Error 0 SUBMITTED, 0 SUCCESS, 0 FAIL in US Elimination
HI, experts! I have a problem with BO 7.5 US Elimination program, in CONSOLIDATION dimension. I have done all options and tasks according help instructions (http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htm),
I have a script logic
*RUN_PROGRAM US_ELIM
CATEGORY = %CATEGORY_SET%
RPTCURRENCY = %RPTCURR_SET%
TID_RA = %TIME_SET%
ENTITY=%ENTITY_SET%
*ENDRUN_PROGRAM
But there is a bad error:
0 SUBMITTED, 0 SUCCESS, 0 FAIL in the Formula log of package status.
P.S. I've checked all data in my dimensions according http://help.sap.com/saphelp_bpc75_nw/helpdata/en/bpc_nw_index.htm
My system is ok,
I did some other test.
I run another two functions COPYOPENING and CALC_ACCOUNT with the same data range selections
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
CALC=RE1
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Entity: value 100
Category: actual
Rptcurrency,LC
time: 2010.Dec
The satus for both of them are "SUCCESS", but for function "COPYOPENING", I get "0 SUBMITTED, 0 SUCCESS, 0 FAIL" while for "CALC_ACCOUNT " function. I get "1 SUBMITTED, 1 SUCCESS, 0 FAIL" this means that the data region selection is ok.
Edited by: Jianbai on Feb 9, 2011 12:04 AM
Similar Messages
-
0 SUBMITTED, 0 SUCCESS, 0 FAIL.
Hi All,
Version: BPC 7.0
I am facing the issue in balance carry forward. I am running the data package for Carry forward but everytime I am getting "0 SUBMITTED, 0 SUCCESS, 0" FAIL and no records gets selected.
I have setup every property mentioned in the How to. I have gone through the forums also but not able to track the problem.
Properties I have setup:
copyopening: 'I' , monthnum = 12 , datasrc_type = 'I' , category_for_ope = 'ACTUAL' , opening_period = 2009.JAN, opening_year = 2009, flow_type = 'OPENING' and 'CLOSING' , openingdatasrc = 'INPUT'.
Script Logic
*RUN_PROGRAM COPYOPENING
CATEGORY= %C_CATEGORY_SET%
TID_RA = %TIME_SET%
CURRENCY = %GROUPS_SET%
OTHER = [ENTITY=%ENTITY_SET%]//For More than one other scope parameters: OTHER = [ENTITY=%ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Any help is appreciated.My system is ok,
I did some other test.
I run another two functions COPYOPENING and CALC_ACCOUNT with the same data range selections
*RUN_PROGRAM COPYOPENING
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
*RUN_PROGRAM CALC_ACCOUNT
CATEGORY = %C_CATEGORY_SET%
CURRENCY = %RPTCURRENCY_SET%
TID_RA = %TIME_SET%
CALC=RE1
OTHER = [ENTITY=%ENTITY_SET%]
ENTITY_SET%;INTCO=%INTCO_SET%...]
*ENDRUN_PROGRAM
Entity: value 100
Category: actual
Rptcurrency,LC
time: 2010.Dec
The satus for both of them are "SUCCESS", but for function "COPYOPENING", I get "0 SUBMITTED, 0 SUCCESS, 0 FAIL" while for "CALC_ACCOUNT " function. I get "1 SUBMITTED, 1 SUCCESS, 0 FAIL" this means that the data region selection is ok.
Edited by: Jianbai on Feb 9, 2011 12:04 AM -
hello,
when i try creating projects in Project center am posted on with this error.
Your new XXXX workflow has been created successfully, but
failed to publish and will not be listed in the Project Center.For more information on the failure, visit the My Queue Jobs page or contact your administrator.
Any help would be appreciated!!!!!
Thanks regards, Vignesh.hello Rouyre,
Thanks for ur reply
Am using
Microsoft Project Server 2013
15.0.4420.1017
Yes! It is Custom EPT with Custom Workflow(Declarative Workflow) built through VS2012
after associating the Site workflow with EPT i try creating Projects using my Custom EPT since then am posted on with this error.
ULS Error:Log
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
Standard Information:PSI Entry Point: <unknown> Project User: <unknown> Correlation Id: <unknown> PWA Site URL: SA Name: <unknown> PSError: <unknown> A queue job has failed. This is a general
error logged by the Project Server Queue everytime a job fails - for effective troubleshooting use this error message with other more specific error messages (if any), the Operations guide (which documents more details about queued jobs) and the trace log
(which could provide more detailed context). More information about the failed job follows. GUID of the failed job: 39cd36d6-3603-e411-b33e-00155d00091f. Name of the computer that processed this job: 3eebbc1d-7558-4050-bf5d-d985b23b89f5 (to debug further,
you need to look at the trace log from this computer). Failed job type: ReportWorkflowProj...
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03* Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue
ad3fy Critical
...ectDataSync. Failed sub-job type: ReportWorkflowProjectDataSyncMessage. Failed sub-job ID: 1. Stage where sub-job failed: (this is useful when one sub-job has more than one logical processing stages).
