX                                                                                                                                                                                                                                                          |
|SAPGLOBALHOST                              |XXXXXX                                                                                                                                                                                                                                                          |
|SAPSYSTEM                                  |00                                                                                                                                                                                                                                                              |
|INSTANCE_NAME                              |DVEBMGS00                                                                                                                                                                                                                                                       |
|DIR_CT_RUN                                 |$(DIR_EXE_ROOT)\$(OS_UNICODE)\NTAMD64                                                                                                                                                                                                                           |
|DIR_EXECUTABLE                             |$(DIR_INSTANCE)\exe                                                                                                                                                                                                                                             |
|DIR_PROFILE                                |\\XXXXXX\sapmnt\XXX\SYS\profile                                                                                                                                                                                                                                 |
|_PF                                        |$(DIR_PROFILE)\XXX_DVEBMGS00_XXXXXX                                                                                                                                                                                                                             |
|SETENV_00                                  |PATH=$(DIR_EXECUTABLE);%PATH%                                                                                                                                                                                                                                   |
|Start_Program_00                           |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)                                                                                                                                                                                                               |
|_CPARG0                                    |list:$(DIR_GLOBAL)/syb/NTAMD64/cpe_sybjdbc.lst                                                                                                                                                                                                                  |
|_CPARG1                                    |source:$(DIR_GLOBAL)/syb/NTAMD64                                                                                                                                                                                                                                |
|Start_Program_01                           |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG0) $(_CPARG1)                                                                                                                                                                                         |
|Start_Program_02                           |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF)                                                                                                                                                                                                               |
|_CPARG2                                    |list:$(DIR_GLOBAL)/syb/NTAMD64/cpe_sybodbc.lst                                                                                                                                                                                                                  |
|_CPARG3                                    |source:$(DIR_GLOBAL)/syb/NTAMD64/sybodbc                                                                                                                                                                                                                        |
|Start_Program_03                           |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG2) $(_CPARG3)                                                                                                                                                                                         |
|_CPARG4                                    |list:$(DIR_CT_RUN)/sapcrypto.lst                                                                                                                                                                                                                                |
|Start_Program_04                           |immediate $(DIR_CT_RUN)\sapcpe$(FT_EXE) pf=$(_PF) $(_CPARG4)                                                                                                                                                                                                    |
|SAPJVM_VERSION                             |6.1.048                                                                                                                                                                                                                                                         |
|DIR_SAPJVM                                 |$(DIR_EXECUTABLE)$(DIR_SEP)sapjvm_6                                                                                                                                                                                                                             |
|jstartup/vm/home                           |$(DIR_SAPJVM)                                                                                                                                                                                                                                                   |
|Start_Program_05                           |immediate $(DIR_CT_RUN)\strdbs.cmd XXX                                                                                                                                                                                                                          |
|sec/libsapsecu                             |$(ssl/ssl_lib)                                                                                                                                                                                                                                                  |
|ssf/ssfapi_lib                             |$(ssl/ssl_lib)                                                                                                                                                                                                                                                  |
|rdisp/wp_no_dia                            |10                                                                                                                                                                                                                                                              |
|rdisp/wp_no_btc                            |3                                                                                                                                                                                                                                                               |
|_DW                                        |$(DIR_EXECUTABLE)\disp+work$(FT_EXE)                                                                                                                                                                                                                            |
|Start_Program_06                           |local $(_DW) pf=$(_PF)                                                                                                                                                                                                                                          |
|_IG                                        |$(DIR_EXECUTABLE)\igswd$(FT_EXE)                                                                                                                                                                                                                                |
|Start_Program_07                           |local $(_IG) -mode=profile pf=$(_PF)                                                                                                                                                                                                                            |
|rdisp/wp_no_vb                             |1                                                                                                                                                                                                                                                               |
|rdisp/wp_no_vb2                            |1                                                                                                                                                                                                                                                               |
|rdisp/wp_no_spo                            |1                                                                                                                                                                                                                                                               |
|ssl/ssl_lib                                |$(DIR_EXECUTABLE)$(DIR_SEP)$(FT_DLL_PREFIX)sapcrypto$(FT_DLL)                                                                                                                                                                                                   |
|SETENV_01                                  |SECUDIR=$(DIR_INSTANCE)/sec                                                                                                                                                                                                                                     |

