Win8 ADK: Dism Problems (.DLL related?)

I'm having some problems with the Win8 ADK; specifically, DISM, and it appears to be a bug related to how the ADK is installed and it's .DLLs are registered.
I created a Windows 8 x64 VM from scratch and installed WADK, and once finished, opened a Shell with the Deployment and Imaging Tools environment settings as Administrator. I then ran the copype script to create a fresh copy of WinPE to begin servicing:
copype x86 C:\test
This command executes as expected. I then attempt to mount the new image:
dism /mount-image /imagefile:C:\test\media\sources\boot.wim /index:1 /mountdir:C:\test\mount
This operation fails with the following output:
Deployment Image Servicing and Management tool
Version: 6.2.9200.16384
Error: 3
The system cannot find the path specified.
The DISM log file can be found at C:\Windows\Logs\DISM\dism.log
Now, what's bizarre is that if I proceed to uninstall WADK, I can then immediately re-run the same operation and it will work correctly -- presumably using the Windows 8's built-in DISM tools. If I reinstall WADK, once again I cannot mount images--uninstall,
and everything is fixed again.
I've been trying this on various machines in our organization, and so far I've encountered this problem on one Windows 8 VM, as well as a coworkers Windows 7 x64 workstation. Strangely, other coworkers (also using Windows 7 x64) seem to be having no problems
related to mounting images with DISM.
Are there known issues with WADK/DISM? It seems like the WADK might have some issues in installing/registering the necessary DISM files, in that the same error can occur on Windows 8 and also 7. I can only confirm that I've seen this issue on x64, but I
haven't had the resources to try and test to look for similar problems in x86 environments.
Can anyone advise on this issue?

