Variant Load in ALV GRID
Hi ,
I am using CL_GUI_ALV_GRID and at runtime we are maintaining variants for this grid , so initially variant is loading properly,
but for one function we are setting some what different fieldcatalog by using SET_FRONTEND_FIELDCATALOG after this method execution variant is not working properly.
i want variant to be loaded after this method also. is there any way to do it.
Thanks and Regards,
shiva.
If you are trying to modify how the column heading in the ALV grid looks(color, or any other attribute), it simply can not be done, not in the ALV Grid.
Regards,
Rich Heilman
Similar Messages
-
Problem with same layout (variant) for two ALV Grid and ALV Tree
Hello!
I have two docking containers on the screen. On the left i have cl_gui_alv_tree, on the right cl_salv_table.
When a user set a default layout for ALV Grid (or ALV Tree), raport starts and sets this layout in both objects (tree and grid).
How to avoid this?Hi,
Take Two radio buttons.
First radion button display the two containers in grid format,
second radio button display the two containers in tree format base on user selection.
CREATE OBJECT G_DOCING_CONTAINER
EXPORTING PARENT = G_CUSTOM_CONTAINER."G_CONTAINER.
DISPLAY THE DATA IN GRID FORMATA
CREATE OBJECT r_grid
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
DISPLAY THE GRID DATA IN SECOND CONTAINER
CREATE OBJECT r_grid1
EXPORTING
i_parent = G_DOCING_CONTAINER
CALL METHOD g_docing_container->set_width
EXPORTING
width = 1300.
OTHERWISE WE CAN DISPLAY THE TWO CONTAINERS DATA IN A GRID FORMAT
CREATE OBJECT g_tree
EXPORTING
parent = g_docing_container"g_custom_container
IF R1 = 'X'. "FOR GRID DISPLAY
CALL METHOD r_grid1->set_table_for_first_display
CALL METHOD r_grid2->set_table_for_first_display
ELSE.
************TREE DISPLAY
ENDIF.
regards,
muralii -
Could anyone suggest how to display varying number of alv grids based on the selection criteria (eg if 1 then a single alv must be displayed, if 2 then two alvs and so on)
Rakesh,
The grids would be placed one after the other in the screen. Build a screen with a custom container that spans the entire width of the screen. Then under that one, place another, etc. However, you must pick a finite number of custom containers.
If you can not, then I would suggest that you re-visit the user requirement. Sounds like the user needs to create multiple reports... creating a "super" report is a bit far fetched.
Reward points accordingly. -
How to set variant for ALV grid from ABAP
Hello,
I have a program which displays some data with ALV grid. Then after some operation I would like to set different layout for the grid, but not by choosing it manually but by the program. I thought that it would be enough to use the method SET_VARIANT, so I'm setting DISVARIANT structure properly, using SET_VARIANT method and after that I'm calling REFRESH_TABLE_DISPLAY but layout is not changed. What else should I do? Is that possible?
Best regards,
MarcinHi,
Check this
* While declaring select-options
parameters: p_vari like ltdx-variant. " Layout
* then add the following code in
at selection-screen on value-request for p_vari.
perform f_variant_f4 using p_vari.
* Code for f_variant_f4
form f_variant_f4 using p_vari.
* private variables
data : v_exit type c.
clear gs_variantt.
v_variant_save = 'U'.
call function 'LVC_VARIANT_F4'
exporting
is_variant = gs_variant
i_save = v_variant_save
importing
e_exit = v_exit
es_variant = gs_variantt
exceptions
not_found = 1
program_error = 2
others = 3.
if sy-subrc ne c_0.
message i999(yscc) with text-064. " No Layout Available for F4
endif.
if v_exit is initial.
gs_variant-variant = gs_variantt-variant.
p_vari = gs_variantt-variant.
endif.
endform. " F_variant_f4
* In PBO
call method grid1->set_table_for_first_display
exporting
is_layout = gs_layout
is_variant = gs_variant
i_save = 'A'
it_toolbar_excluding = i_exclude[]
changing
it_outtab = i_output[]
it_fieldcatalog = i_fieldcat[]
exceptions
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
others = 4.
a® -
Hi folks,
Im using the variant function of the ALV Grid. The screen you get by creating or saving a variant contains the following tabstrips: Sort Order, Filter, View and Display. My aim is to hide all tabstrips except the Sort Order one. Is there any way to do this?
thanks in advanceCheck this code that I got from Rich Heilman when I had the same problem. If you find out which you have by using
RS_CUA_GET_STATUS_FUNCTIONS and then exclude the ones you don't want.
Sure...check out the following code.
Its the IT_TOOLBAR_EXCLUDING parameter of the interface of method SET_TABLE_FOR_FIRST_DISPLAY.
look a the form EXCLUDE_TB_FUNCTIONS.
REPORT ZRICH_0001.
TABLES: MARA.
DATA: BEGIN OF I_ALV OCCURS 0,
MATNR TYPE MARA-MATNR,
MAKTX TYPE MAKT-MAKTX,
END OF I_ALV.
DATA: ALV_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
DATA: ALV_GRID TYPE REF TO CL_GUI_ALV_GRID.
DATA: LAYOUT TYPE LVC_S_LAYO.
DATA: FIELDCAT TYPE LVC_T_FCAT.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001 .
SELECT-OPTIONS: S_MATNR FOR MARA-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
START-OF-SELECTION.
PERFORM GET_DATA.
CALL SCREEN 100.
Module status_0100 OUTPUT
MODULE STATUS_0100 OUTPUT.
SET PF-STATUS '0100'.
SET TITLEBAR '0100'.
DATA: LT_EXCLUDE TYPE UI_FUNCTIONS.
DATA: VARIANT TYPE DISVARIANT.
VARIANT-REPORT = SY-REPID.
VARIANT-USERNAME = SY-UNAME.
Create Controls
CREATE OBJECT ALV_CONTAINER
EXPORTING
CONTAINER_NAME = 'ALV_CONTAINER'.
CREATE OBJECT ALV_GRID
EXPORTING
I_PARENT = ALV_CONTAINER.
ALV Specific. Data selection.
Populate Field Catalog
PERFORM GET_FIELDCATALOG.
Exclude functions
PERFORM EXCLUDE_TB_FUNCTIONS CHANGING LT_EXCLUDE.
CALL METHOD ALV_GRID->SET_TABLE_FOR_FIRST_DISPLAY
EXPORTING
IS_LAYOUT = LAYOUT
IS_VARIANT = VARIANT
I_SAVE = 'U'
I_STRUCTURE_NAME = 'I_ALV'
it_toolbar_excluding = lt_exclude
CHANGING
IT_OUTTAB = I_ALV[]
IT_FIELDCATALOG = FIELDCAT[].
ENDMODULE.
Module USER_COMMAND_0100 INPUT
MODULE USER_COMMAND_0100 INPUT.
CASE SY-UCOMM.
WHEN 'BACK' OR 'CANC'.
IF NOT ALV_CONTAINER IS INITIAL.
CALL METHOD ALV_CONTAINER->FREE.
CLEAR: ALV_CONTAINER.
FREE : ALV_CONTAINER.
ENDIF.
IF SY-SUBRC = 0.
SET SCREEN 0.
LEAVE SCREEN.
ELSE.
LEAVE PROGRAM.
ENDIF.
WHEN 'EXIT'.
IF NOT ALV_CONTAINER IS INITIAL.
CALL METHOD ALV_CONTAINER->FREE.
CLEAR: ALV_CONTAINER.
FREE : ALV_CONTAINER.
ENDIF.
LEAVE PROGRAM.
ENDCASE.
ENDMODULE.
FORM GET_DATA
FORM GET_DATA.
SELECT * INTO CORRESPONDING FIELDS OF TABLE I_ALV
FROM MARA
INNER JOIN MAKT
ON MARAMATNR = MAKTMATNR
WHERE MARA~MATNR IN S_MATNR
AND MAKT~SPRAS = SY-LANGU.
SORT I_ALV ASCENDING BY MATNR.
ENDFORM.
Form Get_Fieldcatalog - Set Up Columns/Headers
FORM GET_FIELDCATALOG.
DATA: LS_FCAT TYPE LVC_S_FCAT.
REFRESH: FIELDCAT.
CLEAR: LS_FCAT.
LS_FCAT-REPTEXT = 'Material Number'.
LS_FCAT-COLTEXT = 'Material Number'.
LS_FCAT-FIELDNAME = 'MATNR'.
LS_FCAT-REF_TABLE = 'I_ALV'.
LS_FCAT-OUTPUTLEN = '18'.
LS_FCAT-COL_POS = 1.
APPEND LS_FCAT TO FIELDCAT.
CLEAR: LS_FCAT.
LS_FCAT-REPTEXT = 'Material Description'.
LS_FCAT-COLTEXT = 'Material Description'.
LS_FCAT-FIELDNAME = 'MAKTX'.
LS_FCAT-REF_TABLE = 'I_ALV'.
LS_FCAT-OUTPUTLEN = '40'.
LS_FCAT-COL_POS = 2.
APPEND LS_FCAT TO FIELDCAT.
ENDFORM.
Form EXCLUDE_TB_FUNCTIONS
FORM EXCLUDE_TB_FUNCTIONS CHANGING PT_EXCLUDE TYPE UI_FUNCTIONS.
DATA LS_EXCLUDE TYPE UI_FUNC.
Row manipulation
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_COPY_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_DELETE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_APPEND_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_INSERT_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_LOC_MOVE_ROW.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
Sort buttons
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_SORT_ASC.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
LS_EXCLUDE = CL_GUI_ALV_GRID=>MC_FC_SORT_DSC.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
This excludes all buttons
LS_EXCLUDE = '&EXCLALLFC'.
APPEND LS_EXCLUDE TO PT_EXCLUDE.
ENDFORM.
Best Regards Benita -
Multiple ALV Grid Controls per report - problem with default displ.variant
Hi,
I have a report with few screens called sequentialy. Each one of the screens has implemented own instance of ALV Grid Control within custom container, means:
- screen 100 has container Cont100 and grid control "grid100",
- screen 110 has container Cont110 and grid control "grid110"
- screen 120 has container Cont120 and grid control "grid120"
and so on...
Each one of the grid controls is initialized with own field catalog table, with own layout and variant structure definitions. My problem occurs when the user changes the display variant for some of the grid controls and save the layout variant using "default setting" checkbox. In this case next time the program is started all other grid controls behaves like they don't have their own variant definitions, but uses the default setting of the mentioned screen. This leads (usualy) to unsuable grid controls by default, because usualy different controls have no equal field-definition tables. I have the same behaviour even when there are more than 1 ALV grids on a single screen (for example - 2).
For now I don't provide variant variables at selection screen, but it seems there is no way to provide such variables for each one of the grid-controls.
Is anyone aware how to control this? Means no matter if there is default setting in use for some of the grid-controls, how to manipulate other grid-controls not to use this default setting?
Many thanks in advance.
Regards,
Ivaylo Mutafchievcheck this sample code which displays 4 grids in 4 different tabs and with 4 different handles
PROGRAM sapmzsdpp MESSAGE-ID z1.
Table Declarations *
TABLES:
vbpa, " Sales Document: Partner
kna1, " Customer Master
vbap. " Sales Document: Item Data
Tab Strip Declarations *
CONTROLS:
tabstrip_sdpp TYPE TABSTRIP. " Tabstrip
Constants declarations *
CONSTANTS:
c_rep_zm(2) TYPE c VALUE 'ZM', " Outside Sales Representative
c_rep_ve(2) TYPE c VALUE 'VE', " Inside Sales Representative
c_rep_zi(2) TYPE c VALUE 'ZI', " Sales Manager
c_abgru_08(2) TYPE c VALUE '08', " Reason for Rej: SO Not Closed
c_stock_ind_e TYPE c VALUE 'E', " Stock Idctr : Orders on hand
c_gauge(5) TYPE c VALUE 'GAUGE', " Characteristic Name - GAUGE
c_width(5) TYPE c VALUE 'WIDTH', " Characteristic Name - WIDTH
c_gauge_metric(12) " Character Name - GAUGE_METRIC
TYPE c VALUE 'GAUGE_METRIC',
c_width_metric(12) " Character Name - WIDTH_METRIC
TYPE c VALUE 'WIDTH_METRIC',
c_eng_metric(14) " Charac Value - ENGLISH_METRIC
TYPE c VALUE 'ENGLISH_METRIC',
c_coil(4) TYPE c VALUE 'COIL', " For Value COIL
c_spec_bf(7) TYPE c VALUE 'SPEC_BF'," Charac value SPEC_BF
c_wadat_ist(8) " Actual Goods Movement Date
TYPE c VALUE '00000000',
c_mcha(4) TYPE c VALUE 'MCHA', " Database Table 'MCHA'
c_classtype_022(3)
TYPE c VALUE '022', " Class Type : BATCH
c_pipe(2) TYPE c VALUE '06', " Material Pricing Group: Pipes
c_item_ctgry_ztam(4)
TYPE c VALUE 'ZTAM', " Item Cat:Certificate Mnfctr
c_lab_result(10) " Charac Value LAB_RESULT
TYPE n VALUE '0000001392',
c_none_reqd(10) " For Value NONE REQD
TYPE c VALUE 'NONE REQD.',
c_passed(6) TYPE c VALUE 'PASSED', " For Value PASSED
c_pending(12) TYPE c " For Value TEST PENDING
VALUE 'TEST PENDING',
c_bundling(13) " For Value TEST BUNDLING
TYPE c VALUE 'TEST BUNDLING',
c_normal(2) TYPE c VALUE '01'. " Priority: Normal
Internal Table Declarations *
DATA :
Internal table to hold common data for all reports
BEGIN OF t_common_data OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
vbeln LIKE vbap-vbeln, " Sales Document Number
posnr LIKE vbap-posnr, " Sales Document Item Number
ihrez_e LIKE vbkd-ihrez_e, " Mill Order Number
matnr LIKE vbap-matnr, " Material Number
pstyv LIKE vbap-pstyv, " Sales Document Item Category
kwmeng LIKE vbap-kwmeng, " Cumulative Order Quantity
lprio LIKE vbap-lprio, " Delivery Priority
werks LIKE vbap-werks, " Plant
kondm LIKE vbap-kondm, " Material Pricing Group
aedat LIKE vbap-aedat, " Date of Last Change
cuobj LIKE vbap-cuobj, " Configuration
saldata LIKE vbap-zzcust_req_avail,
" Required Availability Date
END OF t_common_data,
Internal table to hold Customer Number
BEGIN OF t_cust_temp OCCURS 0,
kunnr LIKE vbak-kunnr, " Customer Number
END OF t_cust_temp,
Internal table to hold stock details
BEGIN OF t_stock OCCURS 0,
vbeln LIKE mska-vbeln, " Sales Document Number
posnr LIKE mska-posnr, " Sales Document Item Number
matnr LIKE mska-matnr, " Material Number
werks LIKE mska-werks, " Plant
charg LIKE mska-charg, " Batch Number
kalab LIKE mska-kalab, " Valuated Stock
ersda LIKE mska-ersda,
END OF t_stock,
Internal table to hold deliveries
BEGIN OF t_delivery_data OCCURS 0,
vbeln LIKE lips-vbeln, " Delivery Document Number
vgbel LIKE lips-vgbel, " Document No of Ref Document
vgpos LIKE lips-vgpos, " Item No of Ref Item
END OF t_delivery_data,
Internal table to hold released tons & released days
BEGIN OF t_released_tons_days OCCURS 0,
vbeln LIKE likp-vbeln, " Delivery Document Number
btgew LIKE likp-btgew, " Total Weight
bldat LIKE likp-bldat, " Document Date in Document
END OF t_released_tons_days,
Internal table to hold Pre-Production-Pending Orders (Report-1)
BEGIN OF t_pre_prod_ord OCCURS 0,
sortl1 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e1 LIKE vbkd-ihrez_e, " Mill Order Number
salord1(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
days_entry LIKE zlgcyinfo-days_since_entry,
" Days Since Entry
dept LIKE zlgcyinfo-bklog, " Department
notes1 LIKE zcsimemo-text, " CSI File Memo Text
*/ Request No. DV2K904687
chng_date LIKE vbap-aedat, " Date of Last Change
END OF t_pre_prod_ord,
Internal table to hold Delinquent Orders (Report-2)
BEGIN OF t_delinquent_ord OCCURS 0,
sortl2 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e2 LIKE vbkd-ihrez_e, " Mill Order Number
salord2(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
schdate LIKE vbep-edatu, " Schedule Line Date
days_late LIKE zlgcyinfo-dayslate,
" Days Late
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
days_at_unit LIKE zlgcyinfo-daysatunit,
notes2 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_delinquent_ord,
Internal table to hold Processed Material Orders (Report-3)
BEGIN OF t_processed_ord OCCURS 0,
sortl3 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e3 LIKE vbkd-ihrez_e, " Mill Order Number
salord3(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
order_tons LIKE vbap-kwmeng, " Cumulative Order Quantity
fin_tons LIKE mska-kalab, " Val.Stock With Unres Usage
fin_days TYPE i, " Finished Days
rel_tons LIKE likp-btgew, " Total Weight
rel_days TYPE i, " No.of.Days Order is Released
status(15) TYPE c, " Status Of Stock
tb_tons LIKE zlgcyinfo-tons, " Tons
notes3 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_processed_ord,
Internal table to hold Flagged Orders (Report-4)
BEGIN OF t_flagged_ord OCCURS 0,
sortl4 LIKE zcustcode-sortl, " Customer Search Term
ihrez_e4 LIKE vbkd-ihrez_e, " Mill Order Number
salord4(17) TYPE c, " Sales Order Document & Item
descri TYPE char70, " Specification of the Item
speci TYPE char30, " Description of the Item
saldata LIKE vbap-zzcust_req_avail,
unit LIKE zlgcyinfo-unit, " Status of Consolidation Units
tons LIKE zlgcyinfo-tons, " Tons
priority LIKE vbap-lprio, " Delivery Priority
notes4 LIKE zcsimemo-text, " CSI File Memo Text
END OF t_flagged_ord,
Internal table to hold CSI memo file data
BEGIN OF t_csi_memo_data OCCURS 0,
vbeln LIKE zcsimemo-vbeln, " Sales Document Number
posnr LIKE zcsimemo-posnr, " Sales Order line item
text LIKE zcsimemo-text, " CSI File Memo Text
END OF t_csi_memo_data,
Internal table to hold Customer Codes
BEGIN OF t_customer_code OCCURS 0,
sortl LIKE zcustcode-sortl, " Sort Field
kunnr LIKE zcustcode-kunnr, " Customer Number
END OF t_customer_code,
Internal table to hold schedule line dates
BEGIN OF t_schedule_line_date OCCURS 0,
vbeln LIKE vbep-vbeln, " Sales Document Number
posnr LIKE vbep-posnr, " Sales Document Item Number
edatu LIKE vbep-edatu, " Schedule line date
END OF t_schedule_line_date,
Internal table to hold Characteristic values
t_configuration
TYPE TABLE OF conf_out
WITH HEADER LINE,
Internal tables to hold legacy data
t_lgcyinfo TYPE TABLE OF zlgcyinfo
WITH HEADER LINE.