TIME_OUT ABAP Dumps

Hi Guys,
We are getting ABAP Dumps in our systems very frequently. We are currently using 4.6C (DB2, AIX). We are gettting the dumps in many programs, is this because of some error in application. We currently have kernel patch level 2307.
We have already increased the value of "rdisp/max_wprun_time" from 900 to 2500.
I was suggested by SAP to add a new parameter "rdisp/hold_keeps_time_slice"
which we dont have in our systems. Can anybody pls suggest in this case.
I am attaching the dump:
ABAP runtime errors TIME_OUT
 Occurred on 10/17/2007 at 20:57:15
Time limit exceeded.
What happened?
The program "SAPLBDMON " has exceeded the maximum permitted runtime
and has therefore been terminated.
What can you do?
Note the actions and input that caused the error.
Inform your SAP system administrator.
You can print out this message by choosing "Print". Transaction ST22
allows you to display and manage termination messages, including keeping
them beyond their normal deletion date.
Error analysis
After a certain time, the program terminates to free the work process
for other users who are waiting.
This is to stop work processes being blocked for too long by
- Endless loops (DO, WHILE, ...),
- Database acceses with large result sets,
- Database accesses without an apporpriate index (full table scan)
- database accesses producing an excessively large result set,
The maximum runtime of a program is set by the profile parameter
"rdisp/max_wprun_time".
The current setting is 2500 seconds. After this, the system gives the
program a second chance. During the first half (>= 2500 seconds), a
call that is blocking the work process (such as a long-running SQL
statement) can occur. While the statement is being processed, the
database layer will not allow it to be interrupted. However, to
stop the program terminating immediately after the statement has been
successfully processed, the system gives it another 2500 seconds.
Hence the maximum runtime of a program is at least twice the value of
the system profile parameter "rdisp/max_wprun_time".
How to correct the error
Long-running programs should be started as background jobs. If
this is not possible, you can increase the value of the system
profile parameter "rdisp/max_wprun_time".
One or more of the following may also be useful:
following measures:
- Endless loops: Correct in program;
- Database access with large result set:
Use "SELECT * INTO itab" instead of "SELECT ... ENDSELECT";
- Database access without suitable index: Check the index generation.
If the error occurred in a non-modified SAP program, you may be
able to find a solution in the SAP note system.
If you have access to the note system yourself, use the following
search criteria:
"TIME_OUT"
"SAPLBDMON " or "LBDMONU15 "
"ALE_CCMS_EVALUATE_GRP"
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
If you cannot solve the problem yourself, please send the
following documents to SAP:
1. A hard copy print describing the problem.
 To obtain this, select the "Print" function on the current screen.
2. A suitable hardcopy prinout of the system log.
 To obtain this, call the system log with Transaction SM21
 and select the "Print" function to print out the relevant
 part.
3. If the programs are your own programs or modified SAP programs,
 supply the source code.
 To do this, you can either use the "PRINT" command in the editor or
 print the programs using the report RSINCL00.
4. Details regarding the conditions under which the error occurred
 or which actions and input led to the error.
Thank you.
Irshad Mohammed

