Transaction control with DI Server and B1WS

Hi everyone,
recentily I started working with DI server and B1WS, and talking with friends and with a brief research in the foruns Its seens to be impossible to have a Rollback in database transactions performed with DI server and B1WS.
Its really true? I mean, I receive the Session ID when I use the login service, it shouldn't be so difficult to have a rollback function with this info...

Really? Anyone knows?

Similar Messages

Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points

Hi Guys,
I would like to go for "Dynamic VLAN Assignment with RADIUS Server and Aironet Access Points 1300". I want the AP to broadcast only 1 SSID. The client find the SSID ->put in his user credential->Raudius athentication->assign him to an specific vlan based on his groupship.
The problem here is that I don't have a AP controller but only configurable Aironet Access Points 1300. I can connect to the radius server, but I am not sure how to confirgure the AP's port, radio port, vlan and SSID.
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
I go through some references:
3.5 RADIUS-Based VLAN Access Control
As discussed earlier, each SSID is mapped to a default VLAN-ID on the wired side. The IT administrator may wish to impose back end (such as RADIUS)-based VLAN access control using 802.1X or MAC address authentication mechanisms. For example, if the WLAN is set up such that all VLANs use 802.1X and similar encryption mechanisms for WLAN user access, then a user can "hop" from one VLAN to another by simply changing the SSID and successfully authenticating to the access point (using 802.1X). This may not be preferred if the WLAN user is confined to a particular VLAN.
There are two different ways to implement RADIUS-based VLAN access control features:
1. RADIUS-based SSID access control: Upon successful 802.1X or MAC address authentication, the RADIUS server passes back the allowed SSID list for the WLAN user to the access point or bridge. If the user used an SSID on the allowed SSID list, then the user is allowed to associate to the WLAN. Otherwise, the user is disassociated from the access point or bridge.
2. RADIUS-based VLAN assignment: Upon successful 802.1X or MAC address authentication, the RADIUS server assigns the user to a predetermined VLAN-ID on the wired side. The SSID used for WLAN access doesn't matter because the user is always assigned to this predetermined VLAN-ID.
extract from: Wireless Virtual LAN Deployment Guide
http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00801444a1.html
==============================================================
Dynamic VLAN Assignment with RADIUS Server and Wireless LAN Controller Configuration Example
http://www.cisco.com/en/US/tech/tk722/tk809/technologies_configuration_example09186a008076317c.shtml#switch
==============================================================
Controller: Wireless Domain Services Configuration
http://www.cisco.com/en/US/products/hw/wireless/ps4570/products_configuration_example09186a00801c951f.shtml
Any help on this issue is appreicated.
Thanks.

I'm not sure if the Autonomous APs have the option for AAA Override. On the WLC, I can go into the BSSID, Security, Advanced, and there's a checkbox that I would check to allow a Radius server to send back the VLAN.
I did a little research and it looks like the 1300 may give this option but instead is defined as "VLAN Override". I've found the release notes for 12.3(7)JA5 (not sure what version you're running) that give mention and a link to configuring EAP on page 4: http://www.ciscosystems.ch/en/US/docs/wireless/access_point/1300/release/notes/o37ja5rn.pdf
Hope this helps

Problems with games server and client

Hi! I am making an MMORPG game and I have problems with the server and client connection.
I can connect to the server, but when a second player does, the server console tells me this:
java.net.SocketException: Connection reset
After that, all clients disconnect.
Which is the problem?
How can I solve it?
Thank you so much