Work variables declarations *
DATA:
gv_parvw LIKE kupav-parvw, " Partner function
gv_abgru LIKE vbap-abgru, " Reason to eject sales order
gv_gauge LIKE conf_out-atwtb, " Charac Value Description
gv_width LIKE conf_out-atwtb, " Charac Value Description
gv_ok_code LIKE sy-ucomm, " Usercommand
gv_okcode LIKE sy-ucomm, " User Command
gv_number LIKE sy-dynnr
VALUE '0101', " Initial Sub Screen Number
gv_vbeln LIKE vbak-vbeln, " Sales Order
gv_posnr LIKE vbup-posnr, " Sales Item
*/ Request No. DV2K904687
gv_del_prio LIKE vbap-lprio, " Delivery Priority
gv_obj_key LIKE inob-objek, " Object Key
gv_config LIKE inob-cuobj, " Configuration
gv_lab_result LIKE ausp-atwrt, " Lab Result Value
gv_pass_stock LIKE mska-kalab, " Finished Stock
gv_fail_stock LIKE mska-kalab, " Failed Stock
gv_tp_tons LIKE mska-kalab, " Test Pending Tons
gv_csi_stock LIKE mbew-lbkum, " CSI Stock On Hand
gv_val_stock LIKE mska-kalab, " Valuated Stock
gv_fin_tons LIKE mska-kalab, " Finished Tons
gv_fin_days TYPE i, " Finished Days
gv_rel_tons LIKE likp-btgew, " Released Tons
gv_rel_days TYPE i, " Released Days
gv_no_delivery " Number of Delivery Documents
TYPE i,
gv_bund_tons LIKE zlgcyinfo-tons, " Bundling Tons
gv_net_weight LIKE mara-ntgew, " Net Weight
gv_tb_tons LIKE zlgcyinfo-tons, " Test/Bundling Tons
gv_date LIKE mska-ersda, " Date
gv_tabix LIKE sy-tabix, " Table Index
gv_flg TYPE c, " Flag Variable
gv_exit TYPE c. " For Parameter Exit
Constant declarations for ALV Grid *
CONSTANTS:
c_cont_pre_prod_ord
TYPE scrfname VALUE 'CUST_PPP',
" Custom Container for Report-1
c_cont_delinquent_ord
TYPE scrfname VALUE 'CUST_DIP',
" Custom Container for Report-2
c_cont_processed_ord
TYPE scrfname VALUE 'CUST_PMS',
" Custom Container for Report-3
c_cont_flagged_ord
TYPE scrfname VALUE 'CUST_FLGORD',
" Custom Container for Report-4
c_handle1(3) TYPE c VALUE 'G_1', " Handle for PPP rpt Grid
c_handle2(3) TYPE c VALUE 'G_2', " Handle for DIP rpt Grid
c_handle3(3) TYPE c VALUE 'G_3', " Handle for PMS rpt Grid
c_handle4(3) TYPE c VALUE 'G_4', " Handle for FLGORD rpt Grid
c_true TYPE c VALUE 'X', " For value 'X'
c_save TYPE c VALUE 'A'. " User-Defd & Global Variants
Selection Screen *
SELECTION-SCREEN BEGIN OF SCREEN 500 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-014.
PARAMETERS :
p_osr RADIOBUTTON GROUP g1
DEFAULT 'X', " Outside Sales Representative
p_isr RADIOBUTTON GROUP g1, " Inside Sales Representative
p_s_mgr RADIOBUTTON GROUP g1. " Sales Manager
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-005.
SELECT-OPTIONS:
s_pernr FOR vbpa-pernr
OBLIGATORY, " Employee Number
s_kunnr FOR kna1-kunnr, " Customer Number
s_sortl FOR kna1-sortl, " Customer Search Term
s_kondm FOR vbap-kondm. " Material Pricing Group
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-006.
PARAMETERS:
p_open RADIOBUTTON GROUP g2
DEFAULT 'X', " Open Orders
p_closed RADIOBUTTON GROUP g2. " Closed Orders
SELECTION-SCREEN END OF BLOCK b3.
SELECTION-SCREEN BEGIN OF BLOCK b4 WITH FRAME TITLE text-007.
PARAMETERS:
p_var1 LIKE disvariant-variant, " Variant For Report-1
p_var2 LIKE disvariant-variant, " Variant For Report-2
p_var3 LIKE disvariant-variant, " Variant For Report-3
p_var4 LIKE disvariant-variant. " Varinat For Report-3
SELECTION-SCREEN END OF BLOCK b4.
SELECTION-SCREEN END OF SCREEN 500.
*/ Begin of Modification - Request No. DV2K904687
Selection Screen for Changing Sales Order Priority
SELECTION-SCREEN BEGIN OF SCREEN 1100 AS WINDOW.
SELECTION-SCREEN BEGIN OF BLOCK b5 WITH FRAME TITLE text-044.
PARAMETERS p_sonum LIKE vbap-vbeln." Sales Order Number
SELECT-OPTIONS s_item FOR vbap-posnr." Sales Order Item
PARAMETERS p_delpr LIKE vbap-lprio." Delivery Priority
SELECTION-SCREEN END OF BLOCK b5.
SELECTION-SCREEN END OF SCREEN 1100.
*/ End of Modification - Request No. DV2K904687
CLASS lcl_gv_event_receiveriver DEFINITION *
CLASS lcl_event_receiver DEFINITION DEFERRED.
ALV Grid - Work Variables Declarations *
DATA:
gv_cont_pre_prod_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-1
gv_cont_delinquent_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-2
gv_cont_processed_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-3
gv_cont_flagged_ord TYPE REF
TO cl_gui_custom_container,
" Custom Cont For Report-4
gv_grid_pre_prod_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-1
gv_grid_delinquent_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-2
gv_grid_processed_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-3
gv_grid_flagged_ord TYPE REF
TO cl_gui_alv_grid,
" Grid For Report-4
gv_event_receiver TYPE REF
TO lcl_event_receiver,
" Object For Local Class
gs_lay_pre_prod_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_delinquent_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_processed_ord TYPE lvc_s_layo,
" Work Area for Grid layout
gs_lay_flagged_ord TYPE lvc_s_layo,
" Work Area for Grid Layout
gs_var_pre_prod_ord TYPE disvariant,
" Layout Structure
gs_var_delinquent_ord TYPE disvariant,
" Layout Structure
gs_var_processed_ord TYPE disvariant,
" Layout Structure
gs_var_flagged_ord TYPE disvariant,
" Layout Structure
t_fcat_pre_prod_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-1
t_fcat_delinquent_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-2
t_fcat_processed_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-3
t_fcat_flagged_ord TYPE lvc_t_fcat
WITH HEADER LINE,
" Field Catalog For Report-4
t_exclude TYPE ui_functions,
" Function Code Table
gs_exclude TYPE ui_func. " Function Code Structure
CLASS lcl_gv_event_receiver DEFINITION *
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_hotspot
FOR EVENT hotspot_click OF cl_gui_alv_grid
IMPORTING e_row_id e_column_id es_row_no,
handle_top_of_page
FOR EVENT print_top_of_page OF cl_gui_alv_grid,
*/ Begin of Modification - Request No. DV2K904687
handle_toolbar
FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING e_object e_interactive,
handle_user_command
FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER DEFINITION
CLASS IMPLEMENTATION *
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_hotspot.
CASE e_column_id-fieldname.
WHEN 'SALORD1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_pre_prod_ord-salord1.
WHEN 'SALORD2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_delinquent_ord-salord2.
WHEN 'SALORD3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_processed_ord-salord3.
WHEN 'SALORD4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call VA03 To View Sales Order Line Item Details
PERFORM call_va03 USING t_flagged_ord-salord4.
WHEN 'SORTL1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_pre_prod_ord-sortl1.
WHEN 'SORTL2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_delinquent_ord-sortl2.
WHEN 'SORTL3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_processed_ord-sortl3.
WHEN 'SORTL4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Customer Search Term
PERFORM call_zsd11_cust_code USING t_flagged_ord-sortl4.
WHEN 'IHREZ_E1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_pre_prod_ord-ihrez_e1.
WHEN 'IHREZ_E2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_delinquent_ord-ihrez_e2.
WHEN 'IHREZ_E3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_processed_ord-ihrez_e3.
WHEN 'IHREZ_E4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call ZSD11 for Mill Order
PERFORM call_zsd11_millorder USING t_flagged_ord-ihrez_e4.
WHEN 'NOTES1'.
CLEAR t_pre_prod_ord.
READ TABLE t_pre_prod_ord
INTO t_pre_prod_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_pre_prod_ord-salord1.
WHEN 'NOTES2'.
CLEAR t_delinquent_ord.
READ TABLE t_delinquent_ord
INTO t_delinquent_ord
INDEX e_row_id-index.
Call zsd00087 program to edit CSI Memo Text
PERFORM edit_notes USING t_delinquent_ord-salord2.
WHEN 'NOTES3'.
CLEAR t_processed_ord.
READ TABLE t_processed_ord
INTO t_processed_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_processed_ord-salord3.
WHEN 'NOTES4'.
CLEAR t_flagged_ord.
READ TABLE t_flagged_ord
INTO t_flagged_ord
INDEX e_row_id-index.
Call zsd00087 program to CSI Memo Text
PERFORM edit_notes USING t_flagged_ord-salord4.
ENDCASE. " CASE E_COLUMN_ID ...
ENDMETHOD. " HANDLE_HOTSPOT
METHOD handle_top_of_page.
PERFORM write_report_header.
ENDMETHOD. " METHOD HANDLE_TOP_OF_PAGE
*/ Begin of Modification - Request No. DV2K904687
METHOD handle_toolbar.
DATA: ls_toolbar TYPE stb_button.
append a separator to normal toolbar
CLEAR ls_toolbar.
MOVE 3 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
CLEAR ls_toolbar.
append a button for Change Delivery Priority
MOVE 'CHNG_PRIO' TO ls_toolbar-function.
MOVE 'Change SO Delivery Priority'(048)
TO ls_toolbar-quickinfo.
MOVE 'Change SO Priority'(049) TO ls_toolbar-text.
MOVE 0 TO ls_toolbar-butn_type.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD. " handle_toolbar
METHOD handle_user_command.
DATA: t_sel_row TYPE lvc_t_roid,
gs_sel_row TYPE lvc_s_roid,
gs_flagged_ord LIKE t_flagged_ord,
lv_lines TYPE i.
CASE e_ucomm.
WHEN 'CHNG_PRIO'.
REFRESH t_sel_row.
CLEAR e_ucomm.
CALL METHOD gv_grid_flagged_ord->get_selected_rows
IMPORTING
et_row_no = t_sel_row.
CLEAR: t_flagged_ord,
gv_vbeln,
gv_posnr,
gv_del_prio.
DESCRIBE TABLE t_sel_row LINES lv_lines.
IF lv_lines GT 1.
MESSAGE i001 WITH 'Select only one row'(043).
ELSEIF lv_lines EQ 1.
READ TABLE t_sel_row INTO gs_sel_row INDEX 1.
READ TABLE t_flagged_ord INTO gs_flagged_ord
INDEX gs_sel_row-row_id.
IF sy-subrc EQ 0.
SPLIT gs_flagged_ord-salord4 AT '-' INTO gv_vbeln gv_posnr.
gv_del_prio = gs_flagged_ord-priority.
CLEAR: s_item, s_item[].
p_sonum = gv_vbeln.
p_delpr = gv_del_prio.
s_item-low = gv_posnr.
APPEND s_item TO s_item.
CLEAR s_item.
ENDIF. " IF sy-subrc EQ 0
ENDIF. " IF lv_lines GT 1
IF lv_lines LE 1.
CALL SELECTION-SCREEN '1100' STARTING AT 30 2
ENDING AT 110 7.
LEAVE TO SCREEN 100.
ENDIF.
ENDCASE. " CASE e_ucomm
ENDMETHOD. " handle_user_command
*/ End of Modification - Request No. DV2K904687
ENDCLASS. " LCL_EVENT_RECEIVER
" IMPLEMENTATION
Form WRITE_REPORT_HEADER *
This subroutine displays Report Header which includes *
Report Name, Executed by, Execution date, Execution Time *
There are no parameters to be passed to this subroutine *
FORM write_report_header.
DATA lv_rep_tit(72) TYPE c.
FORMAT COLOR COL_KEY.
MOVE sy-title TO lv_rep_tit.
CONDENSE lv_rep_tit.
SKIP 1.
WRITE: /3 sy-repid,
25 'California Steel Industries, Inc.'(040),
75 'Page'(041),
80(4) sy-pagno.
WRITE: /3 sy-uzeit,
25 lv_rep_tit,
75 sy-datum.
FORMAT RESET.
ENDFORM. " WRITE_REPORT_HEADER
At selection-output *
AT SELECTION-SCREEN OUTPUT.
CLEAR sy-ucomm.
IF sy-dynnr EQ '0500'.
Initialize layout variant for report-1
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM initialize_layoutvariant CHANGING gs_var_pre_prod_ord.
p_var1 = gs_var_pre_prod_ord-variant.
Initialize layout variant for report-2
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM initialize_layoutvariant CHANGING gs_var_delinquent_ord.
p_var2 = gs_var_delinquent_ord-variant.
Initialize layout variant for report-3
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM initialize_layoutvariant CHANGING gs_var_processed_ord.
p_var3 = gs_var_processed_ord-variant.
Initialize layout variant for report-4
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM initialize_layoutvariant CHANGING gs_var_flagged_ord.
p_var4 = gs_var_flagged_ord-variant.
*/ Begin of Modification - Request No. DV2K904687
ELSEIF sy-dynnr EQ '1100'.
DATA t_exclude TYPE TABLE OF sy-ucomm.
SET PF-STATUS 'MENU_1100'.
