When I select an email address from the dropdown menu and hit return, Thunderbird then fills in a different email address. Yosemite upgrade?

I just upgraded to OS X Yosemite and this new "feature" appeared. I often have several email addresses that contain the same set of characters. I just type the first few characters and then select the appropriate email address from the dropdown menu that appears. But if I hit return afterwards to enter another email address, the first address gets switched back automatically to the first one that appeared in the dropdown menu. The more characters I type, the more accurate it is, but it totally defeats the purpose of autofill if I have to type the entire email address! Anyone else having this problem? And can you guys please fix it? If you select something from the dropdown menu, it should stay selected.
Thanks!

This forum is filled with this same complaint. There is a bug reported on it. If and when they fix it is another question.
Version 24.6 works if you want to go back to a working version.

Similar Messages

  • When I type an address in the location bar and hit Enter nothing happens. I must click the arrow button at the end of the location bar. How do I fix it so that the Enter key works?

    When I type a web address in the location bar and hit enter nothing happens. In order to go to the website I've typed in, I must click the arrow button at the end of the location bar. How do I make it so that hitting the enter key takes me to the web page.
    == This happened ==
    Every time Firefox opened
    == Since Firefox 4 Beta installed an update

    The AVG addon seems to have caused the problem for me. I had it disabled and everything worked. Then I updated to AVG 2011 and the problem occurred. It seems to have reenabled itself after the update.
    Just disabling it solved the problem.

  • TS3297 itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same

    I just purchased itunes match and when I try to add my main computers music library I see "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again." but signing back in always results in the same error message. Somebody has to have an answer to this.

    Did you try setting itunes to run with administrator privileges? 
    Since I changed that I no longer have this issue

  • HT4914 When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    When I put suscribe it apears this message iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
    It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
    As it takes a good ten minuites for itunes
    If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
    Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
    I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

  • I have enabled homesharing in iTunes (from the advanced menu) and then used the same details when enabling homesharing on the Apple TV (settings computers), but I still can't stream my itunes to ATV.  Does anyone have suggestions to resolve?

    I have enabled homesharing in iTunes (from the advanced menu) and then used the same details when enabling homesharing on the Apple TV (settings > computers), but I still can't stream my itunes to ATV.  Does anyone have suggestions to resolve?

    I Am having the same issue. Ie on the password issue.
    I Am using a Macpro though.
    i Have had no issues with the setup until recently.
    However I think the hard drive is starting to fail as it keeps on losing the wireless connection and gas been stuttering a lot on playback.

  • How to get all the values from the dropdown menu

    How to get all the values from the dropdown menu
    I need to be able to extract all values from the dropdown menu; I know how to get all those values as a string, but I need to be able to access each item; (the value in a dropdown menu will change dynamically)
    How do I get number of item is selection dropdown?
    How do I extract a ?name? for each value, one by one?
    How do I change a selection by referring to particular index of the item in a dropdown menu?
    Here is the Path to dropdown menu that I'm trying to access (form contains number of similar dropdowns)
    RSWApp.om.GetElementByPath "window(index=0).form(id=""aspnetForm"" | action=""advancedsearch.aspx"" | index=0).formelement[SELECT](name=""ctl00$MainContent$hardwareBrand"" | id=""ctl00_MainContent_hardwareBrand"" | index=16)", element
    Message was edited by: testtest

    The findElement method allows various attributes to be used to search. Take the following two examples for the element below:
    <Select Name=ProdType ID=testProd>
    </Select>
    I can find the element based on its name or any other attribute, I just need to specify what I am looking for. To find it by name I would do the following:
    Set x = RSWApp.om.FindElement("ProdType","SELECT","Name")
    If I want to search by id I could do the following:
    Set x = RSWApp.om.FindElement("testProd","SELECT","ID")
    Usually you will use whatever is available. Since the select element has no name or ID on the Empirix home page, I used the onChange attribute. You can use any attribute as long as you specify which one you are using (last argument in these examples)
    You can use the FindElement to grab links, text boxes, etc.
    The next example grabs from a link on a page
    Home
    Set x = RSWApp.om.FindElement("Home","A","innerText")
    I hope this helps clear it up.

