UIX - unable to turn off client and server side field validation

Hello,
I've scoured the forums for info on how to turn off client / server side field validation, for the very common case of a Cancel button. Here's the use case:
User enters a page displaying records of some kind that can be edited, or an option to create a new one. User clicks create, is taken to a new data entry form. Before entering any data, the user decides he isn't interested, and clicks the cancel button.
The problem I'm having is that I'm getting messages that required fields have no values. I have found several references on this forum that setting the submitButton attribute unvalidated="true" will turn off client side validation. Here's what my submitButton looks like:
<submitButton text="Cancel" event="success" unvalidated="true"/>
But I am still getting errors, such as:
JBO-27014: Attribute ListName in DealerListAppModule.WebDlrListsView1 is required
Now I have also seen references in the forums to turning off server side validation by overriding the validatModelUpdates method in the DataAction. I have done this too. No luck.
Any ideas why this isn't working? I have seen other posts in the forums stating that there were improvements in JDev 10.1.2 that caused a create but not insert, where you could just navigate away from the page you were on, without having to worry about rolling back the create of a new record. I am also not seeing this behavior either. I am using 10.1.2, completely updated, but when I execute a create, if I navigate back from the create page to the original one without saving (i had to fool with this to get it to work because of the validation problems above), I am still seeing the blank, created record in my rowset. I originally created my project in 9.0.5.2, but am now using 10.1.2, and having migrated the project.
So what's the deal? What's the definitive way to turn off both client side and server side validation, and what's the status of this create but not insert functionality?
Brad

Haven't worked with this but possibly this method of "deactivation" is not valid in 11gR2? Have you cross checked that with Oracle support?

Similar Messages

Unable to turn off Suggestions and history in Safari search, Unable to turn off Suggestions and history in Safari search

Not matter what I try, including turning off "Search Engine Suggestions and Preload Top Hits", when I start to type in the Safari/Google search bar, it pulls up "Top Hits and Bookmarks and History"
Any suggestions on how to stop this from happening?

There is no way to turn off all suggestions when you type, unless you're using Private Browsing mode.
The "Search Engine Suggestions" only disables sending what you type to the selected search engine (Google, Bing, etc.). It does not prevent Safari from providing suggestions based on your browsing history and your bookmarks stored locally on disk.
To enable Private Browsing mode, tap the address view, then tap "Private" button on top of the keyboard. After enabling Private Browsing, no more suggestions will be listed from history or bookmarks, and if "Search Engine Suggestions" are off, then nothing should be listed.

Disable ADF Client and Server side validation during drop down changes

In my ADF Faces there is PanelFormLayout containing dropdown with country code value. Changing the dropdown value should change the layout to different country.
If the data is proper in the form the Layout changes perfectly but if the data is not proper it gives client validation & the layout doesn't get changed.
I want to disable the client/server side validation while changing the dropdown.

Hi Just framing the Question once again -
In my ADF Faces there is PanelFormLayout containing dropdown with country code value. Changing the dropdown value should change the layout to different country.
If the data is proper in the form, the Layout changes perfectly but if the data is not proper it gives client validation & the layout doesn't get changed.
I want to disable the client side validation just for that page or panelformLayout
Issue -
If the data is incorrect on the form, user is able to change the countrycode from the dropdown but the layout doesn't changes because client validation is stopping.
Below is the code -
1) Changing the drop down cause the switcher to call the code - defaultFacet="#{backingBeanScope.AddressComp.displayType}" which changes the layout.
2) But if the data is not correct the country value is getting change with the new Country but the Layout is unable to get change. ADF start showing client validation.
<af:panelGroupLayout id="pglA1" partialTriggers="plcol1:table1 *usCountryId caCountryId*">
     <af:switcher binding="#{backingBeanScope.AddressComp.switcherComp}" defaultFacet="*#{backingBeanScope.AddressComp.displayType}*">
          <f:facet name="US">
               <af:panelFormLayout>
                    <af:selectOneChoice value="#{bindings.CntryCd.inputValue}" label="#{bindings.CntryCd.label}" required="#{bindings.CntryCd.hints.mandatory}"
     id="usCountryId" autoSubmit="*true*">
                    <f:selectItems value="#{bindings.CntryCd.items}" id="si14"/>
               </af:selectOneChoice>
               </af:panelFormLayout>
          </f:facet>
          <f:facet name="CA">
                    <af:panelFormLayout>
                    <af:selectOneChoice value="#{bindings.CntryCd.inputValue}" label="#{bindings.CntryCd.label}" required="#{bindings.CntryCd.hints.mandatory}"
     id="caCountryId" autoSubmit="true">
                    <f:selectItems value="#{bindings.CntryCd.items}" id="si14"/>
               </af:selectOneChoice>
          </af:panelFormLayout>
          </f:facet>
     </af:switcher>
</af:panelGroupLayout>