To use your own GUI status for a selection screen
CALL FUNCTION 'RS_SET_SELSCREEN_STATUS'
EXPORTING
p_status = 'MENU_1100'
TABLES
p_exclude = t_exclude.
ENDIF. " IF sy-dynnr EQ '0500'
*/ End of Modification - Request No. DV2K904687
At Selection Screen *
AT SELECTION-SCREEN.
*/ Begin of Modification - Request No. DV2K904687
CASE sy-dynnr.
WHEN '1100'.
IF sy-ucomm IS INITIAL.
CLEAR sy-ucomm.
LEAVE TO SCREEN 1100.
ENDIF. " IF sy-ucomm IS INITIAL
CASE sy-ucomm.
WHEN 'SAVE'.
CLEAR sy-ucomm.
Change Delivery Priority using BAPI method
PERFORM change_del_priority.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
WHEN 'CANCEL'.
CLEAR: sy-ucomm,
gv_vbeln,
gv_posnr,
gv_del_prio,
p_sonum,
s_item,
s_item[],
p_delpr.
LEAVE TO SCREEN 0.
ENDCASE. " CASE sy-ucomm
WHEN '0500'.
IF sy-ucomm EQ 'CRET'.
LEAVE TO SCREEN 100.
ELSEIF sy-ucomm IS INITIAL.
LEAVE TO SCREEN 500.
ENDIF. " IF SY-UCOMM EQ 'CRET'
ENDCASE. " CASE sy-dynnr
*/ End of Modification - Request No. DV2K904687
Selection Screen: Validations *
AT SELECTION-SCREEN ON s_pernr.
Validate Employee Number
PERFORM validate_employee_number.
AT SELECTION-SCREEN ON s_kunnr.
Validate Customer Number
IF NOT s_kunnr IS INITIAL.
PERFORM validate_customer_number.
ENDIF. " IF NOT S_KUNNR IS INITIAL
AT SELECTION-SCREEN ON s_sortl.
Validate Search Term
IF NOT s_sortl IS INITIAL.
PERFORM validate_search_term.
ENDIF. " IF NOT S_SORTL IS INITIAL
AT SELECTION-SCREEN ON s_kondm.
Validate Product
IF NOT s_kondm IS INITIAL.
PERFORM validate_product.
ENDIF. " IF NOT S_KONDM IS INITIAL
Validate p_var1
AT SELECTION-SCREEN ON p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
gs_var_pre_prod_ord-variant = p_var1.
IF p_var1 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_pre_prod_ord.
ENDIF. " IF P_VAR1 IS NOT INITIAL
Validate p_var2
AT SELECTION-SCREEN ON p_var2.
CLEAR gs_var_delinquent_ord.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
gs_var_delinquent_ord-variant = p_var2.
IF p_var2 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_delinquent_ord.
ENDIF. " IF P_VAR2 IS NOT INITIAL
Validate p_var3
AT SELECTION-SCREEN ON p_var3.
CLEAR gs_var_processed_ord.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
gs_var_processed_ord-variant = p_var3.
IF p_var3 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_processed_ord.
ENDIF. " IF P_VAR3 IS NOT INITIAL
Validate p_var4
AT SELECTION-SCREEN ON p_var4.
CLEAR gs_var_flagged_ord.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
gs_var_flagged_ord-variant = p_var4.
IF p_var4 IS NOT INITIAL.
PERFORM validate_variant CHANGING gs_var_flagged_ord.
ENDIF. " IF P_VAR4 IS NOT INITIAL
Selection Screen: Value Request for ALV GRID Variants *
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var1.
CLEAR gs_var_pre_prod_ord.
gs_var_pre_prod_ord-report = sy-cprog.
gs_var_pre_prod_ord-handle = c_handle1.
PERFORM f4_variant CHANGING gs_var_pre_prod_ord
gv_exit.
IF gv_exit NE c_true.
p_var1 = gs_var_pre_prod_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var2
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var2.
CLEAR:
gs_var_delinquent_ord,
gv_exit.
gs_var_delinquent_ord-report = sy-cprog.
gs_var_delinquent_ord-handle = c_handle2.
PERFORM f4_variant CHANGING gs_var_delinquent_ord
gv_exit.
IF gv_exit NE c_true.
p_var2 = gs_var_delinquent_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var3
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var3.
CLEAR:
gs_var_processed_ord,
gv_exit.
gs_var_processed_ord-report = sy-cprog.
gs_var_processed_ord-handle = c_handle3.
PERFORM f4_variant CHANGING gs_var_processed_ord
gv_exit.
IF gv_exit NE c_true.
p_var3 = gs_var_processed_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
F4 help for variant p_var4
AT SELECTION-SCREEN ON VALUE-REQUEST FOR p_var4.
CLEAR:
gs_var_flagged_ord,
gv_exit.
gs_var_flagged_ord-report = sy-cprog.
gs_var_flagged_ord-handle = c_handle4.
PERFORM f4_variant CHANGING gs_var_flagged_ord
gv_exit.
IF gv_exit NE c_true.
p_var4 = gs_var_flagged_ord-variant.
ENDIF. " IF GV_EXIT NE c_true
Form validate_employee_number *
This subroutine validates Employee Number *
There are no parameters to need be passed to this subroutine *
FORM validate_employee_number.
DATA lv_pernr LIKE vbpa-pernr.
SELECT SINGLE pernr
INTO lv_pernr
FROM vbpa
WHERE pernr IN s_pernr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-010.
ENDIF. " IF SY-SUBRC NE 0
CLEAR lv_pernr.
ENDFORM. " VALIDATE_EMPLOYEE_NUMBER
Form validate_customer_number *
This subroutine validates Customer Number *
There are no parameters need to be passed to this subroutine *
FORM validate_customer_number.
SELECT SINGLE kunnr
INTO t_common_data-kunnr
FROM kna1
WHERE kunnr IN s_kunnr.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-011.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_common_data-kunnr.
ENDFORM. " VALIDATE_CUSTOMER_NUMBER
Form validate_search_term *
This subroutine validates Search Term *
There are no parameters need to be passed to this subroutine *
FORM validate_search_term.
SELECT SINGLE sortl
INTO t_customer_code-sortl
FROM kna1
WHERE sortl IN s_sortl.
IF sy-subrc NE 0.
MESSAGE e001 WITH text-012.
ENDIF. " IF SY-SUBRC NE 0
CLEAR t_customer_code-sortl.
ENDFORM. " VALIDATE_SEARCH_TERM
Form validate_product *
This subroutine validates Product *
There are no parameters need to be passed to this subroutine *
FORM validate_product.
SELECT SINGLE kondm
INTO t_ -
Hi all,
I am displaying 4grids on a TAB Strip in ALV
i have created one variant for each grid(report)
But when i run the prog and press on F4 help for variant parameter, i am getting variants of all the grids
Is there any way to get only those variants related to a particular grid.
thanks in advanceHi,
Specify different variant handles for each of the four grids. Some thing like the following,
<b>ls_variant-report = <your program name>.</b>
****Set following handler different for each grid ****reference
****something like 'GRD1', 'GRD2' and so on..
<b>ls_variant-handle = <your grid handle 4 characters>.</b>
CALL METHOD ref_grid->set_table_for_first_display
EXPORTING
I_BYPASSING_BUFFER =
I_BUFFER_ACTIVE =
I_CONSISTENCY_CHECK =
I_STRUCTURE_NAME =
<b> is_variant = ls_variant</b>
i_save = 'A'
I_DEFAULT = 'X'
is_layout = ls_layout
IS_PRINT =
IT_SPECIAL_GROUPS =
it_toolbar_excluding =
IT_HYPERLINK =
IT_ALV_GRAPHICS =
IT_EXCEPT_QINFO =
CHANGING
it_outtab = lt_data
it_fieldcatalog = lt_fcat
IT_SORT =
IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
Hope this helps..
Sri
Message was edited by: Srikanth Pinnamaneni -
ALV Grid Dialog Program Variant Problem
Hi Gurus-
Please help!!! I got the following problem-
The ALV dialog screen will have fields with display options as well as a number of fields as input options (editable). Based on user inputs in the input fields and other displayed fields, the user selects "Process"/F8 and it calls the BAPI_MATERIAL_EDIT functions to update material.
The problem is, I want to use variants in the input fields (Maybe REUSE_ALV_VARIANT_F4) when I select a variant it loops through the selected rows and fills out the input fields with the values stored in the variant. I want to use sample ALV grid program such as BCALV*.
The question is, can I use variants in ALV grid dialog program and if yes, how do I define variants to loop through and fill out the values in the input/editable fields on the ALV grid?
Any help will be greatly appreciated! Rep points for sure!
Thanks!!!hi james ,
look at this link u will get an idea .
http://www.sapfans.com/forums/viewtopic.php?f=13&t=229912
http://sgstocks.tripod.com/alvgrid_control.htm
thanks,
Gaurav.
Edited by: gaurav.singh on Apr 20, 2010 7:53 AM -
Hi,
Can any one tell me about the possibility to display sub headings for an ALV grid control i.e to have a group of columns under one column similar to the feature in excel?
Regards,
SujathaHi Sujatha, also check this code.
REPORT ZALV5_OBJECTS.
TABLES : EKKO.
TYPE-POOLS : SLIS.
TYPES : BEGIN OF TY_EKKO,
EBELN TYPE EKPO-EBELN,
EBELP TYPE EKPO-EBELP,
STATU TYPE EKPO-STATU,
AEDAT TYPE EKPO-AEDAT,
MATNR TYPE EKPO-MATNR,
MENGE TYPE EKPO-MENGE,
MEINS TYPE EKPO-MEINS,
NETPR TYPE EKPO-NETPR,
PEINH TYPE EKPO-PEINH,
END OF TY_EKKO.
DATA: IT_EKKO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EKPO TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
IT_EMPTYTAB TYPE STANDARD TABLE OF TY_EKKO INITIAL SIZE 0,
WA_EKKO TYPE TY_EKKO,
WA_EKPO TYPE TY_EKKO.
DATA: OK_CODE LIKE SY-UCOMM, "OK-Code
SAVE_OK LIKE SY-UCOMM.
*ALV data declarations
DATA: FIELDCATALOG TYPE LVC_T_FCAT WITH HEADER LINE.
DATA: GD_FIELDCAT TYPE LVC_T_FCAT,
GD_TAB_GROUP TYPE SLIS_T_SP_GROUP_ALV,
GD_LAYOUT TYPE SLIS_LAYOUT_ALV.
*ALVtree data declarations
CLASS CL_GUI_COLUMN_TREE DEFINITION LOAD.
CLASS CL_GUI_CFW DEFINITION LOAD.
DATA: GD_TREE TYPE REF TO CL_GUI_ALV_TREE,
GD_HIERARCHY_HEADER TYPE TREEV_HHDR,
GD_REPORT_TITLE TYPE SLIS_T_LISTHEADER,
GD_LOGO TYPE SDYDO_VALUE,
GD_VARIANT TYPE DISVARIANT.
*Create container for alv-tree
DATA: GD_TREE_CONTAINER_NAME(30) TYPE C,
GD_CUSTOM_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER.
*Includes
*INCLUDE ZDEMO_ALVTREEO01. "Screen PBO Modules
*INCLUDE ZDEMO_ALVTREEI01. "Screen PAI Modules
*INCLUDE ZDEMO_ALVTREEF01. "ABAP Subroutines(FORMS)
*Start-of-selection.
START-OF-SELECTION.
ALVtree setup data
PERFORM DATA_RETRIEVAL.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
PERFORM BUILD_HIERARCHY_HEADER CHANGING GD_HIERARCHY_HEADER.
PERFORM BUILD_REPORT_TITLE USING GD_REPORT_TITLE GD_LOGO.
PERFORM BUILD_VARIANT.
Display ALVtree report
CALL SCREEN 100.
*& Form data_retrieval
text
--> p1 text
<-- p2 text
FORM DATA_RETRIEVAL .
SELECT EBELN
UP TO 10 ROWS
FROM EKKO
INTO CORRESPONDING FIELDS OF TABLE IT_EKKO.
LOOP AT IT_EKKO INTO WA_EKKO.
SELECT EBELN EBELP STATU AEDAT MATNR MENGE MEINS NETPR PEINH
FROM EKPO
APPENDING TABLE IT_EKPO
WHERE EBELN EQ WA_EKKO-EBELN.
ENDLOOP.
ENDFORM. " data_retrieval
*& Form build_fieldcatalog
text
--> p1 text
<-- p2 text
FORM BUILD_FIELDCATALOG .
Please not there are a number of differences between the structure of
ALVtree fieldcatalogs and ALVgrid fieldcatalogs.
For example the field seltext_m is replace by scrtext_m in ALVtree.
FIELDCATALOG-FIELDNAME = 'EBELN'. "Field name in itab
FIELDCATALOG-SCRTEXT_M = 'Purchase Order'. "Column text
FIELDCATALOG-COL_POS = 0. "Column position
FIELDCATALOG-OUTPUTLEN = 15. "Column width
FIELDCATALOG-EMPHASIZE = 'X'. "Emphasize (X or SPACE)
FIELDCATALOG-KEY = 'X'. "Key Field? (X or SPACE)
fieldcatalog-do_sum = 'X'. "Sum Column?
fieldcatalog-no_zero = 'X'. "Don't display if zero
APPEND FIELDCATALOG TO GD_FIELDCAT.
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'EBELP'.
FIELDCATALOG-SCRTEXT_M = 'PO Iten'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 1.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'STATU'.
FIELDCATALOG-SCRTEXT_M = 'Status'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 2.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'AEDAT'.
FIELDCATALOG-SCRTEXT_M = 'Item change date'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 3.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MATNR'.
FIELDCATALOG-SCRTEXT_M = 'Material Number'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 4.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MENGE'.
FIELDCATALOG-SCRTEXT_M = 'PO quantity'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 5.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'MEINS'.
FIELDCATALOG-SCRTEXT_M = 'Order Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 6.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'NETPR'.
FIELDCATALOG-SCRTEXT_M = 'Net Price'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 7.
FIELDCATALOG-DATATYPE = 'CURR'.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
FIELDCATALOG-FIELDNAME = 'PEINH'.
FIELDCATALOG-SCRTEXT_M = 'Price Unit'.
FIELDCATALOG-OUTPUTLEN = 15.
FIELDCATALOG-COL_POS = 8.
APPEND FIELDCATALOG TO GD_FIELDCAT..
CLEAR FIELDCATALOG.
ENDFORM. " build_fieldcatalog
*& Form build_layout
text
--> p1 text
<-- p2 text
FORM BUILD_LAYOUT .
GD_LAYOUT-NO_INPUT = 'X'.
GD_LAYOUT-COLWIDTH_OPTIMIZE = 'X'.
GD_LAYOUT-TOTALS_TEXT = 'Totals'(201).
gd_layout-totals_only = 'X'.
gd_layout-f2code = 'DISP'. "Sets fcode for when double
"click(press f2)
gd_layout-zebra = 'X'.
gd_layout-group_change_edit = 'X'.
gd_layout-header_text = 'helllllo'
ENDFORM. " build_layout
*& Form build_hierarchy_header
text
<--P_GD_HIERARCHY_HEADER text
FORM BUILD_HIERARCHY_HEADER CHANGING
P_HIERARCHY_HEADER TYPE TREEV_HHDR.
P_HIERARCHY_HEADER-HEADING = 'Hierarchy Header'(013).
P_HIERARCHY_HEADER-TOOLTIP = 'This is the Hierarchy Header !'(014).
P_HIERARCHY_HEADER-WIDTH = 30.
P_HIERARCHY_HEADER-WIDTH_PIX = ''.
ENDFORM. " build_hierarchy_header
*& Form build_report_title
text
-->P_GD_REPORT_TITLE text
-->P_GD_LOGO text
FORM BUILD_REPORT_TITLE USING PT_REPORT_TITLE TYPE SLIS_T_LISTHEADER
P_GD_LOGO TYPE SDYDO_VALUE.
DATA: LS_LINE TYPE SLIS_LISTHEADER,
LD_DATE(10) TYPE C.
List Heading Line(TYPE H)
CLEAR LS_LINE.
LS_LINE-TYP = 'H'.
ls_line-key "Not Used For This Type(H)
LS_LINE-INFO = 'PO ALVTree Display'.
APPEND LS_LINE TO PT_REPORT_TITLE.
Status Line(TYPE S)
LD_DATE(2) = SY-DATUM+6(2).
LD_DATE+2(1) = '/'.
LD_DATE3(2) = SY-DATUM4(2).
LD_DATE+5(1) = '/'.
LD_DATE+6(4) = SY-DATUM(4).