  • Every time I open a New File from the File Menu and I open it all of my desktop items are in it. What's up with that?

    Every time I open a New File from the File Menu and I open it all of my desktop items are in it. What's up with that?

    This is configured in Finder preferences under the General icon. You can make some changes to that behavior.

  • ITunes Match error: iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    I have just subscribed to iTunes Match, and get the above error message.  I have signed out and signed in several times, and still get the same message.  Can anyone help with a solution?

    I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
    It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
    As it takes a good ten minuites for itunes
    If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
    Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
    I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

  • ITunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again.

    Every few hours I receive this error message:
    "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
    Is there someone who knows how this could be solved?
    [Update]
    I see that there is already a discussion on this issue: https://discussions.apple.com/thread/3502994?start=0&tstart=0
    Message was edited by: mickniepoth

    I have Just upgraded my mac from Itunes 11.0 to itunes 11.02, this issue occured within hours of the updated.
    It seems to occur about every couple of hours for me, I can still access the apple store, but music match just dies with the message: "iTunes Match has encountered an error. Please choose Sign Out and then Sign In from the Store menu and try again."
    As it takes a good ten minuites for itunes
    If this is also occuring in Itunes 11, the previous Discussions are probably not relevant.
    Itunes 11 has had significant changes applied, so it would be reasoble to assume this is not the same fault and Apple have some how broken Itunes again.
    I might try to downgrade to itunes 11.0, as it looks like music match faults are not high on apples priorities, it looks like took them almost a year to fix this fault last time it occured.

  • How do I delete an email address from the dropdown that appears after I type the first letter of the recipiants address in the To: bar.

    When I open compose and type the first letter of the recipients address in the To: bar a dropdown appears with a listing of the email addresses I have sent messages to in the past as well as addresses of my contacts list.
    How do I delete an address from this dropdown?

    Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
    *Don't make any changes on the Safe mode start window.
    *https://support.mozilla.com/kb/Safe+Mode

  • I have a MacBook purchased in 2009 with Snow Leopard. I tried to access "special characters" from the Finder menu and an intermittent blank pop ups and will not stop. It also happens when I run Word or Pages.

    The blank pop up began as I tried to access "special characters" from the finder menu. I restarted, turned off and restarted and it did not work. It interferes with any application because I cannot work fast. Every new step takes a few seconds longer such as saving, finding text, check spelling and many more. I am desperate to solve this. Thanks in advance for any help given.
    Consuelo Corretjer

    Use the trackpad to scroll, thats what it was designed for. The scroll bars automatically disappear when not being used and will appear if you scroll up or down using the trackpad.
    This is a user-to-user forum and most people will post on here if they have problems. You very rarely get people posting to say there update went smooth. The fact is the vast majority of Mountain Lion users will not be experiencing any major problems with the OS, or maybe with apps which are not compatible, but thats hardly Apple's fault if developers don't update their apps.

  • When I try to bookmark a page the dropdown menu only shows 4 of my many bookmark folders.

    I have a heck of a lot of bookmark folders. These show up in the dropdown menu when I click on Bookmarks in the toolbar. However just today when I try to bookmark a web page, I only am given offered four folders in which to file the bookmark. Clicking on "choose" doesn't show any folders at all that I've created. Same thing when I open MF in safe mode with addons not enabled.
    If I click on "Bookmarks menu" in the bookmark window then click on the arrow to chose a file, I see an odd assortment of random bookmarks and files.
    To complicate matters, perhaps: This morning Firefox went crazy. Details don't matter now. I followed instructions in MF support and saved critical files. Then uninstalled and reinstalled a new copy of MF. Created a new profile and moved critical files into it.
    Am I missing a file? Is something corrupted? (How would I find it?) Why would MF not see my folders when asked to file a bookmark?
    Thanks

    Start Firefox in [[Safe Mode]] to check if one of the add-ons is causing the problem (switch to the DEFAULT theme: Tools > Add-ons > Themes).
    * Don't make any changes on the Safe mode start window.
    See:
    * [[Troubleshooting extensions and themes]]
    This can also be a problem with the file places.sqlite that stores the bookmarks and the history.
    * http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

  • How to make a report to display next 18 months of data with when user select a particular month from the filter in power pivot tabular model.

