Windows xp 32 bit system versus Windows 8 64 bit system

     I currently run my photoshop cs6 on a windows xp 32 bit sytem.  I want to buy a new system with windows8 64 bit system.  Will my version of photoshop run on a new system or would I have to buy a new version of it?

The license you have for Photoshop will run on your Windows 8 system.  Remember to deactivate it on your XP system if you are retiring it, so your activation will be available for your use on the new one.
Good luck with your new system.  Windows 8 might be a seem like a bit of a shock as you move directly from XP, but it can be tweaked and augmented with 3rd party software to be pretty decent for desktop work.  I've written a whole book on how to do that, and I'm presently running a well-tuned Windows 8.1 setup on my desktop.  Photoshop likes it.
-Noel

Similar Messages

  • After rebooting my Windows Vista 64 bit system, could not access iTunes; after uninstalling I tried reinstalling, but it has been running for more than 24 hrs. Should I cancel installation?

    I had been updating my Windows Vista 64 bit system and as a result of a problem, had to reboot my system. Afterwards, I was no longer able to access iTunes.  I got a message stating that there was a problem with some of the files associated with the application.  A phone rep at Apple's Customer Service provided me with emails linking instructions on completely uninstalling and reinstalling iTunes. I did the uninstall, then checked for lingering iTunes files and couldn't completely remove some, but tried intalling the latest version of iTunes. It has been running for roughly 24 hours.  The status bar is green all the way across, and when I try to cancel, I get the following message: "Are you sure you want to cancel iTunes installation?"  I keep hitting "no," but am staring to wonder if there is a problem with the install.  Should it take this long if I have roughly 134 gigs of music?  I can still see the music in my computer's C drive, so I am worried that there is an error, perhpas because I didn't clear out all the lingering C:\Program Files\Common Files\Apple\ and all the lingering C:\Program Files\iTunes\.  Any thoughts?

    It is not just the HP. I have 3 HP computes and 2 Dell computers. 2 of the HP and 1 Dell suffer the iTunes internet block. Took me a while to figure it out also. But, the one thing that is different on the Dell, is that I can leave iTunes installed and not open it and everything works. As soon as I open it, internet access goes down. BUT secure sites (https:) works fine.

  • Unable to install HP Laserjet P1005 on a Windows 7 64-bit OS system

    I have attempted to install both the full package and just the driver for an HP Laserjet P1005 local printer to my personal PC which I updated the OS to MS WIndows 7, 64-bit version numerous times and I have been unsuccessful each time. On each attempt to run the installer, whether it be the full version or just the driver, and you come to the point in the installation process where you are to plug in your local printer's USB cable to your PC I keep encountering an error message indicating that the USB device is not recognized. A further investigation reveals that there is in fact an unknown device. I click on this and I encounter a Microsoft generated message which indicates the following information - Windows has stopped this device because it has reported problems. (Code 43)
    The following Microsoft web site - http://support.microsoft.com/kb/310123 
    has the following Recommended resolution
    One of the drivers controlling the device notified the operating system that the device failed in some manner.
    If you have already run the Troubleshooting Wizard, you might want to check the hardware documentation for more information about diagnosing the problem.
    Well, I went through all of the above recommended actions and I got nowhere. I went back on the web and did some further research. This time I found the following information at the following HP web page -http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=bi-59850-1&lc=en&dlc=en&cc=us&lang=en&os=1060&product=3435668
    This was a link to an HP web page which pertained to a so-called repair utility software that was for an HP Laserjet P1000 and P1500 Series Plug and Play Recovery Utility.I tried this but it has not rectified my problem installing the driver for my local printer.If you have the magical solution to this problem I would appreciate it if you could provide it to me. Thank you.
    <text removed for privacy>
    Message Edited by WendyM on 11-29-2009 08:25 PM