LS_LINE-TYP = 'S'.
LS_LINE-KEY = 'Date'.
LS_LINE-INFO = LD_DATE.
APPEND LS_LINE TO PT_REPORT_TITLE.
Action Line(TYPE A)
CLEAR LS_LINE.
LS_LINE-TYP = 'A'.
CONCATENATE 'Report: ' SY-REPID INTO LS_LINE-INFO SEPARATED BY SPACE.
APPEND LS_LINE TO PT_REPORT_TITLE.
ENDFORM. " build_report_title
*& Form build_variant
text
--> p1 text
<-- p2 text
FORM BUILD_VARIANT .
Set repid for storing variants
GD_VARIANT-REPORT = SY-REPID.
ENDFORM. " build_variant
cheers,
Hema. -
Hi,
I am totally new to ALV Grids. Could you give a full example of creating a ALV Grid with 2 columns, thinking there is a internal table itab with itab-col1 & itab-col2. Please start from initialising variables and onwards.
Thanks,
KishanHi,
Simple example of how to implement an ALV grid
Note that this example uses table ZSFLIGHT. The table is equivalent to the table SFLIGHT.
Steps:
1. Create an executable program (Report)
2. Create a screen (100) and place a custom container named ALV_CONTAINER on the screen
3. Create a Pushbutton. Give it the text Exit and the functioncode EXIT
REPORT sapmz_hf_alv_grid .
TABLES: zsflight.
G L O B A L I N T E R N A L T A B L E S
DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
g_wa_sflight LIKE sflight.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
Create objects
IF go_custom_container IS INITIAL.
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
PERFORM load_data_into_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Form load_data_into_grid
FORM load_data_into_grid.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
Load data into the grid and display them
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
CHANGING it_outtab = gi_sflight.
ENDFORM. " load_data_into_grid
Allow the user to save and reuse the layout
A button can be shown on the grid toolbar, allowing the user to save and reuse a layout. The button looks like this:
See also example in SAP standard program BCALV_GRID_09.
To do this use the parameters IS_VARIANT and I_SAVE of the set_table_for_first_display method. Note that the IS_VARIANT
parameter must have the structure DISVARIANT.
The I_SAVE "Options for saving layouts" parameter can have the following values:
· U Only user specific layouts can be saved
· X Only global layouts can be saved
· A Both user specific and global layouts can be saved
· Space Layouts can not be saved
Add the following code to the example:
FORM load_data_into_grid.
DATA:
For parameter IS_VARIANT
l_layout TYPE disvariant.
Code..........
Load data into the grid and display them
l_layout-report = sy-repid.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
CHANGING it_outtab = gi_
Integrate user defined functions in the grid toolbar
Possibilities:
· Replace existing functions in the toolbar or context men with user defined functions
· Add new functions to the toolbar or context menu
Note that the whole toolbar can be removed using the IT_TOOLBAR_EXCLUDING parameter of the set_table_for_first_display
method.
See also example in SAP standard program BCALV_GRID_05
1) To get access to the icons insert the following statement in the top of the program:
TYPE-POOLS: icon.
2) To allow the declaration of o_event_receiver before the lcl_event_receiver class is defined, declare it as deferred in the start of
the program
To allow the declaration of o_event_receiver before the lcl_event_receiver class is defined, declare it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
3) Declare reference to the event handler class
DATA:
o_event_receiver TYPE REF TO lcl_event_receiver.
4) Class for event receiver. This class adds the new button to the toolbar and handles the event when the button is pushed
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
5) In the PBO module, crate object for event handler and set handler
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
6) In the PBO module after the CALL METHOD go_grid->set_table_for_first_display, raise event
toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid
After CALL METHOD go_grid->set_table_for_first_display insert the following statement:
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
Set the title of the grid
Fill the grid_title field of structure lvc_s_layo.
Note that the structure lvc_s_layo can be used for to customize the grid appearance in many ways.
DATA:
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Set grid title
gs_layout-grid_title = 'Flights'.
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Customize the appearence of the grid
The structure lvc_s_layo contains fields for setting graphical properties, displaying exceptions, calculating totals and enabling specific
interaction options.
Fill the apporpiate fields of structure lvc_s_layo and insert it as a parameter in the CALL METHOD
go_grid->set_table_for_first_display. See the example under Set the title of the grid.
If you want to change apperance after list output, use the methods get_frontend_layout and set_frontend_layout.
Examples of fields in structure lvc_s_layo:
GRID_TITLE Setting the title of the grid
SEL_MODE. Selection mode, determines how rows can be selected. Can have the following values:
· A Multiple columns, multiple rows with selection buttons.
· B Simple selection, listbox, Single row/column
· C Multiple rows without buttons
· D Multiple rows with buttons and select all ICON
Setting and getting selected rows (Columns) and read line contents
You can read which rows of the grid that has been selected, and dynamic select rows of the grid using methods get_selected_rows
and set_selected_rows. There are similar methods for columns.
Note that the grid table always has the rows in the same sequence as displayed in the grid, thus you can use the index of the selected
row(s) to read the information in the rows from the table. In the examples below the grid table is named gi_sflight.
Data declaration:
DATA:
Internal table for indexes of selected rows
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
Example 1: Reading index of selected row(s) and using it to read the grid table
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a valid line'.
EXIT.
ENDIF.
LOOP AT gi_index_rows INTO g_selected_row.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Example 2: Set selected row(s).
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
exporting
it_index_rows = gi_index_rows.
ENDIF.
Make an Exception field ( = Traffic lights)
There can be defined a column in the grid for display of traffic lights. This field is of type Char 1, and can contain the following values:
· 1 Red
· 2 Yellow
· 3 Green
The name of the traffic light field is supplied inh the gs_layout-excp_fname used by method set_table_for_first_display.
Example
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
TYPES: traffic_light TYPE c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Set the exception field of the table
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the exception field (Traffic light field)
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Color a line
The steps for coloring a line i the grid is much the same as making a traffic light.
To color a line the structure of the table must include a Char 4 field for color properties
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
Loop trough the table to set the color properties of each line. The color properties field is
Char 4 and the characters is set as follows:
Char 1 = C = This is a color property
Char 2 = 6 = Color code (1 - 7)
Char 3 = Intensified on/of = 1 = on
Char 4 = Inverse display = 0 = of
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-line_color = 'C610'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Name of the color field
gs_layout-info_fname = 'LINE_COLOR'.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
Refresh grid display
Use the grid method REFRESH_TABLE_DISPLAY
Example:
CALL METHOD go_grid->refresh_table_display.
Complete code for the ALV grid example
This example shows and ALV grid with flights. After selecting a line a change button can be pushed to display a change screen. After
the changes have been saved, the ALV grid screen is displayed again, and the grid is updated with the changes.
The example shows:
· How to setup the ALV grid
· How to ste focus to the grid
· How to set the title of the grid
· How to allow a user to save and reuse a grid layout (Variant)
· How to customize the ALV grid toolbar
· Refresh the grid
· Set and get row selection and read line contents
· Make and exception field (Traffic light)
· Coloring a line
Steps:
· Create screen 100 with the ALV grid. Remember to include an exit button
· Add a change button to the ALV grid toolbar
· Create screen 200 the Change screen
The screens:
The code:
REPORT sapmz_hf_alv_grid .
Type pool for icons - used in the toolbar
TYPE-POOLS: icon.
TABLES: zsflight.
To allow the declaration of o_event_receiver before the
lcl_event_receiver class is defined, decale it as deferred in the
start of the program
CLASS lcl_event_receiver DEFINITION DEFERRED.
G L O B A L I N T E R N A L T A B L E S
*DATA: gi_sflight TYPE STANDARD TABLE OF sflight.
To include a traffic light and/or color a line the structure of the
table must include fields for the traffic light and/or the color
TYPES: BEGIN OF st_sflight.
INCLUDE STRUCTURE zsflight.
Field for traffic light
TYPES: traffic_light TYPE c.
Field for line color
types: line_color(4) type c.
TYPES: END OF st_sflight.
TYPES: tt_sflight TYPE STANDARD TABLE OF st_sflight.
DATA: gi_sflight TYPE tt_sflight.
G L O B A L D A T A
DATA: ok_code LIKE sy-ucomm,
Work area for internal table
g_wa_sflight TYPE st_sflight,
ALV control: Layout structure
gs_layout TYPE lvc_s_layo.
Declare reference variables to the ALV grid and the container
DATA:
go_grid TYPE REF TO cl_gui_alv_grid,
go_custom_container TYPE REF TO cl_gui_custom_container,
o_event_receiver TYPE REF TO lcl_event_receiver.
DATA:
Work area for screen 200
g_screen200 LIKE zsflight.
Data for storing information about selected rows in the grid
DATA:
Internal table
gi_index_rows TYPE lvc_t_row,
Information about 1 row
g_selected_row LIKE lvc_s_row.
C L A S S E S
CLASS lcl_event_receiver DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object e_interactive,
handle_user_command FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING e_ucomm.
ENDCLASS.
CLASS lcl_event_receiver IMPLEMENTATION
CLASS lcl_event_receiver IMPLEMENTATION.
METHOD handle_toolbar.
Event handler method for event toolbar.
CONSTANTS:
Constants for button type
c_button_normal TYPE i VALUE 0,
c_menu_and_default_button TYPE i VALUE 1,
c_menu TYPE i VALUE 2,
c_separator TYPE i VALUE 3,
c_radio_button TYPE i VALUE 4,
c_checkbox TYPE i VALUE 5,
c_menu_entry TYPE i VALUE 6.
DATA:
ls_toolbar TYPE stb_button.
Append seperator to the normal toolbar
CLEAR ls_toolbar.
MOVE c_separator TO ls_toolbar-butn_type..
APPEND ls_toolbar TO e_object->mt_toolbar.
Append a new button that to the toolbar. Use E_OBJECT of
event toolbar. E_OBJECT is of type CL_ALV_EVENT_TOOLBAR_SET.
This class has one attribute MT_TOOLBAR which is of table type
TTB_BUTTON. The structure is STB_BUTTON
CLEAR ls_toolbar.
MOVE 'CHANGE' TO ls_toolbar-function.
MOVE icon_change TO ls_toolbar-icon.
MOVE 'Change flight' TO ls_toolbar-quickinfo.
MOVE 'Change' TO ls_toolbar-text.
MOVE ' ' TO ls_toolbar-disabled.
APPEND ls_toolbar TO e_object->mt_toolbar.
ENDMETHOD.
METHOD handle_user_command.
Handle own functions defined in the toolbar
CASE e_ucomm.
WHEN 'CHANGE'.
PERFORM change_flight.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMETHOD.
ENDCLASS.
S T A R T - O F - S E L E C T I O N.
START-OF-SELECTION.
SET SCREEN '100'.
*& Module USER_COMMAND_0100 INPUT
MODULE user_command_0100 INPUT.
CASE ok_code.
WHEN 'EXIT'.
LEAVE TO SCREEN 0.
ENDCASE.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Module STATUS_0100 OUTPUT
MODULE status_0100 OUTPUT.
DATA:
For parameter IS_VARIANT that is sued to set up options for storing
the grid layout as a variant in method set_table_for_first_display
l_layout TYPE disvariant,
Utillity field
l_lines TYPE i.
After returning from screen 200 the line that was selected before
going to screen 200, should be selected again. The table gi_index_rows
was the output table from the GET_SELECTED_ROWS method in form
CHANGE_FLIGHT
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines > 0.
CALL METHOD go_grid->set_selected_rows
EXPORTING
it_index_rows = gi_index_rows.
CALL METHOD cl_gui_cfw=>flush.
REFRESH gi_index_rows.
ENDIF.
Read data and create objects
IF go_custom_container IS INITIAL.
Read data from datbase table
PERFORM get_data.
Create objects for container and ALV grid
CREATE OBJECT go_custom_container
EXPORTING container_name = 'ALV_CONTAINER'.
CREATE OBJECT go_grid
EXPORTING
i_parent = go_custom_container.
Create object for event_receiver class
and set handlers
CREATE OBJECT o_event_receiver.
SET HANDLER o_event_receiver->handle_user_command FOR go_grid.
SET HANDLER o_event_receiver->handle_toolbar FOR go_grid.
Layout (Variant) for ALV grid
l_layout-report = sy-repid. "Layout fo report
Setup the grid layout using a variable of structure lvc_s_layo
Set grid title
gs_layout-grid_title = 'Flights'.
Selection mode - Single row without buttons
(This is the default mode
gs_layout-sel_mode = 'B'.
Name of the exception field (Traffic light field) and the color
field + set the exception and color field of the table
gs_layout-excp_fname = 'TRAFFIC_LIGHT'.
gs_layout-info_fname = 'LINE_COLOR'.
LOOP AT gi_sflight INTO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
Value of traffic light field
g_wa_sflight-traffic_light = '1'.
Value of color field:
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
ELSE.
g_wa_sflight-traffic_light = '3'.
ENDIF.
MODIFY gi_sflight FROM g_wa_sflight.
ENDLOOP.
Grid setup for first display
CALL METHOD go_grid->set_table_for_first_display
EXPORTING i_structure_name = 'SFLIGHT'
is_variant = l_layout
i_save = 'A'
is_layout = gs_layout
CHANGING it_outtab = gi_sflight.
*-- End of grid setup -
Raise event toolbar to show the modified toolbar
CALL METHOD go_grid->set_toolbar_interactive.
Set focus to the grid. This is not necessary in this
example as there is only one control on the screen
CALL METHOD cl_gui_control=>set_focus EXPORTING control = go_grid.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0200 INPUT
MODULE user_command_0200 INPUT.
CASE ok_code.
WHEN 'EXIT200'.
LEAVE TO SCREEN 100.
WHEN'SAVE'.
PERFORM save_changes.
ENDCASE.
ENDMODULE. " USER_COMMAND_0200 INPUT
*& Form get_data
FORM get_data.
Read data from table SFLIGHT
SELECT *
FROM zsflight
INTO TABLE gi_sflight.
ENDFORM. " load_data_into_grid
*& Form change_flight
Reads the contents of the selected row in the grid, ans transfers
the data to screen 200, where it can be changed and saved.
FORM change_flight.
DATA:l_lines TYPE i.
REFRESH gi_index_rows.
CLEAR g_selected_row.
Read index of selected rows
CALL METHOD go_grid->get_selected_rows
IMPORTING
et_index_rows = gi_index_rows.
Check if any row are selected at all. If not
table gi_index_rows will be empty
DESCRIBE TABLE gi_index_rows LINES l_lines.
IF l_lines = 0.
CALL FUNCTION 'POPUP_TO_DISPLAY_TEXT'
EXPORTING
textline1 = 'You must choose a line'.
EXIT.
ENDIF.
Read indexes of selected rows. In this example only one
row can be selected as we are using gs_layout-sel_mode = 'B',
so it is only ncessary to read the first entry in
table gi_index_rows
LOOP AT gi_index_rows INTO g_selected_row.
IF sy-tabix = 1.
READ TABLE gi_sflight INDEX g_selected_row-index INTO g_wa_sflight.
ENDIF.
ENDLOOP.
Transfer data from the selected row to screenm 200 and show
screen 200
CLEAR g_screen200.
MOVE-CORRESPONDING g_wa_sflight TO g_screen200.
LEAVE TO SCREEN '200'.
ENDFORM. " change_flight
*& Form save_changes
Changes made in screen 200 are written to the datbase table
zsflight, and to the grid table gi_sflight, and the grid is
updated with method refresh_table_display to display the changes
FORM save_changes.
DATA: l_traffic_light TYPE c.
Update traffic light field
Update database table
MODIFY zsflight FROM g_screen200.
Update grid table , traffic light field and color field.
Note that it is necessary to use structure g_wa_sflight
for the update, as the screen structure does not have a
traffic light field
MOVE-CORRESPONDING g_screen200 TO g_wa_sflight.
IF g_wa_sflight-paymentsum < 100000.
g_wa_sflight-traffic_light = '1'.
C = Color, 6=Color 1=Intesified on, 0: Inverse display off
g_wa_sflight-line_color = 'C610'.
ELSEIF g_wa_sflight-paymentsum => 100000 AND
g_wa_sflight-paymentsum < 1000000.
g_wa_sflight-traffic_light = '2'.
clear g_wa_sflight-line_color.
ELSE.
g_wa_sflight-traffic_light = '3'.
clear g_wa_sflight-line_color.
ENDIF.
MODIFY gi_sflight INDEX g_selected_row-index FROM g_wa_sflight.
Refresh grid
CALL METHOD go_grid->refresh_table_display.
