Where to find 'Exempt' indicator for reporting using ad-hoc query?

I want to run report for a count of exempt and non-exempt employees using ad-hoc query with logical database PNPCE. We maintain the exempt/non-exempt flag on the job.
Thanks
Manish

To meet this exact same requirement at my company.  I added an additional table (T5U13) into the logical database. Within transaction SQ02, go to the field group Organizational Assignment, right-click on the field group.  Click Node Extras.  Click Create icon over on the right-hand side of the screen.  Type in the table name T5U13.  Use this select statement:
SELECT SINGLE * FROM T5U13              
  WHERE STELL                = P0001-STELL
    AND ENDDA                = P0001-ENDDA
Then add the fields into your field groups.  I also created a local field so I get the word "Exempt" or "Non-Exempt" in my queries instead of "1" or "2" because i can never remember which is which. 
Hope this helps!

Similar Messages

  • Does anyone know where to find printer profiles for Epson paper with MG6200 printer using Lightroom?

    Does anyone know where to find printer profiles for Epson paper with MG6200 printer for use in LightRoom5?

    Epsnm should provide recommended settings (I.e. Which Canon paper type to select). They may also have profiles on their site.
    John Hoffman
    Conway, NH
    1D Mark IV, Rebel T5i, Pixma PRO-100, MX472

  • How to read the indicator for arbitrary use (RKEPA - T550A)

    Hi Everyone,
    I would like to use (retrive data from) the "Indicator for arbitrary use" field (RKEPA) of the Daily Work Schedules screen (table T550A) in Time Evaluation. I checked the documentation for HRS?S, HRS1T and VARST but didn't find anything.
    Could someone help me ?
    Thanks in advance,
    Zakaria.

    I think you will have to write your own operation, Zakaria.
    Actually it's quite normal to write general parametric operations for retrieval of additional fields that SAP does not provide for.
    Good luck!
    Rodrigo

  • Finding suitable indices for a large collection

    Hello,
    I'm trying to find suitable indices for a large Xml collection.
    I'm using a indexed node container. I added a large Xml document (about 450 MB). The schema of the document is like this:
    <dbname>
    <tablename1>
    <row attribute1="attributevalue" attribut2="attributevalue" ... />
    <row attribute2="attributevalue" attribut2="attributevalue" ... />
    </tablename1>
    <tablename2>
    <row ......>
    </dbname>
    One table has got about 5 million entries. I'm not able to query this table, because my system runs out of memory (Windows begins to swap several gigabytes).
    Typical queries are : "all rows of a table" and "all rows of a table with attribute=value"
    I also tried using lazy queries, but it didn't get better.
    The following indices I already added:
    - edge-element-presence-none for dbname
    - edge-element-presence-none for each tablename
    - edge-element-presence-none for row
    - edge-attribute-equality-string for attributes I'm trying to query
    E.g. I'm trying to get all rows of a table. This is the query plan:
    dbxml> queryplan collection("temp.dbxml")/dbname/tablename1/row
    <XQuery>
    <DbXmlNav>
    <LookupIndex container="temp.dbxml">
    <PresenceQP index="edge-element-presence-none" operation="eq" parent="tablename1" child="row"/>
    </LookupIndex>
    <Join type="parent-of-child" return="context_item">
    <DbXmlNav>
    <LookupIndex container="temp.dbxml">
    <PresenceQP index="edge-element-presence-none" operation="eq" parent="dbname" child="tablename1"/>
    </LookupIndex>
    <Join type="parent-of-child" return="context_item">
    <DbXmlNav>
    <LookupIndex container="temp.dbxml">
    <PresenceQP index="edge-element-presence-none" operation="eq" parent="root:http://www.sleepycat.com/2002/dbxml" child="dbname"/>
    </LookupIndex>
    <Join type="parent-of-child" return="context_item">
    <QueryPlanFunction result="collection" container="temp.dbxml">
    <OQPlan>n(P(edge-element-presence-none,=,tablename1.row),P(edge-element-presence-none,=,dbname.tablename1),P(edge-element-presence-none,=,root:http://www.sleepycat.com/2002/dbxml.dbname))</OQPlan>
    </QueryPlanFunction>
    </Join>
    </DbXmlNav>
    </Join>
    </DbXmlNav>
    </Join>
    </DbXmlNav>
    </XQuery>
    When i execute this query (in eager mode), dbxml doesn't gives any response. The swap size is increased several gigabytes and the hard disk is working very hard. The same happens, when I use lazy mode and try to print out the results.
    Could anybody please help me to improve the query performance?
    Thanks,
    Benjamin