Here is how my sever work. I took some of this code from a book called Killer Programming Games in Java. If you google for it, you will find it for sure.
TourGroup tg = new TourGroup(); // this object stores information about all clients connected to the server
    try {
      ServerSocket serverSock = new ServerSocket(PORT);
      Socket clientSock;
      while (true) {
        System.out.println("Waiting for a client...");
        clientSock = serverSock.accept();
        new TourServerHandler(clientSock, tg).start(); // this is the thread that monitors each client
    catch(Exception e)
    { System.out.println(e); }
} This is some code of TourServerHandler
public TourServerHandler(Socket s, TourGroup tg)
    this.tg = tg;
    clientSock = s;
    name= "?";
    cliAddr = clientSock.getInetAddress().getHostAddress();
    port = clientSock.getPort();
    System.out.println("Client connection from (" +
                 cliAddr + ", " + port + ")");
public void run()
// process messages from the client
    try {
      // Get I/O streams from the socket
      BufferedReader in = new BufferedReader(
   new InputStreamReader( clientSock.getInputStream() ) );
      PrintWriter out =
new PrintWriter( clientSock.getOutputStream(), true );
// and here goes the rest... The TourServerHandler thread uses this code to send messages:
tg.broadcast(msg); tg.broadcast works like this:
synchronized public void broadcast(String cliAddr, int port, String msg)
// broadcast to everyone but original msg sender
    TouristInfo c; // this object stores info about the client
    for(int i=0; i < tourPeople.size(); i++) {
      c = (TouristInfo) tourPeople.get(i);
        c.sendMessage(msg);
} This is the error part
public void sendMessage(String msg)
PrintWriter out;
    out.println(msg);
      System.out.println("OK");
} I can't find any error but I still get that Connection reset exception...

What is going on with yahoo mail? Cannot connect with their server and I can't get my emails!

What is going on with yahoo server? I can't connect to their email server to get my emails!!!!

This is Firefox support, not Yahoo Mail. We can help with problems with
the browser. Yahoo Mail is out of our control.
Many site issues can be caused by corrupt cookies or cache.
* Clear the Cache and
* Remove Cookies '''''Warning ! ! '' This will log you out of sites you're logged in to.'''
Type '''about:preferences'''<Enter> in the address bar.
* '''Cookies;''' Select '''Privacy.''' Under '''History,''' select Firefox will '''Use Custom Settings.''' Press the button on the right side called '''Show Cookies.''' Use the search bar to look for the site. Note; There may be more than one entry. Remove '''All''' of them.
* '''Cache;''' Select '''Advanced > Network.''' Across from '''Cached Web Content,''' Press '''Clear Now.'''
If there is still a problem,
'''[https://support.mozilla.org/en-US/kb/troubleshoot-firefox-issues-using-safe-mode Start Firefox in Safe Mode]''' {web link}
While you are in safe mode;
Type '''about:preferences'''<Enter> in the address bar
Select '''Advanced > General.'''
Look for and turn off '''Use Hardware Acceleration'''.
Poke around safe web sites. Are there any problems?
Then restart.

SAP Business Objects Access control with BI4.1 and enterprise authetication

Hi Team,
We are on BI 4.1 with enterprise authentication. We are using IDM (oracle waveset 8) for access management. Currently we receive request from IDM and we manually configure user in BI4.1. We are now planning to automate this process, like as soon as user request place request through IDM , his access wil lget configure in BI 4.1
can we achieve this using SAP Business Objects Access controle or with any other method ? Need your guidance
Thanks,
Nivedita

Hi Andrea,
1. you configure the BOE Server with the SAP authentication for your SAP server
1b you configure trust between the portal server and the SAP system
2. you import the portal iView template as part of the SAP Kit into the portal server
3. you create a new system (or use an existing one) in the portal system landscape and configure the properties of the Crystal Enterprise properties
4. you create a new iView based on the portal iView template
ingo
I have some difficulties to create a new system, I don't know witch option i should choose.
     System (from template)
     +BI JDBC System
     BI ODBO-Compliant OLAP System
     BI SAP Query System
     BI XMLA-Compliant OLAP System
     EP 5.0 System
     HTTP System
     JDBC System
     KM Lotus System
     KM WebDAV System
     KM Windows System
     SAP system using connection string
     SAP system using dedicated application server
     SAP system with load balancing
     Web Service System using WSDL URL+
     System (from PAR)
     com.sap.km.cm.repository.manager
     com.sap.km.common.domino
     com.sap.netweaver.coll.appl.gw
     com.sap.netweaver.coll.appl.sync
     com.sap.portal.httpconnectivity.urlsystem
     com.sap.portal.ivs.sl.connector.helper
     com.sap.portal.runtime.application.soap
     com.sap.portal.systems.bi
     com.sap.portal.systems.datasource
     com.sap.portal.systems.EP5
     com.sap.portal.systems.jdbc
     com.sap.portal.systems.sap
     com.sap.portal.systems.webservices
     com.sap.portal.unification50.template
Thanks a lot
Selvam

