Workflow not triggered when i have changed the PO

Hi,
We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items.
we have custom workflow evernt (changed) to update the items if user change in header. But the issue is if user changes the items and save the po, it is not updating immediatly. after we come back to Purcahse Order and save the purcahse order again then it updates the table.
Is there any reason why the event is not triggered when the PO was changed initially.

Hello,
"We have custom fields (Price) in PO Header as well as in item. when we update in header the price should get distributed to items. "
If you update a price in the header, how/why would that be distributed to the items? Is this a total price of the whole PO? Why not just have it in the header?
"we have custom workflow evernt (changed) to update the items if user change in header."
OK. Strange, but OK.
"But the issue is if user changes the items and save the po, it is not updating immediatly"
I thought it was supposed to happen when the users changed the header, not the items.
If you really have a workflow to update the items when the header is changed, then maybe it's not succeeding if the PO items are locked, eg by having them on your screen. Did the worklow actually start? Any error messages?
rgards
Rick Bakker
hanabi technology

Similar Messages

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

Graphic card problem maybe? Since when I have changed the hard drive to my macbook pro and I installed all the new softwares, my mac is very slow and the screen gives crazy pictures,could maybe be the graphic card, does anybody have experienced this?

after a restart it works for a time, but always slow. I went to the Applestore this afternoon and the made a check and said it would be the logicboard and they would have to change it for CHF 600 and it would be ready in 10 - 15 days

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands, but the problem comes back. Transmitter problem or interference?

My 4-year old AirPort Extreme intermittently drops out (no signal to my iMac Book). My hard-wired iMac still has internet capability. The laptop shows reception of other nearby Wi-Fi transmitters, but not mine. I have changed the bands back and forth, but the problem comes back. How can I check if it is a transmitter problem or interference?

Let me see if I can suggest a strategy.
I have talked with my ISP and he said that I am not the only one with an Airport Extreme with the same issue. He said to try to write the DNS direclty, rather than using the Auto settings - still nothing works.
What modem do you have and what sort of broadband?
What mode is the AE in.. router or bridge?
I have an Airport Express from 2010. Since about a month and definetly since yesterday, I cannot connect any device via Wifi to it although LAN connection works correctly.
Is this express or extreme.. the rest of the post you refer to extreme.
What is the actual model number of the AE? A1xxx from the base or the part number MCxxx from the box.
If the AE is bridge.. I want you to try a different method.. put it in router mode.. don't worry about double NAT but ensure the IP range of the modem /router is different to the AE.. so if one is 192.168.x.x then the AE on default at 10.x.x.x is fine.. if the main router is 10.x then move the AE to 192.168.x.x
Make sure the guest wireless is off.
Using a 5.6 utility on your 10.6.8 OS mini go to the log and see if the wireless is registering..
You should see lists of wireless connection like..
Post as many screenshots of the setup as you can.. it helps loads.
IPv6 is starting to become a pain.. try it off and try local link and try auto.. in the computer.

HT1551 My Apple TV is not working . I have changed the hdmi cable and no joy . It has power as the light is on . I have reset it too . There is just a blank screen . The apple sign comes on the TV then nothing . On my I phone there is the Apple TV symbol

My Apple TV is not working all of a sudden .
There is power to it , the light is on . I have turned it off and back on but no joy .
I have changed the hdmi cable .
I have reset it using the aluminium remote .
When I go to play a song using my I phone the Apple TV box is there on my phone but music comes out intermintant .
My tv screen is just blank but when I reset it the apple logo comes on my tv but then nothing else

connect it to usb (on a computer)and restore the firmware

Workflow not triggering when changing Item-level Permissions in Sharepoint 2013 list

Scenario:
We have a custom list in Sharepoint 2013 that we use for Case Management. We have a workflow that triggers on a created item generated from an email. The user then gets a reply with a link to his own case.
I want the users only to be able to see their own cases and no one elses. When I change this under
Advanced Settings under List Settings and
Item-level Permissions and set them to Read items that were created by the user
and Create items and edit items that were created by the user
the workflow doesn´t trigger.
How can I resolve this? I've tried every possible out-of-the-box permissions but with no result. Help!
Thanks in advance!
// Browncreek

When you're testing , remember you cant trigger declarative workflow from the System Account - you need a general user account for auto-trigger workflows. Good luck!
Chris McNulty MCSE/MCTS/MSA/MVTSP | blog http://www.chrismcnulty.net/blog | twitter @cmcnulty2000 Microsoft Community Contributor Award 2011
Hi, I have the same problem. Except that I am not using an email to create a new item. The item is created by members of a SharePoint group that have Contribute access to the list. When use the same settings i.e.
Read items that were created by the user and Create items and edit items that were created by the user,
the workflow does not trigger. If I set it back to Real all items and Create
and Edit all items, it triggers the workflow.
Please help me resolve as I have rolled this out to pilot users and am having this trouble.
Thanks,
Vishal