CALL METHOD cl_gui_cfw=>flush.
LEAVE TO SCREEN '100'.
ENDFORM. " save_changes
rgds,
latheesh -
First try with ALV Grid and Abap Objects
Hi,
this is my first try to write a simple report which just reads a textfile and display it in an ALV Grid. As a basis, I used some examples from SDN, but it did not work as expected
I would like just to use a docking container. I do not need a separate area for the ALV Grid. The report gives no syntax errors, but it just display the report title, nothing else. SAP R/3 Release is 4.7. Below is the source code of the report. Any idea what is missing?
*& Report Z_PLAN_TEXT_UPLOAD *
REPORT z_plan_text_upload.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_dynnr TYPE sy-dynnr,
gf_repid TYPE sy-repid.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Local Class Definition
* Local Class Implementation
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
SKIP.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SKIP.
PARAMETERS:
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn.
SELECTION-SCREEN END OF BLOCK b1.
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
gf_dynnr = sy-dynnr.
gf_repid = sy-repid.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog
CHANGING gt_fieldcat.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
* PARENT =
repid = gf_repid
dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
* RATIO =
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid IS INITIAL.
CREATE OBJECT go_alv_grid
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid is initial
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Kostenstelle' .
ls_fcat-seltext = 'Kostenstelle' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalogI have added some more functionality to my report. The good thing is, the report works as it should.
BUT, I'm not really sure, whether this is a good (correct) design. The report works the following way:
1. Read planning data form text file into internal table
2. Display the internal table
3. Convert the data and display the converted result
4. Post the converted data to the system
5. Display log with messages
The main thing is, I would like to know, do i really need two dynros, to display the two different internal tables or is it possible just to use one ALV-Grid? I was not able to find another solution. Any comment or help to the report is appreciated.
*& Report Z_PLAN_TEXT_UPLOAD_TEST *
REPORT z_plan_text_upload_test.
INCLUDE <icon>.
* Data Declaration
DATA:
gf_okcode TYPE ui_func,
gf_balloghndl TYPE balloghndl.
DATA:
go_docking_container TYPE REF TO cl_gui_docking_container,
go_alv_grid_0100 TYPE REF TO cl_gui_alv_grid,
go_alv_grid_0200 TYPE REF TO cl_gui_alv_grid.
DATA:
gt_fieldcat TYPE lvc_t_fcat,
gs_fieldcat LIKE LINE OF gt_fieldcat.
TYPES:
BEGIN OF gy_text_input,
firma(20) TYPE c,
kostenstelle(20) TYPE c,
datenart1(10) TYPE c,
planjahr(10) TYPE c,
* planperiode TYPE co_perio,
planperiode(5) TYPE c,
datenart2(10) TYPE c,
planungsposition(10) TYPE c,
* kostenart TYPE koart,
kostenart(10) TYPE c,
* planbetrag TYPE bapicurr_d,
planbetrag(20) TYPE c,
END OF gy_text_input.
DATA:
gt_text_input TYPE TABLE OF gy_text_input,
gs_text_input LIKE LINE OF gt_text_input.
* Bapi Strukturen
DATA:
gs_headerinfo TYPE bapiplnhdr,
gt_indexstructure TYPE TABLE OF bapiacpstru,
gs_indexstructure LIKE LINE OF gt_indexstructure,
gt_coobject TYPE TABLE OF bapipcpobj,
gs_coobject LIKE LINE OF gt_coobject,
gt_pervalue TYPE TABLE OF bapipcpval,
gs_pervalue LIKE LINE OF gt_pervalue,
gt_return TYPE TABLE OF bapiret2,
gs_return LIKE LINE OF gt_return,
gt_control TYPE TABLE OF bapipcpctrl,
gt_totvalue TYPE TABLE OF bapipcptot.
TYPES:
BEGIN OF gy_bapi_input,
version TYPE versn,
* perio TYPE co_perio,
fisc_year TYPE gjahr,
coobject(10) TYPE c,
cost_elem TYPE kstar,
wkgbtr01 TYPE wkgxxx,
wkgbtr02 TYPE wkgxxx,
wkgbtr03 TYPE wkgxxx,
wkgbtr04 TYPE wkgxxx,
wkgbtr05 TYPE wkgxxx,
wkgbtr06 TYPE wkgxxx,
wkgbtr07 TYPE wkgxxx,
wkgbtr08 TYPE wkgxxx,
wkgbtr09 TYPE wkgxxx,
wkgbtr10 TYPE wkgxxx,
wkgbtr11 TYPE wkgxxx,
wkgbtr12 TYPE wkgxxx,
END OF gy_bapi_input.
DATA:
gt_bapi_input TYPE TABLE OF gy_bapi_input,
gs_bapi_input LIKE LINE OF gt_bapi_input.
* Anwendungs-Log
DATA: gs_balsmsg TYPE bal_s_msg.
* Selection-Screen
SELECTION-SCREEN BEGIN OF BLOCK b1
WITH FRAME TITLE text-001.
PARAMETERS:
gp_file TYPE localfile,
gp_head TYPE checkbox DEFAULT 'X'.
SELECTION-SCREEN SKIP.
PARAMETERS:
gp_kokrs LIKE coep-kokrs,
gp_gjahr LIKE coep-gjahr,
gp_versn LIKE coep-versn,
gp_test AS CHECKBOX DEFAULT 'X'.
SELECTION-SCREEN END OF BLOCK b1.
* Local Class Definition
CLASS lcl_event_handler DEFINITION.
PUBLIC SECTION.
METHODS:
handle_toolbar_0100 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0100 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm,
handle_toolbar_0200 FOR EVENT toolbar OF cl_gui_alv_grid
IMPORTING
e_object
e_interactive,
handle_user_command_0200 FOR EVENT user_command OF cl_gui_alv_grid
IMPORTING
e_ucomm.
PRIVATE SECTION.
ENDCLASS. "lcl_event_handler DEFINITION
* Local Class Implementation
CLASS lcl_event_handler IMPLEMENTATION.
METHOD handle_toolbar_0100.
PERFORM handle_toolbar_0100
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0100.
PERFORM handle_user_command_0100
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
METHOD handle_toolbar_0200.
PERFORM handle_toolbar_0200
USING
e_object.
* e_interactive.
ENDMETHOD. "handle_toolbar_0100
METHOD handle_user_command_0200.
PERFORM handle_user_command_0200
USING
e_ucomm.
ENDMETHOD. "handle_user_command_0100
ENDCLASS. "lcl_event_handler IMPLEMENTATION
* Initialization
INITIALIZATION.
DATA:
lf_sapworkdir TYPE string.
CALL METHOD cl_gui_frontend_services=>get_sapgui_workdir
CHANGING
sapworkdir = lf_sapworkdir
EXCEPTIONS
get_sapworkdir_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0 OR lf_sapworkdir = ''.
CALL METHOD cl_gui_frontend_services=>directory_get_current
CHANGING
current_directory = lf_sapworkdir
EXCEPTIONS
directory_get_current_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
CALL METHOD cl_gui_cfw=>flush.
ENDIF."sy-subrc <> 0 OR sapworkdir = ''
gp_file = lf_sapworkdir.
* At Selection-Screen
AT SELECTION-SCREEN ON VALUE-REQUEST FOR gp_file.
DATA:
lt_filetable TYPE filetable,
ls_filetable LIKE LINE OF lt_filetable,
lt_rc TYPE i.
CALL METHOD cl_gui_frontend_services=>file_open_dialog
* EXPORTING
* WINDOW_TITLE =
* DEFAULT_EXTENSION =
* DEFAULT_FILENAME =
* FILE_FILTER =
* INITIAL_DIRECTORY =
* MULTISELECTION =
* WITH_ENCODING =
CHANGING
file_table = lt_filetable
rc = lt_rc
* USER_ACTION =
* FILE_ENCODING =
EXCEPTIONS
file_open_dialog_failed = 1
cntl_error = 2
error_no_gui = 3
not_supported_by_gui = 4
OTHERS = 5.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
READ TABLE lt_filetable INDEX 1
INTO
ls_filetable.
gp_file = ls_filetable-filename.
CALL METHOD cl_gui_cfw=>flush.
* Start-Of-Selection
START-OF-SELECTION.
DATA:
lf_filename LIKE filename-fileintern.
PERFORM create_log.
gs_return-type = 'I'.
IF gp_test = 'X'.
gs_return-message = text-010.
ELSE.
gs_return-message = text-020.
ENDIF.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
lf_filename = gp_file.
CALL FUNCTION 'FILE_READ_AND_CONVERT_SAP_DATA'
EXPORTING
i_filename = lf_filename
i_servertyp = 'PRS '
i_fileformat = 'TXT'
* I_FIELD_SEPERATOR =
i_line_header = gp_head
* IMPORTING
* E_BIN_FILELENGTH =
TABLES
i_tab_receiver = gt_text_input
EXCEPTIONS
file_not_found = 1
close_failed = 2
authorization_failed = 3
open_failed = 4
conversion_failed = 5
OTHERS = 6.
IF sy-subrc <> 0.
gs_balsmsg-msgty = sy-msgty.
gs_balsmsg-msgid = sy-msgid.
gs_balsmsg-msgno = sy-msgno.
gs_balsmsg-msgv1 = sy-msgv1.
gs_balsmsg-msgv2 = sy-msgv2.
gs_balsmsg-msgv3 = sy-msgv3.
gs_balsmsg-msgv4 = sy-msgv4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDIF.
CALL SCREEN '0100'.
*& Module status_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999 "full-screen size !!!
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0100'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog ---------------------------------------*
PERFORM build_fieldcatalog_input
CHANGING gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0100 IS INITIAL.
CREATE OBJECT go_alv_grid_0100
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0100 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0100 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0100.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0100->handle_toolbar_0100
FOR go_alv_grid_0100.
SET HANDLER go_event_handler_0100->handle_user_command_0100
FOR go_alv_grid_0100.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0100->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_text_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0100->set_toolbar_interactive.
ENDMODULE. " status_0100 OUTPUT
*& Module status_0200 OUTPUT
* text
MODULE status_0200 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
*------ Create the docking container ----------------------------------*
IF go_docking_container IS INITIAL.
CREATE OBJECT go_docking_container
EXPORTING
parent = cl_gui_container=>screen0
* repid = gf_repid
* dynnr = gf_dynnr
* SIDE = go_docking_container->DOCK_AT_bottom
* EXTENSION = 200
* STYLE =
* LIFETIME = lifetime_default
* CAPTION =
* METRIC = 0
ratio = 95
* NO_AUTODEF_PROGID_DYNNR =
* NAME =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Expand docking container to full screen -------------------*
CALL METHOD go_docking_container->set_extension
EXPORTING
extension = 99999
EXCEPTIONS
cntl_error = 1
OTHERS = 2.
IF sy-subrc = 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_docking_container IS INITIAL
*------ Link docking container to screen ------------------------------*
CALL METHOD go_docking_container->link
EXPORTING
repid = sy-repid
dynnr = '0200'
* CONTAINER =
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
lifetime_dynpro_dynpro_link = 3
OTHERS = 4
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*------ Build the Field Catalog---------------------------------------*
PERFORM build_fieldcatalog_bapi_input
CHANGING
gt_fieldcat.
*------ Create the ALV Grid -------------------------------------------*
IF go_alv_grid_0200 IS INITIAL.
CREATE OBJECT go_alv_grid_0200
EXPORTING
* I_SHELLSTYLE = 0
* I_LIFETIME =
i_parent = go_docking_container
* I_APPL_EVENTS = space
* I_PARENTDBG =
* I_APPLOGPARENT =
* I_GRAPHICSPARENT =
* I_NAME =
EXCEPTIONS
error_cntl_create = 1
error_cntl_init = 2
error_cntl_link = 3
error_dp_create = 4
OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDIF."go_alv_grid_0200 is initial
*------ Create instance for event handler -----------------------------*
DATA: go_event_handler_0200 TYPE REF TO lcl_event_handler.
CREATE OBJECT go_event_handler_0200.
*------ Register event handler ----------------------------------------*
SET HANDLER go_event_handler_0200->handle_toolbar_0200
FOR go_alv_grid_0200.
SET HANDLER go_event_handler_0200->handle_user_command_0200
FOR go_alv_grid_0200.
*------ Call ALV Grid -------------------------------------------------*
CALL METHOD go_alv_grid_0200->set_table_for_first_display
* EXPORTING
* I_BUFFER_ACTIVE =
* I_BYPASSING_BUFFER =
* I_CONSISTENCY_CHECK =
* I_STRUCTURE_NAME =
* IS_VARIANT =
* I_SAVE =
* I_DEFAULT = 'X'
* IS_LAYOUT =
* IS_PRINT =
* IT_SPECIAL_GROUPS =
* IT_TOOLBAR_EXCLUDING =
* IT_HYPERLINK =
* IT_ALV_GRAPHICS =
* IT_EXCEPT_QINFO =
CHANGING
it_outtab = gt_bapi_input
it_fieldcatalog = gt_fieldcat
* IT_SORT =
* IT_FILTER =
EXCEPTIONS
invalid_parameter_combination = 1
program_error = 2
too_many_lines = 3
OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
*---- Call method 'set_toolbar_interactive' to raise event TOOLBAR.
CALL METHOD go_alv_grid_0200->set_toolbar_interactive.
CALL METHOD go_alv_grid_0200->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
EXCEPTIONS
finished = 1
OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
CALL METHOD cl_gui_control=>set_focus
EXPORTING
control = go_alv_grid_0200.
ENDMODULE. " status_0200 OUTPUT
*& Module user_command_0100 INPUT
* text
MODULE user_command_0100 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0100 INPUT
*& Module user_command_0200 INPUT
* text
MODULE user_command_0200 INPUT.
CASE gf_okcode.
WHEN 'BACK' OR 'END' OR 'CANC'.
PERFORM exit_program.
WHEN OTHERS.
ENDCASE.
CLEAR gf_okcode.
ENDMODULE. " user_command_0200 INPUT
*& Form build_fieldcatalog
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
ls_fcat-fieldname = 'FIRMA' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Firma' .
ls_fcat-seltext = 'Firma' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENSTELLE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART1' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart1' .
ls_fcat-seltext = 'Datenart1' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANJAHR' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planjahr' .
ls_fcat-seltext = 'Planjahr' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANPERIODE' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '5' .
ls_fcat-coltext = 'Planperiode' .
ls_fcat-seltext = 'Planperiode' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'DATENART2' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Datenart2' .
ls_fcat-seltext = 'Datenart2' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANUNGSPOSITION' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Planungsposition' .
ls_fcat-seltext = 'Planungsposition' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'KOSTENART' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '10' .
ls_fcat-coltext = 'Kostenart' .
ls_fcat-seltext = 'Kostenart' .
APPEND ls_fcat TO pt_fieldcat .
ls_fcat-fieldname = 'PLANBETRAG' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'Planbetrag' .
ls_fcat-seltext = 'Planbetrag' .
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. "build_fieldcatalog
*& Form handle_toolbar_0100
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0100
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'KONV'.
ls_toolbar-quickinfo = 'Konvertieren'.
ls_toolbar-text = 'Konvertieren'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0100
*& Form handle_user_command_0100
* text
* -->P_E_UCOMM text
FORM handle_user_command_0100
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'KONV'.
PERFORM convert_data.
ENDCASE.
ENDFORM. " handle_user_command_0100
*& Form exit_program
* text
* --> p1 text
* <-- p2 text
FORM exit_program.
CALL METHOD go_alv_grid_0100->free.
IF NOT go_alv_grid_0200 IS INITIAL.
CALL METHOD go_alv_grid_0200->free.
ENDIF.
CALL METHOD go_docking_container->free.
CALL METHOD cl_gui_cfw=>flush.
IF sy-subrc NE 0.
* add your handling, for example
CALL FUNCTION 'POPUP_TO_INFORM'
EXPORTING
titel = sy-repid
txt2 = sy-subrc
txt1 = 'Error in Flush'(500).
ENDIF.
LEAVE PROGRAM.
ENDFORM. " exit_program
*& Form handle_toolbar_0200
* text
* -->P_E_OBJECT text
* -->P_E_INTERACTIVE text
FORM handle_toolbar_0200
USING
po_object TYPE REF TO cl_alv_event_toolbar_set.
DATA: ls_toolbar TYPE stb_button.
CLEAR ls_toolbar.
ls_toolbar-butn_type = 0.
ls_toolbar-function = 'POST'.
ls_toolbar-quickinfo = 'Buchen'.
ls_toolbar-text = 'Buchen'.
ls_toolbar-disabled = ' '.