    WendyM: I seem to have EXACTLY the same problem...
    - New Sony Vaio with Windows 7 Home Basic 64bit factory installed
    - HP LaserJet P1005 as a local printer
    - P1005 was first installed on the Vaio using the original install CD and sort of worked
    - worked OK for the installing user but only intermittently for the other user
    - both users had problems with the printer queue locking up in various situations (only solution was to reboot)
    - decide to try and update the installation of the printer
    - downloaded both the driver files you speak of from HP
    - small Plug and Play file (c4Mb) got into endless loop when trying to pre-install drivers and had to be killed
    - large full installation file (c167Mb) also failed to install properly
    - tried uninstalling and rebooting various times after various failed attempts to get this full package to work.
    - situation now is that the P1005 is simply uninstallable on the Vaio but continues to work fine on two XP machines (see below)
    - a detail: when the P1005 is plugged into any machine (Vaio or XPs) USB reports that it could run faster if it was on a USB 2.0 port
    - this seems to be a strange message on a 2010 Sony Vaio which obviously has USB 2.0 ports
    - stranger yet, the XPs are completely unaffected by this message, and print to the P1005 normally, as they always have
    The XP machines:
    - One XP machine is an old 2006 HP Pavilion
    - The other XP machine is a 2009 Acer netbook
    - both machines with their original factory installed XPs, and both regularly updated
    - the P1005 is a local printer on all machines
    - each machine is plugged into it when printing is needed and the 2 XP machines always connect and print, regardless of the USB speed message
    - the P1005 even works from the XPs via an unpowered USB physical hub with a USB mouse connected as well
    HP really seem to have gotten themselves into a rather shameful mess over their printer drivers. In the year 2010 it seems insane that plugging a printer into a computer is so stunningly complex.
    Indeed HP seems to be going rapidly backwards. The Vaio was bought to replace the old 2006 Pavilion (an excellent machine which has never put a foot wrong despite the most intensive use, and which continues to work fine if a little slowly in comparrison to the newer machines) because when we saw the HP replacement we were so repelled by its awful ergonomics, physical appearance, and ragged construction (raw metal edges round the front corners!) in comparisson to the Pavilion that we didn't need any convincing to buy the wonderfully constructed Vaio. Now we discover that a printer that works fine on XPs is unusable on Windows 7. A strange form of progress indeed.
    For many years I revered the quality of HP products. No longer I'm afraid. The Pavilion became a Vaio. I wonder what will take the place of the P1005 (I am actually being extremely restrained about the P1005 because it compares miserably with its sturdy predecessor: our sadly missed HP LaserJet 1010),
    Regards
    cricobr

  • I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation."  I am the sole user- please help.

    I am trying to download iTunes on my new desktop computer (Windows 7, 64 bit).  It starts installing, and then stops with the message- "The System Administrator has set policies to prevent this installation." This is a stand alone computer and I am the sole user.   Please help.

    This is a Microsoft Windows Issue.
    From a MS Support Engineer:
    "Hi,
    ·        Is the computer on a domain?
    ·        Is the issue isolated to only this software or you get the same error message with other software’s as well?
    Try the steps below and check if it helps.
    Step 1:
    Run the software setup file as an administrator and check if it helps.
    a. Right click on the setup file of the software that you are trying to install.
    b. Select “Run as administrator”.
    Step 2:
    Temporarily disable the antivirus software running on the computer and check if you are able to install the software.
    Disable antivirus software
    Warning:
    Antivirus software can help protect your computer against viruses and other security threats. In most cases, you shouldn't disable your antivirus software. If you have to temporarily disable it to install other software, you should re-enable it as soon as you're done. If you're connected to the Internet or a network while your antivirus software is disabled, your computer is vulnerable to attacks.
    Step 3:
    a. Click Start, type "Local Security Policy" (without quotes) and press enter.
    b. Click on Software Restriction Policies.
    c. In the right pane, double click on the "enforcement".
    d. Select “All users except local administrators”.
    e. Click Ok and restart the computer and check if the issue is fixed."

  • Having a problem with wireless connection. On my Windows XP 32 bit system and a 6510 printer, initi

    On my Dell Latitude D620, Windows XP 32 bit system and my 6510 printer wireless connection (Linksys EA4500) , everything works fine after the computer is booted.  After a period of time (usually overnight), I lose connection to the printer (the scanner icon with a red x is shown on my Windows task bar and I can't print.  Ran Windows Fix and the HP fix programs.  The only thing that solves it is to reboot the computer.  A second symptom is that my IE8 stops connecting to the internet at the same time (gives a 'waiting for' response that never changes).  Firefox still connects OK when this is happening.  So I suspect the problem isn't with the printer, but with my Windows set up.  It is a fresh XP SP3 install (hard drive crashed, but it happened before also).  I reset IE, checked my proxy, no malware, happens with or without firewalls and security programs.
    Hoping that someone else has run into this problem.  Been all over Google, and the IE doesn't work / Firefox works is fairly common, but none of the fixes helps. 