Can I sync my iPhone calendar with exchange server AND ical on my mac ?

I have been happily using my iPhone synced with my Macbook over usb via iTunes.
I have contacts and iCal syncing. I have a number of 'calendars' set up in iCal which allow me to view separate aspects of home and work but they all exist within iCal. iPhone just treats these as colour coded appointments (different colour for each ical calendar)
I really like this set up.
However, I just changed jobs to a firm where they have a hosted outlook exchange set up and I need to use the exchange calendar for work appointments and showing my availability.
I have managed to setup my iPhone to work with the Exchange server for email as well as in apple Mail on my mac. This has all worked fine. However, I hesitated when iPhone asked if i wanted to sync my contacts and calendar. I said no as I was unsure if my private calendar/contacts would be uploaded to the public work area.
In fact it seems that this is the least of my worries:
As I have read on apple support for iPhone:
"Note that after configuring an Exchange ActiveSync account, all existing contact and calendar information on the iPhone or iPod touch is overwritten. Additionally, iTunes no longer syncs contacts and calendars with your desktop computer. You can still sync your iPhone or iPod touch wirelessly with MobileMe services."
So I am really pleased that I didn't let it sync those and wipe out my personal data if that is really true.
But now I am unsure how best to enable myself to view and update the work calendar on exchange.
Also it would be nice to see work contacts on my iPhone.
Contacts
- although i have said no to sync contacts with Exchange in fact it looks like I can get contacts ok - when i send email from the Exchange account on the phone , it searches Exchange contacts on the server as i type in the TO box.
- also in Contacts on the iPhone I have a new group that has been created with the name of my Exchange account. The group appears to be blank when you go into it on the phone, but you can type in the search box and get contact details from the server just fine.
This seems workable for now for my purposes, although updating contacts is not going to be possible that way.
I'd like more info on that if poss but more importantly..
Calendar
- Unlike Contacts, no Calendar has been auto created for Exchange
- Unlike contacts, I can't see how I can view or search or create an appointment in my Exchange calendar on the iPhone
What is the best solution to this problem - I presume lots of people face the same dilemma. My initial research suggests that there are multiple ways round this but all of them look like workarounds with various disavantages.
Questions are
- Can't I just set up Exchange as one of my calendars in ical?
- Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
- What is the best work around for this?
At the moment I am seriously considering getting a separate iPhone for work and have that sync with Exchange fully although that seems a bit drastic and does not solve the problem of seeing work and home appointments on the same calendar.

Can't I just set up Exchange as one of my calendars in ical?
Only if you're running Snow Leopard and your employer will allow access (different than iPhone/mobile device access, so most likely not), but not needed - keep reading.
Is it really true that I have to choose between syncing Exchange with work server OR syncing iCal with personal Macbook?
No. It was true, but with the v3.0 software that changed - you can now sync your Exchange contacts and calendar over the air, and your Address Book and iCal via iTunes over the docking cable.
What is the best work around for this?
None needed. When you set up the exchange account, and choose to turn on syncing of contacts and calendars, you will be prompted to remove all other data, or keep it on the iPhone. Choose the keep option. Note that in that case, your personal data will not be uploaded to the Exchange server - the iPhone keeps them separate (although you can choose to view them in a merged fashion).
I have this set up on my phone (Exchange calendar along side personal and other calendars from iCal). Same for contacts. Works great.