APPEND ls_toolbar TO po_object->mt_toolbar.
ENDFORM. " handle_toolbar_0200
*& Form handle_user_command_0200
* text
* -->P_E_UCOMM text
FORM handle_user_command_0200
USING
pf_ucomm TYPE syucomm.
CASE pf_ucomm.
WHEN 'POST'.
PERFORM post.
ENDCASE.
ENDFORM. " handle_user_command_0200
*& Form convert_data
* text
* --> p1 text
* <-- p2 text
FORM convert_data.
DATA: lf_perio(3) TYPE n.
LOOP AT gt_text_input INTO gs_text_input.
TRANSLATE gs_text_input-planbetrag USING '. '.
TRANSLATE gs_text_input-planbetrag USING ',.'.
CONDENSE gs_text_input-planbetrag.
gs_bapi_input-version = gp_versn.
gs_bapi_input-fisc_year = gp_gjahr.
gs_bapi_input-coobject = gs_text_input-kostenstelle.
gs_bapi_input-cost_elem = gs_text_input-kostenart.
lf_perio = gs_text_input-planperiode.
CASE lf_perio.
WHEN '001'.
gs_bapi_input-wkgbtr01 = gs_text_input-planbetrag.
WHEN '002'.
gs_bapi_input-wkgbtr02 = gs_text_input-planbetrag.
WHEN '003'.
gs_bapi_input-wkgbtr03 = gs_text_input-planbetrag.
WHEN '004'.
gs_bapi_input-wkgbtr04 = gs_text_input-planbetrag.
WHEN '005'.
gs_bapi_input-wkgbtr05 = gs_text_input-planbetrag.
WHEN '006'.
gs_bapi_input-wkgbtr06 = gs_text_input-planbetrag.
WHEN '007'.
gs_bapi_input-wkgbtr07 = gs_text_input-planbetrag.
WHEN '008'.
gs_bapi_input-wkgbtr08 = gs_text_input-planbetrag.
WHEN '009'.
gs_bapi_input-wkgbtr09 = gs_text_input-planbetrag.
WHEN '010'.
gs_bapi_input-wkgbtr10 = gs_text_input-planbetrag.
WHEN '011'.
gs_bapi_input-wkgbtr11 = gs_text_input-planbetrag.
WHEN '012'.
gs_bapi_input-wkgbtr12 = gs_text_input-planbetrag.
ENDCASE.
COLLECT gs_bapi_input INTO gt_bapi_input.
CLEAR gs_bapi_input.
ENDLOOP. "at gt_text_input
CALL SCREEN 0200.
ENDFORM. " convert_data
*& Form build_fieldcatalog_bapi_input
* text
* <--P_GT_FIELDCAT text
FORM build_fieldcatalog_bapi_input
CHANGING
pt_fieldcat TYPE lvc_t_fcat.
DATA ls_fcat TYPE lvc_s_fcat.
CLEAR pt_fieldcat.
CLEAR ls_fcat.
ls_fcat-fieldname = 'VERSION' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'FISC_YEAR' .
ls_fcat-ref_table = 'BAPIPLNHDR' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COOBJECT' .
ls_fcat-inttype = 'C' .
ls_fcat-outputlen = '20' .
ls_fcat-coltext = 'CO-Objekt' .
ls_fcat-seltext = 'CO-Objekt' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'COST_ELEM' .
ls_fcat-ref_table = 'BAPIPCPVAL' .
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR01'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR02'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR03'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR04'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR05'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR06'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR07'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR08'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR09'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR10'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR11'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
CLEAR ls_fcat.
ls_fcat-fieldname = 'WKGBTR12'.
ls_fcat-ref_table = 'COEP' .
ls_fcat-ref_field = 'WKGBTR'.
APPEND ls_fcat TO pt_fieldcat .
ENDFORM. " build_fieldcatalog_bapi_input
*& Form post
* text
* --> p1 text
* <-- p2 text
FORM post.
DATA:
lf_index(6) TYPE n,
lf_kostl LIKE csks-kostl,
lf_aufnr LIKE aufk-aufnr,
lf_kstar LIKE cska-kstar.
DATA:
lt_csks TYPE TABLE OF csks.
break c5085345.
* Header
gs_headerinfo-co_area = gp_kokrs.
gs_headerinfo-fisc_year = gp_gjahr.
gs_headerinfo-period_from = '001'.
gs_headerinfo-period_to = '012'.
gs_headerinfo-version = gp_versn.
gs_headerinfo-plan_currtype = 'C'.
LOOP AT gt_bapi_input INTO gs_bapi_input.
* Fill index structure
CLEAR gs_indexstructure.
lf_index = sy-tabix.
gs_indexstructure-object_index = lf_index.
gs_indexstructure-value_index = lf_index.
gs_indexstructure-attrib_index = '000000'.
INSERT gs_indexstructure INTO TABLE gt_indexstructure.
* Fill coobject
CLEAR gs_coobject.
gs_coobject-object_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_kostl.
SELECT * FROM csks INTO TABLE lt_csks
WHERE
kokrs = gp_kokrs AND
kostl = lf_kostl.
IF sy-subrc = 0.
gs_coobject-costcenter = lf_kostl.
ELSE.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-coobject
IMPORTING
output = lf_aufnr.
CALL FUNCTION 'K_ORDER_READ'
EXPORTING
aufnr = lf_aufnr
EXCEPTIONS
not_found = 1.
IF NOT sy-subrc = 0.
gs_return-type = 'E'.
gs_return-message+0(10) = 'CO-Objekt '.
gs_return-message+10(10) = gs_bapi_input-coobject.
gs_return-message+20(20) = ' existiert nicht.'.
CONDENSE gs_return-message.
PERFORM add_log_message_free_text
USING
gs_return-type
gs_return-message.
EXIT.
ENDIF. "IF NOT sy-subrc = 0
gs_coobject-orderid = lf_aufnr.
ENDIF. "sy-subrc = 0
INSERT gs_coobject INTO TABLE gt_coobject.
* Period value
gs_pervalue-value_index = lf_index.
CALL FUNCTION 'CONVERSION_EXIT_ALPHA_INPUT'
EXPORTING
input = gs_bapi_input-cost_elem
IMPORTING
output = lf_kstar.
gs_pervalue-cost_elem = lf_kstar.
gs_pervalue-fix_val_per01 = gs_bapi_input-wkgbtr01.
gs_pervalue-fix_val_per02 = gs_bapi_input-wkgbtr02.
gs_pervalue-fix_val_per03 = gs_bapi_input-wkgbtr03.
gs_pervalue-fix_val_per04 = gs_bapi_input-wkgbtr04.
gs_pervalue-fix_val_per05 = gs_bapi_input-wkgbtr05.
gs_pervalue-fix_val_per06 = gs_bapi_input-wkgbtr06.
gs_pervalue-fix_val_per07 = gs_bapi_input-wkgbtr07.
gs_pervalue-fix_val_per08 = gs_bapi_input-wkgbtr08.
gs_pervalue-fix_val_per09 = gs_bapi_input-wkgbtr09.
gs_pervalue-fix_val_per10 = gs_bapi_input-wkgbtr10.
gs_pervalue-fix_val_per11 = gs_bapi_input-wkgbtr11.
gs_pervalue-fix_val_per12 = gs_bapi_input-wkgbtr12.
INSERT gs_pervalue INTO TABLE gt_pervalue.
ENDLOOP. "at gt_bapi_input
* Buchungsbaustein
CALL FUNCTION 'BAPI_PRIM_COST_CHECK_AND_POST'
EXPORTING
header_info = gs_headerinfo
testrun = gp_test
* DELTA = ' '
TABLES
idx_structure = gt_indexstructure
object = gt_coobject
per_value = gt_pervalue
tot_value = gt_totvalue
contrl = gt_control
return = gt_return.
CALL FUNCTION 'BAPI_TRANSACTION_COMMIT'.
* EXPORTING
* WAIT =
* IMPORTING
* RETURN =
LOOP AT gt_return INTO gs_return.
gs_balsmsg-msgty = gs_return-type.
gs_balsmsg-msgid = gs_return-id.
gs_balsmsg-msgno = gs_return-number.
gs_balsmsg-msgv1 = gs_return-message_v1.
gs_balsmsg-msgv2 = gs_return-message_v2.
gs_balsmsg-msgv3 = gs_return-message_v3.
gs_balsmsg-msgv4 = gs_return-message_v4.
PERFORM add_log_message
USING
gs_balsmsg.
ENDLOOP. "AT gt_return
PERFORM show_log.
ENDFORM. " post
*& Form create_log
* text
* --> p1 text
* <-- p2 text
FORM create_log .
DATA: ls_balslog TYPE bal_s_log.
* Einige Verwaltungsdaten
ls_balslog-extnumber = 'ZPLAN010'.
ls_balslog-aluser = sy-uname.
ls_balslog-alprog = sy-repid.
* Create
CALL FUNCTION 'BAL_LOG_CREATE'
EXPORTING
i_s_log = ls_balslog
* IMPORTING
* e_log_handle = gf_balloghndl
EXCEPTIONS
log_header_inconsistent = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " create_log
*& Form add_log_message
* text
* -->P_GS_BALSMSG text
FORM add_log_message
USING
ps_balsmsg TYPE bal_s_msg.
break c5085345.
CALL FUNCTION 'BAL_LOG_MSG_ADD'
EXPORTING
* I_LOG_HANDLE =
i_s_msg = ps_balsmsg
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_messa
*& Form add_log_message_free_text
* text
* -->P_GS_RETURN_TYPE text
* -->P_GS_RETURN_MESSAGE text
FORM add_log_message_free_text
USING
ps_type
ps_message.
CALL FUNCTION 'BAL_LOG_MSG_ADD_FREE_TEXT'
EXPORTING
* I_LOG_HANDLE =
i_msgty = ps_type
* I_PROBCLASS = '4'
i_text = ps_message
* I_S_CONTEXT =
* I_S_PARAMS =
* IMPORTING
* E_S_MSG_HANDLE =
* E_MSG_WAS_LOGGED =
* E_MSG_WAS_DISPLAYED =
EXCEPTIONS
log_not_found = 1
msg_inconsistent = 2
log_is_full = 3
OTHERS = 4.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
ENDFORM. " add_log_message_free_text
*& Form show_log
* text
* --> p1 text
* <-- p2 text
FORM show_log .
DATA:
l_s_display_profile TYPE bal_s_prof.
* get display profile
CALL FUNCTION 'BAL_DSP_PROFILE_NO_TREE_GET'
IMPORTING
e_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
* use grid for display if wanted
l_s_display_profile-use_grid = 'X'.
* set report to allow saving of variants
l_s_display_profile-disvariant-report = sy-repid.
* when you use also other ALV lists in your report,
* please specify a handle to distinguish between the display
* variants of these different lists, e.g:
l_s_display_profile-disvariant-handle = 'LOG'.
* call display function module
* We do not specify any filter (like I_S_LOG_FILTER, ...,
* I_T_MSG_HANDLE) since we want to display all logs available
CALL FUNCTION 'BAL_DSP_LOG_DISPLAY'
EXPORTING
i_s_display_profile = l_s_display_profile
EXCEPTIONS
OTHERS = 1.
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF. -
Selection using check box in std ALV grid!
Hi all,
I have written a custom report to show the O/p in ALV grid.
This is my code:
TABLES :zpo_loi.
TYPE-POOLS : slis.
TYPE-POOLS: icon.
TABLES : sscrfields.
DATA : ls_composer TYPE ssfcompop,
ls_control TYPE ssfctrlop.
DATA : wa_return TYPE TABLE OF bapiret2 ,
wa_address TYPE bapiaddr3.
DATA : wa_crmd_orderadm_h TYPE zpo_loi,
it_po TYPE TABLE OF crmd_orderadm_h,
wa_po TYPE bbp_pds_header.
DATA : it_tab TYPE TABLE OF zpo_loi.
DATA : it_data TYPE TABLE OF crmd_orderadm_h,
wa_data TYPE bbp_pds_header,
et_data TYPE bbps_sf_po_output.
DATA : w_formname TYPE tdsfname ,
w_sfname TYPE rs38l_fnam.
DATA :it_po_no TYPE TABLE OF select_be_obj_id,
wa_it_po_no LIKE LINE OF it_po_no.
DATA :r_itab TYPE ddshretval OCCURS 0.
DATA : it_output LIKE TABLE OF zloi,
wa_output TYPE zloi.
DATA : w_answer TYPE c.
DATA : g_repid LIKE sy-repid,
g_title TYPE lvc_title,
g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
g_layout TYPE slis_layout_alv,
g_print_alv TYPE slis_print_alv,
g_variant LIKE disvariant,
c_char_a(1) VALUE 'A',
c_char_x(1) VALUE 'X',
itab_alv_sort TYPE slis_t_sortinfo_alv,
itab_alv_fcat TYPE slis_t_fieldcat_alv.
* Internal tables Begin with IT_ *
DATA : it_fcat TYPE slis_t_fieldcat_alv, "---ALV
it_disp TYPE TABLE OF zloi.
* Work Area for Internal tables Begin with WA_ *
DATA : wa_fcat TYPE slis_fieldcat_alv , "---ALV
wa_layout TYPE lvc_s_layo, "---ALV
wa_it_disp LIKE LINE OF it_disp.
DATA : it_sf_po TYPE TABLE OF crmd_orderadm_h,
wa_sf_po TYPE bbp_pds_header.
*SELECTION-SCREEN:
* BEGIN OF SCREEN 500 AS WINDOW TITLE title,
* END OF SCREEN 500.
*DATA : functxt TYPE smp_dyntxt.
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS sel_po FOR zpo_loi-zobject_id.
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS : pr_loi RADIOBUTTON GROUP grp1 USER-COMMAND ucom,
pr_fondo RADIOBUTTON GROUP grp1.
SELECTION-SCREEN END OF BLOCK b2.
* At selection-screen output *
AT SELECTION-SCREEN OUTPUT.
IF pr_fondo = 'X'.
REFRESH sel_po.
LOOP AT SCREEN.
IF screen-name = text-003 OR screen-name = text-004.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF pr_loi = 'X'.
LOOP AT SCREEN.
IF screen-name = text-003 OR screen-name = text-004.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
* At selection-screen on radiobutton *
AT SELECTION-SCREEN ON RADIOBUTTON GROUP grp1.
IF pr_fondo = 'X'.
REFRESH sel_po.
LOOP AT SCREEN.
IF screen-name = text-003 OR screen-name = text-004.
screen-input = '0'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ELSEIF pr_loi = 'X'.
LOOP AT SCREEN.
IF screen-name = text-003 OR screen-name = text-004.
screen-input = '1'.
MODIFY SCREEN.
ENDIF.
ENDLOOP.
ENDIF.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-low.
PERFORM populate_table.
PERFORM f4_help.
AT SELECTION-SCREEN ON VALUE-REQUEST FOR sel_po-high.
PERFORM populate_table.
PERFORM f4_help.
* At selection-screen *
AT SELECTION-SCREEN.
*---CHECKING THE INPUT >>>
IF sy-ucomm = 'ONLI'.
PERFORM f002-check_input.
PERFORM f001-check.
ENDIF.
*& Form POPULATE_TABLE
* text
* --> p1 text
* <-- p2 text
FORM populate_table .
SELECT zobject_id
description
FROM zpo_loi
INTO CORRESPONDING FIELDS OF TABLE it_tab.
SORT it_tab BY zobject_id ASCENDING.
ENDFORM. " POPULATE_TABLE
*& Form F4_HELP
* text
* --> p1 text
* <-- p2 text
FORM f4_help .
CALL FUNCTION 'F4IF_INT_TABLE_VALUE_REQUEST'
EXPORTING
ddic_structure = ' '
retfield = 'ZOBJECT_ID'
dynpprog = sy-repid
dynpnr = sy-dynnr
dynprofield = 'A'
value_org = 'S'
TABLES
value_tab = it_tab
return_tab = r_itab.
ENDFORM. " F4_HELP
*& Form F001-CHECK
* text
* --> p1 text
* <-- p2 text
FORM f001-check .
IF pr_fondo = 'X'.
PERFORM display_expiring_fondos.
ELSEIF pr_loi = 'X'.
PERFORM fetch_po_det.
PERFORM build_fcat.
PERFORM alv_display.
ENDIF.
ENDFORM. " F001-CHECK
*& Form F002-CHECK_INPUT
* text
* --> p1 text
* <-- p2 text
FORM f002-check_input .
IF pr_loi = 'X'.
