RCA CCMS BI SETUP

Hi,
We see that the below info cube are active (not greyed) in RSA1. Still the program CCMSBI_SETUP_E2E is giving below error:
HELP:Attempt to activate object CUBE:0DB6_C01M manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C02D failed
HELP:Attempt to activate object CUBE:0DB6_C02D manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C02H failed
HELP:Attempt to activate object CUBE:0DB6_C02H manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C02M failed
HELP:Attempt to activate object CUBE:0DB6_C02M manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C03D failed
HELP:Attempt to activate object CUBE:0DB6_C03D manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C03H failed
HELP:Attempt to activate object CUBE:0DB6_C03H manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C03M failed
HELP:Attempt to activate object CUBE:0DB6_C03M manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C04D failed
HELP:Attempt to activate object CUBE:0DB6_C04D manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C04H failed
HELP:Attempt to activate object CUBE:0DB6_C04H manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C04M failed
HELP:Attempt to activate object CUBE:0DB6_C04M manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C05D failed
HELP:Attempt to activate object CUBE:0DB6_C05D manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C05H failed
HELP:Attempt to activate object CUBE:0DB6_C05H manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C05M failed
HELP:Attempt to activate object CUBE:0DB6_C05M manually in transaction RSOR.
ERROR:Activation of InfoCube 0DB6_C06D failed
HELP:Attempt to activate object CUBE:0DB6_C06D manually in transaction RSOR.
Please let me know what shall i do. This job shoould be completely successfull.
Thanks,
Rohan

Hi Rohan,
we've exactly the same error :
here's an extract from the log:
Phase I: Aggregating Data
Target Infocube: 0SMD_EA5D
Source Infocube: 0SMD_EA5H
Destination    : BI_CLNT100
Aggregator     :
E2E_HK_AGGREGATE
HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
HK: Error detected by SMD_HK_AGGREGATE
HK: Status :    99
HK: Message:
Create Data Error:The data object could not be created: The type /BI0/V0SMD_EA5D
HK: No new Requests found.
Target Infocube: 0DB6_C01D
Source Infocube: 0DB6_C01H
Destination    : BI_CLNT100
Aggregator     :
E2E_HK_AGGREGATE_MDX
HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
HK: Cube aggregation: SMD_HK_AGGREGATE_MDX
System Failure:
CREATE DATA: The specified type /BI0/V0DB6_C01D2 is no valid data type.
Target Infocube: 0DB6_C01M
Source Infocube: 0DB6_C01D
Destination    : BI_CLNT100
Aggregator
do you have any hint or solution, anyone?
greetings
Andreas

Similar Messages

CCMS BI Setup check

Hi,
I am getting following error during CCMS BI Setup check. Solution Manager 7.0 SP18 (EHP1)
SOLMAN_WORKCENTER -> Root Cause Analysis -> Diagnostics Self Check
Severity:Error
StackTrace:com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of the function 'E2E_SELFCHECK_BI_CONTENT': DYNPRO_SEND_IN_BACKGROUND at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:100) at com.sap.sup.admin.selfcheck.checks.bi.E2eBiContentCheck.process(E2eBiContentCheck.java:51) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:157) at sun.reflect.GeneratedMethodAccessor1398.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785) at java.lang.Thread.run(Thread.java:770)Caused by: com.sap.mw.jco.JCO$AbapException: (126) CALL_CCMSBISETUP_CHECK_FAILED: CALL_CCMSBISETUP_CHECK_FAILED at com.sap.mw.jco.JCO$Client.execute(JCO.java:3429) at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:74) ... 11 more
Text:Cannot execute this check !
If you know any resolution for the same, plesae let me know.
Thanks for your help.
Regards,
Nilkanth

