Unable to release 800 sales orders at one go in ByD

We have 800 sales orders which are Preparation status. When we try to release all the 800 sales orders we have experienced system crash/dump twice roughly 11-12 mins into the process. At the end of the processing none of the sales orders got released. Could you please advise how can we release all the 800 sales orders at one go and complete the process without any dumps. Could someone please advise on this?
Many Thanks,

The reason why the 800 sales orders are not releasing at one go is that Release function on sales order is performing ATP checks and it is locating if the products are in place etc., and then after confirming all the checks, it is releasing the sales order. I am exploring the possibility of writing an SDK solution of releasing the sales order without having to perform these checks and perform the checks may be while loading the sales order or may be perform checks separately and then release separately all 800 sales orders at one go. Can someone please advise?
Kind Regards,

Similar Messages

  • Two sales order generated, one during quotation release & other during RRB

    Hi All,
    I have configured some of CS functionalities.
    But the problem is:
    When I accept qtn in IW32, system creates a sales order.
    When I do RRB, against the same service order in DP90, the system creates one more sales order.
    During RRB in DP90, if I put first sales order that was created automatically during qtn acceptance, the system says that this sales order does not have DIP. (even if it is created automatically during qtn acceptance in IW32)
    Please let me know the right process.
    In my understanding, it is not correct to have two sales orders for one job.
    Also the system allows to create billing documents for both the sales orders. This is also a problem.


  • To release the sales order credit block by Customer Group

    1. I want to release the sales order credit block based on the Customer Group.
    Normally we release the credit block using the t.code VKM3.
    2. When i am maintaining the credit using the FD32, under the status screen of Credit control area Tab, the field "Credit Horizon Date", when i am creating the credit limit on 17/05/08, the system will take this field by default ie 16/07/08. I have maintained as 12 months in horizon ie OVA8.
    If any one could let me know, how the system is taking this date.
    Ravishankar M

    Hi Ravi
    Sap default horizon time is 2 month,thats why systym is taking  two months time,so if you want to change this as 12 month you can go to
    OMO1 and select S66 then change it as month you want.
    Reward if it helps you

  • Problem for releasing  blocked sales order on Creditlimit

    Hi Gurus,
            I a   hve a problem for releasing blocked sales orders
             what i have done: 1)i have blocked sales order based on exceeded creditlimit
             (i have change SDType in 'OVAK' is 'C')
                      2)now i have to release for furthur processing so i have done following steps
                      3)Goto VKM3/VKM1 T.Code and then release what order that is blocked.
                      4) order will appear in the list.
                      5)Select that one.
                      6)Click on the green flag that appears on the left hand side.
                      7)Click on save.
                      8)click on back it will ask for "Leave list".
                      9)Click on yes.
                      10)It said that Sales orer has been released
    Still what my problem is:
    Problem: 1)So i'm trying to create deliver for Sales order but it shows an error
             2)"Sales order is blocked for delivery: Credit limits" Even it was released    
    Plz kindly help  me what i do....
    Thanks In Advance

    sorry   i was  unfotunately put this thread here  over in SD

  • Transfer of sales orders from one plant to another

    Dear all,
    My requirement is as follows:
    I have created some 500 sales orders (open) in one sales org+plant.
    Now due to plant shifting to other area, I want to transfer all the above open sales orders to another sales org+plant.
    One option is to create them manually. But that is time consuming and prone to errors.
    Second option is to upload thru LSMW. That too is very tedious.
    Third option is to extend/assign new plant to the old sales area and change the plant in the orders. But I want in the new sales org + new plant.
    Is there any other option by which I can transfer the above sales orders from one plant to another?

    Hi SAPshed,
    The problem is not the change of plant, which is standard functionality, but the change of sales organization.
    An awful lot of information depends on the Sales Organization: Company code (!!), customers, materials, prices, profit center, etc.
    SAP does not even admit creating a sales order in a Sales Organization A with reference to a sales order with a sales organization B.
    IMHO your best option is to try to maintain the current Sales Orders with the current Sales Organization and change the Sales Order in VA02 (your third option).
    If you are absolutely sure that all materials and customers are created for the new Sales Area in the same way and that prices (discounts) are the same, you might want to do a direct update to VBAK table to change the Sales Organization (nasty!), but be prepared for the consequences (no SAP support in case of problems, you are on your own).
    Therefore if you insist on a different Sales Organization, then option 2) will be your best best.
    Best Regards,
    P.S. IMHO it is Best Practice to have a unique Sales Organization / Company Code.

  • Transfer sales orders from one compnay code to another

    Is it possible to transfer pending sales order from one company code to another? if yes please let me know complete procedure.

    You cannot transfer the sales order like this.If your company is getting closed then you can keep a deadline date before which you can close all the open orders and after that you can start creating the orders in the new company code.
    If your delivery date is beyond the deadline date then you can reject the sales orders and create them with new G/L accounts from the new company code.
    For this,you have to assign your sales organisation to the new company code.
    Reward points if it helps.