I am unable to turn off passcode

I am unable to turn off passcode and the passcode lock section "Turn Passcode Off" appears grey and its inaccessible.
And I am using iphone 4 and iOS 7.1.2.
Thanks in advance.

Yes, I have exchange email account in my phone.
Thanks for the information.
Cheers

Client side load balancing and server side load balancing

Hello Team,
I need to know how to set up client and server side load balancing in oracle rac. What all things to be implemented like creating a service, tnsnames.ora settings etc.
And also if i used SCAN ip instead of VIP. how the settings will change.
Regards,

Hi,
please find here an Whitepaper with the information
http://www.oracle.com/technetwork/database/features/availability/maa-wp-11gr2-client-failover-173305.pdf
kind regards

HT4623 I have an apple 3gs Iphone and in the middle of a restore settings it came up with an error message and i have only the dark screen with the apple sign on it. I am unable to turn off or complete the update what can i do ?

In he middle fo a restore i got a message re the battery and i am unable to get mu i phone back on as i have a dark screen with the apple sign on it I am unable to turn off or charge Help!!!

http://support.apple.com/kb/HT1808

I am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however halfway through the download it says that the network has been disconeccted and to adjust my setting. very frustrating!!!

i am unable to download updates for my iphone 4 using my pc. i have turned off firewall and spam however the downloadkeeps stopping about halfway through saying i have been disconnected from the network and to check my settings. very frustrating! help!

Hi Jen. My daughter just compleated her nursing program and is now working as a full time nurse. Focus and study hard and soon you will be there too. Now to the problem at hand. I have the same problem. I gave up on it and satisfied myself with my iPod without the upgrade. Reason being I've read so many posts of people having problems after the upgrade. But I'm sure other factors are involved. Nevertheless here is the fix most say works to solve the problem: What ever virus protection you have installed on your computer, disable it. Then try to install the update. After that enable the protection. I had Kaspersky, and it does it's job well. The thinking is, the virus protection is blocking the upgrade. Hope this works. Charlie

Unable to turn off voice over and all of a sudden the touch screen is extremely slow to respond.

I am unable to turn off Siri/voice over and the touch screen is nearly unresponsive. Brought it to Best Buy to have the geeks look at it and and weren't really receptive unless I ponied up some cash for a service plan. Was hoping someone could help me out. Thanks!

- What hapens when you
Triple click the home button and try going to Settings>General>Accessibility and turn VoiceOver off. You may have to use three fingers to scroll the screen to get there. I
- Next see the following for how to turn off via iTunes:
iPhone: Configuring accessibility features (including VoiceOver and Zoom)
- Then try:
- Reset the iOS device. Nothing will be lost
Reset iOS device: Hold down the On/Off button and the Home button at the same time for at
least ten seconds, until the Apple logo appears.
- Reset all settings
Go to Settings > General > Reset and tap Reset All Settings.
All your preferences and settings are reset. Information (such as contacts and calendars) and media (such as songs and videos) aren’t affected.
- Restore from backup. See:
iOS: How to back up
- Restore to factory settings/new iOS device.
If still problem, make an appointment at the Genius Bar of an Apple store since it appears you have a hardware problem.
Apple Retail Store - Genius Bar

HT201493 Is there a way to be able to set a lock on my sons phone so he is unable to turn off and/or delete the Find Friends app?