I have a similar problem with a different error message.
StackTrace:com.sap.sup.admin.abap.rfc.exception.RfcExecutionException: An exception occured during the execution of the function 'E2E_SELFCHECK_BI_CONTENT'. at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:113) at com.sap.sup.admin.selfcheck.checks.bi.E2eBiContentCheck.process(E2eBiContentCheck.java:51) at com.sap.sup.admin.selfcheck.fwk.check.AbstractCheck.processImpl(AbstractCheck.java:157) at sun.reflect.GeneratedMethodAccessor866.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:62) at java.lang.reflect.Method.invoke(Method.java:391) at com.sap.smd.server.exec.asio.AsioInvocationHandler$1.call(AsioInvocationHandler.java:87) at com.sap.smd.server.util.concurrent.FutureResult$1.run(FutureResult.java:90) at com.sap.smd.server.exec.asio.AsioInvocationHandler$AsioRunner.run(AsioInvocationHandler.java:274) at com.sap.smd.server.exec.TaskRunner.run(TaskRunner.java:45) at com.sap.smd.server.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:785) at java.lang.Thread.run(Thread.java:763)Caused by: com.sap.mw.jco.JCO$AbapException: (126) CALL_BI_CONT_CHECK_FAILED: CALL_BI_CONT_CHECK_FAILED at java.lang.Throwable.<init>(Throwable.java:56) at java.lang.Throwable.<init>(Throwable.java:67) at com.sap.mw.jco.JCO$Exception.<init>(JCO.java:1117) at com.sap.mw.jco.JCO$AbapException.<init>(JCO.java:1366) at com.sap.mw.jco.JCO$Client.execute(JCO.java:3430) at com.sap.sup.admin.abap.rfc.function.RfcFunction.execute(RfcFunction.java:74) ... 11 more
Text:Cannot execute this check !
I tried to find the infocube SolutionManager but it does not seem to be there.
Could you please let me know which activation you mean?
The solman_setup stuff has all been executed successfully.
Regards,
Bastian

CCMS alert setup on sxmb_moni

Hi Guru's
Is there any way i can setup a alert on sxmb_moni .If the messages are stored more that 100 in
Q. Need to Raise a alert to team from CCMS.
Thanks
Raj

Raj and Phil,
Alerts can be set up through CCMS by choosing required monitor sets and configuring auto reaction methods (RZ20). Most of this is pre- defined. Follow the guide below for the same.
http://help.sap.com/saphelp_nw04/helpdata/en/28/83493b6b82e908e10000000a11402f/frameset.htm
rgds
Ven

Queries regarding CCMS monitoring setup

Hi All,
We have configured the CCMS alert monitoring setup for our system and thatu2019s running fine.
We have some queries:
Is it possible to get the availability of the physical server (windows) using CCMS ping?
We have configured it on high availability server and registered the SAPCCM4x and CCMSPING agent to both nodes but facing issue with file system usage monitoring, we are not getting the data for virtual drive, Example: we are getting the data for only 3 drives C, D, S but we are not getting data for other drive like G, Z, F..
We have checked also the ST06 for the file system there also we are getting the same data.
Please suggest
Regards,
Harish

Dear Mansoor
Since your questions are more related to configuration, I would suggest to go through the attached document especially the topics "Email Infrastructure" "Workflow" (defining routing logic for emails) and "Chat infrastructure. Here you will find information alongwith screenshots.

Dump CREATE_DATA_UNKNOWN_TYPE in Program E2E_HK_CONTROLLER

Hi solman-experts,
we've exactly the same error as in this thread Re: RCA CCMS BI SETUP
program created every day 31 short dumps which you can find in the following log:
(extract from the log from program E2E_HK_CONTROLLER)
Phase I: Aggregating Data
Target Infocube: 0SMD_EA5D
Source Infocube: 0SMD_EA5H
Destination    : BI_CLNT100
Aggregator     :
E2E_HK_AGGREGATE
HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
HK: Error detected by SMD_HK_AGGREGATE
HK: Status :    99
HK: Message:
Create Data Error:The data object could not be created: The type /BI0/V0SMD_EA5D
HK: No new Requests found.
Target Infocube: 0DB6_C01D
Source Infocube: 0DB6_C01H
Destination    : BI_CLNT100
Aggregator     :
E2E_HK_AGGREGATE_MDX
HK: Calling SMD_HOUSEKEEPER at BI_CLNT100
HK: Cube aggregation: SMD_HK_AGGREGATE_MDX
System Failure:
CREATE DATA: The specified type /BI0/V0DB6_C01D2 is no valid data type.
Target Infocube: 0DB6_C01M
Source Infocube: 0DB6_C01D
Destination    : BI_CLNT100
Aggregator
the datatypes (e.g.: /BI0/V0DB6_C01D2 ) are not
in data dictionary and not defined in the corresponding includes - but
is this the real error or is it missing/false configuration in solman?
do you have any hint or solution?
greetings
Andreas

Hi,
i faced the similar problem that the following 'CREATE_DATA_UNKNOWN_TYPE' occured hourly.
User ;SMD_RFC
Runtime Errors;CREATE_DATA_UNKNOWN_TYPE
Exception ;CX_SY_CREATE_DATA_ERROR
Short text
CREATE DATA: The specified type "/BI0/V0CCMSAEXE2" is no valid data
type.
SAP support told me to implement Note 1334507 and re-run the report CCMSBI_SETUP_E2E, and the problem solved.
This might be different from your case.
I hope this would help you.
Regards

BPM - Requirement for CCMS Setup?