    If you want you can reload Firefox 4.0 or the last "old" version is 3.6.16 and is available here:
    http://www.mozilla.com/en-US/firefox/all-older.html
    Just reinstall your choice of FF. The bookmarks are in a different directory and are NOT overwritten. Some of the Add-ons that worked in 3.6 DO NOT work with 4.0, pay attention and head any warnings when you start 4.0.
    I had to disable extensions: Flashblock and WOT
    Firefox SafeMode? - A troubleshooting mode.
    1.You can open the Firefox 4.0 SafeMode by holding the Shft key when you use the Firefox desktop or Start menu shortcut.
    To exit the Firefox Safe Mode, just close Firefox and wait a few seconds before using the Firefox shortcut to open it again.
    For more help, see this: http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes
    Hope this helps you out.
    Feedback is appreciated especially if this helps you out.

  • HT1349 Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."

    Initially iTunes would not run although it had been running quite well up until now. Suddenly received this error on PC start-up "The program can't start because MSVC80.dll is missing from your computer. Try reinstalling the program to fix this problem." Research on Net pointed me to iTunes as the issue. Tried to start iTunes and received that message again. Tried installing latest version of 64-bit iTunes and received the subject message part way through the install: Trying to install latest iTunes for Windows 7 64-bit. Keep getting this error message "Service 'Apple Mobile Device' (Apple Mobile Device) failed to start. Verify that you have sufficient privileges to start system services."
    iTunes has been running great on this PC for years. What's up?
    Ron

    See Troubleshooting issues with iTunes for Windows updates.
    tt2

  • Unable to install iTunes 10.5.0.142 on Windows 7 64 bits system

    I am not able to install the latest version of itunes, version 10.5.0.142, released by Apple last week.
    I think it is important to note that there are three pending updates on my system (Windows 7, 64 bit), which keep on failing again and again no matter what the mode of update (manual via microsoft website or automatic via the program provided by microsoft). These are:
    1. Security Update for Windows 7 for x64-based Systems (KB2556532)
    2. Security Update for Microsoft Visual C++ 2005 Service Pack 1 Redistributable Package (KB2538242)
    3. Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243)
    The methods that I have tried to install the latest version of itunes (all have failed as of now):
    a. Automatic via the previous version of itunes. This tries to download and install itunes in parts, but ultimately leads to the error originally pointed in this thread. Failed.
    b. Uninstalling the previous version of itunes completely as mentioned here: http://support.apple.com/kb/HT1923 and also using Microsoft Fixit and then trying to install the new version. Failed.
    c. Uninstalling all but apple software update, and then trying to update manually from the software update file available in c:\Program Files (x86)\Apple Software Update folder. Failed.
    d. Uninstalling all the versions of visual c++ (2005 and 2008), and then trying to install the latest version of itunes. Then re-installing the latest versions of c++ (2005, 2008 and 2010) along with updates but three as pointed above, and then trying to install the latest version of itunes. Failed.
    e. I have tried various permutations and combinations of keeping the firewall, antivirus and even the internet off and on. Failed.
    The combination of errors that I have received:
    - An error occurred during the installation of assembly ‘Microsoft.VC80.CRT,version=“8.0.50727.6195″,type=“win32,publicKeyToken=“1fc8b3 b9a1e18e3b”,processorArchitecture=“x86”. Please refer to Help and Support for more information. HRESULT: 0x80073712
    - Error 7 indicating installation of microsoft .net framework 4.0 for me (http://support.apple.com/kb/TS3074) and
    - Error 2 - "Apple Application Support was not found. Apple Application Support is required to run iTunes. Please uninstall iTunes, then install iTunes again. Error 2 (Windows error 2)
    However, I have seen on some websites that people have been able to install the latest version of itunes on their windows 7 64 bits system (surprising, but yeah).
    I would appreciate any pointers as to:
    ?1 How do I install the latest version of itunes on my system.
    ?2 If the steps are not included in the solution to ?1, how do I update 1., 2., and 3. mentioned above.
    ?3 If I am able to install itunes 10.5.0.142 on my windows 7 64 bit, would I be able to successfully my iPad2 to iOS5?
    Many thanks.

    I should have posted this earlier, but anyway. I restored my laptop to factory version after backing up any useful data, and the first thing I the laptop was restored was connect to the internet, download and install the latest version of iTunes. And Bingo! It worked.
    Apple helps you find Original Sin with the Windows.