Workflows not triggered when documents are created in Doc Set via Content Organizer

The following is my scenario:
A document set (containing several documents) is created in Library A on Site A
Using Send To, the Document Set is sent to the Drop Off Library on Site B (a different Site Collection)
A Content Organizer rule then moves the Document Set and its documents to destination Library B
In Library B I have defined a workflow (using Visual Studio 2012) that is triggered when new item is create
When the Document Set arrives in Library B from the Drop Off library (i.e. when the Content Organizer moves the Doc Set to Library B), the workflow is triggered (and executes) on the Document Set, but it is NOT triggered on the documents within the Document
Set. How can I get the workflow to trigger on the documents within the set when they are created via the Content Organizer rule?
The interesting thing is that if I manually add another document to the Document Set in Library B, the workflow is triggered on that document. It just does not trigger when the documents are created via the Content Organizer.

Hi,
In edit Content Organizer rule page, I see there is an option as Automatically create a folder for each unique value of a property:
However, unlike the drop down used in the property based filters above, this drop down *only* contains properties that are required by your content type.
This is done to prevent adding folders that have no values for a property.
If you need to put similar documents to the same folder, you could consider making use of this feature.
Regards,
Rebecca Tu
TechNet Community Support

Macbook pro will not turn to almost have changed the motherboard and the power supply board

Hello,
A customer brought me to repair his macbook pro A1151, the computer flashed, I had to change the power board and the motherboard and the computer still does not turn.
The customer used a power supply with wire was déterrioré there were overheating the power supply board has traces of burns and a component of the motherboard is broken.
What may be another problem that prevents your computer from turning on?
Thank you.

Run an Apple Hardware Test:
http://support.apple.com/kb/ht1509
It may pick up some information that might give you a clue as to the unusual behavior.
Note: An error free AHT is not always definitive.
I still would go to an Apple store genius bar and have the MBP examined. It will be done for FREE regardless of warranty status.
Ciao.

Hi when I use my apple password to update changes to my email account, it is not recognised. I have changed the password twice. Is the pass code something different and if it is, how do I get a new one?

HT1222

the passcode is made by the user when turning on the passcode feature on, on the phone
the apple id password that is used for itunes, the app store and icloud email is different and can be reset at iforgot.apple.com

Workflow not triggered when called within a Dynamic Trigger of HRMS

Hello,
Requeirment :Whenever any data is updated withing the People workbench of HRMS, a notification should be sent with the following message:
Employee Number <Empno> has modified emailid from <old> to <new>.
To achieve the same a dynamic trigger has been written on per_all_people_f table
invoking a procedure with the below script:
if(nvl(P_old_MS_Value,' ')<>nvl(P_New_MS_Value,' ')) then
     insert into log_self values(P_old_MS_Value,P_new_MS_Value,l_itemkey,p_employeename);
     wf_engine.CreateProcess ( itemtype => 'HRSSA',
itemkey => l_itemkey,
process => 'IRHR_SELFSERVICE_CHANGE_PRC');
insert into log_not values('After Create Process');
     wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'CURRENT_PERSON_DISPLAY_NAME',
avalue => p_employeename);
insert into log_not values('After CURRENT_PERSON_DISPLAY_NAME');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'IRHR_OLD_VALUE',
avalue => P_Old_MS_Value);
insert into log_not values('After IRHR_OLD_VALUE');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'IRHR_NEW_VALUE',
avalue => P_New_MS_Value);
insert into log_not values('After IRHR_NEW_VALUE');
wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'IRHR_ATTRIBUTE_THAT_CHANGED',
avalue => 'Marital Status');
insert into log_not values('After IRHR_ATTRIBUTE_THAT_CHANGED');
     wf_engine.SetItemAttrNumber ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'FORWARD_TO_PERSON_ID',
     avalue => 572366);
     insert into log_not values('After FORWARD_TO_PERSON_ID');
     -- set the current forward to person username attribute
     wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'FORWARD_TO_USERNAME',
     avalue => 'CHRISTOPHERHARRIS');
     insert into log_not values('After FORWARD_TO_USERNAME');
     -- set the current forward to display name attribute
     wf_engine.SetItemAttrText ( itemtype => 'HRSSA',
     itemkey => l_itemkey,
     aname => 'FORWARD_TO_DISPLAY_NAME',
avalue => 'Harris, Christopher');
insert into log_not values('After FORWARD_TO_DISPLAY_NAME');
     --insert into log_self values('Before Start Process');
--commit;
     wf_engine.startprocess(itemtype=> 'HRSSA', itemkey => l_itemkey);
     insert into log_not values('After startprocess');
However we find the workflow process not getting triggered. The same however happens when the script is executed sepreately and a commit is given after the Start process. Is there a way i can invoke in dynamic trigger as the dynamic trigger prohibits use of Commit.?
Pls help ASAP.
Thanks & Regards,
Gayatri Jayaraman

Hi,
The Object key which you passing to trigger is not correct. Give the full key preceded with Zero.
Regards,
Surjith

ESS/MSS Standard workflow not triggered....