Hi all,
In the BPM setup guide, it says: "The Computing Center Management System or CCMS Alert Monitor (transaction /nrz20) provides the underlying monitoring infrastructure for Business Process Monitoring."
Is there any further information on exactly what CCMS Setup is required at a minimum in the Solution Manager and in the Monitored system for BPM to function correctly?
I read the technical prerequisites which are described in SAP notes 784752 - "BPMon in SAP Solution Manager - Prerequisites" and 521820 - "Availability of Business Process Monitoring". The first note does not reference CCMS, and the second one only makes reference to it if you want to use "CCMS Monitors" in BPM.
Thanks for any guidance on this,
Regards,
John

Hi JD
To use CCMS monitoring in BPMon, 1st, please implement Note 1293668 as described in Note
521820. This note fix the problem of CCMS monitoring related problem.
>Description of note 521820
>(d) CCMS Monitor
>If you plan link any CCMS monitors from the managed systems into
>Business Process Monitoring implement SAP Note 1293668.
About the procedure, you just need to copy and past MTE from RZ20 of related system.
In more detail, please refer to the document in below.
http://www.service.sap.com/bpm
->Technical information
->->Setup Guide - Interface Monitoring
Page 78 describe the steps on CCMS monitoring setup.
(Originally this description is for one of the monitoring topic for PI area.
Create MTE for PI and by using CCMS monitoring of BPMon, include the MTE to the BPMon.
But the page above exactly describe the step that you need to do for CCMS monitoring.
This apply for your case as well).
Best Regards
Keiji Mishima

CCMS ALERT QUESTION

Hi,
I am using XI 3.0, and trying to setup CCMS alert setup...
I have 2 quesitnos: first
I done XML alerts using ALRTCATDEF and create alert XDV_XML category, then RWB define add roles in there, all XML messages comes in mail which is good!!!
but when I goto RZ20 and find SAP CCMS Monitor Template and double click under "Exchange Infrastructure" its shows there but empty or disable or white color can't see anyting under that .... WHY?
2nd question; I am tyring to create CCMS alert goto RZ21 click mothod -> display overview -> select mothod CCMS_Online_Email -> copy this mothod to my name like CCMS_TRAVIS
In Execution tab -> type of call alerady select funcation module and call selected: SALO_EMAIL_IN_CASE_OF_ALERT
In Control Tab -> Periodically in dialog process (shot running program) selected
In Parameter Tab -> SENDER: my user name, RECIPIENT: my eamil address, RECIPIENT TYPE: U
In Release Tab -> selected 'auto reaction mothod'
what i do next, what kind of alerts will show there? and how? and when? and if i want show thease alert for more user how do i setup?, and why only CCMS_OnAlert_Eamil only ?,
Please can you give me answer in your words, I have lot of URL but not help full
Thanks a lot

Hi, there
I already have that doc. thanks a lot anyway!!! ok if I am following this doc.
/people/sap.user72/blog/2005/11/24/xi-configuring-ccms-monitoring-for-xi-part-i
Step 3 : Creating a System Group for SAP Exchange Infrastructure
When I goto Rz21 and click "Technical infrastructure" then "configure central system" then "maintain system group" and click "Maintain gropus" then create Groups" its asking me new entry put "ExchangeInfrastructure_Systems" now how its look like :-
System Groups for Alert Monitor
46C_Systems
620_Systems
640_Systems
700_Systems
<SYSTEMS_WATCHED_BY_4XAGENTS>
ADABAS D_Systems
CSM_Known_Systems
INFORMIX_Systems
J2EE_Systems
ORACLE_Systems
ExchangeInfrastructure_Systems (This entry has been created but under oracle_system and with not yellow folder)
Note: when I goto rz20 and click CCMS_Monitor_template it does show Exchange Infrastructure but grayedout nothing display under exchange infrastructure.... WHY?
please some advised
Thanks