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fy Medium
Error is: GeneralQueueJobFailed. Details: Queue Attributes: 39cd36d6-3603-e411-b33e-00155d00091f 3eebbc1d-7558-4050-bf5d-d985b23b89f5 ReportWorkflowProjectDataSync ReportWorkflowProjectDataSyncMessage 1 2c1ea19c-5849-002d-b89f-50aaf0a752fd
. Standard Information: , LogLevelManager Warning-ulsID:0x000DD158 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.03 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Project Server Database
ah91z Medium
Successfully got the connection string (database name=[ProjectWebApp_Practice], id=1f6004ae-5d8a-41d2-81f9-e424a31484aa, type=Consolidated). Requested access level=ReadWrite: Data Source=XXXX;Initial Catalog=ProjectWebApp_Practice;Integrated Security=True;Enlist=False;Pooling=True;Min
Pool Size=0;Max Pool Size=100;Connect Timeout=15
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3fz Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f type = ReportWorkflowProjectDataSync aborted at
Message 1, LogLevelManager Warning-ulsID:0x000DD159 has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
07/04/2014 10:21:38.04 Microsoft.Office.Project.Server (0x1840)
0x06B8 Project Server
Queue Jobs
ad3f2 Medium
PWA:http://XXXX:10000/PWAPactice, ServiceApp:Project Server Service Application, User:PROJECTSERVER\system, PSI: [QUEUE] receiver http://XXXX:10000/PWAPactice: Group 3bcd36d6-3603-e411-b33e-00155d00091f correlation 82705dc5-3603-e411-b33e-00155d00091f
type = ReportWorkflowProjectDataSync failed at Message 1 Errors: GeneralQueueJobFailed, LogLevelManager Warning-ulsID:0x000DD15C has no entities explicitly specified.
2c1ea19c-5849-002d-b89f-50aaf0a752fd
Thanks regards, Vignesh. -
Getting error in mailing program :Cause: FDPSTP failed due to ORA-29277
in the following program i am submitting a request and sending concurrent program log file (.REQ file)as an attachment but getting
following error,plese tell me where i am wrong
ORACLE error 29277 in FDPSTP
Cause: FDPSTP failed due to ORA-29277: invalid SMTP operation
ORA-06512: at "SYS.UTL_SMTP", line 44
ORA-06512: at "SYS.UTL_SMTP", line 150
ORA-06512: at "SYS.UTL_SMTP", line 383
ORA-06512: at "SYS.UTL_SMTP", line 399
ORA-0651
code:
CREATE OR REPLACE PACKAGE BODY APPS.xx_create_acct
AS
PROCEDURE submit_request(
errbuf OUT VARCHAR2,
retcode OUT VARCHAR2,
Source_Application varchar2,
Application number,
Dummy_Parameter_0 varchar2,
Ledger number,
Process_Category varchar2,
End_Date varchar2,
Create_Accounting_Flag varchar2,
Dummy_Parameter_1 varchar2,
Accounting_Mode varchar2,
Dummy_Parameter_2 varchar2,
Errors_Only_Flag varchar2,
Report varchar2,
Transfer_to_GL_Flag varchar2,
Dummy_Parameter_3 varchar2,
Post_to_GL_Flag varchar2,
GL_Batch_Name varchar2,
Mixed_Currency_Precision Number,
Include_Zero_Amt_Lines_Flag varchar2,
Request_ID varchar2,
Entity_ID Number,
Source_Application_Name varchar2,
Application_Name varchar2,
Ledger_Name varchar2,
Process_Category_Name varchar2,
Create_Accounting varchar2,
Accounting_Mode_Name varchar2,
Errors_Only varchar2,
Report_Level varchar2,
Transfer_to_GL varchar2,
Post_in_GL varchar2,
Include_Zero_Amount_Lines varchar2,
Valuation_Method varchar2,
Security_ID_Integer_1 varchar2,
Security_ID_Integer_2 varchar2,
Security_ID_Integer_3 varchar2,
Security_ID_Char_1 varchar2,
Security_ID_Char_2 varchar2,
Security_ID_Char_3 varchar2,
Concurrent_Request_ID number,
P_INCLUDE_USER_TRX_ID_FLAG varchar2,
P_INCLUDE_USER_TRX_IDENTIFIERS varchar2,
P_DEBUG_FLAG varchar2
IS
l_senderemail VARCHAR2 (2000) := '[email protected]';
l_request_id NUMBER;
errmsg VARCHAR2 (1000);
req_id NUMBER;
phase VARCHAR2 (200);
status VARCHAR2 (200);
dphase VARCHAR2 (200);
dstatus VARCHAR2 (200);
MESSAGE VARCHAR2 (200);
wait_stat BOOLEAN;
l_file_name VARCHAR2 (200);
l_file_path VARCHAR2 (2000);
crlf VARCHAR2 (4) := CHR (13) || CHR (10);
v_set_layout_option BOOLEAN;
dir_name varchar2(100);
/* CURSOR req_status
IS
SELECT SUBSTR (outfile_name, 55, 23) filename,
SUBSTR (outfile_name, 1, 64) outfilepath
FROM applsys.fnd_concurrent_requests
WHERE request_id = l_request_id
