I am having trouble downloading the new outlook mail.It returns error message about a sync services agent, database daemon etc. Also, I Can send an email but it returns with message: "message could not be sent." Any suggestions for this Apple novice?
I try and download the new Outlook update and it says I have to close sync services agent and others.I do that,or 'think' I do but it doesn't close.
PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!
Similar Messages
-
I want to upgrade the software (currently I have Mac OS X 10.6.4) but when the mac is downloading the new version i get an error message and is not possible get the most updated software: Mac OS X 10.6.8 or either the most recent itunes why?!?!?!
Then you either have a network problem or a hardware problem or a corrupted hard drive. You might try:
Repair the Hard Drive and Permissions
Boot from your Snow Leopard Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Utilities menu. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
You can also try downloading from another computer on a different network connection. -
Having trouble downloading the new version of itunes on Macbook, can you help me?
Hi,
I bought my computer MacBook about six years ago. I am trying to download the new version of itunes. It downloads to my computer, but then asks me for my name and installer password. The options to get that password back is to install the initial disk of the computer, which I do not have anymore or restart the computer doing some sort of steps. I am clueless when it comes to computers, so if anyone can help me that would be awsome!
My computer has been running fine these past years and I would hate for the answer to be that I have to replace my MacBook for another Mac....You can purchase replacement discs from Apple:
Apple Store Customer Service at 1-800-676-2775 or visit online Help for more information.
To contact product and tech support: Apple - Support - Contact Apple Support.
Forgot Your Account Password
For Lion, Mountain Lion, or Mavericks
Boot to the Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
When the menubar appears select Terminal from the Utilities menu.
Enter resetpassword at the prompt and press RETURN. Follow
instructions in the dialog window that will appear.
Or see:
Reset a Mac OS X 10.7 Lion Password
OS X Mountain Lion- Reset a login password,
OS X Mavericks- Solve password problems,
OS X Lion- Apple ID can be used to reset your user account password.
For Snow Leopard and earlier with installer DVD
Mac OS X 10.6- If you forget your administrator password,
OS X- Changing or resetting an account password (Snow Leopard and earlier).
For Snow Leopard and earlier without installer DVD
How to reset your Mac OS X password without an installer disc | MacYourself -
I just downloaded the new iTunes and now receiving error message when I try to open iTunes!
After downloading the new iTunes when I try to open it i receive the following error message:
iTunes.exe - Entry Point Not Found
Procedure entry point kCMByteStreamNotification_AvailableLengthChanges could not be located in the dynamic link librabry CoreMedia.dllI am having the same issue! And I have tried everything from updates, to moving the coremedia.dll file, to uninstalling and reinstalling so many times im afraid they are not gonna let me download it anymore!!! Please can somebody help??
-
i cant download the update for the latest version of itunes on my laptop and have never had this problem before
What update? No update has been released in weeks.
What happens when you try?
Little to no assistance can be given if no details are provided. -
This problem occurs intermittently, usually for several days, then fixes itself for several days. I have tried uninstalling and reinstalling Firefox, but it doesn't seem to make any difference. This has been happening for quite a while, in both the newest release and older versions. I've asked the people at Yahoo, but they have no idea what is happening.
This problem occurs intermittently, usually for several days, then fixes itself for several days. I have tried uninstalling and reinstalling Firefox, but it doesn't seem to make any difference. This has been happening for quite a while, in both the newest release and older versions. I've asked the people at Yahoo, but they have no idea what is happening.
-
Please help me? Nothing is happening on the screen and I can't do anything. I was told to come into an apple store as my home wifi was too slow an that is why it was taking so long to install.
Did you ever resolve the iCloud problem.I am in the same position and its driving me mad!!! If you have a link to an solution I would appreciate it.
-
I keep getting err 8387& err 8003 coming up and the music does not download???
#frustrated.comHi there,
I would recommend taking a look at the troubleshooting steps found in the article below.
iTunes: Advanced iTunes Store troubleshooting
http://support.apple.com/kb/TS3297
-Griff W. -
I have a 2 server SharePoint farm.
All outgoing emails were working fine.
I just restarted both servers and now after that none of the emails are being sent. I am using OOB publishing workflow and it shows message:
The e-mail message could not be sent. Make sure the outgoing e-mail settings for the server are configured correctly.
Even if I setup Alert on some list, it doesn't send email.
I have checked that outgoing email setting in CA is defined and like I said it was working fine without problems but after restart it is showing error.
