0CRM infoprovider usage in BW/BI

Hi Experts,
We have an infoprovider 0CRM in our BI infoprovider list, we are planning to extract CRM datas to BI system so how can i make use of this infoprovider. Infoprovider 0CRM has lots of useful infoobjects on the functional aspect. How can i connect real time CRM data to this 0CRM infoprovider and bring it further to my BI targets. Also if anyone has any valuable methods to extract CRM data to BI pls provide us with the step by step approach, it would be a great help.
Thanks in advance
Shiva

Hi Reddy,
Thanks for all the replies for my thread.
Here will it be similar to our R/3 extraction type ( like replicating datasource to BI ) or do we need to follow any special extraction methods. pls advice
Thanks in advance
Shiva

Similar Messages

BI-Statistics: How to find out Query/InfoProvider-usage and Nav-Steps

Hi specialists,
I've got some problems to understand the figures in the bi-statistic cubes.
I found a lot information about times needed by objects.
But I didn't find the correct keyfigure yet, that tells me how often a Query was opened and how many Navigation-Step the User has done in that Query. Aggregated this would give me information about how often an InfoProvider has been used.
Could you please gimme a hint where I can find that information?
First I thought that the Keyfigure 0TCTQUCOUNT would provide me (at least a part of) this information.
But a little test showed, that this counter increased by 2 when I opened that query only once.
Even that is not constant. After having opened that Query 5 Times this key-figures reports 8.
I'm a little puzzled - maybe you can help me.
Edit: I'm using BI 7.0. Before 7.0 there existed an Cube 0BWTC_C03 which (depending on help.sap.com) provided exactly the above mentioned information. But it became obsolote in 7.0 and was replaced by the 0TCT_* cubes where I couldn't find that information yet.

One think came to my mind:
The "Manage Aggregates" dialog gives some information about the the number of times an aggregate has been used. Where does this info come from? And is there a similar information for basic-cubes?

Selection speed: Attribue only vs Attribute & Transaction.

Hi All,
There is a InfoObject which has 4 attribute.
section-department-division-office-company.
section is InfoObject. And the others are time dependent attribute.
I will allocate authority to these 5 InfoObject. In query, 4 organization except section is select by Nav.Attribute.
(1) In cube, there are transaction of section only.
(2) In cube, there are transaction of not only section but also other 4 organization.
Is there any speed difference between (1) and (2)?
In other word dimension composed with 5 organization is faster than dimension composed with section only?
Ken'ichi

hi Ken'ichi,
- put infoobject in infocube/transaction will have better performance than set as navigational attribute, though perhaps not too significant.
- in modeling, the rules is keep as small as possible, 'golden rules' in modeling infocube from bw360 course
1. small dimensions
2. few dimensions (less important then small dimension)
3. only as many details as necessary
4. characteristics in the right order (technical order >>> most selective first)
5. hierarchy only if necessary
6. time dependent structure only if necessary
7. avoid min max aggregation for key figures in huge infocube
and take a look 'efficient infoprovider usage' doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/79f6d190-0201-0010-ec8b-810a969028ec
hope this helps.

BW report usage statistics

Hello, we have BW web reports integrated in WEBAS
Is there a way to obtain some kind of usage statistics?
We need to know the top 10 used reports.
Best regards

Hello,
have a look in the technical content (Transaction: RSA1->Infoprovider>technical content->BW Statistics) there is a complete BW Datamodel which read data from rsddstat with ready-to-go queries.
Please ask if you need more advice.
Regards marcus

Characteristic Usage & Block characteristics in Planning funcitons

Hi All,
          I would like to know how to use "characteristic Usage" in planning functions, ie,, its functionality.
I have gone thru sap help regarding this, it mentions something about block characteristics being formed internally.
I am confused as to how the characteristics are termed block characteristics., and the logic behind it.
I feel that without proper knowledge about this, writing Fox formulas would be inadvisable.
Any help with examples would be appreciated. Thanks in advance.
Regards,
Tarak