  • Sales orders from one salesorg. to another in same ssystem

    Hi Guys,
               I got a requirement like we need to convert or recreate sales orders from one sales organization to another sales organization in the same system without having any impact on the existing system.
    Any one have idea how to do it and is there any standard program to do this? is there any standard procedure for that>?
    Thanks in advance.
    Ram sri

    Hi Ramgopal,
    I never had this scenario, but the main step would be
    Define 2 logical systems: a sender and a receiver
    Assign one of them to the client
    Set up distribution model
    Generate partner profiles
    Set up converter (not filter!) /Application Link Enabling (ALE)-> Modelling and Implementing Business Processes-> Converting Data Between Sender and Receiver
    Here you can set up conversion rule for your sales org field.
    All of this step could be done in transaction SALE.

  • Deletion of multiple sale orders at one shot

    Hi Friends,
    Can anyone tell me how to delete multiple sale orders at one shot?
    Rama Rao

    Try doing it through LSMW, I used LSMW for deleting deliveries in mass and it worked

  • Display list of sales orders for one particular customer using BAPI in WD

    i want to display list of sales orders for one particular customer, the materials ordered, quantity ordered, goods issue date of that particular order and contact information about that particular customer, using Webdynpro.
    Please somebody send me related info,blogs,help links , to complete this task, this is very urgent.
    Please help

    Find the WD tutorials here...
    <a href="https://www.sdn.sap.comhttp://www.sdn.sap.comhttp://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webdynpro/web%20dynpro%20sample%20applications%20and%20tutorials.htm">Tutorials</a>

  • Release of Sale Orders

    Dear All,
    My requirement is that whenever any sales user create a sales order, then that sales order should go in Block so that any further processing can not be done.
    Only after the releasing of sales order by some higher authority, the order can be processed further.
    Please suggest solution.
    Kind Regards,

    My requirement is that whenever any sales user create a sales order, then that sales order should go in Block so that any further processing can not be done.
    further processing can not be done, you mean- delivery or further documents should not be created wrt: this Sales order , until unless its verified / released by the higher authority.
    if is it so, then you can achieve the same by using Status Profile. Tcode:BS02 & maintain ,
    what are all the documents can or can not be processed & what would be the initial status while creating sales order?
    By using  "Authorization Code" column, you can restrict who else can authorized to release/remove the block with the help of BASIS, as this Code has to be included in specific Userprofile to release.
    hope it helps

  • Can't combine Sales Orders into One Delivery

    A customer has started sending us 850's for their products.  Each 850 creates a new Sales Order from the ORDERS IDoc.
    We can not combine two different Sales Orders into one Delivery even if all the data is identical other than the Order Number itself.  The Error Message is VL067.
    The log reveals that the only data difference is the Address number.  Each time a new Sales Order is built SAP creates a new Address Number even though the customer is the same, and then it won't let you combine those two Sales Orders into one Delivery because the Adderss Number is different.
    We either need to make SAP stop creating a new Address for the same Customer, or we need to make SAP ignore the difference in Address Number when combining them into one Delivery.
    Any ideas?

    Hello Shiva,
    My apologies - I am too focused and forgot to say thank you for your tip.  I appreciate your time.
    I have discovered that the address check is only made if the value of ADRDA in VBPA is B or E, which both mean that the address was manually entered - actually, it came in via IDoc.
    Does anyone know how to control that value so it is not B or E?
    Thanks in advance.

  • API to pick release a sales order

    Hi All,
    I have a requirement of picke releasing a sales Order from back-end.
    I have the order in the booked status, In my pick release program I am calling the program to generated the batch id by calling the package WSH_PICKING_BATCHES_PKG.Insert_Row(), and then release the batch by calling
    WSH_PICK_LIST.release_batch(), but the order is not pick release.
    I found out that WSH_PICKING_BATCHES_PKG.Insert_Row(), generates a batch id but it is not inserting data into the table WSH_PICKING_BATCHES, I dont know why. Can anyone help in this regard as to where the problem might or what other API's if they exist can be used to pick release the order.
    Any method of pick releasing suggested will be highly appreciated.
    I am in 11.5.9 and we dont have the patch 3438823 applied in our system.

    we are using these 2 APIs, it works.

  • Combing multiple sales order into one delivery - help needed!

    basically, this is what im doing and maybe someone can direct me in the right direction?
    i goto vl10c, enter the shipping point and then goto the sales order tab and enter one sales order in sales document 1st field and then in the second field for sales document i enter the second sales order. it then opens up a list of the 2 sales order and i can check mark one or both sales order here. after i check mark both, im not sure what to do to combine the 2 sales order into one delivery document. anyone???