To be clear, I installed the WADK in order to create a new copy of Windows PE (x86) to
C:\Test. To that order, the following directories exist:
C:\Test
C:\Test\fwfiles
C:\Test\media
C:\Test\mount
Further, I can run copype x86 C:\Test successfully after installing the WADK. However, mounting the image is where the problem comes in. Again, here is the command I'm using to mount the image:
dism /mount-image /imagefile:C:\test\media\sources\boot.wim /index:1 /mountdir:C:\test\mount
With WADK installed, this operation fails citing "Error 3: The system cannot find the path specified." If I uninstall the WADK, I can then successfully mount the image using the same command. I expect that
the difference is that with WADK installed, some DLL confusion is taking place. When I uninstall the WADK, I'm now mounting the image using the built-in DISM components, and it works correctly.
Attached are two seperate DISM logs: The first is of DISM failing to mount the image with WADK installed. The second is of successfully mounting the image after uninstalling WADK and using Windows alone.
Windows 8 + WADK installed (/mount-image fails):
2013-04-02 10:21:33, Info DISM PID=1604 TID=2396 Scratch directory set to 'C:\Users\Justin2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2013-04-02 10:21:33, Info DISM PID=1604 TID=2396 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-04-02 10:21:33, Info DISM PID=1604 TID=2396 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Manager: PID=1604 TID=2396 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM.EXE:
2013-04-02 10:21:33, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-02 10:21:33, Info DISM DISM.EXE:
2013-04-02 10:21:33, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=1
2013-04-02 10:21:33, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
2013-04-02 10:21:33, Info DISM DISM.EXE: Executing command line: dism /mount-image /imagefile:C:\test\media\sources\boot.wim /index:1 /mountdir:C:\test\mount
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:21:33, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2013-04-02 10:21:33, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2013-04-02 10:21:33, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2013-04-02 10:21:33, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2013-04-02 10:21:33, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting Provider GenericImagingManager - CDISMProviderStore::GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:21:33, Info DISM DISM Imaging Provider: PID=1604 TID=2396 WIM image specified - CGenericImagingManager::GetImageInfoCollection
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Getting Provider WimManager - CDISMProviderStore::GetProvider
2013-04-02 10:21:33, Info DISM DISM Provider Store: PID=1604 TID=2396 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[1604] [0x80070003] OpenFilterPort:(582): The system cannot find the path specified.
[1604] [0x80070003] FltCommVerifyFilterPresent:(1172): The system cannot find the path specified.
[1604] [0x80070003] WIMMountImageHandle:(877): The system cannot find the path specified.
[1604] [0x80070002] StateStoreRemoveMountedImage:(1041): The system cannot find the file specified.
[1604] [0x80070002] WIMMountImageHandle:(1116): The system cannot find the file specified.
2013-04-02 10:21:34, Error DISM DISM WIM Provider: PID=1604 TID=2396 Failed to mount the image. - CWimImageInfo::Mount(hr:0x80070003)
2013-04-02 10:21:34, Error DISM DISM Imaging Provider: PID=1604 TID=2396 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:795 - CGenericImagingManager::InternalOpMount(hr:0x80070003)
2013-04-02 10:21:34, Error DISM DISM Imaging Provider: PID=1604 TID=2396 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:715 - CGenericImagingManager::InternalCmdMount(hr:0x80070003)
2013-04-02 10:21:34, Error DISM DISM Imaging Provider: PID=1604 TID=2396 base\ntsetup\opktools\dism\providers\imagingprovider\dll\genericimagingmanager.cpp:513 - CGenericImagingManager::ExecuteCmdLine(hr:0x80070003)
2013-04-02 10:21:34, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2013-04-02 10:21:34, Info DISM DISM.EXE:
2013-04-02 10:21:34, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2013-04-02 10:21:34, Info DISM DISM.EXE:
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:21:34, Info DISM DISM Provider Store: PID=1604 TID=2396 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Windows 8 (WADK uninstalled, /mount-image succeeds):
2013-04-02 10:15:36, Info DISM PID=1016 TID=1228 Scratch directory set to 'C:\Users\Justin2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2013-04-02 10:15:36, Info DISM PID=1016 TID=1228 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-04-02 10:15:36, Info DISM PID=1016 TID=1228 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Manager: PID=1016 TID=1228 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM.EXE:
2013-04-02 10:15:36, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-02 10:15:36, Info DISM DISM.EXE:
2013-04-02 10:15:36, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=1
2013-04-02 10:15:36, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
2013-04-02 10:15:36, Info DISM DISM.EXE: Executing command line: dism /mount-image /imagefile:C:\test\media\sources\boot.wim /index:1 /mountdir:C:\test\mount
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:15:36, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2013-04-02 10:15:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2013-04-02 10:15:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2013-04-02 10:15:36, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2013-04-02 10:15:36, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting Provider GenericImagingManager - CDISMProviderStore::GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:15:36, Info DISM DISM Imaging Provider: PID=1016 TID=1228 WIM image specified - CGenericImagingManager::GetImageInfoCollection
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Getting Provider WimManager - CDISMProviderStore::GetProvider
2013-04-02 10:15:36, Info DISM DISM Provider Store: PID=1016 TID=1228 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[1016] Caller did not request sparse mount
[1016] Mounting new image.
Wim: [C:\test\media\sources\boot.wim]
Image Index: [1]
Mount Path: [C:\test\mount]
[1016] Wimserv process started for guid f7dd9f47-ec90-46f3-88f5-3953b995ef9c. Id is 1052
[1052] ImageUnmarshallHandle: Reconstituting wim at C:\test\media\sources\boot.wim.
[1052] Mounted image at C:\test\mount.
2013-04-02 10:15:59, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2013-04-02 10:15:59, Info DISM DISM.EXE:
2013-04-02 10:15:59, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2013-04-02 10:15:59, Info DISM DISM.EXE:
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:15:59, Info DISM DISM Provider Store: PID=1016 TID=1228 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:03, Info DISM PID=1604 TID=2280 Scratch directory set to 'C:\Users\Justin2\AppData\Local\Temp\'. - CDISMManager::put_ScratchDir
2013-04-02 10:16:03, Info DISM PID=1604 TID=2280 DismCore.dll version: 6.2.9200.16384 - CDISMManager::FinalConstruct
2013-04-02 10:16:03, Info DISM PID=1604 TID=2280 Successfully loaded the ImageSession at "C:\Windows\System32\Dism" - CDISMManager::LoadLocalImageSession
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Found and Initialized the DISM Logger. - CDISMProviderStore::Internal_InitializeLogger
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Failed to get and initialize the PE Provider. Continuing by assuming that it is not a WinPE image. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Finished initializing the Provider Map. - CDISMProviderStore::Final_OnConnect
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Manager: PID=1604 TID=2280 Successfully created the local image session and provider store. - CDISMManager::CreateLocalImageSession
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider DISMLogger - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM.EXE:
2013-04-02 10:16:03, Info DISM DISM.EXE: <----- Starting Dism.exe session ----->
2013-04-02 10:16:03, Info DISM DISM.EXE:
2013-04-02 10:16:03, Info DISM DISM.EXE: Host machine information: OS Version=6.2.9200, Running architecture=amd64, Number of processors=1
2013-04-02 10:16:03, Info DISM DISM.EXE: Dism.exe version: 6.2.9200.16384
2013-04-02 10:16:03, Info DISM DISM.EXE: Executing command line: dism /unmount-image /mountdir:C:\test\mount /discard
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting the collection of providers from a local provider store type. - CDISMProviderStore::GetProviderCollection
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Loading Provider from location C:\Windows\System32\Dism\FolderProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Connecting to the provider located at C:\Windows\System32\Dism\FolderProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Loading Provider from location C:\Windows\System32\Dism\WimProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Connecting to the provider located at C:\Windows\System32\Dism\WimProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Loading Provider from location C:\Windows\System32\Dism\VHDProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Connecting to the provider located at C:\Windows\System32\Dism\VHDProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Loading Provider from location C:\Windows\System32\Dism\ImagingProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Connecting to the provider located at C:\Windows\System32\Dism\ImagingProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has not previously been encountered. Attempting to initialize the provider. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Loading Provider from location C:\Windows\System32\Dism\CompatProvider.dll - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Connecting to the provider located at C:\Windows\System32\Dism\CompatProvider.dll. - CDISMProviderStore::Internal_LoadProvider
2013-04-02 10:16:03, Info DISM DISM.EXE: Got the collection of providers. Now enumerating them to build the command table.
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: DISM Log Provider
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: FolderManager
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: WimManager
2013-04-02 10:16:03, Info DISM DISM.EXE: Succesfully registered commands for the provider: WimManager.
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: VHDManager
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: GenericImagingManager
2013-04-02 10:16:03, Info DISM DISM.EXE: Succesfully registered commands for the provider: GenericImagingManager.
2013-04-02 10:16:03, Info DISM DISM.EXE: Attempting to add the commands from provider: Compatibility Manager
2013-04-02 10:16:03, Info DISM DISM.EXE: Succesfully registered commands for the provider: Compatibility Manager.
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider GenericImagingManager - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider VHDManager - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
2013-04-02 10:16:03, Info DISM DISM VHD Provider: PID=1604 TID=2280 [C:\test\mount] is not recognized by the DISM VHD provider. - CVhdImage::Initialize
2013-04-02 10:16:03, Info DISM DISM Imaging Provider: PID=1604 TID=2280 The provider VHDManager does not support CreateDismImage on C:\test\mount - CGenericImagingManager::CreateDismImage
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Getting Provider WimManager - CDISMProviderStore::GetProvider
2013-04-02 10:16:03, Info DISM DISM Provider Store: PID=1604 TID=2280 Provider has previously been initialized. Returning the existing instance. - CDISMProviderStore::Internal_GetProvider
[1604] ImageUnmarshallHandle: Reconstituting wim at C:\test\media\sources\boot.wim.
[1604] ImageUnmarshallHandle: Reconstituting wim at C:\test\media\sources\boot.wim.
[1604] ImageUnmarshallHandle: Reconstituting wim at C:\test\media\sources\boot.wim.
[1052] Received unmount request for image with guid f7dd9f47-ec90-46f3-88f5-3953b995ef9c.
[1052] Unmount for image at C:\test\mount complete.
2013-04-02 10:16:13, Info DISM DISM.EXE: Image session has been closed. Reboot required=no.
2013-04-02 10:16:13, Info DISM DISM.EXE:
2013-04-02 10:16:13, Info DISM DISM.EXE: <----- Ending Dism.exe session ----->
2013-04-02 10:16:13, Info DISM DISM.EXE:
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Found the OSServices. Waiting to finalize it until all other providers are unloaded. - CDISMProviderStore::Final_OnDisconnect
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Disconnecting Provider: FolderManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Disconnecting Provider: WimManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Disconnecting Provider: VHDManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Disconnecting Provider: GenericImagingManager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Disconnecting Provider: Compatibility Manager - CDISMProviderStore::Internal_DisconnectProvider
2013-04-02 10:16:13, Info DISM DISM Provider Store: PID=1604 TID=2280 Releasing the local reference to DISMLogger. Stop logging. - CDISMProviderStore::Internal_DisconnectProvider
Further:
When running DISM commands in Windows 8 w/o WADK, I'm running from an elevated Console
When running DISM commands on Windows 8 w/ ADK, I've tried running from an elevated Console, elevated DISM environment Console (installed with the WADK), as well as running dism.exe specifically from the Windows Kits\8.0\Assessment and Deployment Kit\Deployment
Tools\amd64 as well as x86 directories. All fail as above.
This problem is reproduceable in my HyperV session, I can install/uninstall WADK repeatedly and receive the same results. To that end, I can capture a video and post to Youtube (or elsewhere) to help share the operations I'm going through. I could also take
a snapshot and perform other testing.
It seems that installing the WADK is causing some libraries to be stomped on, for lack of a better term. Also importantly, a co-worker who has Windows 7 x64 is getting the same type of error, although because he's running Windows 7 and not Windows 8, he cannot
test a mounting operation without the WADK (as Windows 7 does not include the DISM tools as Windows 8 does.)