    Benjamin,
    Using lazy evaluation should allow you to get an answer. The upcoming 2.4 release is easier on memory as well and should help.
    That said, why are you even using an XML database if you are storing/querying what appears
    to be relational data? Mapping relational database tables into a single XML document is going on only slow down access (due to the constraints XML imposes on the data that do not exist in a
    relational system).
    If you must do such things it's best to map at a finer granularity -- e.g. one table to one document or even one row per document.
    Regards,
    George

  • Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive

    Where to find a driver for a seagate product or the operating system (OS) fails to recognize a seagate drive
    Name : Seagate Backup+ BL Media
              Type :           Disk
              Partition Map Scheme :           Master Boot Record
              Disk Identifier :           disk1
              Media Name :           Seagate Backup+ BL Media
              Media Type :           Generic
              Connection Bus :           USB
              USB Serial Number :           NA5B83S2
              Device Tree :           IODeviceTree:/PCI0@0/XHC1@14
              Writable :           Yes
              Ejectable :           Yes
              Location :           External
              Total Capacity :           1 TB (10,00,20,48,85,504 Bytes)
              Disk Number :           1
              Partition Number :           0
              S.M.A.R.T. Status :           Not Supported

    Seagate website.
    Why don't you reformat the drive in Disk Utility or Terminal. Screw that rubbish backup software on the seagate drive.

  • PA-US  Where to find the documentation for renumeration type?

    Gurus,
    Where to find the documentation for renumeration type details for IT0008 in SAP Library?
    I tried in HR sections under ERP of SAP Library, but could not find the place.
    Thanks,

    Revathi,
    I see an option to change the enum type in IT0008 maintenance screen.
    Which simply changes section of the screen as "salary" to "pay scale" and vice versa.
    I want to understand the difference between those in terms of payroll process (calculations).
    Hence, I was trying to find documentation in this regard in SAP Library.
    Thanks,

  • Where i find the drivers for hp j5783 scaner

    where i find the drivers for hp j5783 scaner

    Hello ezraie, and welcome to the HP Forums, I hope you enjoy your experience!
    I see you are looking for the drivers.  I would like to help.
    I would recommend following this link to the HP Officejet J5783 All-in-One Printer Drivers.
    Please let me know if you have any questions.  Thanks for posting on the HP Forums!
    Please click “Accept as Solution " if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos, Thumbs Up" on the right to say “Thanks" for helping!
    Jamieson
    I work on behalf of HP
    "Remember, I'm pulling for you, we're all in this together!" - Red Green.

  • New customized report using PLD or QUERY PRINT LAYOUT to show customers onl

    I am working with a Software Developing firm as an SAP Consultant.
    Please tell me how to create a new     customized     report displaying various details as required by the client in the report using PLD or Query Print Layout.
    Please help me asap.

    Hi,
    You can create queries using the Query Generator or the Query Wizard tools.
    After you have created your own queries, you can link them to a required print layout.
    for user reports.Look at:
    Tools --> Queries --> Query Print Layout
    Set there your query reports.
    Printing User-Defined Queries
    After you had linked a user-defined query to a user report template, you can now print it
    according to its linked print layout.
    There are two ways for printing your user-defined queries.
    1. Using the Query Print Layout window:
    • Select from the upper menu Tools &#1048774; Queries &#1048774; Query Print Layout.
    • Click the Reports tab page.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File &#1048774; Print.
    • The user-defined query is printed according to its linked print layout.
    2. Using the Queries Manager window:
    • Click the Queries Manager icon on the upper tool bar.
    • Click to highlight the required query you would like to print.
    • Click on the printer icon or select from the upper menu File &#1048774; Print.
    • The user-defined query is printed according to its linked print layout.
    Note! You can also print preview user-defined queries. Do so by selecting the Print
    Preview option as described in the methods above for printing your query.
    Btw, you could search the manual training files relate to query PLD in http://www.service.sap.com/smb
    Rgds,

  • Can we use ad hoc query to get a temporary report of payroll result?

    Hi,All
    can we use ad hoc query to get a temporary report of payroll result?or we have to get a report of payroll result by customizing and ABAP?
    and how can I customizing a report on the basis of standard SAP report for payroll?

    Hi
    As of my Knowledge You cannot get the payroll report through Adhoc query you have to go for ABAP Devlopment
    Thanks
    Mahantesh

  • Creating multiple tab reports using the same query in Web intelligence

    Hi All,
    I have created a Universe on a BW Query which has fields as below
    AGE  Depaatment  Gender  Grade
    25       FIN                M            A
    27       LES               F            A+
    60       SWS            M             A++
    Based on this data i have created a WEbi report which shows all of these data under one tab.
    Now i create a new report tab in the same Webi Document by right cliicking the existing report and going to inset report and saving it.
    Similarly i create two more new report tabs.
    in each of these tabs i want to show data only for the concened departments.ie =1st report contains all the departments.
    2nd report contains only finance data, third contains only Les data  and fourth only SWs Data.
    Is it possible to create this report using the same query?
    Regards,
    Raj.

