Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
Unable to charge my Ipad 4 with my Laptop (HP 7010tx) USB . I am Getting error message as "Not Charging" . Please give a solution for this ...???
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W (5W on Mini) USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Best Practices for iPad Battery Charging
http://www.ilounge.com/index.php/articles/comments/best-practices-for-ipad-batte ry-charging/
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom
Similar Messages
-
my ipad is taking restart automatically and screen is fully balck and showing only apple logo.please give me solution for that
Have you tried a reset first? If it works, you won't have to go through the restore process.
Hold down the sleep (upper right hand top) and the home button at the same time. A slider will appear. Ignore it and keep holding down the buttons. The Apple logo shoud appear. Then your ipad might work again. It takes a good 15 seconds. You will not lose anything on your ipad.
If you try it a couple of times and it doesn't work, you might have to go through the restore process as has been suggested above. But follow the steps so you don't lose your data.
Hope this helps. -
please please can some one tell me how do you charge ur ipad with ur laptop. it doesn't chage wen I put use the wire. only charges when I plug the socket in. Iv never used an ipad b4 so don't really know much. Hope some one knowz.
The quickest way (and really the only way) to charge your iPad is with the included 10W or 12W USB Power Adapter. iPad will also charge, although more slowly, when attached to a computer with a high-power USB port (many recent Mac computers) or with an iPhone Power Adapter (5W). When attached to a computer via a standard USB port (2.5W, most PCs or older Mac computers) iPad will charge very slowly (but iPad indicates not charging). Make sure your computer is on while charging iPad via USB. If iPad is connected to a computer that’s turned off or is in sleep or standby mode, the iPad battery will continue to drain.
Apple recommends that once a month you let the iPad fully discharge & then recharge to 100%.
How to Calibrate Your Mac, iPhone, or iPad Battery
http://www.macblend.com/how-to-calibrate-your-mac-iphone-or-ipad-battery/
At this link http://www.tomshardware.com/reviews/galaxy-tab-android-tablet,3014-11.html , tests show that the iPad 2 battery (25 watt-hours) will charge to 90% in 3 hours 1 minute. It will charge to 100% in 4 hours 2 minutes. The new iPad has a larger capacity battery (42 watt-hours), so using the 10W charger will obviously take longer. If you are using your iPad while charging, it will take even longer. It's best to turn your new iPad OFF and charge over night. Also look at The iPad's charging challenge explained http://www.macworld.com/article/1150356/ipadcharging.html
Also, if you have a 3rd generation iPad, look at
Apple: iPad Battery Nothing to Get Charged Up About
http://allthingsd.com/20120327/apple-ipad-battery-nothing-to-get-charged-up-abou t/
Apple Explains New iPad's Continued Charging Beyond 100% Battery Level
http://www.macrumors.com/2012/03/27/apple-explains-new-ipads-continued-charging- beyond-100-battery-level/
New iPad Takes Much Longer to Charge Than iPad 2
http://www.iphonehacks.com/2012/03/new-ipad-takes-much-longer-to-charge-than-ipa d-2.html
Apple Batteries - iPad http://www.apple.com/batteries/ipad.html
Extend iPad Battery Life (Look at pjl123 comment)
https://discussions.apple.com/thread/3921324?tstart=30
New iPad Slow to Recharge, Barely Charges During Use
http://www.pcworld.com/article/252326/new_ipad_slow_to_recharge_barely_charges_d uring_use.html
Tips About Charging for New iPad 3
http://goodscool-electronics.blogspot.com/2012/04/tips-about-charging-for-new-ip ad-3.html
How to Save and Prolong the battery life of your new ipad
https://discussions.apple.com/thread/4480944?tstart=0
Prolong battery lifespan for iPad / iPad 2 / iPad 3: charging tips
http://thehowto.wikidot.com/prolong-battery-lifespan-for-ipad
iPhone, iPod, Using the iPad Charger
http://support.apple.com/kb/HT4327
Install and use Battery Doctor HD
http://itunes.apple.com/tw/app/battery-doctor-hd/id459702901?mt=8
To Extend a Device’s Battery Life, Get to Know It Better
http://tinyurl.com/b67c7xz
iPad Battery Replacement
http://www.apple.com/batteries/replacements.html
In rare instances when using the Camera Connection Kit, you may notice that iPad does not charge after using the Camera Connection Kit. Disconnecting and reconnecting the iPad from the charger will resolve this issue.