Similar Messages

  • TS3074 im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    im can u please help me out this issue im trying to install iTunes  in windows 7 some error showing " windows installer package problem DLL require to complete this installation" this message showing.

    Try the following user tip:
    " ... A DLL required for this installation to complete could not be run ..." error messages when installing iTunes for Windows

  • Problem using relative sizes on a HTMLtext

    Hi
    I have a problem using relative sizes on a HTMLtext on Flash
    ActionsScript
    2.0
    Something like:
    htmltext= '<font size="+5">TITLE</font>Text
    Praragraph...'
    (+5 in normal HTML means is 5 points bigger than the standard
    text.)
    I create the the textArea i set the size and everything if I
    do it by
    actionscript everything works fine except when i setup the
    htmltext, the
    text disspears so I need to re-set the embeded font with:
    myTextFormat.font = Varfont;
    textBox.embedFonts = true;
    textBox.setTextFormat(myTextFormat);
    But using this lines I lose the previous size. that i
    assigned before when i
    created the textarea. And goes to a standard size... dont
    know why, i am
    using a different TextFormat.....
    And If i want to use the size i was using , all the text
    becomes the same
    size (but is the size that I want)...
    If I create the text area manually using the gui, it works
    well.
    ¬_¬
    >-------------------------------------------------------------------------------------<
    The main problem is... why the the text dissapears when i set
    a new html
    text???
    >-------------------------------------------------------------------------------------<
    Thanks.

    1. Really there are a few functions that i skiped yesterday:
    3. The font is linked and embeded in library.
    public function setHTMLText(texto:String):Void {
    textBox.html = true;
    textBox.htmlText = texto;
    public function setEmbedFont(__font) {
    _font = __font;
    _embed = true;
    setTextStyle(__font);
    public function setTextStyle(__font:String, __bold:Boolean,
    __underline:Boolean, __italic:Boolean) {
    var myTextFormat:TextFormat = new TextFormat();
    myTextFormat.font = _font;
    textBox.setTextFormat(myTextFormat);
    public function setTextSize(__size:Number) {
    var myTextSize:TextFormat = new TextFormat();
    myTextSize.size = _size;
    textBox.setTextFormat(myTextSize);
    Kind of constructor:
    autotext_txt.setTextSize(20);
    //1 if I activate this one the text will dissapear after
    asigning a new
    text. And I will need to apply the embed font again.
    autotext_txt.setEmbedFont("Arial2");
    autotext_txt.setHTMLText(This is a text (big text) | <font
    size="-5"
    color="#dddddd"> Small Text</font>');
    autotext_txt.setEmbedFont("Arial2");
    Why dont u have a try?
    Thanks,
    J
    "kglad" <[email protected]> escribió en
    el mensaje
    news:elo6bk$pu3$[email protected]..
    > 1. where's Varfont defined?
    > 2. htmtext should be htmlText.
    > 3. have you defined a linkage id for a library font?

  • I get a a message "javascript: void (0)" when I turn on online radio. This problem is related also with other browsers. I reinstalled java but nothing changed

    This problem is related also with chrome, opera and explorer. I reinstalled java but nothing changed

    To avoid confusion:
    *http://kb.mozillazine.org/JavaScript_is_not_Java
    Note the javascript: void(0); is often use as a placeholder URL to indicate that an onclick event is tied to the link to do the actual action.<br />
    If JavaScript is blocked for some reason then this javascript: void(0); links comes into view.
    Make sure that you do not block JavaScript.
    *http://kb.mozillazine.org/JavaScript
    Also make sure that your security software isn't blocking JavaScript if it happens in other browsers as well.
    You can try these steps in case of issues with web pages:
    Reload web page(s) and bypass the cache to refresh possibly outdated or corrupted files.
    *Hold down the Shift key and left-click the Reload button
    *Press "Ctrl + F5" or press "Ctrl + Shift + R" (Windows,Linux)
    *Press "Command + Shift + R" (Mac)
    Clear the cache and cookies only from websites that cause problems.
    "Clear the Cache":
    *Firefox/Tools > Options > Advanced > Network > Cached Web Content: "Clear Now"
    "Remove Cookies" from sites causing problems:
    *Firefox/Tools > Options > Privacy > Cookies: "Show Cookies"
    Start Firefox in <u>[[Safe Mode|Safe Mode]]</u> to check if one of the extensions (Firefox/Tools > Add-ons > Extensions) or if hardware acceleration is causing the problem (switch to the DEFAULT theme: Firefox/Tools > Add-ons > Appearance).
    *Do NOT click the Reset button on the Safe Mode start window.
    *https://support.mozilla.org/kb/Safe+Mode
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes

  • Bsod Problem, Bios Related?? ati2cqag.dll?? Plz Help Guys

    well i have quite a problem here and i dont know if the bios is related to it.
    my specs are:
    msi k9ngm-l (V3.7b1 bios)
    amd 64 x2 5600+ (2.9ghz)
    4 gb ram (though i see only 3 because of xp)
    radeon hd 4850 512mb
    for about 2 weeks im having wierd bsod during gamming but usualy its when i quit a game, before it gets back to desktop it will bsod. when i get the bsod it says the cause is FAULT_IN_NONPAGED_AREA and related to ati2cqag.dll
    ive updated my graphic card driver, didnt help, downgraded version of driver, didnt help, i must point that one of the "uninstall" drivers went wrong and gave me some trouble but ive cleared all the files, registry keys and installed again new drivers. the bsod didnt stop. ive then tan memtest for 4 hours, no faulty ram according to it. i can play fine, no drop in frames its normal, its just crashes randomly.ive stressed the gpu and its fine. ive searched for answers but cant find the problem. any help would be great. thanks in advance

    Do memory check with >>Memtest86<<
    List PSU brand with details, look over PSU sticker.
    "amd 64 x2 5600+ (2.9ghz)
    4 gb ram"
    That's 2 or 4 memory sticks?