REFRESH it_po.
IF sel_po-low IS NOT INITIAL.
SELECT object_id
FROM crmd_orderadm_h
INTO CORRESPONDING FIELDS OF TABLE it_po
WHERE object_type = 'BUS2201'
AND object_id = sel_po-low.
IF sy-subrc NE 0.
IF sel_po-high IS NOT INITIAL.
SELECT object_id
FROM crmd_orderadm_h
INTO CORRESPONDING FIELDS OF TABLE it_po
WHERE object_type = 'BUS2201'
AND object_id = sel_po-high.
IF sy-subrc NE 0.
MESSAGE e009(zsrm).
ENDIF.
ENDIF.
MESSAGE e007(zsrm).
ENDIF.
ELSE.
MESSAGE e010(zsrm).
ENDIF.
IF sel_po-high IS NOT INITIAL.
SELECT object_id
FROM crmd_orderadm_h
INTO CORRESPONDING FIELDS OF TABLE it_po
WHERE object_type = 'BUS2201'
AND object_id = sel_po-high.
IF sy-subrc NE 0.
MESSAGE e008(zsrm).
ENDIF.
ENDIF.
ENDIF.
ENDFORM. " F002-CHECK_INPUT
*& Form FETCH_PO_DET
* text
* --> p1 text
* <-- p2 text
FORM fetch_po_det .
REFRESH it_po.
it_po_no[] = sel_po[].
DATA : w_count TYPE i,
w_lines TYPE c,
wa_header TYPE bbp_pds_po_header_d.
REFRESH : it_po,it_output.
IF sel_po-high IS NOT INITIAL.
SELECT object_id
description
posting_date
created_by
FROM crmd_orderadm_h
INTO CORRESPONDING FIELDS OF TABLE it_po
WHERE object_type = 'BUS2201'
AND object_id BETWEEN sel_po-low AND sel_po-high.
ELSE.
SELECT object_id
description
posting_date
created_by
FROM crmd_orderadm_h
INTO CORRESPONDING FIELDS OF TABLE it_po
WHERE object_type = 'BUS2201'
AND object_id = sel_po-low.
ENDIF.
w_lines = sy-dbcnt.
w_count = 1.
DO.
IF w_count LE w_lines.
READ TABLE it_po INTO wa_po INDEX w_count.
MOVE wa_po-object_id TO wa_output-zzpono.
MOVE wa_po-description TO wa_output-zzpodesc.
MOVE wa_po-posting_date TO wa_output-zzpodate.
MOVE wa_po-created_by TO wa_output-zzpocreator.
CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
EXPORTING
i_object_id = wa_output-zzpono
IMPORTING
e_header = wa_header.
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = wa_output-zzpocreator
IMPORTING
address = wa_address
TABLES
return = wa_return.
CLEAR wa_output-zzpocreator.
CONCATENATE wa_address-firstname ' ' wa_address-lastname INTO wa_output-zzpocreator .
MOVE wa_header-total_value TO wa_output-zzpoval.
MOVE wa_header-currency TO wa_output-zzpocur.
APPEND wa_output TO it_output.
w_count = w_count + 1.
ELSE.
EXIT.
ENDIF.
ENDDO.
ENDFORM. " FETCH_PO_DET
*& Form BUILD_FCAT
* text
* --> p1 text
* <-- p2 text
FORM build_fcat .
g_repid = sy-repid.
g_title = 'Print LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
REFRESH it_fcat.
*Po no
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Description
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
APPEND wa_fcat TO it_fcat.
*Posting date
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
APPEND wa_fcat TO it_fcat.
*value
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
wa_fcat-no_zero = 'X'.
APPEND wa_fcat TO it_fcat.
*Currency
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
APPEND wa_fcat TO it_fcat.
*Creator
CLEAR wa_fcat.
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
APPEND wa_fcat TO it_fcat.
ENDFORM. " BUILD_FCAT
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM alv_display .
SORT it_output BY zzpono.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = g_repid
i_callback_pf_status_set = g_set_pf_stat
i_callback_user_command = g_user_command
i_grid_title = g_title
is_layout = g_layout
it_fieldcat = it_fcat[]
is_variant = g_variant
is_print = g_print_alv
TABLES
t_outtab = it_output[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
DATA: gd_repid LIKE sy-repid, "Exists
ref_grid TYPE REF TO cl_gui_alv_grid.
IF ref_grid IS INITIAL.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
e_grid = ref_grid.
ENDIF.
IF NOT ref_grid IS INITIAL.
CALL METHOD ref_grid->check_changed_data .
ENDIF.
rs_selfield-refresh = 'X'.
CASE r_ucomm.
WHEN 'PRINTLOI'.
PERFORM call_sf.
WHEN 'BACK'.
CALL SELECTION-SCREEN 1000.
WHEN 'CANCEL'.
CALL SELECTION-SCREEN 1000.
WHEN 'EXIT'.
CALL SELECTION-SCREEN 1000.
ENDCASE.
ENDFORM. "user_command
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZALV' EXCLUDING rt_extab.
SET TITLEBAR 'ZALV'.
ENDFORM. "set_pf_status
*& Form CALL_SF
* text
* --> p1 text
* <-- p2 text
FORM call_sf .
REFRESH it_sf_po.
LOOP AT it_output INTO wa_output WHERE zzcheck = 'X'.
wa_sf_po-object_id = wa_output-zzpono.
APPEND wa_sf_po TO it_sf_po.
ENDLOOP.
w_formname = 'ZSR_EBP_DOCU_LETTEROFINTENT1'.
CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
EXPORTING
formname = w_formname
IMPORTING
fm_name = w_sfname
EXCEPTIONS
no_form = 1
no_function_module = 2
OTHERS = 3.
IF sy-subrc <> 0.
ENDIF.
ls_composer-tdnewid = 'X'.
ls_control-no_dialog = 'X'.
LOOP AT it_sf_po INTO wa_sf_po.
CALL FUNCTION w_sfname
EXPORTING
control_parameters = ls_control
output_options = ls_composer
wa_object = wa_sf_po
EXCEPTIONS
formatting_error = 1
internal_error = 2
send_error = 3
user_canceled = 4
OTHERS = 5.
IF sy-subrc <> 0.
ENDIF.
ENDLOOP.
ENDFORM. " CALL_SF
*& Form DISPLAY_EXPIRING_FONDOS
* text
* --> p1 text
* <-- p2 text
FORM display_expiring_fondos .
SET PF-STATUS 'ZLOI'.
SET TITLEBAR 'ZLOI'.
TYPES : BEGIN OF ty_output1,
guid TYPE bbp_guid,
object_id TYPE crmt_object_id_db,
description TYPE crmt_process_description,
posting_date TYPE crmt_posting_date,
zzfondo_dat TYPE zfondo_dat,
created_by TYPE crmt_created_by,
END OF ty_output1.
DATA : it_output1 TYPE TABLE OF ty_output1,
wa_output1 TYPE ty_output1,
w_lines,
w_count,
it_fondo TYPE TABLE OF zsr_fondo,
it_temp_fondo TYPE TABLE OF zsr_fondo,
wa_temp_fondo TYPE zsr_fondo,
wa_fondo TYPE zsr_fondo,
w_diff TYPE p,
wa_header1 TYPE bbp_pds_po_header_d.
CONSTANTS : c_otype(8) VALUE 'BUS2201'.
REFRESH : it_output1,it_temp_fondo,it_fondo.
SELECT b~zzfondo_dat
a~guid
a~object_id
a~description
a~posting_date
a~created_by
INTO CORRESPONDING FIELDS OF TABLE it_output1
FROM bbp_pdhsc AS b
LEFT OUTER JOIN crmd_orderadm_h AS a ON b~guid = a~guid
AND a~object_type = c_otype.
LOOP AT it_output1 INTO wa_output1.
CALL FUNCTION '/SDF/CMO_DATETIME_DIFFERENCE'
EXPORTING
date1 = sy-datum
date2 = wa_output1-zzfondo_dat
IMPORTING
datediff = w_diff
EXCEPTIONS
invalid_datetime = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
IF w_diff <= '7'.
wa_temp_fondo-zzpono = wa_output1-object_id.
APPEND wa_temp_fondo TO it_temp_fondo.
ENDIF.
ENDLOOP.
*select the final entries for PO whose FONDO is expiring
DESCRIBE TABLE it_temp_fondo LINES w_lines.
w_count = 1.
DO.
IF w_count LE w_lines.
READ TABLE it_temp_fondo INTO wa_temp_fondo INDEX w_count.
IF sy-subrc = 0.
CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
EXPORTING
i_object_id = wa_temp_fondo-zzpono
IMPORTING
e_header = wa_header1.
wa_fondo-zzpono = wa_temp_fondo-zzpono.
wa_fondo-zzpodesc = wa_header1-description.
wa_fondo-zzpodate = wa_header1-posting_date.
wa_fondo-zzexpdate = wa_header1-zzfondo_dat.
wa_fondo-zzpoval = wa_header1-total_value.
wa_fondo-zzpocur = wa_header1-currency.
wa_fondo-zzpocreator = wa_header1-created_by.
CLEAR : wa_address.
REFRESH wa_return.
CALL FUNCTION 'BAPI_USER_GET_DETAIL'
EXPORTING
username = wa_header1-created_by
IMPORTING
address = wa_address
TABLES
return = wa_return.
CLEAR wa_fondo-zzpocreator.
CONCATENATE wa_address-firstname ' ' wa_address-lastname INTO wa_fondo-zzpocreator .
w_count = w_count + 1.
APPEND wa_fondo TO it_fondo.
ENDIF.
ELSE.
EXIT.
ENDIF.
ENDDO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_structure_name = 'ZSR_FONDO'
i_grid_title = 'EXPIRING FONDOS'
TABLES
t_outtab = it_fondo[]
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
ENDIF.
ENDFORM. " DISPLAY_EXPIRING_FONDOS
Now in my ALV grid o/p i can see the check box but if i select one row and then try to select another the first one gets deselected.
Can anybody tell me what is missing?Hi,
Try like changing this
insted of
g_layout-f2code = ' '.
use this
g_layout-f2code = 'DISP'. " Sets fcode for when double
and
g_layout-f2code = '&ETA'. " it will display POPUP screen
Best Regards
Ranga
Edited by: Ranga Swamy on Nov 1, 2008 11:07 PM
Edited by: Ranga Swamy on Nov 1, 2008 11:17 PM -
Check box in ALV grid gets unselected for new selection
Hi all,
This is my code :
TYPE-POOLS : slis.
Variable
DATA: g_repid LIKE sy-repid,
g_title TYPE lvc_title,
g_set_pf_stat TYPE slis_formname VALUE 'SET_PF_STATUS',
g_user_command TYPE slis_formname VALUE 'USER_COMMAND',
g_layout TYPE slis_layout_alv,
g_print_alv TYPE slis_print_alv,
g_variant LIKE disvariant,
c_char_a(1) VALUE 'A',
c_char_x(1) VALUE 'X',
itab_alv_sort TYPE slis_t_sortinfo_alv,
itab_alv_fcat TYPE slis_t_fieldcat_alv,
fm_name type rs38l_fnam," Function Module Name
* l_sfctrlparams LIKE ssfctrlop, " Form Print Parameter
* l_sfoutopt LIKE ssfcompop,
pri_params LIKE pri_params,
c_x type c .
* Internal tables Begin with IT_ *
DATA : it_fcat TYPE SLIS_T_FIELDCAT_ALV, "---ALV
it_disp type table of ZLOI.
* Work Area for Internal tables Begin with WA_ *
data : wa_fcat TYPE slis_fieldcat_alv , "---ALV
wa_layout TYPE lvc_s_layo, "---ALV
wa_it_disp like line of it_disp.
* Objects *
DATA : cref TYPE REF TO cl_gui_custom_container, "---ALV
gref TYPE REF TO cl_gui_alv_grid. "---ALV
* Start-of-selection
Start-of-selection.
perform fetch_po_det.
perform build_fcat.
perform alv_display.
*& Form FETCH_PO_DET
* text
* --> p1 text
* <-- p2 text
FORM FETCH_PO_DET .
data : it_po type table of crmd_orderadm_h,
wa_po like line of it_po,
wa_header type BBP_PDS_PO_HEADER_D.
select guid
object_id
DESCRIPTION
POSTING_DATE
CREATED_BY
from crmd_orderadm_h
into corresponding fields of table it_po
where object_type = 'BUS2201'.
loop at it_po into wa_po.
move wa_po-object_id to wa_it_disp-ZZPONO.
move wa_po-DESCRIPTION to wa_it_disp-ZZPODESC.
move wa_po-posting_date to wa_it_disp-ZZPODATE.
move wa_po-created_by to wa_it_disp-ZZPOCREATOR.
CALL FUNCTION 'BBP_PD_PO_GETDETAIL'
EXPORTING
I_OBJECT_ID = wa_it_disp-zzpono
IMPORTING
E_HEADER = wa_header.
move wa_header-total_value to wa_it_disp-ZZPOVAL.
move wa_header-currency to wa_it_disp-ZZPOCUR.
append wa_it_disp to it_disp.
endloop.
* write : wa_it_disp-zzpono.
ENDFORM. " FETCH_PO_DET
*& Form BUILD_FCAT
* text
* --> p1 text
* <-- p2 text
FORM BUILD_FCAT .
g_repid = sy-repid.
g_title = 'LOI details'.
g_print_alv-no_print_listinfos = 'X'.
g_variant-report = sy-repid.
g_variant-variant = sy-title.
CLEAR g_layout.
g_layout-f2code = ' '.
wa_layout-zebra = 'X'.
g_layout-flexible_key = 'X'.
g_layout-colwidth_optimize = 'X'.
g_layout-detail_initial_lines = 'X'.
g_layout-box_fieldname = 'ZZCHECK'.
*g_layout-box_tabname = 'ITAB_REPORT'.
*Check box
wa_fcat-fieldname = 'ZZCHECK'.
wa_fcat-checkbox = 'X'.
wa_fcat-outputlen = '1'.
wa_fcat-col_pos = '1'.
wa_fcat-edit = '1'.
wa_fcat-seltext_m = 'No'.
append wa_fcat to it_fcat.
*Po no
clear wa_fcat.
wa_fcat-fieldname = 'ZZPONO' .
wa_fcat-tabname = 'IT_DISP'.
* wa_fcat-seltext = 'Purchase Order'.
wa_fcat-seltext_m = 'Purchase Order'.
*wa_fcat-seltext_s = 'Purchase Order.
wa_fcat-icon = 'X'.
wa_fcat-col_pos = '2'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Desc
wa_fcat-fieldname = 'ZZPODESC' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Description'.
wa_fcat-seltext_m = 'Description'.
*wa_fcat-seltext_s = 'Description'.
wa_fcat-col_pos = '3'.
wa_fcat-outputlen = 10.
append wa_fcat to it_fcat.
*Postign date
wa_fcat-fieldname = 'ZZPODATE' .
wa_fcat-tabname = 'IT_DISP'.
wa_fcat-seltext_l = 'Posting Date'.
wa_fcat-seltext_m = 'Posting Date'.
*wa_fcat-seltext_s = 'Posting Date'.
wa_fcat-col_pos = '4'.
wa_fcat-outputlen = 8.
append wa_fcat to it_fcat.
*value
wa_fcat-fieldname = 'ZZPOVAL' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO value'.
wa_fcat-seltext_m = 'PO value'.
*wa_fcat-seltext_s = 'PO value'.
wa_fcat-col_pos = '5'.
wa_fcat-outputlen = 15.
append wa_fcat to it_fcat.
*Currency
wa_fcat-fieldname = 'ZZPOCUR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'PO Currency'.
wa_fcat-seltext_m = 'PO Currency'.
*wa_fcat-seltext_s = 'PO Currency'.
wa_fcat-col_pos = '6'.
wa_fcat-outputlen = 5.
append wa_fcat to it_fcat.
*Creator
wa_fcat-fieldname = 'ZZPOCREATOR' .
wa_fcat-tabname = 'IT_DISP'.
*wa_fcat-seltext_l = 'Buyer'.
wa_fcat-seltext_m = 'Buyer'.
*wa_fcat-seltext_s = 'Buyer'.
wa_fcat-col_pos = '7'.
wa_fcat-outputlen = 12.
append wa_fcat to it_fcat.