In Characteristic usage tab, you choose the fields which can be changed and which can be used for conditions.
All the remaining char. which are not chosen in this tab will form a block. and the code runs for each combination these characteristics.
Cube1
Country   SalesOrg    Material    Qty    Amount
C1            SO1              M1         100
C1            SO2              M1         200
C2            SO3              M1         300
C1            SO1              M2         100
C1            SO2              M2         200
C2            SO3              M2         300
Cube2
Country        Material     Price
C1                 M1              1.1
C1                 M2              1.2
C2                 M1              1.3
C2                 M2              1.4
Now you want to calculate the amount by calculating qty * price which are at different granular level.
So you have to choose the differentiaing char. in the field to be changed which is SalesOrg, InfoProvider and Key figure name.
So the remaining char. Country, material will form as block characteristics,
So the data block is
C1 M1 -> This block contains records 1 and 2 from cube1 & 1st record from cube2.
C1 M2 -> This block contains records 3 and 6 from cube1 & 2st record from cube2.
C2 M1
C2 M2
For each combination of country and material, the code runs once.
And the code is
FOREACH SalesOrg.
{Amount, SalesOrg, Cube1} = {Qty, SalesOrg, Cube1} * {Price, #, Cube2}.
ENDFOR.
Hope this is clear. To learn how to write FOX code, check the below document.
http://www.sdn.sap.com/irj/scn/events?rid=/library/uuid/9af68206-0801-0010-029c-c586c707fc80&overridelayout=true

Qn about query usage statistics

Hello
I'm trying to find / analyze infocube usage statistics for the first time and have a few questions.
I have a 3.5 cube "ZCOLLECTIONS" on which I need to run statistics to see how often queries on that cube are used.
I see two queries under that infocube - 'Collections_1_query' and 'Collections_2_query'
I see that statistics cube 0TCT_C01 is loaded everyday.
I created a query on 0TCT_C01 and restricted the Infoprovider to ZCOLLECTIONS and query to 'Collections_1_query'. When I ran the query, it gave no results (so I guess this query is never used?)
When I tried to restrict the Infoprovider by the query Collections_2_query, it says that the query could not be found.
I can see from the query properties that it was created a few weeks back. So why would it not be found? Could it be because the query was saved in the author's favorites?
Am I looking for the statistics in the correct way ?
Any tips would be greatly appreciated!
Thanks
Karen.

Hi ,
Check this out..hope your loading stats data on a regular basis. Please check if those queries your are looking for are present in the Technical Content cubes.
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/90080703-4331-2a10-cd98-9c1e95acdea0
Thanks

Report Usage Statistics

Report Usage Statistics
v2006.0.8
We are trying to figure out how to can produce reports on the report usage statistics in our newScale/cognos environment. For example, we would like to report on what reports were run in a month and by whom, etc. so that we can get an idea of reporting activity and what reports are popular and what reports are under-utilized, etc. What do we need to do collect report usage statistics?
Found the following files in the \Program Files\Cognos\cer4\bin directory:
PPESAuditFileProcessorMsg.dll
PPESAuditFileProcessor.lib
PPESAuditFileProcessor.exp
PPESAuditFileProcessor.exe
Also found the following files in the same directory:
pwrplay.tlb
PWRPLAY.REG
PwrPlay.exe
PwrPlay.dll
Did NOT find the actual log file in that directory:
PPES_Audit.log
We know there is a cability to do this in other cognos environments we have on site, but not sure if it's available in the RequestCenter site. If it is, what do we need to do turn the logging on? Is there anything else we need to have in place before we can run reports on the audit log?

