Using led tv for display

I have been using a 32 inch lcd tv as a monitor with no problems. When I tried with an led tv same make same size I could not get the display size anywhere near as good and the colours were poor as well. Has anyone else had this problem.

Hi,
This may seem like an obvious question, but have you checked the native TV resolutions?
The 32" LCDTV may be a HD display (720 or sometimes 768 lines) and the LEDTV, being newer, may be a Full-HD (1080 line) resolution display.
If this is the case, you'll need to adjust the output in the Settings on the Mini
I use a Sony LEDTV and it looks fine.
Cheers!

Similar Messages

When did Apple start using LED backlights for display panels?

I am a relative newcomer to Apple world.
As an electronics professional, I am interested in display technology and progress.
Apple displays have been impressive for some years,particularly the MacBooks etc.
Does anyone know the historical points when LED's were replacing fluoro's?
Thanks folks.

Probably your best resource is the MacTracker dataase as it identifies the display technologies in different models. The LED was introduced at different times with different models. and MacTracker is subdivied by models--easy. Here's its entry for an older Intel iMac showing the TFT instead of LED display:
(click image to enlarge if needed)
Mactracker is freeware or donationware depending on your mindset and is here:
http://www.mactracker.ca/
For my research needs, it is much more convenient to have it as a free-standing app running under the Apple Discussions window than to use similar sites that require a lot of page navigation.

Using time delay for displaying tooltips

Hi guys, hope you are all fine,
I have a little problem, i need to use time delay for displaying a tooltip for a specific amount of time but i don't know what code to use.
Can you please give me a hand? I also try to find out the right way on how i can use tooltips when using a Jpanel and paintComponent. I amcurrently using setXORMode but this is not too efficient.
Thanks guys,
Regards,
John.

Ok guys, for any other who need this info, you get time delay by this:
try {
Thread.sleep(time);
} catch (Exception e) {}
// in "time" you put an integer value which represents milliseconds

Using the iMac for display only?

I bought an iMac in 2008. I use it for the majority of my computing needs, and for the most part is serves my purposes for everything. One thing I would like though is more gaming power.
I have a PC tower that is not connected to anything at the moment and needs a little hardware work which I will do myself.
Since the iMac is not user upgradable, and the video/graphics card is not upgradable at all, I was curious if I was able to connect the PC tower to the iMac's screen and use it as a display for a gaming computer and disconnect the tower for regular computing.
While I'm asking, is there any external way to improve the graphics card for gaming that anyone is aware of?

...Its too bad the graphics card is not upgradeable. I'm also going to try and find out if there is some sort of external way to increase performance....
This is the inherent issue with all "all-in-ones", both laptops and desktops, both PCs and Macs. For the most part, they are not upgradable. You can replace HD and RAM, but pretty much everything else "is what it is" and upgrades are "external only." Don't hold your breath that you'll find any way to increase performance (video or CPU.)
In the long run, you may want to consider just selling the iMac and get a new Mac. A Mini or Mac Pro, both of which do not have built-in monitors so would require you to get a monitor anyway, then you could KVM it with the PC. (I have my Mini KVMed with a Dell Poweredge server, which is sitting under my desk.) Alternatively, the new 27" iMac does allow for video input so it could be used as a monitor for the PC.

How to stop popup window using phone layout for display - Responsive HTML5, RH11

Hello,
I'm using the new Responsive HTML5 output in RH11. For some of my hyperlinks, I want to use a pop-up to display the linked topic. In the output, the pop-ups work, but they are automatically displayed using the phone layout, with the associated navigation buttons at the bottom, the help title, and so on. I don't want this - I just want a plain popup window. So, I tried to add a Screen Profile, set to 400 x 500 pixels exactly (thinking that this is bigger than a phone, but smaller than a tablet). I also added a corresponding Screen Layout. In the popup properties, I set the popup size to be 400 x 500 pixels. I guess there is something else I need to do to get this to work... but I don't know what that is. (I tried creating a new Window on the Project Set-up tab, and I tried creating a different master page. These things didn't work.)
Can anyone tell me if what I'm trying to do with these popups is just a bad idea and it won't work well with certain browsers?
Thanks!
Alexandra

I am confused as the responsive layouts are one size fits all, that is the point of them. You have one layout that morphs according to window size.
Screen Profiles are only used within Multiscreen HTML5 layouts where you can map screen profiles to different adaptive screen layouts, such as desktop, tablet and phone. That mapping does not apply to responsive layouts.
See www.grainge.org for RoboHelp and Authoring tips
@petergrainge