Is there a way to be able to set a lock on my sons phone so he is unable to turn off and/or delete the Find Friends app?

You can keep him from deleting it by going to Settings>General>Restrictions, tap Enable Restrictions, enter a passcode* then turn Deleting Apps to Off. This will prevent him from deleting any apps on the phone without the restrictions passcode. I don't think you'll be able to prevent him from turning off the app, however.
* Important: Make sure you remember/write down the restrictions passcode. If you ever forget it, you will have to restore the phone as a new device without using a backup to remove it, losing all data on the phone.

Iphone 4 turns off randomly and unable to turn it on without charger

iphone 4 turns off randomly and unable to turn it on without connecting to charger or PC

Hey Tiffy6996!
I have an article here for you that describes this issue and can help you troubleshoot the issue a little further:
iPhone: Hardware troubleshooting
http://support.apple.com/kb/ts2802
Will not turn on, will not turn on unless connected to power, or unexpected power off
Verify that the Sleep/Wake button functions. If it does not function, inspect it for signs of damage. If the button is damaged or is not functioning when pressed, seek service.
Check if a Liquid Contact Indicator (LCI) is activated or there are signs of corrosion. Learn about LCIsand corrosion.
Connect the iPhone to the iPhone's USB power adapter and let it charge for at least ten minutes.
After at least 30 minutes, if:
The home screen appears: The iPhone should be working. Update to the latest version of iOS if necessary. Continue charging it until it is completely charged and you see this battery icon in the upper-right corner of the screen . Then unplug the phone from power. If it immediately turns off, seek service.
The low-battery image appears, even after the phone has charged for at least 20 minutes: See "iPhone displays the low-battery image and is unresponsive" symptom in this article.
Something other than the Home screen or Low Battery image appears, continue with this article for further troubleshooting steps.
If the iPhone did not turn on, reset it while connected to the iPhone USB power adapter.
If the display turns on, go to step 4.
If the display remains black, go to next step.
Connect the iPhone to a computer and open iTunes. If iTunes recognizes the iPhone and indicates that it is in recovery mode, attempt to restore the iPhone. If the iPhone doesn't appear in iTunes or if you have difficulties in restoring the iPhone, see this article for further assistance.
If restoring the iPhone resolved the issue, go to step 4. If restoring the iPhone did not solve the issue, seek service.
Thanks for coming to the Apple Support Communities!
Cheers,
Braden

Connection between SDM client and server is broken

Dear All,
First of all this is what I have
-NW04 SPS 17
-NWDS Version: 7.0.09 Build id: 200608262203
-using VPN connection
-telnet on port 57018 is succesfull
I can login to SDM server (from NWDS and from SDM GUI) I can see the state of SDM(green light), restart it, can navigate through tabs in GUI, but every time I am trying to deploy an ear i have this error:
Deployment exception : Filetransfer failed: Error received from server: Connection between SDM client and server is broken
Inner exception was :
Filetransfer failed: Error received from server: Connection between SDM client and server is broken
I have already read a lot of topics,blogs,notes but didn't find the solution.
Can anybody help me?
Best Regards

Having same issue. Nothing helped so far... Using NWDS 7.0 SP18.
I have turned SDM tracing on and this is what I see on client side after sending first data package:
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/17 Client: finished sending string part"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0280/0 Client: receive String part from Server"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl.receiveFromServer(NetComm ..): Entering method
com.sap.bc.cts.tp.net.NetComm.receive(): Entering method
com.sap.bc.cts.tp.net.NetComm: debug "Method "receive(char[])" could not read all requested bytes. There are still 12 bytes to read"
com.sap.bc.cts.tp.net.NetComm: debug "Caught IOException during read of header bytes (-1, 43):Connection reset"
com.sap.bc.cts.tp.net.NetComm: debug " throwing IOException(net.id_000001)"
com.sap.bc.cts.tp.net.NetComm.receive(): Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/1 Client: connection was broken"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: debug "20120224140253 0281/0 Client: finshed sendAndReceive"
com.sap.sdm.is.cs.cmd.client.impl.CmdClientImpl: Exiting method
My connection on server is still active so I have to restart SDM server to reset and try it again.
Anyone have idea whats happening?
Edited by: skyrma on Feb 24, 2012 2:46 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM
Edited by: skyrma on Feb 24, 2012 2:47 PM

Async tcp client and server. How can I determine that the client or the server is no longer available?