RCA/KPIScript.jar SAP BusinessObjects XI 3.1

Hi,
We would like to set up for End-To-End Root Cause Analysis for SAP
BusinessObjects Enterprise XI 3.1. We have Solution Manager 7.0 EHP1
SP26 (Windows) and BOE XI3.1 SP3 installed (Windows). We have followed
as in End-to-End
Root Cause Analysis: System Landscape Setup Guide, available at:
https://websmp130.sap-ag.de/sap
(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=976054 . End-To-
End Analysis shows u201DNo Applicable Data Foundu201D. Looking through u201CTroubleshooting Guide End-To-End Workload
Analysisu201D and u201CEnd-To-End Diagnostics Trouble Shooting Guide missing
data in service session from BI/CCDB2u201D it seems as if Extractor FWK for
system BOD works for the system, extractors are scheduled and running
(green)/Screen copy in attachment. TA Listcube, Infocube 0SMD_PE2H for
Sysid: BOD shows data from today)/Screen copy in attachment. We too
have looked through Oss note Note 1357901 - RCA: Managed System Setup
for SAP BusinessObjects Enterprise.
SMDAgent at the BOE host has been installed, registreded and attached
successfully and the agent setup completes successfully BUT with a
warning: "
[Wilyhost Agent] Wilyhost Agent setup finished successfully with
limitations. Data of at least one action is not available in Enterprise
Manager(corpit43:6001).
[E2E RFC] The E2E Extractors were succesfully activated for
cphgit49/BOD/49 (cphgit49.ad1.danisco.com) (Platform Processing
Services, ADAPTIVE JOB SERVER, Crystal Report Server, INPUT FILE
REPOSITORY SERVER, Output File Repository Service, Central Management
Service, JOB SERVER)
[E2E RFC] The E2E Extractors Batchs were succesfully started for
cphgit49/BOD/49 (cphgit49.ad1.danisco.com).".
Looking at Extractor FWK Administration, extractor log for the BOE
system alle extractors seems to run successfully ( all green lights).
1626902 - Incomplete EarlyWatch Alert report due to SCRI extractor
timeout implemented (Validity: 30.01.2012 - active ).
Testing from RCA, Host Analysis, OS Command Console alle retreives-
/entries
except for DumpKPI's works fine ref. screen copy in attachment
For DumpKPI's we first had a timeout after 9 minutes ("default")
(SMDAagentApp log), then we followed up at timeout parameters and now
we do not get a timeout but the execution
seems to hang itself after some times and we
get the following error when trying to logon to BOE CMS or as error
message in SMDAgentApplication.log ...:"@CPHGIT49.ad1.danisco.com:6400,
kind cms which host
service null, are down or disabled".
SMDAgentApplication.log
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <?xml version="1.0" encoding="UTF-8"?>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <KPI>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line <Error>All the servers with CMS
CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400,
kind cms which host service null, are down or disabled
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line </Error>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line </KPI>
Feb 1, 2012 9:48:10 AM [Thread[boe_kpis,5,main]] Warning
com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine():
ignoring metric line
Thanks in advance for any input for this issue.
Hanne

Hi Diego,
Thanks a lot for your reply on this issue. The BOE is XI 3.1 SP3 HF2.
We have followed up as in the notes below.
Note 1357901 - RCA: Managed System Setup for SAP BusinessObjects Enterprise.
Note 1377938 - BOE extraction script for Solution Manager EhP1
In RCA, Host Analysis, OS Command Console commands as DumpServerAps, DumpServerJobserver, DumpServerCacheServer, DumpServerPageServer, DumpServerEventServer,
DumpServerFileServer, DumpServerWebiServer and DumpAlinXML return values ok, but when executing the command DumpKPIs it takes a long while and it then shows same output as seen in SMDAgentApplication.log "<Error>All the servers with CMS CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400, kind cms which host service null, are down or disabled" ref. below.
RCA, Agent Administration, Application Configuration, com.sap.smd.agent.application.remoteos settings,
ENV_HOST_BOE_CMS = CPHGIT49:6400
ENV_HOST_BOE_CMS_PWD = ****
ENV_HOST_BOE_CMS_USR = administrator
ENV_HOST_BOE_DIR = D:\Program Files\Business Objects\
SMDAgentApplication.log shows,
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <?xml version="1.0" encoding="UTF-8"?>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <KPI>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line <Error>All the servers with CMS CPHGIT49.ad1.danisco.com:6400, cluster @CPHGIT49.ad1.danisco.com:6400, kind cms which host service null, are down or disabled
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line </Error>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line </KPI>
Feb 15, 2012 9:32:02 AM [Thread[boe_kpis,5,main]] Warning    com.sap.smd.wily.hostagent.action.AbstractEpaAction - parseLine(): ignoring metric line
Hanne