Accessing time capsule with osx server and vpn

i have apple server and a time capsule that i use as harddisk. Now I want to access the time capsule by VPN. I cannot make an accesspoint of my time capsule.
When I turn off file sharing on the time capsule and turn it on on the server then i cannot access my files locally.

Sorry, have to disagree.
I have a time capusle and its in the hfs+ and my vista pc reads it fine.
You do need to download the airport software for windows from apple downloads. Install that and then, windows can see it fine under networking. Then to map a drive letter, just navigate to your time capsule in windows then right click on the share and give it a drive letter.
Or you can use the cd that came with your time capsule in your windows pc and it will install the client from there.

Need help with OSx server and profile manager

I messed up my OS X server and seems like it has stopped working.
I cannot access my server remotely or locally and it shows Safari cannot connect to server.
I made mistake resetting keychain to default and all certificates were missing.I restored system.keychain from time machine but not it won't run.
System log shows
ec 30 18:31:25 mdmserver.medicalpharmacies.com certadmin[14697]: BundleManager(non-plugin calling servermgr_certs): doCommand finished reply = {
     error = <62706c69 73743030 d4010203 04050625 26582476 65727369 6f6e5824 6f626a65 63747359 24617263 68697665 72542474 6f701200 0186a0a8 07081112 1a1b1c22 55246e75 6c6cd409 0a0b0c0d 0e0f1056 4e53436f 64655a4e 53557365 72496e66 6f584e53 446f6d61 696e5624 636c6173 7311138a 80038002 80075f10 19636f6d 2e617070 6c652e73 65727665 726d6772 5f636572 7473d313 140c1517 19574e53 2e6b6579 735a4e53 2e6f626a 65637473 a1168004 a1188005 80065f10 164e534c 6f63616c 697a6564 44657363 72697074 696f6e5f 1032556e 61626c65 20746f20 66696e64 20706173 73706872 61736520 666f7220 6578706f 72746564 20707269 76617465 206b6579 d21d1e1f 205a2463 6c617373 6e616d65 5824636c 61737365 735c4e53 44696374 696f6e61 7279a21f 21584e53 4f626a65 6374d21d 1e232457 4e534572 726f72a2 23215f10 0f4e534b 65796564 41726368 69766572 d1272854 726f6f74 80010008 0011001a 0023002d 00320037 00400046 004f0056 0061006a 00710074 00760078 007a0096 009d00a5 00b000b2 00b400b6 00b800ba 00d30108 010d0118 0121012e 0131013a 013f0147 014a015c 015f0164 00000000 00000201 00000000 00000029 00000000 00000000 00000000 00000166>;
     errorCode = 5002;
     errorDescription = "Unable to find passphrase for exported private key";
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd[14695]): Service exited with abnormal code: 1
Dec 30 18:31:25 mdmserver com.apple.xpc.launchd[1] (org.apache.httpd): Service only ran for 0 seconds. Pushing respawn out by 10 seconds.

Hi!
Do you have a time machine backup? What you can try to do is a full restore on a testmachine or a VM and export the old keychain and import it into your broken server:
Passwords:
http://www.icreatemagazine.com/tips/os-x-tutorial-how-to-transfer-keychain-data- between-macs/
Certs:
https://www.racf.bnl.gov/docs/howto/grid/osxcertmgmt
Good luck!

Website issue with osx server and hosting

so i had a website hosted from my osx server and i had bought the domain name from godaddy it worked great but i desided to instead of hosting it on my osx server to just host it on godaddy so i turned to server off and added the domain to my godaddy account hosting and now it works but one problem all computers can veiw the website but mine. i think it has somthing to do with the fact that my mac was the one hosting it. but if i go to my browser and go to my wesite i get a error but than i go to any other computer and it works great help please