AND phase_code = 'C'
AND status_code = 'C';*/
directory_path VARCHAR2 (2000);
lv_subject VARCHAR2 (100);
lv_msg VARCHAR2 (700);
lv_msghdr VARCHAR2 (100);
lv_pdf_filename VARCHAR2 (200);
BEGIN
apps.fnd_global.apps_initialize
(user_id => apps.fnd_global.user_id,
resp_id =>apps.fnd_global.resp_id,
resp_appl_id => apps.fnd_global.resp_appl_id
l_request_id :=
apps.fnd_request.submit_request
( 'BOM',
'CSTCRACCRCV',
NULL,
NULL,
FALSE,
Source_Application,
Application ,
Dummy_Parameter_0,
Ledger ,
Process_Category,
End_Date ,
Create_Accounting_Flag,
Dummy_Parameter_1 ,
Accounting_Mode ,
Dummy_Parameter_2,
Errors_Only_Flag,
Report ,
Transfer_to_GL_Flag,
Dummy_Parameter_3,
Post_to_GL_Flag ,
GL_Batch_Name ,
Mixed_Currency_Precision,
Include_Zero_Amt_Lines_Flag,
Request_ID ,
Entity_ID,
Source_Application_Name,
Application_Name,
Ledger_Name ,
Process_Category_Name,
Create_Accounting ,
Accounting_Mode_Name,
Errors_Only ,
Report_Level,
Transfer_to_GL,
Post_in_GL ,
Include_Zero_Amount_Lines,
Valuation_Method ,
Security_ID_Integer_1,
Security_ID_Integer_2,
Security_ID_Integer_3,
Security_ID_Char_1 ,
Security_ID_Char_2 ,
Security_ID_Char_3 ,
Concurrent_Request_ID,
P_INCLUDE_USER_TRX_ID_FLAG,
P_INCLUDE_USER_TRX_IDENTIFIERS,
P_DEBUG_FLAG
COMMIT;
IF (l_request_id <= 0)
THEN
errmsg := apps.fnd_message.get ();
ELSE
wait_stat :=
apps.fnd_concurrent.wait_for_request (l_request_id,
10,
360,
phase,
status,
dphase,
dstatus,
MESSAGE
IF dphase = 'COMPLETE'
THEN
dir_name :='XX_CREATE_ACCT_LOG';
l_file_name := 'l' || l_request_id || '.REQ';
lv_subject := NULL;
lv_msg := NULL;
lv_msghdr := NULL;
lv_pdf_filename := NULL;
lv_subject := 'testing mail :Request for Create Accounting not completed';
lv_msg :=
'Please find attachement here with the Status Of Create Accounting Reciving from cost management'
|| crlf;
lv_msghdr := 'Dear Sir' ;
lv_pdf_filename := l_file_name;
send_mail (l_senderemail,
'[email protected]',
lv_subject,
lv_msghdr,
lv_msg,
lv_pdf_filename,
'text/application',
dir_name
END IF;
END IF;
END submit_request;
PROCEDURE send_mail (
p_sender IN VARCHAR2,
p_recipient IN VARCHAR2,
p_subject IN VARCHAR2,
p_mailbodyhdr IN VARCHAR2,
p_mailbody IN VARCHAR2,
p_filename IN VARCHAR2,
p_filetype IN VARCHAR2,
dir_name in VARCHAR2
AS
v_msg VARCHAR2 (32000);
src_file BFILE;
i INTEGER := 1;
v_raw RAW (500);
v_length INTEGER := 0;
v_buffer_size INTEGER := 57;
v_mailconn UTL_SMTP.connection;
gc_crlf VARCHAR2 (4) := CHR (13)
|| CHR (10);
gc_lf VARCHAR2 (4) := CHR (10);
crlf VARCHAR2 (2) := CHR (13)
|| CHR (10);
gc_mailhost VARCHAR2 (255) := '172.16.11.2';
-- gc_maildomain VARCHAR2 (255) := 'pune.com';
msg VARCHAR2 (32767);
boundary CONSTANT VARCHAR2 (256)
:= '-----7D81B75CCC90D2974F7A1CBD';
first_boundary CONSTANT VARCHAR2 (256)
:= '--' || boundary || UTL_TCP.crlf;
last_boundary CONSTANT VARCHAR2 (256)
:= '--' || boundary || '--' || UTL_TCP.crlf;
-- A MIME type that denotes multi-part email (MIME) messages.
multipart_mime_type CONSTANT VARCHAR2 (256)
:= 'multipart/mixed; boundary="' || boundary || '"';
BEGIN
DBMS_OUTPUT.ENABLE (100000);
--fnd_file.put_line (fnd_file.output, '------------------------------------------------------' );
v_mailconn := UTL_SMTP.open_connection (gc_mailhost, 26);
UTL_SMTP.helo (v_mailconn, gc_mailhost);
UTL_SMTP.mail (v_mailconn, p_sender);
UTL_SMTP.rcpt (v_mailconn, p_recipient);
UTL_SMTP.open_data (v_mailconn);
msg :=
'Date: '
|| TO_CHAR (SYSDATE, 'Dy, DD Mon YYYY hh24:mi:ss')
|| crlf
|| 'From:[email protected] '
-- || p_sender
|| crlf
|| 'Subject: '
|| p_subject
|| crlf
|| 'To: [email protected]'
-- || p_recipient
|| crlf
|| 'MIME-Version: 3.1'
|| crlf
|| -- Use MIME mail standard
'Content-Type: multipart/mixed;'
|| crlf
|| ' boundary="-----SECBOUND"'
|| crlf
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type: text/plain;'
|| crlf
|| 'Content-Transfer_Encoding: 7bit'
|| crlf
|| crlf
|| p_mailbodyhdr
|| crlf
|| crlf
|| p_mailbody
|| crlf
|| crlf
|| crlf
|| crlf
|| -- Message body
'Regards'
|| crlf
|| 'HR and Payroll Team'
|| crlf
|| crlf
|| ' Note- Please ignore the leave status and number of days.'