  • Lync 2013 installation problem - dll file missing

    Hi,
    I've encountered this problem with Lync 2013 installation on 2 different computers.
    Error message:
    "perfboost.exe - System Error
    The program can't start because appvisvsubsystems32.dll is missing from your computer. Try reinstalling the program to fix this problem."
    The first time i got this error was while installing Lync 2013 (32-bit ver.) for a user with an E1 Office 365 plan and an Office 2013 Home and Business suite installed (32-bit version) on a 64-bit Win 7 Pro machine. The installation completed despite the
    error message but Lync could not connect to the server saying that "the server for
    domain.eu cannot be found". I tried the manual configuration with the same result. I'm confident it's not a DNS problem as other users within the same domain are using Lync 2013 with no connectivity issues.
    The second time I got the error was when installing Lync 2013 on a new machine, also with Office 2013 H&B 32-bit and Lync 2013 32-bit downloaded from the user's Office 365 account (also plan E1). The installation also completed but I had no problems
    logging the user in (it's another user, same domain)
    Anyone has a clue about this? Should I install the 64-bit Lync version instead? Would it conflict with the 32-bit Office 2013?
    Thanks.
    Luka

    Hi Teklace,
    The issue is more related to Office, You may repair Office 2013 using the following link and check if it works fine as expected:
    https://support.office.com/en-us/article/Repair-an-Office-application-7821d4b6-7c1d-4205-aa0e-a6b40c5bb88b?ui=en-US&rs=en-US&ad=US
    Some similar cases for your reference.
    https://social.technet.microsoft.com/Forums/office/en-US/4fdea64f-e7c8-4e08-95b2-fb54984d617f/appvisvsubsystems32dll-error?forum=officesetupdeploy
    http://answers.microsoft.com/en-us/office/forum/officeonline-word_online/appvisvsubsystems32dll/75c4067b-d23f-4d50-bd23-82934852fed8
    http://answers.microsoft.com/en-us/office/forum/office_365hp-office_install/appvisvsubsystem32dll/106805c1-5928-4a7e-a8b7-6c438e279969
    If the error still exists, to ensure you get better support, I suggest you turn to our Office forum for dedicated support. With the assistance provided there, it is more likely the issue can
    be resolved. Sorry for any inconvenience this caused. Thanks for your understanding.
    https://social.technet.microsoft.com/Forums/office/en-US/home?category=officeitpro
    Best regards,
    Eric

  • Batch editing ratings problems (Beatunes related)

    Is there a windows script that would enable to batch edit ratings in both the iTunes library, and within each mp3?
    Secondly, is there a way to enable half star ratings in the latest 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise)?
    I've never used half star ratings on my iTunes library, and upon reading, am not certain if this is possible anymore.
    For the last few months, I've been using Beatunes to organize my large sized iTunes library, but seem to have hit some glitches related to ratings.
    In short, when I access my Itunes library via Beatunes, about 5000 songs appear to have "1/2" in the rating field.
    Itunes library seems to see these songs as having no rating.
    Beatunes does not allow ratings to be edited, and since the 1/2 is not seen in iTunes, I would select all those songs and use an empty tag (such as "Show") and designate the value as "Half". In iTunes, I would then select the "Show" column, and highlight all the songs with "Half" in the "Show" column, right click, and change the rating value for all songs. For testing purposes, I changed all songs to have 2 stars. When I sync the Beatunes database to the iTunes database, eventually the Beatuens ratings change to 2 stars (sometimes, it takes a few syncs).
    I would then go back to iTunes, right click on all selected songs, and change rating value to "None". Most ratings change to empty values, while some decide to take on hollow star values, which is really really annoying.
    I then used Steve MacGuire's ClearTrackAutoRating script on those selected tracks:
    http://samsoft.org.uk/iTunes/scripts.asp
    When I sync the Beatunes database with the iTunes database, the songs I had rated 2 stars go back to "1/2" rating, and not an empty field.
    I can't figure out what is triggering this.
    I've started a thread in Beatunes forum (http://help.beatunes.com/discussions/problems/40759-half-star-ratings-problems), but figured I would start one here to ask for advice, or see if there are any other scripts I should consider trying. At this time, I have not heard back from the developer, as I just posted it a few hours ago.
    One of the things I just tried doing was enabling iTunes to use half star ratings (so i could see the 1/2 rated songs would then show), but I have not been able to figure out how to do this. The most common way of altering iTunesPrefs.xml did not do anything for me:
    http://blog.beatunes.com/2011/08/showing-half-star-ratings-in-itunes.html
    http://www.instructables.com/id/How-To-Enable-Half-Stars-In-Itunes/
    Hence why I was wondering if this hack still works on 64bit version of iTunes (running on 64bit Windows 8.1 Enterprise).
    I also came across this:
    http://www.nextofwindows.com/interesting-tip-how-to-enable-half-star-rating-in-i tunes-in-windows/
    They suggest adding:<key>storefront</key> <string>143441-1,12</string> at the end of iTunesPrefs.xml
    This is confusing, because my prefs already contain the following at the end:
    <key>storefront</key> <string>143455-6,17</string>
    Am I supposed to keep my existent, and just add after, or do I replace what is there?
    Any help/advice would be very much appreciated.