Hello,
have a look in the technical content (Transaction: RSA1->Infoprovider>technical content->BW Statistics) there is a complete BW Datamodel which read data from rsddstat with ready-to-go queries.
Please ask if you need more advice.
Regards marcus

Could not activate MI usage type

Hi all,
On our Netweaver 70 system I have deployed:
-NWMADMIN
-NWMDRIVERS
-NWMCLIENT
-NWMWDLAP
Functionally the MI seems to work OK. However when I deploy something with JSPM I get the following messages:
23.10.2008 07:49:10.574 INFO     Detecting components of the J2EE engine has finished.
23.10.2008 07:49:10.574 INFO     Activating any new usage types...
23.10.2008 07:49:10.575 INFO     Activating usage type sap.com/MI as all of its components are deployed.
23.10.2008 07:49:10.686 ERROR    com.sap.sl.ut.infoprovider.exceptions.UTInfoException: The SQL Statement is wrong : SELECT * FROM BC_SL_PARTS LEFT OUTER JO
IN BC_SL_ACTIVE_PARTS ON BC_SL_PARTS.PRODUCT_CODE=BC_SL_ACTIVE_PARTS.PRODUCT_CODE AND NAME=PART_NAME AND VENDOR=PART_VENDOR WHERE BC_SL_PARTS.PRODUCT_CODE =
? AND NAME = ? AND VENDOR = ? ORDER BY LIST_ORDER
23.10.2008 07:49:10.688 ERROR    Could not activate usage type sap.com/MI.
23.10.2008 07:49:10.689 ERROR    com.sap.sdt.jspm.deployment.usages.UsageControllerException: Could not activate necessary usage types.
Could not activate usage type sap.com/MI.
com.sap.sl.ut.infoprovider.exceptions.UTInfoException: The SQL Statement is wrong : SELECT * FROM BC_SL_PARTS LEFT OUTER JOIN BC_SL_ACTIVE_PARTS ON BC_SL_PAR
TS.PRODUCT_CODE=BC_SL_ACTIVE_PARTS.PRODUCT_CODE AND NAME=PART_NAME AND VENDOR=PART_VENDOR WHERE BC_SL_PARTS.PRODUCT_CODE = ? AND NAME = ? AND VENDOR = ? ORD
ER BY LIST_ORDER
When I look at http://<hostname>:50000/utl/UsageTypesInfo I indeed see the MI usage type not to be installed.
Does anyone know what is going wrong?
Thanks.
Regards,
Bart

Hi Oliver,
Yes, the JCO, SLD, etc.. have been setup OK. In addition, from a functional perspective everything works.
Do you think an undeploy/re-deploy could solve the problem? And will I be loosing MI data then?
Thanks,
Regards,
Bart

Problem with Firefox and very heavy memory usage

For several releases now, Firefox has been particularly heavy on memory usage. With its most recent version, with a single browser instance and only one tab, Firefox consumes more memory that any other application running on my Windows PC. The memory footprint grows significantly as I open additional tabs, getting to almost 1GB when there are 7 or 8 tabs open. This is as true with no extensions or pluggins, and with the usual set, (firebug, fire cookie, fireshot, XMarks). Right now, with 2 tabs, the memory is at 217,128K and climbing, CPU is between 0.2 and 1.5%.
I have read dozens of threads providing "helpful" suggestions, and tried any that seem reasonable. But like most others who experience Firebug's memory problems, none address the issue.
Firefox is an excellent tool for web developers, and I rely on it heavily, but have now resorted to using Chrome as the default and only open Firefox when I must, in order to test or debug a page.
Is there no hope of resolving this problem? So far, from responses to other similar threads, the response has been to deny any responsibility and blame extensions and/or pluggins. This is not helpful and not accurate. Will Firefox accept ownership for this problem and try to address it properly, or must we continue to suffer for your failings?

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

Problem with scanning and memory usage

I'm running PS CS3 on Vista Home Premium, 1.86Ghz Intel core 2 processor, and 4GB RAM.
I realise Vista only sees 3.3GB of this RAM, and I know Vista uses about 1GB all the time.
Question:
While running PS, and only PS, with no files open, I have 2GB of RAM, why will PS not let me scan a file that it says will take up 300Mb?
200Mb is about the limit that it will let me scan, but even then, the actual end product ends up being less than 100Mb. (around 70mb in most cases)I'm using a Dell AIO A920, latest drivers etc, and PS is set to use all avaliable RAM.
Not only will it not let me scan, once a file I've opened has used up "x" amount of RAM, even if I then close that file, "x" amount of RAM will STILL be unavaliable. This means if I scan something, I have to save it, close PS, then open it again before I can scan anything else.
Surely this isn't normal. Or am I being stupid and missing something obvious?
I've also monitored the memory usage during scanning using task manager and various other things, it hardly goes up at all, then shoots up to 70-80% once the 70ishMb file is loaded. Something is up because if that were true, I'd actually only have 1Gb of RAM, and running Vista would be nearly impossible.
It's not a Vista thing either as I had this problem when I had XP. In fact it was worse then, I could hardly scan anything, had to be very low resolution.
Thanks in advance for any help