    Hi,
    i have a  dimension table  with month_key having values (201201,201202,201203.......202011,202012) and month name ( Jan 12, feb 12,......NOV 20, Dec 20)  and a fact  table with columns (month_key ,measure_types, Amount)
    My requirement is to create a power pivot report  in which when a user select a month from the filter, the report should display the (selected month+18 ) month's data against each type . when JAN 12 is selected ,the jan 2012 +18 = june 2013
    , month name should be populated with months till june 2013 only .
    i tried creating calculated column"END DATE " in the fact table with  dax expression to calculate the 18th monh from the current month  as below 
    month_key END DATE
    201201       201306    
    201202       201307      
    and thought of filtering the table with month key <= ENDDATE but it is not working as expected. could you please guide me on this ? Is there any time intelligence function that serve the purpose . Iam using  excel 2010
    ..hence could not do any calculation on the report side also. please suggest .
    Thanks in advance                                                                                                                                               

    Do you need to show the measure calculated for those 18 months as a total on 1 row, or do you need to select a single month and then display on row filters 18 distinct rows?
    The first is trivial as driezl has suggested.
    The second will require a second calendar table.
    I created this example workbook for a coworker who had a similar problem. You will have to use the disconnected table as your filter and pull your related table onto the rows.
    Finally, the easiest way to deal with the sort of date arithmetic you need to do is to restructure your date table to have a series of "Sequential" fields. These fields should be the number of units of time since the beginning of your calendar.
    For example, consider a calendar starting on January 1, 2010. For January - December 2010, [MonthSequential] = 1, 2, ..., 12. For January - December 2011, [MonthSequential] = 13, 14, ..., 24, and so on, incrementing by 1 for each sequential month in time.
    Assuming you have this set up in your date tables (one related to your model - DimDate - and one disconnected - DisconDimDate) your measure would look like this:
    18 Month Measure:=
    CALCULATE( [Measure]
    , FILTER( DimDate
    , DimDate[MonthSequential] >= MAX( DisconDimDate[MonthSequential] )
    && DimDate[MonthSequential] <= MAX( DisconDimDate[MonthSequential] ) + 18
    Please review this example along with the workbook I have linked above.

  • When i try download a file from the internet it looks like its downloading then when i go to open this file it opens up in the app text edit and says it cannot open i DOS mode? Can anyne help?

    when i try to download a file from the internet it starts to download but when its finished it opens up in the app "text edit" and it says this file cannot open in DOS mode.
    Can anyone help?

    It sounds like perhaps the file doesn't have an extension that the system recognizes. Is this all files, or just one specific one, and if so, which? What is the name (and extension, if it has one) of the downloaded file? What kind of file do you *expect* it to be? (PDF, or whatever). Renaming a file with the appropriate extension can often fix that kind of problem.
    Matt

  • Selecting Quicktime Export Conversion from the Export menu kills FCE.

    This used to work for me. Since upgrading to SL I've been experiencing the problem of FCE just quitting without an error on the screen when I select the export with quicktime conversion option. I've looked around and I was unable to locate anything that appears to be a solution. I thought I'd add that I found the following error message in the Console Log.
    11/15/09 5:01:09 PM [0x0-0xe20e2].com.apple.FinalCutExpress[2441] objc[2441]: Class ProMetadataQTMDStorage is implemented in both /Applications/Final Cut Express.app/Contents/MacOS/../Frameworks/MIO.framework/Versions/A/MIO and /Applications/Final Cut Express.app/Contents/MacOS/Plugins/QTM Reader.bundle/Contents/MacOS/QTM Reader. One of the two will be used. Which one is undefined.
    Any thoughts?

    Ian and Tom, thank you for your ideas. I'm reluctant to do a wipe and re-install as you can imagine. I use my computer for more than just the occasional FCE project and it would involve a lot of work. I just tried the removal of the preferences and FCE is still not working with the quicktime conversion yet. Export to Quicktime without conversion works fine. Hmmm... I have reinstalled FCE and updated to 4.0.1 but that didn't change anything. Perhaps I'll try uninstalling and reinstalling Quicktime 7 and see if that changes anything - though the error message seems to indicate some confusion in FCE and not quicktime.

Maybe you are looking for