|| crlf
|| crlf
|| '-------SECBOUND'
|| crlf
|| 'Content-Type'
|| ': '
|| p_filetype
|| crlf
|| 'Content-Disposition: attachment; filename="'
-- || 'Create Accounting'
-- || '.REQ'
||p_filename -- p_filename
|| '"'
|| crlf
|| 'Content-Transfer-Encoding: base64'
|| crlf
|| crlf;
UTL_SMTP.write_data (v_mailconn, msg);
src_file := BFILENAME (dir_name, p_filename);
DBMS_LOB.fileopen (src_file, DBMS_LOB.file_readonly);
v_length := DBMS_LOB.getlength (src_file);
WHILE i < v_length
LOOP
DBMS_LOB.READ (src_file, v_buffer_size, i, v_raw);
UTL_SMTP.write_raw_data (v_mailconn,
UTL_ENCODE.base64_encode (v_raw)
UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
i := i + v_buffer_size;
END LOOP while_loop;
UTL_SMTP.write_data (v_mailconn, last_boundary);
UTL_SMTP.write_data (v_mailconn, UTL_TCP.crlf);
DBMS_LOB.fileclose (src_file);
UTL_SMTP.close_data (v_mailconn);
UTL_SMTP.quit (v_mailconn);
EXCEPTION
WHEN OTHERS
THEN
UTL_SMTP.quit (v_mailconn);
DBMS_OUTPUT.put_line (SQLCODE || SQLERRM);
-- FND_FILE.PUT_LINE (FND_FILE.LOG,'error while fetching values from CO_CODE'|| SQLERRM );
END send_mail;
END xx_create_acct;Edited by: BluShadow on 18-Apr-2011 09:49
added {noformat}{noformat} tags. Please see the [url=SQL and PL/SQL FAQ and PL/SQL FAQ[/url] for info on how to post on the forumsI didn't get the information, What I want. Anyway, in the BLOB writing portion you have to create a temporary LOB and load your file into that temporary LOB and the write it into chunks.
Something like
DBMS_LOB.OPEN(v_src_loc, DBMS_LOB.LOB_READONLY); --Read the file
DBMS_LOB.CREATETEMPORARY(l_blob, TRUE); --Create temporary LOB to store the file.
v_amount := DBMS_LOB.GETLENGTH(v_src_loc); --Amount to store.
DBMS_LOB.LOADFROMFILE(l_blob, v_src_loc, v_amount); -- Loading from file into temporary LOB
/* Writing the BLOL in chunks */
WHILE l_pos < l_blob_len LOOP
DBMS_LOB.READ(l_blob, l_amount, l_pos, l_buffer);
UTL_SMTP.write_raw_data(v_connection_handle,
UTL_ENCODE.BASE64_ENCODE(l_buffer));
UTL_SMTP.WRITE_DATA(v_connection_handle, UTL_TCP.CRLF);
l_buffer := NULL;
l_pos := l_pos + l_amount;
END LOOP;For more example see these posts:
Re: Sending UTL_SMTP mail with single jpg attachment issue
Re: getting junk letters instead of photo in an email. -
The latest version of iTunes did not install properly on my Windows 7-64bit PC. I am getting the following error message: "Service 'Apple Mobile Device' failed to start. Verify that you have sufficient privileges to start system services."
I have tried the following troubleshooting steps without success:
Restart PC
Uninstall iTunes and attempt to reinstall
Verify that I am signed in as an administrator
Download and save iTunes64Setup file, right-click, and run as Administrator
Disable Norton antivirus software
Any suggestions would be greatly appreciated!Hi Iss9243,
Welcome to the Support Communities!
You've already tried some great troubleshooting steps, but the article below gives you quite a few more for this issue. Hope it helps ....
iTunes 11.1.4 for Windows: Unable to install or open
http://support.apple.com/kb/TS5376
Cheers,
- Judy -
Error while submitting order to the deployed cartridge
Hi All,
I am getting this error while submitting my test order to the deployed cartridge. Could you please let know the problem?
Fri Jan 25 19:16:08 IST 2013 <25-Jan-2013 7:16:07,641 IST PM> <INFO> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE]
ExecuteThread: '3' for queue: 'weblogic.kernel.Default (self-tuning)'> <Rolling back the database changes ...>
<25-Jan-2013 7:16:07,641 IST PM> <ERROR> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
'weblogic.kernel.Default (self-tuning)'> <Cartridge deployment failed:>
org.xml.sax.SAXParseException: Error attempting to parse XML file (href='model/SN_OrchestrationProject.xml').
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.mslv.oms.cartridgemgmt.PAR.i.a(Unknown Source)
at com.mslv.oms.cartridgemgmt.PAR.i.d(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeRequest.getXmlModelAsDocument(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.f(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.a(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Fri Jan 25 19:16:08 IST 2013 Deploy failed for cartridge SN_OrchestrationProject:
<25-Jan-2013 7:16:07,641 IST PM> <INFO> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
'weblogic.kernel.Default (self-tuning)'> <Rolling back the database changes ...>
<25-Jan-2013 7:16:07,641 IST PM> <ERROR> <cartridgemgmt.DeployCartridgeMDB> <[ACTIVE] ExecuteThread: '3' for queue:
'weblogic.kernel.Default (self-tuning)'> <Cartridge deployment failed:>
org.xml.sax.SAXParseException: Error attempting to parse XML file (href='model/SN_OrchestrationProject.xml').