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

Problem with JTree and memory usage

I have problem with the JTree when memory usage is over the phisical memory( I have 512MB).
I use JTree to display very large data about structure organization of big company. It is working fine until memory usage is over the phisical memory - then some of nodes are not visible.
I hope somebody has an idea about this problem.

55%, it's still 1.6Gb....there shouldn't be a problem scanning something that it says will take up 300Mb, then actually only takes up 70Mb.
And not wrong, it obviously isn't releasing the memory when other applications need it because it doesn't, I have to close PS before it will release it. Yes, it probably is supposed to release it, but it isn't.
Thank you for your answer (even if it did appear to me to be a bit rude/shouty, perhaps something more polite than "Wrong!" next time) but I'm sitting at my computer, and I can see what is using how much memory and when, you can't.

What causes cellular data usage to decrease if last reset has not changed? I reset every pay period cuz I do not have unlimited and was showing 125 mb sent/1.2g received. Now showing 98mb sent/980mb received. Last reset still shows same

I reset my cellular data usage every month at the beginning of my billing period so that I can keep track of how much data I am using thru out the month. I do not have the unlimited data plan and have gone over a few times. It's usually the last couple days of my billing cycle and I am charged $10 for an extra gig which I barely use 10% of before my usage is restarted for new billing cycle. FYI, they do not carry the remainder of the unused gig that you purchase for $10 which I disagree with. But have accepted. Lol Moving on.
I have two questions. One possibly being answered by the other. 1. Is cellular data used when I sync to iTunes on my home computer to load songs onto my iPhone from my iTunes library(songs that already exist)? 2. What causes the cellular data usage readings in iPhone settings/general/usage/cellular usage to decrease if my last reset has not changed? It is close to end of my billing cycle and I have been keeping close eye. Earlier today it read around 180mb sent/1.2gb received. Now it reads 90mb sent/980 mb recieved. My last reset date reads the same as before. I don't know if my sync and music management had anything to do with the decrease but i didn't notice the decrease until after I had connected to iTunes and loaded music. I should also mention that a 700mb app automatically loaded itself to my phone during the sync process. Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage? Guess turned out to be more than two questions but all related. Thanks in advance for any help you can offer me. It is information I find valuable. Sorry for the book long question.

Is cellular data used at all during any kind of sync /iPhone/iTunes management? Is the cellular data usage reading under iPhone settings a reliable source to keep track of monthly data usage?
1) No.
2) It does provide an estimated usage, but it's not accurate. For accurate determination, you should check the remaining/used MBs from the carrier (most of the carriers provide this service for free).

I am having a data excess usage issue with my Jetpack although I did not use the VZW network at all.