Cheers, Tom -
IPAD is Disabled, tried to connect via itunes but get error "iTunes could not connect to the [device] because it is locked with a passcode. You must enter your passcode on the [device] before it can be used with iTunes."
iOS: Device disabled after entering wrong passcode
http://support.apple.com/kb/ht1212
How can I unlock my iPad if I forgot the passcode?
http://tinyurl.com/7ndy8tb
Using iPhone/iPad Recovery Mode
http://ipod.about.com/od/iphonetroubleshooting/a/Iphone-Recovery-Mode.htm
Saw this solution on another post about an iPad in a school enviroment. Might work on your iPad so you won't lose everything.
~~~~~~~~~~~~~
‘iPad is disabled’ fix without resetting using iTunes
Today I met my match with an iPad that had a passcode entered too many times, resulting in it displaying the message ‘iPad is disabled – Connect to iTunes’. This was a student iPad and since they use Notability for most of their work there was a chance that her files were not all backed up to the cloud. I really wanted to just re-activate the iPad instead of totally resetting it back to our default image.
I reached out to my PLN on Twitter and had some help from a few people through retweets and a couple of clarification tweets. I love that so many are willing to help out so quickly. Through this I also learned that I look like Lt. Riker from Star Trek (thanks @FillineMachine).
Through some trial and error (and a little sheer luck), I was able to reactivate the iPad without loosing any data. Note, this will only work on the computer it last synced with. Here’s how:
1. Configurator is useless in reactivating a locked iPad. You will only be able to completely reformat the iPad using Configurator. If that’s ok with you, go for it – otherwise don’t waste your time trying to figure it out.
2. Open iTunes with the iPad disconnected.
3. Connect the iPad to the computer and wait for it to show up in the devices section in iTunes.
4. Click on the iPad name when it appears and you will be given the option to restore a backup or setup as a new iPad (since it is locked).
5. Click ‘Setup as new iPad’ and then click restore.
6. The iPad will start backing up before it does the full restore and sync. CANCEL THE BACKUP IMMEDIATELY. You do this by clicking the small x in the status window in iTunes.
7. When the backup cancels, it immediately starts syncing – cancel this as well using the same small x in the iTunes status window.
8. The first stage in the restore process unlocks the iPad, you are basically just cancelling out the restore process as soon as it reactivates the iPad.
If done correctly, you will experience no data loss and the result will be a reactivated iPad. I have now tried this with about 5 iPads that were locked identically by students and each time it worked like a charm.
~~~~~~~~~~~~~
Try it and good luck. You have nothing more to lose if it doesn't work for you.
Cheers, Tom -
Need help-
On my mac with yosemite, when trying to install my own brushes, I get error message: "Could not load the brushes "blahblah.abr" because the file is not compatible with this version of PS" (PS CC 2014) ????Thank you station_two but I did install them in my
applications>adobe>presets>brushes and still I get this error message......
On Tue, Dec 2, 2014 at 6:20 PM, station_two <[email protected]> -
Have not used Itunes in a while and I cant access Itunes Store with out downloaded new version but I keep getting error message with download. Can I just access the Istore without downloading new version?
downloaded new version but I keep getting error message with download.
What does the error message say, andrea? (Precise text, please.) -
I have facing problem of charging my I pad through USB power adapter. It is not giving any response when connected to power adapter. When it is connected with USB port of computer it is charging with sign of "not charging" and it takes long time to cahrge. please help me to sove my problem.
I have no idea why the iPad would not be charging with another power adapter but will charge thought the USB port on your computer. Try rebooting the iPad.
Reboot the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider if it appears on the screen - let go of the buttons. Let the iPad start up
If that doesn't help, I think that the next thing that I would try would be to reset all settings. Settings>General>Reset>Reset all settings. If you do this, all device settings will have to be re-entered and tha does take some time to do. -
I've recently upgraded my iPad to OS 5 and I am running iTunes 10 on my MacBook Pro. For some unexplainable reason, I'm now getting a message that items (mainly TV shows I've purchased through iTunes) are not able to be downloaded because the computer is "not authorized." But the computer IS authorized. I follow the instructions to "authorize" it and, of course, I'm then told that the computer is already authorized! Still, the downloads won't sync.
Can anyone help me out with this?I have the same problem. It is only with tv shows and only with programs I have downloaded after the software update.
Apple support sent me the above link too....but it doesn't solve the problem...my computer is authorized and the content is in my library and will play on my Mac air, but it will not sync the tv shows, it keeps saying my computer isn't authorized for it.
No answers here, but you are definitely not alone with this issue. -
Please help, it is not working, I'm not even joking how can I fix this and how much would it cost?
Try this:
Settings>General>Reset>Reset All Settings
Reset All Settings does not delete anything, all it does is take most of the iPad's settings back to default (with the exception of accounts setting, and maybe a couple other things.) It is perfectly safe.