at org.apache.xerces.parsers.DOMParser.parse(Unknown Source)
at org.apache.xerces.jaxp.DocumentBuilderImpl.parse(Unknown Source)
at javax.xml.parsers.DocumentBuilder.parse(DocumentBuilder.java:124)
at com.mslv.oms.cartridgemgmt.PAR.i.a(Unknown Source)
at com.mslv.oms.cartridgemgmt.PAR.i.d(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeRequest.getXmlModelAsDocument(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.f(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.a(Unknown Source)
at com.mslv.oms.cartridgemgmt.DeployCartridgeMDB.onMessage(Unknown Source)
at weblogic.ejb.container.internal.MDListener.execute(MDListener.java:574)
at weblogic.ejb.container.internal.MDListener.transactionalOnMessage(MDListener.java:477)
at weblogic.ejb.container.internal.MDListener.onMessage(MDListener.java:379)
at weblogic.jms.client.JMSSession.onMessage(JMSSession.java:4659)
at weblogic.jms.client.JMSSession.execute(JMSSession.java:4345)
at weblogic.jms.client.JMSSession.executeMessage(JMSSession.java:3821)
at weblogic.jms.client.JMSSession.access$000(JMSSession.java:115)
at weblogic.jms.client.JMSSession$UseForRunnable.run(JMSSession.java:5170)
at weblogic.work.SelfTuningWorkManagerImpl$WorkAdapterImpl.run(SelfTuningWorkManagerImpl.java:528)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)Hi, this is weird, to me it looks like a problem when deploying a cartridge, are you sure this message is printed when submitting an order?
If so, I would suggest you take a look inside your parfile which was deployed and see if there is anything obviously wrong with the file.
In which case it would be a problem of the Design Studio build scripts.
If that's the problem, you will need to report this, possibly as a workaround edit the par file and repack (which I agree is a pain in the neck).
Viktor -
Error in submiting request set from Daily Business Intelligence Administrat
I am getting the following error when submitting "ADS Incremental Financials Request Group" request set from "Daily Business Intelligence Administrator" responsibility in vision R12 instance :
APP-FND-01564: ORACLE error -1116 in SUBMIT: others
Cause: SUBMIT: others failed due to ORA-01116: error in opening database file 11
ORA-01110: data file 11: '<path>.dbf'
ORA-27041: unable to open file
SVR4 Error: 24: Too many open files
Additional information: 3.
The SQL statement being executed at the time of the error was: &SQLSTMT and was executed for the file &ERRFILE.
OS is Solaris 10.5
in a document it was suggested to increase the ulimit -n equal to ulimit -Hn and in solaris for R12 nofiles (descriptors) = 65536. Both ulimit -n and ulimit -Hn have been set to 65536 but still the error is showing.
Plz HelpppCheck Note: 549806.1 - ADS Incremental Financials Request Group errors out with APP-FND-00806
https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=549806.1 -
I'm replicating between two servers in two sites (Server A - Server 2012 R2 STD, Server B - Server 2008 R2) over a VPN (Sonicwall Firewall). Though the initial replication seems to be
happening it is very slow (the folder in question is less than 3GB). I'm seeing these in the event viewer every few minutes:
The DFS Replication service is stopping communication with partner PPIFTC for replication group FTC due to an error. The service will retry the connection periodically.
Additional Information:
Error: 1726 (The remote procedure call failed.)
and then....
The DFS Replication service successfully established an inbound connection with partner PPIFTC for replication group FTC.
Here are all my troubleshooting steps (keep in mind that our VPN is going through a SonicWall <--I increased the TCP timeout to 24 hours):
-Increased TCP Timeout to 24 hours
-Added the following values on both sending and receiving members and rebooted server
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters
Value =DisableTaskOffload
Type = DWORD
Data = 1
Value =EnableTCPChimney
Type = DWORD
Data = 0
Value =EnableTCPA
Type = DWORD
Data = 0
Value =EnableRSS
Type = DWORD
Data = 0
---------------------------------more troubleshooting--------------------------
-Disabled AntiVirus on both members
-Made sure DFSR TCP ports 135 & 5722 are open
-Installed all hotfixes for 2008 R2 (http://support.microsoft.com/kb/968429) and rebooted
-Ran NETSTAT –ANOBP TCP and the DFS executable results are listed below:
Sending Member:
[DFSRs.exe]
TCP 10.x.x.x:53 0.0.0.0:0
LISTENING 1692
[DFSRs.exe]
TCP 10.x.x.x:54669
10.x.x.x:5722 TIME_WAIT 0
TCP 10.x.x.x:54673
10.x.x.x:5722 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64773
10.x.x.x:389 ESTABLISHED 1692
[DFSRs.exe]
TCP 10.x.x.x:64787
10.x.x.x:389 ESTABLISHED 1656
[DFSRs.exe]
TCP 10.x.x.x:64795
10.x.x.x:389 ESTABLISHED 2104
Receiving Member:
[DFSRs.exe]
TCP 10.x.x.x:56683
10.x.x.x:389 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:57625
10.x.x.x:54886 ESTABLISHED 2808
[DFSRs.exe]
TCP 10.x.x.x:61759
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61760
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61763
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61764
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61770
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61771
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61774
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61775
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61776
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61777
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61778
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61779
10.x.x.x:57625 TIME_WAIT 0
TCP 10.x.x.x:61784
10.x.x.x:52757 ESTABLISHED 7472
[DFSRs.exe]
TCP 10.x.x.x:63661
10.x.x.x:63781 ESTABLISHED 4880
------------------------------more troubleshooting--------------------------
-Increased Staging to 32GB
-Opened the ADSIedit.msc console to verify the "Authenticated Users" is set with the default READ permission on the following object:
a. The computer object of the DFS server
b. The DFSR-LocalSettings object under the DFS server computer object
-Ran
ping <var>10.x.x.x</var> -f -l 1472 and got replies back from both servers
-AD replication is successful on all partners
-Nslookup is working so DNS is working
-Updated NIC drivers on both servers
- I ran the following to set the Primary Member:
dfsradmin Membership Set /RGName:<replication group name> /RFName:<replicated folder name> /MemName:<primary member> /IsPrimary:True
Then Dfsrdiag Pollad /Member:<member name>
I'm seeing these errors in the dfsr logs:
20141014 19:28:17.746 9116 SRTR 957 [WARN] SERVER_EstablishSession Failed to establish a replicated folder session. connId:{45C8C309-4EDD-459A-A0BB-4C5FACD97D44} csId:{7AC7917F-F96F-411B-A4D8-6BB303B3C813}
Error:
+ [Error:9051(0x235b) UpstreamTransport::EstablishSession upstreamtransport.cpp:808 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:532 9116 C The content set is not ready]
+ [Error:9051(0x235b) OutConnection::EstablishSession outconnection.cpp:471 9116 C The content set is not ready]
---------------------------------------more troubleshooting-----------------------------
I've done a lot of research on the Internet and most of it is pointing to the same stuff I've tried. Does anyone have any other suggestions? Maybe I need to look somewhere
else on the server side or firewall side?