    Hi there...
    I've had a quick check and the iTunesPrefs.xml hack works for me to enable half-ratings. Tested on iTunes 11.1.5 running on Windows 7 32-bit, but no reason to expect platform differences. This build displays ½ rather than a half-star. Once enabled you can set half-ratings via the iTunes interface. I haven't set back yet but presumably they will disappear if I do.
    The album and track ratin properties take a value from 0% to 100%. If 0% iTunes will offer a track-auto rating based on any manual album rating and an album auto-rating based upon manual track ratings. My scripts set a manual rating of 1% which iTunes treats as less than ½ and so displays as no rating, but it suppresses any auto-rating. Presumably Beatunes is treating anything from 1%-10% as ½ star, 11%-20% as 1 star, and so on. For iTunes from 0%-9% is no stars, 10%-19% is ½ star, 20%-29% is 1 star, etc., with bigger ranges when half-ratings are not enabled.
    My scripts page already has ResetAlbumAutoRating and ResetTrackAutoRating scripts if you need to remove those 1% values, or you can simply set a new rating and then remove it.
    What additional batch rating task do you have in mind?
    tt2

  • Problem in relational blocks(Parent Child Grand Child

    Hi all
    I am working on Oracle Forms 10g Release-2.
    I am facing a problem in a form which consists three relational block. Blocks are organised as below:
    1.Parent >> 2.Child. >> 3.Grand Child.
    In 2.Child Block I have multiple records, each record has detail records in Grand Child block. Now if I move cursor from parent block to child block in a record(2nd,3rd or any other) other than first record for the first time, the child and grand child blocks flash out automatically.But if click on first record of child block for the fisrt time, then this problem is not happening.In Grand child block I am not facing this kind of problem.
    Thanks
    Mokarem.

    'Flash out' means Child block and grand child block is cleared autromatically, if I navidate to the child block for the first time. But if I navigate to first record of child block then I am not getting this problem, but if I click 2nd or higher then this problem is happening.
    Thanks
    Mokarem.

  • Problem Using Relational Operators !!

    The code given under is not working corretly. The problem is stated as comments in the program.
    if(result.next())
    String temp_no=t_no.getText();
    String temp_nm=t_name.getText();
    String temp_result1= result.getString(2);
    String temp_result2= result.getString(3);
    if(temp_no!=temp_result1) // The condition is always true.Even if i give the same no & name as in database!! Why is it so?
    JOptionPane.showMessageDialog(cdFrame, new String("There Is No Disc With The Specified Number !!"));
    else
    if(temp_nm!=temp_result2)
    JOptionPane.showMessageDialog(cdFrame, new String("There Is No Disc With The Specified Name !!"));
    else
    upd.executeUpdate();     
    JOptionPane.showMessageDialog(cdFrame, new String("DATA HAS BEEN UPDATED !!"));
    else
    JOptionPane.showMessageDialog(cdFrame, new String("There Is No Such Disc As Stated In Old Data !!"));
    }                              The Program compiles properly and gives no runtime error. What's the problem!!

    yes dude, u can't use relational operators for objects.. its works only on simple data types..

  • Problem deploying related EJBs in separate JARs

    I have 2 entity EJBs, User and Address, in separate JAR files. The User bean
    has business methods to get and set its related address as follows:
    void setAddressPK(AddressPK newAddress) throws java.rmi.RemoteException;
    AddressPK getAddressPK() java.rmi.RemoteException;
    When I try and load User.jar in the EJB Deployment tool it complains that it
    can't find the AddressPK class. However, I can get round this by explicitly
    adding Address.jar to the classpath.
    When I actually deploy and use the User bean I do NOT need Address.jar on
    the classpath, although I do get warnings during deployment.
    So my question is how do I package and deploy related EJBs. I don't want to
    have to have all my EJBs in the same JAR, nor do I want to have the same
    classes in more than one JAR. Is what I'm doing correct - am I supposed to
    have Address.jar on the classpath? And what about an utility classes that
    are shared between EJBs - where do I put those?
    Thanks in advance,
    Steve.

    I resolved the problem be making sure that my deployment
    jars don't appear in my servlet classpath....
    Jason
    Jeff Wang <[email protected]> wrote in message news:[email protected]...
    In general, if two beans are related (i.e. you can not compile one
    without the other being on the classpath) and they are both deployed
    they should be in the same jar file. If you do not deploy one of them,
    then the undeployed bean can be in the weblogic.class.path with no
    problem.
    I suspect that you are getting a ClassCastException because you have the
    deployment jars in your weblogic.class.path (or java classpath.) Remove
    them, and see if the error is resolved.
    Jeff Wang
    WLCS 2.0 Software Engineer
    Jason Rosenberg wrote:
    Does the same apply for beans of different types? In other words, do
    I need to have an entity bean and a session bean which wraps the entity
    bean in the same jar file?
    I am having a problem accessing a session bean from a JSP servlet. I get
    the dreaded ClassCastException. I don't get this problem, however, if
    I access the session bean directly from a stand-alone java client. It's
    only when I access the session bean via JSP....
    Any ideas?
    Jason
    Jeff Wang <[email protected]> wrote in message news:[email protected]...
    What you should have in the .jar files are:
    the home (say it is called <bean>home.class)
    the remote (say it is called <bean>.class)
    the impl (say it is called <bean>impl.class)
    These are the only ones that should be in the .jar file. (not even the
    PK should be there, for an entity bean.) All the support classes should
    be in weblogic.class.path If you have cross jar dependencies,
    unfortunately, you will have to specify the jar in the
    weblogic.class.path... However, this is not a good idea, as you will
    have 2 class files in memory. At the very least, you will not be able
    to do hot deploy. Depending on your code, you'll have a "class cast
    exception <bean> can not be casted to an object of <bean>" (Something
    like that, I don't have the exact error in front of me.) In your
    example it is probably better to put User and Address in the same jar.
    Jeff Wang
    WLCS 2.0 Software Engineer
    Steve Ward wrote:
    I have 2 entity EJBs, User and Address, in separate JAR files. The User bean
    has business methods to get and set its related address as follows:
    void setAddressPK(AddressPK newAddress) throws java.rmi.RemoteException;
    AddressPK getAddressPK() java.rmi.RemoteException;
    When I try and load User.jar in the EJB Deployment tool it complains that it
    can't find the AddressPK class. However, I can get round this by explicitly
    adding Address.jar to the classpath.
    When I actually deploy and use the User bean I do NOT need Address.jar on
    the classpath, although I do get warnings during deployment.
    So my question is how do I package and deploy related EJBs. I don't want to
    have to have all my EJBs in the same JAR, nor do I want to have the same
    classes in more than one JAR. Is what I'm doing correct - am I supposed to
    have Address.jar on the classpath? And what about an utility classes that
    are shared between EJBs - where do I put those?
    Thanks in advance,
    Steve.