What could be the cause of this and how to fix it?
EDIT
I removed outgoing mail server in CA, added again and restart IIS but still emails from OOB workflow is not being sent. But email from Alerts are being sent. Don't know what to do now.This is really weird, It works when an alert is set but workflows doesn't send emails... Can you create a simple 1 Step workflow in SPD to send an email when a specific field is set. See if this sends an email..
AJ MCTS: SP 2010 Configuration MCSA: Windows 7 If you find this post useful kindly please mark it as an answer :) TY
I created a test workflow which sends email to user and it is also not sending email. But I am getting email from SharePoint regarding "variation" page changes as well as alerts which I told above. -
Exchange 2010 "This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80004005-00000000-00000000].
In a mixed client environment, mostly Outlook 2010 & 2013 clients. Only Outlook 2013 clients (about only 4 mailboxes) are receiving this error immediately after sending an email. My temp band-aid at the
moment is to: from the client, go into the "address book" & select a different address book like "Contacts" & then select the address again & select the Global Address List, which is the default. (it will have the users email
+ at the beginning of the field, it reads, Global Address List - (email of the user), then I close Outlook & open it back up, & the problem is solved. But on some mailboxes, not all, the issue comes back. From my research, I know that our individual
mailboxes do not send out over 500 emails in one day. Most users will send out maybe 20 or 30 in one day, so I don't think it's that.
But I'm not sure if this is related, but I have noticed that the log files for the Exchange 2010 seems to only hold logs with date stamps of only a couple of days. It used to hold log files indefinitely until they were archived, deleted, etc. So, this is
a new, unusual issue I have seen as well.
We have 2 .edb's, one active: 78 GB's and one disabled at 7 GB's. Exchange 2010 is running on Windows Server 2008 r2, Enterprise Ed. We have had Exchange 2010 running now for about almost 2 years now and this is the first time this particular issue has come
up.
Thanks.Hi,
You can refer to the following steps to rebuild an Offline Address Book.
1. Open EMS. Update OAB using the Update-OfflineAddressbook "offline address book" cmdlet. Restart Background Intelligent Transfer Service on the Mailbox server.
2. Initiate OAB replication from mail box server to CAS server. Execute for each CAS server using the Update-FileDistributionService "CASServerName" cmdlet.
3. Start Outlook and download OAB.
What's more, here is an article for your reference.
How to Quickly Rebuild an Exchange 2010 Offline Address Book
http://social.technet.microsoft.com/wiki/contents/articles/7725.how-to-quickly-rebuild-an-exchange-2010-offline-address-book.aspx
Hope this can be helpful to you.
Best regards,
Amy Wang
TechNet Community Support -
I continue to receive the error message "Could not create key: Verify that you have sufficient access to that key" when I am try to down Akamai NetSession Interface that's needed to download the adobe Photoshop elements 13 software that I purchased.
cancel the akamai download and download files 1 of 2 and 2 of 2 directly. put both in the same directory and double click the exe to start installation.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
FrameMaker: 12, 11, 10, 9, 8, 7.2
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'. -
Software: Microsoft Office 2007 Professional Plus
Service: Microsoft Office 365 - Cloud Hosted
Hello,
I have a user who receives this error when trying to send a calendar invite to her coworkers (names have been changed for privacy):
The following recipient(s) cannot be reached:
Megan Bennis on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Charity Lurk on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
Susan Parker on 3/31/2014 3:43 PM
This message could not be sent. Try sending the message again later, or contact your network administrator. Error is [0x80070005-00000000-00000000].
All three of these users are in her address book, and are all in her office residing on the same Office 365 domain account.
I have tried the troubleshooting methods outlined in this article, but they did not resolve the issue: http://theitbros.com/office-365-this-message-could-not-be-sent-try-sending-the-message-again-later/
- This entailed manually downloading/updating the address book via 'Send/Receive --> Download Address Book...'. The second method in that article had me rename/move/delete the Address Book files stored on the local machine, and then allow them to
repopulate when you open Outlook again. This also did not resolve my issue.
Any ideas? Thanks in advance!That's the kind of message you will see when trying to send on behalf of/send as another user, when you don't have the necessary permissions added. Or you are using the wrong send method, or using an outdated name cache entry, or the OAB is outdated.
-
2012 R2 Fax Server -- "The Message could not be sent. The wait operation timed out."
I receive the following error on a newly installed 2012 R2 fax server when sending from the Windows Fax and Scan console:
"The Message could not be sent. The wait operation timed out."
