Va01 Calling program sapmv45b instead of sapmv45a

Hi All,
I am working on upgrade project from 45b to ecc6. In comparision to 45b system while debugging va01 is calling program sapmv45B instead of sapmv45a.
I have checked the table t185v is filled with program sapmv45b in ecc6.
In 4.5B it is sapmv45a.
I have program which needs to call customer screen.
call anyone tell me where i can control this flow.
se93 is fine.
Thanks alot in advance
Ritika

Hi Bijay,
yes it is "call transaction J4AB". But my question is that do we need to create recording for that.Just giving "call transaction J4AB" is enough??if so, what do we give in perform generate bdc_data.
If we have to create recording, do we need to ask client for the data. please let me know.
Thanks,
Hema.

Similar Messages

Send XML to Client: call-program cannot pass ampersand in parameter

In WLI Studio, I have tried to use the action "Send XML to Client" with
following information:
<call-program mode="async" name="IEXPLORE.EXE">
<actionid>1027425345078</actionid>
<parm>http://pttserver:7001/pttWebApp/Test.jsp?First=a&Second=b&Third=c</par
m>
</call-program>
The problem is that the ampersand (&) of call-program parameter will always
shift three character right on any program (e.g., IE, Notepad, etc.).
From the above example, IE can be called correctly, but its parameter -- a
string
"http://pttserver:7001/pttWebApp/Test.jsp?First=a&Second=b&Third=c", will be
passed as
"http://pttserver:7001/pttWebApp/Test.jsp?First=aSec&ond=bThi&rd=c".
I have also tried to use the string "&" instead of an ampersand, and the
parameter was passed as
"http://pttserver:7001/pttWebApp/Test.jsp?First=aamp&;Second=bamp&;Third=c".
What should be used in order to pass the ampersand character correctly?
If it is a bug, can any one suggest the workaround?
Thankyou in advance,
Suwanee Suwanapong

If you think you're encountering URL length issues make sure you are using POST and not GET, although it looks like there may be additional issues: http://www.javaworld.com/community/node/2307

On an iphone 4s, when I tap the phone number in my contacts list instead of calling the number it goes to a "Welcome to mail screen" how do I make it call the number instead?

On an iphone 4s, when I tap the phone number in my contacts list instead of calling the number it goes to a "Welcome to mail" screen with icloud, Microsoft exchange, Gmail, Yahoo, Aol & Windows Live Hotmail listed beneath. How do I make it call the number instead?

Never heard of that. I suspect it thinks that's an email address and you're seeing that screen b/c you don't have an email account setup on your iPhone.
Assuming the number is valid, try a reset by pressing the home and sleep buttons until you see the Apple logo, ignoring the slider. Takes about 5-15 secs of button holding and you won't lose any data or settings.

How to get data from the called program using SUBMIT in a background job?

Hi Experts,
I've a program which creates a background job using JOB_OPEN and JOB_CLOSE function modules.
Between the above function modules I need to call a program using SUBMIT VIA JOB statement.
My problem is, How do I fetch some data in an internal table in the called program to the calling program after the SUBMIT statement?
I tried to EXPORT and IMPORT the data, but they are giving a failed sy-subrc when using this background job.
Kindly let me know your inputs and valuable suggestions.

Kumar,
When we execute a program as a background job then the output will be sent to Spool which needs to be fetched again.I guess we need to use Submit via spool as mentioned by Rajat.
Check these threads to get some idea
submit report to spool & import spool id
Re: Generate Spool for a report
K.Kiran.

Submit report in background and get result into calling program

Hi,
I want to call the standard SAP program from Zprogram to create invoice using Submit. here the code
SUBMIT RV60SBT1 TO SAP-SPOOL
                    SPOOL PARAMETERS print_parameters
                    WITHOUT SPOOL DYNPRO
                    VIA JOB name NUMBER number
                    WITH VKOR1 eq TVKO-VKORG
                    with X_VBELN eq gv_vbeln_so
                    with ALLEA eq 'X'
                    with ALLEL eq ''
                    AND RETURN.
the standard SAP program creates invoice (billing document number). I want to get the billing document number which created using the above statement into the calling program. ......could anyone pls tell me how to do this? ie how to read the billing document number in the calling program.
Regrds
shan
Edited by: Shankar Raju Devadoss on Mar 21, 2011 9:00 AM

Hi Shankar,
You can try it in both ways.
1.   By using the parameter ID VF. (GET PARAMETE ID)
2.   Select the invoice numbers from the table VBRK for the current date (SY-DATUM) and
       sort it by time and get the latest invoice.
Regards
Hareesh Menon

HT2534 I want to use an iTunes gift card as the back up for in app purchases for a so called free app instead of my credit card or having my bank account emptied.

