Ws manager service fails with non-soap-response
I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
with a non-soap-response error :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
This is returned by the original web service :
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Body>
<n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
</n1:SendMessageResponse>
</env:Body>
</env:Envelope>
What is going wrong here ?
I try to set up a service in wsm. Gateway, policy and service are defined via the defaults.
I can access my original service via BPEL and via the WSM test page, but calling the wsm service fails
with a non-soap-response error :
<SOAP-ENV:Envelope xmlns:SOAP-ENV="http://schemas.xmlsoap.org/soap/envelope/"><SOAP-ENV:Body><SOAP-ENV:Fault><faultcode xmlns:p="http://schemas.oblix.com/ws/2003/08/Faults">p:Client.GenericFault</faultcode><faultstring>Service gibt Nicht-SOAP-Response zurück</faultstring><detail/></SOAP-ENV:Fault></SOAP-ENV:Body></SOAP-ENV:Envelope>
This is returned by the original web service :
<?xml version="1.0" encoding="UTF-8" ?>
<env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Body>
<n1:SendMessageResponse xmlns:n1="urn:ActionWebService"
env:encodingStyle="http://schemas.xmlsoap.org/soap/encoding/">
</n1:SendMessageResponse>
</env:Body>
</env:Envelope>
What is going wrong here ?
Similar Messages
-
Windows 8 Hyper-V - Virtual Machine Management Service failed to start the virtual machine
I have Hyper-v running on Dell Precision T3600 with Windows 8 OS. I am trying to start a VM (called Windows8VM) to install Windows 8 in the hyper-v virtual machine, but I keep getting the following message:
"Windows8VM" failed to start.
Failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
"Windows8VM" failed to start. (Virtual machine ID D670D3BB-9AE2-0453D-9191-EA6EFC242A9C)
The Virtual Machine Management Services failed to start the virtual machine "Windows8VM" because one of the Hyper-V components is not running.
I have turned the hyper-v feature on in the "Turn Windows feature on or off. The BIOS has virtualization enable. Help!!! driving me nuts for a week now.
Nick :(Okay, I turned off hyper-v, went to bios and enabled Intel TXT(LT-SX) Configuration. Made sure that both Virtualization and VT for Direct I/0 are on. Next, I turned on Hyper-V and I create a brand new Virtual Machine call Windows8 and had
the DVD point to Windows8 ISO file on hard drive. When I clicked on start, it stayed in the Starting status mode for about 5 minutes. Then of course it failed. I looked at the Hyper-V-VMMS log and here is what it output:
Log Name: Microsoft-Windows-Hyper-V-VMMS/Admin
1) Error: The virtualization infrastructure driver (VID) is not running.
2) Info: Found a certificate for server authentication. Remote access to virtual machines is now possible.
3) Info: Successfully started the Virtual Machine migration connection manager.
4) Info: Virtual Machine Management service is started successfully.
5) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
6) Info: The WMI provider 'VmmsWmiEventProvider' has started.
7) Info: The WMI provider 'VmmsWmiInstanceAndMethodProvider' has started.
8) Info: The WMI provider 'VmmsWmiEventProvider' has started.
9) Info: The Integration Services Setup Disk image was successfully updated.
10) Error: The virtual machine bus is not running.
11) Error: 'Virtual Machine Bus' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
12) Error: 'Storage Virtualization Service Provider' driver required by the Virtual Machine Management service is not installed or is disabled. Check your settings or try reinstalling the Hyper-V role.
13) Error: The Virtual Machine Management Service failed to start the virtual machine 'Window8' because one of the Hyper-V components is not running (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB).
14) Error: 'Window8' failed to start. (Virtual machine ID 2B393AF4-7B7E-4243-805B-23C09D20F4FB)
Nick -
Got this error after a reboot for the monthly MS hotfixes. After messing around too much, I finally found the problem and though that I would document it here since I have not found the solution anywhere I looked.
This is in a Remote Desktop setup of two RDCB using a SQL DB that is hosted on a third server. The Remote Desktop Management service would fail to start with the "The Remote Desktop Management service terminated with the following service-specific
error: %%4294967295" error because the SQL Server service hosting the database was offline. It had not automatically restarted after the same hotfixes. So I started the SQL server, then was able to get Remote Desktop Management to start on my RDCB without
any delay.
Philippe CarignanHi Philippe,
How is everything going on?