Hi Experts,
I have small doubt, but why can't I solve this I does't know? Kindly some one help me on this issue.
Scenario as follows...
I have copied the standard loan workflow "WS18900041" to my custom workflow. So, Here when I apply loan through portal workflow is not triggered. I have activated the events which are present in loan. But after that also I am unable to trigger the workflow. Through SWE2 / SWETYPV tcode I have enabled the linkage to the portal. When I activate the event in workflow it will be automatically shown in SWE2 / SWETYPV. After all the process I have activated and checked, When I tried to apply for loan and submit the loan I am unable to trigger the workflow else workflow is not getting triggered. Kindly help.... Most Highly importance.... Please reply as soon as possible....
Thanks & Regards
Kannan

Hi Kanan
I am in the same object now. Can u share me some scenarios how to do this.
Regards
Gopal

Workflow not triggered..in client server

Hi Friends..
i have developed one workflow for po release in local system it works fine..
But i developed the same workflow in client system it was not triggered..
i checked in swue the event was triggered perfectly..
But the workflow not triggered.. if i click the workflow overview in me23n it shows
"there are no workflows that are already worked with this object" so i dont know why this problem..' occur.. this problem arises at the time time of development in local system.. but now it was cleared..at that time release strategy not maintained.. but now release strategy also maintained.. but i dont know the exact reason and how can i solve this kind of issue...
so anyone help me..urgent issue..
Thanks in advance
Gowrishankar

What is the message that you are getting for the event? Is it "No receiver entered" or something else?
Check for the event linkage between your event and workflow in SWE2. If it is not set select the checkbox "Linkage Activated" and acitivate the linkage and then try to trigger the event.
If your event linkage gets deactivated everytime you try to trigger the event, there could be some problem in binding from your event to workflow container. Check if all mandatory parameters in workflow receive data from event container.
Thanks,
Prasath N

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

I have changed the email signature on my iPhone, when composing a new email the signature is there, however when I am replying to an email it is not, how can I make sure that the signature is at the end of every email I send?

Yes I know what you mean about it cluttering the thread and for personal emails it is better without the signature. However this relates to sending business emails from an iPhone so I need the signature present on every email.
I can't find anything in Settings so I was hoping someone may have some knowledge/information/experience regarding this problem.

HT1399 When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

When I import a CD to itunes, it splits the album in to multiple entries. I have changed the info on some but others just will not merge. Is there an easy way to do this and can I stop them from splitting in future? Thanks

Okay this is what fixed my problem. Some kind of error/glitch occured half-way through importing that third cd that prevented further imports from any other cd. Once I completely removed the half-imported cd album from my library I could further import cd's without any problems.

Have changed the "Index" of my website in Dreamweaver and followed the "Put" instructions to upload it back to the "Remote Server," but when I go onto the web to check it, the main (Index) page has not changed. Help!

Have changed the "Index" of my website in Dreamweaver and followed the "Put" instructions to upload it back to the "Remote Server," but when I go onto the web to check it, the main (Index) page has not changed. Help!

This is a duplicate post; see How do I upload from Dreamweaver CS6?

Hello, My old email address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the pa

Hello,
My old emails address which I have used as my apple id for 10 years is being made redundant. I have changed the email address to a new gmail one and this is my new apple id. But my iMac has not recognised this. It keeps saying it wants the password for my old email address. I have seen some advice on these forums which suggest signing out of iCloud and then back in again. But when I start doing this it asks me if i want all the photos deleted that have not been downloaded onto the mac.
I have had an iCloud account for quite sometime and I'm afraid of losing everything in my cloud if i sign out and sign in with a new id.
Is this fear realistic?
I know I can change back to my old email, sign out and then sign in wight he new one...
Please help!

This did not work for me. My old email account for iCloud still pops up on my screen every time I open my macbook. I've deleted it, reset it, every thing I can think of and it still shows up. I think six months of this is more than enough time to wait.
RDG

Workflow not triggered when i have changed the PO

Similar Messages

Maybe you are looking for