MDM monitoring setup

Hello All,
I'm in the process of monitoring setup for my MDM environment
MDM 5.5
SP6 - patch3
I've gone through some notes for SMD setup, but need more information.
Also, need information on CCMS monitoring setup for MDM.
Please let me know if any of you have the step-by-step kind of document for MDM monitoring setup.
Any kind of pointers to startup will be very helpful.
Thank you.
Regards,
Bhaskar.
Edited by: Bhaskar on Jun 3, 2009 12:16 PM

Hi Bhaskar,
Please follow the links below for information :
Root Cause Analysis for SAP MDM 5.5 SP06 with SAP Solution Manager Diagnostics
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/3065806b-dce5-2a10-1493-c933ac8daca5
End-to-End Root Cause Analysis for SAP NetWeaver MDM
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/2034e620-7603-2b10-ff84-8392e4c1acb1
Monitoring Detailed Overview
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/30a4d9d4-804a-2a10-4985-da100d564a1b
End-to-End Solution Operations: System Administration, System Monitoring, System Landscape Management
https://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/908c130e-5ad2-2b10-ad92-cbf7c3820e07
Hope this info helps.
Thanks and Regards
Nitin Jain

CCM won't register IP Phone

Hi I'm running CCM4.0(2a)sr2a. When I attempt to register any phones(7960) After the phone goes thru VLan Config etc.. I end up with Registration Rejected and it just hangs there? Can anyone help me?
Thank you in advance

Do you have your CCM server setup for auto registration? Did you preconfigure your phone in CCM before booting? I ran into this problem recently and found I hadn't turned on auto registration on my cluster. I set it to 25 extensions. Then I just search for the extension and make any necessary changes. Just remember to nuke the UnassignedDNs every now and then, so you don't use them all up.

SMD Issue: A remote host refused an attempted connect operation

Hi all,
I am installing SMD agent 7.2 on managed system which is ABAP+JAVA 7.0. I Have successfully installed SMD agent 7.2 on Managemd system. Now, i need to configure its Introcope agent for JAVA system in sOlution manager. when i go to RCA->MAnaged system->setup wizard, it successfully configures it in further screens.
However, wehn i go to RCA->MAnaged system->INtroscope agent and select the respective JAVA SID for which I installed sMD agent, it does not display the server node of jAVA for that system. Also when I check in the logs of sMG agent in the managed system, I get the below error;
location:/usr/sap/sMD/SMDA97/log/SMDAgentApplication.0.log
Error: A remote host refused an attempted connect operation
Can anyone help me solving this issue?
REgards,
FAisal

Hi Guilherme,
Thanks for your reply.
I have checked in agent administration screen. The agent is successfully assigned. I only see a problem while solman talking to the managed system on P4 port. I believe I have to open or do some administration of this P4 port. But where I am not sure.
I mean while installed another SMD Agent on another J2EE server and it worked instantly!
Can you help?
Regards,
Faisal

System Landscape Management Overview - no CCMSPING data available!

Hi All
We are currently trying to fully configure monitoring for our SAP landscape Java and ABAP so it can be viewed in the Work Center Web page.
However, on the 'System Landscape Management Overview' we have the message 'no CCMSPING data available' for all of our systems, even though we have CCMS ping setup.
Does any one know what I can check?
Thanks
Phil

Hi Vital
I have gone through those setting in RZ20, and RZ21 however we do seem to have a multitude of red and I am note sure where to start getting them set up or actioned. I have the following marked as red:
Transaction RZ20 "SAP CCMS Technical Expert Monitors -> Selfmonitoring CCMS Agents", the CCMSPING should show green.
CSMS Selfmonitoring -> Tool Dispatching -> Messages ->
             Background method dispatching not possible - job does not exist
CSMS Selfmonitoring -> Central Performance History ->General CPH status information
        Data collection message           No central data collection (hourly values) for system SMP Reorganization message            The CPH reorganization has not been executed for a long time
MoniInfra_ARMIDALE_SMP_00 -> Tooldispatching (short running tasks)
        Messages             Cannot start tool CCMS_MSS_APP_SLOW_SQL
STARTUPTOOL_00026    Startup method error: CCMS_MSS_APP_SLOW_SQL (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00033    Startup method error: CCMS_MSS_PERF_CPU (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00034    Startup method error: CCMS_MSS_PERF_DATACACHE (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED
STARTUPTOOL_00035    Startup method error: CCMS_MSS_PERF_IOSTATS (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00036    Startup method error: CCMS_MSS_PERF_PROCACHE (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
STARTUPTOOL_00058    Startup method error: WS: SRT_Data_Collector (method dispatcher: SAP_CCMS_STARTUP_TOOL_DP, Time: 21.05.2008, 09:24:09, Status: LAUNCHED)
SMP\CCMS database self-monitoring\... -> Database self-monitoring
        SQL Server    create_mss_space_mgmt: function call SALI_MT_GET_TID_BY_NAME failed with exception NAME_NOT_FOUND. Affected MTE: ., Red 21.05.2008 , 09:24:09
I think I will need to get this fixed first - I am just suprised we have all of these errors when we have only installed the CCMSPING service?
An help or advice would be great
Thanks
Phil