How to use boimage url for displaying images

I am trying to test the Image URL feature in a Web Intelligence report.
I have a few images loaded in the images folder on the installation server.
I made the text of a cell: boimage://auditingBOBJLogo.png
No images are showing up. When I am in view mode a box with an x shows.
I am using the Web Client to edit the report and view it in InfoView.
Any tips or best practices for getting this to work would be appreciated.
Thanks

Hi,
Make sure that you have placed the image files in correct folder.
And the cell formula is boimg://auditingBOBJLogo.png and not boimage://auditingBOBJLogo.png.
Remember to set the display property of the cell to Image URL.
Regards

Firefox will not use full screen for display

I asked this a while back and never got it resolved. I hope someone can help because I've been using Firefox for years but for the past couple months have had to use other browsers because FF is not working properly.
First of all- the display of any sites only takes up the middle os the screen. Even if I hit CTRL and scroll it enlarges the text but never expands to fill the whole screen as other browsers do. On my old computer I never had this problem but ever since I switched to my new one, with new flat panel monitor and Win7, I have been having this problem.
Also, I chose the Win7 theme of high-contrast black with pink. This has resulted in issues with many sites not displaying their chosen backgrounds and worse yet even sometimes buttons and other content on the pages is obliterated/hidden/invisible. Like you can still click on something if you can find it. The old version of Flock which is FF based also has this problem (as well as having all-white url and toolbar areas so you cannot read anything) while Google Chrome and new Flock do not- so it is definitely a problem with the coding here.
Please help, I would like to use Firefox again if I could also enjoy my new monitor and not just 1/3rd of the screen or less.

You can see that there is a VERY wide margin on either side- and this was already enlarged substantially with control/scroll which did not widen it at all (as it does on Google Chrome) only enlarged the miniscule text. I opened the exact same page in Chrome and widened it to fill the whole screen...

How to use Browser Control for displaying String Results..

Hi All,
I m new to java. I am developing desktop application for java getting problem at some stage , i hav some string Results which i got some how by searching in some text files. Now i want to show / format this string in Browser control.
Please help me in this...
Thanks in Advance
Nicky

i m sonu could u piz tell me how to read integer from keyboard

Using TV for display!

What type of cable will connect my macbbok pro to an HDMI port on my TV? Where can i get one? I would like to watch Netflix on my TV!

Model Name:
MacBook Pro
Model Identifier:
MacBookPro5,4
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.53 GHz
Number Of Processors:
1
Total Number Of Cores:
2
L2 Cache:
3 MB
Memory:
4 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP53.00AC.B03
SMC Version (system):
1.49f2
Serial Number (system):
W80053JV7XJ
Hardware UUID:
9A00FCA9-2A6B-5AC5-8484-83CEBBEEE3F4
Sudden Motion Sensor:
State:
Enabled
not sure how to tell which video out port i have. i did purchase my MBP in 2010 though, so is there another way to carry audio? can i use 1 cable for display and another for audio?

Tooltip for h:selectOneMenu which uses f:selectItems to display data

I want to display a tooltip when a user mouseovers over every element in a dropdown.
I'm using h:selectOneMenu for displaying the dropdown
<h:selectOneMenu tabindex="4" id="dataList" valueChangeListener="#{DataBean.processDataSelection}" value="#{DataBean.dataSelected}" >
          <a4j:support event="onchange" reRender="dataPanel" ajaxSingle="true"/>
          <f:selectItems value="#{DataBean.dataList}" />
</h:selectOneMenu>
Can anyone give any solution?

There is no way with the Sun JSF Mojarra. Either implement your own Javascript solution (crawl the DOM and apply title the attribute on the options), or rise a featurerequest at the issuetracker of the Mojarra [development team|http://javaserverfaces.dev.java.net] that they should add the 'title' attribute to the f:selectItem tag and the javax.faces.model.SelectItem class.

Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

Hi I'm looking for a thunderbolt extension cable so I can hook up my 27" LED THURDERBOLT APPLE DISPLAY SCREEN.

Extension cables for Thunderbolt don't yet exist, but Apple has recently released a Thunderbolt cable that is 2M or 6.5 feet long. I just connected my 27" Thunderbolt display to my iMac, which sit about 4-feet apart from each other, and it works perfectly. You just don't use the Thunderbolt connection cable that is attached to the display - plug the display's power cable in, and use the 6.5-foot Thunderbolt cable to connect the display to the computer.