Please check below thread for information.
Remote Desktop Management Service, Service-specific
error %%2284126209
Hope it helps!
Thanks,
Dharmesh -
SBS2011: Starting Exchange Management shell failed with the following Error 7BF3678A-829B-4F11-884C-4D 49060D84E6
This is not a REMOTE Exchange 2010 server, I'm launching it from the SBS2011 Console with the Domain Admin.
It looks like a permissions error, because when I use "RUN AS ADMINISTRATOR" on the exchange management tool, it launches with no errors and no issues...
I searched and I couldn't find anything that fits this exact error.
Thanks
RussHi,
Any update?
Just checking in to see if the suggestions were helpful. Please let us know if you would like further assistance.
Best Regards,
Andy Qi
TechNet
Subscriber Support
If you are TechNet
Subscription user and have any feedback on our support quality, please send your feedbackhere.
Andy Qi
TechNet Community Support -
How to deal with complex SOAP responses when calling web services ???
Hi all,
I have an issue when calling a web service that returns a complex
SOAP response message. With simple responses (e. g. array of strings) it
worked.
I created the PDF as an Interactive form with Livecycle Designer 8.2.
The Javascript looks like this:
var cURL = "http://blabla";
var cTestString = "too";
SOAP.wireDump=true;
var response = SOAP.request(
cURL: cURL,
oRequest: {
"http://blabla.com/:complete" : {
arg0: cTestString
cAction: "http://bla.com:50000/"
var resp = response["http://blabla.com:serviceResponse"];
console.println("lenght:"+resp.length);
var myns = "http://blabla.com/namespace";
for (var nItem in resp.return)
console.println("" + nItem + " " + resp.return[nItem] );
for (var ConceptView in resp.return[nItem])
console.println(" "+resp.return[nItem].length);
console.println(" "+ConceptView+" "+resp.return[nItem][ConceptView] );
if (ConceptView == myns + ":Response")
for (var item2 in resp.return[nItem][ConceptView]){
console.println(" "+item2+" "+resp.return[nItem][ConceptView][item2] );
I call the service and when I realized that I do not find out the type of the object returned, I used the nested for-in-loops to iterate through it. But it seems that there is just one item in the Javascript object returned, although the SOAP message clearly shows that there are more than one item.
Can you help me?
One key problem when analyzing this issue is that I do not know at all
the Javascript type of response. We suspected it might be an array, but it is not
because the method .length returns "undefined". It would already be
helpful to know at least the type of this object and to know callable
methods and so on ...
Best regards
Christoph
P.S. As mentioned I used Livecycle Designer 8.2 and displayed and
debugged the document using Acrobat 9.Christoph,
Firstly LiveCycle Designer 8.2 is still not supported to develop forms as per my knowledge. The latest version compatible for SAP Interactive Forms is ALD 8.0.
There is a difference between Acrobat based forms and LiveCycle forms and based on your coding it looks to me that you are trying to create a LiveCycle based form with coding of Acrobat which is not supported in LiveCycle Desginer, which is why you may be getting the error.
I hope that does not confuse you, so may check this [link|http://www.acrobatusers.com/articles/2006/08/designer_or_forms/index.php] for some clear information on what point I was trying to make.
Chintan -
SOAP client fails to validate SOAP Response
Hi,
I have developed and deployed a document style web service (with use="literal")
on Web Logic 7.0 server using servicegen ant task. I am using a non Web Logic
client to invoke this service.
The WSDL generated by the service, uses "elementFormDefault="qualified" but in
the SOAP response, all elements are not qualified by namespace. The client is
failing to validate this SOAP response against the types defined in WSDL file
because of this.
I would like to know how to generate a SOAP response with all elements qualified
with namaspace.
Thanks
Prasghhttp://newsgroups.bea.com/cgi-bin/dnewsweb?cmd=article&group=weblogic.developer.interest.webservices&item=2831&utag=
prasgh wrote:
>
Hi Bruce,
Thanks for your reply. It works fine with 8.1 but it doesn't with WLS 7.0. What
we have is 7.0. How can I resolve this on 7.0
Appreciate your help.
Thanks
Prasgh
Bruce Stephens <[email protected]> wrote:
Hello,
Are you using the latest WLS 7.0SP2?