A couple ideas
check our /etc/hosts file, you might have an entry for your domain.
sudo pico /etc/hosts
     do you see any entries for your domain? If so:
     edit the file by navigating with the arrow keys, delete the line
     with your domain. Hit ctrl-x when done (enter 'y' to save the change)
Clear your DNS cache
     dscacheutil -flushcache
Try a different DNS server, go into your network settings (In System Preferences)
Go to Ethernet or Wifi (whichever you are using), click Advanced and under the DNS tab enter:
     8.8.8.8
Make sure no entries are ABOVE it.
If none of this works, send the results of these commands:
     cat /etc/hosts
     cat /etc/resolv.conf
     dig +short mydomain.com   (replace with your domain)
The results of these should point us in the right direction.
Jeff

Problems with mail server and clients

I have set up OS X server on my iMac with 2 MacBook Pros as clients. I have set up the server to be a mail server.
I have two problems.
1. I can successfully send and receive emails between the server and one MacBook Pro but neither send or receive mail on the other even though the settings are identical. I get the standard dialog box 'cannot connect using Port 25'.
2. On the MacBook Pro that will send mail I can also send mail out of the LAN but mail sent to me is bounced back to the sender.
Any help would be greatly appreciated. I am new to OS server my learning curve over the past week has been vertical!!!

You are not alone. I have started a current thread because of the same problem, http://discussions.apple.com/thread.jspa?threadID=1278072&tstart=0.
Another thread ended with the poster claiming to have things working after a clean install, but I have had no such luck with any of my installations so far.
Do you have only one domain on your server, or are you hosting virtual domains also?
/Lars

I am trying to set up my outlook 2007 account on i pad and the process sticks on verifying. It would appear to be a problem with outgoing server and I have changed the port number but with no success.

I have just purchased an i pad 2 and am having trouble with the e-mail set up. Set up with wi-fi, i-cloud etc has worked fine but the i pad is recognising my outlook 2007 account details but is not verifying it. The trouble appears to be with the outgoing server and I have tried changing the port number, but to no avail! Also reset the account settings for holding messages on the server...help! As you can tell I'm not very techy and I'm desperate to get the bloody thing working as I'm going away on Tuesday! Any suggestions?

I had a similar issue and it was password case sensitive issue

Creating a simpel network with Lion Server, and add Windows XP computers to it

We have a Mac Lion Server and 3 computers with Windows XP. Previously we had a Windows 2003 server with a domain name: "MYDOMAIN". When logging into Windows it logs into this domain.
I would like to replace this Windows 2003 server with my new Mac Lion server so, I build up a test setup. I connected the Mac Lion server (iMac) with my Windows XP pc with an ethernet cable. Then, I setup a DHCP, DNS and Open directory in the Server Admin. Added users. I configured the IP adres of the server to a static one by setting the IPv4 to "using DHCP with manual address".
Then I wanted to let my Windows XP server join the domain of the Lion Server, however I cannot let my Windows XP client connect to the domain of the Lion Server.
I read in the advanced administration that you can set up Windows XP for domain login. Where do I find the name of this domain? It should be stated in the server admin, open directory, settings, general tab, but the only thing I find here is: Role: Open Directory Master.
In Windows XP, when I explore in explorer the Microsoft-Windows Network I can see in "MYDOMAIN" the MacLion Server and my Windows XP pc. So sharing files is no problem.
However, I really want to create a new domain with my Lion Server and let the Windows XP pc's login to the new domain.
I hope anyone can help me.

Thanks for the info.
I read some stuff about this indeed, so I was thinking, because we have a small network, could it be possible to share files on the server via a workgroup?
If we add the 3 Windows XP pc's to the same workgroup as the Lion Server, would there be a problem?
Then at startup of Windows XP, should we login to the pc instead of the domain? And where would I find the Lion server in Windows XP?