ENDFORM. " BUILD_FCAT
*& Form ALV_DISPLAY
* text
* --> p1 text
* <-- p2 text
FORM ALV_DISPLAY .
sort it_disp by ZZPONO.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
* I_INTERFACE_CHECK = ' '
* I_BYPASSING_BUFFER = ' '
* I_BUFFER_ACTIVE = ' '
I_CALLBACK_PROGRAM = g_repid
I_CALLBACK_PF_STATUS_SET = g_set_pf_stat
I_CALLBACK_USER_COMMAND = g_user_command
* I_CALLBACK_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_TOP_OF_PAGE = ' '
* I_CALLBACK_HTML_END_OF_LIST = ' '
* I_STRUCTURE_NAME =
* I_BACKGROUND_ID = ' '
I_GRID_TITLE = g_title
* I_GRID_SETTINGS =
IS_LAYOUT = g_layout
IT_FIELDCAT = it_fcat[]
* IT_EXCLUDING =
* IT_SPECIAL_GROUPS =
* IT_SORT =
* IT_FILTER =
* IS_SEL_HIDE =
* I_DEFAULT = 'X'
* I_SAVE = ' '
IS_VARIANT = g_variant
* IT_EVENTS =
* IT_EVENT_EXIT =
IS_PRINT = g_print_alv
* IS_REPREP_ID =
* I_SCREEN_START_COLUMN = 0
* I_SCREEN_START_LINE = 0
* I_SCREEN_END_COLUMN = 0
* I_SCREEN_END_LINE = 0
* I_HTML_HEIGHT_TOP = 0
* I_HTML_HEIGHT_END = 0
* IT_ALV_GRAPHICS =
* IT_HYPERLINK =
* IT_ADD_FIELDCAT =
* IT_EXCEPT_QINFO =
* IR_SALV_FULLSCREEN_ADAPTER =
* IMPORTING
* E_EXIT_CAUSED_BY_CALLER =
* ES_EXIT_CAUSED_BY_USER =
TABLES
T_OUTTAB = it_disp[]
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2
IF SY-SUBRC <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM. " ALV_DISPLAY
*& Form user_command
* text
* -->R_UCOMM text
* -->RS_SELFIELD text
FORM user_command USING r_ucomm LIKE sy-ucomm
rs_selfield TYPE slis_selfield. "#EC CALLED
CASE R_UCOMM.
WHEN 'PRINT'.
READ TABLE IT_disp INTO WA_IT_DISP WITH KEY ZZCHECK = 'X'.
IF SY-SUBRC EQ 0.
loop at it_DISP INTO WA_IT_DISP.
CALL FUNCTION 'POPUP_TO_CONFIRM'
EXPORTING
TEXT_QUESTION = 'Print the LOI details?'
TEXT_BUTTON_1 = 'Yes'
TEXT_BUTTON_2 = 'No'.
* IMPORTING
* ANSWER = w_answer.
IF SY-SUBRC 0.
ENDIF.
* PERFORM CALL_SF.
endloop.
ENDIF.
WHEN 'BACK'.
LEAVE PROGRAM.
WHEN 'EXIT'.
LEAVE PROGRAM.
WHEN 'CANCEL'.
LEAVE PROGRAM.
ENDCASE.
rs_selfield-refresh = 'X'.
ENDFORM. "user_command
*& Form set_pf_status
* text
* -->RT_EXTAB text
FORM set_pf_status USING rt_extab TYPE slis_t_extab.
SET PF-STATUS 'ZSTANDARD' EXCLUDING rt_extab.
SET TITLEBAR sy-tcode.
ENDFORM. "set_pf_status
Now in my ALV grid o/p i can see the check box but if i select one row and then try to slect another the first one gets deselected.
Can anybody tell me what is missing?Hi,
if you need just a check box for each line, try to get rid of this line from your layout.
g_layout-box_fieldname = 'ZZCHECK'.
SAP uses this field to store info about selected lines. Hence you click on the second check box, you select different line and the first line is erased. You can select more line by holding SHIFT + CTRL
Cheers -
Double click on list field in ALV grid control
Hello all,
I developed a report with a ALV grid control. I would like to move some functionality from marking a line and pressing a button in the status line to double clicking a specific field in the output list and execute a command there (i.e. double click on PO number and go to PO display TAC then). Can anybody provide some example coding for that?
Thanks so much for your help!
TorstenHere is your sample program. Copy this code into a z program. Create the screen 100 with a container in it and name it "ALV_CONTAINER". Create the gui-status with "BACK".
report zrich_0001.
tables: ekko.
data: begin of i_alv occurs 0,
ebeln type ekko-ebeln,
end of i_alv.
* CLASS cl_event_receiver DEFINITION Handles Double Click
class cl_event_receiver definition.
public section.
methods handle_double_click
for event double_click of cl_gui_alv_grid
importing e_row e_column.
private section.
endclass.
* CLASS CL_EVENT_RECEIVER IMPLEMENTATION Handles Double Click
class cl_event_receiver implementation.
method handle_double_click.
perform drill_down using e_row-index.
endmethod.
endclass.
data: alv_container type ref to cl_gui_custom_container.
data: event_receiver type ref to cl_event_receiver.
data: alv_grid type ref to cl_gui_alv_grid.
data: layout type lvc_s_layo.
data: fieldcat type lvc_t_fcat.
selection-screen begin of block b1 with frame title text-001 .
select-options: s_ebeln for ekko-ebeln.
selection-screen end of block b1.
start-of-selection.
perform get_data.
call screen 100.
* Module status_0100 OUTPUT
module status_0100 output.
set pf-status '0100'.
set titlebar '0100'.
data: variant type disvariant.
variant-report = sy-repid.
variant-username = sy-uname.
* Create Controls
create object alv_container
exporting
container_name = 'ALV_CONTAINER'.
create object alv_grid
exporting
i_parent = alv_container.
* Create Event Receiver
create object event_receiver.
* Populate Field Catalog
perform get_fieldcatalog.
call method alv_grid->set_table_for_first_display
exporting
is_layout = layout
is_variant = variant
i_save = 'U'
i_structure_name = 'I_ALV'
changing
it_outtab = i_alv[]
it_fieldcatalog = fieldcat[].
* handler for ALV grid
set handler event_receiver->handle_double_click for alv_grid.
endmodule.
* Module USER_COMMAND_0100 INPUT
module user_command_0100 input.
case sy-ucomm.
when 'BACK' or 'CANC'.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
if sy-subrc = 0.
set screen 0.
leave screen.
else.
leave program.
endif.
when 'EXIT'.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
leave program.
endcase.
endmodule.
* FORM GET_DATA
form get_data.
select * into corresponding fields of table i_alv
from ekko
where ebeln in s_ebeln.
sort i_alv ascending by ebeln.
endform.
* Form Get_Fieldcatalog - Set Up Columns/Headers
form get_fieldcatalog.
data: ls_fcat type lvc_s_fcat.
refresh: fieldcat.
clear: ls_fcat.
ls_fcat-reptext = 'PO Number'.
ls_fcat-coltext = 'PO Number'.
ls_fcat-fieldname = 'EBELN'.
ls_fcat-ref_table = 'I_ALV'.
ls_fcat-outputlen = '12'.
ls_fcat-col_pos = 1.
append ls_fcat to fieldcat.
endform.
* DRILL_DOWN
form drill_down using index.
read table i_alv index index.
if sy-subrc = 0.
set parameter id 'BES' field i_alv-ebeln.
call transaction 'ME23' and skip first screen.
if not alv_container is initial.
call method alv_container->free.
clear: alv_container.
free : alv_container.
endif.
endif.
endform.
Regards,
Rich Heilman -
ALV GRID Report is not showing all records which is in internal table
hi all,
have one doubt. please clarify me. ALV Report is working fine since long tiem. But suddenly this report is showing few records only for the given input. Example: it_main table have 50 records, but output is showing only 10 records only. (we have not made any modifications in this report).
temporarily i have given excel output file from it_main table. excel file is showing all records.
here it_main have all the records. but output is showing few records only. it is not showing any error. i have tested with REUSE_ALV_LIST_DISPLAY function also. but it also showing same results(few records only.)
please give me some idea.
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
is_layout = wa_layout
it_fieldcat = it_fcat
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
Best Regards,
Srinivashi
Please study this program and give me suggestions.
ALV Declaration
DATA : it_events TYPE slis_t_event, "ALV event
it_fcat TYPE slis_t_fieldcat_alv, "Field catalog
it_list_top_of_page TYPE slis_t_listheader,
c_tabname TYPE slis_tabname VALUE 'IT_MAIN'.
DATA : wa_layout TYPE slis_layout_alv,
wa_event TYPE slis_alv_event,
wa_fcat TYPE slis_fieldcat_alv,
wa_variant TYPE disvariant.
START-OF-SELECTION.
PERFORM material_pass.
PERFORM data_retrieval.
END-OF-SELECTION.
PERFORM sub_display_report.
FORM sub_display_report .
DATA status(1).
IF r1 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'SIZE2' 'SIZE2' '' '10' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mains
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ELSEIF r2 = 'X' OR r3 = 'X'.
PERFORM build_fieldcatalog USING :
'1' 'ERDAT' 'S.O DATE' '' '10' 'X',
'2' 'VBELN' 'SALE ORDER' '' '10' 'X',
'3' 'POSNR' 'SALE ITEM' '' '6' '',
'4' 'BSTKD' 'CUSTOMER PO' '' '35' '',
'5' 'BEZEI' 'REASON FOR REJECTION' '' '40' '',
'6' 'PLNUM' 'PLANNED ORDER' '' '10' '',
'7' 'AUFNR' 'PROD.ORDER.' '' '12' '',
'8' 'MATNR' 'MATERIAL NUMBER' '' '18' '',
'9' 'MAKTX' 'MATERIAL DESCRIPTION' '' '40' '',
'10' 'WERKS' 'PLANT' '' '4' '',
'11' 'KWMENG' 'SALE ORDER QTY' '' '15' '',
'12' 'VRKME' 'UNIT' '' '4' '',
'13' 'GAMNG' 'PROD.ORDER QTY' '' '13' '',
'14' 'IGMNG' 'CONFIRMED ORDER QTY' '' '13' '',
'15' 'GMEIN' 'UNIT' '' '4' '',
'16' 'MENGE' 'G.R QUANTITY' '' '13' '',
'17' 'SOBAL' 'S.O BALANCE' '' '13' '',
'18' 'PRDBAL' 'PROD.BALANCE' '' '13' '',
'19' 'GSM' 'GSM' '' '4' '',
'20' 'SIZE1' 'SIZE1' '' '10' '',
'21' 'CUT1' 'CUT1' '' '11' '',
'22' 'SIZE2' 'SIZE2' '' '10' '',
'23' 'CUT2' 'CUT2' '' '11' '',
'24' 'SIZE3' 'SIZE3' '' '10' '',
'25' 'CUT3' 'CUT3' '' '11' '',
'26' 'SIZE4' 'SIZE4' '' '10' '',
'27' 'CUT4' 'CUT4' '' '11' '',
'28' 'SIZE5' 'SIZE5' '' '10' '',
'29' 'CUT5' 'CUT5' '' '11' '',
'30' 'SIZE6' 'SIZE6' '' '10' '',
'31' 'CUT6' 'CUT6' '' '11' ''.
CALL FUNCTION 'GUI_DOWNLOAD'
EXPORTING
filename = pathname
filetype = ftype
append = 'X'
write_field_separator = 'X'
TABLES
data_tab = it_mainall
EXCEPTIONS
file_write_error = 1.
IF sy-subrc = 0.
status = 'S'.
ELSE.
status = 'E'.
ENDIF.
ENDIF.
PERFORM build_layout.
PERFORM build_events.
PERFORM sub_comment_build USING it_list_top_of_page.
PERFORM sub_set_variant.
PERFORM display_alv_report.
IF status = 'S'.
MESSAGE 'Excel Output file Downloaded to Given Path' TYPE 'I'.
ELSE.
MESSAGE 'Download Not Possible' TYPE 'I'.
ENDIF.
ENDFORM. " SUB_DISPLAY_REPORT
FORM BUILD_FIELDCATALOG
FORM build_fieldcatalog USING p_col_pos
p_fieldname
p_text
p_datatype
p_outputlen
p_col_freez.
wa_fcat-row_pos = '1'.
wa_fcat-col_pos = p_col_pos.
wa_fcat-fieldname = p_fieldname.
wa_fcat-tabname = c_tabname.
wa_fcat-reptext_ddic = p_text.
wa_fcat-datatype = p_datatype.
wa_fcat-ddic_outputlen = p_outputlen.
wa_fcat-key = p_col_freez.
APPEND wa_fcat TO it_fcat.
CLEAR wa_fcat.
ENDFORM. " BUILD_FIELDCATALOG
*& Form BUILD_LAYOUT
FORM build_layout.
CLEAR: wa_layout.
wa_layout-window_titlebar = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_layout-colwidth_optimize = 'X'.
wa_layout-totals_text = 'CUMULATIVE'.
ENDFORM. "BUILD_LAYOUT
*& Form BUILD_EVENTS
FORM build_events.
CLEAR wa_event.
REFRESH it_events.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
i_list_type = 0
IMPORTING
et_events = it_events
EXCEPTIONS
list_type_wrong = 1
OTHERS = 2.
IF sy-subrc = 0.
READ TABLE it_events INTO wa_event
WITH KEY name = 'TOP_OF_PAGE'.
IF sy-subrc EQ 0.
wa_event-form = 'TOP_OF_PAGE'.
APPEND wa_event TO it_events.
CLEAR wa_event.
ENDIF.
ENDIF.
ENDFORM. "BUILD_EVENTS
-->P_IT_LIST_TOP_OF_PAGE text
FORM sub_comment_build USING it_top_of_page TYPE slis_t_listheader.
DATA ls_line TYPE slis_listheader.
CLEAR ls_line.
ls_line-typ = 'H'.
ls_line-info = str1.
APPEND ls_line TO it_top_of_page.
CLEAR ls_line.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. " SUB_COMMENT_BUILD
*& Form SUB_SET_VARIANT
text
--> p1 text
<-- p2 text
FORM sub_set_variant .
CLEAR wa_variant.
wa_variant-report = sy-repid.
wa_variant-username = sy-uname.
wa_variant-variant = c_variant.
wa_variant-variant = p_layout.
ENDFORM. " SUB_SET_VARIANT
*& Form DISPLAY_ALV_REPORT
*Display Report Using ALV GRID
FORM display_alv_report.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_buffer_active = 'X'
i_callback_program = sy-repid
i_callback_pf_status_set = c_pf_status
i_callback_user_command = c_user_command
is_layout = wa_layout
it_fieldcat = it_fcat
it_sort = it_sort[]
it_events = it_events
i_save = 'A'
is_variant = wa_variant
TABLES
t_outtab = it_main
EXCEPTIONS
program_error = 1
OTHERS = 2.
IF sy-subrc <> 0.
MESSAGE text-204 " 'Error in Display the list'
TYPE 'I'.
LEAVE TO LIST-PROCESSING.
ENDIF.
ENDFORM. . "DISPLAY_ALV_REPORT
*ALV Report Header
FORM top_of_page.
DATA : t_header TYPE slis_t_listheader WITH HEADER LINE,
wa_header TYPE slis_listheader,
t_line LIKE wa_header-info,
ld_lines TYPE i,
ld_linesc(10) TYPE c.
wa_header-typ = 'H'.
T_HEADER-INFO = 'LIST OF GSM WISE OPEN SALE ORDERS'.
wa_header-info = str1.
APPEND wa_header TO t_header.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
it_list_commentary = t_header[].
ENDFORM. "TOP_OF_PAGE
here it_main internal table having all data. but output is showing few records only.
pl. give some idea.
Thanks & Regards
Srinivas.
Maybe you are looking for
-
How do I copy files from my old pc to my new imac?
how do I copy files from my old pc to my new imac?
-
It has been working all day long, when suddenly my email told me I wasn't connected to the internet even though I had a solid connection. I tried forgetting the network and re-logging in and it didn't work. I tried restarting the router even though m
-
Editing photo properties manually
Can someone tell me how to override the automatic date and time stamps on photos? I have a series of pics I need to edit manually. Message Edited by mookiemike on 10-11-2008 01:09 AM Message Edited by mookiemike on 10-11-2008 01:10 AM Message Edited
-
Hello All, Currently we are using Hit JDBC as a middleware between weblogic server and AS400. We have recently encounter the following error message: "[PREPDESC] ADRB0110 in type *N not found" This error message appears once in a while when we were t
-
Files not visible after Time Machine restoring
Hi, I've had some problems with my Mac and decided to format the hard drive. After the formatting I tried to restore some of the older folders from the Time Machine backup disk. The program copied them onto the harddrive without any problems and when