I want to use an iTunes gift card as the back up for in app purchases for a so called free app instead of my credit card or having my bank account emptied.
How can I do this? I saw something about gift cards can only be used for music or movies, not apps.

You can use an iTunes gift card for app, music, movies and other media.To redeem one see:
iTunes Store: How to redeem a code

Call program screen in ABAP Report

I have a execute program which match to a transaction, in the program, which will generate a selection screen and do selection. After that, the program will call another program screen to do somethings, i want to know can i call program's screen in my execute report, thanks

Hi
To Call the Transaction :
CALL TRANSACTION '<TCODE>' AND SKIP FIRST SCREEN.
To call a Report :
SUBMIT <REPORT> USING SELECTION-SCREEN <NO>.
<b>Reward if Helpful</b>

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name.

Brand new 5s- sometimes phone numbers display when receiving calls and texts instead of contact name. Hard to know who is calling/texting! A few times I've tapped on the text message icon and I can actually watch as the conversations turn from showing just numbers to the contact names. Same thing when looking at call history and voice mail- sometimes it shows numbers and then I'll go back and the contacts will be back. So frustrating!

boomer1630 wrote:
- i have a Samsung S3)
-I have tried using *228 to update.
You don't dial *228 to update the Preferred Roaming List on 4G phones; I"m surprised the call went through. The PRL updates are handled by the SIM card.
Try this and see if it helps: turn off the phone, remove the SIM card, and wait a few minutes. Then re-insert the SIM card, turn the phone back on, and give the phone a few minutes to re-establish a network connection.

Changing data in called program

Hi Gurus,
I have an exit where I want to change the main program's internal table data dynamically in this exit FM.
In short, I want to change the internal table data in calling program being in called FM.
Can this be done? If so how?
Regds

You can change the data in a field in a program using field-symbols. The field-symbols acts as a pointer to a defined field. Change the field-symbol value will in turn change the value of the field. You can also assign the value of a field from a different program ( at runtime ) to a field symbol. But I beleive that in this circumstance changing the field-symbol will not change the actual field value.
I had this same problem myself.

To find the Calling Program of an sap script

Hi All,
Can any body please let me know how to find the calling program ( main program ) of an SAP Script Form.
Thanks and Regards,
Rupesh

Hi,
if it's possible to create the form online (no background job), this works:
From SE71 (Form painter), use menu Utilities-->activate debugger.
Then start the program creating the SAPscript form.
As soon as form processing starts, you are inside the SAPscript debugger. At this point, enter /h in command line to activate ABAP debugger. Continue to get into abap debugging. In ABAP debugger, use button 'calls' to see the call stack. The program at the bottom is the starting point, this or one of the more upwards program triggers the form.
Hope this helps.
regards,
C.

Search help - Need to read dynpro of the calling program

Hello all,
We have a requirement where we need to read the dynpro of the calling program of a search help.
Say I have a screen (selection screen, module pool or ALV grid etc) where I have a field PARTNER with whom a custom search help is attached. But on this same screen there is another field RLTYP. What we want is that when an F4 is taken on PARTNER, the value of RLTYP should also be passed as value to the Search help exit.
In short, we need to read the screen fields of the calling screen of a search help.
Any ideas are appreciated.
Regards
Priyanka