Streaming Webcam with media server and cs3

Can someone explain how to stream a webcam with media server?
Ive got media server and flash cs3 (actionscript 2.0 in this
case) installed, and I want to create a live webcam stream, but Im
not really sure how to do it. I know it involves NetStream, and
camera somewhere along the line but thats about it. If someone coul
give me an iea of how to o it that owul be much appreciated.
Thanks

Clockwork_Killa,
I don't use it with webcams, but there are some nice examples
in William Sanders book, Actionscript 3.0 Design Patterns. It's the
only book I've found that has any real world examples of working
with media in Flash with fms2.
Hope it helps. Good luck. You're going to need it ;)

Error with Sql Server and Java App

Hi i have a java based multithread application which comunicate with SQL SERVER via DSN bridge , some time my application crashes with this error any idea what its happend and how to remove it .
Thanks
************* Exception ********************************8
An unexpected exception has been detected in native code outside the VM.
Unexpected Signal : EXCEPTION_ACCESS_VIOLATION occurred at PC=0x77F87EEB
Function=RtlEnterCriticalSection+0xB
Library=F:\WINNT\system32\ntdll.dll
Current Java thread:
at sun.jdbc.odbc.JdbcOdbc.numResultCols(Native Method)
at sun.jdbc.odbc.JdbcOdbc.SQLNumResultCols(JdbcOdbc.java:4625)
at sun.jdbc.odbc.JdbcOdbcStatement.getColumnCount(JdbcOdbcStatement.java:1235)
at sun.jdbc.odbc.JdbcOdbcStatement.execute(JdbcOdbcStatement.java:352)
- locked <04DC3EE0> (a sun.jdbc.odbc.JdbcOdbcStatement)
at sun.jdbc.odbc.JdbcOdbcStatement.executeUpdate(JdbcOdbcStatement.java:288)
at advcomm.advrad.DBParams.Ltht(Unknown Source)
at advcomm.advrad.DBParams.BDhb(Unknown Source)
at advcomm.advrad.DlkhlHz.run(Unknown Source)
Dynamic libraries:
0x00400000 - 0x00406000 F:\j2sdk1.4.1_03\bin\java.exe
0x77F80000 - 0x77FFC000 F:\WINNT\system32\ntdll.dll
0x7C2D0000 - 0x7C335000 F:\WINNT\system32\ADVAPI32.dll
0x7C570000 - 0x7C623000 F:\WINNT\system32\KERNEL32.dll
0x77D30000 - 0x77DA8000 F:\WINNT\system32\RPCRT4.dll
0x78000000 - 0x78045000 F:\WINNT\system32\MSVCRT.dll
0x75030000 - 0x75044000 F:\WINNT\system32\WS2_32.DLL
0x75020000 - 0x75028000 F:\WINNT\system32\WS2HELP.DLL
0x6D340000 - 0x6D46B000 F:\j2sdk1.4.1_03\jre\bin\client\jvm.dll
0x77E10000 - 0x77E79000 F:\WINNT\system32\USER32.dll
0x77F40000 - 0x77F7C000 F:\WINNT\system32\GDI32.dll
0x77570000 - 0x775A0000 F:\WINNT\system32\WINMM.dll
0x6D1E0000 - 0x6D1E7000 F:\j2sdk1.4.1_03\jre\bin\hpi.dll
0x6D310000 - 0x6D31E000 F:\j2sdk1.4.1_03\jre\bin\verify.dll
0x6D220000 - 0x6D239000 F:\j2sdk1.4.1_03\jre\bin\java.dll
0x6D330000 - 0x6D33D000 F:\j2sdk1.4.1_03\jre\bin\zip.dll
0x6D260000 - 0x6D26B000 F:\j2sdk1.4.1_03\jre\bin\JdbcOdbc.dll
0x1F7A0000 - 0x1F7DA000 F:\WINNT\system32\ODBC32.dll
0x71710000 - 0x71794000 F:\WINNT\system32\COMCTL32.dll
0x7CF30000 - 0x7D175000 F:\WINNT\system32\SHELL32.dll