I tried replicating from a 2012 R2 server to another 2012 server and am getting the same events in the event log so maybe it's not a server issue.
Some other things I'm wondering:
-Could it be the speed of the NICs? Server A is a 2012 Server that has Hyper-V installed. NIC teaming was initially setup and since Hyper-V is installed the NIC is a "vEthernet
(Microsoft Network Adapter Multiplexor Driver Virtual Switch) running at a speed of 10.0Gbps whereas Server B is running a single NIC at 1.0Gbps
-Could occasional ping timeout's cause the issue? From time to time I get a timeout but it's not as often as the events I'm seeing. I'm getting 53ms pings. The folder
is only 3 GB so it shouldn't take that long to replicate but it's been days. The schedule I have set for replication is mostly all day except for our backup times which start at 11pm-5am. Throughout the rest of the time I have it set anywhere from
4Mbps to 64 Kbps. Server A is on a 5mb circuit and Server B is on a 10mb circuit.I'm seeing the same errors, all servers are running 2008 R2 x64. Across multiple sites, VPN is steady and reliably.
185 events from 12:28:21 to 12:49:25
Events are for all five servers (one per office, five total offices, no two in the same city, across three states).
Events are not limited to one replication group. I have quite a few replication groups, so I don't know for sure but I'm running under the reasonable assumption that none are spared.
Reminder from original post (and also, yes, same for me), the error is: Error: 1726 (The remote procedure call failed.)
Some way to figure out what code triggers an Event ID 5014, and what code therein specifies an Error 1726, would extremely helpful. Trying random command line/registry changes on live servers is exceptionally unappealing.
Side note, 1726 is referenced here:
https://support.microsoft.com/kb/976442?wa=wsignin1.0
But it says, "This RPC connection problem may be caused by an unstable WAN connection." I don't believe this is the case for my system.
It also says...
For most RPC connection problems, the DFS Replication service will try to obtain the files again without logging a warning or an error in the DFS Replication log. You can capture the network trace to determine whether the cause of the problem is at the network
layer. To examine the TCP ports that the DFS Replication service is using on replication partners, run the following command in a
Command Prompt window:
NETSTAT –ANOBP TCP
This returns all open TCP connections. The connections in question are "DFSRs.exe", which the command won't let you filter for.
Instead, I used the NETSTAT command as advertised, dumping output to info.txt:
NETSTAT -ANOBP TCP >> X:\info.txt
Then I opened Excel and manually opened the .TXT for the open wizard. I chose fixed-width fields based on the first row for each result, and then added a column:
=IF(A3="Can not", "Can not obtain ownership information", IF(LEFT(A3,1) = "[", A3&B3&C3, ""))
Dragging this down through the entire file let me see that row (Row F) as the file name. Some anomalies were present but none impacted DFSrs.exe results.
Finally, you can sort/filter (I sorted because I like being able to see everything, should I choose to) to get just the results you need, with the partial rows removed from the result set, or bumped to the end.
My server had 125 connections open.
That is a staggering number of connections to review, and I feel like I'm looking for a needle in a haystack.
I'll see if I can find anything useful out, but a better solution would be most wonderful. -
Error when submitting any form (ALC-WKS-007-043)
I am getting the following error any time I submit a form using the "Complete" button inside the workspace.
An error occurred submitting the form (task xxx, form {1}). (ALC-WKS-007-043)
I have restarted the server and still get the same error!