We recently updated the interop instance: http://webservice.bea.com:7001
with WLS 8.1 so I don't have v7 stack (online) to show you, however I
did try it locally using the Compound1 test (doc/lit with
"elementFormDefault="qualified") and it works as shown below.
HTHs,
Bruce
<!--REQUEST.................-->
<env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Header>
</env:Header>
<env:Body>
<ns100:x_Person xmlns:ns100="http://soapinterop.org/xsd"
Male="true"
Name="sample string">
<ns101:Age
xmlns:ns101="http://soapinterop.org/xsd">20.2</ns101:Age>
<ns102:ID
xmlns:ns102="http://soapinterop.org/xsd">10.1</ns102:ID>
</ns100:x_Person>
</env:Body>
</env:Envelope>
Response from the server
<!--RESPONSE.................-->
<env:Envelope xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<env:Body>
<ns100:result_Person xmlns:ns100="http://soapinterop.org/xsd"
Name="sample string"
Male="true">
<ns101:Age
xmlns:ns101="http://soapinterop.org/xsd">20.2</ns101:Age>
<ns102:ID
xmlns:ns102="http://soapinterop.org/xsd">10.1</ns102:ID>
</ns100:result_Person>
</env:Body>
</env:Envelope>
[email protected] wrote:
Hi,
I have developed and deployed a document style web service (with use="literal")
on Web Logic 7.0 server using servicegen ant task. I am using a nonWeb Logic
client to invoke this service.
The WSDL generated by the service, uses "elementFormDefault="qualified"but in
the SOAP response, all elements are not qualified by namespace. Theclient is
failing to validate this SOAP response against the types defined inWSDL file
because of this.
I would like to know how to generate a SOAP response with all elementsqualified
with namaspace.
Thanks
Prasgh -
Request management service issue with SSL Sites
Hi guys,
I've configured up the request management service, but after start the service on our wfe servers (even before to configure specific web applications), our ssl sites begin to fail and the event viewer start to alert several errors, by the other hand,
sites over 80 port with no SSL works as expected.
I've found some similiar scenarios without a happy ending. Below you can find some of the main errors in event viewer and ULS Logs. In
this post solved a very similar issue using ssl host headers with a unique ip but we are using fqdn certificates so it is not an option for us.
I've already checked the
good posts from Spencer Harbar and He says that is good idea to use host named site collection, but this is not an option for me because we need to use Self Service Creation and mixed authetnication, besides, None of the Technet literature that i've reviewed
says something about don't support path based site collection.
So far, the only way to avoid this errors is not using the service(discouraging finding), These are some errors we got on Event viewer and logs:
Machine 'MACHINENAME (AppPool(_LM_W3SVC_515444293_ROOT))' failed ping validation and has been unavailable since '3/28/2014 3:55:48 PM'. (Just starting the service Event viewer begis to have a bunch of this errors)
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q3
High Reached maximum number of failed machines based on ping results for this routing group
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.96 w3wp.exe (0x1184)
0x154C SharePoint Foundation
Request Management ai2q4
Medium Unavailable machines based on ping results: MACHINENAME
53c2819c-8216-20f3-68c0-c0a3e55c92d5
03/28/2014 13:34:01.97 w3wp.exe (0x1184)
0x1C2C SharePoint Foundation
Request Management adc7u
Medium Mapping URI from 'https://HOSTNAME:443/Style Library/somos-sura-css/inicio/inicio.css' to 'https://MACHINENAME/Style%20Library/somos-sura-css/inicio/inicio.css'
53c2819c-8217-20f3-68c0-cb2f392c388b
Seems like it tries to find a site with the machine name, not the host name registered in the Alter access mappings (like portal.acme.com) .
I would appreciate some feedback about this. Another posts with similar issues:
http://amolmeshe.blogspot.com/2013/05/sharepoint-2013-request-management.html
http://www.akspug.org/Blog/Post/4/Request-Management-and-Error-8316
Regards,Hi,
According to your post, my understanding is that you had an issue about the Request management service with SSL sites.
It’s a known issue that the request management service could not work with the SSL site.
We had already reported the issue to the product team, as a workaround, if you want to use the request management service, you can change the https site back to http.