0x70A70000 - 0x70AD6000 F:\WINNT\system32\SHLWAPI.dll
0x76B30000 - 0x76B6E000 F:\WINNT\system32\comdlg32.dll
0x1F840000 - 0x1F857000 F:\WINNT\system32\odbcint.dll
0x1F9C0000 - 0x1FA27000 F:\WINNT\System32\SQLSRV32.dll
0x41090000 - 0x410BD000 F:\WINNT\System32\SQLUNIRL.dll
0x77800000 - 0x7781E000 F:\WINNT\System32\WINSPOOL.DRV
0x76620000 - 0x76631000 F:\WINNT\system32\MPR.DLL
0x77820000 - 0x77827000 F:\WINNT\system32\VERSION.dll
0x759B0000 - 0x759B6000 F:\WINNT\system32\LZ32.DLL
0x779B0000 - 0x77A4B000 F:\WINNT\system32\OLEAUT32.dll
0x7CE20000 - 0x7CF0F000 F:\WINNT\system32\ole32.dll
0x7CDC0000 - 0x7CE13000 F:\WINNT\System32\NETAPI32.dll
0x77980000 - 0x779A4000 F:\WINNT\System32\DNSAPI.dll
0x75050000 - 0x75058000 F:\WINNT\System32\WSOCK32.dll
0x751C0000 - 0x751C6000 F:\WINNT\System32\NETRAP.dll
0x77BF0000 - 0x77C01000 F:\WINNT\System32\NTDSAPI.dll
0x77950000 - 0x7797B000 F:\WINNT\system32\WLDAP32.DLL
0x7C340000 - 0x7C34F000 F:\WINNT\System32\SECUR32.DLL
0x75150000 - 0x75160000 F:\WINNT\System32\SAMLIB.dll
0x769A0000 - 0x769A7000 F:\WINNT\system32\NDDEAPI.DLL
0x1FA30000 - 0x1FA46000 F:\WINNT\System32\sqlsrv32.rll
0x1F7F0000 - 0x1F80A000 F:\WINNT\system32\odbccp32.dll
0x74CB0000 - 0x74CCA000 F:\WINNT\system32\DBNETLIB.DLL
0x75500000 - 0x75504000 F:\WINNT\system32\security.dll
0x782D0000 - 0x782F2000 F:\WINNT\system32\msv1_0.dll
0x7C740000 - 0x7C7CC000 F:\WINNT\system32\CRYPT32.dll
0x77430000 - 0x77441000 F:\WINNT\system32\MSASN1.dll
0x77340000 - 0x77353000 F:\WINNT\system32\iphlpapi.dll
0x77520000 - 0x77525000 F:\WINNT\system32\ICMP.DLL
0x77320000 - 0x77337000 F:\WINNT\system32\MPRAPI.DLL
0x773B0000 - 0x773DF000 F:\WINNT\system32\ACTIVEDS.DLL
0x77380000 - 0x773A3000 F:\WINNT\system32\ADSLDPC.DLL
0x77830000 - 0x7783E000 F:\WINNT\system32\RTUTILS.DLL
0x77880000 - 0x7790E000 F:\WINNT\system32\SETUPAPI.DLL
0x7C0F0000 - 0x7C154000 F:\WINNT\system32\USERENV.DLL
0x774E0000 - 0x77514000 F:\WINNT\system32\RASAPI32.DLL
0x774C0000 - 0x774D1000 F:\WINNT\system32\rasman.dll
0x77530000 - 0x77552000 F:\WINNT\system32\TAPI32.dll
0x77360000 - 0x77379000 F:\WINNT\system32\DHCPCSVC.DLL
0x74CD0000 - 0x74CD8000 F:\WINNT\system32\DBmsLPCn.dll
0x0B990000 - 0x0B9E6000 F:\WINNT\system32\MSVCR71.dll
0x6D2E0000 - 0x6D2EE000 F:\j2sdk1.4.1_03\jre\bin\net.dll
0x782C0000 - 0x782CC000 F:\WINNT\System32\rnr20.dll
0x777E0000 - 0x777E8000 F:\WINNT\System32\winrnr.dll
0x777F0000 - 0x777F5000 F:\WINNT\system32\rasadhlp.dll
0x74FD0000 - 0x74FEE000 F:\WINNT\system32\msafd.dll
0x75010000 - 0x75017000 F:\WINNT\System32\wshtcpip.dll
0x77920000 - 0x77943000 F:\WINNT\system32\imagehlp.dll
0x72A00000 - 0x72A2D000 F:\WINNT\system32\DBGHELP.dll
0x690A0000 - 0x690AB000 F:\WINNT\system32\PSAPI.DLL
Local Time = Wed Mar 08 17:24:41 2006
Elapsed Time = 9294
# The exception above was detected in native code outside the VM
# Java VM: Java HotSpot(TM) Client VM (1.4.1_03-b02 mixed mode)
#

