0 SUBMITTED, 0 SUCCESS, 0 FAIL.
Hi All,
Version: BPC 7.0
I am facing the issue in balance carry forward. I am running the data package for Carry forward but everytime I am getting "0 SUBMITTED, 0 SUCCESS, 0" FAIL and no records gets selected.
I have setup every property mentioned in the How to. I have gone through the forums also but not able to track the problem.
Properties I have setup:
copyopening: 'I' , monthnum = 12 , datasrc_type = 'I' , category_for_ope = 'ACTUAL' , opening_period = 2009.JAN, opening_year = 2009, flow_type = 'OPENING' and 'CLOSING' , openingdatasrc = 'INPUT'.
Script Logic
*RUN_PROGRAM COPYOPENING
CATEGORY= %C_CATEGORY_SET%
TID_RA = %TIME_SET%
CURRENCY = %GROUPS_SET%
OTHER = [ENTITY=%ENTITY_SET%]//For More than one other scope parameters: OTHER = [ENTITY=%ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Any help is appreciated.
My system is ok,
I did some other test.
I run another two functions COPYOPENING and CALC_ACCOUNT with the same data range selections
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
CALC=RE1
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Entity: value 100
Category: actual
Rptcurrency,LC
time: 2010.Dec
The satus for both of them are "SUCCESS", but for function "COPYOPENING", I get "0 SUBMITTED, 0 SUCCESS, 0 FAIL" while for "CALC_ACCOUNT " function. I get "1 SUBMITTED, 1 SUCCESS, 0 FAIL" this means that the data region selection is ok.
Edited by: Jianbai on Feb 9, 2011 12:04 AM
Similar Messages
-
Error 0 SUBMITTED, 0 SUCCESS, 0 FAIL in US Elimination
HI, experts! I have a problem with BO 7.5 US Elimination program, in CONSOLIDATION dimension. I have done all options and tasks according help instructions (http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htm),
I have a script logic
*RUN_PROGRAM US_ELIM
CATEGORY = %CATEGORY_SET%
RPTCURRENCY = %RPTCURR_SET%
TID_RA = %TIME_SET%
ENTITY=%ENTITY_SET%
*ENDRUN_PROGRAM
But there is a bad error:
0 SUBMITTED, 0 SUCCESS, 0 FAIL in the Formula log of package status.
P.S. I've checked all data in my dimensions according http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htmMy system is ok,
I did some other test.
I run another two functions COPYOPENING and CALC_ACCOUNT with the same data range selections
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
CALC=RE1
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Entity: value 100
Category: actual
Rptcurrency,LC
time: 2010.Dec
The satus for both of them are "SUCCESS", but for function "COPYOPENING", I get "0 SUBMITTED, 0 SUCCESS, 0 FAIL" while for "CALC_ACCOUNT " function. I get "1 SUBMITTED, 1 SUCCESS, 0 FAIL" this means that the data region selection is ok.
Edited by: Jianbai on Feb 9, 2011 12:04 AM -
Has anyone submitted a successful application for the up-to-date program?
has anyone submitted a successful application for the up-to-date program? I submitted my application 2 days ago and when I log on it's still under review. Has anyone had difficulty with this? When they finally get back to me am I likely to be offered iworks? - I've fulfilled all criteria, I just wonder whether they expect me to jump through any more hoops
Change your Mac's System Preferences to English and go to the Mac App Store and you should see it for free.
Otherwise see the Apple Up-To-Date Program:
http://www.freeforum101.com/iworktipsntrick/viewtopic.php?t=429&mforum=iworktips ntrick
Peter -
Profile Identifier: 2, Service Type: Conferencing
TCP packets rx 2549, tx 2439
Unsupported pkts rx 0, Unrecognized pkts rx 0
Register tx 1, successful 1, rejected 0, failed 0
Unregister tx 0, successful 0
KeepAlive tx 2322, successful 2322, failed 0
OpenReceiveChannel rx 56, successful 56, failed 0
CloseReceiveChannel rx 56, successful 56, failed 0
StartMediaTransmission rx 56, successful 86, failed 0
StopMediaTransmission rx 56, successful 56, failed 56
Profile Identifier: 3, Service Type: MTP
TCP packets rx 3241, tx 4171
Unsupported pkts rx 0, Unrecognized pkts rx 0
Register tx 1, successful 1, rejected 0, failed 0
Unregister tx 0, successful 0
KeepAlive tx 2322, successful 2322, failed 0
OpenReceiveChannel rx 142, successful 142, failed 0
CloseReceiveChannel rx 142, successful 142, failed 0
StartMediaTransmission rx 142, successful 149, failed 0
StopMediaTransmission rx 142, successful 71, failed 142
PortReq rx 92
PortRes tx 92, successful 92, failed 0
PortClose rx 3This still sounds that a proxy is being used.