Check the sample code:
FUNCTION F4IF_SHLP_EXIT_OFFRCONT.
""Local interface:
*" TABLES
*"      SHLP_TAB TYPE SHLP_DESCT
*"      RECORD_TAB STRUCTURE SEAHLPRES
*" CHANGING
*"     VALUE(SHLP) TYPE SHLP_DESCR
*"     VALUE(CALLCONTROL) LIKE DDSHF4CTRL STRUCTURE DDSHF4CTRL
DATA : ws_flag(1) TYPE c,
         ws_rec(1) TYPE c.
DATA : i_dynpfields TYPE dynpread OCCURS 0 WITH HEADER LINE.
DATA : ws_data TYPE ddshiface,
         i_data TYPE ddshifaces.
ws_flag = 'X'.
ws_rec = 'X'.
IF ws_flag = 'X'.
    i_dynpfields-fieldname = 'P_CUST'.
    APPEND i_dynpfields.
    CALL FUNCTION 'DYNP_VALUES_READ'
      EXPORTING
        dyname               = sy-cprog
        dynumb               = '1000'
      TABLES
        dynpfields           = i_dynpfields
      EXCEPTIONS
        invalid_abapworkarea = 1
        invalid_dynprofield = 2
        invalid_dynproname   = 3
        invalid_dynpronummer = 4
        invalid_request      = 5
        no_fielddescription = 6
        invalid_parameter    = 7
        undefind_error       = 8
        double_conversion    = 9
        stepl_not_found      = 10
        OTHERS               = 11.
    READ TABLE i_dynpfields WITH KEY fieldname = 'P_CUST'.
    ws_data-shlpfield = 'ZCUSTOMER'.
    ws_data-valfield = 'G_SIMFIELDS-FIELDNAME'.
    ws_data-value = i_dynpfields-fieldvalue.
    APPEND ws_data TO i_data.
    ws_data-shlpfield = 'ZOFFRCONT'.
    ws_data-valfield = 'P_CONT'.
    ws_data-f4field =     'X'.
    APPEND ws_data TO i_data.
    LOOP AT shlp_tab.
      IF ws_rec = 'X'.
        shlp_tab-interface[] = i_data[].
        APPEND shlp_tab.
        ws_rec = ' '.
      ENDIF.
    ENDLOOP.
    DELETE shlp_tab INDEX 1.
    ws_flag = ' '.
ENDIF.
ENDFUNCTION.
Regards,
Prakash.

Calling the selection screen of the calling program after the execution of

Hi all,
I had created a program for a purchase order display.
It has three radio-buttons from where i am calling different programs.
I am using submit in the calling program and get parameter in at selection-screen output of the called program.
I am getting the end report without the display of the selection screen of called program. But when i am clicking back on the end-report then i want to come back on the selection screen of the calling program. But i am coming out of the execution.
Can anyone please tell me how to call the selection screen.
Thanks in advance,
Regards
vamsi

Hi, when you do the SUMBIT statement, make sure that you are using the extension........ AND RETURN.
Submit <report> <b>AND RETURN</b>.
This should return control to the caller.
Regards,
Rich Heilman

Updating a table used in a calling program

I am creating an internal version of the notification report program and would like to use a table created in the called program in the main program.
I generate the data in the called program and would like to "pass" the data into a holding table in the calling program.
For instance called program loads table i_hold_text, I would like to pass this to calling program ZRIPRSN00 table GT_HOLD_TEXT to use in the SAPScript. Ideas?

You could use field-symbols.
like
DATA: l_text(18) VALUE '(SOURCE_PROGRAM_NAME)table_name[]'.
field-symbols <fs> type table.
Assign (ltext) to <fs>.
if sy-subrc eq 0.
"Do what you want with <fs>
endif.