hi
use function module progress_indicator. it resets the run time value.
use this where ever extraction of data is more were program needs much time, just call this function module it works.
check this code,
This program uploads material number from excel sheet and does
******modifications to material number if required by the user
******and updates the table zmatnr with new material against the old material number
REPORT zmat_no message-id zebg.
TYPE-POOLS truxs.
TABLES:zmatnr.
DATA : itab LIKE alsmex_tabline OCCURS 0 WITH HEADER LINE.
DATA row LIKE alsmex_tabline-row.
data : g_matnr like mara-matnr.
data : count type i.
data : itab_count type i.
data : gi_final like zmatnr occurs 0 with header line.
*data : begin of gi_final occurs 0,
 mat_old like mara-matnr,
 mat_new like mara-matnr,
 end of gi_final.
***********************Selection Screen*************************
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
PARAMETER : pfname LIKE rlgrap-filename OBLIGATORY.
select-options : records for count.
SELECTION-SCREEN END OF BLOCK b1.
*********************At Selection Screen*************************
AT SELECTION-SCREEN ON VALUE-REQUEST FOR pfname.
PERFORM search.
START-OF-SELECTION.
perform process.
form process.
CALL FUNCTION 'ALSM_EXCEL_TO_INTERNAL_TABLE'
 EXPORTING
 filename = pfname
 i_begin_col = 1
 i_begin_row = 2
 i_end_col = 12
 i_end_row = 65000
 TABLES
 intern = itab
 EXCEPTIONS
 inconsistent_parameters = 1
 upload_ole = 2
 OTHERS = 3.
IF sy-subrc <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
describe table itab lines itab_count.
 row = 1.
loop at itab.
 if itab-row <> row.
 append gi_final.
 clear gi_final.
 endif.
 case itab-col.
 when '1'.
 CLEAR G_MATNR.
 gi_final-OLD_MATNR = itab-value.
 CONCATENATE 'NEW' gi_final-old_matnr INTO itab-value.
 gi_final-new_MATNR = itab-value.
 endcase.
 row = itab-row.
endloop.
append gi_final.
clear gi_final.
CALL FUNCTION 'PROGRESS_INDICATOR'
EXPORTING
 I_TEXT = 'File Has Been Successfully Uploaded from Workstation ' .
if not gi_final[] is initial.
 if not records-low is initial .
 if not records-high is initial.
 records-high = records-high + 1.
 DESCRIBE TABLE gi_final LINES count.
 IF records-high < count.
 DELETE gi_final FROM records-high TO count.
 ENDIF.
 IF records-low <> 1.
 IF records-low <> 0.
 DELETE gi_final FROM 1 TO records-low.
 ENDIF.
 ENDIF.
 endif.
 endif.
endif.
IF NOT GI_FINAL[] IS INITIAL.
 CALL FUNCTION 'PROGRESS_INDICATOR'
 EXPORTING
 I_TEXT = 'Processing zmatnr table'
 I_OUTPUT_IMMEDIATELY = 'X'.
 if itab_count <> count.
 message i000 with 'records are not matching'.
 exit.
 else.
 modify zmatnr from table gi_final.
 message i000 with 'data base table modified successfully'.
 endif.
endif.
endform.
*& Form search
 text
--> p1 text
<-- p2 text
FORM search .
CALL FUNCTION 'KD_GET_FILENAME_ON_F4'
 EXPORTING
 static = 'X'
 CHANGING
 file_name = pfname.
ENDFORM. " search
regards
siva

Regarding ABAP Dump found when saving the job.

Hi all,
Generally we create a job and once the job is created,we rasie Sales Order,Purchase Order and so on.
When we create a job we give the details of the Sold -to-party,client,parent and child job text,advertising category,project type, sales organisation,Cost and profit center,person incharge and purchase division.
After submitting these details the job gets created and the job number will be generated.
But now we have created a new Sales Organisation, which is leading to ABAP Dump.
The functional people have concluded that there is nothing wrong in the configaration settings.
If we enter an existing sales organisation in the job creation process the job is getting created and the job number is displayed.
But if we try to enter a new sales organisation the ABAP Dump is comming.
After debugging we came to know that BAPI function Module called
Bapi Project Maintain Call and inside that there is another bapi call called
BAPI_PROJECT_MAINTAIN which is taking some structures as inputs among them
this new sales org is there.

Hi all,
Is there any answer regarding this question.
Thanx in advance

ABAP dump DBIF_DSQL2_SQL_ERROR in report /SAPAPO/OM_LC_UPGRADE_70 during up

We are in the process of Upgrade of SCM APO system from version 5.0 to 7.0.
Also we are upgrading livecache to version 7.7.
While running report /SAPAPO/OM_LC_UPGRADE_70 in se38 to perform the steps under section 3, we are getting following ABAP dump:
DBIF_DSQL2_SQL_ERROR
Please find ataached the entire abap dump for your reference. We have successfully executed sections A & B of report /SAPAPO/OM_LC_UPGRADE_70 at the appropriate time during the upgrade.
Kindly look into the issue and revert ASAP.
Thanks & Regards,
Virendra
+919619498381

Hello Virendra , Hello Pavan,
the SAP MaxDB/liveCache is forum and NOT hotline of the support, it's NOT ASAP support.
We shared the knowledge or expierence on the posted in the forum questions/issues when we have time voluntarily.
1.
As you are SAP customer =>
I recommend to create the SAP message with the high priority and esculate it if it's ASAP case.
Then your phone number will be used by SAP support to call you and help with issue.
2.
Please find ataached the entire abap dump for your reference. We have successfully executed sections A & B of report /SAPAPO/OM_LC_UPGRADE_70 at the appropriate time during the upgrade."
This part is looking that the SAP message was already created, the ABAP dump was already attached to the message and
now the SAP message's issue copied to this forum with hope to get the solution.
Am I correct?
Then first check what database error you got in ABAP dump & post this info.
Regards, Natalia Khlopina