Background: My home does not have access to landline internet and I am relying on a Verizon Jetpack device rather than satellite cable for internet access. Within my JetPack wireless network I have several devices connected, iPADs, PC’s, printer, etc. (up to 5 devices can be connected with my system). Recently, I had one device within my immediate wireless network that I needed to transfer data via FTP to another local device within my immediate network. The receiving device FTP’d data from device (198.168.1.42) to local IP (address 192.168.1.2). To understand the data path a Trace rout for this transfer is 198.168.1.42 (source) to 198.168.1.1 (Jetpack) to 192.168.1.2 (receiver). Note that the VZW network ((cloud)/4G network) was NOT used in this transfer nor was any VZW bandwidth used for this transfer (of course less the typical overhead status/maintenance communications that happen regardless). Use of the VZW bandwidth would be something like downloading a movie from Netflix, (transferring data from a remote site, through the VZW network, into the Jetpack and to the target device). I also understand if ones devices have auto SW updates that would also go against the usage as well. I get that. My understanding of my usage billing is based data transfer across the VZW network.
Now to the problem: To my surprise I was quite substantially charged for the “internal” direct transfer of this data although I didn’t use the VZW network at all. This does not seem to be right, and doesn’t make much sense to me. Usage is should be based on the VZW network not a local Wi-Fi. In this case, Verizon actually gets free money from me without any use of or impact to the VZW network. Basically this is a VERY expensive rental for the jetpack device, which I bought anyway. Considering this, I am also charged each time I print locally. Dive into this further, I am also interested in knowing what is the overhead (non-data) communications between the jetpack router and devices and how much does that add up to over time?
Once I realized I was getting socked in bandwidth, as a temp solution I found an old Wi-Fi router, created a separate Wi-Fi network off the Jetpack, but the billing damage was already done. Switching each device back and forth to FTP and print is a hassle and there should be no reason the existing hardware couldn’t handle this and charges aligned with VSW usage. Is purposely intended by Verizon? Is this charging correct? And can I get some help with this?
Logically, usage should be based on VZW network usage not internal transfers. All transfers between IP addresses 192.168 are by default internal. Any data that needs to leave the internal network are translated in to the dynamic IP addresses established by the VZW network. That should be very easily detected for usage. In the very least, this fact needs to be clearly identified and clarified to users of the Jetpack. How would one use a local network and not get socked with usage charges? Can one set up a Wi-Fi network with another router, hardwire directly from the router to the Jetpack so that only data to and from the VZW network is billed? I might be able to figure out how to have the jetpack powered on but disable the VZW connection, but I don’t want to experiment and find out that the internal transfers are being logged and the log sent after the fact anyway once I connect…. A reasonable solution should be that users be able to use the router functions of the Jetpack (since one has to buy the device anyway) and only be billed for VZW usage.
Your help in this would be greatly appreciated. Thanks

i had one mac and spilt water on it, the motherboard fried so i had to buy a used one...being in school and all. it is a MC375lla
Model Name:
MacBook Pro
Model Identifier:
MacBookPro7,1
Processor Name:
Intel Core 2 Duo
Processor Speed:
2.66 GHz
Number of Processors:
1
Total Number of Cores:
2
L2 Cache:
3 MB
Memory:
8 GB
Bus Speed:
1.07 GHz
Boot ROM Version:
MBP71.0039.B0E
SMC Version (system):
1.62f7
Hardware UUID:
A802DE22-1E57-5509-93C5-27CEF01377B7
Sudden Motion Sensor:
State:
Enabled
i do not have a backup of it, so i am thinking about replacing my old hard drive from the water damaged into this one, not even sure if that would work, but it did not seem to be damaged, as i recovered all the files i wanted off of it to put onto this mbp
the previous owner didnt have it set to boot, they had all their settings left on it and tried to edit all the names on it, had a bunch of server info and printers etc crap on it. i do not believe he edited the terminal system though--he doesnt seem to terribly bright(if thats possible)
tbh i hate lion compared to the old one i had, this one has so many more issues-overheating,fan noise, cd dvd noise
if you need screenshots or data of anything else as away
[problem is i do not want to start from scratch if there is a chance of fixing it, this one did not come with disks or anything like my first. so i dont even know if i could, and how it sets now i am basically starting from scratch, because now all my apps are reset but working, i am hoping to get my data back somehow though, i lost all of my bookmarks and editing all my apps and setting again would be a pain

High memory usage when many tabs are open (and closed)

When I open Firefox the memory usage is about 70-100 MB RAM. When I'm working with Firefox I often open 15-20 tabs at once, then I close them and open others. Memory usage increaes up to 450 - 500 MB RAM. After closing the tabs the usage usually decreases, but after sometime. It starts decreasing very slow and never comes back to the level from the beginning. After few hours of work Firefox uses about 400 MB RAM even if one tab is open. First I thought it's because of my plugins (Firebug, Speed Dial, Adlock Plus) but I've checked it and it's not. I reinstalled Firefox but the problem occurs as well. I'm not sure if it's normal. Could you help me, please?