What’s more, the SharePoint 2013 SP1 has been relased, you can install it to check whether it works.
http://support.microsoft.com/kb/2817429/en-us
Thanks & Regards,
Jason
Jason Guo
TechNet Community Support -
Update Management Service fails to update dev workplace for CE 7.1 EHP1
Hi All
When I try to update my developer workplace server for SAP Netweaver CE 7.1 EHP1 with the update management service, it fails with this error:
The check for updates has failed Error message: The check for updates on SAP market place failed. Unable to compute the UpdateItems from the given components. com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist) com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist) java.rmi.ServerException: Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist Unable to compute the UpdateItems from the given components. com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist) com.sap.engine.services.webservices.espbase.client.bindings.exceptions.TransportBindingException: Connection IO Exception. Check nested exception for details. (Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist) java.rmi.ServerException: Server Exception: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist; nested exception is: javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist javax.xml.rpc.soap.SOAPFaultException: BOSF_SWDC_SOLMAN_SYS_USER2URL:system_does_not_exist SOLUTION: Check the file CheckForUpdates.log for more information on how to solve the problem.
There is also no such log file: CheckForUpdates.log anywhere on the machine.
Anybody know what's wrong?
Regards
JohanHi Praveen,
Not sure exactly which file is the starting instance log. Here is the output of the sapstartsrv.log file, which is the last one created
before the error occurs.
trc file: "sapstartsrv.log", trc level: 0, release: "711"
pid 3344
[Thr 3484] Tue May 17 08:13:19 2011
SAP HA Trace: SAP Microsoft Cluster library '711, patch 20, changelist 1027625' initialized
CCMS agent initialization: return code 0.
Initializing SAPControl Webservice
SapSSLInit failed => https support disabled
Starting WebService Named Pipe thread
Starting WebService thread
Webservice named pipe thread started, listening on port
.\pipe\sapcontrol_00
Webservice thread started, listening on port 50013
I have looked for the notes regarding memory and swap issues. But the strange thing is that I get Netweaver to work at first but get errors when upgrading.
Br,
Johan -
Is Mobile 2007 Stock Management Service Compatibile with R/3 4.7
Can any one tell me if I can implement Mobile Service - Service Parts management - Van stock with R/3 47 back-end
Installation guide says ERP 6.0 as a landscape requirements..
I have few questions
Can Ii implement CRM Mobile 2007 Service Module including the Vanstock with a R/3 47 Back-end
If I can what is the plug-in I use to integrate the Mobile database to CDB and to R/3
Any help will be rewarded.
Thanks
RajHi Raj,
For using Vanstock scenrios on the mobile service application, SAP ECC 6.0 and SAP Netweaver Mobile 7.1 are the minimum requirements.
It cannot be implemented for any release lower than these because these functionalities/APIs are available from the mentioned releases.
Best Regards,
Pravin.. -
CC app manager update failed with error code 50 after reaching about 35%
Trying to update the CC app manager. The update is always very slow (I have ATT DSL, lowest level) and I usually terminate it after an hour or so. Today I let it run and it failed with error code 50 after reaching about 35%. Any ideas?
Update to my original post. I read through some of the suggestions that I found in other threads for fixing this problem, and it appears that this has been an ongoing issue. Numerous fixes have been suggested, some very convoluted, difficult, and involved, including those that came from the customer support folks. I passed on those as this should be something simple. How Adobe manages to let updating of their own software turn into an ongoing problem is beyond me and sort of defeats the purpose of subscribing. I then noticed that a simple fix had been suggested a few times, so I tried that.
The user suggested fix that worked for me was:
1) Restarted computer (Asus Windows 7 i3 machine for me) in Safe Mode with Networking. Logged into my separate Admin account just in case.
2) Started the creative cloud desktop app.
3) The app said it needed to be updated. I hit the update button.
4) Update started and proceeded slowly as it had in many previous failed attempts (I have ATT DSL at the slowest level, but it is not dial-up). Within about 30 min, the update succeeded.
5) Restarted computer in normal mode.
6) The creative cloud desktop app now did not say it needs to be updated, and I can update my other apps normally. Have not updated LR or PS yet, but plan to try. If that fails, I may try doing it in the Safe Mode with Networking.
So, that was relatively painless and much much simpler than many of the other suggestions I saw. Do not know if it will work for everyone, but I wanted to post the fix that worked for me. Thank you very much to the 2 or 3 users who had suggested this fix earlier (sorry, I did not write down your IDs, but the threads can be found by searching for creative cloud desktop update fail error code 50). Hope this saves some people a lot of time. -
Adding Silverlight-enabled WCF Service failed with error code 50
Hello everyone,
I am very new to Silverlight ,and I am working on silverlight with WCF.