ABAP dump while executing transaction *PC00_M99_CIPE*

Hi,
Getting ABAP dump while executing transaction PC00_M99_CIPE ,hence cannot do payroll posting .
    Information on where terminated
    Termination occurred in the ABAP program "CL_HRFPM_CD_CLOSING_HANDLER===CP" -
     in "GET_FM_POS_CHECK_DATA".
    The main program was "RPCIPE00 ".
    In the source code you have the termination point in line 13
    of the (Include) program "CL_HRFPM_CD_CLOSING_HANDLER===CM00E".
We have recently upgraded our patch level.
SAP_OCS(SPAM/SAINT)          SAPKD70026            SAPKD70033
SAP_ABA                                SAPKA70012            SAPKA70018
SAP_BASIS                              SAPKB70012           SAPKB70018
PI_BASIS                                 SAPKIPYJ7B            SAPKIPYJ7I
SAP_BW                                  SAPKW70012           SAPKW70020
SAP_AP                                   SAPKNA7008           SAPKNA7015
SAP_APPL                                SAPKH60009           SAPKH60015
SAP_HR                                  SAPKE60028            SAPKE60039
EA-HR                                     SAPKGPHD07          SAPKGPHD26
Kindly guide me.
Regards,
Rachel

thanks for the quick response.
By applying note 1137655,problem got resoved.
FORM CHECK_CMTNT_UPDATE_CLOSED
Delta001
Context Block
FORM check_cmtnt_update_closed
           USING
              u_key_date TYPE begda
           CHANGING
              c_flg_cmtnt_closed.
Delete Block
DATA ls_encumb_iv TYPE t77hrfpm_encumb.
DATA l_gsval TYPE t77s0-gsval.
DATA ls_fm_pos_key TYPE hrfpm_fm_doc_pos-key_pos.
DATA lx TYPE REF TO cx_hrfpm.
STATICS so_closing_handler TYPE REF TO cl_hrfpm_cd_closing_handler.
CLEAR c_flg_cmtnt_closed .
*--- old switch from note??? active?
*--- if so: use the old logic
cl_hr_t77s0=>read_gsval(
    EXPORTING
      grpid       = 'HRFPM'
      semid       = 'CHKAC'
    IMPORTING
      returnvalue = l_gsval ).
TRY.
      IF NOT l_gsval IS INITIAL .
        TRY.
            c_flg_cmtnt_closed = 'X'.
Insert Block
DATA: ls_encumb_iv TYPE t77hrfpm_encumb.
STATICS:
      s_gsval TYPE t77s0-gsval,
      s_gsval_read TYPE flag.
IF s_gsval_read IS INITIAL .
    SELECT SINGLE gsval
       FROM t77s0
      INTO s_gsval
      WHERE grpid = 'HRFPM'
        AND semid = 'CHKAC' .
    s_gsval_read = 'X'.
ENDIF.
CLEAR c_flg_cmtnt_closed .
TRY.
      c_flg_cmtnt_closed = 'X'.
Delta002
Context Block
    CATCH
        cx_hrfpm_db_operation
        cx_hrfpm_ad_customizing .
Delete Block
        ENDTRY.
      ELSE.
*--- using closed period functionality of PBC
        IF so_closing_handler IS INITIAL .
          CREATE OBJECT so_closing_handler.
        ENDIF.
        IF so_closing_handler->consumption_in_closed_period(
                   i_key_date = u_key_date
                   is_fm_pos_key = ls_fm_pos_key )
             IS INITIAL.
          c_flg_cmtnt_closed = 'X'.
        ENDIF.
      ENDIF.
    CATCH cx_hrfpm INTO lx.
    lx->raise_sy_message( ).
ENDTRY.
ENDFORM.                    "check_cmtnt_update_closed
Insert Block
ENDTRY.
ENDFORM.                    "check_cmtnt_update_closed

ABAP dump on entering into IC

Similar Messages

Maybe you are looking for