  • WIndows 7 64-bit system printing to a Windows 2000 server configured as a print server

    Is there any way to configure a new Windows 7 64-bit computer to use a Windows 2000 server configured as a print server ?
    The printer that I would like to connect to is an HP 4240n LaserJet. I appears that there is only a 64-bit Universal Print Driver available. The server currently uses HP 32-bit PCL5e or PCL6 drivers for all other connected computers. Connection is through a Hewlett-Packard Network Port, using DLC/LLC transport for the embedded 4240n print server.  
    Installing  the HP 64-bit UPD to the WIndows 7 64-bit system, and then attempting to redirect the local port to the Win2k network print server has not worked.
    Thanks for any advice.

    Hi:
    See if this works...
    Run msconfig.
    In the System Configuration screen, Boot tab, Advanced Options, if there is a check mark in the box next to Maximum memory. Remove that checkmark and save your changes.
    Reboot and hopefully Windows recognises all the Ram ( minus the reserved ) after restarting.
    Please give that a try, and post back and let us know if that frees up some system memory for you.
    Paul

  • Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit).

    Firefox (latest and greatest) has been giving me synaptics scroll wheel errors. It has worked fine up until 3 days ago. I have the latest driver for the touch-pad, from synaptics, for my toshiba laptop L505D-S5986. Operating system is Windows 7 (32-Bit). Have tried it on other browsers, and works as it should. The last add-on i installed for Firefox was "Fox Filter" so my kids couldn't accidentally stumble onto sites of immoral tastes. I can't see why that would have any effect, but it was the last update/add-on i installed to the browser, but even then,.......it was working fine for a week and a half afterwards until now. Please help.
    == This happened ==
    A few times a week
    == A week and a half after i installed Fox Filter. ==
    == User Agent ==
    Mozilla/5.0 (Windows; U; Windows NT 6.1; en-US) AppleWebKit/532.5 (KHTML, like Gecko) Chrome/4.1.249.1064 Safari/532.5

    Hello Steve.
    You may be having a problem with some extension or plugin that is hindering your Firefox's normal behavior. Have you tried disabling all add-ons (just to check), to see if Firefox goes back to normal?
    If you detect a faulty add-on, you should contact its author for support. You can also search for alternatives. Site filters are relatively common in the add-ons gallery: [http://addons.mozilla.org addons.mozilla.org].

  • How can I install photoshop elements on a 64 bit windows system?

    How can I install photoshop elements on a 64 bit windows system?

    You just use the appropriate install disk/ download. See this:
    Install Premiere Elements, Photoshop Elements
    Or are you asking about some specific procedures?
    Mylenium

  • How do I retrieve a hWnd required to draw an image created by an ActiveX object on a windows 7 64-bit system?

    I'm calling to the NaturalPoint Optitrack SDK using activex controls and am trying to pull tracking data from a trackIR 5.  I have connected to the camera and wanted to start by just viewing a captured frame.  The Optitrack COM provides a function to draw the frame, but needs a hWnd handle for a window to draw to.  I tried to call FindWindow from the user32.dll, but only found FindWindowA, FindWindowExA, FindWindowW, and FindWindowExW.  I'm using Labview 8.6 (32-bit) on a Windows 7 64 bit system (trying to figure out how access the universities liscense manger to install LV2010 64 bit).  Thanks
    Jarad

    The other functions are variants, depending on how you're dealing with strings:
    FindWindowW : Unicode names
    FindWindowA: ANSI names
    FindWindowEx: Searches child windows for the window that has the specified name. You can provide a parent window handle as a starting point. The "A" and "W" follow the same Unicode/ANSI names as FindWindow.
    You'd want to use FindWindowA or FindWindowExA since LabVIEW doesn't support Unicode.

  • Crystal Reports XI R2 SP2 on Windows Server 2008 ( 32 bit system)

    Hi Forum,
    I am trying to run a .NET application on a windows server 2008( 32 bit system) with Crystal Reports X1 R2 SP2 installed.
    The application does not run and throws the following error in the event log.
    Faulting application w3wp.exe, version 7.0.6002.18005, time stamp 0x49e023cf, faulting module unknown, version 0.0.0.0, time stamp 0x00000000, exception code 0xc0000005, fault offset 0x0171ab98, process id 0x%9, application start time 0x%10.
    The same application runs fine on a windows server 2003.Also, the same application runs fine, when i remove the crystal reports code. It loads the .NET pages fine.
    Please suggest me if i am missing something. Please let me know how can i debug this issue?

