0BROADCASTING Template missing

Which is the template used to broadcasting in SAP BI NW2004s - is it - 0BROADCASTING_TEMPLATE or 0BROADCASTING_TEMPLATE70. My assumption is that it is 0BROADCASTING_TEMPLATE70.
But when i try to publish the query on portal i am getting the error 0BROADCASTING_TEMPLATE70 missing. I looked for the template in Business content but I can't find it there.
Any suggestions?

go to t-code RSCUSTV21& RSCUSTV27 and set your web templates...
We are using 0BROADCASTING_TEMPLATE70 for broadcasting...
You can check 0BROADCASTING_TEMPLATE70 from 3.x Web Application Designer...it will not show up in 7.x Web Application Designer
Regards,
shalin

Similar Messages

Moved: Creation of new iViews not possible because templates missing

Hello,
sorry I moved this issue to "Portal Content Development"
Creation of new iViews not possible because templates missing
Regards
Alex
Message was edited by:
Alexander Lepka

Alex,
I'd be curious to know what SAP says. We have the same problem. Not sure how/if we broke it, but we can no longer create iviews using the wizard. I opened an OSS msg a while ago, but did not get much assistance.
We have recently upgraded to 2004s and it did not resolve the issue as I hoped it would.
If SAP provides a solution for you, please post it.
Thanks,
Shelly

Outlook Integration - Snapshot templates missing when upgrade to 8.8 PL14

hello all,
We have a problem when upgrade from B1 8.8 PL10 to PL14, the snapshot template missing. We had no problems to generate snapshots in B1 8.8 PL10.
All the snapshot templates has been installed on <Servername>\B1_SHR\AddOn\Microsoft Outlook Integration\Templates\Default
And in the -GoTo meny- and select -create default templates- could not be started.
Grateful for all help.

Hi Jorg,
I quote a solution for similar case but the solution is based on client PC :
OI: Failed to create snapshot template in client machine
Symptom
You start up Outlook integration Addon in client machine. When you want to create a snapshot template, you get an error that can not create it.
Other terms
SAP Business One, Add-on, Outlook integration, OI, snapshot template, Index, Host, U_Host, BOOSTP , failed to create
Reason and Prerequisites
The index on user defined table [@BOOSTP] is not right. It does not include column U_Host.
Solution
You can run below script to fix it,
IF EXISTS (SELECT 1 FROM CUFD
WHERE AliasID = 'Host'
and TableID = '@BOOSTP')
BEGIN
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'@BOOSTPBOOSTPI1')
DROP INDEX [@BOOSTP].[@BOOSTPBOOSTPI1]
IF EXISTS (SELECT name FROM sys.indexes
WHERE name = N'BOOSTPI1')
DROP INDEX [@BOOSTP].[BOOSTPI1]
ALTER TABLE [@BOOSTP] ALTER Column U_Host nvarchar(200)
CREATE INDEX BOOSTPI1
ON [@BOOSTP](U_TplName, U_Language, U_CatID, U_Host)
IF NOT EXISTS (SELECT 1 FROM UKD1
WHERE tableName = N'@BOOSTP' and SubKeyId = 3)
Insert into UKD1 values('@BOOSTP',0,3,'Host')
END
ELSE
Print 'There is no U_Host column in @BOOSTP table!'
if the above solution can't solve it, log a message to SAP support.
JimM

'save site as template' missing SP2013

Hello!
I would like to save my webpart page as a template. The problem is that i don't see "save site as template" anywhere on this site. On another site i've created the "save site as template" is visible.
What could be the problem? I think i activated the necessary features.
Thanks.

Hi,
Open the site in SharePoint Designer, in the home page, Click on “Site Options”, you will get prompt, In the “Parameters”
Tab, you can find “SaveSiteAsTempalteEnabled”, set it to true.
For more information, see
http://microsoftechies.wordpress.com/2013/01/08/sharepoint-2013-save-site-as-template-missing/
Best Regards.
Kelly Chen
TechNet Community Support

Depoyed com.businessobjects.pct.masteriview.par but iview template missing

Hi
I have successfully deployed the com.businessobjects.pct.masteriview.par in Portal
I had taken the PAR file from the installation KIT folder of SAP Integration KIT
I have ONLY deployed the PAR and deployment was successful
I am using SAP EP 7.0 SP21
After the deployment I can not see the BusinessObjects Integration Kit -iView template in the iView creation template
I have refresh the browser, logoff and login number of times, clear the browser cache and history also.
Any suggestion what I need to do to get the BusinessObjects Integration Kit -iView template
Regards
Janak Mehta

Hi,
Do check the below forums for more details:
Do not see BusinessObjects Enterprise Integration Kit - iView template
IView Template Missing
Hope this may help you.
-Noor.