LED-alternative for 24-inch cinema display?

With my month-old Mac Pro 8-core, I cannot use a 24-inch LED Cinema Display, because the Mac does not have a mini display port. No matter how much I would like to buy the LED-display, I'm not willing to invest an extra 315,- euro's to get a new (noisier) graphics card with mini display port to replace my GeForce 8800GT. Does anyone know a good LED-replacement for the 24-inch Apple display? It has to be an IPS-type panel, not TN.

Hello, Ertjie.
The link titled Download the 24-inch LED Cinema Display Update from the kb/TS4045 article worked for me when I tried it today. Click the "Download" link I post here or try the one in the kb article again. Perhaps it will work for you now?
However, I note that the kb article expressly states that this firmware update:
...is only intended for use with and will only install on the Apple 24-inch LED Cinema Display while the display is connected to a Thunderbolt-enabled Mac. (EZ Jim emphasis added)
If your Mac is really using Mac OS X (10.6.8) as shown in your initial topic posting, your Mac may not be Thunderbolt-enabled. If so, contact Apple or your Apple-Authorized Service Provider for help.
Message was edited by: EZ Jim
Mac OSX 10.8.3

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

How can connect my macbook pro mid 2012 to my imac 21.5 inch mid 2010 ?? I want to use imac like a display for macbook.

Target Display Mode: Frequently Asked Questions (FAQ)
with a mini display to mini display cable. Attach it to the Thunderbolt port on your MBP and to the mini display port on your iMac.
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.

