What configuration of the new macbook pro do I need to run FCS 3 without choppy playback.

Yep, just wondering what configuration of the new macbook pro do I need to run FCS 3 without choppy playback or lagging.  I'm thinking about the 7200rpm, 2.2ghz, antiglare, 4gb ram, with 1gb GPU graphics card configuration

Nothing wrong with the computer. Playback is dependent on the media and the drives.

Similar Messages

  • What is the exact name of the cable I need to connect my old hard drive from my macbook pro (it has been taken out of the computer) to my new macbook pro?  I need to transfer files from the old hard drive to the new computer.

    What is the exact name of the cable I need to connect my old hard drive from my macbook pro, which has been removed from the computer, to my new macbook pro?  I need to transfere files from the old hard drive to the new computer.

    No eSATA to USB. Just a SATA/IDE to USB adapter. Google SATA/IDE to USB adapter and you will get tons of links to buy them. Most likely your local computer electronics store has them, although they might be more expensive buying locally than online.
    I have several. You can get either USB 2, which what I recommend, or USB 3. USB is backward compatible so a USB 3 adapter will work on a USB 2 port and a USB 2 adapter will work on a USB 3 port. Backward compatible in both directions.
    I suggest a USB 2 type because there have been some problems with certain USB 3 devices, the USB 3 interface used isn't all that good in those certain devices. USB 3 is still fairly new where as USB 2 has been around for over 10 years.
    synghem wrote:
    Thank you LowLuster,
    At the apple store they said I needed an esata to usb wire.  But looking at wires on line has been confusing.  Is sata the same as esata?  How do I know if I need a usb 3 or usb 2?

  • At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    At the Apple WWDC 2012 when they announced the new MacBook Pro, the used something to rotate it. What was it?

    Hello Sam,
    strangely enough, it went away by itself, and until now, it did not come back. I also believe it must be soms sort of graphic card connection failure or something like that, it`s very strange though. I also did let it know to the apple store, and explained it, and they were willing to repair it, but now everything is ok, so it has no meaning to go to the apple store, maybe for a checkup, that would be interesting maybe.
    So, I would suggest to keep on using your computer for a couple of days, and shut it down and restart it as often as possible. And when it has not dissapeared after 3 or 4 days, then it`s good I think to go to the apple store.
    If you can post here how it goes or how it went, would be nice, and if there is anything more I can help you with, let me know, kindly, Steven

  • My husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    my husband has 1 of the newer macbook pros  that runs off of lion and know his computer wont let him get past the starting screen it keeps telling him to put in a bootible disk he cant use his key board or anything what should he do?

    Hi...
    Use Lion Recovery to repair the startup disk if necessary, or reinstall the Mac OS X.
    he cant use his key board
    You'll need to use a wired (USB) keyboard.

  • What cases are good for the new macbook pro retina display 15"

    What folio cases are out there that don't damage the new macbook pro retina display 15" I keep looking but can't find any, they all seem to have serious negative reviews

    be specific,  hard case or CARRY CASE?
    hard cases are not recommended, trap in dust and junk and trap heat
    A great carry case, and best made for the money are those made by INCASE as seen in Apple stores and amazon.com

  • What cable do I need in order to migrate from Macbook Pro (December 2008) to the new Macbook Pro with Retina display?

    It's driving me crazy; I have a firewire, but it isn't compatible with the ports on the new macbook pro with retina display.
    Thanks for your help!

    hanskra wrote:
    I wish to know from Apple,
    These are user-to-user forums where everyday folk post "technical" questions and offer answers to each other voluntarily.  No one here works for Apple nor does Apple get involved in responding. 
    You can either contact Apple Care since you are still under warranty or click on the "Contact Us" link at the bottom of this website. 

  • Hello! i'd like to know what is the difference between the new macbook pro retina 13" 2,6 Ghz and the 2,5ghz?

    hi everyone!
    is there a big differnce between the new macbook pro retina 13"  2,6 ghz and the 2,5 ghz?
    or only the ghz?
    many thanks
    romain

    Flash Storage
    2.5 GHz   128 GB Flash Storage
    2.6 GHz   256 GB Flash Storage
    http://store.apple.com/us/browse/home/shop_mac/family/macbook_pro

  • How do I install software from a disc on to the new Macbook Pro?

    I recently purchased the new Macbook Pro Retina Display, which I love.  But just went to install my Photoshop CS5 and realised there's no disc option.  What do I do?

    Buy ANY External DVD drive that connect to a USB port. Like this one.
    http://www.newegg.com/Product/Product.aspx?Item=N82E16827135256&nm_mc=TEMC-RMA-A pprovel&cm_mmc=TEMC-RMA-Approvel-_-Content-_-text-_-
    You do not need the expensve Apple Superdrive.

  • I have the new macbook pro from late 2011. when i try plugging my cannon gl2 into the mac via firewire 800 it does not show up in iMovie as an option to import from. i even have gone into my settings on the camera and changed it to vcr.

    I have the new MacBook Pro from late 2011. "the one before the new ritina display" i have a cannon gl2 video camera which is mini dv. when i plug it into my mac via firwire 800 it does not show up in the iMovie. i have set the settings on the camera to vcr mode and changed it to av->dv out. when i click on the import from camera on imovie it doesnt even show my camera in it. it just gives me the option to import video from my facetime camera. the camera is turned on the wires are connected i know for fact that its a firewire and not a usb. i know what they each look like. i bought the firewire cable and it was marked down cause it was an opened and used item. would it be possible that it could be deffected and if that is not the reason what other options do i have?