    You should use report filters, not query filters.
    A query filter will affect the entire document. Every report tab that pulls data from that query will be impacted. If you start with a single report, by default it shows the data from the query. If you duplicate that report tab, then it's still attached to the first query. There are various ways to create report filters (input controls, quick filter, invoking the filter area from the toolbar) and a report filter impacts only blocks on that report tab. You can even create block filters by clicking on the block first, then creating your filter.
    This is a fairly confusing bit for folks that are new to Web Intelligence.

  • Benefit cost reporting in ad hoc query

    Is it possible to use ad hoc query to report on future dated benefit cost changes?  I have tried several different ways but have not been successful.
    I tried changing the date of the reporting period to match that of the effective date for the benefit cost change but the system still outputs the old costs.
    I also tried using the benefit cost calculation date as a selection field and then enter the effective date for benefit change but that did not work either.
    Does anyone have any insight?  Thanks in advance for your input!

    Did you ever find an answer to your question?  I am having the exact same issue.  Unless a new infotype is saved with the dates that coincide with the cost configuration change, I cannot report on the new cost via Ad hoc or SAP query.  The only thing that works is the standard health plan cost report but my users prefer to use query so they can get every field they need.

  • AAP and EEO Report by Ad Hoc Query

    SAP Gurus,
    My client went live with basic modules of SAP Jan 2007. The problem is with AAP EEO Report. We will develop ABAP report later. For now we want to generate the AAP EEO report by using Ad Hoc Query. We are storing the EEO and AAP codes in IT1610  for Job. If I have to build query what is the best way :
    1-     I tried an infoset with  PNPCE and apart from the basic PA infotypes I selected 1000, 1001 and 1610 for job. But when I select EEO and AAP category in output I don’t get the actual data. I know I am doing something wrong here but don’t know what ?
    2-     If I will start a table join with IT0000, IT0001,……….etc and V_T5U13 …….will it work ?
    Any other suggestions how can we address this issue temporarily by ad hoc query ?
    Sanghamitra

    First, do not try and reinvent the wheel...the EEO-1 and AAP reports are standard supplied SAP reports and can be found under Human Resources --> Personnel Management --> Administration --> Infosystem --> Reports --> Administration US --> Compliance.
    The EEO-1 report is changing for 2007 and the latest support packs must be installed to give you the new tables and table entries, features and report layout needed for this year.  See SAP Notes 976273, 435204 and 986115.  The IT1610 itself changes as do the definitions, so the support pack installation is a must,
    If you still want to try to get this information via Ad Hoc Query, you will need to utilize a PCH based Infoset.  Create this based on the object Position.  The position is your link between the person with HR Master Data and the Job with job related data such as IT1610.  With this infoset, you can do the reporting on the EEO Job classes from IT1610 and the Ethnic groupings from IT0077-Additional Personal Data for the employee and gender from IT0002.

  • To find and open Crystal Reports using SI_Name & SI_PARENT_FOLDER

    Hi,
    I have been given the below properties and link, which uses Crystal Reports (I guess its using java integration)
    http://<portal server>/projectsportal/jsp/collaboration/deliverables/pdf_report.jsp?entity=1&Entity_Type=P&Key_Indicators=Y&LV_FROM_FY=&LV_TO_FY=
    The properties used are
    CMSName = 138.220.5.56:6400
    hostName= crystalprd
    authentication = secEnterprise
    #infoStoreQuery = SELECT * FROM CI_INFOOBJECTS WHERE ( SI_NAME = 'OrganizationReport' AND SI_PROGID = 'CrystalEnterprise.Report' AND SI_PARENT_FOLDER = 2000 )
    infoStoreQuery = SELECT * FROM CI_INFOOBJECTS WHERE ( SI_NAME = 'scorecard' AND SI_PROGID = 'CrystalEnterprise.Report' )
    I have to make few changes in the Crystal Reports.
    Please help me in finding out the report.  What is the location of the report ?
    Thanks in Advance for your timely help.
    Eswari.

    You have most of the info already here.  Just use Query Builder to pull back the rest of the object info and you'll have what you need.  I'm not sure which report you want, but either can be achieved in much of the same way.  You'll need to know the parent-child heirarchy for the folder structure to determine where this report sits.  once you have this info, open the CR designer and open the report from the repository navigating the folder heirarchy you found.
    1.  Open "Query Builder" from the start | programs menu on the server.  Depending on the version of XI you are using, the url will differ.
    2.  Execute a query similar to what you posted to bring back the info for the report object (not instances) with the name 'scorecard'. If multiple reports exist in different folders with the same name, they will all be returned.
    SELECT * FROM CI_INFOOBJECTS WHERE SI_NAME = 'scorecard' AND SI_PROGID = 'CrystalEnterprise.Report' and SI_INSTANCE = 0
    3.  Look for SI_PARENT_FOLDER attribute and query on this ID next.  That should give you the name of the parent folder the report sits within.
    SELECT * FROM CI_INFOOBJECTS WHERE SI_ID = <si_parent_folder>
    4.  You will need to keep querying for the parent in order to work your way up the folder tree.