Hi,
Not an exact answer but please [http://kb.mozillazine.org/Reducing_memory_usage_(Firefox) see this.] The KB article ponders through various general situations which may or may not be applicable to specific instances but nevertheless could be helpful.
Useful links:
[https://support.mozilla.com/en-US/kb/Options%20window All about Tools > Options]
[http://kb.mozillazine.org/About:config Going beyond Tools > Options - about:config]
[http://kb.mozillazine.org/About:config_entries about:config Entries]
[https://addons.mozilla.org/en-US/firefox/addon/whats-that-preference/ What's That Preference? add-on] - Quickly decode about:config entries - After installation, go inside about:config, right-click any preference, enable (tick) MozillaZine Results to Panel and again right-click a pref and choose MozillaZine Reference to begin with.
[https://support.mozilla.com/en-US/kb/Keyboard%20shortcuts Keyboard Shortcuts]
[http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder & Files]
[https://support.mozilla.com/en-US/kb/Safe%20Mode Safe Mode]
[http://kb.mozillazine.org/Problematic_extensions Problematic Extensions/Add-ons]
[https://support.mozilla.com/en-US/kb/Troubleshooting%20extensions%20and%20themes Troubleshooting Extensions and Themes]

Popularity trend/usage report is not working in sp2013. Data was not being processed to EVENT STORE folder which was present under the Analytics_GUID folder.

Hi
I am working in a sharepoint migration project. We have migrated one SharePoint project from moss2007 to sp2013. Issue is when we are clicking on Popularity trend > usage report, it is throwing an error.
Issue: The data was not being processed to EVENT STORE folder which was present under the
Analytics_GUID folder. Also data was not present in the Analytical Store database.
In log viewer I have found the bellow error.
HIGH -
SearchServiceApplicationProxy::GetAnalyticsEventTypeDefinitions--Error occured: System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly
secured fault was received from the other party.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
HIGH - Getting Error Message for Exception System.Web.HttpUnhandledException
(0x80004005): Exception of type 'System.Web.HttpUnhandledException' was thrown. ---> System.ServiceModel.Security.MessageSecurityException: An unsecured or incorrectly secured fault was received from the other party.
CRITICAL - A failure was reported when trying to invoke a service application:
EndpointFailure Process Name: w3wp Process ID: 13960 AppDomain Name: /LM/W3SVC/767692721/ROOT-1-130480636828071139 AppDomain ID: 2 Service Application Uri: urn:schemas-microsoft-
UNEXPECTED - Could not retrieve analytics event definitions for
https://XXX System.ServiceModel.FaultException`1[System.ServiceModel.ExceptionDetail]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
UNEXPECTED - System.ServiceModel.FaultException`1[[System.ServiceModel.ExceptionDetail,
System.ServiceModel, Version=4.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089]]: We're sorry, we weren't able to complete the operation, please try again in a few minutes.
I have verified few things in server which are mentioned below
Two timer jobs (Microsoft SharePoint Foundation Usage Data Processing, Microsoft SharePoint Foundation Usage Data Import) are running fine.
APPFabric Caching service has been started.
Analytics_GUID folder has been
shared with
WSS_ADMIN_WPG and WSS_WPG and Read/Write access was granted
.usage files are getting created and also the temporary(.tmp) file has been created.
uasage logging database for uasage data being transported. The data is available.
Please provide pointers on what needs to be done.

Hi Nabhendu,
According to your description, my understanding is that you could not use popularity trend after you migrated SharePoint 2007 to SharePoint 2013.
In SharePoint 2013, the analytics functionality is a part of the search component. There is an article for troubleshooting SharePoint 2013 Web Analytics, please take a look at:
Troubleshooting SharePoint 2013 Web Analytics
http://blog.fpweb.net/troubleshooting-sharepoint-2013-web-analytics/#.U8NyA_kabp4
I hope this helps.
Thanks,
Wendy
Wendy Li
TechNet Community Support

0CRM infoprovider usage in BW/BI

Similar Messages

Maybe you are looking for