I'm having the same problem.
One potential solutions is to use a custom SQL server JDBC driver instead of going through the ODBC bridge. This will minimize dependencies and should also improved performance. Hope this helps.
- Joe

Global transaction problem with JDriver/Oracle and Oracle XA

We are haveing serious problems with Container Managed Transactions on Bea 6.1
and Oracle with EJB having set "Required" for all methods. We have tried in vain
to make it work with JDriver as well as OracleXAClient. Both fail at sometime
during the execution throwing "Not called in cotext of global transaction" (with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this one with oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData metaData = dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null, tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from global transaction.
Interesting thing is that with OracleXA, it doesnt say this exception at this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB, we used
direct jdbc connection and then did away with it. Now all next sql queries were
executed against oracle pool using XA data source with OracleXAClient. But at
some point we again ran into the problem "XAER_PROTO : Routine was invoked in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.

AFAIR this issue was resoved by moving tx opreations out from non-tx
methods.
Regards,
Slava
"Apurb Kumar" <[email protected]> wrote in message
news:[email protected]...
Jawad,
It would be nice if you can post the full stack trace error message. Didyou try moving to
the latest service pack (sp2) for WLS6.1.
Thanks,
Jawad Mahmood wrote:
Yes we had correctly set TXDataSource and let it to point to the right
connection
pool each time and it worked well with oracle thin driver but not whenwe switched
the pool to JDriver or OracleXAClient. Note that we could aways confirmthat pool
was successfully created alongwith we could retrieve connection from itvia TXDatSource,
things gave problem after we attempted to do what i had mentioned in mylast posting.
>>
Also with JBoss 2.4.4 things work pretty well. So couldnt be our codeproblem.
"Slava Imeshev" <[email protected]> wrote:
Jawad,
Did you set up TxDataSource?
Regards,
Slava Imeshev
"Jawad Mahmood" <[email protected]> wrote in message
news:[email protected]...
We are haveing serious problems with Container Managed Transactionson
Bea 6.1
and Oracle with EJB having set "Required" for all methods. We havetried
in vain
to make it work with JDriver as well as OracleXAClient. Both fail atsometime
during the execution throwing "Not called in cotext of global
transaction"
(with
JDriver) OR "XAER_PROTO : Routine was invoked in an
inproper context start() failed on resource 'OracleXAPool'" (this onewith
oracle
XA).
1.) Weblogic JDriver-XA:
DatabaseMetaData _metaData =
_dataSource.getJDBCConnection.getMetaData();
ResultSet resultSet = metaData.getTables(null, null,tableName.toUpperCase(),
new String[]{"TABLE"});
This fails immmediately saying that it was not called from globaltransaction.
Interesting thing is that with OracleXA, it doesnt say this exceptionat
this
check point.
2) Oracle XA
Okie, we couldnot read through the CLOB using it so for reading CLOB,we
used
direct jdbc connection and then did away with it. Now all next sqlqueries
were
executed against oracle pool using XA data source with
OracleXAClient.
But
at
some point we again ran into the problem "XAER_PROTO : Routine wasinvoked
in
an
inproper context start() failed on resource 'OracleXAPool'"
3 Oracle Thin Driver
everything always works with it.
Apurb Kumar

Transaction control with DI Server and B1WS

Similar Messages

Maybe you are looking for