Templates missing

Somehow all my WSS templates are GONE; this includes the Default and the "Fab 40" I had installed. Not sure when/what happened, been several weeks since I've accessed our site, which is just for intranet and not yet in production.
If I run stsadm -o enumtemplates I get:
"There are no items matching the criteria specified."
When I go to Home->View All Site Content->Create this is what I see:
http://i68.photobucket.com/albums/i33/Mamba357/Work/notemplates.jpg
This is a WSS 3.0 (not upgrade) stand-alone install.
AFAIK this was working okay last time I accessed the site, as I was creating a form (a list). I've tried rebooting the server, and Deactive/Activate the Team Collaboration Lists in the Site Settings->Site Features page. ????
TIA,
M

Regarding the create list issue, I found the create list issue also may caused by the user permission for web application. I suggest you perform the steps below:
1. Open Sharepoint 3.0 Central Administration
2. Click application management > user permissions for web application
3. select the problematic web application
4. Under list permissions, check manage Lists.
5. Click OK and test the issue.
If the issue persists, please also confirm whether other checkboxes are checked under user permissions and check them.
Regarding the template missing issue, please answer the following questions. It’s important for us to narrow down the cause:
1. Does the issue occur on different site collections?
2. Does the issue occur on different webapplications?
If the issue occurs on different webapplications, I suggest run the following command to re-config resource security on this server.
PSCONFIG.EXE -cmd secureresources
More information about PSCONFIG.EXE command :
http://technet.microsoft.com/en-us/library/cc263093.aspx
If the issue persists, please check uls log and post the related error.

Template missing

Hi Experts, I am getting an error like(Template is missing : sap_sm_xls) when I am trying to export to excel , Please advice how to resolve this.. Please find the attachment.. I already talk with my basis consultant..but they are saying it is not their issue! Thanks Abhay Manna.

I just typed sap_sm.xls into google and the first hit was this;
Excel Template Missing sap_sm.xls problem. Is it abap side or basis?
But, I guess you (or your basis team) could have done that yourself.

HPDM 4.6 - _Enroll Certificate with SCEP Task Template missing

I recently upgraded our HP DM to v 4.6 as I was searching for a better way to deploy CA certificates to our t510 thin clients, and this version supports SCEP.
I also downloaded the Client Kit ThinPro-4.4-SCEP-0.0.3 software (via the Template > Import > HP FTP Software Component Browser) and this is visible in the list of Task Templates.
The problem I have is that the HP DM User Guide for this version outlines Enrolling Certificates using SCEP by double clicking on the _Enroll Certificate with SCEP task template, which I don't seem to have?
How do I obtain this particular task template?

I have already downloaded that add-on. It extracts to a .xar file, which I placed in the HP Smart Client Service\auto-update path. This is the add-on that gets pushed out to the clients at power-on.
What I need is the _Enroll Certificate with SCEP Task Template for HPDM. I've tried the template import function but I don't seem to have the necessary .jar file?
Am I missing something? I'm a bit of a noob with the HPDM software...

Sharepoint 2013 some List Templates missing in add an app

I am using sharepoint 2013. I uploaded 13 list templates in gallery but i can view only 8 templates other templates are missing when i am clicking
add an app. Whats wrong this? Thanks in advance.

Hi,
According to your description, you uploaded 13 list templates in gallery,
some List Templates were not visible on add an app page.
Let us verify the following:
What kind of template you used for the Site, publishing or Team?
Did you activate the Team Collaboration Lists feature at the site?
Compare the difference between the 13 list templates you uploaded in gallery. Probably these list templates are using different site definitions.
Here are two links similar with your issue , you can take a look at:
http://sharepointfarmer.com/deployed-list-template-is-not-visible-on-add-and-app-page-on-create/
http://www.go4sharepoint.com/Forum/uploaded-list-templates-not-appear-15885.aspx
Best Regards
Lisa Chen

Office 2010 Administrative Templates - Missing Policies

I have an Office 2010 GPO that needs to enable a policy called "Disable username and password" located at:
Computer Configuration --> Admistrative Templates --> Microsoft Office 2010 (Machine) --> IE Settings
It seems that policy, and any policy that should be there, does not exist.
I have added the admistrative template (.adm) files for the Office 2010 32-bit version. I have even added the .admx files to \\mydomain\sysvol\mydomain\Policies\PolicyDefinitions as well as added .adml files to "" ""\en-us.
Is there a step that I missed? Any help would be appreciated!
Thanks,
Jasmin

Hi Jasmin,
Before going further, I want to confirm where we got the administrative template files. Besides, we can follow the path of the central store to open
the admx file of Office 2010 to check whether some files are missing.
Regarding Administrative Template files for Office 2010, the following article can be referred to for more information.
Office 2010 Administrative Template files (ADM, ADMX, ADML) and Office Customization Tool
http://technet.microsoft.com/en-us/library/cc178992(office.14).aspx
In addition, we can try downloading the files from the following link.
Office 2010 Administrative Template files (ADM, ADMX/ADML) and Office Customization Tool download
http://www.microsoft.com/en-us/download/details.aspx?id=18968
Best regards,
Frank Shen