The test fax that fails only contains text that I type into the body. However, if I add an attachment, the fax is successful.
Any ideas??Hi,
Would you please let me confirm whether install any third-party application on the Windows Server 2012 R2?
Please perform a clean boot to eliminate software conflicts and monitor the result. Please also check if you install all necessary updates on the server.
Meanwhile, please run
sfc /scannow command to scan all protected system files and check if find issues.
Please also refer to following article and check if can help you.
Troubleshooting Your Fax Server
By the way, there is a similar thread. Please also refer to following thread and check if can help you.
Windows
Fax and scan (Windows 8)
Hope this helps.
Best regards,
Justin Gu -
i am getting the error message "could not copy to requested location" to a drive i have been using for over a year... when I do the same thing to another drive - it works just fine. why?
Possibly the drive is full
Possibly the permissions are not set to WRITE permission
Possibly there has been a "user mistake" and you think you are copying to a drive you have been using for over a year but something has accidentally changed and you're copying to a different location -
after unlocking over the phone from ATT and resetting iphone 3gs I keep getting the same error message "could not activate phone" neither Apple Store Tech or ATT were able to fix this .
Itunes displays a message saying "there is no SIM installed in the phone you're trying to activate" even if there is the same SIM that was working minutes before.
The SIM works on a different phone I tested it.
Any ideas?? TKS Sandro“Could Not Activate EDGE” error message Update ...
Well it’s going on day 6 and still sporadic to no EDGE on my iPhone. At one time, it was thought to be a defective iPhone – since my partner’s iPhone works just fine.
After over three hours on the land line with AT&T and Apple, I was sent to the local Apple store for a replacement. Of course, as soon as I walked into the Apple store my iPhone worked just fine. ;-( The local store replaced my iPhone and suggested I go home and activate the phone as a NEW iPhone, that way if there was a bug in my data it would not carry over to the new phone. Did that and well… still sporadic to no EDGE. By the way, I have the Big White “E” to the right of the 5 bars and AT&T .
AT&T said last week they has “Software” issues in my area, but the CSR I talked to did not know what the issues were or if they were the cause of my problems. He did say they would call me back today to see how my iPhone was doing, but alas, no call back.
When I’m next to my partner, trying to access the same feature, his iPhone is just so fast. Mine hangs up, draws out and finally I get the error message, “Could Not Activate EDGE”. I am updated to version “1.1.4(4A102)”. New (refurbished) iPhone direct from Apple.
I remember reading a while back about some problems others had when they upgraded to from 1.1.3 to 1.1.4. I never had those problems, but it sure looks like they may have started. Does anyone remember what the problems with 1.1.4 were, what was done if anything to correct them, and best of all any suggestions?
By the way, this is Seattle, not some small – out of the way place where connection and signal strength is expected to be second rate. Also, I had full function of my iPhone from the day I bought it in June 2007, all the way up to Thursday March 20, at 2120.
Thanks
Joe
Maybe you are looking for
-
Chinese characters scrambled when loading from DS to BW
Hi, I've been pulling my hair out with this issue. I have a flat file containing Chinese text. When I load this in BW using 'FLATFILE' as a source system, it works fine. BW shows the correct Chinese characters. When I do the same load using BODI, I g
-
What are the permitted compression techniques for PDF/A-1?
The PDF/A-1 standard does not specify how compression is performed. What are the permitted compression techniques for PDF/A-1? The information I have gathered (not sure if all are true) LZW should not be used JPEG2000 may not be used Few say, JPEG ca
-
Getting photos from my ipad back to my Mac that are NOT in camera roll.
Our hard drive failed and my back up files were corrupt so I lost my entire digital life including my iphotos. I had set up my ipad to sync several folders from iphoto to my ipad when I did an itunes sync. All of these photos and folders are curr
-
Windows server 2012 standard second DNS server not automaticly detected by Windows 7.
Hi! We have configured a second DNS server on our domain just in case. I have tested the second DNS by activating manually the second dns server in the IPV4 config in windows 7 pro. My question is: the second DNS server is not supposed to be detected
-
I am running ubuntu on an AMD 64 bit system. I have installed firefox as part of the distribution. I need to run a 32-bit java app with the 32-bit jre plugin. When I install the 32-bit jre plugin per http://www.oracle.com/technetwork/java/javase/manu