What are the current connection settings?
*Tools > Options > Advanced > Network : Connection > Settings
If you do not need to use a proxy to connect to internet then try to select "No Proxy" if "Use the system proxy settings" or one of the others do not work properly.
Boot the computer in Windows Safe Mode with network support (press F8 on the boot screen) as a test to see if this helps. -
hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh. -
ASA - log successful and failed logons to syslog server?
Hello,
How can I log successful and failed SSH and ADSM logons to our syslog server?
ThanksHi,
I haven't really touched the default logging configurations much but some firewalls that I manage have "logging trap informational" which sends messages of users connecting to the firewall.
The messages shows which username was used and if it was rejected or accepted. These messages all seem to be of the "informational" / "level 6" syslog messages.
The syslog IDs for them are:
ASA-6-113008
ASA-6-113012
ASA-6-113015
Though these messages only show information about the AAA not which type of connection was used (I tried both SSH and ASDM to see)
I'm sure there are more messages that will show additional information about the connection and also what the logged user did on the firewall during the management connection.
- Jouni -
How to send e-mail alert to the user job is successful or failed.
Hi Experts,
I have scheduled a job using DBMS_JOB Package; in this job I am calling a procedure.
How can we send an e-mail(alert) to the user if the job is successful (or) job fails.
If the job is successfully completed, then we have to send mail as “Job is completed successfully along with job name”.
If the job fails we have to send email as “error message of the job along with job name”(why the job is failed).
This alert should be sending automatically no manual intervention.
Please help me.
CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
IS
CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
FROM apps_global.control_ram
WHERE id = p_id
ORDER BY id, table_name;
BEGIN
FOR I IN C
LOOP
EXECUTE IMMEDIATE
'INSERT INTO '
|| I.ARCHIVE_TABLE_NAME
|| '
(SELECT * FROM '
|| I.TABLE_NAME
|| ' WHERE '
|| I.WHERE_CONDITION
|| ')';
EXECUTE IMMEDIATE
'DELETE FROM '
|| I.TABLE_NAME
|| ' WHERE '
|| I.WHERE_CONDITION
|| '';
COMMIT;
END LOOP;
EXCEPTION
WHEN OTHERS
THEN
ROLLBACK;
DBMS_OUTPUT.PUT_LINE (
'An error was encountered - ' || SQLCODE || ' -ERROR- ' || SQLERRM);
END arc_procedure;
/This is my job.
DECLARE
X NUMBER;
BEGIN
SYS.DBMS_JOB.SUBMIT
( job => X
,what => 'APPS.arc_procedure(1);'
,next_date => to_date('05/01/2013 00:00:00','dd/mm/yyyy hh24:mi:ss')
,interval => 'TRUNC(SYSDATE+1)'
,no_parse => FALSE
SYS.DBMS_OUTPUT.PUT_LINE('Job Number is: ' || to_char(x));
COMMIT;
END;
/Thanks in advance.Hi,
I think you can do by creating mailing procedures and call it in the loop and outside the loop.
There would be two procedure one in inside loop which will execute after successfull completion of the loop.
Other would be in the exception block like i shown in the below code you have written;
V_variable_1 you can use as a parameter for what is the error occured.
like suppose your mailing procedure name is Status_email and Status_email_1.
CREATE OR REPLACE PROCEDURE APPS_GLOBAL.arc_procedure (P_ID IN NUMBER)
IS
CURSOR C IS SELECT id,table_name,archive_table_name,where_condition
FROM apps_global.control_ram
WHERE id = p_id
ORDER BY id, table_name;
V_VARIABLE_1 NUMBER;
V_VARIABLE_2 VARCHAR2(400);
BEGIN
FOR I IN C
LOOP
EXECUTE IMMEDIATE
'INSERT INTO '
|| I.ARCHIVE_TABLE_NAME
|| '
(SELECT * FROM '
|| I.TABLE_NAME
|| ' WHERE '
|| I.WHERE_CONDITION
|| ')';
EXECUTE IMMEDIATE
'DELETE FROM '
|| I.TABLE_NAME
|| ' WHERE '
|| I.WHERE_CONDITION
|| '';
COMMIT;
STATUS_EMAIL;
END LOOP;
EXCEPTION OTHERS THEN
V_VARIABLE_1 :=SQLCODE;
V_VARIABLE_2 :=SQLERRM;
ROLLBACK;
STATUS_EMAIL_1(V_VARIABLE_1,V_VARIABLE_2);
END arc_procedure;
/ You can refer to sample email procedure i have created for you.