The only inconvenience is that you have to go back through almost all your settings and set them to your preference. -
Getting error message file not found unable to sync to ipod
90 percent of my music from my playlists wont load to my ipod. It has loaded in the past nut now i get message file not found unable to sync. Meanwhile I can play all of this music out of itunes I just cant seem to load it to my ipod. why? all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be. plaese help
+all of the songs in the playlists seem to have an "!" next to them in the track list. That is until i play them then it goes away im not sure if these things are related but i think they may be.+
Yes, I'm sure they are related. I have no idea how your PC/itunes got into that state. What's happening now, is itunes thinks it doesn't know where the file is on your PC's hard drive, but when you double-click it, it mysteriously finds it.
I suspect after itunes finds it again, it will load to your ipod.
Is this music on an external HD? -
I try and download the new Outlook update and it says I have to close sync services agent and others.I do that,or 'think' I do but it doesn't close.
PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!! -
Having trouble with the Check Out (Registration - Buy) template - keep getting error message!
Hello!
Hoping somone can help me with this. I've been struggling for a while and must get this finished. I am using BC ecommerce and PayPal standard. I have set up my item, templates, etc. I'm testing the function and can get through until the checkout. When I try to checkout, I get an error message that says:
"ERROR: You have deleted your web form. Please login to the Admin panel of your website and remove the previously submitted form from the web page you last visited. You will need to recreate this web form by going to Modules -> Webforms. After recreating simply insert this new web form into the web page and your web form should work properly."
I edited the Registration - Buy template to only include PayPal as the payment method (though I don't see how this form functions).
I followed the instructions on the kb site to set up PP standard (PDT token and all that) and have set that up in the gateway section.
I can get to the item, add it to the cart, get to the cart, checkout button brings me to the checkout page, but then stuck.
I'd appreciate any help you can offer as I'm behind on this now. Thank youThank you for your quick reply Liam! You know, I checked the web forms list when I got that error message and the form isn't there. I was having trouble the other day when another of my forms kept getting deleted.
Sorry if this is a stupid question (I'm a BC newbie) but I want to be sure so I can get this project finished... The proper workflow would be to create this form myself in Web Forms then insert it into the Registration - Buy template using the modules toolbox?
Thanks to you I may get this done on time still... if my PayPal set up works -
I am trying to retrieve the information on my hard drive after I spilled liquid on my keyboard . I can get to Disk Utility by using the boot up disk but when I try and copy the hard drive to an external device using "New Image" it tells me it is unable to create a copy because it "cannot allocate memory".
Were you able to get any help with this problem? My MacBook Pro out of the blue wouldn't boot up all the way and now I'm trying to get a copy of everything onto the new external drive using disc utility but am having the same errors as you! Thank you for sharing any tips!! -Norah
-
Help with lost pics and contacts in upgrading and get error message when I try to restore.
I lost all pictures and contacts when I upgraded my iphone 4 (for the first time). I did not download anything because I was using a friend's computer. I read that apps not in itunes would be lost, but not pictures and I had 1500. Every time I attempt to restore, I get error messages. Please help!
If you don't have a sim card in the phone, you won't be able to activate it. You can't activate any GSM iPhone without a valid sim card installed in the phone. The sim itself need not be activated, but it must be valid & present.
-
HT5957 Ios7.0.2 keep getting error message cannot install on my IPAD 2. Please help.
Cannot install IOS 7.0.2 on my ipad 2. Keep getting error message cannot install. Please help
Perform a "hard reset" on the device by pressing down and holding the home button and the sleep/wake button for up to 30secs. until you see a black screen with the Apple logo, then release.
Then test to see if it solved the problem. Then try again.
Maybe you are looking for
-
This is a new one on me. I was working in W7 and discovered after a time there was the familiar Apple s/w Update requester behind a few windows, It showed updates for Boot Camp - over 320 M and for Itunes and Quicktime. Problem is that it was not fea
-
Hi Abapers, I have written the code like this. CLASS lcl_event_receiver DEFINITION CLASS LCL_EVENT_RECEIVER DEFINITION. PUBLIC SECTION. METHODS: HANDLE_DOUBLE_CLICK FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID
-
Qemu - Bridged networking with wireless adapter
How can I use bridged networking with wireless on Qemu virtual machine? With virtualbox it can be easily done. I don't why in Qemu it is so complicated, maybe virtualbox have completely difference mechacnism on this. I've read the wiki, it looks like
-
Regarding Includes GET_INCLUDES
hi guys, Whats the difference between using RS_GET_ALL_INCLUDES and GET_INCLUDES. I tested for my Report Program giving input to GET_INCLUDES FM its giving me one include DB_SSEL. But I did not get anything using RS_GET_ALL_INCLUDES FM for same above
-
I'm really bothered by the fact that my music album covers don't match the actual album. What can I do to fix it so they do match? Has anyone else had this problem?