Cant see servers for a cluster in cmc

I have a distributed windows environment running boe xi3.1. The cluster established in CCM and setup in the tomcat web.xml. I can log into the cluster but when I go into the cmc I see all servers for server A but only the cms server for server B ? All are running and enabled.
I dont see what I am missing in the setup
Bryan

Denis. I installed two individual stand alone xi3.1 windows installs. then clustered through xml and ccm
When I log into cluster and go to servers I see all servers for server A and only the cms server for server B.
I only see one node that points to Server A.
I am tried updating objects on Server B but no success.
I am going to try and add a new sia on Server B and redirect.
Do you think this is expected behavior as I did not originally install expanded installation on Server B ?
thanks
Bryan

CCMSBISETUP

Hi Friends,
I want to configure the CCMSBISETUP in Solution Manager, it is connected to all other Production servers, i.e. BI, EP,R/3 etc...Now we want to implement "Computing Center Management System" for all below InfoProvider.
CPH 15 Minute Performance Values                       0CPH_15M
CPH Cube with Virtual Key Figures                       0CPH_VRKF
CPH Daily Performance Values                       0CPH_DAY
CPH Hourly Performance Values                       0CPH_HOUR
CPH Minute Performance Values                       0CPH_MIN
CPH: Minimums and Maximums                       0CPH_MIMA
Performamnce Data, Weekly Average Values            0CCMWEEK1
Performamnce Data, Weekly Average Value              0CCMWEEK2
Performance Data, Daily Average Values                  0CCMDAY2
Performance Data, Daily Average Values                      0CCMDAY2
Performance Data, Hourly Average Values               0CCMHOUR1
Performance Data, Hourly Average Values               0CCMHOUR2
Performance Data, Minute Values                      0CCMMIN1
Performance Data, Minute Values                      0CCMMIN2
Performance Data, Monthly Average Values             0CCMMNTH1
Performance Data, Monthly Average Values             0CCMMNTH2
Performance Data, Quarter-Hourly Values                0CCMQTR1
Performance Data, Quarter-Hourly Values                0CCMQTR2
Performance Data, Virtual Key Figures                      0CCMVRKF
I saw all SAP Notes
Note 979581 - Installing and configuring the CCMS BI Content.pdf
Note 1119686 - CCMS Reporting Suite scenario.pdf
Note 1321267 - DB statistics for 0CCM InfoProviders.pdf
I exetecued CCMSBISETUP in Solution Manager, it is taking taking more then 17 hours, and there is no l
Thanks
Ganga

Hi,
Are you getting any specific error ? or you stuck with the configuration wizard itself?
please check the three wiki doc provided by Jim Spath
[Central Performance History with BI |http://wiki.sdn.sap.com/wiki/display/SMSETUP/CentralPerformanceHistorywithBI]
under there are three titles please check al the three
CPH - Running CCMS BI Setup
CPH - Querying CCMS BI
CPH - Verifying CCMS BI Load
Thanks,
Jansi

Configuring SolMan for BPC

Good morning,
I have to configure Solution Manager to connect BPC system.
SAP suggest us to do these steps:
- Management Console - BPC tool
- Solution Manager Diagnostics u2013 install Agent on BPC
- DBA Cockpit u2013 connect BPC Data Base server
Could you please suggest to me any link where I can find documentation or wiki page?
Many Thanks.

Hello Alessandro,
You can find some documentation here at this link [E2E RCA System Landscape Setup Guide|https://websmp107.sap-ag.de/~form/sapnet?_FRAME=CONTAINER&_OBJECT=011000358700000074392009E] See section 4.46.
Hope this information helps.
Regards,
Paul

RCA CCMS BI SETUP

Similar Messages

Maybe you are looking for