CREATE OR REPLACE PROCEDURE STATUS_EMAIL
AS
v_From VARCHAR2(80) := 'EMAIL_ID';
v_Recipient VARCHAR2(80) := 'EMAIL_ID';
--YOU CAN SEND EMAIL TO MORE THAT ONE USER SO YOU CAN USE LIKE BELOW VARIABLE....
v_Recipienttt VARCHAR2(80) := 'EMAIL_ID';
v_Subject VARCHAR2(80) := 'SUBJECT_FOR_THE_MAIL';
v_Mail_Host VARCHAR2(30) := 'MAIL_SERVERS_HOST_IP(SMTP_SERVER)';
v_Mail_Conn utl_smtp.Connection;
crlf VARCHAR2(2) := chr(13)||chr(10);
BEGIN
v_Mail_Conn := utl_smtp.Open_Connection(v_Mail_Host);
utl_smtp.Helo(v_Mail_Conn, v_Mail_Host);
utl_smtp.Mail(v_Mail_Conn, v_From);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipient);
utl_smtp.Rcpt(v_Mail_Conn, v_Recipienttt);
--OPEN DATA CONNNECTION
UTL_SMTP.OPEN_DATA(v_mail_conn);
--MAIL HEADER
utl_smtp.write_DATA(v_Mail_Conn,'Date: ' || to_char(sysdate, 'DD-MON-YYYY hh:mi:ss AM') || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'From: ' || v_From || crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Subject: '|| v_Subject || ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,'To: ' || v_Recipient || crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Cc: ' || v_Recipienttt ||','|| crlf);
--MAIL BODY
utl_smtp.write_DATA(v_Mail_Conn,'MIME-Version: 1.0'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: multipart/mixed;'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,' boundary="-----SECBOUND"'|| crlf ||crlf );
utl_smtp.write_DATA(v_Mail_Conn,'-------SECBOUND'|| crlf );
utl_smtp.write_DATA(v_Mail_Conn,'Content-Type: text/plain;'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Content-Transfer_Encoding: 7bit'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Dear All, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Procedure is successfully complited without error'||'.' ||crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'Regards, '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,'any_name '|| crlf);
utl_smtp.write_DATA(v_Mail_Conn,null|| crlf);
utl_smtp.write_data(v_Mail_Conn, utl_tcp.CRLF ||'This mail is auto generated.');
--CLOSE CONNECTION
UTL_SMTP.CLOSE_DATA(v_mail_conn);
utl_smtp.Quit(v_mail_conn);
EXCEPTION
WHEN utl_smtp.Transient_Error OR utl_smtp.Permanent_Error then
raise_application_error(-20000, 'Unable to send mail: '||sqlerrm);
END;
/cheers.. -
Need to send Automatic mails when the report successful or Fail.
Hello Experts,
Created one report for reconciliation to check BW and R/3 figures.
There are exceptions designed using reporting Agent settings on the same report.
(When the values from R/3 to BW are matching it shows Green color and if the values are not matching report shows red color in the columns.)
There are some mandatory variables for Company code, Period and Currency Type.
Selections for Company code and Period are fixed but We have three currency types (00,10,30)
Reports needs to be executed for three currency types.
Requirement is that
when the report is executed for One currency type (Ex u2013 00)
If the key figure column shows Green color , Immediately mail has to be sent to necessary mail IDs saying the status successful.
If the key figure column shows Red color , Immediately mail has to be sent to necessary mail IDs saying the status Failed.
Like this the same report has to be executed for other two currency types and send the the same status as above phenomenon.
Sending mails can be taken care by BASIS people with SMTP configuration.
I want to know the development needs to be done from BW side.
Are there are any settings in BW to send the message as Successful when the report shows green color and message as failed when red color appears in the report.
Regards,
Siva.Hi,
As i understand you need to set up an alert framework.
Please check :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/b6d59590-0201-0010-5f9d-adb9f6b14d80?quicklink=index&overridelayout=true
This can also be achieved using BEx broadcaster
Please check :
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/efdbd593-0e01-0010-4eb1-a09ffedd550a?quicklink=index&overridelayout=true
Hope this helps.