Hello. I would like to write async tcp client and server. I wrote this code but a have a problem, when I call the disconnect method on client or stop method on server. I can't identify that the client or the server is no longer connected.
I thought I will get an exception if the client or the server is not available but this is not happening.
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
How can I determine that the client or the server is no longer available?
Server
public class Server
private readonly Dictionary<IPEndPoint, TcpClient> clients = new Dictionary<IPEndPoint, TcpClient>();
private readonly List<CancellationTokenSource> cancellationTokens = new List<CancellationTokenSource>();
private TcpListener tcpListener;
private bool isStarted;
public event Action<string> NewMessage;
public async Task Start(int port)
this.tcpListener = TcpListener.Create(port);
this.tcpListener.Start();
this.isStarted = true;
while (this.isStarted)
var tcpClient = await this.tcpListener.AcceptTcpClientAsync();
var cts = new CancellationTokenSource();
this.cancellationTokens.Add(cts);
await Task.Factory.StartNew(() => this.Process(cts.Token, tcpClient), cts.Token, TaskCreationOptions.LongRunning, TaskScheduler.Default);
public void Stop()
this.isStarted = false;
foreach (var cancellationTokenSource in this.cancellationTokens)
cancellationTokenSource.Cancel();
foreach (var tcpClient in this.clients.Values)
tcpClient.GetStream().Close();
tcpClient.Close();
this.clients.Clear();
public async Task SendMessage(string message, IPEndPoint endPoint)
try
var tcpClient = this.clients[endPoint];
await this.Send(tcpClient.GetStream(), Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async Task Process(CancellationToken cancellationToken, TcpClient tcpClient)
try
var stream = tcpClient.GetStream();
this.clients.Add((IPEndPoint)tcpClient.Client.RemoteEndPoint, tcpClient);
while (!cancellationToken.IsCancellationRequested)
var data = await this.Receive(stream);
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(NetworkStream stream, byte[] buf)
await stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive(NetworkStream stream)
var lengthBytes = new byte[4];
await stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await stream.ReadAsync(buf, 0, buf.Length);
return buf;
Client
public class Client
private TcpClient tcpClient;
private NetworkStream stream;
public event Action<string> NewMessage;
public async void Connect(string host, int port)
try
this.tcpClient = new TcpClient();
await this.tcpClient.ConnectAsync(host, port);
this.stream = this.tcpClient.GetStream();
this.Process();
catch (Exception exception)
public void Disconnect()
try
this.stream.Close();
this.tcpClient.Close();
catch (Exception exception)
public async void SendMessage(string message)
try
await this.Send(Encoding.ASCII.GetBytes(message));
catch (Exception exception)
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.SafeInvoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
private async Task Send(byte[] buf)
await this.stream.WriteAsync(BitConverter.GetBytes(buf.Length), 0, 4);
await this.stream.WriteAsync(buf, 0, buf.Length);
private async Task<byte[]> Receive()
var lengthBytes = new byte[4];
await this.stream.ReadAsync(lengthBytes, 0, 4);
var length = BitConverter.ToInt32(lengthBytes, 0);
var buf = new byte[length];
await this.stream.ReadAsync(buf, 0, buf.Length);
return buf;

Hi,
Have you debug these two applications? Does it go into the catch exception block when you close the client or the server?
According to my test, it will throw an exception when the client or the server is closed, just log the exception message in the catch block and then you'll get it:
private async void Process()
try
while (true)
var data = await this.Receive();
this.NewMessage.Invoke(Encoding.ASCII.GetString(data));
catch (Exception exception)
Console.WriteLine(exception.Message);
Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host.
By the way, I don't know what the SafeInvoke method is, it may be an extension method, right? I used Invoke instead to test it.
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to completely turn off Bluetooth and Wireless