  • N95 autofocus problem software related

    I've had an N95 for more than a year. Part of the reason I bought it was the 8 GB - could take lots of pictures and video. I'm very disappointed. For reference, I am an eye doctor. I know a lot about prescribing glasses, I know optics, and I have done quite a lot of photography.
    As with most cameras, the N95 "take picture" key may be partly depressed to get the focus, then fully depressed to actually take the picture. (Auto mode.) It then takes sharp pictures, if lighting conditions are right, and the phone is held steadily.
    It can focus on everything from 20 cm or so to infinity. (Try partly depressing the button, you'll see the picture go in and out of focus, then fix on the sharpest setting.) (With some of the other modes, EG landscape, the focus is "fixed," IE, the camera does not try to autofocus, and you can take pictures a lot quicker.)
    So - the fact is established - the N95 hardware is capable of mechanical focussing, and some of its software can also detect which focus setting is the best. So it is not "handicapped" from birth. It should be possible to do something sensible with it. However, it behaves as a gifted child with an attitude problem. "No, mommy, I don't WANT to do homework!" (It's not that the homework is too hard.)
    However, there are three big problems:
    1) In "landscape" mode, the focus is not on infinity, it is closer. Thus, pictures of faraway objects taken in this mode are not sharp.
    2) The most vexing. When in video mode THE FOCAL LENGTH IS FIXED - and cannot be adjusted. Mine is sharp at 30-50 cm, but out of focus at distance. It SHOULD BE SHARP AT INFINITY! Who's interested in filming stuff at 30 cm distance? I cannot express with a keyboard alone how annoyed I've been. Sometimes I've put my eyeglasses (I'm nearsighted) over the lens, and the video becomes a lot better.
    3) There is no way to adjust focus "manually," even though it should be technically possible. 
    So, spare me the condescending stuff about image compression, light conditions etc. **bleep**! And, YES, of course I have set the "video quality" to "TV high quality." Doesn't help. THE PROBLEM IS PURELY OPTICAL! Otherwise my eyeglasses would not help. No, they don't enlarge the image, they just help the focus. (And, no, you cannot borrow my glasses )
    I've seen a lot of other discussions about this issue with the N95. None of them seem to give a good answer. Neither have I found a way of taking charge over the focal length. So, my questions are:
    *    Has Nokia come up with a solution? Has anyone who has sent the N95 in for service actually gotten some help?
    *    Is there some other software one can install that can do a better job than the **bleep** cam software of Nokia?
    *    Is it possible to hack or tweak the existing software to change the set points for video? (I assume it goes into a mode like this: "Set focus at 034, resolution at VGA" etc. The "034" (a totally random number, not related to anything) doesn't fix on infinity. Could I hack the setting so that it goes "Set focus at 015, resolution at VGA"? (Of course, one would have to change numbers a couple of times to get it right.)
    The N95 promised so much, but delivers so little (the camera is not the only problem), it is giving me an ulcer. Next  time I'm not really motivated to get a Nokia! I want revenge. Apple, can you make me happy? 

    Just a little addon - yes, I have the latest software / firmware updates installed.