-Vikram -
How to Check BPM success or fail in SXMB_MONI_BPE ?
Hi Experts
Help me...and i am new to BPM
I have done a simple BPM scenario and i am not sure it is working fine or not
So I open TS code : SXMB_MONI_BPE and here how to check the BPM
Working find or not ? if success means what is the response number?
Failure means what is the response number ?
Can any one explain me in detail....step by step of Monitoring of BPM?
Adv thanks and Points
Prasad KHi Prasad,
Two ways you can check your BPM has successfull or not.
1. Go to SXI_CACHE , Double click on Integration Process Check the Return Code has 0. If return code Non-zero, select the Integration Process and activate now it will come to the Return Code is '2' again activate and you will get Return Code as '0'.
2. Go to SXMB_MONI or SXI_MONITOR or SXMB_ADMIN
Execute the XML message, find out your message and that message has 'PE' that means that is a BPM message.
Click on PE you will see how BPM steps worked in your scenario where it failed exactly.
select the particular step and In Application toolbar there is ICON called 'Technical overview' click the buttion it shows the everything.
Regards,
Venu. -
Auditing for Successful and Failed Logon.
I have a requirement wherein I want to Audit when the user Logs In and if the user unsuccessfully tries to log in. I am using the oracle's Audit functionality to audit it.
Also I am using the oracle's audit functionality only for the above two items and have implemented the Auditing of other tables using triggers. I am not using the Oracle's Audit functionality for other purposes because the fine grained auditing is not available for the standard edition of Oracle 9i.
I want to know what is the best way to merge the Audit details from the Oracle table with the Audit Details of the Audit table which I have implemented.
Thanks
Ajay.We have a After Logon trigger in oracle but there is no trigger which will fire if the user tries to login but fails to log in. This is the reason I am using the oracle's Audit functionality for successful and unsuccessful login.
I want to know what is the best way to merge the Audit data of oracle with my Audit Data. The Audit table which I have created is somewhat similar to the Oracle's Audit table. Oracle jobs will do it but there will be performance issue since the job should fire frequently if the user wants to see the report immediately.
Thanks
Ajay. -
Trying to set up a client with external access. I just got their Edge off the domain and in the DMZ, and supposedly the appropriate firewall ports are opened. They have a RP running IIS ARR.
Microsoft Remote Connectivity Analyzer (testconnectivity.Microsoft.com) does the following for three tests:
1. When I do Lync Server Remote Connectivity Test and choose Autodiscover, it is able to open port 443 and it validates the cert. But it says "Operation failed because the network connection was not available".
2. When I do the same Lync Server Remote Connectivity Test and manually enter the Access Edge service FQDN and choose port 5061, it is able to resolve the name in DNS but it then fails testing TCP port 5061 with "The specified port is either blocked,
not listening, or not producing the expected response".
3. When I do the Lync Autodiscover Web Service Remote Connectivity Test, it fails when trying to open port 443 on the Lyncdiscover URL.
So, that seems to indicate to me that port 443 might be open on the Edge but not the Reverse Proxy, since that's where the autodiscover URL points. And it seems 5061 is not open but 443 is on the Edge. What else could I check on the Edge to get
443 working?
Thanks for the help and sorry for any vague information. Any help is appreciated!
BrandonOkay, I can now telnet to lyncdiscover.mydomain.dom on port 443 successfully, and I can telnet to sip.mydomain.com on 5061 successfully.
Now when I do the remote connectivity test:
Using Autodiscover to detect server settings, I get "Operation failed because the network connection was not available". It opens port 443 fine it looks like.
Manually choosing lync.mydomain.com as the FQDN and port 5061, I get "The endpoint was unable to register. See the ErrorCode for specific reason". Response code is 504 and response message is Server Time-out
Doing the Lync Autodiscover Web Service Remote Connectivity Test I get "HTTP 403 error was received because ISA server denied the specified URL".
Looks to me like a rule might not be set right on the firewall if ISA is denying the connection, right?(they are using TMG on a server running Server 2008 as the firewall). I can't ping the reverse proxy from the firewall (but I can ping the Edge).
What else can I check?
Thanks for all the help so far, I really appreciate it.