  • Where to find Standard Audit Trail reports in SAP BPC 10

    Hi Experts,
    We being new to SAP BPC v 10 are stuggling to find the standard Audit trail reports which were present in version 7.
    Can any body guide us with the roadmap by which we can see those standard Audit trail reports in version 10.
    Thanking in Anticipation for a quick and favorable response.

    Hi Sanjeev,
    In SAP BI, we have standard BI content reports which is present which just needs to be installed and is ready to be used.We are trying to find such Audit trail reports and unable to find those reports in SAP BPC 10 NW version.
    Could you please guide us if we are missing anything.
    Thanks in advance.
    Thanks & Regards,
    M.S

  • Where to find best practices for tuning data warehouse ETL queries?

    Hi Everybody,
    Where can I find some good educational material on tuning ETL procedures for a data warehouse environment?  Everything I've found on the web regarding query tuning seems to be geared only toward OLTP systems.  (For example, most of our ETL
    queries don't use a WHERE statement, so the vast majority of searches are table scans and index scans, whereas most index tuning sites are striving for index seeks.)
    I have read Microsoft's "Best Practices for Data Warehousing with SQL Server 2008R2," but I was only able to glean a few helpful hints that don't also apply to OLTP systems:
    often better to recompile stored procedure query plans in order to eliminate variances introduced by parameter sniffing (i.e., better to use the right plan than to save a few seconds and use a cached plan SOMETIMES);
    partition tables that are larger than 50 GB;
    use minimal logging to load data precisely where you want it as fast as possible;
    often better to disable non-clustered indexes before inserting a large number of rows and then rebuild them immdiately afterward (sometimes even for clustered indexes, but test first);
    rebuild statistics after every load of a table.
    But I still feel like I'm missing some very crucial concepts for performant ETL development.
    BTW, our office uses SSIS, but only as a glorified stored procedure execution manager, so I'm not looking for SSIS ETL best practices.  Except for a few packages that pull from source systems, the majority of our SSIS packages consist of numerous "Execute
    SQL" tasks.
    Thanks, and any best practices you could include here would be greatly appreciated.
    -Eric

    Online ETL Solutions are really one of the biggest challenging solutions and to do that efficiently , you can read my blogs for online DWH solutions to know at the end how you can configure online DWH Solution for ETL  using Merge command of SQL Server
    2008 and also to know some important concepts related to any DWH solutions such as indexing , de-normalization..etc
    http://www.sqlserver-performance-tuning.com/apps/blog/show/12927061-data-warehousing-workshop-1-4-
    http://www.sqlserver-performance-tuning.com/apps/blog/show/12927103-data-warehousing-workshop-2-4-
    http://www.sqlserver-performance-tuning.com/apps/blog/show/12927173-data-warehousing-workshop-3-4-
    http://www.sqlserver-performance-tuning.com/apps/blog/show/12927061-data-warehousing-workshop-1-4-
    Kindly let me know if any further help is needed
    Shehap (DB Consultant/DB Architect) Think More deeply of DB Stress Stabilities

Maybe you are looking for

  • ICHAT: It says my Built-in iSight is in use my another program (help)

    Alright. So at first my iSight worked in nothing. so i reinstalled quicktime. Now it works in photobooth and iMovie But it still says its in use by another program in ichat This is my first mac, its very upsetting I looked in the system profiler and

  • Photos on my ipod touch disappeared!

    I went to Paris, took some photos using the ipod camera and Instagram. These photos are no longer on my ipod! Older photos are still there and more recent ones too - what happened? Have I lost them forever? Did I delete them by accident, if so, what

  • FINANCE-PAYMENT ADVICE - TOTALS ISSUE

    Hi, We generated a payment run using transactionF110, Run date xxxxx , Identification: xxxxxx for Company Code : xxxxxxx Supplier had called to say they did not received the payment advice, pls advise how I could print out the payment advice on site

  • Adobe Acrobat 8 Professional SDK

    Is SDK included with Adobe Acrobat 8 Professional?  Is it seperate purchse/install?  What is the link to the version 8 SDK documentation? I found version 9 SDK documentation link but can not find version 8.

  • Incomplete items in Catalog. Only completed items were transferred.

    Hi all, i have a problem related to Shopping Cart. When I select an item from  my catalog in order to add it to my Shopping Cart, I have that error message:"Incomplete items in Catalog. Only completed items were transferred." I checked UOM but there