  • Problems with relative positioning divs

    Hi all,
    I'm still new to this css layouts thing, but am stumped by this problem. I have numerous parent divs with multiple child divs within them on my page design, and for some reason these child divs are not taking up the correct spacing that I enter in the CSS. They are all relative positioned, mostly using floats and clears (and I don't think I've missed any of those). Help! Hoping that it's something simple I've missed.
    To pinpoint one example of this recurring problem, the #sidenav_one div will float: left with a spacing of top 8px and left 8px, but then #sidenav_two refuses to float: left, clear: both with a spacing of top 8px (I've had to put in 16px to actually get 8px, in both Firefox, Safari and Opera). (relevant parts of code highlighted).
    I am happy to change how I've structured the page, if people think there is a better or cleaner way to do it. Thanks in advance.
    A
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>United Future Foundation</title>
    <style type="text/css">
    <!--
    #container {
        position:absolute;
        left:517px;
        top:15px;
        width:972px;
        height:auto;
        z-index:1;
        background-color: #999;
        margin-left: -461px;
        padding-bottom: 25px;
    #banner {
        position:relative;
        width:872px;
        height:210px;
        z-index:2;
        background-color: #FFF;
        float: left;
        left: 50px;
        top: 15px;
        color: #999; 
    #banner_left { 
        position:relative; 
        width:450px; 
        height:70px; 
        z-index:2; 
        float: left; 
        left: 5px; 
        top: 5px; 
    #banner_right { 
        position:relative; 
        width:208px; 
        height:200px; 
        z-index:2; 
        float: right; 
        top: 5px; 
        right: 5px; 
    #banner_name { 
        position:relative; 
        width:550px; 
        height:140px; 
        z-index:2; 
        clear: left; 
        float: left; 
        left: 5px; 
    .rounded { 
        -moz-border-radius:5px; 
        -webkit-border-radius:5px; 
    body { 
        font-family: "Myriad Pro", "Helvetica Neue", sans-serif; 
    p { 
        font-family: "Myriad Pro", "Helvetica Neue", sans-serif; 
        font-size: 14px; 
        color: #000; 
    h1 { 
        font-size: 16px; 
        color: #000; 
        text-align: center; 
        vertical-align: top; 
    h2 { 
        font-size: 20px; 
        color: #000; 
        text-align: left; 
    #content { 
        position:relative; 
        left:50px; 
        width:872px; 
        height:auto; 
        z-index:2; 
        clear: both; 
        float: left; 
        background-color: #FFF; 
        top: 20px; 
    #sidenav_one {
        position:relative;
        left:8px;
        top:8px;
        width:136px;
        height:44px;
        z-index:2;
        background-color: #999;
        float: left;
        overflow: hidden;
    #sidenav_two {
        position:relative;
        left:8px;
        top:16px;
        width:136px;
        height:44px;
        z-index:2;
        background-color: #999;
        float: left;
        overflow: hidden;
        clear: left;
    #sidenav_three { 
        position:relative; 
        left:8px; 
        top:24px; 
        width:136px; 
        height:44px; 
        z-index:2; 
        background-color: #999; 
        clear: left; 
        float: left; 
        overflow: hidden; 
    #text { 
        position:relative; 
        top:8px; 
        width:700px; 
        height:auto; 
        z-index:2; 
        background-color: #FFF; 
        float: right; 
        right: 14px; 
    #home_home { 
        position:relative; 
        width:250px; 
        height:188px; 
        z-index:3; 
        clear: both; 
        float: left; 
        top: 10px; 
        left: 31px; 
    #home_about { 
        position:relative; 
        left:30px; 
        width:250px; 
        height:188px; 
        z-index:2; 
        float: left; 
        top: 10px; 
    #home_events { 
        float: left; 
        height: 188px; 
        width: 250px; 
        position: relative; 
        left: 30px; 
        top: 10px; 
    -->
    </style>
    <script type="text/JavaScript" src="curvycorners.js"></script>
    <script type="text/JavaScript">
    window.onload = function() {
        var settings = {
          tl: { radius: 5 },
          tr: { radius: 5 },
          bl: { radius: 5 },
          br: { radius: 5 },
          antiAlias: true
        var divObj = document.getElementById(".rounded"); 
        curvyCorners(settings, divObj);
    function MM_preloadImages() { //v3.0
      var d=document; if(d.images){ if(!d.MM_p) d.MM_p=new Array();
        var i,j=d.MM_p.length,a=MM_preloadImages.arguments; for(i=0; i<a.length; i++)
        if (a[i].indexOf("#")!=0){ d.MM_p[j]=new Image; d.MM_p[j++].src=a[i];}}
    function MM_swapImgRestore() { //v3.0
      var i,x,a=document.MM_sr; for(i=0;a&&i<a.length&&(x=a[i])&&x.oSrc;i++) x.src=x.oSrc;
    function MM_findObj(n, d) { //v4.01
      var p,i,x;  if(!d) d=document; if((p=n.indexOf("?"))>0&&parent.frames.length) {
        d=parent.frames[n.substring(p+1)].document; n=n.substring(0,p);}
      if(!(x=d[n])&&d.all) x=d.all[n]; for (i=0;!x&&i<d.forms.length;i++) x=d.forms[i][n];
      for(i=0;!x&&d.layers&&i<d.layers.length;i++) x=MM_findObj(n,d.layers[i].document);
      if(!x && d.getElementById) x=d.getElementById(n); return x;
    function MM_swapImage() { //v3.0
      var i,j=0,x,a=MM_swapImage.arguments; document.MM_sr=new Array; for(i=0;i<(a.length-2);i+=3)
       if ((x=MM_findObj(a[i]))!=null){document.MM_sr[j++]=x; if(!x.oSrc) x.oSrc=x.src; x.src=a[i+2];}
    </script>
    </head> 
    <body onload="MM_preloadImages('images/news_down.jpg','images/about_down.jpg','images/what_up.j pg','images/who_down.jpg','images/support_down.jpg','images/contact_down.jpg')">
    <div class="rounded" id="container">
    <div class="rounded" id="banner">
    <div id="banner_left"><img src="banner_uff.jpg" width="450" height="70" /></div>
    <div id="banner_right"><img src="ufflogo.jpg" width="208" height="200" /></div>
    <div id="banner_name"><img src="banner_name.gif" width="509" height="133" /></div>
    </div>
    <div id="spot">you are here</div>
    <div class="rounded" id="content">
    <div id="text">
    <h2> Breaking the Cycle - United Future Foundation</h2>
    <p>United Future Foundation is an Australian non-government organisation operating in Uganda. UFF is “breaking the cycle” through education. We believe that education is the primary means of creating lasting change, increasing literacy and improving employment. UFF is building a combined primary school and vocational training centre for over 300 students in the Kasanje region of Uganda. </p>
    <p>United Future Foundation is focussed on facilitating access to education and skills training for disadvantaged youth in poverty stricken and remote areas of Uganda. We strongly believe that education is the first and foremost method to break the cycle of illiteracy, ill health and lack of opportunities. </p>
    </div>
    <div class="rounded" id="sidenav_one">
        <h1>News</h1>
    </div>
    <div class="rounded" id="sidenav_two">
      <h1>Press Releases</h1>
    </div>
    <div class="rounded" id="sidenav_three">
        <h1>Media</h1>
    </div>
    <div id="home_home"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','images/news_down.jpg',1)"><img src="images/news_up.jpg" name="home" width="250" height="188" border="0" id="home" /></a></div>
    <div id="home_about"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','images/about_down.jpg',1)"><img src="images/about_up.jpg" name="about" width="250" height="188" border="0" id="about" /></a></div>
    <div id="home_events"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('events','','images/what_up.jpg',1)"><img src="images/what_down.jpg" name="events" width="250" height="188" border="0" id="events" /></a> </div>
    </div>
    </div>
    </body>
    </html>