Hey everybody,
I'm running Windows XP SP3 via Boot Camp and I was wondering if anyone can assist me in how to completely turn off Bluetooth and Wireless connectivity so that I can reserve as much batter life while being in class taking notes without a plug-in source, but not uninstall. I know there is a Bluetooth control panel and I disabled it there but under "connect to" its still remains there. Basically I want to have the Bluetooth and Wireless turned off completely when I startup and still have the icons shown in the taskbar to let me know that they are still there.
Thanks!

Joergen Thomson, I can see that you have the same thoughts like I do, I wish they could release a software that is stable and better then this.
I dont have the energi or time to report all flaus back to cisco, this product have taking to much of my time and frustration already. Thank you so much for all the time you spend to try get this product stable and hopefully a good product.
I have a costumer that have a webservice that is IP restricted, For now I have to define more then 93 policys openening for the same service because this doesnt handle address list and groups. And all the times I had to set it back to factory default becasue of HTTP Admin server stopped, VPN Problem, Firmware Upgrades, "Packet Loss" and so on takes alot of time becasue I need to reconfig policies back.
For now to they release a firmware is stable I have take this piece off the network and put the back a old Fortinet 60 box.

Socket communication between client and server

Hi all,
I am doing an assignment for communication between java client and java server using sockets. This communication is in the form of XML documents. I am facing a problem in this communication.
Actually at Server side I'm creating an XML document(Document type object) using DocumentBuilderFactory in javax.xml.parsers package and transforming this Document into a stream using StreamResult.
My code is :
Transformer xmlTransformer = TransformerFactory.newInstance().newTransformer();
StreamResult xmlString = new StreamResult(currentClientHandler.getSocketOutputStream());
DOMSource xmlDocSource = new DOMSource(xmlDocument); // xmlDocument is Document type reference
xmlTransformer.transform(xmlDocSource, xmlString);
so, this xmlString(i.e. StreamResult) is passed directly into the output stream. Here I need to close() output stream after transform() call to help SAX parser to know about end of stream.
Now at Client side, I am parsing this stream using SAX parser. It parses this correctly. But when sending some another data back to Server when client opens output stream, it given Socket closed exception. I know that closing input or output stream closes socket. But in my problem, I have to send data in streams and not by using files or byte[] etc.
So what is nearest solution to problem ??
Plz help me. Any kind of help will be greatly appreciated.

hi
thanks for ur reply.
I didnt get any error msg while getting the back the datas.
Actually i divided my application into two parts.
My application will act as both server and client.
server ll get the browser request and send to the client and the client will send that data to the c++ server.
Im able to do that.and unable to get the data from server.
Didnt get any error.
can u tell me how to make an application to act as both client and server.
I think im wrong in that part.
thanks a lot

S400 unable to turn off wireless

Hi , I am unable to turn off or on wifi/bluetooth with the f7 key(alternatiely the wireless key). wifi and bluetooth are enabled always whch i feel is power consuming when not required. the key seems to be unusable.
netbook config is :
i3, 2gb ram, atheos ar9285 wireless lan adapter, atheos ar3011 bluetooth adapter
i have installed both the wireless drivers from lenovo support.
what should i do to correct this.

hi Pravinrajpaul,
Welcome to the Lenovo Forums.
If you're running Windows 8, pressing the Airplane Mode (F7) turns OFF both the Wireless and Bluetooth radio. If you want to turn off just the Blueooth though, you will need to do it manually by:
1. Opening Device Manager (press Win Key+X > choose Device Manager)
2. Expand Bluetooth Radios then right click > disable the blueooth adapter.
3. For the wireless, choose Network Adapters under Device Manager and right click > disable the wireless module or boot into the BIOS by pressing the One Key Recovery button and under the Configuration Tab, set Wireless LAN Support to Disabled.
Hope this helps.
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

UIX - unable to turn off client and server side field validation

Similar Messages

Maybe you are looking for