    Hello,
    Crystal reports XIR2 is not supported on Windows server 2008.
    Check the supporting platforms guide here.
    [Crystal Reports XI Release 2 SP2 - Supported Platform Info|http://www.sdn.sap.com/irj/boc/index?rid=/library/uuid/7081b21c-911e-2b10-678e-fe062159b453]
    Thanks,
    Bhushan.

  • Getting error code 0x400110020000100b while doing system recovery for windows vista 32 bit.

    I attempted to do a system recovery on my Laptop using the included recovery discs and got this error 0x400110020000100B. THe disc looked pretty beat so last week I ordered a new set. Now when I got to put disc 2 in (at 80% complete) I get the same error.  I called customer support and he took me through the F9 process to no avail and I've also tried the F11 approach which got me no where.  I'm frustrated because I really don;t have the money for a new laptop.
    Laptop is a HP Pavilion DV6700. 
    Any help would be appreciated more than you know.
    System is Windows Vista 32 bit
    The guy on the phone said "well ya know thats a pretty old computer"...gee thanks..
    This question was solved.
    View Solution.

    You're very welcome.

  • Windows 7 PRO 64-bit error on performing System Image

    Error message when attempting "A System Image" on a Windows 7 Genuine PRO 64- bit Sony Vaio new Laptop:
    "The request could not be performed because of an I/O device error".
    Trying to backup on a new 3Tb WD My Book Essential External HDD,
    Model: WDBACW0030HBK-NESN
    Tried 2 different USB ports, still the same error.
    The request could not be performed because of an I/O device error (0x8007045D)
    And there is another error code: 0x80078002A
    Below is the event log.
    Log Name: Application
    Source: Microsoft-Windows-Backup
    Date: 12/25/2010 7:16:04 PM
    Event ID: 517
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: Admin-VAIO
    Description:
    The backup operation that started at '?2010?-?12?-?26T03:15:14.102239200Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>517</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-26T03:16:04.069127000Z" />
    <EventRecordID>2142</EventRecordID>
    <Correlation />
    <Execution ProcessID="1796" ThreadID="184" />
    <Channel>Application</Channel>
    <Computer>Admin-VAIO</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="BackupTime">2010-12-26T03:15:14.102239200Z</Data>
    <Data Name="ErrorCode">2155348010</Data>
    <Data Name="ErrorMessage">%%2155348010</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-Windows-Backup
    Date: 12/25/2010 7:10:24 PM
    Event ID: 517
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: Admin-VAIO
    Description:
    The backup operation that started at '?2010?-?12?-?26T03:09:30.572435800Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>517</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-26T03:10:24.142929900Z" />
    <EventRecordID>2135</EventRecordID>
    <Correlation />
    <Execution ProcessID="1796" ThreadID="4016" />
    <Channel>Application</Channel>
    <Computer>Admin-VAIO</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="BackupTime">2010-12-26T03:09:30.572435800Z</Data>
    <Data Name="ErrorCode">2155348010</Data>
    <Data Name="ErrorMessage">%%2155348010</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-Windows-Backup
    Date: 12/25/2010 6:59:46 PM
    Event ID: 517
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: Admin-VAIO
    Description:
    The backup operation that started at '?2010?-?12?-?26T02:58:55.413502900Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>517</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-26T02:59:46.066791900Z" />
    <EventRecordID>2090</EventRecordID>
    <Correlation />
    <Execution ProcessID="5004" ThreadID="3976" />
    <Channel>Application</Channel>
    <Computer>Admin-VAIO</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="BackupTime">2010-12-26T02:58:55.413502900Z</Data>
    <Data Name="ErrorCode">2155348010</Data>
    <Data Name="ErrorMessage">%%2155348010</Data>
    </EventData>
    </Event>
    Log Name: Application
    Source: Microsoft-Windows-Backup
    Date: 12/25/2010 6:56:51 PM
    Event ID: 517
    Task Category: None
    Level: Error
    Keywords:
    User: SYSTEM
    Computer: Admin-VAIO
    Description:
    The backup operation that started at '?2010?-?12?-?26T02:56:05.545604700Z' has failed with following error code '2155348010' (One of the backup files could not be created.). Please review the event details for a solution, and then rerun the backup operation once the issue is resolved.
    Event Xml:
    <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
    <System>
    <Provider Name="Microsoft-Windows-Backup" Guid="{1DB28F2E-8F80-4027-8C5A-A11F7F10F62D}" />
    <EventID>517</EventID>
    <Version>0</Version>
    <Level>2</Level>
    <Task>0</Task>
    <Opcode>0</Opcode>
    <Keywords>0x8000000000000000</Keywords>
    <TimeCreated SystemTime="2010-12-26T02:56:51.581285500Z" />
    <EventRecordID>2089</EventRecordID>
    <Correlation />
    <Execution ProcessID="5004" ThreadID="3744" />
    <Channel>Application</Channel>
    <Computer>Admin-VAIO</Computer>
    <Security UserID="S-1-5-18" />
    </System>
    <EventData>
    <Data Name="BackupTime">2010-12-26T02:56:05.545604700Z</Data>
    <Data Name="ErrorCode">2155348010</Data>
    <Data Name="ErrorMessage">%%2155348010</Data>
    </EventData>
    </Event>
    PS: the System Image went fine for the same laptop on another older 1Tb WD
    My Book Essential External HDD.
    Please help me as i tried the following but still the problem exists:
    1. Stripped the drive to 2Tb
    2. Stripped the drive to 1Tb
    3. Formatted the drive in Windows to NTFS
    Laptop Info:
    Windows 7 Professional
    64-bit
    i5 CPU, 2.53Ghz
    4Gb RAM
    Thanks,
    Grr