    I would say that odds are high that you have a bad cable. Maybe that is why they returned it.
    I would suggest trying a different firewire cable.
    You can find Firewire cables inexpensively at monoprice.com. You need a 4 pin to 9 pin firewire cable.
    Here is a link.
    http://www.monoprice.com/products/subdepartment.asp?c_id=102&cp_id=10301
    Other things to check:
    Is your camera plugged in to wall power (not to batteries only). Must be hooked to an AC power source to import.

  • Can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    can i use my ext hard drive USB 2 on the the new macbook pro laptops with a USB3

    stephan ach wrote:
    but i read that there are lots of problems with the new macbook pro. i  have all my data on ext. la cie hard drive. i wont have a problem reading them?
    What problems specifically? If you have a problem you should start your own thread and explain the problem in detail.
    External USB devices including hard drives and DVD work fine on the new Macbook Pros.

  • Can I upgrade to the new MacBook Pro from PowerBook copying the hard disk?

    I have a Power Book G4 17", now I'm going to buy a new MacBook pro 17" and want to transfer the same software (I mean the whole content of my actual HD) to the new MacBook Pro using SuperDuper!
    I want to know if the Intel based MacBook Pro can run the same operating system configured in the PowerBook or I must install first the Mac OSX on the new MacBook pro and then reinstalla manually all the applications/documents?
    Marcello
    PowerBook G4 17"   Mac OS X (10.4.8)  
    PowerBook G4 17"   Mac OS X (10.4.8)  

    Hi Marcello,
    first of all: WELCOME TO THE DISCUSSIONS!
    No to both of your questions:
    No, you cannot clone the PPC hard disk to a new Intel disk. The systems are completely different.
    No, you don't have to reinstall all your software manually.
    You have to install Tiger from the install DVD that shipped with that MacBook Pro. You CANNOT use any other install disk, so take care you don't damage it! Once this is done you can transfer all your data, applications and settings from the old computer using the migration assistant in /Applications/Utilities.
    Be aware that there might be problems with applications that are not universal binaries and require Rosetta emulation: Intel-based Mac: Some migrated applications may need to be updated.
    If this answered your question please consider granting some stars: Why reward points?

  • Is there a way to setup your Xbox 360 to the new MacBook Pro

    I was just wondering if there was a way to setup your XBOX 360 to the new MacBook Pro? If you could give a simple answer that is simple to understand that would be great. My Xbox is connected using an HDMI but I also have a component cable.

    There is no cable that would do what you want. MacBook Pro computers do not have video inputs.

  • Can I use my old Macbook Pro Ram in the New Macbook Pro (late 2008)

    I have 2, 2 gig DDR2 sticks of ram in my macbook pro. I wanted to know if they would work in the new macbook pro (late 2008)? I know the new one uses DDR3 - What would be the downside of using DDR2 in a DDR3 macbook? Would the graphics cards work to their potential? Thanks!

    No. The DDR2 RAM in your older computer is not the same as the DDR3 RAM used in the new ones. There are significant differences between them not the least of which is pin count.

  • Can I turn off the retina display feature on the new MacBook Pro?

    Hello,
    I recently got the new MacBook Pro with Retina display. I love how fast this machine performs, it's weight and thickness.
    However, working in Advertisement, this machine's made my line of work a bit too pixelated. There are no websites optimized for this new display, making portfolios hard to see as the retina screen makes things blurry and fussy looking. Not only that, but non of the Adobe products are ready for this technology either. It's hard to open a piece of software you'd like to design with and work with pixelated tools (photoshop among others).
    I can do without the Ethernet port, optical drive and the lack of a locking system for this machine. But, making things uglier on the web isn't something I'm willing to sacrifice since is my line of work. Any idea of a third party that can turn this feature off?
    Any help would be greatly appreciated. Otherwise, this beauty is going back to the Apple store.

    sorry, but the 2880x1800 is hardware; in fact what makes non-optimized sites look (relativly) ugly is that to upscale the graphics to the apparent resolution of everything else each pixel is represented by 4 pixels, and as you know being in graphics, upscaling pictures is generally results in ugly. 
    Back to my point, there's no software to make the display lose 75% of its pixels; you'll either have to use another machine and/or wait for sites to optomize their graphics for the retina displays...which may or may never happen depending on the sites awareness/closeness with Apple's technology

  • 7200 rpm vs. 5400 rpm for the new MacBook Pro?

    Hi there,
    I'm ready to buy one of the new MacBook Pros. I was going to go for the 15" 2.0 GH. There's one thing that's difficult to decide. Should I go for the 7200 rpm HD upgrade?
    In principle it would seem that the default 5400 rpm HD would act as a bottleneck for the new and powerful CPUs. I heard some people say, though, that the 5400 rpm HDs are fast enough and that I would not notice any difference. Therefore, spending the extra money on a faster HD would be a waste.
    There is also the concern about battery life. Would a 7200 rpm HD reduce the battery time considerably vs. a 5400 HD?
    Since this would be my work computer, I would not want to sacrifice performance. So, if there is no significant difference in battery life and a considerable gain in performance, I would definitely go for the 7200 rpm option.
    What is your experience and/or opinion? I'm anxiously waiting for your response so that I can go ahead and enjoy the new Mac Book Pro.
    JM

    Thanks for your prompt response japamac. Interesting results. I wonder whether the results for performance, battery usage and temperature for the 7200 rpm that comes as an option in the Apple store would be similar to the ones you got for the 7200 rpm HD you used in your test.
    One question, since the difference is quite remarkable in the synthetic tests for "Media Center", I'm curious to know what real life applications would that relate to.
    Thanks again for your help.
    JM

Maybe you are looking for