How 2 creat report for displaying the details of a Delivery Document using

how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewarded

HI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY                                *
report zdelivery message-id z9bhu          .
types: begin of t_likp,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
       end of t_likp.
types: begin of t_lips,
           vbeln type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
        end of t_lips.
types: begin of t_vbpa,
           vbeln type vbpa-vbeln,      "SD DocumenT Number
           posnr type vbpa-posnr,      "Item number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_vbpa.
types: begin of t_kna1,
           kunnr type kna1-kunnr,      "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr type kna1-adrnr,      "Address
       end of t_kna1.
types: begin of t_li_vbpa,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
*           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
*           WAERK TYPE LIKP-WAERK,      "Currency
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
*           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,      "Customer Number 1
       end of t_li_vbpa.
types: begin of t_final,
           vbeln type likp-vbeln,      "Delivery
           erdat type likp-erdat,      "Date for rec creation
           kunnr type likp-kunnr,      "Ship-To Party
           kunag type likp-kunag,      "Sold-to party
           traty type likp-traty,      "Means-of-Transport
           vbeln1 type lips-vbeln,      "Delivery
           posnr type lips-posnr,      "Delivery item
           matnr type lips-matnr,      "Material Number
           arktx type lips-arktx,      "Short Text for Sales Order Item
           lfimg type lips-lfimg,      "Actual quantity delivered
           netpr type lips-netpr,      "Net Price
           vgbel type lips-vgbel,      "Doc no of the reference document
           vbeln3 type vbpa-vbeln,     "SD DocumenT Number
           parvw type vbpa-parvw,      "Partner function
           kunnrb type vbpa-kunnr,     "Customer Number 1
           name1 type kna1-name1,      "Name 1
           ort01 type kna1-ort01,      "City
           adrnr1 type kna1-adrnr,     "Address
           name2 type kna1-name1,      "Name 1
           ort02 type kna1-ort01,      "City
           adrnr2 type kna1-adrnr,     "Address
           name3 type kna1-name1,      "Name 1
           ort03 type kna1-ort01,      "City
           adrnr3 type kna1-adrnr,     "Address
       end of t_final.
*            D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
*           S E L E C T I O N S C R E E N   D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
selection-screen end of block block2.
*            A T S E L E C T I O N - S C R E E N   E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
*            S T A R T   O F S E L E C T I O N     E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
*   APPLICATION                       = 'TX'
*   ARCHIVE_INDEX                     =
*   ARCHIVE_PARAMS                    =
    device                            = 'PRINTER'
*   DIALOG                            = 'X'
*   FORM                              = ' '
   language                          = sy-langu
*   OPTIONS                           =
*   MAIL_SENDER                       =
*   MAIL_RECIPIENT                    =
*   MAIL_APPL_OBJECT                  =
*   RAW_DATA_INTERFACE                = '*'
*   SPONUMIV                          =
* IMPORTING
*   LANGUAGE                          =
*   NEW_ARCHIVE_PARAMS                =
*   RESULT                            =
exceptions
   canceled                          = 1
   device                            = 2
   form                              = 3
   options                           = 4
   unclosed                          = 5
   mail_options                      = 6
   archive_error                     = 7
   invalid_fax_number                = 8
   more_params_needed_in_batch       = 9
   spool_error                       = 10
   codepage                          = 11
   others                            = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
*   ARCHIVE_INDEX          =
   form                   = 'Z9BT_DELIVERY'
   language               = sy-langu
*   STARTPAGE              = ' '
*   PROGRAM                = ' '
*   MAIL_APPL_OBJECT       =
* IMPORTING
*   LANGUAGE               =
exceptions
   form                   = 1
   format                 = 2
   unended                = 3
   unopened               = 4
   unused                 = 5
   spool_error            = 6
   codepage               = 7
   others                 = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
   element                        = 'ITEM_LIST'
   function                       = 'SET'
   type                           = 'BODY'
   window                         = 'MAIN'
* IMPORTING
*   PENDING_LINES                  =
* EXCEPTIONS
*   ELEMENT                        = 1
*   FUNCTION                       = 2
*   TYPE                           = 3
*   UNOPENED                       = 4
*   UNSTARTED                      = 5
*   WINDOW                         = 6
*   BAD_PAGEFORMAT_FOR_PRINT       = 7
*   SPOOL_ERROR                    = 8
*   CODEPAGE                       = 9
*   OTHERS                         = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
*   RESULT                         =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   spool_error                    = 3
   codepage                       = 4
   others                         = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
*   RESULT                         =
*   RDI_RESULT                     =
* TABLES
*   OTFDATA                        =
exceptions
   unopened                       = 1
   bad_pageformat_for_print       = 2
   send_error                     = 3
   spool_error                    = 4
   codepage                       = 5
   others                         = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
*         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*&      Form VALIDATE_DATA
*       text
* --> p1        text
* <-- p2        text
form validate_data .
select single vbeln into wa_likp-vbeln
                    from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform.                    " VALIDATE_DATA
*&      Form FETCH_DATA
*       text
* --> p1        text
* <-- p2        text
form fetch_data .
select a~vbeln
       a~erdat
       a~kunnr
       a~kunag
       a~traty
       b~vbeln
       b~posnr
       b~matnr
       b~arktx
       b~lfimg
       b~netpr
       b~vgbel
       c~vbeln
       c~parvw
       c~kunnr
         into table it_li_vbpa
                from likp as a
                left outer join lips as b on a~vbeln = b~vbeln
                inner join vbpa as c on b~vgbel = c~vbeln
                where a~vbeln in s_vbeln and
                c~parvw = 'RE'.
endform.                    " FETCH_DATA
*&      Form MERGE_DATA_KNA1
*       text
* --> p1        text
* <-- p2        text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
        name1
        ort01
        adrnr into table it_kna1 from kna1
                    for all entries in it_li_vbpa_temp
                    where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform.

Can I stream a movie from my Macbook to my Apple TV on one display, and still use my Macbook for other things?

I have a Macbook Pro and an Apple TV. What I'd like to do is stream a movie from my CinemaNow Account to my television by using my Apple TV and my Macbook. I know that I can do this my using the mirroring feature, however then I can no longer use my Macbook for anything else because my TV will only display what is on the screen of my Macbook. Now with this is mind, what then is the point of having multiple displays through the use of my Apple TV, if only one display can be used at a time unless they both show the same image? Or is there a way for me to be able to stream the movie to my TV and still use my Macbook for other purposes (multi-tasking)?

To enable a second display over AirPlay, you first need to be connected to the same network as your Apple TV. Next, open System Preferences > Displays, and select your Apple TV from the “AirPlay Display” drop-down menu.
Once you do this, your display may flash as the second display connection is acquired, and the Apple TV takes over as the second display. If the displays are mirrored, then you can correct this by opening the “Arrangement” tab in System Preferences > Displays, and ensuring that the “Mirror Displays” checkbox is unchecked.
In this same “Arrangement” tab, you can move the displays around in the pane to ensure that they're positioned correctly, relative to your physical space (usually side-by-side, or top-down). The primary display here is denoted here by the Menu bar on the display. The arrangement helps with being able to drag windows from one display to the next: if your secondary display is arranged to be to the right of your primary one, for example, you can drag things to it through the right side of your primarcy screen.

Using led tv for display

Similar Messages

Maybe you are looking for