    This is much simpler than you would think. You're making it hard work for yourself because you believe css is much more comlex than it really is or need be.
    You rarely need to use relative positioning at all. You are using too many <divs> and redundant css attributes to reach your goals.
    Think of the web as a simple structure of boxes and ino those boxes you place html tags or 'when' needed other <divs> ('when' is the choice word here. In time you will know when and when not to)
    Copy the css and page code below and paste into a new Dreamweaver document. See how much leaner and cleaner the css and html code is.
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=UTF-8" />
    <title>Untitled Document</title>
    <style type="text/css">
    body {
    font-family: "Myriad Pro", "Helvetica Neue", sans-serif;
    p {
    font-family: "Myriad Pro", "Helvetica Neue", sans-serif;
    font-size: 14px;
    color: #000;
    .rounded {
    -moz-border-radius:5px;
    -webkit-border-radius:5px;
    #spot {
    text-align: right;
    #container {
    margin: 0 auto; /* horizontally centers container which has a width */
    margin-top: 15px;
    width: 972px;
    background-color: #999;
    padding-bottom: 25px;
    overflow: hidden; /* a method to clear floated containers within a parent container */
    #banner {
    width: 872px;
    height:210px;
    background-color: #FFF;
    margin: 0 auto; /* horizontally centers container which has a width */
    margin-top: 15px;
    color: #999;
    #banner_left {
    width:509px;
    float: left;
    margin-left: 5px;
    margin-top: 5px;
    #banner_right {
    width:208px;
    height:200px;
    float: right;
    margin-right: 5px;
    margin-top: 5px;
    #banner_name {
    position:relative;
    width:550px;
    height:140px;
    clear: both;
    margin-left: 5px;
    #content {
    margin: 0 auto; /* horizontally centers container which has a width */
    width:872px;
    background-color: #FFF;
    margin-top: 20px;
    overflow: hidden; /* a method to clear floated containers within a parent container */
    #sidenav {
    margin-left:8px;
    margin-top:8px;
    width:136px;
    float: left;
    h1 {
    font-size: 16px;
    color: #000;
    text-align: center;
    background-color: #999;
    padding: 10px 0 10px 0; /* short hand for top/right/bottom/left */
    margin: 0 0 6px 0; /* short hand for top/right/bottom/left */
    #text {
    margin: 8px 0 0 18px; /* short hand for top/right/bottom/left */
    width:700px;
    background-color: #FFF;
    float: left;
    #home_home {
    width:750px;
    height:188px;
    clear: both;
    margin: 10px 0 0 31px; /* short hand for top/right/bottom/left */
    #home_home img {
    float: left;
    </style>
    </head>
    <body>
    <div class="rounded" id="container">
    <div id="spot">you are here</div>
    <div class="rounded" id="banner">
    <div id="banner_left"><img src="banner_uff.jpg" width="450" height="70" /><img src="banner_name.gif" width="509" height="133" /></div><!-- end banner left -->
    <div id="banner_right"><img src="ufflogo.jpg" width="208" height="200" /></div><!-- end banner right -->
    </div><!-- end banner -->
    <div class="rounded" id="content">
    <div class="rounded" id="sidenav">
        <h1>News</h1>
        <h1>Press Releases</h1>
        <h1>Media</h1>
    </div><!-- end sidnav -->
    <div id="text">
    <h2> Breaking the Cycle - United Future Foundation</h2>
    <p>United Future Foundation is an Australian non-government organisation operating in Uganda. UFF is “breaking the cycle” through education. We believe that education is the primary means of creating lasting change, increasing literacy and improving employment. UFF is building a combined primary school and vocational training centre for over 300 students in the Kasanje region of Uganda. </p>
    <p>United Future Foundation is focussed on facilitating access to education and skills training for disadvantaged youth in poverty stricken and remote areas of Uganda. We strongly believe that education is the first and foremost method to break the cycle of illiteracy, ill health and lack of opportunities. </p>
    </div><!-- end text -->
    </div><!-- end content -->
    <div id="home_home"><a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('home','','images/news_down.jpg',1)"><img src="images/news_up.jpg" name="home" width="250" height="188" border="0" id="home" /></a>
    <a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('about','','images/about_down.jpg',1)"><img src="images/about_up.jpg" name="about" width="250" height="188" border="0" id="about" /></a>
    <a href="#" onmouseout="MM_swapImgRestore()" onmouseover="MM_swapImage('events','','images/what_up.jpg',1)"><img src="images/what_down.jpg" name="events" width="250" height="188" border="0" id="events" /></a>
    </div><!-- end home_home -->
    </div><!-- end container -->
    </body>
    </html>

  • Problems with Relation for char field (Forms 9i)

    hi, people
    I have 2 DataBlocks. Every block has the same table of the database as a source.
    I create the relation between this two blocks. I use the primary key as a Join Condition.
    Primary key is the Char(10) field.
    All works OK until the value of this field doesn`t include the sign "_".
    If the PK field doesn`t contain "_" the record will be displayed in DetailBlock else will not.
    Help...
    Thank you

    Hi,
    This problem is due to failuer of navigation of mouse cursore. For more specific solution can you give the error message and error code, So that we can have exact picture. Waiting for error code......

  • What r problems came related ABAP/4 work, when upgration from lower version

    Hi Experts,
    can i know information about upgration.
    what are problems came in ABAP/4 realated development,when upgration from lower version to higher version.
    Best Regards
    jai

    Hi Jayasunderreddy,
    I have gone through an upgradation project, which upgrades from lower version to higher version, there are some problem we could find and here are they:
    1) There were some syntax errors for the variables.
    sloution) we should relate them with new version variables and change them.
    2) There were some FM to be changed according to the version
    3) There were change in BDC also if the objects having BDC then we have to check whether it is functioning well or not, or the best way is to replace the BDC with BAPI, which is independent of version change, so further no problems if at all the version changes.
    Is this information ok..this is what we did for that.
    if you are satisfied then award the points.
    Thanks and regards
    Vipin Das V

  • Win8 Enterprise Install Problems

    Hi,
    i need to install Win8 Enterprise on my MBPr late 2013.
    I read that Bootcamp doesnt support the Enterprise, so i created a bootable USB key via the Windows USB tool.
    So i used the Bootcamp Assistant to create a partition and another usb key with the support files. Then i booted to the Win8 USB and the Installation started. However it failed, because the BOOTCAMP partition was not of the GPT style.
    So i read about it and treid this: i went to Mac OS and disk utility. Then i removed the partition and created a new exFAT BOOTCAMP partition. -> Restart and install Win8 -> format BOOTCAMP partition -> next problem: This computer's hardware may not support booting to this disk, ensure that the disk's controller is enabled in computer's Bios menu

    Guys, i really need some help here. Somebody must have some experience with Bootcamp.
    Is it possible to use a USB boot key that has been created by the Windows tool?

Maybe you are looking for

  • Can not install Itunes on my computer/无法在电脑上安装itunes

    when installing, the message shows that"before configured, a problem is occured". So I can't continue to install itunes on my computer. How can I solve it?I don't want to reinstall my WindowXP. 以前装过itunes,后来卸掉了. 这次安装时出现了"itunes被配置前,安装程序发生错误 安装过程中出错.您

  • [MESSAGE.GENERAL] How can take the actual error text for ABAP proxy error?

    Hi... I'm a ABAPer. I got to create outbound abap proxy for synchronous server proxy and described below. My problem is program can not catch the actual error message when occurred error during send data to XI. The return message is just 'MESSAGE.GEN

  • OCI call starcture for Purchase requisitions  trans NME51N

    Hi, I am looking for any documentation on the OCI call structure ('Web service') for PO/Requisitions. This it allow accessing external catalog via transaction NME51N using ERP 2005 PR/PO. The only documentation I have seen is related to the SRM EBP a

  • Fatal error MapiExceptionNoSupport when moving mailbox

    I am running Exchange 2010 SP3 UR7. I am migrating all Exchange 2010 mailboxes from an older Exchange 2010 mailbox server to a newer Exchange 2010 Server and all have been migrated except for one mailbox. The local mailbox move request for this one m

  • RCA CCMS BI SETUP

    Hi, We see that the below info cube are active (not greyed) in RSA1. Still the program CCMSBI_SETUP_E2E is giving below error: HELP:Attempt to activate object CUBE:0DB6_C01M manually in transaction RSOR. ERROR:Activation of InfoCube 0DB6_C02D failed