Missing template/missing photos

Two problems in the last 24 hours with iWeb. After publishing a new entry yesterday, I noticed that previous blog entries containing photos are now missing the photos and in their place is a gray box with an X through it and a ? in the center. Spoke with Apple Care for over an hour and they are not sure of the problem and suggested I post to this board while they work on it.
They believe it is a server problem. For some reason information (specifically photos) are getting "lost" in transit to/from my iDisk.
This morning I noticed that I can not add a new entry using my "Elegant" template because the "Elegant" template no longer exists on iWeb. Has it been removed from iWeb for some reason or is it just me?
Any ideas regarding what is happening here?
I did tell Apple Care that other iWeb uses are having the same problem with the gray boxes with the X and ? appearing in place of photos - so I am not the only one with this problem. The main concern is that some of the missing photos were published on my website MONTHS ago and those entries have not been touched since. Why would they suddnly vanish? If happened to me yesterday (with about 10 photos) it can happen again.

I'm answering my own question. Basically iWeb became corrupted and I had to reinstall iWeb with the help of an Apple Care Product Specialist - it took about an hour! Our guess is that I brought a corrupted photo into iPhoto and "passed" on this corruption to iWeb when I transfered photos from iPhoto to iWeb.
There have been other posts indicating similar problems, particularly with photos dissappearing and being replaced with a gray box, and X and ? mark. If this has happened to you I suggest you contact Apple Care or make an appointment at a Genius Bar to have them help you reinstall iWeb. FYI the product specialist had me publish my existing website to a folder before doing the reinstall. That way after iWeb was reinstalled, we were able to transfer my original site back to iWeb where it now runs flawlessly.

Output Module Template missing - AE CS5

Recently installed After Effects CS5 -- on every startup of the program, I get an error message:
"You have at least one output module template that refers to a missing output plug-in. Please check your Output Module Templates." Accepting this prompt leads to another:
"Adobe After Effects CS5 would like to make changes. Please type your [admin] password to allow this." Which I do, which leads the program to:
"Installing Additional File Formats and Effects" -- which takes up to 6 minutes per startup to finish (a pretty debilitating delay to my overall workflow). Once this installation is complete, and I try to open a project, it says:
"After Effects has installed additional file formats and effects. Would you like to quit After Effects so they are available?" But quitting and restarting AE CS5 only goes back to the start of this whole process over again.
How do I solve this, and get out of the infinite loop? Thanks for any suggestions!

Strange - I understand what you're implying, but the entire CS5 Master Collection was installed directly from an Adobe download with fresh, complete and legitimate serial key from Adobe. Thanks for your response, but I'm not sure that's it. There have been other users with this issue whose solutions had to do with firewall permissions and/or third-party QuickTime plug-ins, neither of which do I have.

Missing Templates & Missing Soundtrack Instruments...

On an iMac we recently did a full HD erase and clean install of Leopard. We just did a clean full install of FCS1 (5.1.4) ran all updates and it is working just fine. However in DVDSP and in Soundtrack Pro assets are missing and cannot be found...
All of the templates in DVDSP and all of the instruments and SFX in Soundtrack Pro are gone. We did a FULL install and used all of the discs the default install configuration, nothing out of the ordinary. I searched in the Machintosh HD>Library>Application Support>DVDSP folder for templates - EMPTY same for Soundtrack Pro. Is that the correct place to be looking? I tried searching in Spotlight for templates and can't find anything same with Soundtrack Pro.
I've searched around on the forums and tried others suggestions but still with no success. Any suggestions?

during installation one can elect to install or not install templates. (I choose not to install the PAL templates, for example) And if they're moved, say to a different drive, they can get lost. Reinstallation is not a big deal at all. And you may be able to install just the templates. I haven't done that in a while.

Premiere Pro Title Templates Missing

I am trying to download the Preset Title Templates for Premiere Pro.
I click on the link in Premiere and get a "Webpage Cannot Be Found" error.
Is there a correct link available?

Confirmed:
http://helpx.adobe.com/x-productkb/multi/library-functional-content-missing.html
is the URL one is redirected to if accessing the above link within PP CS6.

ADF Essentials Fusion Web Application(ADF) Templates missing

I have installed JDeveloper 11g Release 2 (11.1.2.3.0), in order to evaluate development with ADF Essentials.
The tutorial ( Developing with Oracle ADF Essentials) http://docs.oracle.com/cd/E18941_01/tutorials/jdtut_11r2_55/jdtut_11r2_55_1.html shows how to start
a new Fusion Web Application(ADF) project.
But this option is missing !!!
What am I missing ?

Combining Timo's and Shay's answers
I reproduced successfully the following
If Java EE role is selected when entering JDeveloper first time after installation of JDeveloper then
even if studio developer role is selected from the tools menu, there
is no way to get ADF Fusion development functionality as ADF Business *, ADF Model Business * features, ADF application templates, are missing.
The only valid solution is to uninstall JDeveloper and install it again ( there is no need to use generic installer) and select
studio developer the first time after installation.
It looks like ADF functionality is registered only at initial JDeveloper startup with developer role selected.
Cheers

0BROADCASTING Template missing

Similar Messages

Maybe you are looking for