When I tried to add a silverlight-enabled WCF service. I kept getting the error
Method failed with unexpected error code 50.
I am working with Silverlight 5 and VS 2013 ,I have no idea about it. I appreciate that if anyone can help?
Thank youHi,
Please make sure your wcf is valid.
Here are some resources which could help you:
https://msdn.microsoft.com/library/cc838234(VS.95).aspx
http://www.codeproject.com/Articles/262164/Using-WCF-Service-with-Silverlight#_articleTop
Best Regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Reports Service failes with 186 error after Disco4i Admin install.
OS NT 2000
DB 8.1.7
9iAS 1.0.2.1
Disco Admin 4.1.33e
Everthing was working fine until the install of Disco4i Admin. It would error on the install until I stopped the Reports Service. Post install - The reports service failed to start. NT specific error 186.
I've performed a TNSPING80.EXE myserver & verified the TNSNames.ora configuration in 806, iSuites, and 8.1.7. Everything looks ok.If you have set the TNS_ADMIN environment variable or registry key to an alternate value, Oracle9iAS Reports Services may fail to start with an error 186 or REP-0186. In such a case, you can start Oracle9iAS Reports Services from an MS-DOS command prompt as follows:
prompt> setenv TNS_ADMIN <IAS_HOME>/6iserver/network/admin
prompt> <IAS_HOME>/6iserver/reports60_server start
replacing <IAS_HOME> with the directory where you installed Oracle9i Application Server. This will force Oracle9iAS Reports Services to use the tnsnames.ora file at <IAS_HOME>/6iserver/network/admin.
Hope this will help
null -
EPM 11.1.2 - epmsystem Configuration Manager service fails to start
OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager fails to start. I do not know how I am getting affected because everything else works fine. I have Essbase , Studio, Planning, EAS installed and all of them work fine. Do not know why this service fails. This is a fresh install of EPM 11.1.2 on windows 2003.
The Event Viewer says "The OracleEpmSystemc_oracle_middleware_user_projects_epmsystem1ConfigurationManager service failed to start due to the following error:
The service did not respond to the start or control request in a timely fashion. "
Thanks
Edited by: 823489 on Dec 24, 2010 6:25 AMHi,
have you found a fix for this ?
I'm getting the same error.
Thanks,
Cyril -
Export failing with non zero return code on windows
exp returning non zero return code on windows .
we have some scrips that depends on return code of exp .
There are two tables one is present (test1) and other is not present (test2)
and we are exporting
screen shot --
WITH EXP :-
on windows --
C:\>exp tables= test1,test2
Export: Release 10.2.0.2.0 - Production on Fri Jun 11 13:55:16 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: dev
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in WE8MSWIN1252 character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table TEST1 6291456 rows exported
EXP-00011: DEV.TEST2 does not exist
Export terminated successfully with warnings.
C:\>echo %ERRORLEVEL%
3
Edited by: user2015671 on Jun 11, 2010 4:32 AMno the issue is there.we have problem with non zero return code by exp on windows not on unix .
I had done same on unix it returning zero return code.
Screen shot:-
> exp tables=temp,temp3
Export: Release 10.2.0.1.0 - Production on Fri Jun 11 16:52:48 2010
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Username: dev
Password:
Connected to: Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
Export done in US7ASCII character set and AL16UTF16 NCHAR character set
About to export specified tables via Conventional Path ...
. . exporting table TEMP 3 rows exported
EXP-00011: DEV.TEMP3 does not exist
Export terminated successfully with warnings.