Any idea?2008-01-08 13:17:14,625 INFO [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Trying to reconnect to JMS provider
2008-01-08 13:17:14,625 ERROR [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Reconnect failed: JMS provider failure detected:
javax.naming.NameNotFoundException: XAConnectionFactory
at org.jboss.ha.jndi.TreeHead.lookup(TreeHead.java:223)
at org.jboss.ha.jndi.HAJNDI.lookup(HAJNDI.java:134)
at sun.reflect.GeneratedMethodAccessor247.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.ha.framework.interfaces.HARMIClient.invoke(HARMIClient.java:229)
at $Proxy275.lookup(Unknown Source)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at org.jboss.ejb.plugins.jms.DLQHandler.createService(DLQHandler.java:151)
at org.jboss.system.ServiceMBeanSupport.jbossInternalCreate(ServiceMBeanSupport.java:245)
at org.jboss.system.ServiceMBeanSupport.create(ServiceMBeanSupport.java:173)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.innerStartDelivery(JMSContainerInvoker.java :605)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$ExceptionListenerImpl.run(JMSContainerInvok er.java:1471)
at java.lang.Thread.run(Thread.java:595)
2008-01-08 13:17:14,625 INFO [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Trying to reconnect to JMS provider
2008-01-08 13:17:14,625 INFO [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Trying to reconnect to JMS provider
2008-01-08 13:17:14,625 ERROR [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Reconnect failed: JMS provider failure detected:
javax.naming.NameNotFoundException: XAConnectionFactory
at org.jboss.ha.jndi.TreeHead.lookup(TreeHead.java:223)
at org.jboss.ha.jndi.HAJNDI.lookup(HAJNDI.java:134)
at sun.reflect.GeneratedMethodAccessor247.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.ha.framework.interfaces.HARMIClient.invoke(HARMIClient.java:229)
at $Proxy275.lookup(Unknown Source)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at org.jboss.ejb.plugins.jms.DLQHandler.createService(DLQHandler.java:151)
at org.jboss.system.ServiceMBeanSupport.jbossInternalCreate(ServiceMBeanSupport.java:245)
at org.jboss.system.ServiceMBeanSupport.create(ServiceMBeanSupport.java:173)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.innerStartDelivery(JMSContainerInvoker.java :605)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$ExceptionListenerImpl.run(JMSContainerInvok er.java:1471)
at java.lang.Thread.run(Thread.java:595)
2008-01-08 13:17:14,625 ERROR [org.jboss.ejb.plugins.jms.JMSContainerInvoker] Reconnect failed: JMS provider failure detected:
javax.naming.NameNotFoundException: XAConnectionFactory
at org.jboss.ha.jndi.TreeHead.lookup(TreeHead.java:223)
at org.jboss.ha.jndi.HAJNDI.lookup(HAJNDI.java:134)
at sun.reflect.GeneratedMethodAccessor247.invoke(Unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:585)
at org.jboss.ha.framework.interfaces.HARMIClient.invoke(HARMIClient.java:229)
at $Proxy275.lookup(Unknown Source)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:610)
at org.jnp.interfaces.NamingContext.lookup(NamingContext.java:572)
at javax.naming.InitialContext.lookup(InitialContext.java:351)
at org.jboss.ejb.plugins.jms.DLQHandler.createService(DLQHandler.java:151)
at org.jboss.system.ServiceMBeanSupport.jbossInternalCreate(ServiceMBeanSupport.java:245)
at org.jboss.system.ServiceMBeanSupport.create(ServiceMBeanSupport.java:173)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker.innerStartDelivery(JMSContainerInvoker.java :605)
at org.jboss.ejb.plugins.jms.JMSContainerInvoker$ExceptionListenerImpl.run(JMSContainerInvok er.java:1471)
at java.lang.Thread.run(Thread.java:595) -
I recently got a macbook Air and needed to reinstall my adobe creative suite to said new computer. I purchased creative suite online so I downloaded it from there and followed the installation instructions to a T.
I originally purchased Adobe Creative Suite in 2011 so it is version CS5.1
Everything installed successfully except Adobe Illustrator, which at the end left me this error message
ERROR: DW050: - Adobe Illustrator CS5.1_AdobeIllustrator15_1en_USLanguagePack: Install failed
ERROR: DW050: - Adobe Illustrator CS5.1: Failed due to Language Pack installation failure
how can I get illustrator on my computer?!
Hoping to sell my previous computer soon and I'm almost done transferring programs and photographs.
Thanks so much!Which language is the application?
Which language is your system?
Which system? -
LaunchFCP error when submitting content for Approval
I'm getting a 'Delivery Validation' error while submitting content for approval.
Screenshot of error.
Where can I find the logs to debug issue's like this failures.LaunchFCP refers to sending a proof. When you Submit Content for Approval, Adobe Campaign sends out a Proof to the proof target and sends a Validation Request to the Content Reviewer.
You can Open a delivery to view the error details on the Summary page. The proof does not appear on the Campaign dashboard, but you can go to the Deliveries folder under Campaign Management (default location) to see deliveries and their proofs. Proofs are a copy of the original delivery with [Proof n] in the subject line.
Generally, don't delete campaign configurations. For some configurations, when you delete them they are moved to an archive folder. For example, if I look in the Deleted deliveries folder, I can see some proofs and e-mails that you deleted. The reason your proof failed appears to be because of a missing subject line. There is a rule in Adobe Campaign that checks for this.
Hope this helps! -
Error - Connection to host as user -- failed: IOException in
From almost a week my backup on Oracle 10g stops working and getting this message on the Enterprise manager page when try to tests the back up"Error - Connection to host as user failed: IOException in sending Request :: Connection refused: connect" and On Enterprise manager home page always this error line comes up"java.lang.Exception: IOException in sending Request :: Connection refused: connect"
Please see the reply below
Oracle Enterprise Manager 10g Database Control Release 10.2.0.1.0
Copyright (c) 1996, 2005 Oracle Corporation. All rights reserved.
http://wuhvitaldb.winthrop.org:1158/em/console/aboutApplication
Oracle Enterprise Manager 10g is not running.