Brandon -
Form getting submitted even A4j validation fails +jsf
i am using a4j for checking username exists or not for onblur event
it displays the error messages when user already exists but ,if i click on
submit button after displaying the error message it gets submitted
when it comes to the required=true for inputtext it doesn't get submitted
<h:inputText id="firstName" label="#{msg['msg.firstName']}"
value="#{RegistrationBean.firstName}"
required="true" validator="#{RegistrationBean.checkFirstName}">
<a4j:support event="onblur" reRender="msg" onsubmit="true" oncomplete="true" />
</h:inputText>
public void checkFirstName(FacesContext facesContext, UIComponent component, Object value)
String name = (String) value;
if(name.trim().length()==0){
System.out.println("Name *******");
String message = bundle.getString("Name_Required");
FacesContext.getCurrentInstance().addMessage("Reg:firstName",
new FacesMessage(FacesMessage.SEVERITY_ERROR, message,message));
if(name.trim().equalsIgnoreCase("tom")){
String message = bundle.getString("Name_exists");
FacesContext.getCurrentInstance().addMessage("Reg:firstName",
new FacesMessage(FacesMessage.SEVERITY_ERROR, message,message));
}could anyone suggest me where i went wrong
thanksbean is configured as request in faces-config and also tried changing to session
-
Resent successful message failed at JDBC adapter
Hello,
I have successfully configured scenario IDOC to JDBC.
Now I have one issue that if my message passes successfully from SAP XI and get stuck at JDBC adapter (not reached to database bcoz of any reason like server is shutdown, etc).
I need to resent this message when oracle server problem is solved.
Can I resent the message which is passed successfully thru XI and stucked at Adpater side?Hi,
If the channel is inactive , it will error out in Integration Engine itself, so u can restart those messages manually.
Also, lets say the receiver system is not reachable(example JDBC), then what happens? You can find those messages in
http://host:port/MessagingSystem/monitor/monitor.jsp . In the window left frame choose Received Messages , in the right frame choose Status Not Delivered. Change the time frame and click tab(there is no enter) , u can find list of messages. Now for each message u can find two options Delete, Re-Deliver ,click on Re-Deliver the message, it will go thru.
Regards
Seshagiri -
Successful payment, failed download?
I tried to download a song on my iPhone 4 via iTunes. The payment was successful but the song did not download on my phone but it did automatically download on my iPad. How do I get the song on my phone?
Hi..
On your iPhone tap Settings > Store
Make sure Music is switched ON.
If it was already on, switch to off then back on then restart your iPhone.
Restart your device: Hold the power button until "slide to power off" appears. Slide to power off. After it is off, press the power button to turn it back on. -
Gdm-old - successive logins fail
Since an update sometime last week, after logging in via gdm-old and then logging out, it is impossible for any user to log via gdm-old without restarting the gdm-old.service. The only log message I've been able to find is
gdm-binary[24846]: WARNING: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
There is nothing in the xorg logs.
Anyone have any ideas on this?Since an update sometime last week, after logging in via gdm-old and then logging out, it is impossible for any user to log via gdm-old without restarting the gdm-old.service. The only log message I've been able to find is
gdm-binary[24846]: WARNING: gdm_slave_xioerror_handler: Fatal X error - Restarting :0
There is nothing in the xorg logs.
Anyone have any ideas on this?
Maybe you are looking for
-
Hi All, I have a z-report which displays a ALV report. when I run this in background it gets canceled. when i see the log , it has dump and dump is as shown below. A RAISE statement in the program "CL_GUI_CONTROL================CP" raised the excepti
-
My drive is partitioned into 3 logical drives. 1 - boot and appliactions (Disk Utility repairs permissions OK) 2 - CD scratch disk - Disk Utility verifies the disk OK 3 - data - Disk utility displays Verifying Disk Data but then hangs with no activit
-
Adobe Indesign keeps crashing when exporting to PDF (for certification)
Hi, We've been having more and more of these crashes of Indesign, always happens when we want to export a indesign file to a PDF. Most of the times a simple restart will fix it for a while, but the error always returns. Can someone give me a few hint
-
WRT54G V5 Cannot Disconnect PPPOE
When press the [Disconnect] button, the web set page hangs! (and internet was NOT disconnected) Is this a bug? I just bought this router (WRT54G V5) few days ago! And, how come there is no option to Manual connect/disconnect internet!!! The auto-disc
-
I have a list of dates select dt from liste Where dt> dt = 01/01/2010 and <= 01/04/2013; result 01/01/2010 03/01/2010 04/01/2010 how to make a sql to detect the missing dates example is missing on 02/01/2010