echo $?0
Edited by: user2015671 on Jun 11, 2010 4:59 AM -
SOAP-Request to external Web Service Failed with GENERAL_ERROR PART UKNOWN
Hi,
i have generated a Consumer Proxy with the following WSDL File:
<?xml version="1.0" encoding="UTF-8"?>
<!-- Mit XMLSpy v2010 rel. 2 (http://www.altova.com) von Ralph Rothe (n/a) bearbeitet -->
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tns="http://new.webservice.namespace" targetNamespace="http://new.webservice.namespace">
<wsdl:types>
<xs:schema targetNamespace="http://new.webservice.namespace" elementFormDefault="qualified"/>
</wsdl:types>
<wsdl:message name="greetAnfrage">
<wsdl:part name="user" type="xs:string"/>
</wsdl:message>
<wsdl:message name="greetAntwort">
<wsdl:part name="return" type="xs:string"/>
</wsdl:message>
<wsdl:portType name="TestServerPortType">
<wsdl:operation name="getResults">
<wsdl:input message="tns:greetAnfrage"/>
<wsdl:output message="tns:greetAntwort"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServerBinding" type="tns:TestServerPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getResults">
<soap:operation soapAction="urn:#NewOperation" style="rpc"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServerService">
<wsdl:port name="TestServerPort" binding="tns:TestServerBinding">
<soap:address location="http://92.79.135.41/soap/server.php"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
If i testing the Error "GENERAL ERROR - PART UNKNOWN (NULL) occur. A payload trace with SRT_UTIL i show a correct response.Hi,
i have generated a Consumer Proxy with the following WSDL File:
<?xml version="1.0" encoding="UTF-8"?>
<!-- Mit XMLSpy v2010 rel. 2 (http://www.altova.com) von Ralph Rothe (n/a) bearbeitet -->
<wsdl:definitions xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:http="http://schemas.xmlsoap.org/wsdl/http/" xmlns:xs="http://www.w3.org/2001/XMLSchema" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:mime="http://schemas.xmlsoap.org/wsdl/mime/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:tns="http://new.webservice.namespace" targetNamespace="http://new.webservice.namespace">
<wsdl:types>
<xs:schema targetNamespace="http://new.webservice.namespace" elementFormDefault="qualified"/>
</wsdl:types>
<wsdl:message name="greetAnfrage">
<wsdl:part name="user" type="xs:string"/>
</wsdl:message>
<wsdl:message name="greetAntwort">
<wsdl:part name="return" type="xs:string"/>
</wsdl:message>
<wsdl:portType name="TestServerPortType">
<wsdl:operation name="getResults">
<wsdl:input message="tns:greetAnfrage"/>
<wsdl:output message="tns:greetAntwort"/>
</wsdl:operation>
</wsdl:portType>
<wsdl:binding name="TestServerBinding" type="tns:TestServerPortType">
<soap:binding style="rpc" transport="http://schemas.xmlsoap.org/soap/http"/>
<wsdl:operation name="getResults">
<soap:operation soapAction="urn:#NewOperation" style="rpc"/>
<wsdl:input>
<soap:body use="literal"/>
</wsdl:input>
<wsdl:output>
<soap:body use="literal"/>
</wsdl:output>
</wsdl:operation>
</wsdl:binding>
<wsdl:service name="TestServerService">
<wsdl:port name="TestServerPort" binding="tns:TestServerBinding">
<soap:address location="http://92.79.135.41/soap/server.php"/>
</wsdl:port>
</wsdl:service>
</wsdl:definitions>
If i testing the Error "GENERAL ERROR - PART UNKNOWN (NULL) occur. A payload trace with SRT_UTIL i show a correct response.
Maybe you are looking for
-
Is it possible to change the "From Email Address in workflow"
I have a created a task list and set a workflow for the list. Workflow Actions: 1. Send a Email to the "Assigned To" user whenever a task is created. 2. If the Task is due, send an reminder Email and even if its not completed, send a Email to the hig
-
Upgrade to ES2 Failing while bootstrapping
We are seeing this issue when we want to upgrade from ES(8.2.1) to ES2 - OutofPlace upgrade. DB is been refreshed from ES and migrated to 11gr2, when initiated DB, its failing at 50% with below error. Techstack: ES2/WAS7.0.0.17/Oracle 11gr2/AIX 6.1.
-
Hi to the Mac Folks, I have 10.6.8 and have installed two new printers HP 8610 and an Epson 7880 and can not find the Page Set-up menu anywhere in the applications I a trying to print from. This is regardless of either printer selected. I primarily p
-
LOV for an unbound input field in ADF-JSP
Hi i have a web app using ADF BC, struts , JSP. Jdev - 10.1.2 JHS - 10.1.2 I have a text field <input type="text" value="solution"> I need to populate this UNBOUND input field with a value from an LOV which pops up in a separate window. I need help r
-
Data Services job server crashed and won't start backup
Hello, I was running some jobs on data services 4.2 sp3 windows server 2012R2 and they all failed and the job server went down. None of the jobs that failed had an trace file or error log in the management console. Now i am unable to open data servi