Logs are generated in directory D:\oracle\product\10.2.0\db_1/wuhvitaldb.winthro
p.org_CTDB/sysman/log
C:\Documents and Settings\caretrends>lsnrctl status
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 19-MAR-2012 20:06
:20
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(Key=EXTPROC)))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for 32-bit Windows: Version 10.2.0.1.0 - Produ
ction
Start Date 19-MAR-2012 18:49:40
Uptime 0 days 1 hr. 16 min. 40 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File D:\oracle\product\10.2.0\db_1\network\admin\listener.o
ra
Listener Log File D:\oracle\product\10.2.0\db_1\network\log\listener.log
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(PIPENAME=\\.\pipe\EXTPROCipc)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=wuhvitaldb.winthrop.org)(PORT=1521))
Services Summary...
Service "CTDBXDB" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
Service "CTDB_XPT" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Service "ctdb" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
The command completed successfully
LSNRCTL for 32-bit Windows: Version 10.2.0.1.0 - Production on 19-MAR-2012 20:07
:08
Copyright (c) 1991, 2005, Oracle. All rights reserved.
Connecting to (DESCRIPTION=(ADDRESS=(PROTOCOL=IPC)(Key=EXTPROC)))
Services Summary...
Service "CTDBXDB" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
Handler(s):
"D000" established:0 refused:0 current:0 max:1002 state:ready
DISPATCHER <machine: WUHVITALDB, pid: 4796>
(ADDRESS=(PROTOCOL=tcp)(HOST=wuhvitaldb.winthrop.org)(PORT=1635))
Service "CTDB_XPT" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1969 refused:0 state:ready
LOCAL SERVER
Service "PLSExtProc" has 1 instance(s).
Instance "PLSExtProc", status UNKNOWN, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:0 refused:0
LOCAL SERVER
Service "ctdb" has 1 instance(s).
Instance "ctdb", status READY, has 1 handler(s) for this service...
Handler(s):
"DEDICATED" established:1969 refused:0 state:ready
LOCAL SERVER
The command completed successfully -
Updating iphone 4 to iOS 5 - while doing the Backup I receive an error message no 402636788 - backup has failed. Can anybody tell me what this means or how I can fix this?
I am working on a Win 7 Machine and I have disabled all Firewall and Antivirus Tasks as this caused problems on an other update.Well - I synced before - that was successful - but I am a bit scared to ignore this error and just to continue? You think I should ignore that?
-
Error in report generation-Load report failed
I have installed crystal reports for VS2005 runtime in my live environment.When i try to load the report file from a .Net page i am getting the error'Error in Report generation-Load report failed'.
This works fine in development and testing but when moved to production we are having issues.
I believe i have a workaround i.e i need to open the rpt in a VS 2005 environment and re-write the connection string again.This fix had worked in development and testing when we had the same issue.
But not sure if this is a known issue with crystal reports and if so do we have any hot fixes for the same.
Please help.Hi Don,
The reason why i posted the item on 'data Connectivity issues' is because i suspect the problem is with the connection string.Though i had provided the correct connection string,re-writing the connection string with the same info might help to fix the issue with loading the report.
Does it mean that there is a problem in the connectivity?
I have a risk here that i cant re-write the connection string..i.e to open the RPT file in VS2005 and bind it.The production web server & database server sits in a third party environment and it is not in the company network.So i cant connect to this server to re-write from any other severs in the network.
Is there any fix which can applied to the server to get this issue resolved?
Cheers
Nithya. -
Error while submitting concurrent request
Hi All,
I am getting error while submitting this concurrent request (To handle deliver, RTR, RTV transactions)
Error : app-fnd-00874: Routine FDFBDF found no rows in table FND_DESCRIPTIVE_FLEXS. Please contact your system administrator or support
representative
what is this error and how can i slove this problem?
Thanks
V.ArumugamHi,
We had same problem in GL while upgradation.
Some flexfields were missing in the fnd descriptive flexfield.
We could resolve later with help of metalink.
Plz refer metalink note : Note:363117.1 and Note:290411.1
Rgds,
Arumugam S.
Maybe you are looking for
-
Photos look blurry only when using Slideshow
When I select an iPhoto album to view as a slideshow the photos appear blurry during the slideshow. When not using slideshow, when I open individual photos in iPhoto6 they appear blurred for maybe 2 seconds before snapping into sharp. The thumbnails
-
Using Ethereal with EFAH05W workgroup hub
Using Ethereal to sniff network data. Trying to capture all traffic on the subnet, but only captures TCP traffic going to the machine running Ethereal. Read that some hubs are actually 'switched' hubs, therefore will only capture data going to that
-
Creating a dichotomous key in Indesign
I'm working on a taxonomic dichotomous key. InDesign has already been useful for figure numbering and layouts for this project, but I'm wondering if anyone can help me to construct a full blown automatic #ing dicho. key in InDesign. I'm a relative no
-
**** This Question Needs Some iTunes App Experts ****
Recently replaced my iPhone and spent the last few days re-downloading the Apps/Games I used to have on my other iPhone. I've ended up with a short list of Apps that are no longer in the App Store. I've paid money for these Apps and can't redownload
-
Server 2008 TS - some client could not connect to the server
Hi guys, I have a Server 2008 x64 Terminal Server with license server (some machine) and installed device CALs. I can connect with Windows 7 client to Terminal Server by RDP (TS assign device CAL to every connected machine automatically) without prob