    Hi,
    If there is no error after the disk checking, please temporary disable antivirus, update BIOS and device drivers such as hard drive from computer manufacturer’s
    website to check the result.
    If the issue persists, I suggest you boot in Safe Mode, and clear the temp folder. Delete every files that can be deleted.
    C:\Users\%username%\AppData\Local\Temp
    In addition, the following threads would be helpful as well.
    http://social.technet.microsoft.com/Forums/en-US/itprovistaapps/thread/7b64e871-71be-4c5d-a4a3-502744da978b
    http://social.technet.microsoft.com/Forums/en/itprovistaapps/thread/9e5b22f1-8fb3-4d70-8f79-b92c7dc6e840
    Thanks,
    Simida
    Please remember to click "Mark as Answer" on the post that helps you, and to click "Unmark as Answer" if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

  • ITunes will not shutdown I have to Contrl-Alt-Delete and end itunes.exe and itunes help to get it to shut down and stay closed. I did a system restore and went back to 10.5.1 version and updated to 10.5.3 no dice Windows 7 64 bit

    Itunes will not stay close ever since I updated to 10.5.3 version. I try to close program and it pops right back up! The only way to close is open tack manager and stop the itunes.exe and the itunes.help then it will stay close. I did a system restore back to the earlier version of itunes but problem presisted. I finally did the task manager again and downloaded the update to 10.5.3 and this seemed to resolve the problem for awhile but now it is back! Is anybody else experiencing this problem? and where you able to correct it? I'm running Windows 7 64 bit have never had a problem with anything till now. I ran scans of my machine no viruses.

    Hi,
    i have exactely the same problem.
    After the update to v10.5.3 iTunes isn't shutting down anymore. I have this error on various Windows versions (XP SP3, Win7 x86, Win7 x64.
    On my private Notebook v10.5.2.11 still works! I won't update iTunes there - not even for a test .
    /Tom

Maybe you are looking for

  • How can I make the text crisper and less blurry on my MacBook Pro?

    I just purchased my first MacBook Pro, and I absolutely love it, save for one potential deal breaker: The text displays blurry. Instead of stark, black on white text, there is a slight halo of grey (or whatever color the font is in) around every char

  • Webcenter Spaces Events Service configuration: FATAL Alert BAD CERTIFICATE

    Hello, I have a simple requirement to connect the events taskflow from an exchange server that is https and has a confirmed security certificate. I use the wsdl path for the events service and add it to my webcenter spaces service configuration -> Pe

  • Problem with OData Collection in Template Customization Web IDE

    Hi Experts, I created my simple service in SEGW and I try use it in the application created in SAP Web IDE. I'm creating new project from menu File, New, Project from Template. I'm choosing SAP Fiori Master Detail Application giving a name of project

  • Language key in info-package selection

    Hi, Just wondering on the language key selection in the info-package. This topic was raised a number of times in the forum and what i have found is no matter what you do 'Language Key' will not appear in the info-package selction as its a srevice API

  • How get File Type Icon Image

    how get File Type Icon Image (Windows ) FileSystemView.getSystemIcon( File );works in swing application, can not be used for javafx.scene.image.ImageView;