Passing the dynamic internal tables to the calling program

Hello,
From my user exit USEREXIT_MOVE_FIELD_TO_VBAP in program MV45AFZZ I am calling a routine to build dynamically an internal table. I get A DUMP in the perform statement. Please see below.
*FORM USEREXIT_MOVE_FIELD_TO_VBAP.*
*Global declarations
RANGES: KSCHL      FOR A605-KSCHL,
               KUNNR     FOR A605-KUNNR,
               MATNR     FOR A605-MATNR.
field-symbols: <dyn_table> type standard table,
                     <dyn_wa>,
                     <dyn_field>.
*Internal tables and work areas
data: dy_table type ref to data,
        dy_line type ref to data,
        xfc type lvc_s_fcat,
        ifc type lvc_t_fcat.
KSCHL-sign   = 'I'.
KSCHL-option = 'EQ'.
KSCHL-low    = 'ZB00'.
APPEND KSCHL.
if not vbap-matnr is initial.
    MATNR-sign   = 'I'.
    MATNR-option = 'EQ'.
    MATNR-low    = vbap-matnr.
    APPEND MATNR.
endif.
if not vbak-kunnr is initial.
    KUNNR-sign   = 'I'.
    KUNNR-option = 'EQ'.
    KUNNR-low    = vbak-kunnr.
    APPEND KUNNR.
endif.
perform get_data(ZSD_CARRIER_SELECTION)
                           TABLES KAPPL
                                         KSCHL
                                         KUNNR
                                         MATNR
                          CHANGING <dyn_table>.
*ENDFORM.*
*Then in program ZSD_CARRIER_SELECTION*
*Global declarations
RANGES: KSCHL      FOR A605-KSCHL,
               KUNNR     FOR A605-KUNNR,
               MATNR     FOR A605-MATNR.
field-symbols: <dyn_table> type standard table,
                     <dyn_wa>,
                     <dyn_field>.
*Internal tables and work areas
data: dy_table type ref to data,
        dy_line type ref to data,
        xfc type lvc_s_fcat,
        ifc type lvc_t_fcat.
*FORM get_data CHANGING dyn_table.*
select single * into w_t685
from t685 where KSCHL eq P_KSCHL
              and KOZGF ne space.
select * into table i_T682I
from T682I where KVEWE = w_t685-KVEWE
               and KAPPL = w_t685-KAPPL
               and KOZGF = w_t685-KOZGF.
loop at i_T682I into W_T682I.
    CONCATENATE 'A' W_T682I-KOTABNR INTO w_dd02l-TABNAME.
    itables-TABNAME = w_dd02l-TABNAME.
    collect itables.
endloop.
loop at itables.
    perform get_structure tables ifc
                          using itables-TABNAME.
endloop.
loop at ifc into xfc where key = 'X'.
    clear i_fields.
    i_fields-FIELDNAME = xfc-fieldname.
    i_fields-sign      = 'I'.
    i_fields-option    = 'EQ'.
    if xfc-fieldname = 'KSCHL'.
      i_fields-low = 'ZB00'.
    endif.
    append i_fields.
endloop.
call method cl_alv_table_create=>create_dynamic_table
    EXPORTING
      it_fieldcatalog = ifc
    IMPORTING
      ep_table        = dy_table.
assign dy_table->* to <dyn_table>.
create data dy_line like line of <dyn_table>.
assign dy_line->* to <dyn_wa>.
*ENDFORM.*
*FORM get_structure tables ifc type LVC_T_FCAT*
                   *using TABNAME.*
data : idetails type abap_compdescr_tab,
         xdetails type abap_compdescr.
data : ref_table_des type ref to cl_abap_structdescr.
* Get the structure of the table.
ref_table_des ?=
      cl_abap_typedescr=>describe_by_name( TABNAME ).
idetails[] = ref_table_des->components[].
select * into table i_dd03l
from dd03l where tabname = tabname.
sort i_dd03l by fieldname.
loop at idetails into xdetails.
    clear xfc.
    xfc-fieldname = xdetails-name .
    xfc-datatype = xdetails-type_kind.
    xfc-inttype   = xdetails-type_kind.
    xfc-intlen    = xdetails-length.
    xfc-decimals = xdetails-decimals.
    read table i_dd03l with key fieldname = xfc-fieldname
                                KEYFLAG   = 'X'.
    if sy-subrc = 0.
      xfc-key   = 'X'.
    endif.
    collect xfc into ifc.
endloop.
*ENFORM.                    "get_structure*
Thanks in advance.
Please use code tags in the future when pasting code.
Edited by: Rob Burbank on Mar 2, 2009 4:29 PM

Hi,
In the calling program whereyou are calling the subroutine...
perform get_data(ZSD_CARRIER_SELECTION)
                           TABLES KAPPL
                                         KSCHL
                                         KUNNR
                                         MATNR
                          CHANGING <dyn_table>.
you have made use of field symbol <dyn_table> which you have not assigned.... due to which you are getting a dump....
so before the call you have to assign this field symbol and then use it in the call...
just assing to some dummy type and then you pass it using changing...
later on in the called program you can unassign the field-symbol as soon as you enter in the subroutine.
data itab type standard table of scarr.
assign itab to <dyn_table>.
perform get_data(ZSD_CARRIER_SELECTION)
                           TABLES KAPPL
                                         KSCHL
                                         KUNNR
                                         MATNR
                          CHANGING <dyn_table>.
even if this does not solve your problem try debugging and check at which line it is going for a dump... so that it gives a clear idea where exactly is the fault
Regards,
Siddarth

Syntax errors in WLST are not reported to calling program

Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
Martin

Hello Martin,
This is a known problem with wlst-jython. One cannot catch syntax errors
programmatically. The only way is to avoid loading properties file
that may cause syntax errors.
I am curious though how can a user enter invalid properties via a script?
thanks,
-satya
Martin Gustavsson wrote:
Hi,
When there are syntax errors in WLST-script, the calling program will get no information about this.
In our case the calling program is ANT. If the user enters invalid properties it could cause syntax errors in the WLST script. But the ANT task always receive a successfull code back and doesn't know that it went wrong.
What is the workaround for this? How can I from WLST return a fail code so that ANT does not continue?
Regards,
Martin

Va01 Calling program sapmv45b instead of sapmv45a

Similar Messages

Maybe you are looking for