    I will suggest you to go through the link [http://help.sap.com/saphelp_erp60_sp/helpdata/en/38/c1853488601e33e10000009b38f83b/frameset.htm]
    I request you to search the SD forum before posting the issues. You will get plenty of treads on this subject.
    Check the required confiquration for "combing multiple sales order into one delivery" and if still problem persists then you post the error you are getting for resolution.
    Best Regards,
    Edited by: Bashir on Oct 16, 2009 8:58 AM
    Edited by: Bashir on Oct 16, 2009 8:58 AM

  • COPA - Multiple Sales Order with one wbs element.  COPA does not reference

    COPA - Multiple Sales Order with one wbs element.  COPA does not reference of reference of sales order.
    Hi All
    Currently we are in process of implementation of project related to Club Service for one of the client.
    Concept of this project is - there is "X" company engaged in supporting the different shared services for their client e.g. Client IBM - Shared Support Services of IBM is
    u2022     IDM
    u2022     Software Installation
    u2022     Help Desk
    u2022     Maintenance
    Co.. "X' is performing these services for IBM.    So for Co. "X" - IBM is one engagement. Like this way Co. X is performing such activities for many companies e.g. microsoft, HP, ABN AMRO etc.
    Objective - Get the consolidate report from COPA (Customer wise/services wise/sales order wise e.g. IBM/HelpDesk/10002/10).
    We propose a solution to create a project for each engagement and with WBS element. Each WBS element of different services e.g.
    Project IBM Inc.  100.100
    WBS Element    100.100.IDM 
    WBS Element    100.100.SoftIns
    WBS Element    100.100.HelpDesk
    WBS Element    100.100.Maintainance
    For this engagement (IBM), we are creating a sales order with line items (for services) and account assignment is WBS element.  In a sales order, there may be two lines for one services.   In a particular period, there are many such sales orders for this engagement... Milestone billing/period billing is used depending upon the services rendered.
    Now Cost Object will be WBS Element. So cost and revenue will posted to WBS and from this it goes to COPA.  In a month of May 2009 two - sales order is booked with three different line items with account assignment is WBS element.
    Sales Order Line Item No.....Item                  Account Assignment                      Revenue
    10000          100     IDM      100.100.IDM              1000
    10000          200     HELPDESK      100.100.HelpDesk              2000
    10000          100     Maintenance      100.100.Maintainance         3000
    Another Sales order booked with two different line items
    10000          100      IDM     100.100.IDM          3000
    10000          200      HELPDESK     100.100.HelpDesk          4000
    Cost will be booked directly against WBS element.
    In sales order level, there is no profitability segment, as cost object is WBS element.
    Billing, revenue will be posted directly to wbs element, from this revenue and cost of sales goes to COPA.
    Now in COPA,
    1.There is only one line for WBS element ex. 100.100.IDM with revenue 4000 (combing both the sales order)
    2.There is only one line for WBS element ex. 100.100.HelpDesk with revenue 6000 (combing both the sales order)
    3.There is only one line for WBS element ex. 100.100.Maintainance with revenue 4000
    In above case 1 & 2 we will not have reference of sales order and sales order line item in COPA table. There is only one line for this.  So we can not have reporting to sales order level.
    Is there any way by this the reference of sales order and sales order line will come in COPA for case 1 & 2.
    Please help in this issue.
    Abhay Dev
    Ph:- 91-22-67782229
    Cell:- 91-9819175185

    For these case (multiple materials with different characteristics); have you consider going to next level of WBS Elements. Meaning; lets say currently you are assigning WBS "Engineering (which is a level 2 WBS)" to all the items in SO. Instead under "Engineering" create 2 or 3 level 3 WBS Elements as E1, E2 etc and assign them 1:1 to your sales order line items. This would eliminate the exit as welll as complex development option. And also will let you get all the data in COPA and in turn you can pull to BW as well for reporting. Just a thought.

  • Unable to process intercompany sales order

    Unable to process intercompany Sales Order. The error message refers to the requirement to include inco-terms. although these terms are normally only included for imports. then why incoterm if intercompany sales with in same country?

    Hello Colleague,
    I regret to tell you that there is no standard way to change the       
    incoterm field as optional field. However, there is work around which  
    can be done by using SE51 -screen painter. To proceed further, please  
    refer to your local consultant as they might know your company system  
    requirement better.                                                    
    Ruy Castro

Maybe you are looking for

  • General Question Regarding Image Processing

    Hi All, I need a suggestion regarding image processing and this is the best place to get best advise. we need an image processing utility for our web processing. requirements are as described below: we have a e commerce based application where we nee

  • Help new itunes upgrade won't open even when ipod is plugged in

    Ok so evey time I click on the itunes icon in my start menu or plug in my ipod my computer makes that thinking noise they usually make when opening something and then nothing happens. I've also tried going into the itunes folder and clicking on files

  • How to generate two signals using NI myDAQ

    Dear Sir: I designed a circuit to generate a sine wave successfully using Labview. What I want is using NI myDAQ to generate another 3V DC signal as a power supply. I can do this seperately but when I add them together there is an error:  NI Platform

  • JMS(WebSphere-MQseries) async to sync bridge Problem

    Hi All, Please find the scenario. IDOC1  - > PI  - >JMS(WebSphere-MQseries)receiver request IDOC2 <--  PI  <-- JMS(WebSphere-MQseries)Sender response I need to pass the response to JMS sender so that I will get it and will send back to other IDOC. he

  • About the service cancellation.

       Hello guys! I've decided to get service for my old Iphone3GS which I already paid off everything, so no contract. I got the service again like 2 weeks ago. Is it possible to cancel my service without paying the bill that I owe.. or do I have to pa